Led Strip by Light colour
Led Strip by Light colour
Our range of LED Strips includes many models suitable for different uses. LED strips are divided into categories to help you in finding the product that best fits your needs and projects.
In this section, led strips are classified according to Light colour.
The led strip F52-65s-120DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1050 lm/m
- Efficiency: 120 lm/W
- Strip LED colour temperature: 6500K 3 step
- Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip 5m cool white 6500K 3step 120leds/m 2835 24V 9,6W/m, IP65 extruded silicone tube with full edges (empty inside)
K52-65s-120DF2 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- 2835 LED
- Lumens: 950 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 6500K 3 step
- Led colour temperature: 6500K 3 step
- Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 4 mm
- Water protection: IP65
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.
The led strip F52-65s-240DF1 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1900 lm/m
- Efficiency: 115 lm/W
- Strip LED colour temperature: 6500K 3 step
- Power consumption 19,2 W/m (96W), 12V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 3 leds (every 1,25cm). Length 5 m, width 12 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-65s-240DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2150 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 6500K 3 step
- Power consumption 19,2 W/m (96W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 6 leds (every 2,5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip 5m cool white 6500K 3step 60leds/m 2835 12V 4,8W/m, IP65 extruded silicone tube with full edges (empty inside)
K52-65s-060DF1 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- 2835 LED
- Lumens: 525 lm/m (estimated value)
- Efficiency: 120 lm/W
- Strip LED colour temperature: 6500K 3 step
- Led colour temperature: 6500K 3 step
- Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 4 mm
- Water protection: IP65
- PCB colour: White
- Double sided adhesive tape type: 3M 5604A VHB
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.
The led strip F52-65s-0608F2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1400 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 6500K 3 step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-65s-060DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 525 lm/m
- Efficiency: 120 lm/W
- Strip LED colour temperature: 6000K
- Power consumption 4,8 W/m (24W), 24V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip 5m cool white 6500K 3step 60leds/m 2835 24V 4,8W/m, IP65 extruded silicone tube with full edges (empty inside)
K52-65s-060DF2 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- 2835 LED
- Lumens: 525 lm/m (estimated value)
- Efficiency: 120 lm/W
- Strip LED colour temperature: 6500K 3 step
- Led colour temperature: 6500K 3 step
- Power consumption 4,8 W/m (24W), 24V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 4 mm
- Water protection: IP65
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.
LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.
LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.
The led strip F52-Co600-60511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 5050 LED
- Control chip: WS2811
- Strip LED colour temperature: 6000-6500K
- Power consumption 13 W/m (65W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip 5m white led 6000K 2835 Honglitronic 120led/m 24V 14,4W/m, IP67 solid silicon transparent
L52-600T-120822/14.4 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1300 lm/m
- Efficiency: 100 lm/W
- Strip LED colour temperature: 6000K
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 4,5 mm
- Silicon colour: Transparente
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
COB LED strip cool white 5m 6000K CRI Ra>90 486led/m 12V 6W/m PCB 5mm, IP65 extruded silicone tube with full edges (empty inside)
Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 575 lm/m (estimated value)
- Efficiency: 105 lm/W
- Strip LED colour temperature: 6000K
- Power consumption 6 W/m (30W), 12V (+0%, -15%)
- Dimmable LED strip with 2430 chips (486 chips/m)
- Led strip cuttable every 9 chips (every 1,85cm). Upper welding point every 50cm, lower welding point every 1,85cm.
- Length 5 m, width 7 mm, height 4 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 870 lm/m
- Efficiency: 95 lm/W
- Strip LED colour temperature: 6000K
- Power consumption 10 W/m (50W), 24V (+0%, -15%)
- Dimmable LED strip with 2000 chips (400 chips/m)
- Led strip cuttable every 8 chips (every 2cm). Length 5 m, width 5 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 15 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Led Strip by Light colour
I più venduti
The led strip F52-30s-x240DF2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2000 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
