LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoR300-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2814
• Pixels per meter: 14
• Strip LED colour temperature: RGB+3000K
• Power consumption 21 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 3920 chips (392+392 chips/m)
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip K52-CoR300-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2814
• Pixels per meter: 14
• Strip LED colour temperature: RGB+3000K
• Power consumption 21 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 3920 chips (392+392 chips/m)
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 12 mm, height 6 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Strip LED colour temperature: 4000K + RGB
• Lumens white 4000K: 570 lm/m
• Efficiency white 4000K: 85 lm/W
• Dimmable LED strip with 392+392 chips/m.
• Power consumption RGB led + monochrome led 7,7 W/m + 13,3 W/m (105W), 24V (+0%, -15%),
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Strip LED colour temperature: 3000K + RGB
• Lumens white 3000K: 420 lm/m
• Efficiency white 3000K: 75 lm/W
• Dimmable LED strip with 392+392 chips/m.
• Power consumption RGB led + monochrome led 7,7 W/m + 13,3 W/m (105W), 24V (+0%, -15%),
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The L52-R400T-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip.

The led strip L52-R400T-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 4000K + RGB
• Lumens white 4000K: 1875 lm/m
• Efficiency white 4000K: 140 lm/W
• Dimmable LED strip with 70+70 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
• Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 14 mm, height 5,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The F52-R40s-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R40s-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 4000K 3step + RGB
• Lumens white 4000K: 1875 lm/m
• Efficiency white 4000K: 140 lm/W
• Dimmable LED strip with 70+70 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
• Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

The K52-R40s-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip.

The led strip K52-R40s-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 4000K 3step + RGB
• Lumens white 4000K: 1875 lm/m
• Efficiency white 4000K: 140 lm/W
• Dimmable LED strip with 70+70 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
• Led strip cutting points every 14 leds (every 16,5cm). Length 5000 m, width 14 mm, height 5,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The F52-R600-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R600-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 6000K 3step + RGB
• Lumens white 6000K: 1735 lm/m
• Efficiency white 6000K: 130 lm/W
• Dimmable LED strip with 70+70 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
• Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

The led strip F52-RGB-120112-W10 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3535 LED
• Lumens (white): 800 lm/m
• Efficiency (white): 35 lm/W
• Strip LED colour temperature: RGB
• Power consumption 23 W/m (115W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 10 mm, height 3,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip FA2-RGB-840OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens (white): 450 lm/m
• Efficiency (white): 30 lm/W
• Strip LED colour temperature: RGB
• Power consumption 15 W/m (150W), 24V (+0%, -15%)
• Dimmable LED strip with 8400 chips (840 chips/m)
• Led strip cuttable every 42 chips (every 5cm). Length 10 m, width 10 mm, height 3 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RGBCCT-840OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens warm white 2700K: 415 lm/m
• Lumens cool white 6500K: 410 lm/m
• Efficiency warm white 2700K: 80 lm/W
• Efficiency cool white 6500K: 80 lm/W
• Strip LED colour temperature: RGB + 2700-6500°K
• Power consumption 12 W/m + 5 W/m + 5 W/m (110W), 24V (+0%, -15%)
• Dimmable LED strip with 4200 leds (280+280+280 leds/m)
• Led strip cuttable every 30 leds (every 3,55cm). Length 5 m, external width 12 mm, height 3 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RGB-1080OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens (white): 400 lm/m
• Efficiency (white): 30 lm/W
• Strip LED colour temperature: RGB
• Power consumption 14 W/m (70W), 24V (+0%, -15%)
• Dimmable LED strip with 5400 chips (1080 chips/m)
• Led strip cuttable every 54 chips (every 5cm). Length 5 m, width 12 mm, height 3 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C