Our range of LED Strips includes many models suitable for different uses. LED strips are divided into categories to help you in finding the product that best fits your needs and projects.
In this section, led strips are classified according to Light colour.
Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR3. A very narrow range of colour temperature 4000-4250K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F52-400-120822A/13.3 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
2835 LED
Lumens: 1510 lm/m
Efficiency: 125 lm/W
Strip LED colour temperature: 4000-4250K
Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
Dimmable LED strip with 600 leds (120 leds/m)
Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
PCB colour: White
Double sided adhesive tape type: 3M 9495LE
10 cm power input cables on both sides of the strip
Working temperature: -10°C ~ +50°C
IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
The led strip L52-400T-060822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
2835 LED
Lumens: 1200 lm/m
Efficiency: 90 lm/W
Strip LED colour temperature: 4000K
Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
Dimmable LED strip with 300 leds (60 leds/m)
Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 12 mm, height 4,5 mm
Water protection: IP67
Silicon colour: Transparent
Double sided adhesive tape type: 3M 5604A VHB
Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
K52-40s-120DF1 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
2835 LED
Lumens: 950 lm/m (estimated value)
Efficiency: 110 lm/W
Strip LED colour temperature: 4000K 3step
Led colour temperature: 4000K 3step
Power consumption 9,6 W/m (48W), 12V (+0%, -15%)
Dimmable LED strip with 600 leds (120 leds/m)
Led strip cuttable every 3 leds (every 2,5cm). Length 5 m, width 10 mm, height 4 mm
Water protection: IP65
PCB colour: White
Double sided adhesive tape type: 3M 9495LE
10 cm power input cables on both sides of the strip
Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.