12V led strip
The led strip F52-27s-120DF1 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 950 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 2700K 3step
- Power consumption 9,6 W/m (48W), 12V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 3 leds (every 2,5cm). Length 5 m, external width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-27s-060DF1 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 500 lm/m
- Efficiency: 115 lm/W
- Strip LED colour temperature: 2700K 3step
- Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, external width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
Zig-Zag LED strips are flexible light strips designed with a wavy or zig-zag pattern, which allows them to be bent not only lengthwises, like traditional strips, but also horizontally and around curves.
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 3000K 3step ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F52-30s-060821Z is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 825 lm/m
- Efficiency: 115 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 8 W/m (40W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, external width 6 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
The led strip F52-290-060DF1 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 500 lm/m
- Efficiency: 115 lm/W
- Strip LED colour temperature: 2900-3100K
- Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, external width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
This led strip is flexible with an adhesive on its back side for quick installation even on curved surfaces. Not suitable for painted surfaces
Tech specs:
- Lumens: 390 lm/m
- Efficiency: 90 lm/W
- Strip LED colour temperature: 2900-3100K
- Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9080HL
- Working temperature: -10°C ~ +45°C
LED strip 5m warm white 3000K 3step 120 leds/m Honglitronic 2835 12V 5,5W/m, 3mm PCB
Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.
The led strip F52-30s-120821-W3 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 600 lm/m
- Efficiency: 120 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 3 leds (every 2,5cm). Length 5 m, external width 3 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
LED strip 5m white 4000K 3step 120leds/m 2835 12V 4,8W/m current control system, IP65 extruded silicone tube with full edges (empty inside)
The K52-40s-x120D21A/4.8 LED strips feature an integrated regulation chip that stabilizes current and protects the LEDs from voltage surges typical in battery-powered systems. Thanks to their wide 11–18V power supply range, they guarantee uniform, constant light and a longer lifespan with no risk of burnout. They are perfect for motorhomes, boats, campervans, and off-grid installations. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
K52-40s-x120D21A/4.8 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- 2835 LED
- Lumens: 795 lm/m
- Efficiency: 170 lm/W
- Strip LED colour temperature: 4000K 3step
- Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 4 leds (every 3,33cm). Length 5 m, external width 10 mm, height 4 mm
- Water protection: IP65
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 12 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.
LED strip 5m warm white 3000K 3step 120leds/m 2835 12V 4,8W/m current control system, IP65 extruded silicone tube with full edges (empty inside)
The K52-30s-x120D21A/4.8 LED strips feature an integrated regulation chip that stabilizes current and protects the LEDs from voltage surges typical in battery-powered systems. Thanks to their wide 11–18V power supply range, they guarantee uniform, constant light and a longer lifespan with no risk of burnout. They are perfect for motorhomes, boats, campervans, and off-grid installations. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.
K52-30s-x120D21A/4.8 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- 2835 LED
- Lumens: 765 lm/m
- Efficiency: 167 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 4 leds (every 3,33cm). Length 5 m, external width 10 mm, height 4 mm
- Water protection: IP65
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 12 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.
LED strip 5m warm white 3000K 3step 120leds/m 2835 12V 9,6W/m, IP65 extruded silicone tube with full edges (empty inside)
K52-30s-120DF1 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- 2835 LED
- Lumens: 900 lm/m (estimated value)
- Efficiency: 105 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 9,6 W/m (48W), 12V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 3 leds (every 2,5cm). Length 5 m, external width 10 mm, height 4 mm
- Water protection: IP65
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.
The led strip F52-30s-060DF1 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 500 lm/m
- Efficiency: 115 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, external width 8 mm, height 2 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
LED strip 5m warm white 3000K 3step 60leds/m 2835 12V 4,8W/m, IP65 extruded silicone tube with full edges (empty inside)
K52-30s-060DF1 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
- 2835 LED
- Lumens: 475 lm/m (estimated value)
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, external width 10 mm, height 4 mm
- Water protection: IP65
- PCB colour: White
- Double sided adhesive tape type: 3M 5604A VHB
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.
Led strip was built with XUYU leds, version XY-2835W_CT. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.
The led strip F52-30s-0608F1 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1350 lm/m
- Efficiency: 105 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
- Dimmable LED strip with 300 leds (60 leds/m)
- Led strip cuttable every 3 leds (every 5cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +50°C
- IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
12V led strip
I più venduti
The led strip F52-30s-x240DF2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 2000 lm/m
- Efficiency: 155 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 1200 leds (240 leds/m)
- Led strip cuttable every 8 leds (every 3,33cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
The led strip F52-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
- 2835 LED
- Lumens: 1410 lm/m
- Efficiency: 110 lm/W
- Strip LED colour temperature: 3000K 3step
- Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
- Dimmable LED strip with 600 leds (120 leds/m)
- Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 10 mm, height 1,5 mm
- PCB colour: White
- Double sided adhesive tape type: 3M 9495LE
- 10 cm power input cables on both sides of the strip
- Working temperature: -10°C ~ +45°C
