Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR3. A very narrow range of colour temperature 2900-3000K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-290-140822A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2230 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 2900-3000K
• Power consumption 24 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 700 leds (140 leds/m)
• We recommend to install a high frequency dimmer to avoid buzzing
• Led strip cuttable every 7 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 3000K 3step ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-30s-036822A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 850 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 8,6 W/m (43W), 24V (+0%, -15%)
• Dimmable LED strip with 180 leds (36 leds/m)
• Led strip cuttable every 6 leds (every 16,67cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR5. A very narrow range of colour temperature 2900-3000K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-290-060822BH5 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1180 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 2900-3000K
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR5. A very narrow range of colour temperature 2940-3100K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-300-060822BH5 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1180 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 2940-3100K
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

The led strip F52-300-140422 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3014 LED
• Lumens: 1560 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 2900-3100K
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 700 leds (140 leds/m)
• Led strip cuttable every 7 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• Water protection: IP20
• Double sided adhesive tape type: 3M 9495LE
• PCB colour: White
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-300-204422 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3014 LED
• Lumens: 2050 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 3000-3100K
• Power consumption 19,2 W/m (96W), 24V (+0%, -15%)
• Dimmable LED strip with 1020 leds (204 leds/m)
• Led strip cuttable every 6 leds (every 2,94cm). Length 5 m, width 10 mm, height 1,5 mm
• Water protection: IP20
• Double sided adhesive tape type: 3M 9495LE
• PCB colour: White
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip L52-300T-120D22 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 725 lm/m
• Efficiency: 85 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 4,5 mm
• Water protection: IP67
• Silicon colour: Transparente
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip L52-300T-060D22 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 400 lm/m
• Efficiency: 85 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 4,8 W/m (24W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 4,5 mm
• Water protection: IP67
• Silicon colour: Transparente
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

M52-300-240D22 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1550 lm/m
• Efficiency: 85 lm/W
• Strip LED colour temperature: 3000K
• Led colour temperature: 3000K
• Power consumption 19,2 W/m (96W), 24V (+0%, -15%)
• Dimmable LED strip with 1200 leds (240 leds/m)
• Led strip cuttable every 6 leds (every 2,5cm). Length 5 m, width 10 mm, height 2,5 mm
• Water protection: IP53 (known as IP65 in the commercial field)
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

K52-30s-1208F2/14.4 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 2835 LED
• Lumens: 680 lm/m
• Efficiency: 105 lm/W
• Strip LED colour temperature: 3000K 3step
• Led colour temperature: 3000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

The led strip Fx2-30s-120DF2-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 950 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 9,6 W/m (240W), 24V (+0%, -15%)
• Dimmable LED strip with 3000 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 25 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip FE2-30s-120DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 950 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 9,6 W/m (480W), 24V (+0%, -15%)
• Dimmable LED strip with 6000 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 50 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C