LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011s strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2 mm, height 7 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Minimum bending diameter: 4 cm
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F12-CoRGB-144510 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2812
• Pixels per meter: 144
• Strip LED colour temperature: RGB
• Power consumption 34,6 W/m (34,6W), 5V (+0%, -15%)
• Dimmable LED strip with 144 leds (144 leds/m)
• Led strip cuttable every 1 leds (every 0,69cm). Length 1 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-30s-120822-90° is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1470 lm/m
• Efficiency: 115 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

LED Strip made of 0807 LED chips that incorporate a controller WS2812 inside. These strips can be used only with the specific controllers.

Thanks to their compact size, F52-CoRGB-133011-W2. strips are suitable for creating lines of light in the widest variety of applications.

• 0807 LED
• Control chip: WS2812
• Pixels per meter: 133
• Strip LED colour temperature: RGB
• Power consumption 5,5 W/m (27,5W), 12V (+0%, -15%)
• Dimmable LED strip with 665 leds (133 leds/m)
• Led strip cuttable every 1 leds (every 0,75cm). Length 5 m, width 2,6 mm, height 1,5 mm
• PCB colour: White
• Power input cable on one side of the strip only
• Wire length: 25 cm
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoRGB-60511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip K52-CoRGB-060511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

LED Strip made of COB LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips (also known as RGBIC) are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-CoRGB-720OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: RGB
• Power consumption 19 W/m (95W), 24V (+0%, -15%)
• Dimmable LED strip with 3600 chips (720 chips/m)
• Led strip cuttable every 36 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The innovation of LED technology has allowed to produce diodes emitting a light that imitates natural light. This leads to a reduction in the emission of blue light that is common in traditional LEDs and, as a consequence, to lighting solutions that enhance our wellbeing. The light emitted by these LEDs reduces eye fatigue, supports a favorable circadian rhythm and improves the sharpness of the colors.

Tech specs:

• 2835 LED
• Lumens: 1550 lm/m
• Efficiency: 100 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 17 W/m (85W), 24V (±1%),
• Dimmable LED strip with 640 leds (128 leds/m)
• Led strip cuttable every 8 leds (every 6,25cm). Length 5 m, width 8 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED strip featuring one warm white circadian violet LED chip and one high CRI cool white LED with light spectrum similar to sun. The colour temperature range is 2700-5000K to ensure the same colour even in different batches of production.

The led strip F52-CCT-2568U4A is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens warm white 2700K: 2400 lm/m
• Lumens cool white 5000K: 3000 lm/m
• Efficiency warm white 2700K: 100 lm/W
• Efficiency cool white 5000K: 130 lm/W
• Strip LED colour temperature: 2700-5000K
• Power consumption 26 W/m (130W). Real power without CCT controller 52 W/m (260W). Input voltage 48 volt (+0%, -15%)
• Dimmable LED strip with 1280 leds (128+128 leds/m)
• Led strip cuttable every 32 leds (every 12,5cm). Length 5 m, width 12 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.
• Working temperature: -10°C ~ +45°C

LED Strip made of 5050 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-Co600-60511 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Control chip: WS2811
• Strip LED colour temperature: 6000-6500K
• Power consumption 13 W/m (65W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of COB LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-Co300-360OR2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• COB LED
• Lumens: 530 lm/m
• Efficiency: 50 lm/W
• Control chip: WS2811
• Pixels per meter: 30
• Strip LED colour temperature: 3000K
• Power consumption 11 W/m (55W), 24V (+0%, -15%)
• Dimmable LED strip with 1800 chips (360 chips/m)
• Led strip cuttable every 30 chips (every 8,33cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

LED Strip made of 2835 LED chips that incorporate a controller WS2811 inside. These strips can be used only with the specific controllers.

LED control strips are controllable on a pixel-by-pixel basis using dedicated controllers. A pixel corresponds to the single cut of the strip.

The led strip F52-Co300-120812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1060 lm/m
• Efficiency: 100 lm/W
• Control chip: WS2811
• Pixels per meter: 20
• Strip LED colour temperature: 3000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 600 chips (120 chips/m)
• Led strip cuttable every 6 chips (every 5cm). Length 5 m, width 10 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C