The L52-R300T-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip.

The led strip L52-R300T-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 3000K + RGB
• Lumens white 3000K: 1660 lm/m
• Efficiency white 3000K: 125 lm/W
• Dimmable LED strip with 70+70 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
• Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 14 mm, height 5,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The F52-R600-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R600-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 6000K 3step + RGB
• Lumens white 6000K: 1735 lm/m
• Efficiency white 6000K: 130 lm/W
• Dimmable LED strip with 70+70 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
• Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

The led strip F52-RGBCCT-210H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838+2835+2835 LED
• Lumens warm white 2700K: 1560 lm/m
• Lumens cool white 6600K: 1700 lm/m
• Efficiency warm white 2700K: 120 lm/W
• Efficiency cool white 6600K: 130 lm/W
• Strip LED colour temperature: RGBCCT
• Power consumption 14,4 W/m + 14,4 W/m + 14,4 W/m (216W), 24V (+0%, -15%)
• Dimmable LED strip with 1050 leds (70+70+70 leds/m)
• Led strip cuttable every 21 leds (every 10cm). Length 5 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

The led strip K52-RGBCCT-210H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838+2835+2835 LED
• Lumens warm white 2700K: 1400 lm/m
• Lumens cool white 6600K: 1525 lm/m
• Efficiency warm white 2700K: 105 lm/W
• Efficiency cool white 6600K: 115 lm/W
• Strip LED colour temperature: RGBCCT
• Power consumption 14,4 W/m + 14,4 W/m + 14,4 W/m (216W), 24V (+0%, -15%)
• Dimmable LED strip with 1050 leds (70+70+70 leds/m)
• Led strip cuttable every 21 leds (every 10cm). Length 5 m, width 14 mm, height 5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

LED strip designed for horticulture. Due to its own spectrum of wave length this strip is suitable for stimulating the planth growth in indoor crops and hydroponic cultivation. It is not recommended to operate the 3 channels at full power unless a suitable aluminium profile is used, i.e. with a sufficiently large surface area to adequately dissipate heat. Failure to do so could result in a sharp decrease in the life of the LED in terms of hours. The led strip B52-30RB-2048O2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Led/cut point: 1) Red+Blue+Warm white: 34 2) Red: 10 3) Blue: 8 4) Warm white: 16
• LED colour temperature: 1) Red: 640nm 2) Blue: 450nm 3) Warm white: 3000K
• Dimmable LED strip with 1020 leds (204 leds/m)
• Input voltage: 24V (+0%, -15%)
• Power consumption: 1) Red+Blue+Warm white: 28,8W 2) Red: 7,2W 3) Blue: 7,2W 4) Warm white: 14,4W
• Led strip cuttable every 34 leds (every 16,67cm). Length 5 m, width 12 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• Photosynthetic Photon Flux (PPF): 1) Red+Blue+Warm white: 52,5 umol/s 2) Red: 12,4 umol/s 3) Blue: 14,2 umol/s 4) Warm white: 29,1 umol/s
• PRF: 1) Red+Blue+Warm white: 9,7 mW 2) Red: 2,1 mW 3) Blue: 2,8 mW 4) Warm white: 5,4 mW
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-30s-252822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 5100 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 45 W/m (225W), 24V (+0%, -15%)
• Dimmable LED strip with 1260 leds (252 leds/m)
• Led strip cuttable every 14 leds (every 5,55cm). Length 5 m, width 20 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

The led strip F52-30s-2248N2-F is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2760 lm/m
• Efficiency: 150 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 20 W/m (100W), 24V (+0%, -15%)
• Dimmable LED strip with 1120 leds (224 leds/m)
• Led strip cuttable every 4 leds (every 1,78cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 1990 lm/m
• Efficiency: 85 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 26 W/m (130W), 24V (+0%, -15%)
• Dimmable LED strip with 3000 chips (600 chips/m)
• Led strip cuttable every 12 chips (every 2cm). Length 5 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 2045 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 26 W/m (130W), 24V (+0%, -15%)
• Dimmable LED strip with 3000 chips (600 chips/m)
• Led strip cuttable every 12 chips (every 2cm). Length 5 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-40s-1208F2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2600 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 24 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C