Led strip built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR3. A very narrow range of colour temperature between 3350-3550K ensures colour stability even for different lots. IP65 protection applied on the strip keep cool the led colour temperature. For further information please consult LED datasheet.
Dx2-260-060822-0.7 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.
Tech specs:
2835 LED
Lumens: 820 lm/m (estimated value)
Efficiency: 60 lm/W
Strip LED colour temperature: 3350-3550K
Led colour temperature: 2600-2800K
Power consumption 14,4 W/m (10,08W), 24V (+0%, -15%)
Dimmable LED strip with 42 leds (60 leds/m)
Led strip cuttable every 6 leds (every 10cm). Length 0,7 m, width 10 mm, height 1,5 mm
Water protection: IP53 (known as IP65 in the commercial field)
PCB colour: White
Double sided adhesive tape type: 3M 9495LE
10 cm power input cables on both sides of the strip
Working temperature: -10°C ~ +50°C
IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
These LED strips featuring epoxy coating against water are not recommended in case of prolonged use.
Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR3. A very narrow range of colour temperature 2900-3000K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip F12-290-036822A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
2835 LED
Lumens: 790 lm/m
Efficiency: 100 lm/W
Strip LED colour temperature: 2900-3000K
Power consumption 8,6 W/m (8,6W), 24V (+0%, -15%)
Dimmable LED strip with 36 leds (36 leds/m)
Led strip cuttable every 6 leds (every 16,67cm). Length 1 m, width 10 mm, height 1,5 mm
PCB colour: White
Double sided adhesive tape type: 3M 9495LE
10 cm power input cables on both sides of the strip
Working temperature: -10°C ~ +50°C
IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
Led strip was built with Honglitronic leds, version HL-A-2835H421W-S1-08-HR3. A very narrow range of colour temperature 2900-3000K ensures colour stability even for different lots. For further information please consult LED datasheet.
The led strip K42-290-060822 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.
Tech specs:
2835 LED
Lumens: 1200 lm/m
Efficiency: 100 lm/W
Strip LED colour temperature: 2900-3000K
Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
Dimmable LED strip with 300 leds (60 leds/m)
Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 12 mm, height 4 mm
Water protection: IP64
Double sided adhesive tape type: 3M 5604A VHB
PCB colour: White
Working temperature: -10°C ~ +50°C
For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.
The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.