L52-REDR-120822 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Strip LED colour temperature: 620-625nm
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 4,5 mm
• Silicon colour: Red
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The strip F52-R400-120512 is equipped with a 5050 4-in-1 led: its compact design allows RGB+4000K coloring to be enclosed in a single led. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R400-120512 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 4000K + RGB
• Lumens white 4000K: 780 lm/m
• Efficiency white 4000K: 90 lm/W
• Dimmable LED strip with 120 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 9 W/m (117W), 24V (+0%, -15%),
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 1,5 m power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The strip F52-R300-120512 is equipped with a 5050 4-in-1 led: its compact design allows RGB+3000K coloring to be enclosed in a single led. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R300-120512 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 3000K + RGB
• Lumens white 3000K: 850 lm/m
• Efficiency white 3000K: 90 lm/W
• Dimmable LED strip with 120 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 9 W/m (117W), 24V (+0%, -15%),
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 2,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-FFOO-060811 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 860 lm/m
• Efficiency: 70 lm/W
• Strip LED colour temperature: -
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

K252-400-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1585 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 16,5 W/m (412,5W), 230V (+0%, -15%)
• LED strip with 3000 led (120 led/m)
• Led strip cuttable every 12 leds (every 10cm). Length 25 m, width 12 mm, height 5 mm
• Silicon colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

K502-400-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1585 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 16,5 W/m (825W), 230V (+0%, -15%)
• LED strip with 6000 led (120 led/m)
• Led strip cuttable every 12 leds (every 10cm). Length 50 m, width 12 mm, height 5 mm
• Silicon colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

The led strip F52-FFOO-60812 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 970 lm/m
• Efficiency: 75 lm/W
• Strip LED colour temperature: -
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

KA2-40s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1585 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 16,5 W/m (165W), 230V (+0%, -15%)
• LED strip with 1200 led (120 led/m)
• Led strip cuttable every 12 leds (every 10cm). Length 10 m, width 12 mm, height 5 mm
• Silicon colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

KA2-30s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1535 lm/m
• Efficiency: 105 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 16,5 W/m (165W), 230V (+0%, -15%)
• LED strip with 1200 led (120 led/m)
• Led strip cuttable every 12 leds (every 10cm). Length 10 m, width 12 mm, height 5 mm
• Silicon colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

K252-300-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1540 lm/m
• Efficiency: 105 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 16,5 W/m (412,5W), 230V (+0%, -15%)
• LED strip with 3000 led (120 led/m)
• Led strip cuttable every 12 leds (every 10cm). Length 25 m, width 12 mm, height 5 mm
• Silicon colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

K502-300-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1540 lm/m
• Efficiency: 105 lm/W
• Strip LED colour temperature: 3000K
• Power consumption 16,5 W/m (825W), 230V (+0%, -15%)
• LED strip with 6000 led (120 led/m)
• Led strip cuttable every 12 leds (every 10cm). Length 50 m, width 12 mm, height 5 mm
• Silicon colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

K52-40s-1208ZH is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Lumens: 1585 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K
• Power consumption 16,5 W/m (82,5W), 230V (+0%, -15%)
• LED strip with 600 led (120 led/m)
• Led strip cuttable every 12 leds (every 10cm). Length 5 m, width 12 mm, height 5 mm
• Silicon colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.