Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 780 lm/m
• Efficiency: 95 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 9 W/m (45W), 48V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 24 chips (every 5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 1975 lm/m
• Efficiency: 135 lm/W
• Strip LED colour temperature: 2700K
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 24 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 2015 lm/m
• Efficiency: 140 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 24 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 3910 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 40 W/m (200W), 24V (+0%, -15%)
• Dimmable LED strip with 8000 chips (1600 chips/m)
• Led strip cuttable every 40 chips (every 2,5cm). Length 5 m, width 30 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
The key feature of Free-Cut LED strips is their ability to be cut at very short intervals, allowing for customized and flexible installation for any design and space requirements. Ideal for applications where a linear and uniform light is needed.

Tech specs:

• Lumens: 880 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 11 W/m (55W), 24V (+0%, -15%)
• Dimmable LED strip with 2000 chips (400 chips/m)
• Led strip cuttable every 4 chips (every 1cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 700 lm/m
• Efficiency: 85 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 9 W/m (45W), 48V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 24 chips (every 5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 75 lm/m
• Efficiency: 10 lm/W
• Strip LED colour temperature: Red
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 1600 chips (320 chips/m)
• Led strip cuttable every 16 chips (every 5cm). Length 5 m, width 5 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The innovation of LED technology has allowed to produce diodes emitting a light that imitates natural light. This leads to a reduction in the emission of blue light that is common in traditional LEDs and, as a consequence, to lighting solutions that enhance our wellbeing. The light emitted by these LEDs reduces eye fatigue, supports a favorable circadian rhythm and improves the sharpness of the colors.

Tech specs:

• 2835 LED
• Lumens: 1550 lm/m
• Efficiency: 100 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 17 W/m (85W), 24V (±1%),
• Dimmable LED strip with 640 leds (128 leds/m)
• Led strip cuttable every 8 leds (every 6,25cm). Length 5 m, width 8 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED strip designed for horticulture. Due to its own spectrum of wave length this strip is suitable for stimulating the planth growth in indoor crops and hydroponic cultivation. It is not recommended to operate the 3 channels at full power unless a suitable aluminium profile is used, i.e. with a sufficiently large surface area to adequately dissipate heat. Failure to do so could result in a sharp decrease in the life of the LED in terms of hours. The led strip B52-30RB-2048O2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Led/cut point: 1) Red+Blue+Warm white: 34 2) Red: 10 3) Blue: 8 4) Warm white: 16
• LED colour temperature: 1) Red: 640nm 2) Blue: 450nm 3) Warm white: 3000K
• Dimmable LED strip with 1020 leds (204 leds/m)
• Input voltage: 24V (+0%, -15%)
• Power consumption: 1) Red+Blue+Warm white: 28,8W 2) Red: 7,2W 3) Blue: 7,2W 4) Warm white: 14,4W
• Led strip cuttable every 34 leds (every 16,67cm). Length 5 m, width 12 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• Photosynthetic Photon Flux (PPF): 1) Red+Blue+Warm white: 52,5 umol/s 2) Red: 12,4 umol/s 3) Blue: 14,2 umol/s 4) Warm white: 29,1 umol/s
• PRF: 1) Red+Blue+Warm white: 9,7 mW 2) Red: 2,1 mW 3) Blue: 2,8 mW 4) Warm white: 5,4 mW
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-30s-252822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 5100 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 45 W/m (225W), 24V (+0%, -15%)
• Dimmable LED strip with 1260 leds (252 leds/m)
• Led strip cuttable every 14 leds (every 5,55cm). Length 5 m, width 20 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Zig-Zag LED strips are flexible light strips designed with a wavy or zig-zag pattern, which allows them to be bent not only lengthwises, like traditional strips, but also horizontally and around curves.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-30s-096822Z is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1060 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 10 W/m (50W), 24V (+0%, -15%)
• Dimmable LED strip with 480 leds (96 leds/m)
• Led strip cuttable every 6 chips (every 6,25cm). Length 5 m, width 6 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Zig-Zag LED strips are flexible light strips designed with a wavy or zig-zag pattern, which allows them to be bent not only lengthwises, like traditional strips, but also horizontally and around curves.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-40s-096822Z is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1110 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 10 W/m (50W), 24V (+0%, -15%)
• Dimmable LED strip with 480 leds (96 leds/m)
• Led strip cuttable every 6 chips (every 6,25cm). Length 5 m, width 6 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.