Led Strip by Power
Led Strip by Power
Our range of LED Strips includes many models suitable for different uses. LED strips are divided into categories to help you in finding the product that best fits your needs and projects.
In this section, led strips are classified according to Power.
LED strip 5m warm white 3000K 3step Honglitronic 240leds/m 2835 Parylene IP65 24V 14.4W/m
B52-30s-240D22/14.4 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. It is covered by water-resistant Parylene protective film (10um on IP65 version and 25um on IP67 version). ATTENTION: the parylene strips cannot be exposed to direct sunlight. The ultraviolet rays rapidly damage the protection.
Tech specs:
- 2835 LED
- Lumens: 1555 lm/m
- Efficiency: 120 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 6 leds (every 2,5cm). Length 5 m, external width 10 mm, height 1,5 mm
- Water protection: IP65
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
The led strip F52-FFOO-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1320 lm/m
- Efficiency: 70 lm/W
- Strip LED colour temperature: 3000-3500K
- Power consumption 24 W/m (120W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip 10m white led 4000K 3step 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
KA2-40s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1585 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 16,5 W/m (165W), 230V (+0%, -15%)
- LED strip with 1200 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 10 m, external width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
KA2-30s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1535 lm/m
- Efficiency: 105 lm/W
- Strip LED colour temperature: 3000K
- Power consumption 16,5 W/m (165W), 230V (+0%, -15%)
- LED strip with 1200 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 10 m, external width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
The led strip Fx2-30s-1208F2-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2345 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 24 W/m (600W), 24V (+0%, -15%)
- Dimmable LED strip with 3000 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 25 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip Fx2-30s-x240DF2-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2850 lm/m
- Efficiency: 160 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 20 W/m (500W), 24V (+0%, -15%)
- Dimmable LED strip with 6000 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 25 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip 25m white led 4000K 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
K252-400-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1585 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 16,5 W/m (412,5W), 230V (+0%, -15%)
- LED strip with 3000 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 25 m, external width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
LED strip 25m warm white led 3000K 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
K252-300-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1540 lm/m
- Efficiency: 105 lm/W
- Strip LED colour temperature: 3000K
- Power consumption 16,5 W/m (412,5W), 230V (+0%, -15%)
- LED strip with 3000 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 25 m, external width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
The led strip FE2-30s-1208F2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2345 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 24 W/m (1200W), 24V (+0%, -15%)
- Dimmable LED strip with 6000 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 50 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip 50m white led 4000K 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
K502-400-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1585 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 16,5 W/m (825W), 230V (+0%, -15%)
- LED strip with 6000 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 50 m, external width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
LED strip 50m warm white led 3000K 2835 120led/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
K502-300-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1540 lm/m
- Efficiency: 105 lm/W
- Strip LED colour temperature: 3000K
- Power consumption 16,5 W/m (825W), 230V (+0%, -15%)
- LED strip with 6000 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 50 m, external width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
The led strip F52-400-240CA2-W3 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2216 LED
- Lumens: 510 lm/m
- Efficiency: 105 lm/W
- Strip LED colour temperature: 3900-4250K
- Power consumption 5,5 W/m (27,5W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 6 leds (every 2,5cm). Length 5 m, external width 3 mm, height 1 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Led Strip by Power
I più venduti
The led strip F52-30s-x240DF2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2000 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
