The led strip F52-300-240CZ2-W5 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2216 LED
• Lumens: 1170 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 3050-3225K
• Power consumption 10,5 W/m (52,5W), 24V (+0%, -15%)
• Dimmable LED strip with 1200 leds (240 leds/m)
• Led strip cuttable every 1 leds (every 0,417cm). Length 5 m, width 5 mm, height 1 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 575 lm/m (estimated value)
• Efficiency: 105 lm/W
• Strip LED colour temperature: 6000K
• Power consumption 6 W/m (30W), 12V (+0%, -15%)
• Dimmable LED strip with 2430 chips (486 chips/m)
• Led strip cuttable every 9 chips (every 1,85cm). Upper welding point every 50cm, lower welding point every 1,85cm.
• Length 5 m, width 7 mm, height 4 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

U52-400W-480OR2-W3 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 350 lm/m
• Efficiency: 65 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 2400 leds (480 leds/m)
• Led strip cuttable every 12 leds (every 2,5cm). Length 5 m, width 5 mm, height 4,5 mm
• Silicon colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 575 lm/m
• Efficiency: 95 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 6,6 W/m (33W), 24V (+0%, -15%)
• Dimmable LED strip with 1600 chips (320 chips/m)
• Led strip cuttable every 16 chips (every 5cm). Upper welding point every 50cm, lower welding point every 5cm.
• Length 5 m, width 7 mm, height 4 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

U52-270W-480OR2-W3 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 285 lm/m
• Efficiency: 50 lm/W
• Strip LED colour temperature: 2700K
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 2400 leds (480 leds/m)
• Led strip cuttable every 12 leds (every 2,5cm). Length 5 m, width 5 mm, height 4,5 mm
• Silicon colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

U52-300W-480OR2-W3 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 270 lm/m
• Efficiency: 50 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 6 W/m (30W), 24V (+0%, -15%)
• Dimmable LED strip with 2400 leds (480 leds/m)
• Led strip cuttable every 12 leds (every 2,5cm). Length 5 m, width 5 mm, height 4,5 mm
• Silicon colour: White
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011s strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2 mm, height 7 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Minimum bending diameter: 4 cm
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011-W2. strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2,6 mm, height 1,5 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 590 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 7 W/m (35W), 12V (+0%, -15%)
• Dimmable LED strip with 1920 chips (384 chips/m)
• Led strip cuttable every 8 chips (every 2,083cm). Length 5 m, width 3 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 570 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 7 W/m (35W), 24V (+0%, -15%)
• Dimmable LED strip with 1920 chips (384 chips/m)
• Led strip cuttable every 16 chips (every 4,17cm). Length 5 m, width 3 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 680 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 7 W/m (35W), 12V (+0%, -15%)
• Dimmable LED strip with 1920 chips (384 chips/m)
• Led strip cuttable every 8 chips (every 2,083cm). Length 5 m, width 3 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 710 lm/m
• Efficiency: 115 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 7 W/m (35W), 24V (+0%, -15%)
• Dimmable LED strip with 1920 chips (384 chips/m)
• Led strip cuttable every 16 chips (every 4,17cm). Length 5 m, width 3 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C