Led Strip by Voltage
The led strip Fx2-30s-1208F2/14-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1510 lm/m
- Efficiency: 115 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (360W), 24V (+0%, -15%)
- Dimmable LED strip with 3000 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 25 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip FE2-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1450 lm/m (estimated value)
- Efficiency: 115 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (720W), 24V (+0%, -15%)
- Dimmable LED strip with 6000 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 50 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
COB LED strip 50m warm white 3000K 296leds/m 230V 11W/m, IP65 (extruded silicone tube with full edges and empty interior)
K502-300-296ORH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 935 lm/m (estimated value)
- Efficiency: 70 lm/W
- Strip LED colour temperature: 3000K
- Power consumption 11 W/m (550W), 230V (+0%, -15%)
- Dimmable LED strip with 14800 chips (296 chips/m)
- Led strip cuttable every 37 chips (every 12,5cm). Length 50 m, width 10 mm, height 4,5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
Zig-Zag LED strips are flexible light strips designed with a wavy or zig-zag pattern, which allows them to be bent not only lengthwises, like traditional strips, but also horizontally and around curves.
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.
The led strip F52-40s-060821Z is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 900 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 8 W/m (40W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 chips (every 5cm). Length 5 m, width 6 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
The led strip F52-35s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1600 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 3500K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
COB LED strip 50m white 4000K 296leds/m 230V 11W/m, IP65 (extruded silicone tube with full edges and empty interior)
K502-400-296ORH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 990 lm/m (estimated value)
- Efficiency: 70 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 11 W/m (550W), 230V (+0%, -15%)
- Dimmable LED strip with 14800 chips (296 chips/m)
- Led strip cuttable every 37 chips (every 12,5cm). Length 50 m, width 10 mm, height 4,5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The led strip Fx2-40s-1208F2/14-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1620 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 14,4 W/m (360W), 24V (+0%, -15%)
- Dimmable LED strip with 3000 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 25 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-40s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1620 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-290-240DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2010 lm/m
- Efficiency: 115 lm/W
- Strip LED colour temperature: 2900-3100K
- Power consumption 19,2 W/m (96W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 6 leds (every 2,5cm). Length 5 m, width 10 mm, height 2,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
This led strip is flexible with an adhesive on its back side for quick installation even on curved surfaces. Not suitable for painted surfaces
Tech specs:
- Lumens: 480 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000-4500K
- Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9080HL
- Working temperature: -10°C ~ +45°C
The led strip F52-40s-0608F1 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1450 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Led Strip by Voltage
I più venduti
The led strip F52-30s-x240DF2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2000 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
