Led Strip by Light colour
Led Strip by Light colour
Our range of LED Strips includes many models suitable for different uses. LED strips are divided into categories to help you in finding the product that best fits your needs and projects.
In this section, led strips are classified according to Light colour.
LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.
LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.
The led strip F52-CoR400-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- COB LED
- Control chip: WS2814
- Pixels per meter: 14
- Strip LED colour temperature: RGB+4000K
- Power consumption 21 W/m (105W), 24V (+0%, -15%)
- Dimmable LED strip with 3920 chips (392+392 chips/m)
- Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 10 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 20 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
COB Pixel RGB + warm white 3000K led strip 5m WS2814 chip CRI Ra>90 784leds/m 24V 21W/m
LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.
LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.
The led strip F52-CoR300-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- COB LED
- Control chip: WS2814
- Pixels per meter: 14
- Strip LED colour temperature: RGB+3000K
- Power consumption 21 W/m (105W), 24V (+0%, -15%)
- Dimmable LED strip with 3920 chips (392+392 chips/m)
- Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 10 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 20 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
COB Pixel RGB + warm white 3000K led strip 5m WS2814 chip IP65 CRI Ra>90 784leds/m 24V 21W/m
LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.
LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.
The led strip K52-CoR300-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- COB LED
- Control chip: WS2814
- Pixels per meter: 14
- Strip LED colour temperature: RGB+3000K
- Power consumption 21 W/m (105W), 24V (+0%, -15%)
- Dimmable LED strip with 3920 chips (392+392 chips/m)
- Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 12 mm, height 6 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 20 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Strip LED colour temperature: 4000K + RGB
- Lumens white 4000K: 570 lm/m
- Efficiency white 4000K: 85 lm/W
- Dimmable LED strip with 392+392 chips/m.
- Power consumption RGB led + monochrome led 7,7 W/m + 13,3 W/m (105W), 24V (+0%, -15%),
- Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 12 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 20 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Strip LED colour temperature: 3000K + RGB
- Lumens white 3000K: 420 lm/m
- Efficiency white 3000K: 75 lm/W
- Dimmable LED strip with 392+392 chips/m.
- Power consumption RGB led + monochrome led 7,7 W/m + 13,3 W/m (105W), 24V (+0%, -15%),
- Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 12 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 20 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
3838 RGB + 2835 white 4000-4250K led strip 5m 140led/m Honglitronic 24V 28,8W/m, IP67 solid silicon transparent
The L52-R400T-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip.
The led strip L52-R400T-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Strip LED colour temperature: 4000K + RGB
- Lumens white 4000K: 1875 lm/m
- Efficiency white 4000K: 140 lm/W
- Dimmable LED strip with 70+70 leds/m.
- Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
- Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 14 mm, height 5,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The F52-R40s-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.
The led strip F52-R40s-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Strip LED colour temperature: 4000K 3step + RGB
- Lumens white 4000K: 1875 lm/m
- Efficiency white 4000K: 140 lm/W
- Dimmable LED strip with 70+70 leds/m.
- Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
- Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 12 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
The K52-R40s-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip.
The led strip K52-R40s-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Strip LED colour temperature: 4000K 3step + RGB
- Lumens white 4000K: 1875 lm/m
- Efficiency white 4000K: 140 lm/W
- Dimmable LED strip with 70+70 leds/m.
- Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
- Led strip cutting points every 14 leds (every 16,5cm). Length 5000 m, width 14 mm, height 5,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 5604A VHB
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
3838 RGB + 2835 warm white 3000K 3step led strip 5m 140led/m Honglitronic 24V 28,8W/m
The F52-R30s-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.
The led strip F52-R30s-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Strip LED colour temperature: 3000K 3step + RGB
- Lumens white 3000K: 1660 lm/m
- Efficiency white 3000K: 125 lm/W
- Dimmable LED strip with 70+70 leds/m.
- Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
- Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 12 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
The K52-R30s-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip.
The led strip K52-R30s-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Strip LED colour temperature: 3000K 3step + RGB
- Lumens white 3000K: 1660 lm/m
- Efficiency white 3000K: 125 lm/W
- Dimmable LED strip with 70+70 leds/m.
- Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
- Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 14 mm, height 5,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 5604A VHB
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
3838 RGB + 2835 warm white 3000K 3step led strip 5m 140led/m Honglitronic 24V 28,8W/m, IP67 solid silicon transparent
The L52-R300T-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip.
The led strip L52-R300T-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Strip LED colour temperature: 3000K + RGB
- Lumens white 3000K: 1660 lm/m
- Efficiency white 3000K: 125 lm/W
- Dimmable LED strip with 70+70 leds/m.
- Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
- Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 14 mm, height 5,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
3838 RGB + 2835 cool white 6000K 3step led strip 5m 140led/m Honglitronic 24V 28,8W/m
The F52-R600-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.
The led strip F52-R600-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Strip LED colour temperature: 6000K 3step + RGB
- Lumens white 6000K: 1735 lm/m
- Efficiency white 6000K: 130 lm/W
- Dimmable LED strip with 70+70 leds/m.
- Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
- Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 12 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
Led Strip by Light colour
I più venduti
The led strip F52-30s-x240DF2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2000 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
