Our range of LED Strips includes many models suitable for different uses. LED strips are divided into categories to help you in finding the product that best fits your needs and projects.
In this section, led strips are classified according to Light colour.
K52-40s-1208F2/14.4 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
2835 LED
Lumens: 710 lm/m
Efficiency: 110 lm/W
Strip LED colour temperature: 4000K 3step
Led colour temperature: 4000K 3step
Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
Dimmable LED strip with 600 leds (120 leds/m)
Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
Water protection: IP65
PCB colour: White
Double sided adhesive tape type: 3M 9495LE
10 cm power input cables on both sides of the strip
Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.
K52-40s-120DF2 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
2835 LED
Lumens: 950 lm/m
Efficiency: 110 lm/W
Strip LED colour temperature: 4000K 3step
Led colour temperature: 4000K 3step
Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
Dimmable LED strip with 600 leds (120 leds/m)
Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 4 mm
Water protection: IP65
PCB colour: White
Double sided adhesive tape type: 3M 9495LE
10 cm power input cables on both sides of the strip
Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.
B52-40s-120822/14.4 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. It is covered by water-resistant Parylene protective film (10um on IP65 version and 25um on IP67 version). ATTENTION: the parylene strips cannot be exposed to direct sunlight. The ultraviolet rays rapidly damage the protection.
Tech specs:
2835 LED
Lumens: 1590 lm/m
Efficiency: 125 lm/W
Strip LED colour temperature: 4000K 3step
Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
Dimmable LED strip with 600 leds (120 leds/m)
Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
Water protection: IP65
PCB colour: White
Double sided adhesive tape type: 3M 9495LE
10 cm power input cables on both sides of the strip
Working temperature: -10°C ~ +50°C
IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 4000K 3step ensures colour stability even for different lots. For further information please consult LED datasheet.
B52-40s-120822 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. It is covered by water-resistant Parylene protective film (10um on IP65 version and 25um on IP67 version). ATTENTION: the parylene strips cannot be exposed to direct sunlight. The ultraviolet rays rapidly damage the protection.
Tech specs:
2835 LED
Lumens: 2600 lm/m
Efficiency: 120 lm/W
Strip LED colour temperature: 4000K 3step
Power consumption 24 W/m (120W), 24V (+0%, -15%)
Dimmable LED strip with 600 leds (120 leds/m)
Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
Water protection: IP65
PCB colour: White
Double sided adhesive tape type: 3M 9495LE
10 cm power input cables on both sides of the strip
Working temperature: -10°C ~ +50°C
IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.
The led strip F52-40s-128824A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
2835 LED
Lumens: 2200 lm/m
Efficiency: 170 lm/W
Strip LED colour temperature: 4000K 3step
Power consumption 14,4 W/m (72W), 48V (+0%, -15%)
Dimmable LED strip with 640 leds (128 leds/m)
Led strip cuttable every 16 leds (every 12,5cm). Length 5 m, width 10 mm, height 1,5 mm
PCB colour: White
Double sided adhesive tape type: 3M 9495LE
10 cm power input cables on both sides of the strip
Working temperature: -20°C ~ +50°C
IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.