Led strip built with Honglitronic leds, version HL-AF-5060H271BU46FU79GC-S1-T1 . For further information please consult LED datasheet.

K52-RGB-060521 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 5050 LED
• Lumens (white): 370 lm/m (estimated value)
• Efficiency (white): 25 lm/W
• Strip LED colour temperature: RGB
• Led colour temperature: RGB
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

Led strip built with Honglitronic leds, version HL-AF-5060H271BU46FU79GC-S1-T1 . For further information please consult LED datasheet.

The led strip F52-RGB-60522 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Lumens (white): 370 lm/m
• Efficiency (white): 25 lm/W
• Strip LED colour temperature: RGB
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

Led strip built with Honglitronic leds, version HL-AF-5060H271BU46FU79GC-S1-T1 . For further information please consult LED datasheet.

K52-RGB-060522 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 5050 LED
• Lumens (white): 370 lm/m (estimated value)
• Efficiency (white): 25 lm/W
• Strip LED colour temperature: RGB
• Led colour temperature: RGB
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 12 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip L52-RGBT-060522 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Lumens: 370 lm/m
• Efficiency: 25 lm/W
• Strip LED colour temperature: RGB
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 12 mm, height 4,5 mm
• PCB colour: Transparent
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip FA2-RGB-840OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens (white): 450 lm/m
• Efficiency (white): 30 lm/W
• Strip LED colour temperature: RGB
• Power consumption 15 W/m (150W), 24V (+0%, -15%)
• Dimmable LED strip with 8400 chips (840 chips/m)
• Led strip cuttable every 42 chips (every 5cm). Length 10 m, width 10 mm, height 3 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RGB-1080OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens (white): 400 lm/m
• Efficiency (white): 30 lm/W
• Strip LED colour temperature: RGB
• Power consumption 14 W/m (70W), 24V (+0%, -15%)
• Dimmable LED strip with 5400 chips (1080 chips/m)
• Led strip cuttable every 54 chips (every 5cm). Length 5 m, width 12 mm, height 3 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The strip F52-R400-120512 is equipped with a 5050 4-in-1 led: its compact design allows RGB+4000K coloring to be enclosed in a single led. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R400-120512 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 4000K + RGB
• Lumens white 4000K: 780 lm/m
• Efficiency white 4000K: 90 lm/W
• Dimmable LED strip with 120 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 9 W/m (117W), 24V (+0%, -15%),
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 1,5 m power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The strip F52-R400-060512 is equipped with a 5050 4-in-1 led: its compact design allows RGB+4000K coloring to be enclosed in a single led. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R400-060512 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 4000K + RGB
• Lumens white 4000K: 360 lm/m
• Efficiency white 4000K: 99 lm/W
• Dimmable LED strip with 60 leds/m.
• Power consumption RGB led + monochrome led 10,8 W/m + 3,6 W/m (72W), 24V (+0%, -15%),
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The strip F52-R300-120512 is equipped with a 5050 4-in-1 led: its compact design allows RGB+3000K coloring to be enclosed in a single led. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R300-120512 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 3000K + RGB
• Lumens white 3000K: 850 lm/m
• Efficiency white 3000K: 90 lm/W
• Dimmable LED strip with 120 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 9 W/m (117W), 24V (+0%, -15%),
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The strip F52-R300-060512 is equipped with a 5050 4-in-1 led: its compact design allows RGB+3000K coloring to be enclosed in a single led. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R300-060512 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 3000K + RGB
• Lumens white 3000K: 330 lm/m
• Efficiency white 3000K: 90 lm/W
• Dimmable LED strip with 60 leds/m.
• Power consumption RGB led + monochrome led 10,8 W/m + 3,6 W/m (72W), 24V (+0%, -15%),
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoR400-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2814
• Pixels per meter: 14
• Strip LED colour temperature: RGB+4000K
• Power consumption 21 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 3920 chips (392+392 chips/m)
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoR300-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2814
• Pixels per meter: 14
• Strip LED colour temperature: RGB+3000K
• Power consumption 21 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 3920 chips (392+392 chips/m)
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C