The led strip K252-RGB-0968ZH is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 235 lm/m
• Efficiency: 25 lm/W
• Strip LED colour temperature: RGB
• Power consumption 11 W/m (275W), 230V (+0%, -15%)
• LED strip with 2400 led (96 led/m)
• Led strip cuttable every 48 leds (every 50cm). Length 25 m, width 12 mm, height 5 mm
• PCB colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

The led strip L252-RGBT-07251H is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 5050 LED
• Lumens: 400 lm/m (estimated value)
• Efficiency: 35 lm/W
• Strip LED colour temperature: RGB
• Power consumption 12 W/m (300W), 230V (+0%, -15%)
• LED strip with 1800 led (72 led/m)
• Led strip cuttable every 36 leds (every 50cm). Length 25 m, width 12 mm, height 4,5 mm
• PCB colour: Transparent
• Double sided adhesive tape type: 3M 9495LE
• Working temperature: -10°C ~ +50°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

WARNING: STRIP FOR OUTDOOR USE. 230V strips are subject to flickering as they are powered directly from the network voltage.

Zig-Zag LED strips are flexible light strips designed with a wavy or zig-zag pattern, which allows them to be bent not only lengthwises, like traditional strips, but also horizontally and around curves.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-40s-096822Z is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1110 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 4000K 3step
• Power consumption 10 W/m (50W), 24V (+0%, -15%)
• Dimmable LED strip with 480 leds (96 leds/m)
• Led strip cuttable every 6 chips (every 6,25cm). Length 5 m, width 6 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Zig-Zag LED strips are flexible light strips designed with a wavy or zig-zag pattern, which allows them to be bent not only lengthwises, like traditional strips, but also horizontally and around curves.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. The 3step LED allows to install or replace LED strips having the same colour temperature without seeing different shades of colour even for different product batches. For further information please consult LED datasheet.

The led strip F52-30s-096822Z is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1060 lm/m
• Efficiency: 120 lm/W
• Strip LED colour temperature: 3000K 3step
• Power consumption 10 W/m (50W), 24V (+0%, -15%)
• Dimmable LED strip with 480 leds (96 leds/m)
• Led strip cuttable every 6 chips (every 6,25cm). Length 5 m, width 6 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

Zig-Zag LED strips are flexible light strips designed with a wavy or zig-zag pattern, which allows them to be bent not only lengthwises, like traditional strips, but also horizontally and around curves.

Led strip was built with Honglitronic leds, version HL-AM-2835H421W-S1-08-HR3-3SDCM. A very narrow range of colour temperature 6000-6500K ensures colour stability even for different lots. For further information please consult LED datasheet.

The led strip F52-600-096822Z is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 2835 LED
• Lumens: 1140 lm/m
• Efficiency: 125 lm/W
• Strip LED colour temperature: 6000-6500K
• Power consumption 10 W/m (50W), 24V (+0%, -15%)
• Dimmable LED strip with 480 leds (96 leds/m)
• Led strip cuttable every 6 leds (every 6,25cm). Length 5 m, width 6 mm, height 1,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +50°C
• IEC/TR 62778:2014 photobiological risk certificate: risk Group 1 when used as light source.

The led strip F52-RGB-112G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens (white): 640 lm/m
• Efficiency (white): 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 560 leds (112 leds/m)
• Led strip cuttable every 7 leds (every 6,25cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip K52-RGB-112G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 640 lm/m
• Efficiency: 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 560 leds (112 leds/m)
• Led strip cuttable every 7 leds (every 6,25cm). Length 5 m, width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip L52-RGB-112G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 640 lm/m
• Efficiency: 45 lm/W
• Strip LED colour temperature: RGB
• Power consumption 16 W/m (80W), 24V (+0%, -15%)
• Dimmable LED strip with 560 leds (112 leds/m)
• Led strip cuttable every 7 leds (every 6,25cm). Length 5 m, width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip F52-RGB-070G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens (white): 500 lm/m
• Efficiency (white): 40 lm/W
• Strip LED colour temperature: RGB
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 350 leds (70 leds/m)
• Led strip cuttable every 7 leds (every 10cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

The led strip K52-RGB-070G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 500 lm/m
• Efficiency: 40 lm/W
• Strip LED colour temperature: RGB
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 350 leds (70 leds/m)
• Led strip cuttable every 7 leds (every 10cm). Length 5 m, width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 5604A VHB
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

The led strip L52-RGB-070G12-W8 is flexible and features a double-sided tape on its back side for quick installation even on curved surfaces.

Tech specs:

• 3838 LED
• Lumens: 500 lm/m
• Efficiency: 40 lm/W
• Strip LED colour temperature: RGB
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 350 leds (70 leds/m)
• Led strip cuttable every 7 leds (every 10cm). Length 5 m, width 10 mm, height 4,5 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.

B52-RGB-070G12-W8 is a flexible waterproof led strip with 3M self-adhesive on its back side for quick installation even on curve surfaces. It is covered by water-resistant Parylene protective film (10um on IP65 version and 25um on IP67 version). ATTENTION: the parylene strips cannot be exposed to direct sunlight. The ultraviolet rays rapidly damage the protection.

Tech specs:

• 3838 LED
• Lumens: 500 lm/m
• Efficiency: 40 lm/W
• Strip LED colour temperature: RGB
• Power consumption 13,3 W/m (66,5W), 24V (+0%, -15%)
• Dimmable LED strip with 350 leds (70 leds/m)
• Led strip cuttable every 7 leds (every 10cm). Length 5 m, width 8 mm, height 2 mm
• PCB colour: White
• Double sided adhesive tape type: 3M 9495LE
• 10 cm power input cables on both sides of the strip
• Working temperature: -10°C ~ +45°C

For a perfect adhesion of the double-sided tape the temperature both of the LED strip and the surface where it is installed should be between 21 and 38°C. The LED strip will be totally fixed after 72 hours approximately. The double-sided adhesive does not guarantee a seal on painted surfaces.