Lighting • LED Strips • Profiles • Controllers • Power Supplies • Accessories Glossary of LED Lighting
A
1000 series aluminum
Pure aluminum for high-reflectance indoor reflectors in LED profiles.
1050 aluminum
Pure aluminum for internal reflectors in LED profiles.
120-degree corner connector
Connector for 120° joints between LED strips.
135-degree corner connector
Connector for 135° joints between LED strips.
16-zone controller
LED controller managing 16 independent zones.
16-scene controller
LED controller with 16 memorizable lighting scenes.
180-degree corner connector
Connector for 180° joints between LED strips.
1-10V controller
LED controller with 1-10V analog output for dimming.
1-10V dimmer
0–10V variant where 1V minimum (~10% light) replaces full off.
1-10V dimming
Brightness control using a 1-10V analog signal.
1 kHz PWM dimming
1 kHz PWM dimming for flicker-free LED strips.
2.4 GHz controller
LED controller with 2.4 GHz wireless communication.
2-channel controller
Controller with two channels for CCT LED strips (warm white + cool white).
2-circuit track
Electrified track with two independent circuits for LEDs.
2-pin connector
For monochromatic strips; two contacts (+ and -).
2-stage dimming
Dimming in two stages: full brightness and reduced level.
2-wire connection
Two-wire connection for monochromatic LED strips (+ and −).
2-wire dimming
Two-wire dimming (phase and return) without neutral; for TRIAC.
3-channel controller
Controller with three channels for RGB LED strips.
3-pin connector
For CCT strips; three contacts.
3-way connector
Connector for branching to three LED strip outputs.
3-wire dimming
Dimming with three wires: phase, dimmed phase and neutral.
3M 200MP adhesive tape
3M 200MP series transfer double-sided tape for LED strips; good adhesion to plastics and metals.
3M 300LSE adhesive tape
3M double-sided tape with very high adhesion to low surface energy materials.
3M 9080A adhesive tape
3M general-purpose double-sided tape for LED strips in standard indoor applications.
3M 9448A adhesive tape
3M double-sided tape with good initial adhesion for strips on smooth surfaces.
3M 9495LE adhesive tape
High-performance 3M double-sided tape with 300LSE adhesive; professional standard.
3M adhesive tape
High-performance double-sided tape (e.g., 3M VHB, 3M 9495LE) applied to the back of an LED strip for surface mounting.
4-channel amplifier
Amplifier for RGBW strips with four independent channels.
4-pin connector
For RGB strips; four contacts.
4-way connector
Connector for crossing to four LED strip outputs.
4-wire system
Four-wire system for RGB strips: one common and three color channels.
4-zone controller
LED controller managing 4 independent zones.
45-degree corner accessory
45-degree connector fitting for LED profiles.
5-channel amplifier
Amplifier for RGBCCT strips with five channels.
5-pin connector
For RGBW strips; five contacts.
5-wire system
Five-wire system for RGBW strips (common + R + G + B + W).
6-pin connector
For RGBCCT strips; six contacts.
8-channel controller
Eight-channel controller for complex multi-color LED installations.
8-scene controller
LED controller with 8 memorizable lighting scenes.
8-zone controller
LED controller managing 8 independent zones.
90-degree corner accessory
90-degree connector fitting for LED profiles.
90-degree corner connector
Connector for 90° joints between two LED strip sections.
ABS (Acrylonitrile Butadiene Styrene)
Thermoplastic polymer used for clips, end caps, and LED profile accessories.
Abrasion resistance
Capacity of a diffuser or profile to resist scratches and surface wear over time.
AC (Alternating Current)
Mains electricity (230V, 50 Hz); must be converted to DC for LED strips.
AC/DC conversion
Transformation of mains alternating current into direct current for LED strips.
Accelerated life test
Accelerated aging test used to predict the useful lifespan of LEDs.
Acceleration factor
Acceleration multiplier in LED aging tests for lifespan prediction.
Accelerometer (sensor)
Vibration sensor integrable into smart LED systems for impact or shock detection.
Acceptance angle
Maximum light input angle for an LED optical guide.
Acceptance angle (optics)
Maximum light input angle for an optical fiber or LED light guide.
Acceptance criteria
Quality control acceptance standards for LED products.
Acceptance test
Product acceptance testing upon LED delivery.
Accuracy class
Accuracy classification for LED photometric measuring instruments.
Acetate (filter)
Colored acetate sheet used as a filter for LED sources in theatrical applications.
Acid etching
Chemical surface treatment of aluminum for a matte finish.
Acid-resistant
LED profile material resistant to acids for chemical environments.
Acoustic comfort
Acoustic comfort of a space where the LED profile does not introduce noise.
Acoustic emission
Acoustic noise generated by an LED power supply; should be minimized.
Acoustic insulation
Acoustic insulation of an LED profile in noise-sensitive environments.
Acoustics (profile influence)
Effect of an LED profile on sound propagation in acoustically treated spaces.
Acquisition cost
Purchase cost of LED components for a project.
Acrylic (PMMA)
Transparent plastic material used for LED profile diffusers, with high light transmittance (~92%).
Active cooling
Active cooling of LEDs via fans; typically used only for high-power fixtures.
Active dimming
Dimming activated via light sensor feedback for continuous adjustment.
Active power
Active power absorbed by an LED system; measured in Watts.
Activity-based lighting
LED lighting that adapts to the specific activity performed in the space.
Actual power consumption
Actual measured power consumption of an LED system during operation.
Actuator
Device that executes a command received from an LED control system.
Adapter
Component enabling connection between connectors or electrical systems of different formats.
Adapter plate
Adapter plate for mounting LED profiles on non-standard supports.
Adaptive lighting
LED system that automatically adapts to environmental conditions and user preferences.
Adaptive outdoor lighting
Outdoor LED lighting that adjusts to traffic, weather conditions, and schedules.
Additive color mixing
Additive color synthesis obtained by overlapping red, green, and blue light to generate any color.
Additive manufacturing
3D printing of LED components: prototypes of profiles, lenses, brackets.
Address
Unique identifier on a communication bus (DMX, DALI).
Addressable IC controller
Controller with IC chip for driving addressable LED strips.
Adhesion promoter
Primer that improves double-sided tape adhesion on LED strip mounting surfaces.
Adhesion strength
Ability of double-sided tape to keep the strip securely fixed over time.
Adhesion strength test
Test measuring the adhesion resistance of an LED strip's double-sided tape.
Adhesion test
Test to verify the seal and adhesion of an LED strip's double-sided tape to a surface.
Adhesion to glass
Adhesion capability of an LED strip's double-sided tape to glass surfaces.
Adhesion to metal
Adhesion capability of an LED strip's double-sided tape to metal surfaces.
Adhesion to plastic
Adhesion capability of an LED strip's double-sided tape to plastic surfaces.
Adhesion to wood
Adhesion capability of an LED strip's double-sided tape to wood surfaces.
Adhesive backing
Adhesive backing on an LED strip with a protective liner to remove before mounting.
Adhesive bond strength
Bond strength between the LED strip adhesive and the mounting surface.
Adhesive compatibility
Compatibility of the adhesive with the mounting surface material.
Adhesive cure time
Polymerization time required for the adhesive to reach maximum strength.
Adhesive failure
Bond failure of an LED strip's adhesive causing detachment from the surface.
Adhesive liner
Protective film on the adhesive backing of an LED strip; removed prior to mounting.
Adhesive peel test
Peel test to verify the strength of an LED strip's adhesive.
Adhesive primer
Primer applied to the surface before mounting an LED strip to improve adhesion.
Adhesive shear test
Shear test to verify the resistance of an LED strip's adhesive.
Adhesive shelf life
Storage duration of an LED strip's adhesive before loss of efficacy.
Adhesive surface preparation
Surface preparation for adhesive LED strip mounting: cleaning and degreasing.
Adhesive tape removal
Removal of adhesive tape from an LED strip for replacement or repositioning.
Adhesive temperature range
Temperature range in which the LED strip adhesive maintains its efficacy.
Admittance
Reciprocal of impedance; an electrical parameter of LED circuits.
Adobe wall mounting
Mounting LED profiles on raw earth/adobe walls using specific anchors.
Advanced control
Advanced LED lighting control using sensors and automation.
Advanced dimming
Advanced dimming featuring logarithmic curves and deep dimming capabilities.
Advanced lighting control system
Advanced LED control system integrating sensors, DALI, and automation.
Advanced optic
Advanced optics for precise control of LED light distribution.
Aesthetic integration
Aesthetic integration of an LED profile into the architectural design of a space.
After-sales service
Post-sale support and maintenance service for LED systems.
Afterglow
Residual light emission after switching off; virtually absent in LEDs.
AGC (Automatic Gain Control)
Circuit for automatic gain adjustment in DMX receivers.
Aged LED performance
LED performance metrics after prolonged operation.
Ageing factor
LED depreciation factor used in lighting calculations.
Ageing mechanism
LED degradation mechanisms over time: phosphor decay, die aging, connection wear.
Ageing rate
Speed of LED ageing; influenced by temperature and drive current.
Ageing test result
Results from accelerated LED ageing tests.
Aging test
Accelerated ageing test on LEDs and power supplies to predict reliability.
AGi32
Professional 3D lighting calculation software for LED design.
AGi32 software
3D lighting calculation software for professional LED design.
Air conditioning load
Thermal load of LED fixtures on a building's air conditioning system.
Air gap
Air space between an LED strip and diffuser; influences light distribution.
Air gap thermal resistance
Thermal resistance of the air gap within an LED system.
Air handling unit
Air treatment unit where LED lighting contributes to the thermal load.
Air purification
UV-C LED systems for air purification in indoor environments.
Airflow simulation
Simulation of airflow around an LED profile for thermal optimization.
Airtight housing
Hermetic enclosure for LED power supplies in dusty environments.
Airtight seal
Hermetic sealing of an LED profile against air and dust ingress.
Aisle lighting
LED lighting for warehouse and supermarket aisles.
Alarm LED
Status LED indicating abnormal conditions in the system.
Alarm output
Alarm output from an LED driver for fault signaling.
Alarm panel LED
Alarm panel with LED indicators for event signaling.
Alarm relay
Relay that signals faults within an LED system.
Alarm signal
Alarm signal generated by an LED driver in case of anomaly.
Alarm threshold
Alarm threshold for temperature, current, or voltage in an LED system.
Albedo
Ratio of reflected to incident light on a surface; influences lighting calculations.
Alcove lighting
LED lighting for architectural alcoves and niches.
Alexa (Amazon)
Voice assistant compatible with Wi-Fi and Zigbee LED controllers.
Alexa compatibility
LED controller's ability to operate with Alexa voice assistant.
Alexa routine
Automated Alexa routine for LED lighting control.
Alexa skill
Dedicated Alexa skill for controlling LED lighting systems.
Algae-resistant
LED profile material resistant to algae growth in humid environments.
AlGaInP
Semiconductor material for high-brightness red, orange, and yellow LEDs.
Algorithm LED control
Control algorithm for LED automation and optimization.
Algorithm of mixing color
Software in an LED controller that calculates PWM values for RGB channels to achieve a target color.
Alignment bracket
Bracket for precise alignment and positioning of LED profiles.
Alignment guide
Guide for precise insertion of an LED strip into a profile.
Alignment mark
Reference mark on an LED strip for alignment during installation.
Alignment pin
Alignment pin in an LED profile for precise diffuser positioning.
Alignment tolerance
Permissible alignment tolerance during LED profile installation.
Alignment tool
Tool for aligning LED profiles during installation.
Alkali-resistant
LED profile material resistant to alkalis for chemical environments.
All-in-one fixture
LED fixture with integrated light source, driver, and optics.
All-weather LED
LED fixture designed to operate in all weather conditions.
Alley lighting
LED lighting for narrow alleys and passageways.
Allocation plan
Resource allocation plan for an LED project.
Allowable load
Maximum permissible load on an LED profile support.
Allowable temperature rise
Permissible temperature increase of an LED system during operation.
Alloy composition
Chemical composition of the aluminum alloy used in an LED profile.
Almost-monochromatic
LED with a very narrow emission spectrum; nearly monochromatic.
Almost-resonant converter
Near-resonant converter in an LED driver for high efficiency and low noise.
Almost-static test
Slow-variation parameter test used to characterize LED performance.
Alphanumeric display
LED alphanumeric display for information and messaging.
Alternate source
Alternative component supplier for LED supply chain resilience.
Alternating current (AC) input
AC input terminal on an LED power supply.
Alternating flash
Alternating flashing of two LED groups for signaling applications.
Alternative to traditional lighting
LED lighting as a replacement for halogen, fluorescent, and discharge lamps.
Altitude correction
Altitude correction factor for sizing LED power supplies.
Altitude derating
Power derating of an LED power supply at high altitudes.
Aluminum (profile)
Primary material for LED strip profiles; ensures thermal dissipation, rigidity, and aesthetic finish.
Aluminum 5083
Marine-grade corrosion-resistant aluminum alloy for coastal LED profiles.
Aluminum 6005A
Aluminum alloy for structural LED profiles with enhanced mechanical resistance.
Aluminum 6060
Al-Mg-Si alloy for LED profile extrusion; optimal balance of workability and strength.
Aluminum 6082
High-strength aluminum alloy for walkable LED profiles.
Aluminum alloy grade
Grade classification of aluminum alloy used in LED profiles: 6060, 6063, 6005.
Aluminum anodized
Aluminum treated with anodic oxidation to increase corrosion resistance and provide colored finishes.
Aluminum anodized bronze
Bronze anodized finish for integration with classic or rustic furnishings.
Aluminum anodized gold
Gold anodized finish for luxury decorative applications.
Aluminum brushed
Mechanically brushed finish with directional texture; industrial aesthetic.
Aluminum channel
Aluminum channel for housing LED strips; synonymous with profile.
Aluminum die-cast
Aluminum formed via die casting; used for heat sinks and fixture housings.
Aluminum extruded
LED profile manufactured via extrusion through a shaped die.
Aluminum extrusion die
Extrusion die used in the production of aluminum LED profiles.
Aluminum extrusion process
Aluminum extrusion manufacturing process for LED profiles.
Aluminum extrusion tolerance
Dimensional tolerances for aluminum extruded LED profiles.
Aluminum fin
Aluminum fin on an LED profile for thermal dissipation.
Aluminum grade selection
Selection of aluminum alloy for an LED profile based on application requirements.
Aluminum heat sink profile
LED profile primarily designed for thermal dissipation in aluminum.
Aluminum mounting channel
Aluminum mounting channel for LED strips.
Aluminum oxide layer
Aluminum oxide layer produced by anodizing an LED profile.
Aluminum powder-coated
LED profile with thermoset powder coating for maximum durability.
Aluminum recycled
Recycled aluminum used for sustainable LED profiles.
Aluminum series 3000
Al-Mn alloy for corrosion-resistant LED components.
Aluminum series 5000
Al-Mg alloy for LED profiles in marine environments.
Aluminum series 6000
Al-Mg-Si alloy for LED profile extrusion; the most widely used series.
Aluminum series 7000
Al-Zn high-strength alloy for structural LED profiles.
Aluminum surface treatment
LED profile surface treatment: anodizing, powder coating, brushing.
Aluminum thermal conductivity
Thermal conductivity of LED profile aluminum: 150-200 W/mK.
Aluminum weight per meter
Linear meter weight of an aluminum LED profile.
Aluminum white powder-coated
White powder coating; maximizes internal light reflection in the profile.
Amber LED
LED emitting amber light (590-600 nm), used for warm decorative lighting or signage.
Ambilight
Perimeter backlighting for screens; principle also applied in architectural lighting.
Amorphous silicon
Amorphous silicon; used in solar cells for off-grid LED systems.
Amperage
Electrical current intensity measured in Amperes (A); fundamental parameter for sizing cables and power supplies.
Ampere-hour (Ah)
Unit of capacity for emergency LED batteries.
Ammeter
Instrument for measuring current intensity in an LED circuit.
Amphitheater lighting
LED lighting for amphitheaters and open-air performance spaces.
Analog control
Brightness management via continuous analog signal (0-10V, 1-10V).
Analog vs digital
Comparison between analog dimming systems (0-10V) and digital (DALI, DMX).
Analog-digital converter
Circuit that converts an analog signal (0-10V) into digital for an LED controller.
Angle of incidence
Angle between a light ray and the perpendicular to the surface.
Angle of incidence of light
Angle at which an LED beam strikes a target surface.
Angle of reflection
Angle of the reflected ray; equal to the angle of incidence.
Annual consumption
Total energy consumed by the LED system per year; in kWh.
Anode
Positive terminal of an LED; on a strip, connected to the positive power supply line (+).
Anodizing hard
Anodic treatment with a thick layer; used for aggressive environments.
Anodizing type II
Standard anodizing for LED profiles; layer thickness 5-25 micrometers.
Anodizing type III
Hard anodizing with layer thickness exceeding 25 micrometers; maximum resistance.
ANSI binning
American National Standards Institute standard used to classify LEDs by chromatic shade.
Anti-condensation
Treatment that prevents condensation formation on LED diffusers.
Anti-condensation accessory
Component that prevents condensation formation inside the LED profile.
Anti-corrosion
Protective treatment against corrosion for LED profiles in marine environments.
Anti-flicker
Technology that eliminates perceptible LED light flickering, crucial for workplaces and video recording.
Anti-glare
Optical treatment or profile design that reduces glare from the LED source.
Anti-microbial LED
LED strip with antibacterial coating for healthcare environments.
Anti-reflection (treatment)
Optical coating that reduces reflections on the surface of an LED diffuser.
Anti-slip diffuser
Diffuser with an anti-slip surface for walkable LED profiles.
Anti-tampering
Safety system that prevents tampering with an LED fixture.
Anti-UV additive
Chemical compound in PMMA or PC diffusers that prevents yellowing from UV exposure.
Anti-vandal LED
LED fixture with IK10 protection against vandalism.
Anti-yellowing
Diffuser treatment to prevent yellowing over time due to heat and UV exposure.
APA102
Addressable RGB LED chip with two-wire SPI protocol; fast update rate.
APA107
Evolution of the APA102 with improved PWM management and lower power consumption.
APE classification
Classification of outdoor environments per EN 13201 standard for LED street lighting.
Apple Home
Apple application for controlling HomeKit-compatible LED devices.
Apple HomeKit
Apple smart home platform for voice-controlled LED lighting via Siri.
Application
Procedure for applying adhesive tape to the back of an LED strip.
Arc lamp
Gas discharge light source; LED strips replace them in many applications due to efficiency and lifespan.
Arc suppressor
Electrical arc suppressor for LED system relays.
Architectural application
Use of LED systems to highlight architectural elements such as cornices, niches, vaults, and facades.
Archway lighting
LED lighting for arches and covered walkways.
Area under spectral curves
Integral of the LED emission spectrum; proportional to radiant flux.
Armature
Traditional term for a lighting fixture housing; now typically equipped with an LED source.
Art-Net
Ethernet-based protocol for transmitting DMX512 data over IP networks; used in complex LED installations.
Art-Net controller
LED controller compatible with Art-Net protocol over Ethernet.
Assembly
Hand assembly of LED components; used for prototypes and small batches.
Assembly
Machine that positions LED chips on a PCB prior to soldering.
Assembly
Automated LED strip assembly using pick-and-place robots.
Assembly
Mounting process of LED chips onto the surface of a printed circuit board (PCB) via reflow soldering.
Assembly
Through-hole mounting; rarely used in modern LED strips.
Atrium lighting
LED lighting for building atriums; suspended profiles and lighting scenarios.
Attenuation
Controlled reduction of luminous intensity via dimmer or current adjustment.
Audio-reactive controller
LED controller synchronizing effects to music.
Audio-reactive LED
Addressable LED strips that respond to music via microphone and controller.
Auditorium lighting
LED lighting for auditoriums; multiple scenarios and dimming capabilities.
Auto-addressing
Automatic address assignment for LED network devices.
Autodesk Revit (BIM)
BIM software with plugins for LED lighting design.
Automotive application
LED vehicle lighting using specific automotive-grade strips.
AWG (American Wire Gauge)
Standardized system for electrical conductor sizing; typically 18-22 AWG used in LED installations.
AWG 18 cable
Cross-section 0.82 mm²; for LED runs up to 5 m.
AWG 20 cable
Cross-section 0.52 mm²; for short runs.
AWG 22 cable
Cross-section 0.33 mm²; for signals and very short runs.
Azimuthal angle
Horizontal rotation angle for aiming an LED fixture.
↑ Back to top
B
Baby spot LEDSmall projector LED for accent lighting.
Back-EMF
Back electromotive force generated by inductive loads; can interfere with LED driver.
Back-up power
Emergency power supply for maintaining the LED lighting.
Backbone (wiring)
Main distribution cable in complex LED installations.
Backlight (backlighting)
Technique of lighting from behind a panel or translucent surface using LED strips or modules.
Backlight for signs
LED strip for backlighting signs and illuminated signs.
Backlighting
Light from behind a translucent panel.
Backlighting counter
LED strip behind counters for a luminous effect on the wall.
Backlighting display
LED strip behind displays and screens for bias lighting.
Backlighting furniture
LED strip behind furniture for a floating effect and decorative lighting.
Backlighting headboard
LED strip behind the headboard of the bed for ambient effect.
Backlighting mirror
LED strip behind the mirror for diffuse facial lighting.
Backlighting panel
LED strip behind translucent panels for uniform backlighting.
Backlighting TV
LED strip behind the TV for bias lighting and visual comfort.
Backplate
Rear mounting plate for fixing wall- or ceiling-mounted LED fixtures.
BACnet
Building automation protocol compatible with LED lighting systems.
Badge reader (for LED)
Badge reader that activates customized LED scenarios based on user input.
Baffle
Profile-integrated screen that reduces glare.
Baffle angle
Angle of the shield integrated into the LED profile for glare control.
Baffle cut-off
Cut-off angle of the anti-glare shield in the LED profile.
Baffle design
Design of the shield integrated into the LED profile for visual comfort.
Baffle material
Shielding material: black aluminum, matte plastic, technical fabric.
Bag sealing LED
UV LED for sealing packaging in the food-grade industry.
Balance point
Thermal equilibrium point of the LED system: heat generated = heat dissipated.
Balanced white
Balanced white achieved through precise mixing of warm and cool LEDs.
Balanced wiring
Balanced wiring for interference-free LED signals.
Balcony LED lighting
LED lighting for balconies and loggias; IP44 and warm CCT.
Ball lens
Spherical microlens for collimating LED light in specialized optical applications.
Ballast
Ballast for discharge lamps; in LED retrofits, it is bypassed or replaced.
Ballast bypass
Removal or deactivation of the fluorescent ballast for installing direct LED tubes.
Ballast compatible
LED tube compatible with existing fluorescent ballast; simplified retrofit.
Ballroom LED lighting
LED lighting for ballrooms; dynamic scenes and dimming.
Balustrade illuminated
Railing or parapet with integrated LED strip for decorative lighting.
Balustrade LED
LED lighting integrated into balustrades for safety and decoration.
Band gap
Energy range in the semiconductor; determines the wavelength.
Band gap energy
Band gap energy of the LED semiconductor; determines the emitted color.
Band gap wavelength
Wavelength corresponding to the LED’s band gap energy.
Band-pass filter
Optical filter that transmits only a specific range of wavelengths.
Bandwidth (controller)
Bandwidth of the LED controller for transmitting control data.
Banister (lighting)
LED lighting integrated in the banister for safety and decoration.
Banner LED
Luminous LED strip for advertising and promotional banners.
Bar counter LED
LED lighting for bar counters; chromatic effects and dimming.
Bar counter LED lighting
Under and behind counter LED lighting for decorative effects.
Bar graph indicator
LED bar graph indicator for visualizing levels and progress.
Bar light fixture
Linear bar LED fixture for linear lighting.
Bar mount
Bar support for mounting multiple LED fixtures in a row.
Bare PCB
Printed circuit board without mounted components; the base for producing LED strips.
Bare wire connection
Connection using bare wire to the terminals of the LED power supply.
Bargain LED lighting
Economical LED lighting for basic applications.
Barn door (accessory)
Adjustable barn doors attached to an LED projector to control the beam.
Barrier cream
Protective cream for hands when handling LED strips.
Barrier layer
Barrier layer in the LED strip’s PCB for insulation and protection.
Barrier material
Barrier material against moisture and gases for LED protection.
Barrier strip
Terminal block with insulating barriers between contacts for electrical safety.
Barrier strip connector
Terminal block with insulating barriers for safe LED connections.
Barrier tape
Barrier tape for marking work areas during LED installation.
Base assembly
Assembly of the LED fixture’s mounting base.
Base bracket
Base bracket for mounting the LED fixture.
Base cap connector
Connector with cap at the base of the LED fixture.
Base color temperature
Base CCT of the LED strip before adjustment.
Base current
Base current of the LED circuit without dimming.
Base dimension
Base dimensions of the LED fixture for mounting.
Base layer (PCB)
Base layer of the LED strip’s PCB.
Base load
Base load of the LED system with minimum lighting activated.
Base mounting hole
Mounting hole in the base of the LED fixture for screw fixation.
Base PCB
Flexible (FPCB) or rigid printed circuit board on which LED chips and resistors are soldered.
Base plate
Aluminum base plate for thermal dissipation of high-power LED modules.
Base plate aluminum
Aluminum base plate for LED thermal dissipation.
Base temperature (Tb)
Temperature measured at the base of the LED package; for calculating useful lifetime.
Base voltage
Base voltage of the LED circuit before adjustment.
Baseboard LED
LED lighting integrated into the baseboard for step marking.
Baseline measurement
Reference measurement of LED performance before installation.
Basement LED lighting
LED lighting for basements and cellars; high uniformity.
Basic dimming
Basic dimming with simple on/off/dim adjustment.
Basic lighting design
Basic LED lighting design project for standard applications.
Basilica LED
LED lighting for basilicas and historic churches; discreet integration.
Batch consistency
Consistency of characteristics across different production batches of LED strips.
Bathroom cabinet LED
LED lighting for bathroom cabinets with door sensors.
Bathroom ceiling LED
Ceiling-mounted LED lighting for bathrooms; IP44 rated and high CRI.
Bathroom dimmer
Bathroom dimmer compatible with LED and compliant with regulations for humid environments.
Bathroom exhaust LED
Extraction fan with integrated LED light for bathrooms.
Bathroom IP44 LED
LED fixture with IP44 protection for bathroom zones.
Bathroom LED strip
IP44 or IP65 LED strip for bathroom lighting.
Bathroom mirror profile
LED profile specifically for perimeter lighting of bathroom mirrors.
Bathroom recessed LED
IP44-rated LED downlight for recessed installation in bathroom ceilings.
Bathroom wall light
IP44-rated LED wall light for bathrooms.
Battery backup
Backup battery for emergency operation of the LED.
Battery backup duration
Duration of battery-powered operation for emergency LED.
Battery backup module
Additional battery module for emergency LED.
Battery capacity
Capacity of the emergency LED battery; in mAh.
Battery charge circuit
Battery charging circuit in the emergency LED module.
Battery charge time
Full recharge time of the emergency LED battery; typically 24 hours.
Battery charger (LED)
Battery charging circuit integrated into the emergency LED module.
Battery compartment
Battery compartment in the emergency LED module.
Battery condition indicator
LED indicator showing the status of the emergency battery.
Battery disposal
Proper disposal of depleted batteries from emergency LED modules.
Battery life cycle
Number of charge/discharge cycles of the emergency LED battery.
Battery monitoring system
Monitoring system for the status of emergency LED batteries.
Battery pack replacement
Replacement of the battery pack in the emergency LED module.
Battery rating
Rating of the emergency LED battery: voltage, capacity, type.
Battery self-discharge
Self-discharge of the emergency LED battery over time.
Battery status indicator
LED indicator of the emergency battery’s state of charge.
Battery temperature range
Operating temperature range of the emergency LED battery.
Battery test button
Button for manually testing the emergency LED battery.
Battery test interval
Interval between periodic tests of the emergency LED battery.
Battery test procedure
Procedure for testing the emergency LED battery.
Battery type selection
Selection of battery type for the emergency LED module: NiMH, LiFePO4.
Battery voltage
Voltage of the emergency LED battery; typically 3.6V or 7.2V.
Bay light
LED fixture for illuminating large industrial or commercial areas.
Bay window LED
LED lighting for bow windows and bay windows.
Beacon LED
Flashing LED device for signaling and safety.
Beam angle
See "Beam angle". Angle of the luminous cone at 50% of peak intensity.
Beam architecture
Shape and distribution of the light cone emitted by an LED fixture.
Beam pattern
Pattern of the luminous beam projected by the LED onto a surface.
Beam shaping
Shaping of the LED beam using lenses, reflectors, or masks.
Beam spread
Spread of the light distribution; similar to beam angle but considering the full field.
Beam wall
Wall of light created by adjacent narrow-beam LED strips.
Before switching on LED
Initial test of the LED system after installation to verify operation.
Bellmouth (profile)
LED profile with flared end for easier cable insertion.
Belt light
Luminous LED chain with mounts for decorative lamps at regular intervals.
Belvedere LED
LED lighting for belvederes and panoramic terraces.
Benchmark test
Comparative performance test of different LED products.
Bend radius
Minimum bending radius for LED strip or flexible neon.
Benefits of LED lighting
Overall advantages of LED: energy savings, longevity, quality, flexibility.
Best practices
Best practices for designing and installing LED systems.
Beta test
Field testing phase of a new LED product before market launch.
Bi-color LED
LED with two differently colored dies in the same package; for indicators.
Bi-emission profile
LED profile emitting light both downward and sideways.
Bi-level dimming
Two-level dimming: full brightness and reduced level (e.g., 50%).
Bi-pin connector
Two-pin connector for LED tubes and pin-based lamps.
Bid specification
Tender specifications for public LED system procurement.
Bifurcation
Splitting of an LED power supply cable into two branches.
BIM (Building Information Modeling)
Integration of LED lighting into the building’s BIM model.
Bimorph actuator
Piezoelectric actuator for controlling adjustable LED optics.
Bin code
Alphanumeric code identifying the binning group of an LED batch.
Binning
Process of selecting and classifying LED chips for uniformity of color, brightness, and voltage.
Biological darkness
Nighttime lighting condition that does not interfere with circadian rhythm.
Biophilic design
Design integrating natural elements, including LED lighting that mimics natural light.
Bird-safe lighting
Outdoor LED lighting designed to minimize attraction to migratory birds.
Bit depth
Dimming signal resolution; 8-bit = 256 levels, 16-bit = 65,536 levels.
Bit rate
Data transmission speed in an LED protocol (DMX = 250 kbit/s).
Black body locus
Curve of blackbody radiator colors in the CIE diagram.
Black light LED
UV-A LED (365–395 nm) for fluorescent effects.
Blanking interval
Interval between frames in an addressable LED controller.
Blaze angle
Blaze angle in a diffraction grating; for specialized LED optics.
Bleed (light leakage)
Undesired light leakage from profile edges.
Blind spot
Unlit area in an LED system; to be eliminated in the design.
Blink pattern
Programmable flash pattern for signaling LEDs.
Block diagram
Block diagram of the LED system showing component connections.
Blow-out panel
Pressure relief panel in outdoor LED fixtures to compensate for pressure changes.
Blue hazard
Photobiological risk from the blue component of white LEDs.
Blue LED
Blue LED (450-475 nm); basis of white LED technology.
Bluetooth Low Energy (BLE)
Low-power Bluetooth for LED controllers and proximity sensors.
Bluetooth Mesh
Bluetooth-based wireless protocol for controlling distributed LED networks without a dedicated gateway.
BMS (Building Management System)
Centralized building management system (BMS), including LED lighting.
Board-to-board connector
Connector for linking two adjacent LED PCBs.
Board-to-wire connector
Connector for linking an LED PCB to a cable.
Boat LED
LED lighting for boats; resistant to saltwater corrosion.
Body (fixture)
Main body of an LED fixture housing the light source and optics.
Body color
Color of the LED package body; white or black; affects internal reflection.
Bollard LED
Outdoor luminous bollard with LED source for pathways and gardens.
Bolt mount
Mounting of the LED profile using through-bolts.
Boltzmann constant
Physical constant linking temperature and energy; relevant for LED noise.
Bonding wire
Thin gold or aluminum wire connecting the LED die to the package terminals.
Boosted efficiency
Enhanced LED efficiency through optimized chip and package design.
Booster
Power amplifier for additional LED strips.
Boot loader
Base firmware in the controller for software updates.
Bore (hole)
Hole drilled in the ceiling or surface for installing an LED downlight.
Bottom-emitting LED
LED emitting from its bottom face.
Bow window LED
LED lighting for bow windows and bay windows.
Box driver
Enclosure for concealing the LED power supply in the installation.
Box power supply
Enclosure for hiding LED power supplies.
Box section profile
LED profile with hollow rectangular cross-section for structural applications.
Bracket
Metal bracket or support for wall- or ceiling-mounting LED profiles.
Bracket
Metal support for mounting profiles and LED fixtures on walls, ceilings, or other structures.
Braided cable
Braided-sheath cable for mechanical protection and retro aesthetics.
Branch circuit
Branch circuit from the electrical panel dedicated to powering LED fixtures.
Brand reliability
Recognized LED product brand known for quality and support.
Breakaway tab
Pre-scored tab on the LED strip to facilitate separation at cut points.
Breathable membrane
Breathable membrane in IP65 LED fixtures that equalizes internal pressure.
Bridge LED
LED lighting for bridges and viaducts.
Bridge rectifier
4-diode bridge rectifier for AC-DC conversion in the LED power supply.
Bridge rectifier LED
Bridge rectifier in the LED driver for AC-DC conversion.
