Led Strip by Light colour
Led Strip by Light colour
Our range of LED Strips includes many models suitable for different uses. LED strips are divided into categories to help you in finding the product that best fits your needs and projects.
In this section, led strips are classified according to Light colour.
LED strip 10m white led 4000K 3step 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
KA2-40s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1585 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 16,5 W/m (165W), 230V (+0%, -15%)
- LED strip with 1200 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 10 m, width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
The led strip F52-40s-1208F2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2600 lm/m
- Efficiency: 120 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 24 W/m (120W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 1760 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 15,5 W/m (155W), 24V (+0%, -15%)
- Dimmable LED strip with 5280 chips (528 chips/m)
- Led strip cuttable every 24 chips (every 4,55cm). Length 10 m, width 10 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
COB LED strip 50m white 4000K 296leds/m 230V 11W/m, IP65 (extruded silicone tube with full edges and empty interior)
K502-400-296ORH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 990 lm/m (estimated value)
- Efficiency: 70 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 11 W/m (550W), 230V (+0%, -15%)
- Dimmable LED strip with 14800 chips (296 chips/m)
- Led strip cuttable every 37 chips (every 12,5cm). Length 50 m, width 10 mm, height 4,5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
LED strip 5m white 4000K 3step 2835 140LEDs/m 24V 11,5W/m CRI Ra>90 with signal track for metal touch sensor
3-pad LED strip, specifically designed for the Metal Touch sensor SN-SL-MT-01 thanks to the central pad that transmits the detection signal. It can also be used independently (without sensor).
The led strip F52-40s-1408F2T-Ca9 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1420 lm/m
- Efficiency: 135 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 11,5 W/m (57,5W), 24V (+0%, -15%)
- Dimmable LED strip with 700 leds (140 leds/m)
- Led strip cuttable every 7 leds (every 5cm). Length 5 m, width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 6000-6500K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F32-600-060820 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 475 lm/m
- Efficiency: 95 lm/W
- Strip LED colour temperature: 6000-6500K
- Power consumption 5,5 W/m (16,5W), 5V (+0%, -15%)
- Dimmable LED strip with 180 leds (60 leds/m)
- Led strip cuttable every 1 leds (every 1,67cm). Length 3 m, width 5 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
The led strip F52-50s-120DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1000 lm/m
- Efficiency: 115 lm/W
- Strip LED colour temperature: 5000K 3 step
- Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 6000-6500K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F52-600-A0822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2700 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 6000-6500K
- Power consumption 24 W/m (120W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 6000-6500K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F52-600-252822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 5500 lm/m
- Efficiency: 135 lm/W
- Strip LED colour temperature: 6000-6500K
- Power consumption 45 W/m (225W), 24V (+0%, -15%)
- Dimmable LED strip with 1260 leds (252 leds/m)
- Led strip cuttable every 14 leds (every 5,55cm). Length 5 m, width 20 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
LED strip 5m cool white 6000-6500K 30leds/m Honglitronic 2835 12V 7,2W/m current control system
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 6000-6500K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F52-600-30821A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 690 lm/m
- Efficiency: 105 lm/W
- Strip LED colour temperature: 6000-6500K
- Power consumption 7,2 W/m (36W), 12V (+0%, -15%)
- Dimmable LED strip with 150 leds (30 leds/m)
- Led strip cuttable every 3 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
LED strip 5m cool white 6000-6500K 36leds/m Honglitronic 2835 24V 8,6W/m current control system
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 6000-6500K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F52-600-36822A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 850 lm/m
- Efficiency: 105 lm/W
- Strip LED colour temperature: 6000-6500K
- Power consumption 8,6 W/m (43W), 24V (+0%, -15%)
- Dimmable LED strip with 180 leds (36 leds/m)
- Led strip cuttable every 6 leds (every 16,67cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
Zig-Zag LED strips are flexible light strips designed with a wavy or zig-zag pattern, which allows them to be bent not only lengthwises, like traditional strips, but also horizontally and around curves.
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 6000-6500K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F52-600-060821Z is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 875 lm/m
- Efficiency: 120 lm/W
- Strip LED colour temperature: 6000-6500K
- Power consumption 8 W/m (40W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 6 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
Led Strip by Light colour
I più venduti
The led strip F52-30s-x240DF2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2000 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
