Led Strip by Power
Led Strip by Power
Our range of LED Strips includes many models suitable for different uses. LED strips are divided into categories to help you in finding the product that best fits your needs and projects.
In this section, led strips are classified according to Power.
The led strip FE2-40s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1620 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 14,4 W/m (720W), 24V (+0%, -15%)
- Dimmable LED strip with 6000 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 50 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip designed to get the best results in terms of lighting, with an efficiency of 130lm/W. For further information please consult LED datasheet.
The led strip F52-30s-x1288H2/13 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1500 lm/m
- Efficiency: 130 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 13 W/m (65W), 24V (+0%, -15%)
- Dimmable LED strip with 640 leds (128 leds/m)
- Led strip cuttable every 8 leds (every 6,25cm). Length 5 m, external width 8 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 1990 lm/m
- Efficiency: 85 lm/W
- Strip LED colour temperature: 3000K
- Power consumption 26 W/m (130W), 24V (+0%, -15%)
- Dimmable LED strip with 3000 chips (600 chips/m)
- Led strip cuttable every 12 chips (every 2cm). Length 5 m, width 12 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 15 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR5. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.
The led strip F52-30s-x128822-C90 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1700 lm/m
- Efficiency: 145 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 13 W/m (65W), 24V (+0%, -15%)
- Dimmable LED strip with 640 leds (128 leds/m)
- Led strip cuttable every 8 leds (every 6,25cm). Length 5 m, external width 8 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 2045 lm/m
- Efficiency: 90 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 26 W/m (130W), 24V (+0%, -15%)
- Dimmable LED strip with 3000 chips (600 chips/m)
- Led strip cuttable every 12 chips (every 2cm). Length 5 m, width 12 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 15 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-40s-1208F2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2600 lm/m
- Efficiency: 120 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 24 W/m (120W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Zig-Zag LED strips are flexible light strips designed with a wavy or zig-zag pattern, which allows them to be bent not only lengthwises, like traditional strips, but also horizontally and around curves.
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.
The led strip F52-30s-096822Z is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1060 lm/m
- Efficiency: 120 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 10 W/m (50W), 24V (+0%, -15%)
- Dimmable LED strip with 480 leds (96 leds/m)
- Led strip cuttable every 6 chips (every 6,25cm). Length 5 m, width 6 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
LED strip 5m warm white 3000K 3step 140leds/m Honglitronic 2835 24V 11W/m, PCB 6mm, IP65 extruded silicone tube with full edges (empty inside)
K52-30s-140822-W6 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- 2835 LED
- Lumens: 1400 lm/m
- Efficiency: 130 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 11 W/m (55W), 24V (+0%, -15%)
- Dimmable LED strip with 700 leds (140 leds/m)
- Led strip cuttable every 7 leds (every 5cm). Length 5 m, external width 8 mm, height 4,5 mm
- Water protection: IP65
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.
LED strip 5m white 4000K 3step 2835 140LEDs/m 24V 11,5W/m CRI Ra>90 with signal track for metal touch sensor
3-pad LED strip, specifically designed for the Metal Touch sensor SN-SL-MT-01 thanks to the central pad that transmits the detection signal. It can also be used independently (without sensor).
The led strip F52-40s-1408F2T-Ca9 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1420 lm/m
- Efficiency: 135 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 11,5 W/m (57,5W), 24V (+0%, -15%)
- Dimmable LED strip with 700 leds (140 leds/m)
- Led strip cuttable every 7 leds (every 5cm). Length 5 m, external width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip 5m warm white 3000K 3step 2835 140LEDs/m 24V 11,5W/m CRI Ra>90 with signal track for metal touch sensor
3-pad LED strip, specifically designed for the Metal Touch sensor SN-SL-MT-01 thanks to the central pad that transmits the detection signal. It can also be used independently (without sensor).
The led strip F52-30s-1408F2T-Ca9 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1345 lm/m
- Efficiency: 128 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 11,5 W/m (57,5W), 24V (+0%, -15%)
- Dimmable LED strip with 700 leds (140 leds/m)
- Led strip cuttable every 7 leds (every 5cm). Length 5 m, external width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-140822-W6 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1400 lm/m
- Efficiency: 140 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 11 W/m (55W), 24V (+0%, -15%)
- Dimmable LED strip with 700 leds (140 leds/m)
- Led strip cuttable every 7 leds (every 5cm). Length 5 m, external width 6 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
The led strip F52-30s-x1288F2/11 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1520 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 11 W/m (55W), 24V (+0%, -15%)
- Dimmable LED strip with 640 leds (128 leds/m)
- Led strip cuttable every 8 leds (every 6,25cm). Length 5 m, external width 8 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Led Strip by Power
I più venduti
The led strip F52-30s-x240DF2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2000 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
