Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 1990 lm/m
• Efficiency: 85 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 26 W/m (130W), 24V (+0%, -15%)
• Dimmable LED strip with 3000 chips (600 chips/m)
• Led strip cuttable every 12 chips (every 2cm). Length 5 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-Co300-360OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens: 530 lm/m
• Efficiency: 50 lm/W
• Control chip: WS2811
• Pixels per meter: 30
• Strip LED colour temperature: 3000K
• Power consumption 11 W/m (55W), 24V (+0%, -15%)
• Dimmable LED strip with 1800 chips (360 chips/m)
• Led strip cuttable every 30 chips (every 8,33cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 2835 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-Co300-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1060 lm/m
• Efficiency: 100 lm/W
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: 3000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 600 chips (120 chips/m)
• Led strip cuttable every 6 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 2835 LED chips that incorporate a controller 1903 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoCCT-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Control chip: 1903
• Pixels per meter: 20
• Strip LED colour temperature: 3000-6500K
• Power consumption 7,5 W/m (37,5W). Real power without CCT controller 15 W/m (75W). Input voltage 24 volt (+0%, -15%)
• Dimmable LED strip with 600 chips (120 chips/m)
• Led strip cuttable every 6 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-290-120DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 950 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 2900-3100K
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 12,5cm). Length 5 m, external width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

L52-REDT-120822 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Strip LED colour temperature: 620-625nm
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 12 mm, height 4,5 mm
• Silicon colour: Red
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

L52-REDR-120822 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Strip LED colour temperature: 620-625nm
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 12 mm, height 4,5 mm
• Silicon colour: Red
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

LED Strip made of COB LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoRGB-720OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 19 W/m (95W), 24V (+0%, -15%)
• Dimmable LED strip with 3600 chips (720 chips/m)
• Led strip cuttable every 36 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-GRE-120312 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3528 LED
• Strip LED colour temperature: 520-525nm
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip FE2-40s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1620 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 14,4 W/m (720W), 24V (+0%, -15%)
• Dimmable LED strip with 6000 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 50 m, external width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

L52-IBLW-264N12 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Strip LED colour temperature: Ice Blue
• Power consumption 12 W/m (60W), 24V (+0%, -15%)
• Dimmable LED strip with 1320 leds (264 leds/m)
• Led strip cuttable every 8 leds (every 3,03cm). Length 5 m, external width 10 mm, height 5 mm
• Silicon colour: White
• Double sided adhesive tape type: Nano Double-Sided Tape
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

LED strip with alternating LEDs of different color temperatures (2700K and 6500K), selectable by reversing the polarity of the cables. Connecting the cables to the power supply in standard mode (black - and red +), the LED strip will have a color temperature of 6500K. Reversing the cables (black + and red -) will result in a color temperature of 2700K. The choice of color temperature is achieved without the use of any controller.

The led strip FA2-CCT-600OR2-W5 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens warm white 2700K: 445 lm/m
• Lumens cool white 6500K: 565 lm/m
• Efficiency warm white 2700K: 60 lm/W
• Efficiency cool white 6500K: 75 lm/W
• Strip LED colour temperature: 2700-6500K
• Power consumption 8 W/m (160W), 24V (+0%, -15%)
• Dimmable LED strip with 6000 chips (300+300 chips/m)
• Led strip cuttable every 12 chips (every 2cm). Length 10 m, width 5 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.