Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 1230 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 6000K
• Power consumption 10,5 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 4800 chips (480 chips/m)
• Led strip cuttable every 24 chips (every 5cm). Length 10 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LA2-870W-264N12 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1230 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 8700K
• Power consumption 12 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 2640 leds (264 leds/m)
• Led strip cuttable every 8 leds (every 3,03cm). Length 10 m, width 10 mm, height 5 mm
• Silicon colour: White
• Double sided adhesive tape type: Nano Double-Sided Tape
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 1690 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 6000K
• Power consumption 15,5 W/m (155W), 24V (+0%, -15%)
• Dimmable LED strip with 5280 chips (528 chips/m)
• Led strip cuttable every 24 chips (every 4,55cm). Length 10 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED strip designed to get the best results in terms of lighting, with an efficiency of 150lm/W. For further information please consult LED datasheet.

The led strip F52-600-160822A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 3360 lm/m
• Efficiency: 150 lm/W
• Strip LED colour temperature: 6000K 3step
• Power consumption 24 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 800 leds (160 leds/m)
• Led strip cuttable every 8 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

Led strip was built with Honglitronic leds, version HL-A-2835H431W-S1-08-HR3-9000. A very narrow range of colour temperature 10000-12000K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-1000-120822/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1440 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 10000-12000K
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011s strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2 mm, height 7 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Minimum bending diameter: 4 cm
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F12-CoRGB-144510 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2812
• Pixels per meter: 144
• Strip LED colour temperature: RGB
• Power consumption 34,6 W/m (34,6W), 5V (+0%, -15%)
• Dimmable LED strip with 144 leds (144 leds/m)
• Led strip cuttable every 1 leds (every 0,69cm). Length 1 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip K252-RGB-0968ZH is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 235 lm/m
• Efficiency: 25 lm/W
• Strip LED colour temperature: RGB
• Power consumption 11 W/m (275W), 230V (+0%, -15%)
• LED strip with 2400 led (96 led/m)
• Led strip cuttable every 48 leds (every 50cm). Length 25 m, width 12 mm, height 5 mm
• PCB colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

The led strip L252-RGBT-07251H is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Lumens: 400 lm/m (estimated value)
• Efficiency: 35 lm/W
• Strip LED colour temperature: RGB
• Power consumption 12 W/m (300W), 230V (+0%, -15%)
• LED strip with 1800 led (72 led/m)
• Led strip cuttable every 36 leds (every 50cm). Length 25 m, width 12 mm, height 4,5 mm
• PCB colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011-W2. strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2,6 mm, height 1,5 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoRGB-60511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip K52-CoRGB-060511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.