Bridge zip
Gateway connecting Zigbee LED devices to the home Wi-Fi network.
Bridgelux
American manufacturer of high-efficiency LED chips, used in professional LED strips.
Bridgelux Thrive
Bridgelux Thrive series with natural spectrum for indoor LED.
Bridgelux Vesta
Bridgelux Vesta series of high-efficiency LED chips for professional strips.
Brightness
Subjective perception of light quantity; not necessarily matching the measured luminous flux.
Brightness adjustment
Ability to adjust the intensity of the LED strip using a dimmer.
Brightness level
Set brightness level; expressed as a percentage or in lux.
Brightness of the LED profile
Luminous flux exiting the LED profile after diffuser losses.
Brightness of the LED strip
Luminous flux emitted by the LED strip; in lumens per meter.
Brightness uniformity
Uniformity of perceived brightness across the entire LED diffuser surface.
Brilliance
Subjective perception of the brightness of a light source or illuminated surface.
Brilliance of the diffuser
Perceived luminance on the LED diffuser surface.
Broad spectrum LED
LED with broad spectrum for high color rendering.
Brochure
Marketing material presenting LED products.
Brownout
Temporary reduction in mains voltage; quality LED drivers compensate for this.
BTF (Behind the Furniture)
LED installation behind furniture for a floating light effect.
Buck converter
Step-down DC-DC converter; common topology in constant-current LED drivers.
Buck-boost converter
DC-DC converter capable of both stepping down and stepping up voltage for LED drivers.
Buckling
Mechanical deformation of the profile or PCB due to thermal expansion; prevented using expansion joints.
Budget
Available budget for the LED project.
Budget lighting design
Available financial budget for the LED lighting project.
Buffer (circuit)
Circuit that isolates and protects the LED control signal.
Buffer battery
Buffer battery for brief mains interruptions.
Building automation
Building automation including LED lighting via KNX, BACnet, DALI.
Built-in emergency
Emergency function integrated into the LED fixture; with internal battery.
Built-in sensor
Sensor integrated into the LED fixture body.
Bulk capacitor
High-capacity capacitor in the LED driver for filtering and energy reserve.
Bunker light
Robust, compact LED fixture for harsh environments; turtle-type.
Burn-in
Extended burn-in testing phase to ensure long-term LED stability and reliability.
Burn-in hours
Number of hours of initial burn-in testing to stabilize LED performance.
Bus bar
Conductive busbar for current distribution in large LED installations.
Bus communication
Physical line for LED control data.
Bus topology
Network topology where LED devices are connected to a single bus (e.g., DALI).
Bushing
Insulating bushing for cable passage through holes in metal parts.
Bushing (threaded insert)
Threaded brass or steel insert integrated into LED profiles for screw fastening.
Butterfly beam
LED light distribution with two lateral lobes; batwing type.
Bypass capacitor
Decoupling capacitor placed near the LED chip.
Bypass diode
Diode that bypasses a failed LED in a series string. ↑ Back to top
C
C-clampC-shaped terminal for the temporary mounting of LED fixtures on trusses and structures.
Cabin lighting
LED lighting for cabins in aircraft, trains, and ships.
Cabinet lighting
Indoor LED lighting for cupboards, display cases, and storage furniture.
Cabinet lighting
LED lighting for cabinet interiors with door sensor and high CRI.
Cabinet illuminated
Cabinet with integrated LED strip for enhanced visibility of contents.
Cable cleat
Metal clip for safely securing LED cables in ducts or trunking.
Cable entry
Cable entry point in the LED fixture; protected by a cable gland.
Cable gland
Threaded fitting for watertight cable passage through IP-rated enclosures.
Cable management
Organized routing and securing of cables within the LED system for aesthetics and safety.
Cable marker
Identification label applied to LED cables to facilitate maintenance.
Cable tie
Nylon zip tie for bundling LED cables.
Cable tray
Structural support for routing LED power supply cables.
CAD model
Three-dimensional model of the LED profile for computer-aided architectural design.
CADR (Constant Average LED Density Requirement)
Requirement for constant average luminous density in a lighting design project.
Cage clamp
Spring-loaded terminal for quick and secure connection of LED cables.
Calculation automatic
Lighting calculation performed automatically by LED design software.
Calculation automatic profile
Software that automatically calculates the number of LED profiles required.
Calculation automatic strip
Software that automatically calculates the required meters of LED strip.
Calculation cable sizing
Determination of the appropriate cable cross-section for LED power supply.
Calculation clip quantity
Determination of the number of mounting clips required for the LED profile.
Calculation connector quantity
Determination of how many connectors are needed for LED junctions.
Calculation energy
Calculation of the annual energy consumption of the LED system.
Calculation harmonic
Analysis of current harmonics generated by the LED power supply.
Calculation illuminance
Quick estimation of LED illuminance for preliminary assessment.
Calculation inrush current
Estimation of the current surge at power-up of LED drivers.
Calculation light point
Determination of the number of LED fixtures required for the project.
Calculation load
Determination of total power required to properly size the power supply.
Calculation LPD
Calculation of LED power density per square meter.
Calculation maximum length
Determination of the maximum connectable length of LED strip.
Calculation minimum cable section
Determination of the minimum cable cross-section required for LED power supply.
Calculation profile quantity
Determination of how many profiles are needed for the LED project.
Calculation profile temperature
Estimation of the LED profile temperature based on dissipated power.
Calculation simplified
Quick estimation of LED photometric parameters for initial evaluation.
Calculation spacing
Determination of the optimal distance between two adjacent LED fixtures.
Calculation strip quantity
Determination of the required LED strip meters for the project.
Calculation supply margin
Sizing of the LED driver with a 20% safety margin.
Calculation supply quantity
Determination of how many power supplies are required for the LED system.
Calculation total current
Sum of currents drawn by all LED strips in the system.
Calculation total flux
Sum of the luminous flux of all LED strips in the system.
Calculation total power
Sum of the power ratings of all LED fixtures in the system.
Calculation UGR
Calculation of the Unified Glare Rating (UGR) for the LED fixture in a specific position.
Calculation verification
Post-installation verification of the LED lighting design using specialized software.
Calculation voltage drop
Calculation of voltage reduction along the LED strip for proper sizing.
Calculation voltage drop percentage
Determination of the percentage voltage drop along the LED strip.
CalcuLuX
Signify software for lighting calculation of LED fixtures.
Calendar luminous
Annual programming of LED lighting with seasonal scenarios.
Calibrated driver
LED driver with factory-calibrated output for precise current and voltage control.
Calibration
Adjustment of LED intensity to achieve optimal levels in the environment.
Calibration
End-of-line adjustment procedure to ensure chromatic uniformity across multiple strips or fixtures.
Calibration certificate
Certificate for the calibration of LED photometric measuring instruments.
Calibration factory
Calibration of chromatic and luminous parameters during production.
Calibration of spectrometer
Calibration of the spectrometer using a reference lamp for accurate LED measurements.
Calibration white point
Precise adjustment of the white point of LED strips for chromatic consistency.
Cam lock
Cam-based closure mechanism for securing covers and panels on LED fixtures.
Candle wax effect
LED effect simulating the flickering, warm light of a candle.
Candlelight (2000K)
CCT simulating the light of a candle.
Cantilever mount
Overhanging mounting method for an LED profile extending from the support surface.
Cap protective
Cover for unused LED connectors; protects against dust and humidity.
Capacitive proximity sensor
Capacitive sensor that detects the proximity of a body to activate LEDs.
Capacitive touch dimmer
Dimmer with capacitive touch surface for adjustment by touch.
Capacitor
Component in power supply circuits to filter ripple and stabilize voltage.
Capacitor bulk
High-capacity capacitor in the LED driver for filtering and energy reserve.
Capacitor ceramic
MLCC ceramic capacitor used in LED filtering circuits.
Capacitor electrolytic
High-capacity capacitor in LED drivers for filtering and energy reserve.
Capacitor film
Film capacitor for high-frequency filtering in LED drivers.
Capacitor parasitic
Unwanted capacitance in LED circuits that causes oscillations and interference.
Capacity thermal
Amount of heat a material can absorb; aluminum profiles have high thermal capacity.
Capping
Terminal cap or cover applied to the end of an LED profile for a clean finish.
Carbon footprint (LED)
Carbon footprint of LED lighting over its lifecycle; significantly lower than traditional sources.
Cardinal direction lighting
LED lighting oriented according to cardinal points; for outdoor and landscape applications.
Carport LED lighting
LED lighting for car canopies and carports.
Carrier frequency
Carrier frequency of the wireless signal for LED control.
Carrier frequency (controller)
Carrier frequency of the wireless signal for LED control.
Cascading (Controllers)
Daisy-chaining of LED controllers for large-scale installations.
Case temperature (Tc)
Temperature on the surface of the driver; used for derating calculations.
Casino LED lighting
LED lighting for gaming rooms and casinos; effects and atmospheric lighting.
Cast acrylic
Optical-grade cast PMMA for premium LED diffusers.
Catalog
Collection of all manufacturer LED products with technical specifications.
Catalog digital
Downloadable electronic version of the LED product catalog.
Catalog electronic
Digital catalog of LED products with specifications and images.
Catalog LED profiles
Collection of all available LED profile models with dimensions.
Catalog LED strips
Collection of all available LED strips with technical specifications.
Catalog lighting design
Collection of LED products with photometric data for project planning.
Catalog online
Web-accessible digital version of the LED product catalog.
Catenary mount
Mounting of LED profiles on tensioned cables between two anchor points.
Cathode
Negative terminal of the LED; on the strip, connected to the negative (-) power line.
Cathode ray oscilloscope
Oscilloscope for visualizing PWM and DMX signals in the LED system.
Cathodoluminescence
Light emission caused by electron bombardment; not used in LED technology.
CCR (Constant Current Reduction)
Dimming method by reducing direct current to the LED.
CCT (Correlated Color Temperature)
Correlated color temperature, expressed in Kelvin (K); indicates whether the light is warm or cool.
CCT 2200K
Color temperature of 2200K; very warm for specialized LED applications.
CCT 2400K
Color temperature of 2400K; warm for LED applications.
CCT 2700K
Color temperature of 2700K; warm for residential and hospitality LED applications.
CCT 3000K
Color temperature of 3000K; warm for versatile LED applications.
CCT 3500K
Color temperature of 3500K; neutral for multifunctional LED applications.
CCT 4000K
Color temperature of 4000K; neutral for offices and work environments.
CCT 4500K
Color temperature of 4500K; neutral for LED applications.
CCT 5000K
Color temperature of 5000K; cool for commercial and industrial LED applications.
CCT 5700K
Color temperature of 5700K; cool daylight for LED applications.
CCT 6500K
Color temperature of 6500K; cool for technical and inspection LED applications.
CCT accuracy
Precision of the LED strip's color temperature compared to the declared value.
CCT amplifier
Two-channel amplifier for dynamic white strips over long runs.
CCT preset
Strip with a fixed color temperature selected during production.
CCT range
Available CCT range for tunable white strips.
CCT tunable (Dynamic White)
LED strip with two LED rows (warm + cool) that allow color temperature variation.
CE LED classification
CE marking certifying LED product compliance with EU directives.
CE marking
Declaration of compliance with the essential requirements of European safety directives.
Ceiling acoustic
Ceiling-mounted acoustic panel with integrated LED lighting.
Ceiling grid
Suspended ceiling grid in which LED panels and profiles are integrated.
Ceiling light cove
Recess in the ceiling for LED strip with indirect lighting.
Ceiling luminous
Ceiling fully illuminated with diffused LED strips or panels.
Ceiling recess
Recess in the ceiling prepared to house an LED profile.
Ceiling slot
Linear groove in the ceiling for recessed LED profiles.
Ceiling-mounted anchor accessory
Anchor point for suspending LED profiles.
Cell (Battery)
Single battery cell within an LED emergency lighting module.
Center beam candlepower (CBCP)
Luminous intensity at the exact center of the LED beam; measured in candelas.
Centerpiece luminous
Decorative element with integrated LED strip for table lighting.
Central control panel
Central panel for managing all LED zones in a building.
Centralized control
Management of all LED light points from a central panel or software.
Ceramic alumina
Aluminum oxide ceramic substrate for high-dissipation LED PCBs.
Ceramic aluminum nitride
AlN ceramic substrate with excellent thermal conductivity for power LEDs.
Certificate of compliance
Document attesting that the LED product meets regulatory standards.
Certificate of origin
Document certifying the country of production of the LED product.
Certificate of testing
Document confirming the successful completion of LED system tests.
Certificate of warranty
Document specifying the warranty terms for the LED product.
Certification ATEX
Certification for LED fixtures used in potentially explosive atmospheres.
Certification CB
International certification scheme for electrical product safety.
Certification Energy Star
US energy efficiency certification for LED fixtures.
Certification ETL
Alternative to UL certification for the North American market.
Certification IFS
Certification for LED lighting in the food-grade industry.
Certification LED product
CE, UL, ENEC marks attesting product compliance.
Certification LED quality
Attestation of the manufacturer's quality management system (ISO 9001).
Certification UL
Safety certification for the North American market.
Chain pendant
LED profile suspended via decorative chain.
Chain suspension accessory
Kit with chains for suspending LED profiles.
Chamfer
Beveled edge on the LED profile for aesthetic integration and safety.
Change of LED scene
Transition from one lighting scenario to another in the LED system.
Change of LED strip
Procedure for replacing the LED strip in an existing profile.
Change of color temperature
Variation of CCT in a tunable white LED strip via controller.
Change of diffuser
Procedure for replacing the diffuser in an LED profile.
Change of LED color
Variation of emitted color from an RGB LED strip via controller.
Change of power supply
Procedure for replacing a faulty LED driver.
Change-over switch
Switch that allows alternating between two LED sources or power supplies.
Channel (Profile)
Common term for the aluminum profile that houses the LED strip and diffuser.
Channel blue
LED controller channel dedicated to the blue chip in RGB strips.
Channel cool white
LED controller channel dedicated to cool white chips in CCT strips.
Channel distribution
Commercial pathway from LED manufacturer to end customer.
Channel DMX
Single address (1-512) within a DMX universe; each LED function occupies one or more channels.
Channel fader
Linear slider on a DMX mixer for controlling a single LED channel.
Channel green
LED controller channel dedicated to the green chip in RGB strips.
Channel isolation
Electrical insulation between channels of a multi-channel LED controller.
Channel mapping
Assignment of DMX/DALI channels to each fixture's functions.
Channel of communication
Physical or wireless medium for transmitting LED control signals.
Channel of sale
Medium through which the LED product reaches the end customer.
Channel red
LED controller channel dedicated to the red chip in RGB strips.
Channel ventilation
Opening in the LED profile for airflow and heat dissipation.
Channel warm white
LED controller channel dedicated to warm white chips in CCT strips.
Channelled ceiling
Ceiling with preformed channels for inserting LED profiles.
Chapel LED lighting
LED lighting for chapels and places of worship.
Characteristic electrical
Electrical parameters of the LED strip: voltage, current, power per meter.
Characteristic I-V
Current-voltage curve of the LED; used for driver sizing.
Characteristic mechanical of the profile
Dimensions, weight, material, and structural resistance of the LED profile.
Characteristic photometric of the LED
Optical parameters of the LED product: flux, CRI, CCT, beam angle, distribution.
Characteristic thermal of the LED
Thermal parameters: thermal resistance, max Tj, operating temperature.
Chase effect
Lighting effect where LEDs illuminate sequentially to create a chasing motion.
Check valve (IP)
Pressure equalization valve in IP-rated LED fixtures that prevents water ingress.
Checklist installation
Verification list for correct completion of an LED installation.
Chemical resistance
Resistance of LED profile materials to chemical agents and cleaning detergents.
Chip array
Arrangement of multiple LED chips in a single package for high brightness.
Chip bin
Classification container for LED chips during the binning process.
Chip bonding pad
Contact area on the LED die for wire bonding connections.
Chip carrier
Substrate of the LED package that supports and connects the die.
Chip efficiency
Efficiency of a single LED chip before system-level losses.
Chip on Board (COB)
Technology where LED dies are mounted directly on the substrate and covered with a single phosphor layer for uniform light.
Chip scale package (CSP)
Ultra-compact LED chip where package dimensions closely match the die size.
Chip sorting
Selection and separation of LED chips into performance categories.
Choke coil
Filter inductor in the LED power supply to reduce EMI noise.
Chord length
Length of the chord of a curved LED profile; used for radius of curvature calculations.
Chromatic aberration
Optical defect where different wavelengths of light are focused at different points.
Chromatic adaptation
Visual system's ability to adjust to the CCT of the lighting.
Chromatic analysis
Study of LED light color to verify compliance with specifications.
Chromatic binning
Selection of LEDs based on chromatic shade; defined by quadrilaterals (bins) in the CIE diagram.
Chromatic consistency
Color/shade consistency between multiple LED sources in the same space.
Chromatic dispersion
Color inconsistency along a strip or between fixtures.
Chromatic uniformity
Color consistency along the entire strip; ensured by binning.
Chromaticity
Color property defined by x,y coordinates in the CIE diagram.
Chromaticity shift
Variation in LED chromatic coordinates over time or with temperature changes.
Chromotherapy LED
Use of colored LED light for psychophysical wellness; spas and wellness centers.
Church LED lighting
LED lighting for churches; respects heritage, low UV emission.
CIE (Commission Internationale de l'Éclairage)
International organization defining colorimetry and photometry standards.
CIE 1931 chromaticity diagram
2D color representation chart; used for LED binning.
CIE 1931 (chromaticity diagram)
Two-dimensional diagram representing all human-perceivable colors; used for LED binning.
CIE 1976 (u'v')
More perceptually uniform chromaticity diagram; better for color comparisons.
CIE Ra
See CRI. Average color rendering index based on 8 color samples.
CIE Rf
TM-30 fidelity index based on 99 samples; more accurate than CRI.
CIE Rg
TM-30 gamut index; indicates if colors appear more or less saturated compared to reference.
Cinema application
LED lighting for movie theaters; pathway and seating illumination using low-brightness strips.
Cinema LED lighting
LED lighting for movie theaters; pathways and ambient lighting.
Cinematics (Spotlight)
Movement mechanism for adjustable track-mounted LED spotlights.
Circadian rhythm
Biological day/night cycle; foundation of Human Centric Lighting.
Circuit anti-bounce
Circuit that filters switch bounce in LED command buttons.
Circuit bootstrap
Startup circuit for half-bridge LED drivers.
Circuit breaker
Automatic switch protecting the LED circuit from overcurrent.
Circuit buck
Step-down DC-DC converter topology; most common in LED drivers.
Circuit charge pump
Charge pump for generating auxiliary voltages in LED drivers.
Circuit clamp
Voltage limiting circuit for LED protection.
Circuit comparator
Circuit that compares two voltages for LED driver control.
Circuit control
Circuit managing LED dimming and color signals.
Circuit emergency
Dedicated circuit for powering emergency LEDs.
Circuit feedback
Feedback loop in the LED driver to stabilize current or voltage.
Circuit flyback
Isolated converter topology for constant-current LED drivers.
Circuit full-bridge
Full-bridge topology for high-power LED drivers.
Circuit half-bridge
Half-bridge topology for LED drivers.
Circuit integrator
Circuit that integrates signals for gradual LED control.
Circuit layout
Electrical diagram of LED system connections.
Circuit LC
Inductor-capacitor filter at the output of the LED driver.
Circuit limiter
Circuit that maintains constant current to the LED chip.
Circuit multiplying
Circuit that multiplies voltage for specialized LED applications.
Circuit open (LED)
Fault where an LED breaks the circuit; the section turns off.
Circuit oscillator
Circuit generating the switching signal in switching LED drivers.
Circuit PFC
Power Factor Correction circuit in LED power supplies.
Circuit power
Circuit managing power distribution to the LED strip.
Circuit power supply
Electrical circuit distributing energy to the LED strip.
Circuit protection
Driver components protecting against overcurrent and short circuits.
Circuit push-pull
Topology for LED drivers with center-tapped transformers.
Circuit rectifier
Circuit converting AC to DC in LED power supplies.
Circuit regulator
Linear voltage regulator; low efficiency for LED applications.
Circuit resonant
LLC resonant topology for high-efficiency LED drivers.
Circuit return
Circuit providing a neutral return for smart LED dimmers without neutral.
Circuit sample-and-hold
Circuit that samples and holds signals for LED control.
Circuit sense
Current detection circuit for LED adjustment.
Circuit short (LED)
Fault where an LED shorts; adjacent LEDs may glow brighter.
Circuit snubber
RC network suppressing transients in LED dimmers.
Circuit soft start
Gradual startup circuit for LED power supplies.
Circuit strip power supply
Electrical diagram for LED strip power distribution.
Circuit voltage doubler
Voltage doubling stage in LED power supplies.
Circular economy (LED)
Sustainable approach to the LED product lifecycle: recycling and material reuse.
Circular profile
LED profile with circular cross-section for pendant and decorative applications.
Clad metal
Multi-layer composite metal for LED substrates with high thermal dissipation.
Clamp meter
Amperometric clamp for measuring current in LED circuits without cutting cables.
Class energy
Energy efficiency classification according to European regulations.
Class F insulation
Class F thermal insulation (155°C); used in industrial LED drivers.
Class I
Fixture with basic insulation and protective grounding.
Class II
Fixture with double or reinforced insulation, requiring no grounding.
Class III
Fixture powered by safety extra-low voltage (SELV), typical of LED systems.
Class LED efficiency
Energy efficiency classification for LED fixtures.
Class LED quality
Classification of the qualitative level of the LED system for project planning.
Class power supply protection
Insulation classification of the LED power supply: Class I or II.
Class reaction to fire
Flammability classification of LED profile materials.
Clean room LED lighting
LED lighting for cleanrooms; low particle emission and easy to clean.
Cleanroom application
LEDs for cleanrooms; low particle emission and easy sanitization.
Clear lens
Transparent lens or diffuser that does not alter LED light distribution.
Click & Fit
Pressure-fit mounting system for quick installation of covers and diffusers on LED profiles.
Click dimmer
Dimmer with predefined brightness adjustment steps.
Client LED
Customer commissioning an LED lighting project.
Climate zone
Climatic zone influencing the choice of IP rating and thermal resistance of LEDs.
Clinic LED lighting
LED lighting for medical clinics; high CRI and flicker-free.
Clip adapter
Adapter allowing mounting clips from one model to fit a different profile.
Clip anti-vibration
Clip with damping for environments subject to vibrations.
Clip butterfly
Clip with lateral wings for mounting LED profiles on thin surfaces.
Clip C-clip
C-section metal clip for surface-mounted profile installation.
Clip decorative
Visible mounting clip with finish coordinated to the LED profile.
Clip diffuser
Clip securing the diffuser within the LED profile's guide rails.
Clip hidden
Clip concealed between profile and surface; aesthetic mounting.
Clip profile corner
Mounting clip designed specifically for corner LED profiles.
Clip profile recessed
Clip for mounting LED profiles in suspended ceilings.
Clip profile slim
Miniaturized clip for ultra-thin LED profiles.
Clip spacing
Recommended distance between mounting clips along the LED profile.
Clip spring
Elastic metal clip for recessed LED profile installation.
Clip spring ceiling
Elastic clip for securing recessed LED profiles.
Clip stainless steel
Clip for humid or corrosive environments.
Clock signal
Timing signal in SPI protocols for addressable LED strips.
Cloister LED lighting
LED lighting for historic indoor cloisters and courtyards.
Close coupled
Mounting with minimal distance between diffuser and LED strip for low profile.
Closed loop control
LED control with sensor feedback to verify and correct output.
Closed terminal accessory
Closed end cap for the side without a power cable.
Closure temperature
Temperature at which a thermal fuse activates for protection.
Cloud management (LED)
Remote cloud platform for smart LED installations.
Cluster LED
Group of closely spaced LEDs for high luminous concentration.
CMS (Color Management System)
Color management system ensuring chromatic consistency across different LED sources.
Coating
Any surface treatment applied to profiles, diffusers, or LED strips.
Coaxial connector
Coaxial connector; rarely used for LEDs, more common for RF signals.
COB (Chip on Board)
LED strip with closely mounted chips producing a continuous light line without visible dots.
COB IP65
COB strip with protective coating for outdoor use; continuous light line even when exposed.
COB strip connector
Connector specifically designed for COB LED strips with closely spaced pads.
Code product
Unique alphanumeric identifier for an LED product in the catalog.
Code compliance
LED system compliance with local building and electrical codes.
Code EAN
Unique barcode for LED product warehouse management.
Code LED color
Coding system to identify CCT or LED color: e.g., 830 = 3000K.
Code LED profile
Unique code identifying the LED profile in the catalog.
Code LED strip
Unique code identifying the LED strip in the manufacturer's system.
Code power supply
Unique code identifying the LED power supply.
Coefficient of absorption
Percentage of light absorbed by a surface; complement of reflectance.
Coefficient of absorption diffuser
Percentage of light absorbed by the LED diffuser.
Coefficient of maintenance
Flux reduction factor over time used in lighting calculations.
Coefficient of performance (COP)
Ratio between luminous output and energy input of the LED system.
Coefficient of reflection
Percentage of light reflected by a surface; influences environmental lighting design.
Coefficient of reflection ceiling
Percentage of light reflected by the ceiling; typically 70-80%.
Coefficient of reflection floor
Percentage of light reflected by the floor; used in LED calculations.
Coefficient of reflection wall
Percentage of light reflected by walls; influences LED calculations.
Coefficient of retroreflection
Percentage of light the diffuser reflects back toward the LED strip.
Coefficient of Seebeck
Thermoelectric coefficient; used for measuring LED junction temperature.
Coefficient of thermal expansion (CTE)
Affects compatibility between strip and profile materials.
Coefficient of transmission
Percentage of light passing through a diffuser; opal is approximately 70%.
Coefficient of utilization
Ratio of useful luminous flux on the target surface to total emitted flux.
Coil (Reel)
Inductive component in switching LED power supplies for energy conversion.
Cold start
Initial startup of an LED system at low ambient temperatures.
Cold storage LED lighting
LED lighting for cold storage rooms; resistant to low temperatures.
Cold white LED strip
LED strip with cool color temperature (5500-8700K).
Collapsible diffuser
Foldable diffuser for easier transport and installation.
Colonnade LED lighting
LED lighting for colonnades and arcades.
Color bin
Chromatic classification group for LED chips during binning.
Color blending
Mixing of colors from adjacent LEDs for a homogeneous chromatic result.
Color boost
Controller function that increases LED color saturation.
Color calibration tool
Instrument for calibrating color in professional LED systems.
Color coding
Color-based coding of conductors to identify polarity and LED channels.
Color correction filter
Optical filter for adjusting LED light tint.
Color cross-fade
Gradual transition between two colors on an RGB LED strip.
Color cycle
Automated color change sequence on an RGB LED strip programmed via controller.
Color fidelity (Rf)
TM-30 index of overall color fidelity under LED lighting (scale 0-100).
Color gamut (Rg)
TM-30 index of average color saturation under LED lighting; Rg=100 equals reference.
Color loop
Continuous color change sequence on an RGB LED strip.
Color match
Chromatic correspondence between different LED strips or fixtures.
Color mixing chamber
Space between LEDs and diffuser where RGB colors blend.
Color organ
Device translating music into color variations on an LED strip.
Color palette
Range of colors available in an RGB or RGBCCT system.
Color picker
Graphical interface in the app for selecting colors.
Color point
Point on the CIE diagram representing a specific LED color.
Color preset
Pre-saved color in the LED controller, recallable with a button.
Color ramp
Gradual color variation along an LED strip.
Color rendering
See "CRI". Ability of an LED source to faithfully reproduce object colors.
Color sequence
Scheduled color sequence in a dynamic LED effect.
Color shift
Chromatic variation of an LED over time due to phosphor degradation.
Color space conversion
Conversion between color spaces (RGB, HSV, CIE) in the LED controller.
Color stability
LED's ability to maintain color consistency over time and temperature changes.
Color temperature
See "CCT". Parameter in Kelvin indicating light shade (warm, neutral, cool).
Color temperature adjustment
CCT adjustment via controller in tunable white LED strips.
Color temperature preset
Pre-saved color temperature recallable from the controller.
Color temperature proximal
Closest CCT on Planckian curves to the LED's color point.
Color wash
Uniform lighting with colored light via RGB strips.
Color wheel
Color reference wheel used in LED control apps.
Colorimeter
Portable instrument for measuring CCT and chromatic coordinates.
Colorimeter portable
Portable instrument for measuring LED light color in the field.
Colour gamut area
Area of the chromatic gamut in the CIE diagram covered by an LED system.
Combiner zone
Controller managing multiple LED zones with independent scenarios.
Comfort acoustic
Absence of thermal discomfort in the environment caused by LED heat output.
Comfort visual
Lighting condition that does not cause visual fatigue or discomfort; fundamental parameter in architecture.
Command Alexa
Voice command via Alexa to turn on, off, or dim LEDs.
Command dimmer
Adjustment signal sent to the LED driver to vary brightness.
Command Google
Google voice command for LED lighting control.
Command pulse
Button sending a pulse to the LED controller for on/dimming functions.
Command Siri
Siri voice command for LED control via Apple HomeKit.
Commercial communication
Promotional and informational materials for LED products.
Commercial LED lighting
LED lighting for offices, shops, and shopping centers.
Commissioning
Setup, configuration, and calibration of an installed LED system.
Commissioning report
Handover report for the commissioned LED system.
Communication infrared (IR)
Transmission of commands to the LED controller via infrared rays.
Communication powerline
Data transmission over the electrical network for LED control.
Communication technical
Technical information transmitted from manufacturer to LED customers.
Communication wireless
Wireless transmission of commands and data in LED systems: WiFi, Zigbee, BLE.
Compatibility Alexa
LED controller's ability to operate with Alexa voice assistant.
Compatibility dimmer-driver
Verification that dimmer and LED driver work correctly together.
Compatibility driver-strip
Voltage and power matching between power supply and LED strip.
Compatibility Google Home
LED controller's ability to operate with Google Home.
Compatibility HomeKit
LED controller's ability to operate with Apple HomeKit.
Compatibility Matter
LED device's ability to operate with the Matter standard.
Compatibility SmartThings
LED controller's ability to operate with Samsung SmartThings.
Compatibility strip-profile
Dimensional match between LED strip and profile channel.
Competitiveness
Ability of an LED product to offer superior performance at market price.
Completion of the system
Final phase of LED installation including testing and documentation.
Compliance CE
Manufacturer's declaration that the LED product meets EU directives.
Compliance customs
Customs documentation for LED product import/export.
Compliance environmental
Adherence of LED product to environmental regulations: RoHS, WEEE, REACH.
Compliance product
Adherence of LED product to declared standards and specifications.
Component replacement
Substitutable part of the LED system: strip, diffuser, end cap, driver.
Component spare
Replacement component for the LED system.
Components of the LED system
List of components: strip, profiles, driver, controller, connectors, sensors.
Composition chromatic
Proportion of different colors in the LED emission spectrum.
Composition of the kit
List of components included in an LED lighting kit.
Compressor
Compressor for cleaning LED profiles with compressed air before installation.
Concentrator solar
System concentrating solar light for off-grid LED power supply.
Condensation
Fogging of LED diffuser due to temperature difference; preventable with ventilation.
Condensation indoor
Condensation formation inside LED fixtures due to thermal swings.
Conditions commercial
Terms of sale, payment, and delivery for LED products.
Conditions environmental
Temperature, humidity, and other factors affecting LED performance.
Conditions installation
Environmental and procedural requirements for correct strip mounting.
Conditions sale
Commercial terms for purchasing LED products.
Conditions warranty
Terms and limits of the warranty offered by the LED manufacturer.
Conductivity electrical
Material's ability to conduct current; PCB copper has high conductivity.
Conductor neutral
Blue wire in the electrical network; connected to the LED power supply.
Conductor protective
Yellow-green PE wire; for grounding Class I LED fixtures.
Conduit cable routing
Guide for organized routing of LED cables.
Conduit corner
Duct for routing LED cables around corners.
Conduit IP20
Plastic duct for routing LED cables in indoor environments.
Conduit IP65
Watertight duct for routing LED cables in outdoor environments.
Conduit self-adhesive
Cable duct with double-sided tape for neat routing of LED cables.
Confirmation order
Document confirming acceptance of the LED product order.
Configuration
Setting of operational parameters of the LED system post-installation.
Configuration driver
Setting current, voltage, and dimming parameters of the LED driver.
Configuration system
Setting all system parameters: addresses, zones, scenes.
Configuration WiFi
Procedure for connecting the LED controller to the home WiFi network.
Connection 4-channel amplifier
Amplifier for RGBW strips with four independent channels.
Connection 5-channel amplifier
Amplifier for RGBCCT strips with five channels.
Connection bar
Terminal block for distributing power to multiple LED strips.
Connection branched
Parallel connection of LED strips from a single power point.
Connection cable-strip
Connection between power supply cable and LED strip.
Connection cascaded
Series connection of multiple LED fixtures on a single line.
Connection controller
Connecting the controller to the LED strip and command signals.
Connection corner 120-degree
Connector for 120° joints between LED strips.
Connection corner 135-degree
Connector for 135° joints between LED strips.
Connection corner 90-degree
Connector for 90° joints between two LED strip sections.
Connection dimmer
Wiring the dimmer to the driver and LED control system.
Connection dovetail
Mechanical interlocking joint between two LED profiles.
Connection electrical
Physical connection of electrical components in the LED system.
Connection parallel
Connection of multiple LED strips with identical voltages; avoids voltage drop.
Connection plug
Connection via socket and plug for easy LED fixture disconnection.
Connection quick
Solderless connection system for LED strips: clips, WAGO, hippo.
