Led Strip by Led model
Led Strip by Led model
Our range of LED Strips includes many models suitable for different uses. LED strips are divided into categories to help you in finding the product that best fits your needs and projects.
In this section, led strips are classified according to LED model.
Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
Tech specs:
- Lumens: 500 lm/m
- Efficiency: 95 lm/W
- Strip LED colour temperature: Verde
- Power consumption 6 W/m (30W), 24V (+0%, -15%)
- Dimmable LED strip with 1600 chips (320 chips/m)
- Led strip cuttable every 16 chips (every 5cm). Length 5 m, width 5 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED Strip made of COB LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.
LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.
The led strip F52-Co300-360OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- COB LED
- Lumens: 530 lm/m
- Efficiency: 50 lm/W
- Control chip: WS2811
- Pixels per meter: 30
- Strip LED colour temperature: 3000K
- Power consumption 11 W/m (55W), 24V (+0%, -15%)
- Dimmable LED strip with 1800 chips (360 chips/m)
- Led strip cuttable every 30 chips (every 8,33cm). Length 5 m, width 10 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Flexible LED strip with double sided tape for a fast installation even on curved surfaces.
WCOB strips feature a COB technology with a white diffusing layer that hides the yellow phosphor line, making them look white and uniform when turned off, and providing a continuous, dot-free light when turned on—perfect for visible installations.
- Lumens: 1330 lm/m
- Efficiency: 130 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 11,5 W/m (115W), 24V (+0%, -15%)
- Dimmable LED strip with 3200 chips (320 chips/m)
- Led strip cuttable every 16 chips (every 5cm). Length 10 m, width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 15 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Flexible LED strip with double sided tape for a fast installation even on curved surfaces.
WCOB strips feature a COB technology with a white diffusing layer that hides the yellow phosphor line, making them look white and uniform when turned off, and providing a continuous, dot-free light when turned on—perfect for visible installations.
- Lumens: 1140 lm/m
- Efficiency: 115 lm/W
- Strip LED colour temperature: 2700K
- Power consumption 11,5 W/m (115W), 24V (+0%, -15%)
- Dimmable LED strip with 3200 chips (320 chips/m)
- Led strip cuttable every 16 chips (every 5cm). Length 10 m, width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 15 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Flexible LED strip with double sided tape for a fast installation even on curved surfaces.
WCOB strips feature a COB technology with a white diffusing layer that hides the yellow phosphor line, making them look white and uniform when turned off, and providing a continuous, dot-free light when turned on—perfect for visible installations.
- Lumens: 1280 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 3000K
- Power consumption 11,5 W/m (115W), 24V (+0%, -15%)
- Dimmable LED strip with 3200 chips (320 chips/m)
- Led strip cuttable every 16 chips (every 5cm). Length 10 m, width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 15 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LA2-320W-264N12 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1240 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3200K
- Power consumption 12 W/m (120W), 24V (+0%, -15%)
- Dimmable LED strip with 2640 leds (264 leds/m)
- Led strip cuttable every 8 leds (every 3,03cm). Length 10 m, external width 10 mm, height 5 mm
- Silicon colour: White
- Double sided adhesive tape type: Nano Double-Sided Tape
- Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
LED strip 10m white led 4000K 3step 2835 120leds/m 230V 16,5W/m, IP65 extruded silicone tube with full edges (empty inside)
KA2-40s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1585 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 4000K
- Power consumption 16,5 W/m (165W), 230V (+0%, -15%)
- LED strip with 1200 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 10 m, external width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
KA2-30s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- Lumens: 1535 lm/m
- Efficiency: 105 lm/W
- Strip LED colour temperature: 3000K
- Power consumption 16,5 W/m (165W), 230V (+0%, -15%)
- LED strip with 1200 led (120 led/m)
- Led strip cuttable every 12 leds (every 10cm). Length 10 m, external width 12 mm, height 5 mm
- Silicon colour: Transparent
- Double sided adhesive tape type: 3M 9495LE
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.
LED Strip made of 5050 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.
LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.
The led strip F12-CoRGB-144510 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 5050 LED
- Control chip: WS2812
- Pixels per meter: 144
- Strip LED colour temperature: RGB
- Power consumption 34,6 W/m (34,6W), 5V (+0%, -15%)
- Dimmable LED strip with 144 leds (144 leds/m)
- Led strip cuttable every 1 leds (every 0,69cm). Length 1 m, external width 12 mm, height 2,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip Fx2-40s-1208F2/14-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1620 lm/m
- Efficiency: 125 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 14,4 W/m (360W), 24V (+0%, -15%)
- Dimmable LED strip with 3000 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 25 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip Fx2-40s-120DF2-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1000 lm/m
- Efficiency: 115 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 9,6 W/m (240W), 24V (+0%, -15%)
- Dimmable LED strip with 3000 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 25 m, external width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip Fx2-40s-x240DF2-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2750 lm/m
- Efficiency: 160 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 20 W/m (500W), 24V (+0%, -15%)
- Dimmable LED strip with 6000 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 25 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Led Strip by Led model
I più venduti
The led strip F52-30s-x240DF2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2000 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
