The led strip F52-40s-0608H2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1270 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-GRE-60341 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3528 LED
• Strip LED colour temperature: 520-525nm
• Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-BLU-60711 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 335 LED
• Lumens: 300 lm/m (estimated value)
• Efficiency: 65 lm/W
• Strip LED colour temperature: Blue
• Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 8 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 4000K 3step ensures colour stability even for different lots. For further information please consult LED datasheet.

B52-40s-060822 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. It is covered by water-resistant Parylene protective film (10um on IP65 version and 25um on IP67 version). ATTENTION: the parylene strips cannot be exposed to direct sunlight. The ultraviolet rays rapidly damage the protection.

Tech specs:

• 2835 LED
• Lumens: 1380 lm/m
• Efficiency: 105 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

LED strips with 5050 SMD for temporary installations, DIY works or projects where high performance is not required. The led strip HOBBY-F5-300-6051 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Lumens: 1000 lm/m (estimated value)
• Efficiency: 75 lm/W
• Strip LED colour temperature: 2800-3200K
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9080HL
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-400-140422 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3014 LED
• Lumens: 1670 lm/m
• Efficiency: 130 lm/W
• Strip LED colour temperature: 4000-4250K
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 700 leds (140 leds/m)
• Led strip cuttable every 7 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• Water protection: IP20
• Double sided adhesive tape type: 3M 9495LE
• PCB colour: White
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-400-204422 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3014 LED
• Lumens: 2200 lm/m
• Efficiency: 130 lm/W
• Strip LED colour temperature: 4000-4250K
• Power consumption 19,2 W/m (96W), 24V (+0%, -15%)
• Dimmable LED strip with 1020 leds (204 leds/m)
• Led strip cuttable every 6 leds (every 2,94cm). Length 5 m, width 10 mm, height 1,5 mm
• Water protection: IP20
• Double sided adhesive tape type: 3M 9495LE
• PCB colour: White
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011s strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2 mm, height 7 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Minimum bending diameter: 4 cm
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011-W2. strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2,6 mm, height 1,5 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 590 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 7 W/m (35W), 12V (+0%, -15%)
• Dimmable LED strip with 1920 chips (384 chips/m)
• Led strip cuttable every 8 chips (every 2,083cm). Length 5 m, width 3 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-400-A0712 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 335 LED
• Lumens: 690 lm/m
• Efficiency: 80 lm/W
• Strip LED colour temperature: 4000-4500K
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 8 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 840 lm/m
• Efficiency: 105 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 8,6 W/m (86W), 12V (+0%, -15%)
• Dimmable LED strip with 3840 chips (384 chips/m)
• Led strip cuttable every 8 chips (every 2,083cm). Length 10 m, width 5 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C