Connection sensor
Connecting the sensor to the controller for automated LED control.
Connection series
Sequential LED connection; total voltage is the sum of individual drops.
Connection star
Topology where each strip connects directly to the power supply.
Connection strip-to-driver
Electrical connection between LED strip and power supply.
Connection strip-to-strip
Junction between two LED strip sections.
Connection terminal
Electrical connection using screw or spring terminals for power cables.
Connectivity
Ability of the LED system to communicate with other devices and networks.
Connector 10 mm clip
Clip connector for 10 mm wide LED strips.
Connector 12 mm clip
Clip connector for 12 mm wide LED strips.
Connector 2-pin
For monochromatic strips; two contacts (+ and -).
Connector 2-way
Connector for splitting to two LED strip outputs.
Connector 3-pin
For CCT strips; three contacts.
Connector 3-way
Connector for branching to three LED strip outputs.
Connector 4-pin
For RGB strips; four contacts.
Connector 4-way
Connector for crossing to four LED strip outputs.
Connector 5-pin
For RGBW strips; five contacts.
Connector 6-pin
For RGBCCT strips; six contacts.
Connector 8 mm clip
Clip connector for 8 mm wide LED strips.
Connector banana
Connector for electrical testing and temporary LED system connections.
Connector clip
Solderless quick connector for LED strips; grips the copper pads.
Connector crimp
Connector attached to cable via mechanical compression; for permanent wiring.
Connector cross (+)
Cross connector for 4-way intersections of strip segments.
Connector DC 5.5x2.1
Standard DC connector for LED strip power supplies.
Connector DC 5.5x2.5
Alternative DC connector for LED strip power supplies.
Connector Dupont
Standard pin connector for LED system prototyping and testing.
Connector female
Receptacle of the LED connector; receives the male plug.
Connector flexible PCB
Small flexible PCB with connectors for tight bends between LED strips.
Connector G
Connector specific for LED strip with fitting of type G.
Connector hippo
Quick clip connector widely used in professional installations.
Connector IDC (Insulation Displacement)
Connector type that pierces cable insulation to establish electrical contact without stripping.
Connector IP20 clip
Unprotected clip connector for indoor LED strips.
Connector IP67
Waterproof sealed connector for LED strip joints in outdoor or humid environments.
Connector IP68
Hermetically sealed connector for permanent submersion; underwater strips.
Connector male
Plug of the LED connector; inserts into the female socket.
Connector Molex
Compact connector for indoor wiring in the LED industry.
Connector neon flex
Connector designed for powering and joining LED neon flex.
Connector pigtail
Connector on a free cable end for flexible LED system connections.
Connector pogo pin
Connector with spring-loaded pins for reliable contact.
Connector polarized
Insertable in only one direction; prevents polarity reversal.
Connector push-in 2-pole
Quick insertion connector for monochromatic strips.
Connector push-in 4-pole
Quick insertion connector for RGB strips.
Connector push-in 5-pole
Quick insertion connector for RGBW strips.
Connector push-in 6-pole
Quick insertion connector for RGBCCT strips.
Connector recessed
Connector designed to be concealed within the LED profile.
Connector solderless
Quick connector that grips the LED strip without requiring soldering.
Connector spring
Connector with spring contact for quick, tool-free connections.
Connector T
Connector for branching an LED line at 90° from a main run.
Connector track
Electrical connector for powering LED track systems.
Connector universal strip
Connector compatible with various widths and types of LED strips.
Connector WAGO
Professional spring connector for fast, secure connections.
Connector with 10 cm cable
Connector with 10 cm short cable for LED strips.
Connector with 100 cm cable
Connector with 100 cm cable for LED strips.
Connector with 15 cm cable
Connector with 15 cm cable for LED strips.
Connector with 30 cm cable
Connector with 30 cm cable for LED strips.
Connector with 50 cm cable
Connector with 50 cm cable for LED strips.
Connector with inline junction
Inline connector for joining two LED cables.
Connector with IP68 junction
Waterproof junction connector for underwater LED strips.
Consistency chromatic
Color uniformity across LED strips from the same batch and between different batches.
Constant flux control
System maintaining constant LED luminous flux by compensating for degradation.
Consultant LED lighting design
Professional offering specialized consulting in LED lighting.
Consulting energy
Consulting service for optimizing LED lighting energy efficiency.
Consulting free
Technical consulting service offered by the LED manufacturer.
Consulting lighting design
Professional service for LED lighting design.
Consumption annual
Electrical energy consumed by the LED system in one year.
Consumption per meter strip
Power drawn by the LED strip per linear meter; in W/m.
Consumption rest
Power drawn by the LED system in standby; should be minimized.
Consumption standby
Power drawn by the LED power supply when the strip is off.
Consumption total system
Sum of power ratings for strips, drivers, and auxiliary components.
Contact commercial
Manufacturer representative for commercial LED inquiries.
Contact technical
Manufacturer representative for technical LED support.
Container watertight
IP65/IP67 enclosure for power supplies and controllers.
Content copper of the PCB
Quantity of copper in the LED strip PCB; affects resistance and heat dissipation.
Continuity luminous of the profile
Absence of interruptions in the light line between adjacent LED profiles.
Continuity service
Ability of the LED system to operate without interruptions.
Continuity of the light line
Absence of visible breaks between adjacent profiles.
Contract EPC
Energy Performance Contract for LED installations with savings guarantees.
Contract maintenance
Agreement for periodic maintenance of the LED system.
Contract supply
Contractual agreement for the supply of LED products.
Contrast luminous
Brightness difference between adjacent surfaces.
Control 0-10V
Brightness management via continuous 0-10V signal.
Control analog
Brightness adjustment via analog dimming.
Control biometric
LED lighting activation via biometric recognition.
Control centralized
Management from a single panel or software interface.
Control chromatic
Management of LED light color via RGB or RGBCCT controller.
Control circadian
Automatic management of CCT and LED intensity according to biological rhythm.
Control color temperature
CCT adjustment in tunable white LED strips.
Control decentralized
Distributed management with independent local controllers.
Control environmental
Integrated management of LED lighting and building HVAC.
Control gesture
LED activation via sensor-detected hand gestures.
Control intensity
Brightness adjustment via dimming.
Control multiroom
LED lighting management across multiple rooms with independent scenarios.
Control proportional
LED dimming proportional to light sensor signal.
Control remote
Management of the LED system from a distance via app, web, or smart home system.
Control scene
Saving and recall of intensity and color combinations.
Control smartphone
LED lighting management via smartphone app.
Control time-slot
LED lighting management with different scenarios by time of day.
Control timer
Scheduled programming for LED on/off cycles.
Control voice
LED management via voice assistants.
Control zone
Independent management of different areas within the LED system.
Controller
Home automation controller.
Controller 0-10V
LED controller with 0-10V analog output for dimming.
Controller 1-10V
LED controller with 1-10V analog output for dimming.
Controller 16-zone
LED controller managing 16 independent zones.
Controller 2.4 GHz
LED controller with 2.4 GHz wireless communication.
Controller 4-zone
LED controller managing 4 independent zones.
Controller 8-zone
LED controller managing 8 independent zones.
Controller addressable IC
Controller with IC chip for driving addressable LED strips.
Controller Art-Net
LED controller compatible with Art-Net protocol over Ethernet.
Controller audio-reactive
LED controller synchronizing effects to music.
Controller central
Central control unit for automated LED management.
Controller DALI
Device compatible with DALI protocol for architectural lighting control.
Controller DALI-2
Controller compatible with DALI-2 protocol for advanced lighting control.
Controller display
LED controller with LCD or OLED display for parameter visualization.
Controller DMX
Device generating DMX512 signals for professional LED system control.
Controller DMX 1024-channel
DMX controller managing two universes for 1024 channels.
Controller DMX 512-channel
DMX controller managing a full universe of 512 channels.
Controller dynamic white
Two-channel controller for tunable white LED strips.
Controller effect
LED controller with preset effects: rainbow, chase, fade, strobe.
Controller Ethernet
LED controller with Ethernet connection for network management.
Controller gateway
LED controller acting as gateway between different protocols.
Controller IP65
LED controller with IP65 protection for outdoor installations.
Controller IR remote
LED controller including infrared remote.
Controller KNX-DALI
Controller converting KNX commands to DALI signals for LED drivers.
Controller master
Main LED controller coordinating slaves and amplifiers in the network.
Controller mini WiFi
Miniaturized WiFi LED controller for compact installations.
Controller multi-channel
Controller with multiple independent outputs for different strip groups.
Controller multi-protocol
LED controller compatible with multiple protocols: DALI, DMX, 0-10V.
Controller multi-zone
Controller managing independent LED zones with different scenes and dimming levels.
Controller neon flex
Controller specifically designed for LED neon flex management.
Controller on DIN rail
LED controller for mounting on DIN rail in electrical panels.
Controller programmable
LED controller allowing programming of scenes and sequences.
Controller push dimmer
LED controller operated by a push button with dimmer function.
Controller recessed
LED controller for recessed mounting in wall boxes.
Controller RF remote
LED controller including radio frequency remote.
Controller RGB
Three-channel controller for RGB LED strip color management via mixing.
Controller RGB with remote
RGB strip controller including remote for color selection.
Controller RGBCCT
Five-channel controller for RGB plus warm/cool white LED strips.
Controller RGBCCT WiFi
5-channel WiFi controller for RGBCCT LED strips.
Controller RGBW
Four-channel controller for RGB plus dedicated white channel strips.
Controller RGBW with app
RGBW controller manageable via smartphone app.
Controller sACN
LED controller compatible with sACN (Art-Net 1.31) protocol over Ethernet.
Controller scene
LED controller with 16 memorizable lighting scenes.
Controller single-channel
Controller regulating a single luminous channel; for monochromatic strips.
Controller slave
Secondary LED controller synchronized by the master.
Controller smart home
LED controller integrable with smart home platforms: Alexa, Google, HomeKit.
Controller solar panel
LED controller powered by solar panels for off-grid systems.
Controller SPI
Controller with SPI serial interface for addressable LED strips.
Controller standalone
Autonomous LED controller operating without network connection.
Controller timer
LED controller with programmable timer for on/off scheduling.
Controller touch
Controller with touch-sensitive panel for intuitive color and intensity adjustment.
Controller touch wall-mounted
LED controller with touch panel for wall mounting.
Controller Tuya WiFi
LED controller based on the Tuya platform for WiFi control.
Controller Wi-Fi
Controller connected to Wi-Fi network for app or voice assistant control.
Controller wireless DMX
DMX controller with wireless signal transmission.
Controller WS2812B
Controller specifically designed for WS2812B addressable LED strips.
Controller Zigbee
Controller based on Zigbee protocol for low-consumption mesh lighting networks.
Controller Zigbee 3.0
LED controller certified Zigbee 3.0 for interoperability.
Convection
Heat transfer via fluid (air) movement; primary dissipation method for LED profiles.
Convection forced
Air movement generated by fans to cool LED fixtures.
Convection natural
Spontaneous movement of warm air for LED profile heat dissipation.
Convention center LED lighting
LED lighting for convention centers; conference and gala lighting scenarios.
Conversion AC-DC
Circuit converting mains alternating current to direct current for LEDs.
Conversion current-voltage
Circuit converting a current signal to a voltage signal for LEDs.
Conversion DC-DC boost
Circuit that increases DC voltage.
Conversion DC-DC buck
Circuit that reduces DC voltage; used in some LED drivers.
Conversion lumen-lux
Calculation of illuminance in lux from LED flux in lumens.
Conversion photonic
Process by which phosphors convert blue LED chip light into broad-spectrum white light.
Converter analog-digital
Circuit that converts an analog signal (0-10V) into digital for an LED controller.
Converter DC-DC
Converts one DC voltage to another; used in some LED drivers.
Cool light
Light with high color temperature (≥5000K); activating and stimulating, for commercial and technical environments.
Cool technical light
LED lighting at 6500K for technical and industrial environments.
Cool white
Color temperature between 5500K and 8700K; bluish light, suitable for commercial and technical environments.
Coordination aesthetic
Matching finishes and materials between LED profiles and furnishings.
Copolymer (Diffuser)
Copolymer plastic material for LED diffusers with optimized properties.
Copper (Conductor)
Highly conductive metal used for PCB traces on LED strips.
Copper OFC
Oxygen-free copper for low-resistance LED conductors.
Corner bar
Rigid L-shaped bar for corners and angles.
Corner connector
L-shaped connector for 90° joints between LED strips in profile corners.
Corrosion
Deterioration of contacts or profiles caused by chemicals or humidity; anodizing protects the profile.
Corrosion galvanic
Deterioration between dissimilar metals in contact when exposed to humidity.
Corridor application
LED lighting for hallways; integrates presence sensors and automatic dimming.
Corridor LED lighting
LED lighting for hallways; includes sensors and uniformity.
Corrugated tube
Flexible corrugated tube for protecting LED cables.
Cosφ (Power Factor)
Ratio between active and apparent power; good LED power supply ≥ 0.9.
Cost analysis
Comparison between investment costs and benefits of LED lighting.
Cost energy
Energy expense for operating the LED system.
Cost installation
Labor price for mounting the LED system.
Cost lifecycle
Total cost of the LED system: purchase, installation, energy, maintenance, disposal.
Cost per light point
Average cost of each LED light point in the system.
Cost per lumen
Ratio between LED product price and luminous flux; indicates value.
Cost power supply
Price of the power supply for the LED system.
Cost total system
Sum of all costs: products, installation, commissioning.
Counter luminous
Counter with integrated LED strip for lighting and design.
Counter-section
Complementary element of the LED profile that fits into the recess.
Count of LEDs per meter
Number of LED chips per meter; ranges from 30 to 700+.
Count of light points
Total number of LED fixtures in the lighting design project.
Count of meters strip
Measurement of total LED strip length in the project.
Count of operating hours
Accumulated operating hours of the LED system.
Coupling mechanical
Mechanical connection between two LED profiles for continuity.
Coupling optical
Efficient transfer of light from the LED chip to the diffuser or lens through a transparent medium.
Courtyard LED lighting
LED lighting for building indoor and outdoor courtyards.
Cove architectural
Architectural recess housing LED strips for indirect lighting.
Cove double
Double groove for LED strips on both sides of a soffit.
Cove drywall
Perimeter drywall profile with housing for LED strip; ceiling-mounted indirect light.
Cove luminous
Architectural recess (drywall, wood, or metal) housing LED strips for indirect lighting.
Cove metal
Metal profile groove housing LED strips.
Cove prefabricated
Drywall or polystyrene element with preformed housing for LED strips.
Cove recessed
Ceiling recess with completely hidden LED profile.
Cove wood
Milled wood groove housing LED strips.
Cover (Diffuser)
Polycarbonate or PMMA element inserting into the LED profile; available in transparent, opal, or frosted.
Cover anti-yellowing
Diffuser with UV stabilizers to prevent yellowing.
Cover continuous
Single-piece diffuser for entire length; no joints.
Cover corner
Diffuser specifically for corner profiles, with 45° or 90° geometry.
Cover flat
Planar diffuser; thin and minimal profile.
Cover frosted
Semi-transparent diffuser with sandblasted finish; balances uniformity and light transmission.
Cover interchangeable
Diffuser replaceable without removing the profile.
Cover lens
Diffuser with convex profile for controlling light distribution.
Cover opal
Translucent white diffuser that evens light, hiding individual LEDs; reduces brightness by ~30%.
Cover plate
Cover plate for junction boxes and LED connections.
Cover profile
Diffuser closing the upper part of the LED profile.
Cover round
Semicircular cross-section diffuser for round profiles.
Cover transparent
Crystal-clear diffuser that does not reduce brightness; individual LEDs remain visible.
Cover UV-resistant
Diffuser with UV protection for outdoor use.
Coverage area
Surface illuminated by a single fixture or LED profile at the required level.
Coverage warranty
Elements covered by LED product warranty: defects, performance.
CQS (Color Quality Scale)
Alternative scale to CRI for LED chromatic quality.
Cree J Series
Cree J series LED chips with high current density.
Cree XLamp
Cree XLamp family of high-power LED chips.
Crestron
Professional automation system for LED lighting in commercial and luxury environments.
CRI (Color Rendering Index)
Color rendering index on a 0-100 scale; measures how natural colors appear. Values ≥90 are considered excellent.
CRI 70
Color rendering index 70; baseline for LED lighting.
CRI 75
Color rendering index 75; baseline for LED lighting.
CRI 80
Color rendering index 80; good for general LED lighting.
CRI 85
Color rendering index 85; good for LED lighting.
CRI 90
Color rendering index 90; excellent for LED lighting.
CRI 93
Color rendering index 93; excellent for LED lighting.
CRI 95
Color rendering index 95; superior for LED lighting.
CRI 97
Color rendering index 97; superior for LED lighting.
CRI 98
Color rendering index 98; superior for LED lighting.
CRI extended (R1-R15)
Set of 15 color samples for detailed color rendering evaluation, beyond the standard 8 CRI samples.
Crimping
Mechanical joining technique for sheet metal LED fixture housings.
Criteria LED strip selection
Parameters for selecting LED strips: CCT, CRI, W/m, lm/m, IP.
Critical angle
Incidence angle beyond which total internal reflection occurs within a diffuser.
Cross talk
Interference between adjacent channels in a multi-channel controller.
Cross-section
Transverse view of the LED profile showing internal geometry: strip housing, diffuser housing, mounting flanges.
CSA (Certification)
Safety certification issued by the Canadian Standards Association for the North American market.
Current density
Current per unit area in the LED chip; affects efficiency and lifespan.
Current limit
Maximum current allowed through the LED chip without degradation.
Current nominal
Current value for optimal operating conditions.
Current per meter strip
Current drawn by the LED strip per linear meter.
Current reverse
Current flowing in the opposite direction in an LED; can cause damage.
Current sensor
Current sensing circuit for LED adjustment.
Curve decay
Graph showing luminous flux reduction of an LED over time (L70, L80, L90 useful life).
Curve Kruithof
Illuminance-CCT relationship for visual comfort.
Curve luminous decay
Graph of LED flux reduction over time; basis for maintenance factor (MF).
Curve Planck
Spectral distribution of a black body; reference for LED CCT.
Curve V(λ)
Spectral sensitivity curves of the human eye; lumens are weighted against these curves.
Customization
Customization of strips, profiles, or systems according to project specifications.
Cut point
Mark on the LED strip indicating where it can be safely cut without damaging the circuit.
Cut-off angle
Angle beyond which the light source is no longer directly visible; determines visual comfort.
Cutting area
Marked zone on a strip indicating where to cut.
Cutting custom
Service cutting LED strips to exact requested lengths at predefined cut points.
Cutting diffuser
Cutting the profile cover to match the LED profile length.
Cutting pitch
Minimum segment length of a cuttable LED strip.
Cutting point
Mark on the LED strip indicating the designated cutting location.
Cutting profile custom
Service cutting LED profiles to exact requested lengths.
Cutting strip
Operation of separating the LED strip at the preset mark.
Cutting strip custom
Service cutting LED strips to exact requested lengths.
Cyan LED
Cyan LED (490-510 nm); used to expand gamut in multi-channel systems.
Cycle production
Sequence of manufacturing phases for LED strips.
Cyanoacrylate adhesive
Instant adhesive for quick fixings of small LED components.
↑ Back to top
D
D65 (illuminant)CIE standard illuminant; average daylight at 6504K.
Daisy chain cable
Cable prepared for series connection of LED fixtures.
DALI (Digital Addressable Lighting Interface)
International standard protocol (IEC 62386) for digital control of professional lighting.
DALI broadcast
DALI command sent to all devices simultaneously.
DALI bus
Two-wire unpolarized communication line for DALI devices.
DALI commissioning
Configuration and addressing process for devices on a DALI network.
DALI commissioning software
Software for configuration and addressing of DALI LED devices.
DALI DT6
DALI standard Device Type 6, specific for LED driver control.
DALI DT8
DALI standard Device Type 8, specific for color and color temperature control.
DALI gateway
Interface converting signals from home automation systems (KNX, BACnet) to DALI protocol.
DALI master
Device generating commands on the DALI network; controller or gateway.
DALI Monitor
Software for monitoring and diagnostics of DALI LED networks.
DALI power supply
Dedicated power supply for the DALI bus providing communication voltage.
DALI-2
Evolution of the DALI protocol with backward compatibility and added features (sensors, diagnostics).
Damp location
Humid environment without direct water contact; minimum IP44.
Damp proof membrane
Waterproof membrane between wall and LED profile to prevent moisture ingress.
Damp-rated
LED fixture certified for humid environments.
Damage from humidity
LED component failures due to moisture penetration.
Damage from overheating
LED failures due to excessive temperature, reducing lifespan.
Damage from overvoltage
LED component failures caused by mains voltage spikes.
Dark adaptation
Eye adaptation to low light levels; warm LEDs facilitate the process.
Dark corridor function
DALI function maintaining LEDs at minimum brightness when no motion is detected.
Dark sky compliant
Fixture compliant with light pollution regulations.
Dark spot
Dark or under-illuminated area in an LED system; requires design correction.
Dashboard monitoring
Digital panel for real-time monitoring of the LED system.
Dashboard smart home
Digital control panel for managing smart LED lighting.
Data cable
Cable for transmitting LED control signals (DMX, DALI, SPI, Ethernet).
Data logger
Data recorder for monitoring LED operating conditions.
Data logging
Continuous recording of LED operating parameters.
Data pin
Data pin on addressable LED strips carrying color information per pixel.
Data pin (addressable strip)
Data transmission pin on addressable LED strips carrying color info.
Data rate
Transmission speed of LED control data.
Datasheet
Document containing all technical specifications of the LED product.
Datasheet download
Ability to download the LED product datasheet from the manufacturer's site.
Daylight factor
Ratio of indoor to outdoor illuminance; used to calculate natural light contribution.
Daylight harvesting
Automatic system adjusting LED output based on available natural light to save energy.
Daylight integration
Combining natural light with LED lighting for energy efficiency.
Daylight sensor
Photosensor measuring natural light contribution.
Daylight spectrum
Sunlight spectrum; reference for full-spectrum LED and HCL.
Daylight white (5000-5700K)
Color temperature similar to midday sunlight.
dBm
Radio signal power unit; indicates wireless controller range.
DC (direct current)
Electrical current with constant polarity; LED strips run on DC at 5V, 12V, 24V, or 48V.
DC bus
DC distribution line for LED power supply.
DC power jack
DC power socket on LED fixtures.
DC-DC converter
Converts one DC voltage to another; used in some LED drivers.
Dead band
Range where dimmer adjustments produce no perceptible brightness change.
Dead load
Self-weight of LED profile and components; used for structural support calculations.
Dead pixel
Faulty LED in an addressable strip that does not respond.
Debounce
Filtering of switch/button bounce in LED control circuits.
Decay chromatic
Shift in LED light color over time due to aging.
Decay luminous
Progressive reduction of LED luminous flux over time; critical for rated lifespan.
Decay rate
Speed of luminous flux decrease over time.
Decision LED investment
Cost-benefit analysis for choosing LED lighting.
Decoder color
Device translating digital signals into colors for RGB strips.
Decoder DALI
Process of translating DALI commands into LED driver adjustments.
Decoder DMX
Process of converting DMX512 signals into PWM values for LEDs.
Decoder RGB
Device converting DMX/DALI to three PWM channels for RGB strips.
Decorative (profile)
LED profile with distinctive aesthetic design, intended as a visible design element.
Decorative application
LED strips for aesthetic effects in residential and commercial spaces.
Decorative light
LED lighting primarily for aesthetic and decorative purposes.
Decoration architectural
Use of LED strips to highlight architectural features.
Deep dimming
Brightness reduction to very low levels (0.1–1%) without flicker.
Default state
Power-on state of an LED controller; configurable.
Deflection
Bending or deformation of an LED profile under its own weight or external loads.
Deflection of the LED profile
Bending of the profile between supports due to self-weight.
Defrost function
Defrost cycle in LED fixtures for cold rooms/freezers.
Degradation of double-sided tape
Adhesion loss over time from heat/humidity; 3M VHB performs better.
Degradation of phosphor
Aging of LED phosphor causing a color shift toward yellow.
Degradation of the diffuser
Yellowing or clouding of the LED diffuser over time.
Degree of diffusion
Percentage of LED light diffused by the cover vs. transmitted.
Degree of diffusivity
Percentage of light scattered by the diffuser vs. directly transmitted.
Degree of opacity diffuser
Opacity level of the LED diffuser; affects uniformity and light loss.
Delay (programmed delay)
Timed delay for LED on/off switching.
Delta E
Perceptible color difference between two LED sources (measured in CIE L*a*b* space).
Delta T
Junction-to-ambient temperature difference; should be minimized.
Delta-uv (Duv)
Distance of color point from blackbody curve in CIE diagram; indicates deviation from pure white.
Demand response
Automatic LED load reduction upon grid operator request.
Demo LED lighting
Pre-order demonstration of LED lighting effects.
Density current
Current per unit area in the LED chip; affects efficiency and lifespan.
Density LED power
LED power per unit area (W/m²).
Density of LEDs per meter (LED/m)
Number of LED chips per meter; ranges from 30 to 700+.
Depth mixing
Minimum distance between the LED strip and the diffuser to achieve uniform light.
Depth profile
Vertical profile dimension; determines recess depth.
Depth recess
Milling depth required to house a recessed LED profile.
Derating
Power reduction of a driver when ambient temperature exceeds limits.
Description product
Text describing LED product features and applications.
Description technical
Text explaining LED product technical specifications.
Desiccant
Moisture-absorbing material placed in IP-rated LED fixtures.
Design bioclimatic
Design integrating LED lighting with building solar orientation.
Design circular
LED design approach prioritizing material recycling and reuse.
Design for disassembly
Profile design facilitating easy disassembly and recycling.
Design guide
Manufacturer-provided guide for LED strip and profile installation.
Design integrated
Design approach where LED lighting is seamlessly integrated into architecture.
Design luminous
Lighting design as an aesthetic and functional architectural element.
Design parametric
LED design using variable parameters for automated optimization.
Desktop controller
Desk-mounted LED controller with knobs/faders for manual control.
Desoldering
Solder removal process for LED strip repair.
Detectability
Sensor's ability to detect presence to trigger LED lighting.
Detection area
Coverage area of a motion sensor for LED activation.
Detection fault
Identification of LED system faults for maintenance.
Detection range
Maximum sensor detection distance in LED applications.
Detector (sensor)
Device detecting physical quantities for LED control.
Detector of smoke
Smoke detector with integrated LED status indicator.
Determination of required flux
Calculation of required LED flux to meet target illuminance.
Dew formation
Condensation on LED profiles from thermal shock; risk with inadequate IP rating.
Dew point
Temperature at which condensation forms on LED components.
Diagnostics
Process of identifying and troubleshooting LED system faults.
Diagonal cut
45° cut of LED profiles for corner joints.
Diagram block
Block diagram of the LED system showing component connections.
Diagram CIE 1931 chromaticity
2D color representation chart; used for LED binning.
Diagram connection
Electrical connection diagram between LED components.
Diagram Gantt
Timeline schedule for LED lighting project phases.
Diagram installation
Graphic layout showing LED component placement.
Diagram isocandela
Map showing curves of equal luminous intensity for an LED fixture.
Diagram isoilluminance
Map showing curves of equal illuminance on a surface lit by LEDs.
Diagram isolux
Map showing curves of equal illuminance projected by an LED fixture.
Diagram LED connection
Wiring diagram showing LED strip to driver connections.
Diagram LED installation
Drawing with LED system installation instructions.
Diagram LED principle
Functional diagram of LED system components and connections.
Diagram LED wiring
Electrical wiring diagram for the LED system.
Diagram luminous cone
Graphic representation of overlapping LED light cones.
Diagram polar
Plot of LED intensity vs. angle.
Diagram single-line
Simplified single-line electrical diagram of the LED system with protections.
Diagram system single-line
Simplified electrical single-line diagram of the LED system.
Diagram zoning
Diagram of LED system zones with different levels/scenes.
DIALux
Free lighting calculation software for simulating LED installations.
DIALux evo
Advanced version of DIALux for professional LED design.
DIALux plugin
Manufacturer plugin for importing photometric data into DIALux.
Die (LED chip)
Semiconductor crystal forming the LED's light-emitting core.
Die attach
Bonding process attaching the LED die to the package substrate.
Die size
Dimensions of the LED semiconductor crystal; larger dies emit more light.
Dielectric strength
Maximum voltage the insulation can withstand without breaking down.
Differential (switch)
Residual-current device (RCD/GFCI) protecting against leakage currents.
Diffraction
Optical phenomenon where light bends around obstacles.
Diffraction halo
Optical effect creating a colored halo around LED sources viewed through textured surfaces.
Diffused LED
LED with integrated lens diffusing the beam for a milky appearance.
Diffused light
Uniformly distributed light without harsh shadows, achieved via opal diffusers/indirect lighting.
Diffuser
Optical cover (PMMA/polycarbonate) on LED profiles to homogenize light output.
Diffuser asymmetric
Diffuser with optical profile directing light preferentially in one direction.
Diffuser black
Dark diffuser for stealth appearance when LEDs are off.
Diffuser click-in
Snap-in diffuser secured by pressure.
Diffuser clip
Retaining clip holding the diffuser in the profile groove.
Diffuser co-extruded
Diffuser manufactured simultaneously with the profile in a single extrusion.
Diffuser custom
Custom-shaped, thick, or opacified diffuser.
Diffuser decorative
Diffuser serving aesthetic purposes alongside optical functions.
Diffuser diamond
Diamond-patterned diffuser for controlled light dispersion.
Diffuser double-emission
Diffuser allowing light emission from two opposite sides.
Diffuser drop
Teardrop-shaped cover for omnidirectional emission.
Diffuser fabric
Diffuser made of technical fabric for LED profiles with a soft and decorative effect.
Diffuser flexible
Bendable diffuser for curved profiles and neon flex.
Diffuser gap
Space between diffuser and LED strip; affects optical mixing.
Diffuser graduated
Diffuser with gradient opacity along its length for fade effects.
Diffuser high-transmission
High-transparency opal diffuser (>80% transmission).
Diffuser honeycomb
Hexagonal honeycomb grid on diffuser for anti-glare control.
Diffuser magnetic
Magnetically retained diffuser for easy access and maintenance.
Diffuser material
Material composition of the diffuser (PMMA, PC, silicone, glass).
Diffuser micro-lenticular
Diffuser with microlenses for optimized light distribution.
Diffuser opal
Translucent white diffuser for uniform light output.
Diffuser pois
Microdot-patterned cover to control diffusion and reduce pixelation.
Diffuser prismatic
Micro-prismatic surface diffuser for controlled light distribution.
Diffuser retention
Safety mechanism preventing accidental diffuser fall.
Diffuser silicone
Flexible silicone cover for curved profiles and neon flex.
Diffuser UV-resistant
UV-stabilized diffuser cover for outdoor use.
Diffusion (of light)
Uniform light spreading via translucent materials or textures eliminating hotspots.
Digital lighting
LED systems controlled exclusively via digital protocols.
Digital signal processor (DSP)
Processor handling LED control signal processing.
Digital Twin
Virtual replica of an LED system for simulation and real-time monitoring.
Digitization
Shift toward connected, digitally controllable LED systems.
Dim level
Set brightness level (0–100%).
Dim range
Supported dimming range of an LED driver.
Dim-off
Feature turning LEDs completely off at minimum dimmer setting.
Dim-to-warm
Simultaneous CCT and brightness reduction, mimicking incandescent dimming.
Dimension milling
Width and depth of routed cavity for recessed LED profiles.
Dimension of the LED package
External dimensions of the LED chip package (e.g., 2835 = 2.8x3.5mm).
Dimension of the power supply
Physical size of the LED driver for placement planning.
Dimension of the profile housing
Width and depth of the recessed cavity for the profile.
Dimensions of the LED profile
Width, height, and length of the aluminum LED profile.
Dimensions of the LED strip
Width, thickness, and length of the LED strip.
Dimmer
Device for continuously adjusting LED brightness.
Dimmer 0-10V
Analog dimmer sending a 0–10V DC signal to control driver brightness.
Dimmer 0-10V wall-mounted
Wall-mounted dimmer with 0–10V output for LED drivers.
Dimmer 1-10V
0–10V variant where 1V minimum (~10% light) replaces full off.
Dimmer 1-10V wall-mounted
Wall-mounted dimmer with 1–10V output for LED drivers.
Dimmer adaptive
Auto-detecting dimmer that identifies the connected LED load type.
Dimmer Bluetooth
Bluetooth-enabled dimmer for smartphone control.
Dimmer Bluetooth portable
Portable Bluetooth dimmer for remote LED control.
Dimmer Bluetooth recessed
Bluetooth dimmer designed for in-wall box mounting.
Dimmer button
Push-button dimmer; hold to adjust brightness.
Dimmer capacitive
Dimmer with integrated capacitive touch interface.
Dimmer DALI recessed
DALI dimmer for in-wall box mounting.
Dimmer DALI touch
DALI dimmer featuring a touch interface for adjustment.
Dimmer DIN rail
DIN-rail mounted dimmer for electrical distribution boards.
Dimmer DIN-rail DALI
DALI dimmer for DIN-rail mounting in electrical panels.
Dimmer DMX
Dimmer receiving DMX512 signals for professional LED control.
Dimmer double-channel
Dual-channel dimmer for dynamic white LED strips.
Dimmer furniture
Compact dimmer for cabinet/furniture LED lighting.
Dimmer integrated profile
Miniaturized dimmer built into the LED profile.
Dimmer knob
Rotary knob dimmer for intuitive control.
Dimmer leading-edge
Leading-edge (TRIAC) phase-cut dimmer; variable LED compatibility.
