Led Strips
Led Strips
Our range of LED Strips includes many models suitable for different uses. LED strips are divided into categories to help you in finding the product that best fits your needs and projects.
Our catalogue also includes products such as Power Supplies, Aluminum Profiles and LED bars.
If you need more technical information about PCB type and IP protections, click on the following buttons:
LED strip 10m white led 4000K 3step 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
KA2-40s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1585 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 16,5 W/m (165W), 230V (+0%, -15%)
- LED strip with 1200 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 10 m, width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
LED Strip made of 5050 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.
LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.
The led strip F12-CoRGB-144510 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 5050 LED
- Control chip: WS2812
- Pixels per meter: 144
- Strip LED colour temperature: RGB
- Power consumption 34,6 W/m (34,6W), 5V (+0%, -15%)
- Dimmable LED strip with 144 leds (144 leds/m)
- Led strip cuttable every 1 leds (every 0,69cm). Length 1 m, width 12 mm, height 2,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip Fx2-40s-1208F2/14-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1620 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 14,4 W/m (360W), 24V (+0%, -15%)
- Dimmable LED strip with 3000 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 25 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip 25m white led 4000K 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
K252-400-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1585 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 16,5 W/m (412,5W), 230V (+0%, -15%)
- LED strip with 3000 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 25 m, width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
LED strip 25m RGB 72led/m 2835 230V 11W/m, IP65 extruded silicone tube with full edges (empty inside)
The led strip K252-RGB-0968ZH is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 235 lm/m
- Efficiency: 25 lm/W
- Strip LED colour temperature: RGB
- Power consumption 11 W/m (275W), 230V (+0%, -15%)
- LED strip with 2400 led (96 led/m)
- Led strip cuttable every 48 leds (every 50cm). Length 25 m, width 12 mm, height 5 mm
- PCB colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.
The led strip F32-30s-576822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 6200 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 44,4 W/m (133,2W), 24V (+0%, -15%)
- Dimmable LED strip with 1728 leds (576 leds/m)
- Led strip cuttable every 16 leds (every 2,78cm). Length 3 m, width 30 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
LED strip 50m white led 4000K 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
K502-400-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1585 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 16,5 W/m (825W), 230V (+0%, -15%)
- LED strip with 6000 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 50 m, width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
The led strip F52-IR730-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Wavelength 730nm
- Power consumption 24 W/m (120W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
The led strip F52-IR730-060812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Wavelength 730nm
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 2,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
The led strip F52-IR850-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Wavelength 850nm
- Power consumption 24 W/m (120W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
The led strip F52-IR850-060812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Wavelength 850nm
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 2,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
The led strip F52-IR940-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- Wavelength 940nm
- Power consumption 24 W/m (120W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
Led Strips
I più venduti
The led strip F52-30s-x240DF2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2000 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
