LED Strip made of 2835 LED chips that incorporate a controller 1903 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoCCT-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Control chip: 1903
• Pixels per meter: 20
• Strip LED colour temperature: 3000-6500K
• Power consumption 7,5 W/m (37,5W). Real power without CCT controller 15 W/m (75W). Input voltage 24 volt (+0%, -15%)
• Dimmable LED strip with 600 chips (120 chips/m)
• Led strip cuttable every 6 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RGBCCT-210H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838+2835+2835 LED
• Lumens warm white 2700K: 1560 lm/m
• Lumens cool white 6600K: 1700 lm/m
• Efficiency warm white 2700K: 120 lm/W
• Efficiency cool white 6600K: 130 lm/W
• Strip LED colour temperature: RGBCCT
• Power consumption 14,4 W/m + 14,4 W/m + 14,4 W/m (216W), 24V (+0%, -15%)
• Dimmable LED strip with 1050 leds (70+70+70 leds/m)
• Led strip cuttable every 21 leds (every 10cm). Length 5 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

The led strip K52-RGBCCT-210H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838+2835+2835 LED
• Lumens warm white 2700K: 1400 lm/m
• Lumens cool white 6600K: 1525 lm/m
• Efficiency warm white 2700K: 105 lm/W
• Efficiency cool white 6600K: 115 lm/W
• Strip LED colour temperature: RGBCCT
• Power consumption 14,4 W/m + 14,4 W/m + 14,4 W/m (216W), 24V (+0%, -15%)
• Dimmable LED strip with 1050 leds (70+70+70 leds/m)
• Led strip cuttable every 21 leds (every 10cm). Length 5 m, width 14 mm, height 5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

LED strip designed to get the best results in terms of lighting, with an efficiency of 145lm/W. For further information please consult LED datasheet.

The led strip F52-30s-160822A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 3200 lm/m
• Efficiency: 145 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 24 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 800 leds (160 leds/m)
• Led strip cuttable every 8 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 590 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 7 W/m (35W), 12V (+0%, -15%)
• Dimmable LED strip with 1920 chips (384 chips/m)
• Led strip cuttable every 8 chips (every 2,083cm). Length 5 m, width 3 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 570 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 7 W/m (35W), 24V (+0%, -15%)
• Dimmable LED strip with 1920 chips (384 chips/m)
• Led strip cuttable every 16 chips (every 4,17cm). Length 5 m, width 3 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 790 lm/m
• Efficiency: 80 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 11 W/m (55W), 24V (+0%, -15%)
• Dimmable LED strip with 2000 chips (400 chips/m)
• Led strip cuttable every 8 chips (every 2cm). Length 5 m, width 7 mm, height 3 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 3910 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 40 W/m (200W), 24V (+0%, -15%)
• Dimmable LED strip with 8000 chips (1600 chips/m)
• Led strip cuttable every 40 chips (every 2,5cm). Length 5 m, width 30 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 830 lm/m
• Efficiency: 80 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 10 W/m (50W), 12V (+0%, -15%)
• Dimmable LED strip with 2430 chips (486 chips/m)
• Led strip cuttable every 8 chips (every 2cm). Upper welding point every 50cm, lower welding point every 2cm.
• Length 5 m, width 7 mm, height 4 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

U52-270W-480OR2-W3 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 285 lm/m
• Efficiency: 50 lm/W
• Strip LED colour temperature: 2700K
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 2400 leds (480 leds/m)
• Led strip cuttable every 12 leds (every 2,5cm). Length 5 m, width 5 mm, height 4,5 mm
• Silicon colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

U52-300W-480OR2-W3 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 270 lm/m
• Efficiency: 50 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 2400 leds (480 leds/m)
• Led strip cuttable every 12 leds (every 2,5cm). Length 5 m, width 5 mm, height 4,5 mm
• Silicon colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F32-30s-576822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 6200 lm/m
• Efficiency: 155 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 44,4 W/m (133,2W), 24V (+0%, -15%)
• Dimmable LED strip with 1728 leds (576 leds/m)
• Led strip cuttable every 16 leds (every 2,78cm). Length 3 m, width 30 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.