Dimmer LED leading-edge
Leading-edge dimmer optimized for LED compatibility.
Dimmer LED-compatible
Dimmer specifically tested/designed for LED driver compatibility.
Dimmer miniaturized
Ultra-compact dimmer for tight installation spaces.
Dimmer multi-gang
Multi-gang wall plate housing multiple dimmers for different zones.
Dimmer multichannel
Multi-channel dimmer for RGB/multicolor LED strips.
Dimmer neon flex
Specialized dimmer for LED neon flex strips.
Dimmer outdoor
Externally mounted dimmer for LED fixtures.
Dimmer outdoor IP65
IP65-rated dimmer for outdoor LED installations.
Dimmer panel-mounted
Panel-mounted dimmer for DIN-rail installation.
Dimmer pedal
Foot-operated dimmer for studios/workshops.
Dimmer phase-cut
Phase-cut dimmer (leading or trailing edge) chopping the AC sine wave.
Dimmer PWM
PWM-based dimmer using high-frequency pulse-width modulation.
Dimmer recessed
In-wall box mounted dimmer.
Dimmer rotary
Rotary knob dimmer.
Dimmer scene recall
Dimmer with memory for saving and recalling lighting scenes.
Dimmer single channel
Single-output dimmer for monochromatic strips.
Dimmer slider
Linear fader/slider dimmer.
Dimmer three-channel
Three-channel dimmer for RGB LED strip control.
Dimmer touch
Touch-sensitive dimmer for intuitive LED control.
Dimmer trailing-edge
Trailing-edge (MOSFET/IGBT) phase-cut dimmer; highly LED-compatible.
Dimmer universal
Compatible with both LED and traditional light sources.
Dimmer universal KNX
KNX dimmer compatible with LED, halogen, and fluorescent loads.
Dimmer wall-mounted
Wall-mounted dimmer with decorative faceplate.
Dimmer with adjustable minimum
Dimmer allowing adjustment of the minimum brightness threshold.
Dimmer with display
Dimmer featuring a brightness level display.
Dimmer with feedback
Dimmer receiving status feedback from the LED driver.
Dimmer with light sensor
Dimmer with integrated ambient light sensor for auto-adjustment.
Dimmer with memory
Dimmer retaining the last set brightness level after power loss.
Dimmer with ramp
Dimmer with programmable fade-in/fade-out times.
Dimmer Zigbee recessed
Zigbee dimmer for in-wall mounting.
Dimmer Zigbee wall-mounted
In-wall Zigbee dimmer for wireless LED control.
Dimmer Zigbee portable
Portable Zigbee dimmer for wireless control.
Dimmer 433 MHz RF
433 MHz RF dimmer for wireless LED control.
Dimmer 868 MHz RF
868 MHz RF dimmer for wireless LED control.
Dimmer button
Momentary push-button dimmer.
Dimmer with logarithmic curve
Dimmer with logarithmic curve matching human brightness perception.
Dimmer WiFi remote
Wi-Fi controllable dimmer accessible via app.
Dimmer wireless
Radio-controlled dimmer (RF, Zigbee, BT, Wi-Fi).
Dimming
Brightness adjustment process; analog (0–10V) or digital (PWM, DALI, DMX).
Dimming 0 to 100%
Full-range brightness adjustment from off to max.
Dimming 0.1%
Deep dimming capability down to 0.1% for hospitality/residential.
Dimming 1 to 100%
Brightness adjustment from 1% to max.
Dimming 1 kHz PWM
1 kHz PWM dimming for flicker-free LED strips.
Dimming 10 kHz PWM
10 kHz PWM dimming, flicker-free even in video recording.
Dimming 20 kHz PWM
20 kHz PWM dimming, beyond human hearing for silent operation.
Dimming 0-10V analog
Brightness control using a 0–10V analog signal.
Dimming compatibility
Ensuring proper operation between dimmer and LED driver.
Dimming curves
Graphs showing dimmer input vs. perceived LED brightness output.
Dimming current-reduction
Current-reduction dimming technique lowering DC to the LED chip.
Dimming DALI digital
Digital brightness control via the DALI protocol.
Dimming deep
Ability to dim to very low levels (0.1–1%) without flicker.
Dimming DMX digital
Digital brightness control via the DMX512 protocol.
Dimming flicker
LED flicker during dimming, usually from driver-dimmer mismatch.
Dimming full range
Full-range dimming 0-100% without dead zones.
Dimming linear
Linear dimming curve proportional to control signal.
Dimming logarithmic
Logarithmic dimming curve matching the eye's non-linear response.
Dimming smooth
Seamless, step-free brightness transitions.
DIN 5035
German indoor lighting standard; reference for LED projects.
DIN rail
Standardized metal rail for electrical panel component mounting.
Diode
Electronic component allowing current flow in one direction; LED is a light-emitting diode.
Diode bridge
Rectifier bridge for AC to DC conversion.
Diode flyback
Flyback diode protecting inductive circuits in LED drivers.
Diode protection
Anti-parallel diode protecting LEDs from reverse voltage.
Diode rectifier
Rectifier diode for AC/DC conversion in LED power supplies.
Diode Schottky
Low forward-voltage diode used in LED power circuits.
Diode TVS (transient)
Transient voltage suppression diode protecting against spikes.
DIP switch
Toggle switches for configuring LED driver addresses/parameters.
Direct burial
LED fixture/cable rated for direct ground burial.
Direct drive
Direct mains-powered LED operation without a separate driver (230V AC).
Direct light ratio
Percentage of light emitted downward in direct/indirect fixtures.
Direct view
Installation where LED strip is directly visible; requires COB/high density for uniformity.
Direct/indirect (fixture)
Profile emitting light both upward and downward.
Direction of LED emission
Light emission direction of the strip within the profile.
Direction of LED light
Strip emission direction: downlight, uplight, or side-emitting.
Direction of luminous flux
Light emission direction: frontal, lateral, or upward.
Direction of mounting strip
LED strip installation orientation; observe polarity arrows.
Direction of power supply
Power injection side of the LED strip, marked on the PCB.
Directional LED
LED with focused beam via integrated optics.
Dirt depreciation factor
Flux reduction multiplier accounting for dirt accumulation on diffusers.
Disconnect switch
Isolator switch for safely disconnecting the LED circuit.
Disco LED
LED lighting for nightclubs featuring dynamic RGB effects.
Discrete LED
Individual packaged LED for point-source applications.
Dispersion chromatic
Color inconsistency along a strip or between fixtures.
Displacement ventilation
Ventilation method aiding heat dissipation from ceiling LED profiles.
Display LED
LED matrix panel for graphics and video.
Dissipation per meter
Heat output per linear meter of LED profile (W/m).
Distance between fixing points
Spacing between profile mounting clips/screws.
Distance dimming
Brightness adjustment based on object proximity.
Distance from the diffuser
Gap between strip and diffuser affecting light uniformity.
Distance maximum controller
Max cable length between controller and strip without signal degradation.
Distance mixing
Required LED-to-diffuser distance for seamless RGB color blending.
Distance power supply
Cable run length from power supply to LED strip.
Distance reading
Distance at which text remains legible under the lighting.
Distance spacing
Optimal spacing between parallel profiles for uniform lighting.
Distance to driver
Driver-to-strip cable length; critical for voltage drop calculations.
Distance to fixture
Layout spacing between LED luminaires.
Distortion aberration
Image deformation produced by an uncompensated LED lens.
Distributed control
Decentralized LED control using multiple local controllers.
Distributed driver
System using multiple localized LED drivers instead of one central unit.
Distribution asymmetric
Asymmetric beam pattern for wall washing or path lighting.
Distribution batwing
Batwing intensity distribution for uniform horizontal illumination.
Distribution board
Electrical panel housing circuit protections for LED systems.
Distribution harmonic
Harmonic distortion content of LED power supply current.
Distribution Lambertian
Ideal cosine-based intensity distribution typical of many LEDs.
Distribution LED fixture
Spatial layout of LED light points in a room.
Distribution luminous
Luminance mapping across an LED diffuser surface.
Distribution network
Retail/distribution network ensuring widespread LED product availability.
Distribution of light points
Planar arrangement of LED fixtures.
Distribution photometric
Light distribution curve/diagram of an LED fixture.
Distribution spatial
3D arrangement of LED lighting in a space.
Distribution spectral power
Spectral Power Distribution (SPD) graph showing emitted wavelengths.
Distributor
Company distributing LED products from various manufacturers.
DMX cable
110-ohm shielded cable specifically for DMX512 signals.
DMX controller software
PC software for generating and editing DMX sequences.
DMX daisy chain
Serial connection method for DMX devices.
DMX decoder
Device converting DMX512 data into PWM signals for LED strips.
DMX in/out
DMX signal input and output connectors.
DMX merger
Device combining multiple DMX universes/streams into one.
DMX mini controller
Compact DMX controller for small-scale LED setups.
DMX mode
Defines how many DMX channels a fixture uses.
DMX over IP
Transmission of DMX data over Ethernet networks (Art-Net/sACN).
DMX recorder
Device capturing and storing DMX sequences for playback.
DMX scene controller
DMX controller with preset scene memory.
DMX splitter
Device amplifying and isolating DMX signals across multiple outputs.
DMX terminator
120Ω resistor placed at the end of a DMX line to prevent signal reflection.
DMX tester
Handheld tool for diagnosing DMX signal integrity.
DMX512
Standard digital protocol for theatrical/architectural lighting control (512 channels/universe).
Docking station (LED)
Charging/mounting base for portable LED work lights.
Documentation as-built
Final documentation reflecting the installed LED system configuration.
Documentation commercial
Catalogs, price lists, and brochures for LED products.
Documentation maintenance
Logbook recording LED system maintenance activities.
Documentation project
Complete set of technical documents for an LED lighting project.
Documentation regulation
CE certificates, compliance declarations, and test reports.
Documentation technical
Collection of datasheets, certificates, and installation manuals.
Documentation testing
Commissioning test reports for the installed LED system.
Dome LED
LED lighting solutions for architectural domes/ceilings.
Dome lens
Dome-shaped protective cover diffusing the LED beam.
Domotics
Home automation technologies including intelligent LED lighting control.
Door sensor
Contact sensor triggering automatic LED lighting upon door opening.
Doping (semiconductor)
Semiconductor doping process creating p-n junctions in LEDs.
Dormer LED
LED lighting designed for dormer windows/attic spaces.
Dosing LED light
Fine-tuning LED intensity for optimal ambient levels.
Dot spacing
Distance between individual LEDs; affects dot-free appearance behind diffusers.
Dot-free
Characteristic of LED strips appearing as a continuous line without visible hotspots.
Dotless (strip)
Strip producing uniform illumination without visible LED points through a diffuser.
Double channel (strip)
Two-channel LED strip, typically for tunable white/CCT.
Double chip (LED)
LED package containing two semiconductor dies for higher output.
Double diffuser
Profile featuring two diffusers for bidirectional light emission.
Double feed
Power injection from both ends of an LED run.
Double power supply
End-fed power injection method to minimize voltage drop.
Double power supply strip
LED strip powered from both ends for uniform brightness.
Double profile
Installation of two LED profiles side-by-side for bidirectional lighting.
Double strip
Dual parallel LED strip configuration for doubled luminous flux.
Double-sided tape
Adhesive tape used as the standard mounting method for LED strips.
Double-sided tape acrylic
Acrylic-based adhesive; excellent resistance to temperature and UV.
Double-sided tape rubber
Synthetic rubber-based adhesive; good initial adhesion but lower thermal resistance.
Down-converter
Phosphor/filter converting high-energy photons to lower-energy (longer wavelength) light.
Down/up light
Fixture emitting light both downward and upward.
Downlight LED
Recessed ceiling LED fixture; modern alternative to traditional halogen downlights.
Downlight retrofit
Conversion kit replacing traditional downlight sources with LED modules.
Downlight trimless
Frameless recessed downlight for a seamless ceiling finish.
Draft stopper
Gasket sealing profile recesses against air drafts.
Drain wire
Grounding wire connected to cable shielding.
Drainage hole
Vent/drain hole in IP65-rated profiles to prevent condensation buildup.
Draw wire
Pull wire for routing LED cables through conduits/ceilings.
Drawing execution
Final technical drawing for LED system construction.
Drawing installation
Electrical layout diagram showing LED fixture locations.
Drawing LED installation
Installation diagram with mounting instructions.
Drip loop
Cable loop preventing water from running into electrical connections.
Driver
LED driver with integrated DALI interface for digital dimming.
Driver 12V constant voltage
12V DC constant-voltage driver for LED strips.
Driver 24V constant voltage
24V DC constant-voltage driver for professional LED strips.
Driver 48V constant voltage
48V DC constant-voltage driver for long-run LED strips.
Driver 1050mA constant current
1050mA constant-current driver for high-power LED modules.
Driver 1400mA constant current
1400mA constant-current driver for very high-power fixtures.
Driver 350mA constant current
350mA constant-current driver for standard power LEDs.
Driver 500mA constant current
500mA constant-current driver for LED modules.
Driver 700mA constant current
700mA constant-current driver for high-power LEDs.
Driver for addressable strip
Power supply sized for addressable LED strips with adequate current.
Driver multi-output
LED driver with multiple independent outputs for separate strip groups.
Driver with backup
Redundant LED driver for quick fault replacement.
Driver with DIP switch
LED driver featuring DIP switches for output current selection.
Driver with fan
Actively cooled LED driver with built-in fan for high-power applications.
Driver with programmable output
Configurable LED driver (current, dimming curve, thermal protection) via software.
Driver with PWM output
PWM-output LED driver for flicker-sensitive strip applications.
Droop (efficiency droop)
LED efficiency decline at high drive currents.
Drum dimmer
Rotary drum dimmer used in theatrical LED setups.
Dry contact
Voltage-free relay contact for interfacing sensors with LED systems.
Dry film photoresist
Photosensitive film used in LED strip PCB manufacturing.
Dry location
Indoor environment with no moisture; suitable for IP20 strips/drivers.
Drywall integration
Recessed LED profile installation in plasterboard for seamless architectural lines.
Drywall with preformed housing
Plasterboard with pre-milled grooves for direct LED profile insertion.
DT (Device Type)
DALI classification identifying device function (DT6=driver, DT8=color).
Dual band Wi-Fi
2.4/5 GHz Wi-Fi connectivity for reliable LED controller communication.
Dual CCT
LED strip with two fixed color temperatures on separate circuits.
Dual color LED
LED package emitting two distinct colors.
Dual driver
Power supply with two independent output channels.
Dual function (emergency)
Fixture operating as both standard and emergency lighting.
Dual output driver
LED driver powering two separate strip circuits.
Dual white
See Tunable white. Strip with warm and cool whites for CCT adjustment.
Dual-mode (controller)
Controller supporting both standalone and networked operation.
Duct
Conduit for routing LED cables in ceilings/walls.
Duct cover
Element protecting the cable entry point in the LED profile.
Duct IP20
Plastic duct for routing LED cables in indoor environments.
Duct IP65
Watertight duct for routing LED cables in outdoor environments.
Durability
Ability to maintain performance over time under real-world conditions.
Durability of the LED system
Total expected operational lifespan before system replacement.
Dust accumulation
Deposition of particles on the LED diffuser that reduces luminous flux over time.
Dust cover
Protective cap for unused LED connectors.
Dust tight
Complete protection against dust ingress (IP6X).
Dust-tight (IP6X)
First digit '6' in IP code indicating total dust protection.
Duty cycle
PWM on-time ratio determining perceived LED brightness.
Duty cycle (power supply)
Switching circuit on-time ratio in power converters.
Duv
See Delta-uv. Deviation of LED color point from the Planckian locus.
DVI (for LED video)
Digital video interface for driving LED displays/matrices.
Dynamic color
Continuous color-changing effects via RGB controllers.
Dynamic effect
Moving or transitioning light patterns on LED strips.
Dynamic range
Ratio between minimum and maximum controllable brightness.
Dynamic scene
Lighting scene with automated temporal variations in color/intensity/CCT.
Dynamic white
See Tunable white. Adjustable color temperature system.
Dynamic white (Dynamic White)
See CCT Tunable. Real-time warm-to-cool temperature adjustment.
↑ Back to top
E
Earth leakage currentLeakage current to earth; limited by standards.
Earthing
Grounding of the LED system; mandatory for Class I fixtures.
Earthing (grounding)
Connection of the profile or LED fixture to the protective conductor.
Earthing clamp
Earth terminal for connecting the LED profile to the PE conductor.
Earthing conductor
Yellow-green protective conductor connected to the mass of the LED fixture.
Earthquake resistant LED
LED fixture designed to withstand seismic stresses.
Easy connect
Plug-and-play quick connection system for LED strips and profiles.
Easy install
Quick mounting system for LED profiles without special tools.
Easy install bracket
Simplified mounting bracket for quick installation of the LED profile.
Eave lighting
LED lighting under the roof eaves; for residential facades.
Eave mount
Mounting of LED strip under the roof eaves.
Excellence in LED lighting
Higher level of quality and service in the LED sector.
Echo cancellation
Reduction of echo in LED control signals on long lines.
Eclipse (profile)
Commercial name for suspended round LED profiles.
Eclipse effect
Optical halo effect around a matte element backlit by LEDs.
Eco mode
Energy saving mode that reduces consumption at no-load.
Eco-friendly LED
LED product with low environmental impact over its lifetime.
Eco-label
Ecological label certifying the sustainability of the LED product.
Economics of LED lighting
Economic aspects of adopting LED technology.
Economic analysis LED
Economic analysis of investment in LED lighting: ROI and payback.
Eddy current loss
Losses due to parasitic currents in the magnetic cores of the LED driver.
Edge connector
Connector on the edge of the LED strip.
Edge connector pin
Pin of the edge connector on the LED strip for quick connection.
Edge connector strip
Connector that clips onto the cut edge of the LED strip.
Edge glow
Luminous glow on the edge of the LED diffuser.
Edge illuminated LED
Edge of an architectural element illuminated with LED strip.
Edge lighting
Lateral lighting of a transparent or translucent panel via LED strips positioned on the edge.
Edge luminous
Recessed or surface-mounted LED profile installed along edges of shelves, steps, or furniture for a linear effect.
Edge luminous step
LED strip on the edge of the step for safety and decoration.
Edge mounting
Mounting of the LED profile along the edge of a surface.
Edge of cutting
Margin of the strip after cutting; to be protected with silicone.
Edge protection
Protection of the cut edges of the LED strip with silicone or caps.
Edge-lit panel
LED panel illuminated from the edge with a light guide.
Edgeband lighting
LED lighting inserted into the edge of shelves and racks.
Edison screw
Screw fitting for LED retrofit lamps; E14 (small) and E27 (large).
Educational LED lighting
LED lighting for schools and educational institutions.
Educational lighting
LED lighting for school and educational environments; low UGR and uniformity.
Effect candle
Simulation of a flickering flame on LED strips for ambiance.
Effect contour
LED strip behind an object or panel to create a luminous outline.
Effect display
LED strip behind an object or panel to create a luminous outline.
Effect flow
Continuous flow of colors running along the LED strip.
Effect frame
LED strip hidden in a frame for indirect perimeter lighting.
Effect ice
Blue and white tones slowly moving on LED strips.
Effect lava
Slowly moving color bubbles on addressable LED strips.
Effect lightning
Simulation of lightning with quick flashes on LED strips.
Effect meteor
Luminous point with long trail falling on the LED strip.
Effect noise
Random pattern of colors and brightness on addressable LED strips.
Effect ocean
Undulating blue and green tones on LED strips for a marine effect.
Effect police
Alternating red and blue flashing on LED strips.
Effect rainbow
Cyclic multicolor pattern on addressable LED strips.
Effect ripple
Luminous undulation propagating on addressable LED strips.
Effect snow
Snow effect with white points falling on LED strips.
Effect thunder
Simulation of thunder with flash and dimming on LED strips.
Effect tunnel
Quantum phenomenon in the LED semiconductor.
Effect washing
Uniform distribution of LED light over a large surface.
Effect waterfall
Light effect descending like a waterfall on vertical LED strips.
Effect wave
Undulating movement of light along the LED strip.
Effective area
Area effectively illuminated by the LED system at the required level.
Effective illumination
Effective illuminance on the target surface after all LED system losses.
Effective lumens
Lumens of the fixture after optical and thermal losses.
Efficacy of the LED system
Lumens emitted by the complete fixture per watt consumed.
Efficiency class
Energy efficiency class of the LED fixture according to EU regulations.
Efficiency curves
Graph of LED luminous efficacy as a function of current.
Efficiency droop
Drop in LED efficiency with increasing current; intrinsic chip phenomenon.
Efficiency improvement
Improvement of LED system efficiency through component optimization.
Efficiency loss
Efficiency loss in the LED system due to driver, optics, and temperature.
Efficiency of the diffuser optical
Percentage of light passing through the diffuser; opal ~70%, transparent ~95%.
Efficiency of the LED driver
Ratio between driver output and input power; typically >90%.
Efficiency of the LED profile
Ratio between light exiting the profile and light from the strip; depends on the diffuser.
Efficiency of the LED strip
Luminous efficacy of the LED strip; in lm/W.
Efficiency of the power supply
Ratio between output power and mains power drawn; professional supplies exceed 90%.
Efficiency of the system
Overall efficiency considering LED chip, driver, diffuser, and heat dissipation; always lower than chip-only efficacy.
Efficiency overall system
Ratio between useful light and power consumed by the entire LED system.
Efficiency phosphor conversion
Percentage of blue photons converted to white by the LED phosphor.
Efficiency quantum
Ratio between emitted photons and injected electrons in the LED chip.
Efficiency rating
Classification of the complete LED fixture’s efficiency.
Egg crate louver
Square-cell anti-glare grid for LED fixtures.
E-ink LED backlight
Backlighting for e-ink displays; features reduced power consumption.
Elapsed time indicator
Indicator of elapsed operating time for LED maintenance.
Elastic mount
Elastic mounting of the LED profile for vibration absorption.
Elastomer (gasket)
Material for IP gaskets in outdoor LED profiles.
Elbow connector
Elbow connector for corner connections in LED cables.
Electric field
Field generated by the voltage applied to the LED chip; drives charge carriers.
Electric panel
Electrical panel with protections and power supplies for the LED system.
Electric shock protection
Protection against electric shocks; guaranteed by SELV/PELV.
Electrical bonding
Equipotential connection between metallic parts of the LED system.
Electrical clearance
Safety distance between parts at different voltages in the LED driver.
Electrical drawing
Electrical diagram of the LED system with symbols and connections.
Electrical enclosure
Electrical cabinet for power supplies and LED controllers.
Electrical load calculation
Calculation of total electrical load of the LED system for sizing.
Electrical noise
Electrical noise that can cause malfunction or flicker in LEDs.
Electrical plan
Electrical installation plan showing LED fixture and circuit placement.
Electrical power consumption
Power absorbed by an LED system from the mains; measured in Watts or kWh.
Electrical safety test
Electrical safety test on LED fixtures: strength, insulation, leakage.
Electrical schematic
Detailed electrical diagram of the LED system.
Electrical specification
Electrical specifications of the LED product: voltage, current, power.
Electro-optical conversion
Conversion of electrical energy into light in the LED chip.
Electrode
Electrical terminal of the LED chip: anode and cathode.
Electrode gap
Distance between electrodes in the LED; a production process parameter.
Electroluminescence
Luminous emission due to electric field; fundamental principle of LEDs.
Electrolytic capacitor
Electrolytic capacitor in the LED driver for voltage filtering.
Electromagnetic compatibility test
EMC test to verify compliance of the LED fixture.
Electromagnetic relay
Electromechanical relay for switching LED circuits.
Electromagnetic spectrum
Full spectrum of radiation; visible light is the 380–780 nm portion.
Electron
Negatively charged particle; electron flow in LEDs generates light.
Electron-hole recombination
Electron-hole recombination in the LED junction that generates photons.
Electronic ballast
Electronic reactor; bypassed during LED retrofits.
Electronic ballast bypass
Removal of the electronic ballast for direct LED tube installation.
Electronic control gear
Electronic LED driver compliant with EN 61347 standard.
Electronic dimmer
Dimmer based on electronic components (MOSFET, IGBT) for LEDs.
Electronic fuse
Electronic fuse with automatic reset for LED protection.
Electronic label
Electronic label with LED display for retail shelves.
Electronic timer
Electronic timer for programming LED lighting.
Electronic transformer
High-frequency electronic transformer; LED compatibility must be verified.
Electrostatic discharge (ESD)
Discharge that can damage LED chips; protection required.
Element decorative
Architectural component with integrated LED strip for decoration.
Element of finish
Aesthetic accessory completing the LED profile: end cap, joint.
Elevated temperature test
LED operation test at temperatures above nominal.
Elevation angle
Vertical aiming angle of an LED fixture.
Elevator lighting
LED lighting for elevator cabins; slim and vandal-resistant profiles.
ELG (Mean Well series)
Mean Well power supply family with 3-in-1 dimmable input.
Elimination of LED points
Achieving continuous light without visible points using COB or high-density strips.
Ellipse MacAdam
Area in the CIE diagram of perceptible chromatic tolerance.
Elliptical beam
LED light distribution with elliptical cross-section.
Elongated profile
LED profile with vertically elongated rectangular cross-section.
Elongation (strip)
Stretching of flexible LED strip under tension; must not be exceeded.
Elongation at break
Elongation to rupture of the flexible LED strip material.
Elumtools
Revit plugin for LED lighting calculations directly in the BIM model.
ELV (Extra Low Voltage)
Extra-low voltage (≤50V AC or ≤120V DC); most LED strips operate in ELV.
Embedded controller
LED controller integrated into the profile or fixture.
Embedded driver
Driver integrated into the profile; not visible externally.
Embedded lighting
LED lighting fully integrated and invisible in the architectural structure.
Embedded sensor
Sensor integrated into the LED profile.
EMC (electromagnetic compatibility)
Regulatory requirement that LED fixtures neither emit nor are sensitive to electromagnetic interference.
Emergency ballast
See Emergency power supply. Battery for LED operation during blackout.
Emergency ballast conversion
Conversion of a standard LED fixture to emergency use with a dedicated kit.
Emergency charge indicator
LED indicator showing the state of charge of the emergency battery.
Emergency circuit
Dedicated electrical circuit for emergency LED lighting.
Emergency compliance
Compliance of the emergency LED system with EN 1838 and EN 50172 standards.
Emergency conversion kit
Kit to convert a fixture for emergency use.
Emergency corridor
Path illuminated with emergency LEDs for evacuation.
Emergency design
Design of emergency LED lighting compliant with regulations.
Emergency driver
LED driver specifically for emergency operation with battery.
Emergency duration
Emergency lighting duration; typically 1 or 3 hours.
Emergency escape route
Escape path illuminated with emergency LEDs.
Emergency exit LED
LED fixture with pictogram indicating emergency exits.
Emergency exit sign
Emergency exit sign illuminated by LEDs.
Emergency fixture
LED fixture with integrated or dedicated emergency function.
Emergency indicator
LED indicator of emergency module status (charge, test, fault).
Emergency inverter
Circuit converting battery voltage to power LEDs during emergency.
Emergency lamp
Portable emergency LED lamp with rechargeable battery.
Emergency LED module
Complete module with LED, battery, and circuit for emergency lighting.
Emergency lighting
LED system with integrated battery that automatically activates upon mains failure.
Emergency lighting calculation
Lighting calculation specific to emergency LED lighting.
Emergency lighting plan
Plan of emergency LED lighting compliant with standards.
Emergency lighting standard
EN 1838 standard for emergency LED lighting requirements.
Emergency luminaire
LED fixture dedicated to emergency lighting.
Emergency maintenance
Maintenance of the emergency LED system: battery and functionality tests.
Emergency mode
LED operation mode during blackout using battery power.
Emergency power pack
Battery module to power emergency LEDs during blackout.
Emergency rating
Classification of the LED fixture for emergency operation.
Emergency run time
Duration of LED operation in emergency; typically 1 or 3 hours.
Emergency self-test
Automatic periodic test of the emergency LED module with report.
Emergency signage
Emergency signage illuminated with LEDs to indicate escape routes.
Emergency start-up time
Time for emergency LEDs to switch on after mains interruption.
Emergency status LED
LED indicator of emergency module status: charge, fault, test.
Emergency supply unit
Emergency power supply unit for LEDs with integrated battery.
Emergency switching
Automatic switching from normal to emergency LED power supply.
Emergency test button
Button for periodic testing of the emergency module.
Emergency test log
Log of periodic tests of the emergency LED lighting.
Emergency test schedule
Schedule of mandatory periodic tests for emergency LEDs.
EMF (electromotive force)
Potential difference driving current in the LED circuit.
EMI (Electromagnetic Interference)
Electromagnetic interference; switching drivers can generate it.
Emission angle
Total angle within which the LED emits light; defined by package and optics.
Emission angle control
Control of LED emission angle via optics and diffusers.
Emission band
Spectral emission width of the LED; narrow for monochromatic LEDs.
Emission COB continuous
Continuous light without visible LED points from COB strips; dot-free.
Emission direct downward
LED light emitted directly toward the lower surface.
Emission indirect upward
LED light emitted toward the ceiling for diffuse reflection.
Emission Lambertian
Cosine light distribution; typical of LEDs without secondary optics.
Emission lateral (side-emitting)
LED strip with luminous emission perpendicular to the mounting surface; chips mounted on the side (e.g., SMD 335).
Emission of colored light
Colored LED light obtained with RGB or monochromatic chips.
Emission of white light
White LED light obtained from blue chips with conversion phosphor.
Emission order
Sending the purchase order for LED products to the supplier.
Emission profile luminous
Total luminous flux exiting the LED profile after diffuser losses.
Emission wavelength
Wavelength of LED chip emission; determines the color.
Emissivity
Emissivity of the LED profile surface; influences radiative heat exchange.
Emittance
Radiant power per unit surface area.
Emittance luminous
Luminous flux emitted per unit area from the LED diffuser surface.
Emitter
Element that emits light; the LED chip is the emitter of the strip.
Emitter (LED)
The LED chip that emits light; synonym of die or source.
EN 12193
European standard for sports facility lighting.
EN 12665
Standard on fundamental lighting terms and criteria.
EN 13032-1
Standard for photometric measurement of lamps and LED fixtures.
EN 13032-4
Standard for photometric measurement of LED modules.
EN 15193
Standard for energy requirements of building lighting.
EN 15193-1
Calculation of lighting energy consumption according to the standard.
EN 40
Standard for street lighting poles for LED fixtures.
EN 50171
Standard for centralized emergency power supply systems.
EN 50172
Standard for emergency lighting systems for escape routes.
EN 55015
Standard on electromagnetic emissions of LED fixtures.
EN 60061
Standard on lamp bases; relevant for LED retrofit.
EN 60529
Standard on IP protection degrees for LED fixture enclosures.
EN 60598-2-1
Standard for fixed general-use LED fixtures.
EN 60598-2-2
Standard for recessed LED fixtures.
EN 60598-2-22
Standard for emergency LED fixtures.
EN 61000-3-2
Standard on current harmonics of LED power supplies.
EN 61000-4-2
Standard on ESD immunity for LED fixtures.
EN 61000-4-5
Standard on surge immunity for LED drivers.
EN 61347-1
Safety standard for LED power supply devices.
EN 61347-2-13
Standard specific to constant-current and constant-voltage LED drivers.
EN 62384
Standard on performance of AC or DC LED drivers.
EN 62386-101
DALI standard part 101: general protocol.
EN 62386-102
DALI standard part 102: control devices.
EN 62386-207
DALI standard part 207: LED gear.
EN 62386-209
DALI standard part 209: device type 8 for color control.
EN 62471-1
Standard on photobiological safety of lamps and LED fixtures.
EN 62493
Standard on EMF assessment of LED fixtures.
EN 62717-1
Standard on performance of LED modules.
EN 62722-2-1
Standard on performance of LED fixtures.
EN 62776
Standard for LED tubes replacing fluorescent tubes.
Enamel coating
Enamel coating for LED profiles in decorative applications.
Encapsulated driver
LED driver encapsulated in resin for full IP protection.
Encapsulated LED
LED protected by a resin housing for environmental resistance.
Encapsulated LED strip
LED strip fully encapsulated in silicone or resin for IP67/68.
Enclosed fixture
LED fixture with closed enclosure limiting ventilation; requires derating.
Enclosure
Protective housing for power supply or controller; IP rating indicates protection level.
Enclosure rating
Protection rating of the LED power supply enclosure (IP20, IP65, IP67).
Enclosure temperature
Temperature inside the LED power supply enclosure.
Encoder (rotary)
Digital knob on LED controller for precise parameter adjustment.
End bell
End closure for circular tubes and LED profiles.
End cap
End cap of the LED profile, with or without cable gland hole for power cable exit.
End cap aluminum
Aluminum end cap matching the LED profile.
End cap with cable gland
End cap with gasket to maintain the profile’s IP rating.
End cap with hole
Perforated end cap for power cable passage to the LED strip.
End connector
Terminal connector for powering the LED strip at the end.
End feed
Powering the LED strip from the end; standard configuration.
End glow fiber
Optical fiber emitting only from the tip; for LED star ceilings.
End plate
End plate of the LED profile; synonym of end cap.
End seal
Terminal sealing of the LED strip for IP protection.
End splice
Terminal junction between LED strip and power cable.
End trim
Decorative finish of the LED profile end.
End user
Final user of the installed LED system.
End-of-life (EOL)
End of useful lifetime; luminous flux below L70 or L80 threshold.
End-of-line resistor
Termination resistor on DALI or DMX bus for correct operation.
End-to-end connection
Direct connection between two adjacent LED profiles without gap.
Endcap with cable hole
LED profile end cap with hole for cable passage.
