Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 75 lm/m
• Efficiency: 10 lm/W
• Strip LED colour temperature: Red
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 1600 chips (320 chips/m)
• Led strip cuttable every 16 chips (every 5cm). Length 5 m, width 5 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip K52-40s-140822-W6 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1450 lm/m
• Efficiency: 145 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 11 W/m (55W), 24V (+0%, -15%)
• Dimmable LED strip with 700 leds (140 leds/m)
• Led strip cuttable every 7 leds (every 5cm). Length 5 m, width 8 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR5. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-40s-120822-C90 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2150 lm/m
• Efficiency: 100 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 24 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR5. A very narrow range of colour temperature 4000-4250K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F62-400-120822BH5 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2090 lm/m
• Efficiency: 95 lm/W
• Strip LED colour temperature: 4000-4250K
• Power consumption 24 W/m (144W), 24V (+0%, -15%)
• Dimmable LED strip with 720 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 6 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 880 lm/m
• Efficiency: 85 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 11 W/m (550W), 24V (+0%, -15%)
• Dimmable LED strip with 20000 chips (400 chips/m)
• Led strip cuttable every 8 chips (every 2cm). Length 50 m, width 5 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 500 lm/m
• Efficiency: 95 lm/W
• Strip LED colour temperature: Verde
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 1600 chips (320 chips/m)
• Led strip cuttable every 16 chips (every 5cm). Length 5 m, width 5 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

M52-400-240D22 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1750 lm/m
• Efficiency: 85 lm/W
• Strip LED colour temperature: 4000K
• Led colour temperature: 4000K
• Power consumption 19,2 W/m (96W), 24V (+0%, -15%)
• Dimmable LED strip with 1200 leds (240 leds/m)
• Led strip cuttable every 6 leds (every 2,5cm). Length 5 m, width 10 mm, height 2,5 mm
• Water protection: IP53 (known as IP65 in the commercial field)
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 4000K 3step ensures colour stability even for different lots. For further information please consult LED datasheet.

B52-40s-060822 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. It is covered by water-resistant Parylene protective film (10um on IP65 version and 25um on IP67 version). ATTENTION: the parylene strips cannot be exposed to direct sunlight. The ultraviolet rays rapidly damage the protection.

Tech specs:

• 2835 LED
• Lumens: 1380 lm/m
• Efficiency: 105 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

M52-300-240D22 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1550 lm/m
• Efficiency: 85 lm/W
• Strip LED colour temperature: 3000K
• Led colour temperature: 3000K
• Power consumption 19,2 W/m (96W), 24V (+0%, -15%)
• Dimmable LED strip with 1200 leds (240 leds/m)
• Led strip cuttable every 6 leds (every 2,5cm). Length 5 m, width 10 mm, height 2,5 mm
• Water protection: IP53 (known as IP65 in the commercial field)
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

The led strip F52-600-140822-W6 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1500 lm/m
• Efficiency: 150 lm/W
• Strip LED colour temperature: 6000K 3step
• Power consumption 11 W/m (55W), 24V (+0%, -15%)
• Dimmable LED strip with 700 leds (140 leds/m)
• Led strip cuttable every 7 leds (every 5cm). Length 5 m, width 6 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 925 lm/m
• Efficiency: 95 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 11 W/m (55W), 12V (+0%, -15%)
• Dimmable LED strip with 2000 chips (400 chips/m)
• Led strip cuttable every 8 chips (every 1cm). Length 5 m, width 5 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-Co300-360OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens: 530 lm/m
• Efficiency: 50 lm/W
• Control chip: WS2811
• Pixels per meter: 30
• Strip LED colour temperature: 3000K
• Power consumption 11 W/m (55W), 24V (+0%, -15%)
• Dimmable LED strip with 1800 chips (360 chips/m)
• Led strip cuttable every 30 chips (every 8,33cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C