Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Strip LED colour temperature: 4000K + RGB
• Lumens white 4000K: 580 lm/m
• Efficiency white 4000K: 105 lm/W
• Dimmable LED strip with 392+392 chips/m.
• Power consumption RGB led + monochrome led 7,7 W/m + 13,3 W/m (210W), 24V (+0%, -15%),
• Led strip cuttable every 56 chips (every 7,14cm). Length 10 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-40s-0608F1 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1450 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, external width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

K52-40s-0608F2 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 2835 LED
• Lumens: 1300 lm/m (estimated value)
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, external width 12 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

K52-40s-060DF2 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 2835 LED
• Lumens: 240 lm/m
• Efficiency: 115 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 4,8 W/m (24W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, external width 10 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip K52-40s-060822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1400 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, external width 12 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

The led strip F52-40s-0608H1 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1260 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, external width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The F52-400-480OD1A/2.4 LED strips feature an integrated regulation chip that stabilizes current and protects the LEDs from voltage surges typical in battery-powered systems. Thanks to their wide 11–18V power supply range, they guarantee uniform, constant light and a longer lifespan with no risk of burnout. They are perfect for motorhomes, boats, campervans, and off-grid installations. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

• Lumens: 240 lm/m
• Efficiency: 100 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 2,4 W/m (12W), 12V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 12 chips (every 2,5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The K52-400-480OD1A/4.8 LED strips feature an integrated regulation chip that stabilizes current and protects the LEDs from voltage surges typical in battery-powered systems. Thanks to their wide 11–18V power supply range, they guarantee uniform, constant light and a longer lifespan with no risk of burnout. They are perfect for motorhomes, boats, campervans, and off-grid installations. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

• Lumens: 480 lm/m
• Efficiency: 111 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 12 chips (every 2,5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The F52-400-480OD1A LED strips feature an integrated regulation chip that stabilizes current and protects the LEDs from voltage surges typical in battery-powered systems. Thanks to their wide 11–18V power supply range, they guarantee uniform, constant light and a longer lifespan with no risk of burnout. They are perfect for motorhomes, boats, campervans, and off-grid installations. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

• Lumens: 980 lm/m
• Efficiency: 109 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 10 W/m (50W), 12V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 12 chips (every 2,5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

K52-30s-060DF1 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 2835 LED
• Lumens: 475 lm/m (estimated value)
• Efficiency: 110 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, external width 10 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

The F52-300-480OD1A LED strips feature an integrated regulation chip that stabilizes current and protects the LEDs from voltage surges typical in battery-powered systems. Thanks to their wide 11–18V power supply range, they guarantee uniform, constant light and a longer lifespan with no risk of burnout. They are perfect for motorhomes, boats, campervans, and off-grid installations. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

• Lumens: 940 lm/m
• Efficiency: 100 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 10 W/m (50W), 12V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 12 chips (every 2,5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The F52-300-480OD1A/2.4 LED strips feature an integrated regulation chip that stabilizes current and protects the LEDs from voltage surges typical in battery-powered systems. Thanks to their wide 11–18V power supply range, they guarantee uniform, constant light and a longer lifespan with no risk of burnout. They are perfect for motorhomes, boats, campervans, and off-grid installations. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

• Lumens: 215 lm/m
• Efficiency: 98 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 2,4 W/m (12W), 12V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 12 chips (every 2,5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C