Endcap without hole
Blind end cap of the LED profile; side without cable exit.
Endurance rating
Guaranteed component lifetime under specified conditions.
Endurance test
Extended duration test to verify LED component reliability.
ENEC (certification)
European safety certification for lighting fixtures; complements CE marking.
ENEC mark
European certification mark for LED fixtures.
Energy audit
Building energy analysis; LED lighting reduces consumption by 50–80%.
Energy bill reduction
Energy bill reduction achieved with LED lighting.
Energy certification
Building energy certification to which LED lighting contributes.
Energy class
EU energy classification of LED fixtures (A–G).
Energy code
Local energy code imposing power limits for LED lighting.
Energy code compliance
Compliance of the LED system with current energy codes.
Energy consumption
Total power drawn including power supply; expressed in kWh.
Energy consumption monitoring
Continuous monitoring of LED system energy consumption.
Energy efficiency directive
EU directive on energy efficiency as applied to LED lighting.
Energy efficiency ratio
Ratio between emitted lumens and watts consumed by the entire LED system.
Energy harvesting
Harvesting energy from the environment (light, vibrations) to power LED sensors.
Energy label
Mandatory EU energy label on LED fixtures.
Energy management system
Energy management system including LED lighting control.
Energy meter
Electrical energy meter to monitor LED system consumption.
Energy monitoring
Real-time monitoring of LED system energy consumption.
Energy payback
Time to recover LED investment in terms of energy savings.
Energy performance
Energy performance of the LED system: consumption, efficiency, savings.
Energy recovery
Energy recovery in advanced LED circuits to maximize efficiency.
Energy reduction target
Target for reducing energy consumption via LED lighting.
Energy report
Report on LED system energy consumption with analysis and recommendations.
Energy saving
Energy savings achieved with LED lighting compared to conventional sources.
Energy saving mode
Energy-saving mode with automatic LED brightness reduction.
Energy Star
U.S. certification for high energy efficiency LED fixtures.
Energy storage system
Energy storage system for powering LEDs from renewable sources.
Engagement lighting
Interactive LED lighting engaging users with effects and colors.
Engine room LED
LED lighting for machine rooms; resistant to vibrations and oils.
Engineered spectrum
LED spectrum engineered for specific applications (horticulture, museum, food retail).
Engineering drawing
Detailed technical drawing of the LED profile with dimensions and tolerances.
Engineering specification
Detailed engineering specification for the LED project.
Enhanced color rendering
Enhanced color rendering; R9 > 90 for saturated red.
Enhanced dimming
Advanced dimming with logarithmic curves and deep dimming down to 0.1%.
Enhanced spectrum LED
LED with enriched spectrum for better color rendering.
EnOcean
Energy-harvesting wireless protocol used in battery-free lighting control systems.
EnOcean sensor
Energy-harvesting wireless sensor compatible with EnOcean LED systems.
Entrance hall lighting
LED lighting for building lobbies and entrances.
Entrance lighting
LED lighting for building entrances and lobbies.
Entry angle
Incident angle of light into the diffuser; affects refraction and distribution.
Entry connector
Input connector for LED fixture power supply.
Envelope (curves)
Envelope curves defining safe LED operating parameters (SOA).
Environmental acidity
Environmental acidity level influencing the choice of LED materials.
Environmental compliance
Compliance of LED products with environmental regulations (RoHS, WEEE).
Environmental condition
Environmental conditions (temperature, humidity, dust) at the LED installation site.
Environmental control
Integrated management of LED lighting and building HVAC.
Environmental impact
Environmental impact of LED lighting over its complete life cycle.
Environmental protection
Protection of the LED system against environmental factors (water, dust, gases, UV).
Environmental rating
Environmental resistance classification: IP, IK, temperature.
Environmental sensor
Environmental sensor (light, temperature, humidity) for LED control.
Environmental test
Environmental resistance test (temperature, humidity, salt spray) on LED products.
Epistar chip
LED chip from Taiwanese manufacturer Epistar; wide range of packages.
Epitaxial growth
Epitaxial growth of semiconductor crystal for LED chip production.
Epitaxy
Crystalline growth process of semiconductors used to produce LED chips.
Epoch timer
Long-term programmable timer for cyclic control of LED lighting.
Epoxy (resin)
Thermosetting resin for encapsulation and sealing of LED components.
EPROM
Programmable memory in LED controller for scenes and configurations.
Equal energy spectrum
Spectrum with equal energy at every wavelength; theoretical reference.
Equal spacing
Equidistant layout of LED fixtures for uniform illuminance.
Equalization
Final adjustment of brightness or color between different strip segments for uniformity.
Equalization filter
Filter equalizing brightness differences along LED strips of different wavelengths.
Equi-flux surface
Surface on which LED luminous flux is uniform.
Equipment grounding
Grounding of LED equipment for electrical protection.
Equipment room lighting
LED lighting for technical rooms and equipment rooms.
Equivalent circuit
Equivalent electrical circuit of the LED for modeling and simulation.
Equivalent wattage
Equivalent wattage of conventional light sources for comparison with LEDs.
Ergonomic design
LED lighting design for user comfort and health.
Ergonomic lighting
LED lighting designed to reduce visual and physical fatigue.
ERP (ErP – Energy Related Products)
European directive setting energy efficiency requirements for energy-related products.
Error code
Error code displayed by controller or LED driver for diagnostics.
Error detection
Automatic detection of faults in the LED system (open circuit, short circuit).
Error margin
Measurement error margin in LED photometric and colorimetric measurements.
Escalator lighting
LED lighting for escalators and moving walkways.
Escape lighting
Emergency LED lighting indicating escape routes.
Escape route lighting
LED lighting of evacuation routes in case of emergency.
ESD protection (on the chip)
Integrated electrostatic discharge protection in the package.
ESP32 (controller)
Wi-Fi/Bluetooth microcontroller for LED control.
Ethernet
Wired network protocol used for DMX data transport (Art-Net, sACN) in complex LED installations.
Ethernet backbone
Main Ethernet wiring for Art-Net/sACN signal transport.
Ethernet controller
Ethernet-connected LED controller for remote management.
Ethernet gateway
Gateway converting LED protocols (DALI, DMX) to Ethernet.
Ethernet node
Ethernet-connected LED device for control and monitoring.
Ethernet switch managed
Managed switch for prioritized LED signal distribution.
Ethylene glycol
Antifreeze fluid used in cooling systems for very-high-power LEDs.
ETS (KNX)
Engineering Tool Software for programming KNX-LED systems.
ETSI
European Telecommunications Standards Institute; defines standards for Zigbee and Bluetooth used in lighting.
EU Ecolabel
European ecological label for LED products with low environmental impact.
EU regulation 2019/2020
European regulation on efficiency requirements for LED light sources.
Eulumdat (file)
European photometric file format (.ldt) for lighting calculation software.
European Article Number (EAN)
Barcode for unique identification of LED products.
European dimming standard
European LED dimming standard: DALI IEC 62386.
European safety mark
European safety mark (CE, ENEC) for LED products.
EVA (Ethylene Vinyl Acetate)
Material for transparent encapsulation of LED strips.
Evaluation board
Evaluation board for testing LED chips and drivers before production.
Evaluation kit
Evaluation kit with LED strip and accessory samples for testing.
Evanescent wave
Evanescent wave in total internal reflection; basis of LED light guides.
Evaporative cooling
Evaporative cooling in special LED systems.
Evaporative cooling system
Evaporative cooling system for very-high-power LEDs.
Even illumination
Uniform illuminance across the entire LED target surface.
Evenly spaced
LEDs evenly spaced on the strip for homogeneous lighting.
Event lighting
Temporary LED lighting for events, trade shows, and exhibitions.
Eveready
Power supply with integrated emergency circuit maintaining LED lighting during blackouts.
Everlight chip
LED chip from Everlight Electronics for professional strips.
Evolution of LED technology
Technological advancements in LED efficiency and functionality.
Example calculation
Case study of LED lighting calculation as reference.
Example installation
Photo or diagram of a realized LED system as reference.
Excavation LED light
Portable LED lighting for excavation works and construction sites.
Excess heat
Excess heat generated by LEDs to be dissipated via profile and ventilation.
Excitation wavelength
Wavelength exciting the phosphor in the LED; typically 450 nm (blue).
Excited state
Energy state of the electron in the LED before photon emission.
Exhaust fan integration
Integration of LED lighting with extractor fans in bathrooms and kitchens.
Exhaust LED
LED fixture combined with air extractor for bathrooms and kitchens.
Exhaust LED fan
Extraction fan with integrated LED light for bathrooms and kitchens.
Exhibition lighting
LED lighting for exhibitions and displays; high CRI and UV protection.
Existing installation
Existing system to be upgraded with LED technology.
Exit light
LED fixture with signage for emergency exits.
Exit path lighting
LED lighting of the evacuation path in case of emergency.
Exit sign
LED-illuminated exit sign for emergencies.
Expandable system
Modular LED system expandable with additional components.
Expansion bolt
Expansion anchor for mounting LED profiles on masonry.
Expansion coefficient
Thermal expansion coefficient of LED profile materials.
Expansion joint
Expansion joint between adjacent LED profiles to accommodate thermal expansion.
Expansion module
Additional module to expand LED controller functionality.
Expected life
Expected LED component lifetime in operating hours.
Exploded view
Exploded view of an LED profile showing all separate components.
Explosion-proof enclosure
ATEX-certified enclosure for LED power supplies in hazardous areas.
Explosion-proof LED
LED fixture certified for use in potentially explosive atmospheres (ATEX).
Exponential dimming
Exponential dimming curves for very smooth transitions.
Export packaging
Reinforced packaging for international shipping of LED products.
Export regulations
Export regulations for LED products to different international markets.
Exposed beam LED
LED strip mounted on exposed surface-mounted beams for decorative lighting.
Exposed brick LED
Grazing LED lighting on exposed brickwork to highlight texture.
Exposed wiring
Surface-mounted wiring; industrial style for decorative LED installations.
Exposure limit
Exposure limit to LED light for photobiological safety.
Extended gamut
Extended color gamut achieved with RGBA or multichannel LEDs.
Extended gamut LED
LED with extended color gamut thanks to special phosphors or multichannel design.
Extended warranty
Warranty extended beyond the standard period offered by the LED manufacturer.
Extension bracket
Extension bracket to space the LED profile away from the surface.
Extension cable
Extension cable with pre-installed connectors.
Extension cord
Electrical extension cord to connect distant LED power supplies to outlets.
Extension profile
Additional LED profile section to reach the required length.
Exterior application
LEDs for outdoor spaces: gardens, facades, pathways, pools.
Exterior cove
Outdoor cove for LED strips protected from weather.
Exterior downlight
IP-rated outdoor LED downlight certified for exterior use.
Exterior emergency
Emergency LED lighting for outdoor areas.
Exterior grade
LED component rated for outdoor use.
Exterior IP65 strip
LED strip with IP65 protection for covered outdoor installations.
Exterior IP67 strip
LED strip with IP67 protection for exposed outdoor installations.
Exterior profile
LED profile designed for outdoor installation with weather protection.
Exterior recessed LED
Recessed LED fixture for outdoor floors and walls.
Exterior wall LED
Wall-mounted LED fixture for outdoor facade lighting.
External antenna
External antenna to improve wireless LED controller range.
External ballast
External ballast; in LED systems replaced by external driver.
External control input
Input for external control signals on the LED driver.
External dimming signal
Dimming signal from an external device to the LED driver.
External driver
Power supply separate from the fixture.
External fuse
External fuse for additional LED circuit protection.
External heat sink
Additional external heat sink for LEDs in critical thermal conditions.
External power supply
Power supply separate from the LED fixture.
External sensor
Sensor mounted externally to the LED fixture.
External trigger
Input for activation from an external sensor.
Externally dimmable
LED driver dimmable via external signal (0–10V, DALI, PWM).
Extra flat profile
LED profile with extremely low height for minimalist installations.
Extra long strip
LED strip in rolls longer than the standard 10 m; for extensive installations.
Extra low profile
LED profile with thickness less than 7 mm.
Extra-low voltage (ELV)
Extra-low voltage; LED strips operate in ELV mode.
Extra warm white (2200K)
Very warm CCT; candlelight-type ambiance.
Extraction efficiency
Efficiency of photon extraction from the LED chip to the outside.
Extreme cold LED
LED strip designed for operation below –30°C.
Extreme heat LED
LED strip designed for operation above 60°C.
Extreme temperature LED
Strip for extreme conditions (–40°C to +80°C).
Extruded acrylic
Extruded PMMA; more economical than cast, used for standard LED diffusers.
Extrusion
Production process forming aluminum profiles by pushing material through a die.
Extrusion custom
Aluminum profile with custom cross-section designed for specific project needs.
Extrusion die
Die through which molten aluminum is pushed to form the LED profile.
Extrusion length
Standard length of extruded bar before cutting to size.
Extrusion tolerance
Dimensional tolerance of extruded LED profile; typically ±0.1 mm.
Eye bolt
Eye bolt for suspending heavy LED profiles from the ceiling.
Eye comfort
Absence of glare, flicker, and annoying shades.
Eye safety
Ocular safety according to EN 62471.
Eye-level lighting
LED lighting positioned at eye height; for mirrors and displays. ↑ Back to top
F
Fabric diffuserDiffuser made of technical fabric for LED profiles with a soft and decorative effect.
Fabrication drawing
Manufacturing drawing of the LED profile with production specifications.
Fabrication tolerance
Manufacturing tolerance of the LED profiles in extruded aluminum.
Facade (lighting of)
LED lighting of building facades for nighttime architectural enhancement.
Facade continuous LED
LED lighting integrated into continuous glass and aluminum facades.
Facade illuminata LED
Building facade enhanced with nighttime LED lighting.
Facade lighting
LED lighting of building facades.
Facade media LED
Facade with integrated LED display for multimedia content.
Facade ventilata LED
LED strip behind the ventilated facade for a nighttime halo effect.
Face mount
Front mounting of the LED profile on the surface with surface-mounted screws.
Face plate
Front plate of wall-mounted dimmer or controller.
Faceted reflector
Faceted reflector for controlled and uniform light distribution.
Factor K (magnetotermico)
Factor for sizing the thermal-magnetic circuit breaker with LED power supplies.
Factor of aging LED
Reduction of luminous flux over time; considered in the maintenance factor (MF).
Factor of correzione of the flux
Coefficient that accounts for losses in the LED fixture.
Factor of correzione temperature
Coefficient that accounts for ambient temperature in LED calculations.
Factor of declassamento
Reduction of LED power supply output at elevated temperatures.
Factor of flux direct
Percentage of LED flux that directly reaches the work surface.
Factor of forma spectral
Description of the shape of the LED emission spectrum.
Factor of load
Ratio between the actual LED load and the nominal power supply rating.
Factor of maintenance
Coefficient that accounts for the reduction of luminous flux over time for lighting calculations.
Factor of maintenance overall
Product of the LED aging, dirt accumulation, and survival factors.
Factor of maintenance LED
MF value used in calculations to compensate for LED degradation over time.
Factor of reduction flux
Coefficient that accounts for optical losses in the LED system.
Factor of reflection
Percentage of light reflected from a surface; essential for indirect lighting calculations.
Factor of safety power supply
Extra power margin of the LED power supply; typically 20-30%.
Factor of sopravvivenza
Percentage of LEDs still functioning at the end of useful lifetime.
Factor of sporcamento diffuser
Reduction of flux due to dust accumulation on the LED diffuser.
Factor of utilizzazione
Ratio between useful luminous flux and total flux emitted by the fixture.
Factor thermal LED
Thermal considerations in the choice of LED profile for heat dissipation.
Factory default
Factory settings of the LED controller; restorable after customization.
Factory reset
Reset to factory settings of the LED controller.
Fade rate
Speed of brightness or color transition during LED dimming.
Fade time
Transition time in LED dimming; programmable in the controller.
Fade-out
Gradual switching off of the LED; soft transition from on to off.
Fade-to-black
Gradual transition from brightness to complete LED shutdown.
Fail-open
Failure mode in which the LED remains on; for safety lighting.
Fail-safe
Function that maintains LED operation in case of controller failure.
Falegname (collaborazione)
Coordination with the carpenter for milling housings for LED profiles.
False ceiling (lighting to)
Installation of LED profiles in suspended ceilings to achieve diffused, recessed or indirect lighting.
False ceiling Armstrong
Modular suspended ceiling system compatible with panels and LED profiles.
False ceiling in doghe
Batten-type suspended ceiling with possibility of LED profile integration.
False ceiling in network
Open-grid suspended ceiling with integrated LED fixtures.
False ceiling REI
Fire-rated suspended ceiling; LED profiles must comply with the fire classification.
False ceiling slot
Slot in the suspended ceiling for inserting recessed LED profiles.
False ceiling to doghe LED
Batten-type suspended ceiling with integrated LED profiles.
False ceiling to quadrotti LED
Modular panel suspended ceiling with LED integration.
False start
Momentary involuntary LED switching on; caused by interference on the dimmer.
Falso quadro LED
LED panel that simulates a window with natural daylight.
Fan coil and LED
Coordination between fan coil units and LED lighting in the building system.
Fan coil integration
Integration of LED lighting with fan coil air conditioning systems.
Fan-out (wiring)
Cable distribution from a central point to multiple strips.
FAQ LED products
Frequently asked questions about LED products with technical answers.
Far field
Far field of LED light distribution; where the beam is stable.
Farad rating
Capacitance in Farads of the capacitors in the LED power supply.
Faretti adjustable LED
Adjustable LED spotlights on track or articulated arms for accent lighting.
Faretto from outdoor LED
LED spotlight with IP protection rating for outdoor lighting.
Faretto adjustable recessed
Recessed LED spotlight with adjustable beam orientation.
Faretto recessed LED
LED spotlight for installation in suspended ceilings; downlight.
Farmacia LED
LED lighting for pharmacies; high CRI and regulatory compliance.
Fascetta for cables LED
Nylon cable tie for orderly bundling of LED cables.
Fascetta inox
Stainless steel cable tie for securing LED cables in aggressive environments.
Fascetta nylon
Nylon cable tie for bundling LED cables.
Fascia luminous
Horizontal architectural element with integrated LED strip.
Fashion lighting
LED lighting for fashion stores; high CRI and dynamic CCT to enhance fabrics.
Fast blow fuse
Fast-blow fuse for overcurrent protection in LED circuits.
Fastener
Generic mounting hardware for LED profiles.
Faston
Blade connector for quick connections in power supplies and industrial LED systems.
Fat beam
Wide and powerful LED beam for illuminating large areas.
Fatigue crack
Fatigue crack in LED profile from repeated thermal stress; prevented with adequate design.
Feasibility of the project LED
Assessment of the technical and economic feasibility of the LED system.
Fattura proforma LED
Preliminary commercial document for ordering LED products.
Fatturazione energy LED
Energy consumption metering of the LED system.
Fault detection
Automatic fault detection in the LED system with signaling.
Fault indicator
Indicator that signals a fault in the LED system.
Fault log
Log of faults stored by the LED controller for maintenance analysis.
Fault tolerance
Capacity of the LED system to continue operating with failed components.
FCC (certification)
American certification of electromagnetic compatibility for electronic devices including LEDs.
Feathered beam
LED beam with feathered edges for soft transition between lit and dark areas.
Feathering
Gradual fading of LED light at the beam edges.
Feature lighting
LED lighting that highlights a specific architectural element.
Feed-in (point of power supply)
Point where the cable connects to the LED strip.
Feedback control
Feedback control based on light sensor to maintain target LED light level.
Feedback loop
Feedback circuit in the LED driver to stabilize current and voltage.
Feedback of the customer LED
Customer feedback on the installed LED system.
Ferramenta for LED profiles
Metal hardware for mounting LED profiles: screws, clips, anchors.
Festone LED
Decorative LED string lights for events and holidays.
FET (transistor)
Component in the LED driver and trailing-edge dimmer.
Fiber bundle
Bundle of optical fibers illuminated by an LED source for decorative effects.
Fiber optic illuminator
LED source coupled to a bundle of optical fibers.
Fiber optics
Transparent filament that transports light; used as an alternative to LEDs for decorative point lighting.
Fiber optics end-glow
Fiber that emits light at the end; for starry ceiling effects.
Fiber optics for cielo stellato
Bundle of optical fibers illuminated by an LED source for starry effects.
Fiber optics PMMA
PMMA fiber optics for decorative LED lighting.
Fiber optics side-glow
Fiber that emits light along its length; for decorative luminous lines.
Fiche technique LED
Concise LED product datasheet with key parameters.
Fidelizzazione of the customer LED
Strategies for maintaining customer satisfaction with LED products over time.
Field adjustable
LED driver parameter adjustable on-site after installation.
Field adjustable driver
LED driver with output current adjustable on-site via selector.
Field angle
Beam angle measured at 10% of peak intensity; wider than the beam angle.
Field installation
Installation of the LED system at the site or final location.
Field programmable
LED controller programmable directly on-site via interface.
Field replaceable
LED component replaceable on-site without special tools.
Field wiring
On-site wiring to connect LED system components.
Filament LED
LED technology that mimics the appearance of traditional filament lamps; not related to LED strips.
Filament LED strip
LED strip that mimics the aesthetic appearance of filament lamps.
Filament style LED
LED lamp that mimics the aesthetics of incandescent filaments.
File BIM LED profile
3D BIM object of the LED profile for integration in Revit or ArchiCAD.
File CAD LED profile
2D/3D drawing of the LED profile for design purposes.
File DWG LED profile
AutoCAD file of the LED profile for architectural design.
File IES for LED strip
IES photometric file of the light distribution of the LED strip within the profile.
File IES LED fixture
IES photometric file of the LED fixture for simulation in DIALux.
File LDT for LED profile
Eulumdat photometric file of the LED profile's light distribution.
File LDT LED fixture
Eulumdat photometric file of the LED fixture for simulation.
File STEP LED profile
3D model of the LED profile in STEP format for CAD.
Filettatura M3
M3 metric thread for screws used to fix LED clips.
Filettatura M4
M4 metric thread for screws used to fix LED brackets.
Fill factor
Ratio of luminous area to total area; very high in COB LEDs.
Film anti-condensa
Film applied to the LED diffuser to prevent fogging.
Film anti-graffio
Protective film on the LED diffuser against scratches and abrasions.
Film anti-riflesso
Film that reduces reflections on the LED diffuser.
Film LED
Ultra-thin film with integrated micro-LEDs for flexible luminous surfaces.
Film of diffusione
Optical film applied to the diffuser to improve light uniformity without excessive loss.
Film of protection
Removable protective film applied at the factory on the LED profile.
Film optical of diffusione
Film that improves the uniformity of LED light through the diffuser.
Film protettiva profile
Removable film applied at the factory to protect the LED profile during transport.
Film resistor
Thin-film resistor on the LED strip for current limiting.
Film retroriflettente
Film that reflects LED light back toward the source; for optical efficiency.
Filter anti-armoniche
Filter that reduces harmonics generated by the LED driver on the mains network.
Filter anti-insetti
Shielding with amber LED spectrum that does not attract insects.
Filter anti-UV
Material in the diffuser that blocks ultraviolet components.
Filter color interchangeable
Interchangeable colored sheet placed in front of the LED source.
Filter dicroico
Optical filter that selectively reflects certain wavelengths.
Filter EMI
Filtering of electromagnetic interference at the power supply input.
Filter holder
Holder for colored filters placed in front of the LED source.
Filter IR-cut
Filter that blocks infrared components in the LED beam.
Filter LC of output
Inductor-capacitor (LC) filter on the LED driver output.
Filter of color for LED
Gel or colored sheet applied in front of the LED source.
Filter of input
EMI filter at the input of the LED power supply.
Filter of network
EMI filter at the input of the LED power supply for regulatory compliance.
Filter of output
Filter on the LED driver output side to reduce ripple.
Filter optical dichroico
Filter that selectively reflects certain wavelengths from the LED source.
Filter passa-band LED
Optical filter that transmits only a specific range of wavelengths from the LED.
Filter passa-low
Filter that allows only low frequencies to pass; for filtering LED PWM signals.
Filter UV-cut
Filter that blocks ultraviolet components in LED light.
Fin (fin)
Heat sink fin that increases the thermal exchange surface area.
Final circuit
Final electrical circuit that directly powers the LED fixtures.
Final inspection
Final inspection of the LED product before shipment.
Financing LED
Financing options for LED lighting investments.
Financing LED system
Financing option for purchasing the LED system.
Fine pitch LED
LED display with very fine pixel pitch for high resolution.
Fine tuning
Precision adjustment after installation.
Finger joint
Finger joint between LED profiles for non-standard angles.
Finish (of the profile)
Surface finish of the LED profile: natural anodized, black anodized, white painted, custom RAL.
Finish aluminum raw
LED profile without surface treatment; natural aluminum.
Finish aluminum natural
Surface of the LED profile without treatment; silver color.
Finish anodized champagne
Champagne-colored finish for LED profiles in elegant environments.
Finish anodized copper
Copper-colored finish for LED profiles in vintage and industrial styles.
Finish anodized natural
Treatment that preserves the silver color of aluminum with anti-corrosion protection.
Finish anodized black
Surface treatment of the aluminum profile with black oxidation; discreet aesthetics for dark environments.
Finish anodized titanium
Titanium-colored finish for LED profiles in modern environments.
Finish anti-fingerprint
Resistant to fingerprints on surface-mounted profiles.
Finish black matte
Matte black paint finish on the LED profile; elegant and discreet.
Finish brass
Gold/brass finish on profiles for classic and luxury environments.
Finish brushed
Surface treatment with linear texture; brushed steel effect.
Finish chrome
Glossy chrome finish on LED profiles for designer environments.
Finish coordinata profile
LED profile finish chosen to coordinate with surrounding furniture.
Finish corten
Decorative rust effect on LED profiles for industrial styles.
Finish effect concrete
Finish that simulates raw concrete on LED profiles for industrial style.
Finish effect wood walnut
Finish that simulates walnut wood on LED profiles.
Finish effect wood oak
Finish that simulates oak wood on LED profiles.
Finish effect wood wenge
Finish that simulates dark wenge wood on LED profiles.
Finish gray anthracite
Dark gray paint finish on the LED profile; for modern design.
Finish lacquered glossy
Mirror-glossy finish on LED profiles; lacquered effect.
Finish lacquered matte
Matte lacquered finish on LED profiles; elegant and discreet.
Finish matt
Matte finish; reduces reflections.
Finish micro-sandblasted
Finish with micro-sandblasting on LED profiles; delicate texture.
Finish nickel brushed
Brushed nickel finish on LED profiles.
Finish of the diffuser
Surface finish of the cover: opal, frosted, transparent, prismatic.
Finish of the profile custom
Painting of the LED profile in RAL color upon request.
Finish of the profile to catalog
Standard finishes available for the LED profile: natural, black, white.
Finish on sample
Painting of the LED profile in a specific color provided by the customer.
Finish pewter
Pewter-colored finish on LED profiles for classic environments.
Finish RAL
Painting of the profile in a specific RAL color for integration with furniture.
Finish RAL 7016
Anthracite gray; RAL finish highly requested for outdoor LED profiles.
Finish RAL 9003
Pure white; standard RAL finish for LED profiles coordinated with ceilings.
Finish RAL 9005
Matte black; RAL finish for LED profiles in designer environments.
Finish RAL 9010
Warm white; RAL finish for LED profiles in residential environments.
Finish RAL 9016
Traffic white; RAL finish for LED profiles in offices and commercial spaces.
Finish to dust
Thermosetting powder coating of the LED profile; durable and uniform.
Finish to mirror
Highly reflective surface of the LED profile.
Finish white
White powder coating of the profile; integrates with light surfaces and increases indoor reflectance.
Finish white milk-white
Matte white paint finish on the LED profile; coordinated with ceilings.
Finishes available LED profile
List of catalog finishes available for the LED profile.
Fire barrier
Fire barrier in ceiling penetrations for recessed LED profiles.
Fire classification
Fire classification of the profile and LED diffuser materials.
Fire rated ceiling
Fire-rated suspended ceiling into which LED profiles are integrated.
Fire rated profile
LED profile compliant with the fire safety requirements of the suspended ceiling.
Fire rating
Fire resistance classification of LED profiles and components.
Fire resistance rating
Duration of fire resistance of an LED profile under fire conditions.
Fire retardant
Flame-retardant material used in LED housings and diffusers.
Fire stop
Fire-resistant sealant for LED cable penetrations through walls and floors.
Fire stopping
Fire sealing of the recess hole for the LED profile in the suspended ceiling.
Fire-rated
Fire resistance classification for LED profiles and accessories installed in REI-rated suspended ceilings or walls.
Fire-rated downlight
LED downlight with integrated fire seal for suspended ceilings.
Firmware
Operating software of the LED controller.
Firmware update
Software update for the controller.
First article inspection
First article inspection to verify compliance with LED specifications.
Fish eye lens
Extreme wide-angle lens for ultra-wide LED light distribution.
Fisheye lens
Extreme wide-angle lens used in special LED fixtures.
Fitting
Mounting accessory for fixtures and LED profiles.
Fitting corner profile
Element that connects two LED profiles at an angle.
Fitting ceiling-mounted
Mounting system for anchoring the LED profile to the ceiling.
Fitting curvo profile
Curved element that connects two LED profiles in a curve.
Fitting flexible
Flexible element for connecting LED profiles on irregular surfaces.
Fitting M10/M12
Metric threading for mounting LED fixtures on brackets and supports.
Fitting quick
Mechanical connection system without screws for quick fixing of profiles, covers, or clips.
Fitting to croce profile
Element that connects four LED profiles in a cross configuration.
Fitting to T profile
Element that connects three LED profiles in a T-configuration.
Fitting universal
Mounting system compatible with different support types.
Five-channel controller
Five-channel controller for RGBCCT LED strips.
Five-wire system
Five-wire system for RGBW strips (common + R + G + B + W).
Fixed beam
LED beam with fixed, non-adjustable angle.
Fixed bracket
Fixed mounting bracket for LED profiles.
Fixed CCT
Strip with fixed, non-adjustable CCT.
Fixed installation
Permanent installation of the LED system; not temporary.
Fixed output driver
Power supply with fixed, non-adjustable output.
Fixing adhesive strip
Application of the LED strip to the surface using double-sided tape on the back.
Fixing clip profile
Mounting of the LED profile via clips screwed to the surface.
Fixing insert
Internal inserts in an LED profile for mechanical fixing of components.
Fixing to glue profile
Mounting of the LED profile with structural adhesive on the surface.
Fixing to screw profile
Mounting of the LED profile with screws through the mounting clip.
Fixture
International synonym for complete LED fixture.
Fixture efficacy
Efficacy of the entire fixture including losses.
Fixture ID
Unique identifier of the LED fixture in the management system.
Fixture of lighting
Complete assembly of LED source, driver, optics, enclosure, and mounting.
Flagpole light
LED lighting for flagpoles and flags.
Flame effect LED
Strip that simulates a flickering flame effect.
Flame retardant cable
Cable with flame-retardant sheath for fire safety.
Flame spread index
Flame spread index of the LED profile materials.
Flange (flangia)
Projecting edge for fixing or supporting the diffuser.
Flange mounting
Mounting via flange screwed to the surface.
Flange nut
Flanged nut for fixing LED fixtures with gasket.
Flangia of bloccaggio
Edge of the LED profile that locks the diffuser in the housing.
Flangia of recess
Edge of the LED profile that covers the edge of the recess hole.
Flangia of support
Edge of the LED profile that rests on the mounting surface.
Flap (fin)
Adjustable fin on LED fixtures for beam adjustment.
Flash memory
Non-volatile memory in the LED controller for storing scenes and configurations.
Flashing (lampeggio)
Effect with rapid on/off flashing.
Flat beam
Flat and wide LED beam; asymmetric distribution for wall-washing.
Flat bottom profile
LED profile with flat base for stable mounting on flat surfaces.
Flat lens
Flat lens for ultra-thin LED profiles.
Flat panel LED
Ultra-thin LED panel for ceiling-mounted lighting.
Flat profile
LED profile with minimized height; for ultra-thin installations.
Flat terminal accessory
Flat end cap for slim LED profiles.
Flex circuit
See FPCB. Flexible circuit for LED strip.
Flex connector
Flexible connector on small printed circuit for connecting LED strips in tight curves.
Flex PCB
Flexible printed circuit for LED strip.
Flex track
Flexible track for LED spotlights on curved paths.
Flexibility (strip)
Ability to bend and adapt to curves.
Flexibility of installation
Ability of the LED system to adapt to different mounting configurations.
Flexibility of the strip
Ability of the LED strip to bend to adapt to curved surfaces.
Flexibility produttiva LED
LED manufacturer's ability to adapt to customized requests.
Flexible arm LED
LED lamp with adjustable flexible arm for task lighting.
Flexible circuit
See FPCB. Flexible printed circuit for LED strip.
Flexible conduit
Corrugated tube for mechanical protection of LED cables.
Flexible LED panel
Flexible LED panel suitable for curved surfaces.
Flexible neon
See LED neon flex. Flexible tube that simulates neon.
Flexible profile
Flexible LED profile in silicone or aluminum for curves and arches.
Flexographic printing
Flexographic printing for applying markings and logos on LED strips.
Flicker (sfarfallio)
Rapid and repetitive variation in perceived brightness; caused by low-frequency PWM dimming or poor-quality drivers.
Flicker Index
Quantitative parameter of light flicker; lower values indicate better light stability.
Flicker metric
Standardized metric for quantifying LED flicker.
Flicker percentage
Peak-to-peak percentage variation in brightness.
Flicker test
Test measuring LED light flicker according to IEC standards.
Flicker-free
Characteristic of drivers and LED strips that operate without perceptible flicker; important for visual comfort and video recording.
