Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR5. A of colour temperature 2700-6200K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-CCT-256824A-C90 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens warm white 2700K: 2400 lm/m
• Lumens cool white 6200K: 2660 lm/m
• Efficiency warm white 2700K: 120 lm/W
• Efficiency cool white 6200K: 135 lm/W
• Strip LED colour temperature: 2700-6200K
• Power consumption 26 W/m (130W). Real power without CCT controller 52 W/m (260W). Input voltage 48 volt (+0%, -15%)
• Dimmable LED strip with 1280 leds (128+128 leds/m)
• Led strip cuttable every 32 leds (every 12,5cm). Length 5 m, width 12 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR5. A of colour temperature 3000-5000K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-CCT35-256824A-C9 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens warm white 3000K: 2320 lm/m
• Lumens cool white 5100K: 2580 lm/m
• Efficiency warm white 3000K: 120 lm/W
• Efficiency cool white 5100K: 130 lm/W
• Strip LED colour temperature: 3000-5000K
• Power consumption 22 W/m (110W). Real power without CCT controller 44 W/m (220W). Input voltage 48 volt (+0%, -15%)
• Dimmable LED strip with 1280 leds (128+128 leds/m)
• Led strip cuttable every 32 leds (every 12,5cm). Length 5 m, width 12 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 50 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A of colour temperature 3000-5000K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-CCT35-2568U4A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens warm white 3000K: 1800 lm/m
• Lumens cool white 5000K: 2810 lm/m
• Efficiency warm white 3000K: 105 lm/W
• Efficiency cool white 5000K: 135 lm/W
• Strip LED colour temperature: 3000-5000K
• Power consumption 26 W/m (130W). Real power without CCT controller 52 W/m (260W). Input voltage 48 volt (+0%, -15%)
• Dimmable LED strip with 1280 leds (128+128 leds/m)
• Led strip cuttable every 32 leds (every 12,5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

The led strip K52-RGB-112G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 640 lm/m
• Efficiency: 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 560 leds (112 leds/m)
• Led strip cuttable every 7 leds (every 6,25cm). Length 5 m, width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

U52-400W-480OR2-W3 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 350 lm/m
• Efficiency: 65 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 2400 leds (480 leds/m)
• Led strip cuttable every 12 leds (every 2,5cm). Length 5 m, width 5 mm, height 4,5 mm
• Silicon colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 575 lm/m
• Efficiency: 95 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 6,6 W/m (33W), 24V (+0%, -15%)
• Dimmable LED strip with 1600 chips (320 chips/m)
• Led strip cuttable every 16 chips (every 5cm). Upper welding point every 50cm, lower welding point every 5cm.
• Length 5 m, width 7 mm, height 4 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

U52-270W-480OR2-W3 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 285 lm/m
• Efficiency: 50 lm/W
• Strip LED colour temperature: 2700K
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 2400 leds (480 leds/m)
• Led strip cuttable every 12 leds (every 2,5cm). Length 5 m, width 5 mm, height 4,5 mm
• Silicon colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

U52-300W-480OR2-W3 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 270 lm/m
• Efficiency: 50 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 2400 leds (480 leds/m)
• Led strip cuttable every 12 leds (every 2,5cm). Length 5 m, width 5 mm, height 4,5 mm
• Silicon colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

LED strip featuring one warm white circadian violet LED chip and one high CRI cool white LED with light spectrum similar to sun. The colour temperature range is 2700-5000K to ensure the same colour even in different batches of production.

The led strip F52-CCT-2568U4A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens warm white 2700K: 2400 lm/m
• Lumens cool white 5000K: 3000 lm/m
• Efficiency warm white 2700K: 100 lm/W
• Efficiency cool white 5000K: 130 lm/W
• Strip LED colour temperature: 2700-5000K
• Power consumption 26 W/m (130W). Real power without CCT controller 52 W/m (260W). Input voltage 48 volt (+0%, -15%)
• Dimmable LED strip with 1280 leds (128+128 leds/m)
• Led strip cuttable every 32 leds (every 12,5cm). Length 5 m, width 12 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoR400-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2814
• Pixels per meter: 14
• Strip LED colour temperature: RGB+4000K
• Power consumption 21 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 3920 chips (392+392 chips/m)
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoR300-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2814
• Pixels per meter: 14
• Strip LED colour temperature: RGB+3000K
• Power consumption 21 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 3920 chips (392+392 chips/m)
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip L52-RGB-112G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 640 lm/m
• Efficiency: 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 560 leds (112 leds/m)
• Led strip cuttable every 7 leds (every 6,25cm). Length 5 m, width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.