LED strip featuring one warm white circadian violet LED chip and one high CRI cool white LED with light spectrum similar to sun. The colour temperature range is 2700-5000K to ensure the same colour even in different batches of production.

The led strip F52-CCT-2568U4A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens warm white 2700K: 2400 lm/m
• Lumens cool white 5000K: 3000 lm/m
• Efficiency warm white 2700K: 100 lm/W
• Efficiency cool white 5000K: 130 lm/W
• Strip LED colour temperature: 2700-5000K
• Power consumption 26 W/m (130W). Real power without CCT controller 52 W/m (260W). Input voltage 48 volt (+0%, -15%)
• Dimmable LED strip with 1280 leds (128+128 leds/m)
• Led strip cuttable every 32 leds (every 12,5cm). Length 5 m, width 12 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
• Working temperature: -10°C ~ +45°C

The led strip K52-RGB-070G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 500 lm/m
• Efficiency: 40 lm/W
• Strip LED colour temperature: RGB
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 350 leds (70 leds/m)
• Led strip cuttable every 7 leds (every 10cm). Length 5 m, width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip F52-IR850-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Wavelength 850nm
• Power consumption 24 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

The led strip F52-IR940-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Wavelength 940nm
• Power consumption 24 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-40s-128824A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2200 lm/m
• Efficiency: 170 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 48V (+0%, -15%)
• Dimmable LED strip with 640 leds (128 leds/m)
• Led strip cuttable every 16 leds (every 12,5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -20°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

LED strip designed to get the best results in terms of lighting, with an efficiency of 125lm/W. For further information please consult LED datasheet.

The led strip F52-40s-x240DH2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1600 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 1200 leds (240 leds/m)
• Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED strip designed to get the best results in terms of lighting, with an efficiency of 130lm/W. For further information please consult LED datasheet.

The led strip F52-40s-x240DH2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2080 lm/m
• Efficiency: 130 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 19,2 W/m (96W), 24V (+0%, -15%)
• Dimmable LED strip with 1200 leds (240 leds/m)
• Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-600-204422 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3014 LED
• Lumens: 2000 lm/m
• Efficiency: 115 lm/W
• Strip LED colour temperature: 6000-6500K
• Power consumption 19,2 W/m (96W), 24V (+0%, -15%)
• Dimmable LED strip with 1020 leds (204 leds/m)
• Led strip cuttable every 6 leds (every 2,94cm). Length 5 m, width 10 mm, height 1,5 mm
• Water protection: IP20
• Double sided adhesive tape type: 3M 9495LE
• PCB colour: White
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip L52-RGB-070G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 500 lm/m
• Efficiency: 40 lm/W
• Strip LED colour temperature: RGB
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 350 leds (70 leds/m)
• Led strip cuttable every 7 leds (every 10cm). Length 5 m, width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 1590 lm/m
• Efficiency: 115 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 15,5 W/m (155W), 24V (+0%, -15%)
• Dimmable LED strip with 5280 chips (528 chips/m)
• Led strip cuttable every 24 chips (every 4,55cm). Length 10 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 1690 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 6000K
• Power consumption 15,5 W/m (155W), 24V (+0%, -15%)
• Dimmable LED strip with 5280 chips (528 chips/m)
• Led strip cuttable every 24 chips (every 4,55cm). Length 10 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-IR940-060812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Wavelength 940nm
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C