Flight case
Protective flight case for transporting controllers and LED fixtures.
Flip LED chip
LED with die mounted face-down for better thermal dissipation.
Flip-chip LED
LED die mounted upside-down on the substrate for improved heat dissipation.
Float glass
Float glass used for high-quality LED diffusers.
Floating effect
Visual floating effect created by LED strips hidden behind furniture or panels.
Floating mount
Mounting system that creates a suspended effect for the LED profile.
Floating shelf light
LED lighting integrated into shelves that appear to float in space.
Flood (inondazione luminous)
Wide and uniform light distribution; typical of LED strips with emission angle ≥120°.
Flood beam
Wide and uniform beam for illuminating large areas.
Floodlight LED
Floodlight with wide beam for outdoor areas.
Floor channel
Floor channel for housing cables and LED strips.
Floor guide light
Floor-mounted LED light for guiding paths in dark environments.
Floor lighting
LED lighting integrated into the floor via walkable profiles for pathways or scenic effects.
Floor marker LED
Recessed LED floor marker for pathway indication.
Floor recessed LED
Floor-recessed fixture; walkable.
Floor standing lamp LED
Floor-standing lamp with LED source.
Floor standing LED
Floor-standing LED fixture, torchiere type.
Floor wash effect
Effect of LED light spreading onto the floor from the edge of a wall-mounted fixture.
Floor washer
LED fixture that illuminates the floor with grazing light.
Flow rate
Flow rate of cooling fluid in liquid-cooled LED systems (rare, high power).
Fluorescence
Emission from material stimulated by UV LEDs.
Fluorescent replacement
Replacement of fluorescent tubes with LEDs.
Fluorescent retrofit
Retrofitting of fluorescent ceiling fixtures to LED lighting.
Fluoropolymer
Fluoropolymer with high chemical and thermal resistance for special LED cables.
Fluoropoly polymer cable
Cable with fluoropolymer insulation for high chemical and thermal resistance.
Flush box
Recessed box for housing compact LED power supplies.
Flush cut
Flush cutting of the LED profile surface for a perfect finish.
Flush diffuser
Diffuser flush with the profile surface; no protrusions.
Flush mount
Flush mounting; profile that does not protrude.
Flush trim
Edge of the LED profile flush with the surrounding surface.
Flux bin
Luminous flux category in LED chip binning.
Flux bin code
Code identifying the luminous flux category of the LED batch.
Flux binning
Classification of LED chips into homogeneous luminous flux groups during production.
Flux density
Luminous flux density per unit of LED emitting area.
Flux efficace LED
Actual LED luminous flux after optical and thermal losses in the system.
Flux emisferico lower
LED flux emitted in the lower hemisphere; useful for illuminance.
Flux emisferico upper
LED flux emitted in the upper hemisphere; should be minimized to reduce light pollution.
Flux in output from the profile
Effective lumens after diffuser loss; useful flux of the LED profile.
Flux iniziale LED strip
Luminous flux of the LED strip measured after the first 100 hours.
Flux mantenuto LED strip
Luminous flux of the LED strip at the end of useful lifetime (L70).
Flux netto LED profile
Luminous flux output from the LED profile after diffuser losses.
Flux of the LED strip for metro
Lumens emitted by the LED strip per linear meter; key parameter.
Flux output ratio
Ratio between flux emitted by the fixture and total LED flux.
Flux radiante
Total radiant power emitted by the LED; in Watts.
Flux radiante spectral
Radiant power per unit wavelength; for the LED spectrum.
Flux specific for watt
Luminous flux per Watt of absorbed power; LED efficacy.
Flux stabilization
Stabilization of LED luminous flux after the initial hours of operation.
Fly lead
Short pre-soldered cable on the strip for connection.
Fly wire
Short flying lead for quick connection of LED components.
Flyback converter
Converter topology used in isolated low-power LED drivers.
Foam mounting pad
Foam pad for cushioned mounting of LED strips.
Foam tape
Double-sided foam tape for irregular surfaces.
Focal plane
Plane on which the LED beam converges through a lens.
Focal point
Focal point of an LED lens where light rays converge.
Fog machine LED
Smoke machine with integrated LED light for scenic effects.
Fog resistant
LED fixture resistant to fog; for outdoor lighting.
Foglio tecnico LED strip
Concise document with the main parameters of the LED strip.
Foldback protection
Current reduction when the driver exceeds the temperature limit.
Folded optic
LED optics with folded light path for compact fixtures.
Follow spot LED
LED follow spot for stage lighting.
Font lighting
LED lighting for baptismal fonts; IP68 required.
Fonte luminous LED
Any source that uses LED technology to emit light.
Food display lighting
LED lighting specifically for food displays with optimized spectrum.
Food lighting application
LEDs calibrated to enhance the appearance of food in display cases and counters.
Food retail lighting
LEDs for supermarkets with spectrum optimized for meat, fish, and fruit.
Food safe (material)
Approved for indirect contact with food.
Foot pedal dimmer
Foot pedal dimmer for hands-free control of LED brightness.
Foot-lambert
Anglo-Saxon unit of luminance; 1 fL = 3.426 cd/m².
Footcandle (fc)
Anglo-Saxon unit of illuminance; 1 fc = 10.764 lux.
Footprint luminous
Area illuminated by the LED beam on a target surface.
Forbici from elettricista
Electrician's scissors with insulated blades for cutting cables and LED strips.
Force curing
Accelerated curing of adhesives and sealants with UV LEDs.
Forced air cooling
Forced-air cooling with fan for very-high-power LEDs.
Forced ventilation
Forced ventilation for cooling very-high-power LEDs.
Form factor
Dimensions and form factor of the LED package or power supply.
Forma of the beam LED
Geometry of the luminous cone emitted by the LED fixture.
Forma of the section profile
Geometry of the LED profile's cross-section: U, V, rectangular, circular.
Format of confezionamento strip
Presentation of the LED strip: reels of 5m, 10m, 20m, or cut to measure.
Format of the reel strip
Length of LED strip per reel: 5 m, 10 m, 20 m standard.
Forward current (If)
Direct current flowing through the LED; operating parameter.
Forward voltage (Vf)
Voltage drop across the LED; typically 2.8-3.5V.
Foto of referenza LED
Images of completed LED installations for portfolio purposes.
Foto of the installation LED
Photographic documentation of the completed LED system.
Fotocellula LED
Light sensor for twilight control of LED lighting.
Fotodiodo
Light-sensitive diode used in sensors for LED control.
Fotone
Elementary particle of light emitted from the LED chip during recombination.
Fotoresistenza (LDR)
Sensor whose resistance varies with light; for LED control.
Fotovoltaico for LED
Solar panel that powers an autonomous off-grid LED system.
Foundation bolt
Foundation bolt for securing LED lighting poles.
Fountain luminous LED
Fountain with underwater LED lighting for chromatic effects.
Four-channel controller
Four-channel LED controller with independent channels; typical for RGBW.
Four-wire system
Four-wire system for RGB strips: one common and three color channels.
Foyer LED
LED lighting for theater and hotel lobbies.
FPCB (Flexible Printed Circuit Board)
Flexible printed circuit in copper/polyimide that forms the support for flexible LED strips.
FPCB double copper
Strip with double-layer copper PCB; lower resistance and better heat dissipation.
FPCB single copper
Strip with single-layer PCB; standard for economical strips.
FR4 (substrato)
Epoxy glass fiber substrate for rigid PCBs of LED controllers.
Frame (telaio)
Support structure for large-dimension LED panels.
Frame rate
Update frequency of the addressable LED controller; in fps.
Framing projector
LED projector with framing shutters to define the beam contour.
Freccia of inflessione
Maximum deflection of a long LED profile suspended between two supports.
Free air rating
Current carrying capacity of LED cable in free air.
Free standing profile
Self-supporting LED profile that does not require a mounting surface.
Free-form optic
Optics with shaped surfaces for customized light distributions.
Freestanding LED
Freestanding LED fixture that does not require wall or ceiling mounting.
French cleat
French cleat mounting system for heavy LED profiles.
Frequency (light)
Frequency of the LED light wave; related to wavelength.
Frequency band
Frequency band of the wireless signal for LED control.
Frequency hopping
Frequency hopping in wireless LED protocols to avoid interference.
Frequency modulation
Frequency modulation of the signal for LED control.
Frequency of cutting
Cutoff frequency of the filter that separates the useful signal from noise in the LED driver.
Frequency of lampeggio
Number of flashes per second of a signaling LED.
Frequency of maintenance LED
Interval between scheduled maintenance interventions for the LED system.
Frequency of network 50 Hz
Frequency of the European electrical grid; the LED power supply converts it to DC.
Frequency of network 60 Hz
Frequency of the American electrical grid; compatible with universal LED power supplies.
Frequency of switching
Switching frequency of the LED driver; typically 50-500 kHz.
Frequency of update
Data refresh rate on addressable LED strips; in Hz.
Frequency PWM
Number of cycles per second of the PWM signal; frequencies ≥1 kHz avoid perceptible flicker.
Fresa for LED profile
Rotary tool for creating the recess housing for the LED profile.
Fresa to tazza
Cylindrical drill bit for drilling large diameters for LED downlights.
Fresnel lens array
Array of miniature Fresnel lenses for controlling the LED beam.
Fresnel reflection
Partial reflection of light at the interface between two materials with different refractive indices.
Friction fit
Insertion of the diffuser into the profile by friction fit; without clips or adhesive.
Front emission
Emission from the front face; standard configuration.
Front glass
Protective front glass in outdoor LED fixtures.
Front loading
Front-loading insertion of the strip and diffuser into the LED profile.
Frontale luminous
Front-lit panel with LED strip for signs and signage.
Frost (effect ghiaccio)
Diffuser finish that simulates frosted glass.
Frost filter
Diffusing filter applicable in front of the LED to soften the beam.
Frosted glass
Frosted glass for high-quality LED diffusers.
Frosted lens
Frosted lens that diffuses the LED beam.
Frutto recessed for dimmer
LED dimmer mechanism for mounting in standard wall boxes.
FTP cable
Shielded cable with aluminum foil for LED signals in electrically noisy environments.
Full body induction sensor
Sensor that detects full-body presence for LED activation.
Full cutoff
Fixture that emits no light above the horizontal plane; reduces light pollution.
Full cutoff fixture
LED fixture with no emission above the horizontal plane.
Full HD LED display
LED display with 1920x1080 pixel resolution.
Full moon effect
LED lighting effect that simulates full moonlight; CCT 4100K and low intensity.
Full range dimming
Full-range dimming 0-100% without dead zones.
Full spectrum
Full-spectrum LED covering all visible wavelengths for excellent color rendering (CRI ≥95).
Full spectrum grow LED
Full-spectrum LED optimized for all plant growth phases.
Full spectrum LED strip
LED strip with continuous spectrum similar to sunlight; CRI above 95.
Full wave rectifier
Full-wave rectifier in the LED power supply.
Fully shielded
Fully shielded LED fixture; no emission above the horizontal.
Fume hood lighting
LED lighting for fume hoods; resistant to corrosive vapors.
Function block
Functional block in an LED automation system.
Functional lighting
LED lighting for a specific visual task.
Functional test
Final functional test of the LED fixture before shipment.
Functionality of the LED controller
List of functions available in the LED controller.
Furniture bathroom LED
Bathroom furniture with integrated LED lighting for mirrors and drawers.
Furniture complement
Decorative object with integrated LED strip for ambient lighting.
Furniture garden LED
Outdoor furniture with integrated LED lighting.
Furniture integration
Integration of LED strips and profiles into furniture and furnishings.
Furniture kitchen LED
Kitchen furniture with under-cabinet and interior drawer LED lighting.
Furniture LED
LED lighting integrated into furniture and furnishings.
Furniture luminous from indoor
Indoor furniture accessory with integrated LED strip.
Furniture luminous from outdoor
Outdoor furniture accessory with integrated LED lighting.
Furniture luminous LED
Furniture item or accessory with integrated LED lighting.
Furniture office LED
Desks and office furniture with integrated task LED lighting.
Furniture room LED
Bedroom furniture with integrated LED lighting.
Furniture sensor
Sensor integrated into furniture for automatic LED lighting activation.
Fuse
Protective device that interrupts the circuit in case of overcurrent; present in power supplies and strips.
Fuse box
Fuse box where LED circuit protections are installed.
Fuse holder
Fuse holder in the LED protection circuit.
Fuse of protection LED
Fuse that protects the LED circuit from overcurrent.
Fuse rating
Nominal current rating of the LED circuit protection fuse.
Fuse to reset automatic (PTC)
Resets after cooling; reusable protection.
Fusing current
Tripping current of the fuse in the LED circuit. ↑ Back to top
G
G connectorConnector specific for LED strip with fitting of type G.
G-clamp
G-shaped clamp for temporary mounting of LED fixtures onto structures.
G4/G9/GU5.3/GU10 (bases/caps)
Standardized bases/caps for LED retrofit lamps of various formats.
Gable lighting
LED lighting for the triangular gable end of a building.
Gaffer tape
Professional-grade adhesive tape for temporary LED mounting in stage and event applications.
Gain (guadagno)
Ratio between luminous intensity in a specific direction and average intensity; used for LED optics.
Galleria of art LED
LED lighting for art galleries; CRI >95 and UV protection.
Gallery lighting
LED lighting for art galleries; high CRI and UV protection.
Galvanic cell
Electrochemical cell within the battery of an emergency LED module.
Galvanic corrosion prevention
Insulation between dissimilar metals to prevent electrochemical corrosion.
Galvanic isolation
Electrical insulation between the input and output of an LED driver for safety.
Galvanic isolation transformer
Transformer that provides galvanic isolation between the LED output and the mains grid.
Galvanic separation
Galvanic separation between the mains circuit and the LED output in a driver.
Galvanica (finish)
Electrolytic metal deposition treatment applied to LED profiles for surface finishing.
Galvanized steel bracket
Zinc-coated steel bracket for outdoor mounting of LED profiles.
Gamma accessories LED
Complete set of accessories available to complement an LED system.
Gamma adjustment
Adjustment of gamma curves for natural LED dimming.
Gamma colors LED strip
Range of colors and CCT options available for LED strips in the catalog.
Gamma complete LED
Complete product range including LED strips, profiles, drivers, controllers, and accessories.
Gamma correction
Correction of brightness-to-signal curves to ensure linear perceived dimming.
Gamma curves
Curves that map the input signal to perceived brightness for natural dimming.
Gamma diffusers LED
Complete range of diffuser types available for LED profiles.
Gamma LED connectors
Full range of LED connector types available in the catalog.
Gamma LED controller
Complete series of LED controller models available in the catalog.
Gamma LED power supplies
Full range of LED power supply models available in the catalog.
Gamma LED profiles
Wide selection of LED profile models available in the catalog.
Gamma LED strip
Complete series of LED strip models available in the catalog.
Gamma of LED products
Complete portfolio of LED products offered by a manufacturer.
Gamma of temperature color
CCT range available for an LED strip: typically 2200K–6500K.
Gamut (chromatic)
Area of the CIE diagram covered by an LED system; RGB systems offer a wide gamut.
Gamut mapping
Conversion of a target color into a color reproducible by an RGB LED system.
GaN (Nitruro of Gallio)
Semiconductor material used to manufacture high-efficiency blue and white LED chips.
Gancio of suspension LED
Ceiling-mounted hook for suspending LED profiles using cables.
Ganged dimmer
Multi-channel dimmer housed in a single frame for LED control.
Gantt chart (project LED)
Timeline diagram used for planning LED installation projects.
Gap energy
Energy range between the valence and conduction bands in an LED semiconductor.
Gap filler
Thermally conductive material that fills gaps and irregularities between the LED strip and profile.
Gap filling
Filling of the space between an LED profile and the mounting surface for a clean finish.
Garage application
LED lighting for garages and parking structures; tri-proof fixtures and sensors.
Garage ceiling LED
LED lighting for garage and underground parking ceilings.
Garage door sensor LED
Garage door opening sensor that triggers LED lighting.
Garage interrato LED
LED lighting for underground garages; includes sensors and emergency lighting.
Garden application
LED lighting for gardens; minimum IP65 and landscape integration.
Garden bollard LED
LED luminous post for garden pathways; minimum IP65 rating.
Garden bridge LED
LED lighting for garden bridges and walkways.
Garden contemporaneo LED
LED lighting for contemporary gardens with clean, essential lines.
Garden LED controller
Outdoor-rated LED controller for managing garden lighting.
Garden of inverno LED
LED lighting for winter gardens and conservatories.
Garden path LED
LED lighting for garden paths and driveways.
Garden pensile LED
LED lighting for rooftop gardens and green terraces on buildings.
Garden roccioso LED
LED lighting for rock gardens using in-ground fixtures.
Garden spike light
LED spotlight with a ground spike for installation in garden soil.
Garden spotlight
Adjustable garden LED spotlight with a mounting spike.
Garden to the italiana LED
LED lighting for formal Italian-style gardens with geometric layouts and pathways.
Garden wall light LED
Outdoor LED wall sconce for illuminating walls and fences.
Garden zen LED
LED lighting for Zen gardens; provides a warm, discreet atmosphere.
Gas discharge lamp
Gas-discharge lamp largely replaced by LEDs for better efficiency and lifespan.
Gas station LED
LED lighting for fuel stations; high efficiency and uniform illumination.
Gaseous environment
Environment containing hazardous gases; requires ATEX-certified LED fixtures.
Gasket (gasket)
Silicone or EPDM seal for ensuring the IP rating of profiles and LED fixtures.
Gasket compression
Compression of the gasket to maintain the IP seal in LED profiles.
Gasket material
Material used for gaskets to ensure the IP seal of profiles and LED fixtures.
Gasket replacement
Replacement of sealing gaskets in LED profiles to maintain IP protection.
Gate controller
Circuit that drives the gate of a MOSFET transistor in an LED driver.
Gate driver
Circuit that controls the switching transistor in an LED driver.
Gateway
Interface device connecting different protocols (e.g., Wi-Fi ↔ Zigbee, KNX ↔ DALI) in smart LED systems.
Gateway configuration
Setup of a gateway to enable communication between different LED control protocols.
Gateway firmware
Internal firmware software of an LED communication gateway.
Gathering light
LED lighting designed for social and gathering areas.
Gauge (calibro)
Measurement of material thickness or LED cable cross-section.
Gaussian distribution
Gaussian distribution of luminous intensity typical of certain LED optics.
Gazebo LED
LED lighting for garden gazebos and pergolas.
Gear tray
Technical compartment in an LED fixture that houses the driver and wiring.
Gel (filter colored)
Colored filter sheet placed in front of an LED source to modify its color.
Gel filter frame
Frame designed to hold colored gel filters for stage LED fixtures.
Gelatina colored
Colored material sheet used to filter LED light in stage and theatrical applications.
General illumination LED
LED designed for general ambient lighting; not primarily decorative.
General lighting
Ambient LED lighting that provides the baseline illumination level in a space.
General purpose driver
Standard LED driver compatible with various types of strips and modules.
General purpose LED
LED intended for general applications; not specialized for a specific use.
Generator backup
Backup generator to power the LED system during prolonged blackouts.
Generatore of color
Device or software that generates custom colors for RGB LED strips.
Generatore of effetti LED
Controller that generates dynamic patterns and effects on LED strips.
Generatore of signal DMX
Device that generates the DMX512 control signal for LED systems.
Gentle dimming
Soft, gradual dimming for enhanced visual comfort with LED lighting.
Geofencing
Automatic activation of LED lighting based on the GPS location of a user's smartphone.
Geofencing LED
Automatic activation of LED lighting triggered by GPS location.
Geometric fixture
LED fixture featuring a decorative geometric shape.
Geometric optic
LED optics based on geometric refraction and reflection principles.
Geometric optics
Geometric optics applied to the design of LED lenses and reflectors.
Geometric profile
LED profile with a non-standard geometric cross-section for aesthetic effects.
Geothermal cooling
Geothermal cooling system for high-power underground LED installations.
Geothermal LED
LED system powered by geothermal energy for maximum sustainability.
Gesso for drywall LED
Joint compound/plaster used to finish the junction between an LED profile and drywall.
Ghost current
Stray leakage current that keeps LEDs faintly glowing when the dimmer is turned off.
Ghost load
Dummy load added to meet the minimum load requirement of an LED dimmer.
Ghost power
Residual power consumed by an LED circuit when it appears to be switched off.
Ghosting
Faint residual LED glow when the dimmer is at zero; a compatibility issue.
GHz (Gigahertz)
Wireless communication frequency (e.g., 2.4 GHz for Wi-Fi, Zigbee, Bluetooth).
Gimbal (joint cardanico)
Adjustable mount for LED spotlights allowing rotation on two axes.
Gimbal downlight
LED downlight with a gimbal mount for beam direction adjustment.
Gimbal ring
Gimbal ring enabling biaxial orientation of LED spotlights.
Gioco of light
Decorative effect created by the interplay of LED strip light and surrounding surfaces.
Gioco of ombre LED
Decorative shadow effect created by the distribution of LED light.
Gioielleria LED
LED lighting for jewelry stores; features very high CRI and precise CCT control.
Giravite flat
Flathead screwdriver for tightening LED power supply terminals.
Giravite to stella
Phillips head screwdriver for standard LED profile mounting screws.
Glare
Visual discomfort caused by excessive or poorly distributed luminance; mitigated in LED profiles using opal diffusers.
Glare control
Set of measures (optical design, positioning, shields) to reduce LED glare.
Glare direct
Glare caused by directly viewing the light source without shields or diffusers.
Glare evaluation
Assessment of glare using UGR calculations or direct measurements.
Glare from riflesso
Glare caused by reflection of LED light off glossy surfaces.
Glare indirect
Glare generated by light reflecting off glossy or highly reflective surfaces.
Glare molesto (discomfort glare)
Visual discomfort that does not necessarily impair vision; typical of poorly shielded LED profiles.
Glare rating
Numerical index indicating the glare level produced by an LED fixture.
Glare shield
Anti-glare screen or shield attached to LED profiles or spotlights.
Glare velante (disability glare)
Reduction in visual performance caused by scattered light in the eye; critical in work environments.
Glass bead blasting
Sandblasting using glass microbeads to achieve a frosted finish on LED profiles.
Glass bead finish
Frosted surface finish applied to LED profiles using glass microbeads.
Glass borosilicato
Heat-resistant borosilicate glass used for LED diffusers in high-temperature environments.
Glass channel profile
LED profile featuring a channel designed for inserting glass diffusers.
Glass cover
Glass cover for premium LED profiles and walkable applications.
Glass diffuser
Glass diffuser for premium LED profiles; offers higher transmittance and longevity.
Glass diffuser panel
Glass diffuser panel for high-end LED installations.
Glass enclosure
Glass housing for premium LED fixtures or harsh environments.
Glass fiber cable
Fiber optic cable for transmitting LED control signals over long distances.
Glass fiber reinforced PCB
Glass fiber-reinforced (FR4) PCB used for rigid LED bars.
Glass float
High-quality float glass used for premium LED diffusers.
Glass for profile walkable
Tempered or laminated glass used as a cover for floor-mounted LED profiles.
Glass frosted
Frosted glass material for premium diffuser applications; superior to polycarbonate.
Glass laminate
Laminated glass with integrated LED strips for architectural applications.
Glass lens
Glass lens for high-quality LED fixtures; more durable than plastic alternatives.
Glass panel LED
Glass panel backlit with LED strips.
Glass shelf LED
Glass shelf edge-lit with an LED strip.
Glass soda-lime
Standard soda-lime glass used for basic LED diffusers.
Glass stratificato of safety
Safety laminated glass with PVB interlayer for LED diffusers in public areas.
Glass temperato
Thermally treated safety glass; used in walkable profiles.
Glass transition temperature
Temperature at which a polymer (PMMA, PC) changes state; a key limit for LED diffusers.
Glass wall LED
Glass wall backlit with LED strips for decorative effects.
Glazed surface
Glazed or enamelled surface that reflects LED light.
Glazing (vetrata illuminata)
Integration of LED strips into glass windows and partitions.
Glazing bar LED
Window mullion or glazing bar with an integrated LED strip.
Glazing bead
Glazing bead used to secure a glass diffuser within an LED profile.
Global dimming
Simultaneous dimming of all LED fixtures within a system.
Globe LED
Globe-shaped LED lamp; not related to strips but common in decorative installations.
Globe LED lamp
Decorative spherical LED lamp; not related to LED strips.
Globo LED
Spherical LED fixture for decorative lighting.
Gloss level
Glossiness level of an LED profile's surface finish.
Glow (bagliore)
Soft, diffused light emitted by an LED at low intensity.
GLOW protocol
Proprietary wireless control protocol for smart LED systems.
Glow wire compliance
Compliance with the glow wire test for materials used in LED fixtures.
Glow wire test
Fire resistance test using a heated wire for profile and LED driver materials.
Glow-in the-dark
Phosphorescent material that glows in the dark after exposure to LED light.
Glow-in the-dark strip
Strip containing phosphorescent pigments that emit residual light after power-off.
Glue channel
Channel in an LED profile designed for applying sealing adhesive.
Glue dot
Small adhesive point used for temporary mounting of LED components.
Glue gun
Hot glue gun used for quick temporary mounting of LED components.
Glue joint
Adhesive joint connecting two sections of an LED profile.
Glue stick
Thermoplastic adhesive stick for hot glue guns; used for temporary LED fixing.
Glue to warm (pistola)
Hot melt adhesive gun for quick mounting of LED components.
Glycol cooling
Glycol-based cooling system for very high-power LED installations.
GN (Group Norme)
Regulatory committee that defines standards for LED lighting.
Go/no-go test
Pass/fail quality control test for LED strips during production.
Gocciolamento (anti-)
Feature of an LED profile that prevents condensation buildup and dripping.
Gold coating
Gold plating on LED contacts for maximum conductivity and corrosion resistance.
Gold contact
Gold-plated contact on LED connectors for optimal conductivity and reliability.
Gold plated contact
Gold-plated contact ensuring minimum resistance and maximum reliability in LED connections.
Gold reflector
Gold-coated reflector that enhances warm, inviting LED lighting in hospitality settings.
Gold wire bonding
Connection of the LED die to terminals using ultra-thin gold wire.
Golf course LED
LED lighting for golf courses and driving ranges.
Gondola LED
LED lighting for retail display gondolas in supermarkets.
Goniofotometro to mirror rotante
Laboratory instrument with a rotating mirror used to measure LED light distribution.
Goniometer measurement
Goniometric measurement of an LED fixture's light distribution.
Goniometric data
Light distribution data measured with a goniophotometer for an LED fixture.
Goniophotometer
Laboratory instrument that measures the complete spatial light distribution of a fixture.
Good color rendering
CRI ≥ 80; sufficient for general lighting applications.
Good practice guide
Guide to best practices for installing LED systems.
Google Assistant compatible
LED controller compatible with Google Assistant voice commands.
Google Home / Google Assistant
Google smart home platform for voice-controlled LED lighting.
Gooseneck LED
LED lamp with an adjustable flexible neck for task lighting.
Gothic arch LED
LED profile shaped like a Gothic arch for architectural installations.
Gouge (milling to V)
V-groove milled into wood to insert corner LED profiles.
Government specification
Government technical specification for LED lighting in public buildings.
GPS timing
GPS-based time synchronization for large-scale LED installations.
Graceful degradation
Gradual reduction in LED performance rather than sudden failure.
Gradazione (grazing)
Grazing lighting technique applied to a surface to highlight its texture.
Grade (quality)
Quality tier of an LED component: commercial, professional, or premium.
Graded index lens
Lens with a variable refractive index for optimized LED beam shaping.
Gradi Kelvin LED
Color temperature of LED light expressed in Kelvin.
Gradi of protection IP LED
Classification system for the environmental protection rating of LED fixtures.
Gradient effect LED
Gradual color or intensity fading effect on an LED strip.
Gradient lighting
Lighting featuring a gradual variation of color or intensity along a path.
Gradient temperature
Temperature gradient along an LED profile; should be minimized.
Grading (selezionamento)
Sorting of LED components into quality grades.
Grading system
Qualitative classification system for LED products.
Grafene (conductor thermal)
Material with excellent thermal conductivity; currently being tested for LED PCBs.
Grafene (heat sink)
Graphene sheet used for advanced thermal dissipation in LED strips.
Grafene (substrato in)
Carbon-based material with excellent thermal conductivity; under testing for high-power LED PCBs.
Grain (grana)
Fine visible texture on a diffuser surface; influences aesthetics.
Grain size
Size of phosphor particles in an LED; affects uniformity and efficiency.
Grain structure
Granular structure of diffuser material that influences light diffusion.
Grana of the diffuser
Surface texture/grain of an LED diffuser affecting optical quality.
Graphic display LED
LED display for showing text and graphics.
Graphic equalizer (LED)
LED bar visualizer that displays audio frequencies.
Graphic overlay
Printed graphic panel applied over a push-button LED controller.
Graphite pad
Ultra-thin graphite thermal pad placed beneath an LED strip.
Graphite thermal pad
Thermally conductive graphite pad for high-performance LED heat dissipation.
Grass area LED
LED lighting for grassy areas and lawns in parks and gardens.
Grasso thermal
Thermally conductive paste used for strip-to-profile thermal contact.
Grate ceiling LED
LED lighting for open-grid suspended ceilings.
Grattacielo LED
LED lighting for skyscrapers: facade, interior, and emergency applications.
Gravel board LED
LED lighting for garden edging and curbs.
Gravitational load
Weight/gravity load of a suspended LED profile; used for cable sizing.
Gravity lock
Diffuser locking system in an LED profile that utilizes gravity.
Gray body
Object with constant emissivity; an approximation used in LED thermal calculations.
Gray body radiation
Radiation from a gray body; used as a reference for LED colorimetric calibration.
Gray finish
Gray finish on LED profiles for industrial and modern environments.
Grazer (fixture)
LED fixture with a grazing beam designed to enhance surface textures.
Grazing effect
Lighting effect where light grazes a surface to emphasize its texture.
Grazing fixture
LED fixture specifically designed for grazing wall lighting.
Grazing light
LED light that skims a surface at a low angle to highlight its three-dimensionality and materiality.
Grease-proof LED
Grease-resistant LED fixture for food processing and industrial kitchens.
Green architecture
Sustainable architecture where LED lighting contributes to overall energy efficiency.
Green Building
Sustainable building practices where LED lighting enhances energy efficiency.
Green building certification
LEED or BREEAM certification where LED lighting contributes to scoring.
Green certification
Environmental certification for LED products (e.g., LEED, BREEAM, WELL).
Green LED
LED that emits green light (520–535 nm); a key component of RGB systems.
Green LED (520-535 nm)
Green LED with a peak wavelength between 520 and 535 nm.
Green procurement
Sustainable procurement of LED products with low environmental impact.
Greenfield installation
LED installation in a newly constructed building.
Greenhouse LED
Specialized LED lighting for greenhouses with spectra optimized for plant growth.
Greenway LED
LED lighting for greenways and bicycle paths.
Grey finish
Anthracite gray finish on LED profiles; offers a modern, discreet aesthetic.
Grid calculation
Illumination calculation performed on a point grid to verify LED uniformity.
Grid ceiling
Modular suspended ceiling grid designed to integrate standard LED profiles.
Grid ceiling integration
Integration of LED profiles into a suspended ceiling grid structure.
Grid mount bracket
Bracket for mounting LED fixtures to a suspended ceiling grid.
Grid of calculation
Matrix of points on a target surface for calculating LED illuminance.
Grid of distribution LED
Layout diagram showing the placement of LED fixtures in a space.
Grid of valutazione LED
Evaluation matrix with criteria for assessing LED product proposals.
Grid optics
Honeycomb or louvred structure placed in front of an LED source to control glare.
Grid pattern
Grid layout diagram for the regular placement of ceiling-mounted LED fixtures.
Grid spacing
Distance between calculation points in an LED lighting grid.
Grid system
Grid-based system for modular positioning of LED fixtures in suspended ceilings.
Grill (grid protettiva)
Metal protective grid placed in front of an LED source in industrial environments.
Grille lamp
LED fixture featuring an anti-glare grille for office lighting.
Grip (presa)
Holding force of a clip or mounting system to keep a profile securely in place.
Grip angle
Clamping angle of a mounting clip on an LED profile for secure fixing.
Grip clip
Reinforced holding clip for LED profiles in high-vibration environments.
Grip ring
Internal retaining ring in an LED profile that secures the diffuser.
Grit blasting
Sandblasting with abrasive grit to create a rough finish on LED profiles.
Grommet (cable gland)
Rubber ring for protected cable passage through holes in a profile.
Groove (groove)
Channel/groove in an LED profile for inserting the strip, diffuser, or gasket.
Groove cutting tool
Router or cutting tool used to mill grooves in wood or drywall for LED profiles.
Groove depth
Depth of the channel in an LED profile designed to house the LED strip.
Groove for LED profile
Milled recess in a surface for installing a recessed LED profile.
Groove width
Width of the channel in an LED profile.
Grossista LED
Wholesale distributor of LED products for installers and retailers.
Ground (massa)
Electrical reference connection at zero potential; essential for system safety.
Ground bar
Grounding busbar located in the LED system's electrical panel.
Ground cable
Grounding cable for LED system safety.
Ground clamp
Grounding clamp used to connect an LED fixture to earth.
Ground conductor
Earth conductor (yellow-green) in an LED electrical system.
Ground electrode
Grounding electrode for the LED system's safety earth connection.
Ground fault interrupter
Residual current device (RCD/GFCI) that protects LED circuits from earth leakage.
Ground fault protection
Earth fault protection for LED circuits.
Ground loop
Ground loop that can cause interference in LED systems; should be eliminated.
