The F52-400-480OD1A/4.8 LED strips feature an integrated regulation chip that stabilizes current and protects the LEDs from voltage surges typical in battery-powered systems. Thanks to their wide 11–18V power supply range, they guarantee uniform, constant light and a longer lifespan with no risk of burnout. They are perfect for motorhomes, boats, campervans, and off-grid installations. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

• Lumens: 480 lm/m
• Efficiency: 106 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 4,8 W/m (24W), 12V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 12 chips (every 2,5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The F52-300-480OD1A/2.4 LED strips feature an integrated regulation chip that stabilizes current and protects the LEDs from voltage surges typical in battery-powered systems. Thanks to their wide 11–18V power supply range, they guarantee uniform, constant light and a longer lifespan with no risk of burnout. They are perfect for motorhomes, boats, campervans, and off-grid installations. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

• Lumens: 215 lm/m
• Efficiency: 98 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 2,4 W/m (12W), 12V (+0%, -15%)
• Dimmable LED strip with 2400 chips (480 chips/m)
• Led strip cuttable every 12 chips (every 2,5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2814 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip K52-CoR300-784OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2814
• Pixels per meter: 14
• Strip LED colour temperature: RGB+3000K
• Power consumption 21 W/m (105W), 24V (+0%, -15%)
• Dimmable LED strip with 3920 chips (392+392 chips/m)
• Led strip cuttable every 56 chips (every 7,14cm). Length 5 m, width 12 mm, height 6 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 20 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

L52-270Y-120822 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Strip LED colour temperature: 2700K 3step
• Power consumption 12 W/m (60W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, external width 12 mm, height 4,5 mm
• Silicon colour: Yellow
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip F52-RGBCCT-840OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens warm white 2700K: 415 lm/m
• Lumens cool white 6500K: 410 lm/m
• Efficiency warm white 2700K: 80 lm/W
• Efficiency cool white 6500K: 80 lm/W
• Strip LED colour temperature: RGB + 2700-6500°K
• Power consumption 12 W/m + 5 W/m + 5 W/m (110W), 24V (+0%, -15%)
• Dimmable LED strip with 4200 leds (280+280+280 leds/m)
• Led strip cuttable every 30 leds (every 3,55cm). Length 5 m, external width 12 mm, height 3 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-40s-238DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2600 lm/m
• Efficiency: 150 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 19,2 W/m (96W), 24V (+0%, -15%)
• Dimmable LED strip with 1190 leds (238 leds/m)
• Led strip cuttable every 7 leds (every 2,94cm). Length 5 m, external width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C