The led strip F52-BLU-060321 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3528 LED
• Strip LED colour temperature: 464-474nm
• Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-BLU-60342 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3528 LED
• Strip LED colour temperature: 467-470nm
• Power consumption 4,8 W/m (24W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-Co600-60511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Strip LED colour temperature: 6000-6500K
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoRGB-60511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip K52-CoRGB-060511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip F52-YEL-60811 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 280 lm/m
• Efficiency: 25 lm/W
• Strip LED colour temperature: 590-595nm
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-YEL-060812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 272 lm/m
• Efficiency: 25 lm/W
• Strip LED colour temperature: 590-595nm
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Led strip built with Honglitronic leds, version HL-AF-5060H271BU46FU79GC-S1-T1 . For further information please consult LED datasheet.

The led strip F52-RGB-60521 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Lumens (white): 370 lm/m
• Efficiency (white): 25 lm/W
• Strip LED colour temperature: RGB
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10,5 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

Led strip built with Honglitronic leds, version HL-AF-5060H271BU46FU79GC-S1-T1 . For further information please consult LED datasheet.

K52-RGB-060521 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 5050 LED
• Lumens (white): 370 lm/m (estimated value)
• Efficiency (white): 25 lm/W
• Strip LED colour temperature: RGB
• Led colour temperature: RGB
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

Led strip built with Honglitronic leds, version HL-AF-5060H271BU46FU79GC-S1-T1 . For further information please consult LED datasheet.

K52-RGB-060522 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 5050 LED
• Lumens (white): 370 lm/m (estimated value)
• Efficiency (white): 25 lm/W
• Strip LED colour temperature: RGB
• Led colour temperature: RGB
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 12 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip L52-RGBT-060522 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Lumens: 370 lm/m
• Efficiency: 25 lm/W
• Strip LED colour temperature: RGB
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 12 mm, height 4,5 mm
• PCB colour: Transparent
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip F52-PNK-060811 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 380 lm/m
• Efficiency: 60 lm/W
• Strip LED colour temperature: -
• Power consumption 7,2 W/m (36W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C