Ground mount
In-ground mounting of LED fixtures for landscape lighting.
Ground plane
Ground plane on an LED strip PCB for electrical stability.
Ground rod
Grounding rod for outdoor LED installations.
Ground screw
Earth screw for connecting the protective conductor.
Ground terminal
Earth terminal on an LED power supply for PE (protective earth) connection.
Ground wire
Yellow-green earth wire for LED system protection.
Grounding bar
Earth busbar in an electrical panel for grounding LED circuits.
Grounding conductor
Protective earth conductor connected to ground for LED system safety.
Group address DALI
DALI group address used for simultaneous control of multiple LED drivers.
Group addressing
Assignment of addresses to groups of LED fixtures for simultaneous control.
Group control
Simultaneous control of multiple LED fixtures grouped in the same zone.
Group dimming
Simultaneous dimming of all LED fixtures within a designated group.
Group LED smart
Grouping of smart LED fixtures for simultaneous control.
Group of continuity (UPS)
Uninterruptible power supply (UPS) that ensures continuous LED power during electrical blackouts.
Group scene
Lighting scene assigned to a specific group of LED fixtures.
Group switching
Simultaneous on/off switching of a group of LED fixtures.
Grow box
Indoor cultivation chamber equipped with dedicated LED lighting.
Grow light application
LEDs specifically designed for indoor plant cultivation.
Grow light bar
Rigid LED light bar with a spectrum optimized for indoor plant cultivation.
Grow light controller
Specialized controller for managing light/dark cycles in LED grow lighting.
Grow light panel
LED panel featuring a spectrum optimized for plant growth.
Grow light spectrum
LED spectrum optimized for photosynthesis, with peaks in blue (450 nm) and red (660 nm).
Grow light timer
Specialized timer for programming light/dark cycles in LED horticulture.
Grow room
Indoor cultivation room equipped with specialized LED lighting.
Grow spectrum
LED spectrum optimized for photosynthesis, featuring peaks in blue (450 nm) and red (660 nm).
Grow tent
Indoor cultivation tent equipped with LED lighting for plants.
GU10 (fitting)
Twist-and-lock socket for retrofit LED spotlights; not related to LED strips.
Guanti isolanti
Insulating gloves for safe electrical work on LED systems.
Guard glass
Protective glass shield placed in front of the LED source in harsh environments.
Guard rail LED
LED lighting integrated into roadway guardrails for enhanced safety.
Guest room LED
LED lighting for hotel guest rooms; features customizable lighting scenes.
Guide light lateral
Edge-lit PMMA panel that distributes light evenly across its surface.
Guide of light (light guide)
Transparent plastic optical component that transports and distributes light from an LED source.
Guide rail (profile)
Track within an LED profile designed for sliding in and securing the diffuser.
Guide to the calculation LED
Manual for performing lighting calculations using LED sources.
Guide to the choice LED strip
Document to help select the appropriate LED strip for a specific application.
Guide to the choice of the driver
Document to help select the appropriate LED driver for a project.
Guide to the choice of the profile
Document to help select the appropriate LED profile for an application.
Guide to the compatibility LED
Document for verifying compatibility between LED strips, profiles, and drivers.
Guide to the cutting LED strip
Instructions for correctly cutting an LED strip at designated cut points.
Guide to the design LED
Professional manual for designing LED lighting installations.
Guide to the installation LED
Step-by-step manual for installing an LED lighting system.
Guide to the maintenance LED
Document outlining maintenance procedures for an LED system.
Guide to the mounting LED profile
Step-by-step instructions for installing an LED profile.
Guide to the purchase LED
Document to guide the selection of LED products for a specific project.
Guide to the replacement LED
Procedure for replacing an LED strip within a profile.
Guide to the sizing LED
Document for correctly sizing LED strips, drivers, and cables.
Gutter mount
Mounting of an LED strip inside a gutter or drainage channel for perimeter lighting.
Guy wire
Anchoring tension cable/wire for outdoor LED lighting poles.
Gym lighting LED
LED lighting for gyms; features high uniformity and flicker-free operation.
↑ Back to top
H
H-bar profileLED profile with H-shaped cross-section for double strip or bidirectional emission.
H-bridge
Bridge circuit for polarity inversion; used in bidirectional LED drivers.
H-profile
LED profile with H-shaped cross-section for double luminous emission.
Habitable room lighting
LED lighting for habitable environments compliant with standards.
Habitat intelligent LED
Domestic environment with LED lighting integrated into a smart home system.
Habitat LED
LED lighting designed to improve the quality of the living environment.
Habitat luminous LED
Residential environment with LED lighting optimized for wellness.
Hacksaw
Hacksaw for manual cutting of aluminum LED profiles.
Haitz's Law
Empirical observation according to which the luminous flux per LED doubles every 36 months, analogous to Moore's Law.
Half mirror LED
Semi-transparent mirror with LED strip for infinite effect.
Half round profile
LED profile with semicircular cross-section for a rounded effect.
Half-life
Time after which the LED has lost 50% of its initial flux (L50).
Half-power angle
Angle at which the LED intensity drops to 50% of the peak; synonymous with beam angle.
Halide perovskite
Emerging material for LEDs with pure and adjustable emission.
Halide-free cable
Halogen-free cable for fire safety in LED installations.
Hall effect sensor
Magnetic sensor used for counting or positioning in automated LED systems.
Hall hotel LED
LED lighting for hotel lobbies; welcome scenarios.
Hall sensor switch
Hall effect switch for magnetic activation of LEDs.
Hallway lighting
LED lighting for corridors and passages.
Hallway sensor
Corridor sensor for sequential activation of LED lighting.
Halo (profile)
Circular suspended LED profile that creates a luminous ring.
Halo effect
Soft luminous halo around the LED source; a decorative effect sought in architecture.
Halo luminous profile
Halo of light around the LED profile due to reflection on the surface.
Halogen dimmer compatibility
Compatibility of halogen dimmers with LED drivers.
Halogen replacement
Replacement of halogen lamps with equivalent LED sources.
Halogen to LED conversion
Conversion of halogen installations to LED; retrofit.
Halogen-free (HF)
Halogen-free material; for LED cables and enclosures in public buildings.
Halogen-free cable
Halogen-free cable for fire safety in LED installations.
Hammer drill
Percussion drill for drilling masonry for LED mounting.
Hammer finish
Hammered finish on decorative LED profiles; artisanal effect.
Hammerhead bracket
T-shaped bracket for fixing to LED guides and tracks.
Hand gesture control
Control of LED lighting via hand gestures detected by sensors.
Hand sensor
Sensor that detects hand movement to turn on under-cabinet LEDs.
Hand soldering
Manual soldering with a soldering iron on LED strip pads.
Hand tool
Manual tool for installing profiles and LED strips.
Hand wave sensor
Sensor that activates LEDs with a hand gesture.
Hand wave switch
Switch that activates LEDs with a hand gesture.
Handle (profile)
Handle integrated into the LED profile to facilitate installation and maintenance.
Handle mount LED
LED lighting integrated into furniture and door handles.
Handover document
Documentation for the delivery of the LED system to the end customer.
Handrail lighting
LED lighting integrated into stair and balcony handrails.
Hangar LED
LED lighting for aircraft hangars; high power.
Hangar lighting LED
LED lighting for aircraft hangars; high power and uniformity.
Hanger bolt
Double-threaded bolt for suspending LED profiles from wood.
Hanger wire
Suspension wire for LED profiles hanging from the ceiling.
Hanging bracket
Suspension bracket for LED profiles from the ceiling.
Hanging height
Suspension height of a pendant LED profile from the ceiling.
Hanging wire
Steel wire for suspending LED profiles.
Hard ceiling
Rigid ceiling in which LED profiles are recessed with milling.
Hard hat LED
LED lighting integrated into safety helmets for construction sites.
Hard wire
Fixed and permanent electrical connection of the LED fixture.
Hard wired sensor
Wired sensor for controlling LED lighting.
Hardscape lighting
LED lighting of architectural elements in stone, wood, and metal in the landscape.
Hardware compatible
Fasteners and accessories compatible with a specific LED profile.
Hardware kit
Set of fasteners for LED profile installation: screws, anchors, clips.
Hardware of connection LED
Connectors, cables, and terminals for the LED system.
Hardware of fixing
Screws and fasteners for mounting the LED profile.
Hardware of fixing profile
Screws, clips, anchors, and brackets for mounting the LED profile.
Hardware of mounting
Complete set of accessories for LED profile installation.
Hardware of suspension LED
Cables, hooks, and tensioners for suspending LED profiles.
Hardwired
Permanent electrical connection; typical of professional LED installations.
Harmonic distortion
Harmonic distortion introduced by the LED driver on the grid; limited by standard EN 61000-3-2.
Harmonics filter
Filter to reduce harmonics generated by the LED power supply on the grid.
Harness (wiring)
Set of preassembled cables for quick connection of the LED system.
Harsh environment LED
LED fixture for harsh environments: industrial, chemical, marine.
Harvest mode
Light sensor mode that regulates LEDs based on natural light.
Hatch mount
Mounting of LED fixtures on hatches and access panels.
Hazard warning LED
Hazard warning LED light; flashing.
Hazardous area LED
LED fixture for hazardous areas with explosion risk (ATEX).
Hazardous location class
Classification of hazardous areas for selecting LED fixtures.
Haze
Light diffusion in a transparent material; expressed as a percentage.
Haze value
Diffused opacity value of an LED diffuser; expressed as a percentage.
HCL (Human Centric Lighting)
Design approach that adjusts LED color temperature and intensity to the human circadian rhythm.
HCL controller
LED controller dedicated to Human Centric Lighting with circadian adjustment.
HCL design
Design of circadian LED lighting for human wellness.
HCL profile
Circadian light profile programmed into the LED controller throughout the day.
HCL schedule
Time-based programming of CCT and LED intensity for circadian wellness.
HCL sensor
Sensor dedicated to measuring light for circadian LED control.
HCL software
Software for managing and programming Human Centric Lighting LEDs.
HDMI (for LED video)
Video interface used to send content to LED matrices and displays.
Head rail LED
Upper track with integrated LED strip for lighting curtains and drapes.
Head room
Available space above the false ceiling for LED profiles and cabling.
Headboard LED
LED lighting integrated into the bed headboard.
Headboard lighting
LED lighting integrated into the bed headboard.
Header (connector)
Pin connector on PCB for indoor wiring of LED controllers.
Header cable
Cable with pin connector for connection to LED controller PCB.
Headroom clearance
Free space above the false ceiling required for LED installation.
Health care LED
LED lighting for healthcare facilities; high CRI and flicker-free.
Health lighting
LED lighting designed for occupant wellness and health.
Health monitoring (LED)
Monitoring of the LED system's health status for predictive maintenance.
Heat (dissipation of the)
Process of disposing of heat generated by LEDs; essential for performance and lifespan. See "Thermal dissipation".
Heat affected zone
Area of the LED profile thermally influenced by the proximity of the strip.
Heat aging test
Accelerated thermal aging test to predict LED lifespan.
Heat balance
Thermal balance of the LED system: heat generated vs. heat dissipated.
Heat balance equation
Thermal balance equation for sizing the LED profile.
Heat barrier coating
Thermal barrier coating to protect sensitive surfaces from LED heat.
Heat break
Thermal interruption in the LED profile to prevent heat propagation.
Heat capacity
Thermal capacity of the LED profile; amount of absorbable heat.
Heat channel
Heat conduction channel in the LED profile from the strip to the environment.
Heat conduction
Thermal conduction through solid materials of the LED system.
Heat convection
Thermal convection of air around the LED profile for dissipation.
Heat cycle test
Test of repeated thermal cycles to verify LED system robustness.
Heat damage
Damage to LED components caused by excessive temperatures.
Heat deflection temperature
Temperature at which the LED diffuser begins to deform.
Heat dissipation area
Total surface area of the profile available for heat disposal.
Heat dissipation calculation
Calculation of the thermal dissipation capacity of the LED profile.
Heat dissipation capacity
Maximum thermal dissipation capacity of the LED profile.
Heat distribution
Distribution of heat along the LED profile.
Heat emission
Emission of heat from the surface of the LED profile.
Heat exchanger
Heat exchanger in very high-power LED systems with liquid cooling.
Heat flow
Heat flow from the LED chip through the PCB and profile to the environment.
Heat flux
Heat flow per unit area; critical in LED thermal design.
Heat generation
Amount of heat produced by the LED; approximately 60-80% of absorbed power.
Heat generation calculation
Calculation of heat generated by the LED strip in the profile.
Heat load calculation
Calculation of thermal load generated by the LED system in the environment.
Heat management
See Thermal management. Overall management of heat in LED systems.
Heat map analysis
Analysis of the thermal distribution of the LED system via thermal camera.
Heat output
Amount of heat emitted by the LED system into the environment.
Heat path optimization
Optimization of the thermal path from the LED chip to the environment.
Heat pipe
Heat transfer tube for advanced thermal dissipation in high-power LED systems.
Heat radiation
Thermal radiation from the surface of the LED profile; contributes to dissipation.
Heat recovery
Recovery of heat generated by LEDs for heating environments.
Heat resistance
Heat resistance of profile and LED diffuser materials.
Heat resistant cable
Cable with insulation resistant to high temperatures; for areas near high-power LEDs.
Heat rise
Temperature increase of the LED system relative to the environment.
Heat sensitive surface
Surface sensitive to heat on which the LED profile requires insulation.
Heat shield
Thermal shield to protect sensitive components from LED heat.
Heat shrink boot
Shaped heat-shrink protection for Y and T LED connectors.
Heat shrink tubing
Heat-shrink tube for sealing LED strip connections.
Heat sink
See "Heat sink". Metallic element with fins for disposing of LED heat.
Heat sink area
Surface area of the heat sink or LED profile available for thermal exchange.
Heat sink clip
Clip for fixing additional heatsinks to LED profiles.
Heat sink color
Color of the LED heat sink surface; black has higher emissivity.
Heat sink fan
Fan mounted on the heat sink for forced cooling of power LEDs.
Heat sink grease
Thermally conductive grease between LED chip and heat sink; improves contact.
Heat sink material
Material of the LED heat sink: aluminum, copper, graphite.
Heat sink paste
Thermally conductive paste for the interface between LED PCB and profile heat sink.
Heat sink profile
LED profile designed primarily for thermal dissipation.
Heat sink selection
Choice of heat sink based on LED power and maximum temperature.
Heat sink size
Dimensions of the heat sink necessary for LED thermal management.
Heat sink surface treatment
Surface treatment of the LED heat sink to improve emissivity.
Heat sink temperature
Temperature measured on the surface of the LED heat sink during operation.
Heat sink thermal resistance
Thermal resistance of the heat sink; in degrees Celsius per Watt.
Heat soak test
Prolonged heating test to stabilize LED performance.
Heat source
Heat source in the LED system; the chip is the main one.
Heat spreader
Metallic layer in the PCB that distributes heat uniformly.
Heat spreading layer
Layer of thermally conductive material that distributes heat in the LED PCB.
Heat stress relief
Techniques to reduce thermal stress on LED components.
Heat trace
Thermal tracing along the LED profile to verify hot spots.
Heat transfer coefficient
Heat transfer coefficient from the LED profile to the air.
Heat treatment
Thermal treatment of aluminum to optimize the mechanical properties of the LED profile.
Heat up time
Time required for the LED system to reach operating temperature.
Heat zone
Zone of the LED profile where the temperature is highest.
Heated lens
Heated lens to prevent ice formation on outdoor LEDs.
Heater (for LED)
Heater for LED fixtures in extremely low-temperature environments.
Heater integration
Integration of a heating element into the LED profile for cold environments.
Heating effect
Local heating effect caused by LED heat.
Heating element integration
Integration of heating elements with LED profiles in cold climates.
Heatsink compound
Thermal compound applied between LED and heat sink; see Thermal paste.
Heatsink design
Design of the heat sink or LED profile for optimal thermal management.
Heatsink efficiency
Efficiency of the heat sink in transferring LED heat to the environment.
Heatsink extrusion
Extruded aluminum heat sink profile for high-power LEDs.
Heatsink fin spacing
Distance between heat sink fins; optimized for natural convection.
Heavy duty bracket
Reinforced bracket for large or heavy LED profiles.
Heavy duty cable
Reinforced cable for powering high-power LED installations.
Heavy duty clip
Reinforced clip for fixing heavy LED profiles.
Heavy duty connector
Reinforced industrial connector for high-power LED systems.
Heavy duty profile
Reinforced LED profile for industrial and walkable applications.
Height adjustable bracket
Height-adjustable bracket for LED profiles.
Height adjustable pendant
Suspended LED profile with adjustable height via cable reel.
Height minimum of recess
Minimum space above the false ceiling to accommodate a recessed LED profile.
Height of installation
Vertical distance between the LED source and the surface to be illuminated; influences illuminance level.
Height of the diffuser
Vertical dimension of the LED profile cover; influences optical mixing.
Height of the LED profile
Total vertical dimension of the LED profile cross-section.
Height of the profile
Total vertical dimension of the LED profile; critical for recessing.
Height sensor
Height sensor to automatically adjust LED lighting based on position.
Height sensor LED
Sensor that adjusts LED brightness based on installation height.
Height utile of mixing
Minimum distance between the LED strip and the diffuser to achieve uniform light.
Helical LED
LED strip mounted in a spiral on a tubular structure for a decorative effect.
Helipad LED
LED lighting for helipads; signage and approach lighting.
Hermetic connector
Hermetic connector for LED systems in pressurized environments.
Hermetic enclosure
Hermetic enclosure for LED power supplies in critical environments.
Hermetic package
LED package hermetically sealed against gas and humidity.
Hermetic seal
Hermetic sealing of an LED component against gas and humidity.
Hermeticity
Degree of hermetic sealing of an LED component against gas and humidity.
Hex bolt
Hexagonal bolt for fixing LED brackets and supports.
Hex color code
Hexadecimal color code used in RGB LED control apps.
Hex socket screw
Allen screw for mounting LED profiles with a hex key.
Hexagonal profile
LED profile with hexagonal cross-section for decorative applications.
HID replacement
Replacement of high-intensity discharge lamps with LED sources.
HID to LED conversion kit
Kit for converting discharge fixtures to LED.
HID to LED retrofit
Conversion of HID discharge fixtures to LED.
Hidden driver
Power supply hidden above surface-mounted fixtures, in false ceilings, furniture, or niches.
Hidden fastener
Hidden fastening of the LED profile for clean aesthetics.
Hidden LED
Completely invisible LED lighting; only the luminous effect is perceptible.
Hidden profile
LED profile completely recessed and invisible in the surface.
High ambient operation
LED operation at elevated ambient temperatures with derating.
High ambient temperature
High ambient temperature that requires derating of the LED power supply.
High bay controller
Specific controller for managing industrial LED high bays.
High bay driver
LED driver for industrial high bays with high power.
High Bay LED
High-power LED fixture for lighting environments with high ceilings (warehouses, workshops).
High bay mounting
Mounting of LED high bays on high industrial ceilings.
High bay sensor
Presence sensor for industrial LED high bays at elevated heights.
High bay spacing
Distance between LED high bays for uniform warehouse lighting.
High bay UFO
Disc-shaped industrial LED high bay for high ceilings.
High brightness LED
Very high brightness LED; exceeding 200 lm/W efficacy.
High CCT (>5000K)
High color temperature for industrial and technical applications.
High CCT LED strip
LED strip with high color temperature (>5000K) for technical applications.
High color saturation LED
LED with particularly saturated and vivid colors for decorative applications.
High CRI
LED with color rendering index ≥90; essential for applications where color fidelity is critical.
High CRI R9>90
LED with excellent saturated red rendering; for food, art, and retail.
High density (strip)
LED strip with a high number of LEDs per meter (≥120 LED/m) for a more uniform light line.
High density COB
COB strip with over 500 LEDs per meter; perfectly continuous light line.
High density strip 240 LED/m
High-density LED strip with 240 chips per meter.
High density strip 352 LED/m
Very high-density LED strip with 352 chips per meter.
High density strip 480 LED/m
Extremely dense LED strip with 480 chips per meter.
High density strip 700 LED/m
Maximum density LED strip with 700 chips per meter.
High efficiency driver
LED power supply with efficiency greater than 93%.
High efficiency strip
LED strip with luminous efficacy greater than 180 lm/W.
High fidelity color
High fidelity color rendering with Rf greater than 90 (TM-30).
High flux LED
LED chip designed to emit a very high luminous flux.
High flux strip
LED strip with luminous flux greater than 3000 lm/m.
High frequency driver
LED driver operating at high switching frequency to reduce EMI.
High humidity environment
High humidity environment requiring adequate IP protection for LEDs.
High impedance
High impedance of the LED control circuit; for DALI and 0-10V signals.
High impedance input
High impedance input of a 0-10V dimmer to avoid loading the signal.
High intensity discharge (HID)
High-intensity discharge lamps replaced by LEDs.
High mast LED
LED fixture for tall poles (over 12 m).
High output COB strip
High-power COB strip for primary lighting.
High output strip
High-emission LED strip; over 2000 lm/m.
High performance adhesive
High-performance adhesive for LED strips in harsh conditions.
High power (strip)
LED strip with power greater than or equal to 19.2 W/m; for primary lighting.
High power connector
Connector rated for high currents in high-power LED installations.
High power density
High power density per unit area; requires effective dissipation.
High power density strip
LED strip with power greater than 24 W/m.
High power strip 24W/m
24W/m LED strip for task and primary lighting.
High power strip 36W/m
36W/m LED strip for high-power lighting.
High power strip 48W/m
48W/m LED strip for special very high-power applications.
High purity aluminum
High-purity aluminum for indoor LED reflectors.
High temperature adhesive
Special double-sided tape for LED strips in hot environments (>60°C).
High temperature LED
LED designed for operation at ambient temperatures above 60°C.
High voltage cable
Cable for the primary side of the LED power supply (230V AC).
High voltage driver
LED driver with output voltage greater than 60V DC.
High voltage LED strip
LED strip operating at mains voltage (230V AC) with integrated rectifier.
High-bay industrial LED
Suspended LED fixture for industrial warehouses; see High Bay.
High-density strip
LED strip with high chip density (≥120 LED/m); for dot-free effect and uniform lighting.
Highlight
Point of maximum brightness in a scene illuminated by LEDs.
Hinge bracket
Hinged bracket to orient an LED profile after installation.
Hinge mount
Hinged support for LED profiles adjustable after installation.
Hinged diffuser
Hinged diffuser that opens for access to the LED strip.
Histogram luminous
Graph of illuminance level distribution in an LED environment.
Historical building lighting
LED lighting for historical buildings; discreet integration and low invasiveness.
HLG (series Mean Well)
Family of Mean Well outdoor power supplies (IP65/IP67) widely used for professional LED installations.
Hold current
Maintenance current of a PTC fuse; below which it resets.
Hold time (dimmer)
Maintenance time of the dimming level after releasing the command.
Holder (support)
Any element that supports or contains an LED component.
Hole cable gland
Opening in the LED profile end cap for cable passage.
Hole drainage
Opening in the LED profile to allow condensation or water drainage.
Hole in the ceiling for LED
Opening in the ceiling for installing a recessed LED profile.
Hole of fixing
Hole in the LED profile for the passage of the mounting screw.
Hole of recess circular
Round hole in the ceiling for LED downlight; standard diameter.
Hole of recess profile
Milled recess in the surface for inserting a recessed LED profile.
Hole of recess rectangular
Rectangular hole in the surface for a recessed LED profile.
Hole of ventilation
Opening in the LED profile for air circulation and dissipation.
Hole pre-drilled
Pre-drilled hole in the LED profile to facilitate mounting.
Hole through-hole profile
Hole in the LED profile for passing screws or cables.
Holiday lighting (RGB)
Decorative color LED lighting for events and holidays.
Hollow profile
LED profile with hollow cross-section for internal cable passage.
Hollow section profile
LED profile with hollow cross-section for lightness and internal cable passage.
Holographic diffuser
Diffuser with holographic pattern for controlled light distribution.
Home automation
Home automation with intelligent management of LED lighting.
Home automation gateway
Smart home gateway for connecting smart LED devices to the network.
Home cinema bias LED
LED strip behind the screen for bias lighting in home cinema.
Home lighting design
Design of LED lighting for residential environments.
Home office LED
LED lighting for domestic workstations; ergonomic.
Home run cable
Main cable connecting the electrical panel to the first LED fixture on the line.
Home theater lighting
LED lighting for home theater rooms; bias lighting and scenarios.
Homologation
Certification process for an LED product in compliance with current regulations in different markets.
Honeycomb louver
Honeycomb grid for extreme anti-glare control.
Honglitronic chip
LED chip from Chinese manufacturer Honglitronic for LED strips.
Hood (cap)
Protective cover applied to unused LED connectors.
Hook mount
Hook fixing for quick suspension of LED fixtures.
Horizon glow
LED glow at the horizon; to be minimized in dark sky compliant fixtures.
Horizontal beam spread
Horizontal width of the LED beam.
Horizontal cove
Horizontal cove in the ceiling or wall for indirect LED strip.
Horizontal illuminance
Illuminance measured on a horizontal plane; base parameter for calculations.
Horizontal profile mount
Horizontal mounting of the LED profile on a surface.
Horn antenna
Horn antenna used in EMC testing of LED power supplies.
Horsepower (lighting load)
Lighting load power in equivalent terms; for sizing.
Horticultural LED
LED optimized for horticulture with specific spectrum for plant growth.
Horticultural spectrum
Optimized LED spectrum with peaks in blue (440-460 nm) and red (620-670 nm).
Hospital application
LEDs for hospitals; high CRI, flicker-free, dimmable, and emergency-ready.
Hospital grade LED
LED lighting with special requirements for hospital environments.
Hospital LED
LED lighting for hospitals; HCL, emergency, and high CRI.
Hospitality application
LEDs for hotels, restaurants, and spas; emphasis on atmosphere and comfort.
Hospitality lighting
LED lighting designed for hotels, restaurants, and hospitality facilities.
Host (controller)
Main device that manages the LED control network.
Hot aisle containment
Heat containment in server rooms; LED lighting reduces thermal load.
Hot cathode
Warm cathode in fluorescent tubes; absent in LED technology.
Hot cathode lamp
Warm cathode lamp (fluorescent); replaced by LEDs.
Hot dip galvanizing
Hot-dip galvanizing for outdoor LED brackets and supports.
Hot melt
Thermoplastic adhesive for sealing LED connections and components.
Hot melt adhesive
Thermoplastic sealant for sealing LED connections and components.
Hot mirror
Mirror that reflects infrared and transmits visible light; for LED thermal filters.
Hot plug
Ability to connect or disconnect an LED device without turning off the system.
Hot spot
Zone of anomalous luminous or thermal concentration; to be avoided to ensure uniformity and reliability.
Hot start
Quick LED restart after switching off; without delay.
Hot swap
Replacement of an LED component while hot without turning off the system.
Hotel corridor lighting
LED lighting for hotel corridors; sensors and nighttime dimming.
Hotel LED design
Design of LED lighting for hospitality facilities.
Hotel room LED design
Design of LED lighting for hotel rooms with scenarios.
Hotspot analysis
Analysis of hot spots on the LED strip via thermal camera.
Hour counter
Integrated operating hours counter in the LED driver.
Hour meter
Operating hours counter; for planning LED maintenance.
Farmhouse LED
LED lighting for farmhouses and rustic buildings.
Passive house LED
LED lighting for passive buildings; maximum energy efficiency.
Household LED
LED lighting for residential domestic use.
Housing
Enclosure or body of an LED fixture that defines shape and protection.
Housing material
Material of the LED fixture enclosure: aluminum, steel, plastic.
Housing of the LED driver
Enclosure of the LED power supply: plastic, metal, resin.
Housing of the strip
Cavity in the LED profile sized to accommodate the strip with double-sided tape.
HSB/HSV (model color)
Color model based on Hue, Saturation, and Brightness; used in LED apps.
HSL color model
Hue-Saturation-Lightness color model used in LED control interfaces.
Hub and spoke
LED network topology with central hub and peripheral devices.
Hub of control LED
Hub that manages and coordinates all LED devices in the system.
Hub Philips Hue
Specific gateway for the Philips Hue Zigbee LED control system.
Hub smart home
Smart home hub that coordinates Zigbee, Bluetooth, or Z-Wave LED devices.
Hub smart LED
Hub that connects and coordinates smart LED devices.
Hue (tinta)
Color attribute that distinguishes red from blue from green; HSB parameter.
Hue Bridge
Philips gateway for the Hue Zigbee LED lighting system.
Hue gradient strip
Philips Hue LED strip with color gradient along its length.
Hue rotation
Rotation of hue in the HSB model for LED color change effects.
Human centric approach
LED design approach centered on human wellness.
Human Centric Lighting controller
Specific LED controller for managing circadian light.
Human Centric Lighting design
LED lighting design centered on human wellness.
Human Centric Lighting strip
Tunable white LED strip for circadian lighting applications.
Human factor LED
Human factors considered in LED lighting design.
Human factors
Human factors in lighting design: comfort, wellness, productivity.
Humidity rating
Maximum environmental humidity tolerated by an LED component without performance degradation.
Humidity sensor
Humidity sensor for automatic protection of LED systems.
Humidity test
Test in a climatic chamber to verify LED resistance to humidity.
HVAC integration
Integration of LED with heating, ventilation, and air conditioning.
HVAC zone
Climatic zone of the building; LED zoning often coincides with HVAC zoning.
Hybrid connector
Connector that carries both power supply and data signal for LEDs.
Hybrid cooling
Combination of passive and active cooling for high-power LEDs.
Hybrid dimming
Combination of analog and digital dimming in the same system.
Hybrid fixture
LED fixture that combines direct and indirect lighting.
Hybrid LED
LED combining different technologies (e.g., COB + SMD) for optimized performance.
Hybrid profile
LED profile combining aluminum and plastic for lightness and dissipation.
Hydraulic damper
Hydraulic damper for controlling the closure of adjustable LED profiles.
Hydraulic mount
Support with hydraulic damping for LED fixtures in environments with vibrations.
Hydrophobic coating
Hydrophobic coating on outdoor LED profiles that repels water.
Hydrostatic test
Hydrostatic pressure test to verify IP sealing of underwater LED fixtures.
Hyperion (software)
Open-source software for controlling addressable LED strips via PC.
Hz (Hertz)
Unit of frequency measurement; in LEDs indicates PWM frequency or flicker frequency.
↑ Back to top
J
J-boltJ-bolt for suspending LED profiles from structures.
J-box (junction box)
Junction box for connections of the LED system.
J-channel
J-profile for edging and finishing of LED installations.
J-hook
J-hook for suspending cables and LED profiles.
J-mount
J-support for side mounting of LED fixtures.
J-shaped bracket
J-shaped bracket for fixing LED profiles.
Jack barrel
Cylindrical DC connector of various diameters for LED power supplies.
Jack chain
Decorative chain for suspending LED fixtures.
Jack DC
Standard cylindrical connector for DC power supply of LED strips and controllers (typically 5.5×2.1 mm).
Jack DC female
Panel-mounted DC socket for power supply connection.
Jack DC male
DC plug on the output cable of the power supply.
Jack panel mount
Panel-mounted DC socket for powering LED systems.
Jack splitter
DC connector splitter for powering two LED strips from a single output.
Jacket (sheath cable)
Outer protective sheath of the LED power supply cable.
Jacket armor
Armor of the LED cable sheath for mechanical protection.
Jacket color
Color of the LED cable sheath for identification: black, white, gray.
Jacket material
Material of the outer sheath of the LED cable; PVC, silicone, LSZH.
Jacket stripper
Tool for removing the outer sheath of the LED cable.
Jacket stripping
Stripping of the LED cable sheath for connection to terminals.
Jacketed cable
Cable with protective outer sheath for LED installations.
Jam nut
Thin lock nut for fixing connectors and cable glands on LED profiles.
Jamb light
LED lighting integrated in the door jamb.
Japanese candle effect
LED effect simulating the soft light of Japanese lanterns.
Japanese candle LED
Decorative LED lamp simulating a Japanese lantern.
Japanese Industrial Standard (JIS)
Japanese industrial standard; relevant for Japanese-made LEDs.
Jaw coupling
Elastic joint for the mechanical connection of adjustable LED fixtures.
Jet black finish
Glossy black finish on LED profiles for designer environments.
Jet wash resistant
LED fixture resistant to high-pressure washing (IP69K).
Jetting (production)
Deposition process of solder paste for LED strip production.
Jetty lighting LED
LED lighting for jetties and piers; resistant to marine corrosion.
Jewellery lighting
LED lighting for jewelry stores; CRI above 95 and CCT 4000K.
Jewelry display LED
LED lighting for jewelry showcases; high CRI and controlled CCT.
Jewelry showcase LED
Jewelry display case with internal LED strip for maximum rendering of precious materials.
Jig (attrezzatura)
Jig or template for precise positioning of LED strips and profiles.
Jig alignment
Alignment jig for precise positioning of the LED profile.
Jig fixture
Fixing jig for processing LED profiles.
Jig of soldering
Auxiliary tool that holds the strip in position during manual connector soldering.
JIS standard
Japanese industrial standard applicable to LED components.
Job costing LED
Calculation of costs for an LED lighting project.
Job scheduling
Scheduling of LED system installation activities.
Job site LED
Temporary LED lighting for construction sites.
Job site lighting
Temporary LED lighting for construction sites.
Job site safety
Safety on site during LED system installation.
Joining bar
Junction bar for connecting LED profiles in line.
Joining bracket
Junction bracket for connecting two LED profiles in line.
Joining clip
Metal clip for joining two sections of LED profile maintaining continuity.
Joining hardware
Set of components for the mechanical junction of LED profiles.
