The led strip F52-BLU-060321 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3528 LED
• Strip LED colour temperature: 464-474nm
• Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

M52-BLU-060322 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 80 lm/m (estimated value)
• Efficiency: 15 lm/W
• Strip LED colour temperature: 467-470nm
• Power consumption 4,8 W/m (24W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 8 mm, height 2,5 mm
• Water protection: IP53 (known as IP65 in the commercial field)
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

These LED strips featuring epoxy coating against water are not recommended in case of prolonged use.

Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR3. A of colour temperature 2600-6500K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-CCT-A0822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens warm white 2600K: 1340 lm/m
• Lumens cool white 6500K: 1475 lm/m
• Efficiency warm white 2600K: 105 lm/W
• Efficiency cool white 6500K: 115 lm/W
• Strip LED colour temperature: 2600-6500K
• Power consumption 14,4 W/m (72W). Real power without CCT controller 28,8 W/m (144W). Input voltage 24 volt (+0%, -15%)
• Dimmable LED strip with 600 leds (60+60 leds/m)
• Led strip cuttable every 12 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

The led strip F52-CCT-156821-W5 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens warm white 2700K: 610 lm/m
• Lumens cool white 6500K: 660 lm/m
• Efficiency warm white 2700K: 116 lm/W
• Efficiency cool white 6500K: 130 lm/W
• Strip LED colour temperature: 2700-6500K
• Power consumption 5,5 W/m (27,5W). Real power without CCT controller 11 W/m (55W). Input voltage 12 volt (+0%, -15%)
• Dimmable LED strip with 780 leds (78+78 leds/m)
• Led strip cuttable every 6 leds (every 3,85cm). Length 5 m, width 5 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

The led strip F52-CCT-240D22 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens warm white 2700K: 1320 lm/m
• Lumens cool white 6500K: 1395 lm/m
• Efficiency warm white 2700K: 102 lm/W
• Efficiency cool white 6500K: 107 lm/W
• Strip LED colour temperature: 2700-6500K
• Power consumption 14,4 W/m (72W). Real power without CCT controller 28,8 W/m (144W). Input voltage 24 volt (+0%, -15%)
• Dimmable LED strip with 1200 leds (120+120 leds/m)
• Led strip cuttable every 10 leds (every 4,17cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-Co600-60511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Strip LED colour temperature: 6000-6500K
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoRGB-60511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip K52-CoRGB-060511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip F52-YEL-60811 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 280 lm/m
• Efficiency: 25 lm/W
• Strip LED colour temperature: 590-595nm
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-YEL-060812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 272 lm/m
• Efficiency: 25 lm/W
• Strip LED colour temperature: 590-595nm
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

U52-YELY-1208C2-W8 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Strip LED colour temperature: 465-470nm
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 17 mm
• Silicon colour: Yellow
• Double sided adhesive tape type: 3M 5604A VHB
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

L52-400T-120822/14.4 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1350 lm/m
• Efficiency: 105 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 4,5 mm
• Silicon colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.