K52-40s-1208F2/14.4 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 2835 LED
• Lumens: 1430 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K 3step
• Led colour temperature: 4000K 3step
• Power consumption 14,4 W/m (72W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 12 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

The K52-R40s-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip.

The led strip K52-R40s-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 4000K 3step + RGB
• Lumens white 4000K: 1875 lm/m
• Efficiency white 4000K: 140 lm/W
• Dimmable LED strip with 70+70 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
• Led strip cutting points every 14 leds (every 16,5cm). Length 5000 m, width 14 mm, height 5,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip Fx2-40s-120DF2-25 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1000 lm/m
• Efficiency: 115 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 9,6 W/m (240W), 24V (+0%, -15%)
• Dimmable LED strip with 3000 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 25 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip FE2-40s-120DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1000 lm/m
• Efficiency: 115 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 9,6 W/m (480W), 24V (+0%, -15%)
• Dimmable LED strip with 6000 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 50 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-40s-120DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1000 lm/m
• Efficiency: 115 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

L52-IBLW-264N12 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• Strip LED colour temperature: Ice Blue
• Power consumption 12 W/m (60W), 24V (+0%, -15%)
• Dimmable LED strip with 1320 leds (264 leds/m)
• Led strip cuttable every 8 leds (every 3,03cm). Length 5 m, width 10 mm, height 5 mm
• Silicon colour: White
• Double sided adhesive tape type: Nano Double-Sided Tape
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The F52-R30s-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip. The colour temperature of white led has a very narrow range.

The led strip F52-R30s-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 3000K 3step + RGB
• Lumens white 3000K: 1660 lm/m
• Efficiency white 3000K: 125 lm/W
• Dimmable LED strip with 70+70 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
• Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 12 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

K52-40s-120DF2 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces.

Tech specs:

• 2835 LED
• Lumens: 950 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 4000K 3step
• Led colour temperature: 4000K 3step
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 10 mm, height 4 mm
• Water protection: IP65
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The energetic class refers to the light source installed inside. The luminous flux is lower and depends on the kind of IP protection.

Led strip was built with XUYU leds, version XY-2835W_CT. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-27s-0608F1 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1320 lm/m
• Efficiency: 100 lm/W
• Strip LED colour temperature: 2700K 3step
• Power consumption 14,4 W/m (72W), 12V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 3 leds (every 5cm). Length 5 m, width 10 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

The K52-R30s-140H12 led strip produced with two different leds: a white 2835 led for a good lighting and a RGB led for colour changing effects. In this way, you can use two different functions by installing only one led strip.

The led strip K52-R30s-140H12 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• Strip LED colour temperature: 3000K 3step + RGB
• Lumens white 3000K: 1660 lm/m
• Efficiency white 3000K: 125 lm/W
• Dimmable LED strip with 70+70 leds/m.
• Power consumption RGB led + monochrome led 14,4 W/m + 14,4 W/m (144W), 24V (+0%, -15%),
• Led strip cutting points every 14 leds (every 10cm). Length 5000 m, width 14 mm, height 5,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip F52-40s-1208F2-W5 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1050 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 9,6 W/m (48W), 24V (+0%, -15%)
• Dimmable LED strip with 600 leds (120 leds/m)
• Led strip cuttable every 6 leds (every 5cm). Length 5 m, width 5 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip F52-27s-060DF2 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 475 lm/m
• Efficiency: 110 lm/W
• Strip LED colour temperature: 2700K 3step
• Power consumption 4,8 W/m (24W), 24V (+0%, -15%)
• Dimmable LED strip with 300 leds (60 leds/m)
• Led strip cuttable every 6 leds (every 10cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C