The led strip F52-40s-x240DF2/20 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2770 lm/m
• Efficiency: 155 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 20 W/m (100W), 24V (+0%, -15%)
• Dimmable LED strip with 1200 leds (240 leds/m)
• Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

K52-40s-0608F1 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 2835 LED
• Lumens: 1300 lm/m (estimated value)
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K 3step
• Led colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

Zig-Zag LED strips are flexible light strips designed with a wavy or zig-zag pattern, which allows them to be bent not only lengthwises, like traditional strips, but also horizontally and around curves.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-40s-060821Z is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 900 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 8 W/m (40W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 chips (every 5cm). Length 5 m, width 6 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

The led strip K52-600-140822-W6 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1500 lm/m
• Efficiency: 130 lm/W
• Strip LED colour temperature: 6000K 3step
• Power consumption 11 W/m (55W), 24V (+0%, -15%)
• Dimmable LED strip with 700 leds (140 leds/m)
• Led strip cuttable every 7 leds (every 5cm). Length 5 m, width 8 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

The led strip F52-RGB-120G12-W6 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens (white): 390 lm/m
• Efficiency (white): 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 6 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F12-CoRGB-144510 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2812
• Pixels per meter: 144
• Strip LED colour temperature: RGB
• Power consumption 34,6 W/m (34,6W), 5V (+0%, -15%)
• Dimmable LED strip with 144 leds (144 leds/m)
• Led strip cuttable every 1 leds (every 0,69cm). Length 1 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 4000K 3step ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-40s-256824A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 3450 lm/m
• Efficiency: 175 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 22 W/m (110W), 48V (+0%, -15%)
• Dimmable LED strip with 1280 leds (256 leds/m)
• Led strip cuttable every 16 leds (every 6,25cm). Length 5 m, width 12 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-30s-120821-W3 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 600 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 3 leds (every 2,5cm). Length 5 m, width 3 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

The led strip F52-BLU-120811-W5 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 200 lm/m (estimated value)
• Efficiency: 20 lm/W
• Strip LED colour temperature: 460-465nm
• Power consumption 10 W/m (50W), 12V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 3 leds (every 2,5cm). Length 5 m, width 5 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LA2-450W-264N12 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1240 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4500K
• Power consumption 12 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 2640 leds (264 leds/m)
• Led strip cuttable every 8 leds (every 3,03cm). Length 10 m, width 10 mm, height 5 mm
• Silicon colour: White
• Double sided adhesive tape type: Nano Double-Sided Tape
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

LA2-320W-264N12 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1240 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 3200K
• Power consumption 12 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 2640 leds (264 leds/m)
• Led strip cuttable every 8 leds (every 3,03cm). Length 10 m, width 10 mm, height 5 mm
• Silicon colour: White
• Double sided adhesive tape type: Nano Double-Sided Tape
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

LA2-870W-264N12 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1230 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 8700K
• Power consumption 12 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 2640 leds (264 leds/m)
• Led strip cuttable every 8 leds (every 3,03cm). Length 10 m, width 10 mm, height 5 mm
• Silicon colour: White
• Double sided adhesive tape type: Nano Double-Sided Tape
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.