Led Strip by Voltage
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 3000K 3step ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F32-30s-060820 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 460 lm/m
- Efficiency: 90 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 5,5 W/m (16,5W), 5V (+0%, -15%)
- Dimmable LED strip with 180 leds (60 leds/m)
- Led strip cuttable every 1 leds (every 1,67cm). Length 3 m, width 5 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
LED strip 50m white led 4000K 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
K502-400-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1585 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 16,5 W/m (825W), 230V (+0%, -15%)
- LED strip with 6000 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 50 m, width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
LED strip 50m warm white led 3000K 2835 120led/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
K502-300-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1540 lm/m
- Efficiency: 105 lm/W
- Strip LED colour temperature: 3000K
- Power consumption 16,5 W/m (825W), 230V (+0%, -15%)
- LED strip with 6000 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 50 m, width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
2700-6200K 2835 CRI>90 256led/m Honglitronic 48V 26W/m 5m CCT 3 cables LED strip with current control
Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR5. A of colour temperature 2700-6200K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F52-CCT-256824A-C90 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens warm white 2700K: 2700 lm/m
- Lumens cool white 6200K: 3010 lm/m
- Efficiency warm white 2700K: 115 lm/W
- Efficiency cool white 6200K: 130 lm/W
- Strip LED colour temperature: 2700-6200K
- Power consumption 26 W/m (130W). Real power without CCT controller 52 W/m (260W). Input voltage 48 volt (+0%, -15%)
- Dimmable LED strip with 1280 leds (128+128 leds/m)
- Led strip cuttable every 32 leds (every 12,5cm). Length 5 m, width 12 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
3000-5000K 2835 CRI>90 256led/m Honglitronic 48V 22W/m 5m CCT 3 cables LED strip with current control
Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR5. A of colour temperature 3000-5000K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F52-CCT35-256824A-C9 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens warm white 3000K: 2320 lm/m
- Lumens cool white 5100K: 2580 lm/m
- Efficiency warm white 3000K: 120 lm/W
- Efficiency cool white 5100K: 130 lm/W
- Strip LED colour temperature: 3000-5000K
- Power consumption 22 W/m (110W). Real power without CCT controller 44 W/m (220W). Input voltage 48 volt (+0%, -15%)
- Dimmable LED strip with 1280 leds (128+128 leds/m)
- Led strip cuttable every 32 leds (every 12,5cm). Length 5 m, width 12 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 50 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
3000-5000K 2835 256led/m 48V 26W/m current control 5m CCT 3 cables LED strip with sunlike light spectrum
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A of colour temperature 3000-5000K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F52-CCT35-2568U4A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens warm white 3000K: 2450 lm/m
- Lumens cool white 5000K: 3000 lm/m
- Efficiency warm white 3000K: 110 lm/W
- Efficiency cool white 5000K: 130 lm/W
- Strip LED colour temperature: 3000-5000K
- Power consumption 26 W/m (130W). Real power without CCT controller 52 W/m (260W). Input voltage 48 volt (+0%, -15%)
- Dimmable LED strip with 1280 leds (128+128 leds/m)
- Led strip cuttable every 32 leds (every 12,5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
LED strip 5m white led 4000K 3step 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
K52-40s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1585 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 16,5 W/m (82,5W), 230V (+0%, -15%)
- LED strip with 600 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 5 m, width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
K52-30s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1535 lm/m
- Efficiency: 105 lm/W
- Strip LED colour temperature: 3000K
- Power consumption 16,5 W/m (82,5W), 230V (+0%, -15%)
- LED strip with 600 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 5 m, width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
COB LED strip 25m white 4000K 296leds/m 230V 11W/m, IP65 (extruded silicone tube with full edges and empty interior)
K252-400-296ORH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 990 lm/m
- Efficiency: 95 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 11 W/m (275W), 230V (+0%, -15%)
- Dimmable LED strip with 7400 chips (296 chips/m)
- Led strip cuttable every 37 chips (every 12,5cm). Length 25 m, width 10 mm, height 4,5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
COB LED strip 25m warm white 3000K 296leds/m 230V 11W/m, IP65 (extruded silicone tube with full edges and empty interior)
K252-300-296ORH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 935 lm/m
- Efficiency: 90 lm/W
- Strip LED colour temperature: 3000K
- Power consumption 11 W/m (275W), 230V (+0%, -15%)
- Dimmable LED strip with 7400 chips (296 chips/m)
- Led strip cuttable every 37 chips (every 12,5cm). Length 25 m, width 10 mm, height 4,5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 6000-6500K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F32-600-060820 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 475 lm/m
- Efficiency: 95 lm/W
- Strip LED colour temperature: 6000-6500K
- Power consumption 5,5 W/m (16,5W), 5V (+0%, -15%)
- Dimmable LED strip with 180 leds (60 leds/m)
- Led strip cuttable every 1 leds (every 1,67cm). Length 3 m, width 5 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
2700-5000K 2835 256led/m 48V 26W/m current control 5m CCT 3 cables LED strip with sunlike light spectrum
LED strip featuring one warm white circadian violet LED chip and one high CRI cool white LED with light spectrum similar to sun. The colour temperature range is 2700-5000K to ensure the same colour even in different batches of production.
The led strip F52-CCT-2568U4A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens warm white 2700K: 2400 lm/m
- Lumens cool white 5000K: 3000 lm/m
- Efficiency warm white 2700K: 100 lm/W
- Efficiency cool white 5000K: 130 lm/W
- Strip LED colour temperature: 2700-5000K
- Power consumption 26 W/m (130W). Real power without CCT controller 52 W/m (260W). Input voltage 48 volt (+0%, -15%)
- Dimmable LED strip with 1280 leds (128+128 leds/m)
- Led strip cuttable every 32 leds (every 12,5cm). Length 5 m, width 12 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
- Working temperature: -10°C ~ +45°C
Led Strip by Voltage
I più venduti
The led strip F52-30s-x240DF2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2000 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
