LED Strip made of 5050 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F12-CoRGB-144510 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2812
• Pixels per meter: 144
• Strip LED colour temperature: RGB
• Power consumption 34,6 W/m (34,6W), 5V (+0%, -15%)
• Dimmable LED strip with 144 leds (144 leds/m)
• Led strip cuttable every 1 leds (every 0,69cm). Length 1 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 4000K 3step ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F32-40s-060820 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 450 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 5,5 W/m (16,5W), 5V (+0%, -15%)
• Dimmable LED strip with 180 leds (60 leds/m)
• Led strip cuttable every 1 leds (every 1,67cm). Length 3 m, width 5 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 3000K 3step ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F32-30s-060820 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 460 lm/m
• Efficiency: 90 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 5,5 W/m (16,5W), 5V (+0%, -15%)
• Dimmable LED strip with 180 leds (60 leds/m)
• Led strip cuttable every 1 leds (every 1,67cm). Length 3 m, width 5 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 6000-6500K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F32-600-060820 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 475 lm/m
• Efficiency: 95 lm/W
• Strip LED colour temperature: 6000-6500K
• Power consumption 5,5 W/m (16,5W), 5V (+0%, -15%)
• Dimmable LED strip with 180 leds (60 leds/m)
• Led strip cuttable every 1 leds (every 1,67cm). Length 3 m, width 5 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 405 lm/m
• Efficiency: 60 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 8 W/m (40W), 5V (+0%, -15%)
• Dimmable LED strip with 1600 chips (320 chips/m)
• Led strip cuttable every 16 chips (every 5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Flexible LED strip with double sided tape for a fast installation even on curved surfaces. Thanks to the coating that covers the LEDs, the COB strip allows to create a dot free light with a wide beam angle.

Tech specs:

• Lumens: 410 lm/m
• Efficiency: 55 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 8 W/m (40W), 5V (+0%, -15%)
• Dimmable LED strip with 1600 chips (320 chips/m)
• Led strip cuttable every 16 chips (every 5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 15 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C