LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011s strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2 mm, height 7 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Minimum bending diameter: 4 cm
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F12-CoRGB-144510 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2812
• Pixels per meter: 144
• Strip LED colour temperature: RGB
• Power consumption 34,6 W/m (34,6W), 5V (+0%, -15%)
• Dimmable LED strip with 144 leds (144 leds/m)
• Led strip cuttable every 1 leds (every 0,69cm). Length 1 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-290-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1450 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 2900-3100K
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-35s-1208F1/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1550 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 3500K 3step
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 2,5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011-W2. strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2,6 mm, height 1,5 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

The led strip Fx2-30s-1208F2/14-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1510 lm/m
• Efficiency: 115 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 14,4 W/m (360W), 24V (+0%, -15%)
• Dimmable LED strip with 3000 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 25 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip Fx2-30s-1208F2-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2345 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 24 W/m (600W), 24V (+0%, -15%)
• Dimmable LED strip with 3000 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 25 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip K252-RGB-0968ZH is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 235 lm/m
• Efficiency: 25 lm/W
• Strip LED colour temperature: RGB
• Power consumption 11 W/m (275W), 230V (+0%, -15%)
• LED strip with 2400 led (96 led/m)
• Led strip cuttable every 48 leds (every 50cm). Length 25 m, width 12 mm, height 5 mm
• PCB colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

The led strip L252-RGBT-07251H is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Lumens: 400 lm/m (estimated value)
• Efficiency: 35 lm/W
• Strip LED colour temperature: RGB
• Power consumption 12 W/m (300W), 230V (+0%, -15%)
• LED strip with 1800 led (72 led/m)
• Led strip cuttable every 36 leds (every 50cm). Length 25 m, width 12 mm, height 4,5 mm
• PCB colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

The led strip FE2-27s-1208F2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2250 lm/m
• Efficiency: 105 lm/W
• Strip LED colour temperature: 2700K 3step
• Power consumption 24 W/m (1200W), 24V (+0%, -15%)
• Dimmable LED strip with 6000 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 50 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip FE2-30s-1208F2/14.4 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1450 lm/m (estimated value)
• Efficiency: 115 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 14,4 W/m (720W), 24V (+0%, -15%)
• Dimmable LED strip with 6000 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 50 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip FE2-30s-1208F2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 2345 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 24 W/m (1200W), 24V (+0%, -15%)
• Dimmable LED strip with 6000 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 50 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C