The led strip F52-RGB-120112-W10 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3535 LED
• Lumens (white): 800 lm/m
• Efficiency (white): 35 lm/W
• Strip LED colour temperature: RGB
• Power consumption 23 W/m (115W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 3,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RGB-120G12-W6 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens (white): 390 lm/m
• Efficiency (white): 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 6 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RED-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 460 lm/m (estimated value)
• Efficiency: 20 lm/W
• Strip LED colour temperature: 620-625nm
• Power consumption 24 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RED-120312 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3528 LED
• Strip LED colour temperature: 620-625nm
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RED-120322 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3528 LED
• Strip LED colour temperature: 620-625nm
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-FFOO-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1320 lm/m
• Efficiency: 70 lm/W
• Strip LED colour temperature: 3000-3500K
• Power consumption 24 W/m (120W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 2835 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-Co300-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1060 lm/m
• Efficiency: 100 lm/W
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: 3000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 600 chips (120 chips/m)
• Led strip cuttable every 6 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 2835 LED chips that incorporate a controller 1903 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoCCT-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Control chip: 1903
• Pixels per meter: 20
• Strip LED colour temperature: 3000-6500K
• Power consumption 7,5 W/m (37,5W). Real power without CCT controller 15 W/m (75W). Input voltage 24 volt (+0%, -15%)
• Dimmable LED strip with 600 chips (120 chips/m)
• Led strip cuttable every 6 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-290-120DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 950 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 2900-3100K
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 12,5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

L52-REDT-120822 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Strip LED colour temperature: 620-625nm
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 4,5 mm
• Silicon colour: Red
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

L52-REDR-120822 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Strip LED colour temperature: 620-625nm
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 4,5 mm
• Silicon colour: Red
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The strip F52-R400-120512 is equipped with a 5050 4-in-1 led: its compact design allows RGB+4000K coloring to be enclosed in a single led. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R400-120512 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 4000K + RGB
• Lumens white 4000K: 780 lm/m
• Efficiency white 4000K: 90 lm/W
• Dimmable LED strip with 120 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 9 W/m (117W), 24V (+0%, -15%),
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 1,5 m power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C