LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoR400-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2814
• Pixels per meter: 14
• Strip LED colour temperature: RGB+4000K
• Power consumption 21 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 3920 chips (392+392 chips/m)
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoR300-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2814
• Pixels per meter: 14
• Strip LED colour temperature: RGB+3000K
• Power consumption 21 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 3920 chips (392+392 chips/m)
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip K52-CoR300-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2814
• Pixels per meter: 14
• Strip LED colour temperature: RGB+3000K
• Power consumption 21 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 3920 chips (392+392 chips/m)
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 12 mm, height 6 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip L52-RGB-112G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 640 lm/m
• Efficiency: 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 560 leds (112 leds/m)
• Led strip cuttable every 7 leds (every 6,25cm). Length 5 m, external width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip F52-RGB-070G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens (white): 500 lm/m
• Efficiency (white): 40 lm/W
• Strip LED colour temperature: RGB
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 350 leds (70 leds/m)
• Led strip cuttable every 7 leds (every 10cm). Length 5 m, external width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011s strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, external width 2 mm, height 7 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Minimum bending diameter: 4 cm
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Strip LED colour temperature: 4000K + RGB
• Lumens white 4000K: 580 lm/m
• Efficiency white 4000K: 105 lm/W
• Dimmable LED strip with 392+392 chips/m.
• Power consumption RGB led + monochrome led 7,7 W/m + 13,3 W/m (210W), 24V (+0%, -15%),
• Led strip cuttable every 56 chips (every 7,14cm). Length 10 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED strip designed to get the best results in terms of lighting, with an efficiency of 125lm/W. For further information please consult LED datasheet.

The led strip F52-40s-x240DH2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1600 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 1200 leds (240 leds/m)
• Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, external width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011-W2. strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, external width 2,6 mm, height 1,5 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Strip LED colour temperature: 4000K + RGB
• Lumens white 4000K: 570 lm/m
• Efficiency white 4000K: 85 lm/W
• Dimmable LED strip with 392+392 chips/m.
• Power consumption RGB led + monochrome led 7,7 W/m + 13,3 W/m (105W), 24V (+0%, -15%),
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Strip LED colour temperature: 3000K + RGB
• Lumens white 3000K: 420 lm/m
• Efficiency white 3000K: 75 lm/W
• Dimmable LED strip with 392+392 chips/m.
• Power consumption RGB led + monochrome led 7,7 W/m + 13,3 W/m (105W), 24V (+0%, -15%),
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip K52-RGB-070G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 500 lm/m
• Efficiency: 40 lm/W
• Strip LED colour temperature: RGB
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 350 leds (70 leds/m)
• Led strip cuttable every 7 leds (every 10cm). Length 5 m, external width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.