The led strip FA2-RGB-840OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens (white): 450 lm/m
• Efficiency (white): 30 lm/W
• Strip LED colour temperature: RGB
• Power consumption 15 W/m (150W), 24V (+0%, -15%)
• Dimmable LED strip with 8400 chips (840 chips/m)
• Led strip cuttable every 42 chips (every 5cm). Length 10 m, width 10 mm, height 3 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RGB-1080OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens (white): 400 lm/m
• Efficiency (white): 30 lm/W
• Strip LED colour temperature: RGB
• Power consumption 14 W/m (70W), 24V (+0%, -15%)
• Dimmable LED strip with 5400 chips (1080 chips/m)
• Led strip cuttable every 54 chips (every 5cm). Length 5 m, width 12 mm, height 3 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RGB-576OR0 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens (white): 195 lm/m
• Efficiency (white): 35 lm/W
• Strip LED colour temperature: RGB
• Power consumption 6 W/m (30W), 5V (+0%, -15%)
• Dimmable LED strip with 2880 chips (576 chips/m)
• Led strip cuttable every 12 chips (every 2,083cm). Length 5 m, width 8 mm, height 3 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-Co300-360OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens: 530 lm/m
• Efficiency: 50 lm/W
• Control chip: WS2811
• Pixels per meter: 30
• Strip LED colour temperature: 3000K
• Power consumption 11 W/m (55W), 24V (+0%, -15%)
• Dimmable LED strip with 1800 chips (360 chips/m)
• Led strip cuttable every 30 chips (every 8,33cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-65s-1208F1-W5 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1120 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 6500K 3 step
• Power consumption 10 W/m (50W), 12V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 3 leds (every 2,5cm). Length 5 m, external width 5 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

LED strip designed for horticulture. Due to its own spectrum of wave length this strip is suitable for stimulating the planth growth in indoor crops and hydroponic cultivation. It is not recommended to operate the 3 channels at full power unless a suitable aluminium profile is used, i.e. with a sufficiently large surface area to adequately dissipate heat. Failure to do so could result in a sharp decrease in the life of the LED in terms of hours. The led strip B52-30RB-2048O2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Led/cut point: 1) Red+Blue+Warm white: 34 2) Red: 10 3) Blue: 8 4) Warm white: 16
• LED colour temperature: 1) Red: 640nm 2) Blue: 450nm 3) Warm white: 3000K
• Dimmable LED strip with 1020 leds (204 leds/m)
• Input voltage: 24V (+0%, -15%)
• Power consumption: 1) Red+Blue+Warm white: 28,8W 2) Red: 7,2W 3) Blue: 7,2W 4) Warm white: 14,4W
• Led strip cuttable every 34 leds (every 16,67cm). Length 5 m, external width 12 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• Photosynthetic Photon Flux (PPF): 1) Red+Blue+Warm white: 52,5 umol/s 2) Red: 12,4 umol/s 3) Blue: 14,2 umol/s 4) Warm white: 29,1 umol/s
• PRF: 1) Red+Blue+Warm white: 9,7 mW 2) Red: 2,1 mW 3) Blue: 2,8 mW 4) Warm white: 5,4 mW
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

K52-40s-140822-W6 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 2835 LED
• Lumens: 1450 lm/m
• Efficiency: 145 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 11 W/m (55W), 24V (+0%, -15%)
• Dimmable LED strip with 700 leds (140 leds/m)
• Led strip cuttable every 7 leds (every 5cm). Length 5 m, external width 8 mm, height 4,5 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR5. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-40s-060822-C90 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1300 lm/m
• Efficiency: 100 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, external width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-30s-252822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 5100 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 45 W/m (225W), 24V (+0%, -15%)
• Dimmable LED strip with 1260 leds (252 leds/m)
• Led strip cuttable every 14 leds (every 5,55cm). Length 5 m, external width 20 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

The strip F52-R400-060512 is equipped with a 5050 4-in-1 led: its compact design allows RGB+4000K coloring to be enclosed in a single led. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R400-060512 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 4000K + RGB
• Lumens white 4000K: 360 lm/m
• Efficiency white 4000K: 99 lm/W
• Dimmable LED strip with 60 leds/m.
• Power consumption RGB led + monochrome led 10,8 W/m + 3,6 W/m (72W), 24V (+0%, -15%),
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, external width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The strip F52-R300-060512 is equipped with a 5050 4-in-1 led: its compact design allows RGB+3000K coloring to be enclosed in a single led. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R300-060512 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 3000K + RGB
• Lumens white 3000K: 330 lm/m
• Efficiency white 3000K: 90 lm/W
• Dimmable LED strip with 60 leds/m.
• Power consumption RGB led + monochrome led 10,8 W/m + 3,6 W/m (72W), 24V (+0%, -15%),
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, external width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-30s-2248N2-F is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2760 lm/m
• Efficiency: 150 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 20 W/m (100W), 24V (+0%, -15%)
• Dimmable LED strip with 1120 leds (224 leds/m)
• Led strip cuttable every 4 leds (every 1,78cm). Length 5 m, external width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C