LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011s strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2 mm, height 7 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Minimum bending diameter: 4 cm
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F12-CoRGB-144510 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2812
• Pixels per meter: 144
• Strip LED colour temperature: RGB
• Power consumption 34,6 W/m (34,6W), 5V (+0%, -15%)
• Dimmable LED strip with 144 leds (144 leds/m)
• Led strip cuttable every 1 leds (every 0,69cm). Length 1 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip K252-RGB-0968ZH is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 235 lm/m
• Efficiency: 25 lm/W
• Strip LED colour temperature: RGB
• Power consumption 11 W/m (275W), 230V (+0%, -15%)
• LED strip with 2400 led (96 led/m)
• Led strip cuttable every 48 leds (every 50cm). Length 25 m, width 12 mm, height 5 mm
• PCB colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

The led strip L252-RGBT-07251H is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Lumens: 400 lm/m (estimated value)
• Efficiency: 35 lm/W
• Strip LED colour temperature: RGB
• Power consumption 12 W/m (300W), 230V (+0%, -15%)
• LED strip with 1800 led (72 led/m)
• Led strip cuttable every 36 leds (every 50cm). Length 25 m, width 12 mm, height 4,5 mm
• PCB colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011-W2. strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2,6 mm, height 1,5 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoRGB-60511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip K52-CoRGB-060511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

LED Strip made of COB LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoRGB-720OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 19 W/m (95W), 24V (+0%, -15%)
• Dimmable LED strip with 3600 chips (720 chips/m)
• Led strip cuttable every 36 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RGB-120112-W10 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3535 LED
• Lumens (white): 800 lm/m
• Efficiency (white): 35 lm/W
• Strip LED colour temperature: RGB
• Power consumption 23 W/m (115W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 3,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-RGB-112G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens (white): 640 lm/m
• Efficiency (white): 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 560 leds (112 leds/m)
• Led strip cuttable every 7 leds (every 6,25cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip K52-RGB-112G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 640 lm/m
• Efficiency: 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 560 leds (112 leds/m)
• Led strip cuttable every 7 leds (every 6,25cm). Length 5 m, width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip L52-RGB-112G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 640 lm/m
• Efficiency: 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 560 leds (112 leds/m)
• Led strip cuttable every 7 leds (every 6,25cm). Length 5 m, width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.