Joining kit
Kit with components for professional joining of two LED profile sections.
Joining plate
Flat plate connecting two LED profiles side by side or in line.
Joint 45-degree corner
Fitting between two LED profiles at 45 degrees.
Joint 90-degree corner
Fitting between two LED profiles at 90 degrees.
Joint adjustable
Fitting with variable angle between two LED profiles.
Joint bracket
Junction bracket for connecting two LED profiles.
Joint compound
Joint compound or sealant for finishing the junction between LED profile and drywall.
Joint cover
Decorative cover hiding the junction between two LED profiles.
Joint dritto profile
Straight-line fitting between two sections of LED profile.
Joint filler
Filling material for joints between LED profiles.
Joint finishing
Finishing of the junction between two LED profiles for a continuous appearance.
Joint flexible
Flexible element between two sections of LED profile for adaptation to curved surfaces.
Joint gap
Space between two adjacent LED profiles to minimize for continuity.
Joint inspection
Verification of the quality of the junction between LED profiles.
Joint mechanical
Mechanical connection between two sections of LED profile.
Joint of connection profile
Element that joins two sections of LED profile maintaining continuity.
Joint of continuity
Element that connects two LED profiles maintaining the continuous light line.
Joint of expansion
Element that allows thermal expansion between two LED profiles.
Joint of junction corner
Internal plate connecting two LED profiles at an angle.
Joint of junction dritto
Internal plate connecting two LED profiles in a straight line.
Joint plate
Internal joining plate for connecting two LED profiles in line.
Joint profile dritto
Fitting that connects two LED profiles in a straight line without interruption.
Joint profile to 90 degrees
Fitting that connects two LED profiles at 90 degrees with luminous continuity.
Joint profile to T
Fitting that connects three LED profiles in a T.
Joint reinforcement
Reinforcement of the junction between LED profiles for mechanical solidity.
Joint seal
Sealing of the junction between two LED strips to maintain IP protection.
Joint sealant
Sealant for joints of LED profiles in IP installations.
Joint strength
Mechanical strength of the junction between two sections of LED profile.
Joint tape
Tape for finishing the junction between LED profile and drywall.
Joint test
Verification test of the seal and continuity of the LED junction.
Joint thermal
Interruption in the LED profile to allow thermal expansion.
Joint to 45 degrees profile
Corner fitting at 45 degrees between two LED profiles.
Joint to 90 degrees profile
Corner fitting at 90 degrees between two LED profiles.
Joint type
Type of junction between LED profiles: straight, corner, T.
Joint universal
Adjustable fitting compatible with different angles between LED profiles.
Jointing compound
Sealing compound for joints between IP LED profiles.
Jointing tape
Adhesive tape for sealing LED strip joints.
Joule (J)
Unit of energy; used to calculate the heat dissipated by the LED.
Joule effect
Joule effect in the conductors of the LED strip; generates heat due to resistance.
Joule heating
Heating due to Joule effect in the conductors of the LED strip; to be minimized.
Joule loss
Energy loss due to Joule effect in the conductors of the LED strip.
Journal (cuscinetto)
Bearing for adjustable supports of LED fixtures.
Journal bearing
Plain bearing in adjustable supports for LED projectors.
Journal publication
Scientific publication on LED technology in specialized journals.
Joystick controller
LED controller with joystick for color and effect selection.
JST (connector)
Compact push-in connector type widely used in indoor wiring of LED systems.
JST connector crimp
Crimping of the JST connector for LED wiring.
JST connector housing
Body of the JST connector for housing LED contacts.
JST connector pin
Contact pin of the JST connector for LED strips.
JST connector series
Family of JST connectors used in the LED industry: SM, XH, PH, SH.
JST PH
JST PH series connector with 2 mm pitch for compact LED controllers.
JST SH
JST SH series connector with 1.0 mm pitch for micro LED connections.
JST SM
JST SM connector with snap-lock for addressable LED strips.
JST XH
JST connector for PCBs; used in LED controllers and drivers.
JST ZH
JST ZH series connector with 1.5 mm pitch for miniaturized LED systems.
Jump wire
Short wire for bridging segments or sections of LED strip.
Jumper
Short cable section connecting two interrupted LED strip segments, maintaining the continuity of the light line.
Jumper bar
Conductive bar connecting adjacent terminals on an LED terminal block.
Jumper block
Connection block for bypassing or connecting sections of the LED circuit.
Jumper cable
Short pre-made cable for bypassing a segment of LED strip.
Jumper cable assembly
Pre-made jumper cable for connecting sections of LED strip.
Jumper configuration
Configuration of jumpers on the LED controller board.
Jumper link
Jumper connection on a terminal block for bypassing or connecting LED terminals.
Jumper pad
Pad on the LED strip for bridging alternative configurations.
Jumper setting
Configuration via jumpers on LED controller boards.
Jumper wire
Short wire for bridging or bypassing faults on the LED strip.
Junction accessory
Component for joining two LED profiles in continuity: plate, bracket, or clip.
Junction box
Junction box for connections of the LED system.
Junction box adapter
Adapter for mounting an LED fixture on an existing junction box.
Junction box bracket
Bracket for mounting LED fixtures on branch boxes.
Junction box cover
Cover of the junction box for LED installations.
Junction box entry
Cable entry point in the junction box of the LED system.
Junction box grounding
Grounding of the junction box of the LED system.
Junction box IP65
Watertight junction box for outdoor LED installations.
Junction box mounting
Mounting of the LED fixture directly on a wall junction box.
Junction fitting
Junction fitting for LED cable conduits.
Junction p-n
Active zone of the LED chip where electron-hole recombination produces photons (light).
Junction p-n (LED)
Active zone of the LED chip where electrons and holes recombine emitting light.
Junction temperature (Tj)
Temperature of the p-n junction of the LED chip; critical parameter influencing brightness, color, and duration.
Junction temperature calculation
Calculation of the junction temperature of the LED based on operating conditions.
Junction temperature derating
Reduction of LED performance when Tj exceeds the optimal value.
Junction temperature limit
Maximum allowed temperature for the LED chip junction.
Junction temperature measurement
Measurement of the Tj temperature of the LED chip via indirect methods.
Junction temperature monitoring
Monitoring of the Tj temperature of the LED chip for protection.
Junction thermal
Contact point between the LED chip and the substrate; junction temperature (Tj) influences performance and useful lifetime.
Junior spot LED
Small LED spotlight for accent lighting in showcases and display cases.
Jury mast light
Emergency LED lighting on temporary structures.
Just noticeable difference (JND)
Minimum perceptible variation of brightness or color to the human eye.
Just-in-time delivery
Just-in-time delivery of LED components for warehouse optimization.
Justification (illuminotecnica)
Technical rationale for design choices in the LED system.
Jute rope light
Jute rope with integrated LED strip for rustic decorative lighting.
Juvenile lighting
LED lighting for children's rooms; safe, colored, and dimmable. ↑ Back to top
K
K factorCorrection factor for thermal-magnetic circuit breakers considering the inrush current of LED power supplies.
K-factor (lighting design)
Maintenance factor in LED lighting calculation.
Kaizen (process)
Continuous improvement applied to the production of LED components.
Kaizen (production LED)
Continuous improvement philosophy applied to the production of LED strips.
Kapton insulation
Polyimide Kapton insulation for flexible circuits of LED strips.
Kapton tape
Heat-resistant polyimide tape for masking during LED strip soldering.
Kelvin (K)
Unit of measurement of color temperature; from 1800K (amber warm) to 15000K+ (ice white).
Kelvin adjustment range
CCT adjustment range in tunable white LED strips.
Kelvin chart
Reference table of LED color temperature and their applications.
Kelvin halo
Perceptible CCT variation between the center and edges of an LED beam.
Kelvin meter
Portable instrument for measuring the CCT of LED light.
Kelvin preference
User's preference of CCT for the LED lighting of the environment.
Kelvin range
Range of color temperature available for an LED strip.
Kelvin scale
Scale of color temperature from 1800K (amber) to 15000K (ice).
Kelvin selection
Selection of the desired CCT via DIP switch or controller.
Kelvin shift
Variation of the color temperature of an LED over the course of its useful lifetime.
Kelvin stability
Stability of the LED's CCT over time and with temperature changes.
Kelvin step
Minimum increment of adjustable CCT in a tunable white LED strip.
Kelvin tolerance
Tolerance on the declared CCT of the LED strip; typically +/- 100K.
Kerf (cutting)
Width of the saw cut for milling the housing of the LED profile.
Kernel (firmware)
Core of the firmware of the LED controller that manages the basic functions.
Key card switch
Key card switch for activation of LED lighting in hotel rooms.
Key inglese
Adjustable wrench for tightening nuts on LED brackets.
Key light
Main light in a scene; the dominant LED source.
Key of programming
Hardware or software key for LED system configuration.
Key switch
Key switch for safe control of LED lighting.
Key to brugola
Hex key for tightening recessed head screws on LED profiles.
Keyhole bracket
Bracket with keyhole for mounting with round-head screws.
Keyhole mount
Mounting system with keyhole for LED profiles.
Keyhole slot
Keyhole slot in the LED profile for concealed screw mounting.
Keypad backlight
Backlighting of keyboards and control panels.
Keypad controller
LED controller with physical keypad for scene selection and dimming.
Keypad dimmer
Dimmer with buttons for direct selection of LED levels and scenes.
Keypad panel
Control panel with keypad for managing LED lighting.
Keystone bracket
Trapezoidal bracket for corner correction in LED mounting.
Keystone connector
Modular keystone connector for LED signal distribution panels.
Keystone correction
Correction of trapezoidal distortion in LED projection on inclined surfaces.
Keystone effect (lighting)
Trapezoidal deformation of the LED beam on inclined surfaces.
Kick plate LED
Baseboard with integrated LED strip for floor-level lighting.
Kick start
Initial pulse for starting the LED power supply.
Kickback voltage
Transient voltage generated by switching inductive loads in the LED circuit.
Kickplate LED
LED lighting integrated into the kickplate of a door or cabinet.
Kill switch
Emergency switch for quick shutdown of the entire LED system.
Kilolux
Thousand lux; unit for high illuminance in special LED applications.
Kilowatt (kW)
Thousand Watts; unit for the total power of large LED installations.
Kilowatt-hour (kWh)
Unit of energy; for calculating the consumption of the LED system over time.
Kinematic design
Kinematic design of adjustable LED supports.
Kinematic mount
Kinematic mount for precise positioning of LED optics.
Kinetic LED
Artistic installation with moving LEDs for dynamic effects.
King post LED
LED lighting integrated in the central pillar of a structure.
Kit complete installation
Set with all clips, end caps, and screws for LED profile installation.
Kit LED strip
Complete set with LED strip, power supply, controller, and accessories ready for installation.
Kit of connection
Set with connectors and cables for connecting LED strips to power supplies and controllers.
Kit of junction
Set with connectors, cables, and sleeves for professional LED strip joints.
Kit of junction corner
Set with connectors and plates for corner joints between LED profiles.
Kit of mounting
Set with clips, screws, end caps, and accessories for LED profile installation.
Kit of suspension adjustable
Set with cables and tensioners for adjustable suspension of the LED profile.
Kit retrofit LED
Complete set for converting a traditional fixture to LED.
Kitchen application
LED lighting for kitchens; under-cabinet, island, and hood lighting with high color rendering.
Kitchen cabinet LED
LED lighting inside kitchen cabinets.
Kitchen ceiling LED
Ceiling-mounted LED lighting for kitchens; high CRI and uniformity.
Kitchen counter LED
LED lighting for the kitchen work surface.
Kitchen counter LED lighting
LED lighting for kitchen work surfaces under wall cabinets.
Kitchen downlight
LED downlight specific for kitchens with IP44 protection.
Kitchen hood LED
LED lighting integrated in the kitchen range hood.
Kitchen island LED
Suspended LED lighting above the kitchen island.
Kitchen island lighting
LED lighting for the kitchen island; suspended linear profiles.
Kitchen LED strip
LED strip specifically for under-cabinet and kitchen work surface lighting.
Kitchen lighting design
Design of LED lighting for kitchens; task + ambient + accent.
Kitchen plinth LED
LED strip in the kitchen plinth for floor-level lighting.
Kitchen strip
LED strip specific for kitchens; high CRI, minimum IP44, CCT 3000-4000K.
Kitchen task lighting
Functional LED lighting for the kitchen work surface.
Kitchen under-cabinet LED
LED light under kitchen wall cabinets for the work surface.
Kite mount
Diamond-shaped mounting for diagonal fixing of LED profiles.
Kitting
Packaging of a complete kit of strip, profile, power supply, and LED accessories.
Kitting service
Packaging service for customized LED kits with all components.
Klüber (grasso thermal)
Quality thermally conductive grease used to improve thermal contact between strip and profile.
Knee wall LED
LED lighting integrated in architectural knee walls.
Knee wall lighting
LED lighting in the knee wall of an attic.
Knife edge beam
LED beam with very sharp edges for precise light cuts.
Knife switch
Knife switch for sectioning industrial LED circuits.
Knob dimmer
Dimmer with rotary knob for LED brightness adjustment.
Knockout
Pre-punched hole in the LED power supply enclosure for cable entry.
Knockout plug
Plug for closing unused knockout holes in the LED power supply.
Knot (nodo, network)
Connection point in a LED control network.
Knowledge base (LED)
Database of technical information and FAQs on LED products.
Knurled finish
Knurled finish on LED profiles for non-slip grip or industrial aesthetics.
KNX
Open standard bus protocol (ISO/IEC 14543) for building automation, including LED management.
KNX actuator
KNX control actuator for LED fixtures.
KNX actuator channel
Channel of the KNX actuator for controlling an LED group.
KNX address table
Table of KNX addresses of LED devices in the system.
KNX binary input
KNX binary input for interfacing buttons and contacts with the LED system.
KNX brightness sensor
KNX brightness sensor for LED daylight harvesting.
KNX bus cable
KNX bus cable (2x2x0.8 mm, green) for connecting LED devices.
KNX bus coupler
KNX bus coupler for interfacing LED actuators.
KNX central function
Central KNX function for simultaneous control of all LEDs.
KNX commissioning tool
ETS software for programming and configuring the KNX-LED system.
KNX constant light control
KNX constant light control that regulates LEDs based on natural light.
KNX controller
LED controller compatible with the KNX protocol for building automation.
KNX coupling unit
Coupling unit for connecting segments of the KNX bus.
KNX DALI gateway 64
KNX-DALI gateway for controlling up to 64 LED drivers.
KNX diagnostic
KNX diagnostics for verifying the status of LED devices.
KNX dimming actuator
KNX actuator for dimming LED circuits.
KNX ETS software
Engineering Tool Software for programming KNX-LED systems.
KNX group object
KNX group object for communication between LED devices.
KNX input module
KNX input module for buttons and sensors in the LED system.
KNX IP gateway
Gateway connecting the KNX bus to the IP network for remote management.
KNX IP router
KNX router on the IP network for remote management of LED lighting.
KNX LED dimmer module
Specific KNX module for dimming LED strips and drivers.
KNX line coupler
KNX line coupler for expanding the LED lighting network.
KNX logic module
KNX logic module for creating automations in LED lighting.
KNX motion detector
KNX motion detector for automatic LED activation.
KNX occupancy sensor
KNX occupancy sensor for presence-based LED control.
KNX physical address
Unique physical address of the KNX-LED device in the network.
KNX power supply 640 mA
KNX bus power supply from 640 mA for lines with many LED devices.
KNX presence detector
KNX presence detector for environments with LED lighting.
KNX programming
Programming of the KNX system for controlling LEDs with ETS software.
KNX push-button interface
KNX interface for traditional buttons controlling LEDs.
KNX scene actuator
KNX actuator for storing and recalling LED scenes.
KNX scene module
KNX module for storing and recalling lighting scenes.
KNX sensor
KNX sensor (presence, light, temperature) for LED automation.
KNX staircase timer
KNX staircase timer for timed LED lighting in stairwells.
KNX switch actuator 4 fold
4-channel KNX switching actuator for LED groups.
KNX switching actuator
KNX actuator for switching on/off LED circuits.
KNX timer
KNX timer for time-based programming of LED lighting.
KNX topology
Topology of the KNX network: line, area, backbone for LED control.
KNX universal dimmer
Universal KNX dimmer compatible with LED drivers, halogens, and fluorescents.
KNX USB interface
KNX-USB interface for programming the system from a PC.
KNX visualization
Software for visualization and graphical control of the KNX LED system.
KNX weather station
KNX weather station for automatic control of outdoor LED lighting.
KNX-DALI gateway
Interface connecting the KNX bus to DALI drivers for integrated control of LED lighting. ↑ Back to top
L
L-bracketL-bracket for corner mounting of LED profiles.
L-bracket mount
Mounting with L-bracket for corner LED profiles.
L-shaped connector
L-connector for 90-degree bends between LED strips.
L-shaped profile
LED profile with L cross-section for installation in interior angles.
L50
LED useful lifetime: hours at which the flux drops to 50% of the initial.
L70 / L80 / L90
LED lifetime standards; indicate the operating hours at which the flux drops to 70%, 80%, or 90% of the initial.
L-bracket for wall
L-shaped bracket for wall-mounting the LED profile.
Lab color space
CIE L*a*b* color space for measuring perceptible color differences between LEDs.
Lab sample
Laboratory sample for verifying LED performance before production.
Lab testing
Laboratory tests on the performance of LED products.
Label (label)
Identification label with technical specifications applied to strips and LED power supplies.
Label energy LED
Label with the energy class of the LED fixture.
Label of the product LED
Label with technical data applied on the LED strip or on the power supply.
Label printer LED
UV LED for curing labels in industrial printers.
Laboratory analysis LED
LED lighting for analysis laboratories; high CRI and uniformity.
Laboratory chimico LED
LED lighting for chemical laboratories; resistant and safe.
Laboratory fotografico LED
LED lighting for photographic laboratories; controlled spectrum.
Laboratory LED lighting
LED lighting for laboratories; high CRI and uniformity.
Labyrinth seal
Labyrinth gasket for IP protection without contact; for LED profiles.
Lace mount
Decorative mounting with weaving fixing for LED fixtures.
Lacquer finish
Lacquer finish on LED profiles for custom colors and gloss.
Lacuna (semiconductor)
Positive charge carrier in the semiconductor LED; complement of the electron.
Ladder cable tray
Ladder-type cable tray for LED cables.
Ladder diagram
Ladder diagram for programming PLCs that control industrial LED installations.
Ladder mount
Mounting of LED profiles on ladder or truss structures.
Lag bolt
Lag bolt for fixing LED brackets on solid wood.
Lambertian emitter
Source emitting with a cosine distribution; the bare LED is almost Lambertian.
Lamella anti-glare
Internal fin in the profile that blocks direct view of the LED strip, reducing glare.
Laminated glass LED
Laminated glass with integrated LED strip for architectural design.
Lamp dceiling-mounted LED
LED ceiling light for general ceiling-mounted lighting.
Lamp dwall-mounted LED
Wall-mounted LED sconce for decorative and functional lighting.
Lamp from lettura LED
Focused and dimmable LED light for reading.
Lamp from tavolo LED
Desk LED lamp for visual task lighting.
Lamp from terra LED
Floor-standing LED lamp for ambient and reading lighting.
Lamp holder
Lamp holder; not related to LED strips but present in hybrid fixtures.
Lamp post LED
LED street light for road and pedestrian lighting.
Lamp shade LED
Lampshade with LED source for atmospheric lighting.
Lamp suspended LED
Suspended LED fixture for table and counter lighting.
Lampholder adapter
Adapter for mounting LED modules in existing lamp holders.
Land (PCB)
Copper pad on the LED strip PCB for soldering components.
Landing light
LED lighting of the stair landing; motion sensor.
Landing lighting LED
LED lighting for landings and stairwell areas.
Landscape bollard
LED bollard for landscape and garden path lighting.
Landscape fixture
LED fixture for landscape and green space lighting.
Landscape lighting
LED lighting for gardens, parks, and green spaces.
Landscaping LED design
Design of LED lighting for the outdoor landscape.
Lane marking LED
Luminous LED signage for lane delineation.
Lantern LED
Decorative LED lantern for outdoor and indoor use; classic or modern style.
Lap joint
Overlap joint between two LED profiles.
Laptop LED backlight
Backlighting for laptop computer screens.
Large area LED
LED lighting for large areas: warehouses, storage, stadiums.
Large format LED
LED display or installation of large dimensions for facades and events.
Large format profile
Large-dimension LED profile for architectural installations.
Large scale installation
Large-scale LED installation with hundreds of fixtures.
Laser
Coherent light source; some hybrid LED-laser technologies are used in high-performance lighting.
Laser alignment
Laser alignment for precise positioning of LED profiles.
Laser cut (profile)
Precision cutting of the aluminum profile via laser.
Laser diode
Laser diode; parallel technology to LEDs for high focal power applications.
Laser engraving
Laser engraving on the LED profile for customization and branding.
Laser level
Laser level for alignment of LED profiles during installation.
Laser measurement
Laser measurement of distances for the LED project.
Last mile (wiring)
Last segment of cable between the electrical panel and the LED light point.
Last mile cabling
Wiring of the last segment between the panel and the LED light point.
Last mile connection
Last connection between the panel and the LED fixture.
Latch (fermo)
Snap-lock mechanism securing the diffuser in the LED profile, preventing accidental disassembly.
Latch mechanism
Locking mechanism of the diffuser in the LED profile.
Latch release
Quick release mechanism of the diffuser from the LED profile.
Latching relay
Bistable relay that maintains state without power; for LEDs.
Late payment penalty
Penalty for late payment of the LED supply.
Latenza
Time delay in the response of an LED system to a command; critical in wireless protocols.
Lateral chromatic aberration
Lateral shift of the image at different wavelengths in an LED lens.
Lateral emission
Lateral light emission from the LED strip; with side-emitting chip.
Lateral light distribution
Lateral light distribution of the LED fixture.
Lattice mount
Mounting on grid or truss for LED fixtures.
Lattice structure
Lattice structure of the LED semiconductor crystal.
Launch angle
Initial emission angle of the photon from the LED die.
Laundry room LED
LED lighting for laundry rooms; resistant to humidity.
Lay-in fixture
LED fixture resting in the suspended ceiling grid.
Layer stack-up (PCB)
Composition of the layers of the multilayer LED strip PCB.
Layered diffuser
Multilayer diffuser for advanced control of light distribution.
Layered lighting
Layered design: ambient + task + accent for complete environments.
Layout drawing
Plan drawing with the arrangement of LED fixtures in the project.
Layout libero
Arrangement of LED fixtures in non-regular shapes.
Layout of the LED system
Plan layout of all LED light points in the project.
Layout optimization
Optimization of the LED layout for uniformity and energy saving.
Layout plan
Plan of the LED lighting layout in the architectural project.
Layout to file
Arrangement of LED fixtures in parallel rows.
Layout to maglia
Arrangement of LED fixtures in a regular grid.
Layout to perimeter
Arrangement of LED fixtures along the perimeter of the environment.
LCD backlight
Backlighting for liquid crystal displays.
LCD display (controller)
Liquid crystal display on the LED controller for parameter visualization.
Lead time
Delivery time from order confirmation to shipment of the LED product.
Lead wire
Wire conductor connected to the LED strip for power supply.
Lead-free solder
Lead-free solder (RoHS); standard for modern LED strips.
Leader cable
Guide cable for installing LED strips in difficult spaces.
Leadership in the sector LED
Dominant market position of the manufacturer in LED technology.
Leading edge (dimming)
See "Dimmer leading edge". Rising phase cutting for brightness adjustment.
Leakage current
Leakage current; limited for safety by LED driver standards.
Leakage flux
Dispersed luminous flux that does not contribute to useful lighting.
Lean manufacturing
Lean manufacturing applied to the production of LED components.
Lean manufacturing LED
Lean production of LED components for efficiency and quality.
Learning mode (sensor)
Learning mode of the sensor for calibrating LED parameters.
Lease (noleggio LED)
Business model with operational leasing of LED installations.
Lease agreement LED
Leasing contract for professional LED installations.
Leasing LED
Operational leasing of LED installations with periodic subscription.
Lecture hall LED
LED lighting for university lecture halls; scenarios for lectures and projection.
LED (Light Emitting Diode)
Light emitting diode; semiconductor component that emits light with current flow.
LED addressable (indirizzabile)
LED strip in which every LED or group of LEDs has an individual digital address for dynamic effects (WS2812, SK6812).
LED amber (ambra)
590-600 nm LED; for warm lighting and signage.
LED array configuration
Configuration of the arrangement of LEDs on the strip or in the module.
LED array module
Module with LED arrangement in a matrix for high power.
LED as investment
LED lighting viewed as an investment with economic return.
LED assembly
Complete assembly of strip, profile, diffuser, and accessories ready for installation.
LED assembly line
Assembly line for LED strip production.
LED backlight unit (Blue)
Backlighting unit for displays and panels.
LED bar decorative
Rigid LED bar for decorative lighting of furniture and shelves.
LED bar for acquario dolce
LED bar with spectrum for freshwater plants and fish.
LED bar for acquario marino
LED bar with specific spectrum for corals and marine organisms.
LED bar for mirror
Rigid LED bar for perimeter lighting of mirrors.
LED bar for scaffale
Rigid LED bar for lighting shelves and racks.
LED bar for shop window
Rigid LED bar for internal lighting of showcases.
LED bar functional
Rigid LED bar for task lighting of counters and work surfaces.
LED bar rigid
LED strip mounted on a rigid aluminum PCB instead of flexible; for fixed linear applications.
LED beam angle
Opening angle of an LED light beam; typically 120 degrees for strips.
LED binning report
Manufacturer's document reporting the binning data of the supplied LED chip batch.
LED blue
450-475 nm LED; basis for white LEDs via phosphors.
LED board
LED board; PCB with mounted chips ready for insertion in fixture.
LED catalog
Catalog of the manufacturer's LED products with specifications and codes.
LED ceiling light
LED ceiling light for general ceiling-mounted lighting.
LED ceiling light for bathroom
IP44 LED ceiling fixture for bathroom lighting.
LED ceiling light for kitchen
LED ceiling fixture for general kitchen lighting.
LED ceiling light for living-room
Dimmable LED ceiling fixture for the living room.
LED certification body
Authorized certification body for LED products.
LED chandelier
Chandelier with LED sources; classic or contemporary design.
LED chip
Semiconductor component that emits light when current flows; the core of the LED source.
LED chip manufacturer
LED chip manufacturer: Samsung, Nichia, Cree, Osram, Bridgelux, Lumileds, Seoul.
LED circuit design
Design of the electrical circuit for LED strips and modules.
LED cluster
Closely spaced group of LEDs for high luminous density.
LED color sorting
Selection and classification of LED chips by color during production.
LED color wheel
Color wheel in the LED app for visual shade selection.
LED compatibility list
List of compatibility between dimmer and LED driver verified by the manufacturer.
LED controller
Electronic device that manages color, intensity, and effects of the LED strip (PWM, DMX, Wi-Fi, Zigbee).
LED controller app
Mobile application for managing smart LED systems.
LED controller pixel
Controller dedicated to driving addressable LED strips pixel by pixel.
LED conversion
Conversion of a traditional system to LED technology.
LED conversion factor
Conversion factor for calculating the LED equivalent of traditional sources.
LED cooling system
Cooling system designed for high-power LEDs.
LED cost analysis
Analysis of LED lighting costs: purchase, installation, operation.
LED cost comparison
Comparison of costs between LED lighting and traditional sources.
LED Cree
US brand of high-efficiency and reliable LED chips for professional applications.
LED current regulator
Regulator that maintains constant current through the LED.
LED data management
Management of technical and performance data of LED products.
LED datasheet
Datasheet with all the specifications of the LED product.
LED deep red
Deep red LED (660 nm); used in LED horticulture.
LED degradation model
Mathematical model for predicting the degradation of LED performance over time.
LED design guide
Guide to the design of LED lighting systems.
LED design guideline
Guidelines for the design of LED installations.
LED desk lamp
LED desk lamp for work surface lighting.
LED die
See Die. Semiconductor crystal emitting light.
LED diffuser sheet
Diffuser sheet applicable on surfaces to uniform LED light.
LED dimming curves
Curves describing the relationship between control signal and perceived brightness.
LED display panel
Display panel composed of LED matrices for video and advertising.
LED disposal regulation
Regulation on the disposal of LED products at end of life (WEEE).
LED driver
Synonym of LED power supply; device that regulates current and voltage for optimal LED operation.
LED driver compatibility list
List of compatibility between LED driver and dimmers of different brands.
LED driver datasheet
Complete datasheet of the LED driver with all parameters.
LED driver efficiency curves
Efficiency curves of the LED driver as a function of load.
LED driver IC
Integrated circuit specific for driving LEDs.
LED driver input specification
Input specifications of the LED driver: voltage, frequency, current.
LED driver noise level
Acoustic noise level of the LED driver; in dB.
LED driver output specification
Output specifications of the LED driver: voltage, current, power.
LED driver protection features
Protection functions of the LED driver: OCP, OVP, SCP, OTP.
LED driver selection guide
Guide to choosing the LED driver based on the application.
LED driver sizing
Sizing of the LED driver based on the load and safety margin.
LED driver thermal management
Thermal management of the LED driver to ensure long duration.
LED ecosystem
Ecosystem of compatible LED products: strips, profiles, drivers, controllers, accessories.
LED education
Training and professional updating on LED technology.
LED efficiency benchmark
Efficiency benchmark for comparing different LED products.
LED efficiency record
Record of LED luminous efficacy achieved in the laboratory; beyond 300 lm/W.
LED emergency standard
Standard for emergency LED lighting: EN 1838.
LED enclosure rating
Classification of the LED product enclosure for environmental protection.
LED energy audit
Specific energy audit for the LED lighting of the building.
LED energy calculator
Online calculator of LED consumption and energy savings.
LED energy monitoring
Continuous monitoring of the consumption of the LED system.
LED energy saving calculator
Tool for calculating the energy savings of switching to LED.
LED environmental impact
Environmental impact of LED lighting throughout its life cycle.
LED exhibition
Trade fair specialized in LED lighting: Light + Building, PLDC, LuxLive.
LED failure mode
Failure mode of the LED: open circuit, short circuit, degradation.
LED far red
Far infrared LED (730 nm); for grow lighting.
LED filament
LED filament replicating the aesthetics of incandescent lamps.
LED filament vintage
LED lamp mimicking the aesthetics of the Edison filament; not a strip.
LED fixture manufacturer
Manufacturer of LED lighting fixtures.
LED flicker meter
Instrument measuring the flicker of LED light according to IEC TR 61547-1.
LED flood lamp
LED projector with wide beam for outdoor area lighting.
LED floor lamp
Floor-standing LED lamp.
LED flux maintenance
Maintenance of LED luminous flux over time; L70, L80, L90.
LED for acquario
LED with specific spectrum for aquariums: plants, corals, fish.
LED for architecture
LED lighting as a design tool for architecture.
LED for automation
LED lighting integrated into building automation systems.
LED for bathroom
LED lighting for bathroom environments with IP protection.
LED for coltivazione
LED for grow light with PAR spectrum optimized for photosynthesis.
LED for comfort
LED lighting as a tool for visual wellness.
LED for corridor
LED lighting for corridors with sensors and uniformity.
LED for design
LED lighting as a design element in the environment.
LED for design of indoor
LED lighting as a key element of interior design projects.
LED for efficiency
LED lighting as a tool for energy savings.
LED for energy efficiency
LED lighting to reduce the building's energy consumption.
LED for every environment
Range of LED products suitable for any type of environment.
LED for every esigenza
Variety of LED solutions to meet any lighting design requirement.
LED for furniture
LED strips integrated into furniture and furnishings.
LED for garden
LED lighting for gardens and outdoor green spaces.
LED for house
Residential LED lighting for all domestic environments.
LED for industry
LED lighting for factories and industrial warehouses.
LED for lighting general
LED for the base lighting level of an environment.
LED for lighting task
LED focused on the visual task: reading, work, kitchen.
LED for living-room
LED lighting for living rooms with layered scenarios.
LED for new construction
LED lighting designed during the building construction phase.
LED for restaurant
LED lighting for restaurants with atmosphere and dimming.
LED for ristrutturazione
LED lighting for building renovation interventions.
LED for room from letto
LED lighting for the bedroom with warm CCT and dimming.
LED for scale
LED lighting for stairs with strip on steps or handrail.
LED for shop
LED lighting for retail points of sale with high CRI.
LED for terrario
LED with spectrum for reptiles and amphibians in terrariums.
LED for the futuro
LED technology constantly evolving towards greater efficiency.
LED for office
LED lighting for offices compliant with EN 12464-1.
LED for wellness
HCL and chromotherapy LED lighting for wellness.
LED garden light
LED fixture for lighting gardens and green spaces.
LED globe lamp
Globe-shaped LED lamp for decorative lighting.
LED green
520-535 nm LED; component of the RGB system.
LED grow full spectrum
LED for cultivation with a complete spectrum optimized for all phases.
LED grow light blue
LED for the vegetative phase of plants; 440-460 nm.
LED grow light red
LED for the flowering phase of plants; 620-670 nm.
LED grow panel
LED panel for indoor plant cultivation.
LED HE (High Efficiency)
Chip optimized for maximum luminous efficacy (lm/W).
LED heat generation rate
Speed of heat generation in the LED chip.
LED heat map
Thermal map of the temperature distribution on an LED strip.
LED heatsink design
Design of the thermal heat sink for high-power LEDs.
LED high bay
Suspended high-bay industrial fixture with high-power LED sources.
LED high bay fixture
High-bay LED for industrial lighting with high ceilings.
LED HP (High Power)
Chip optimized for maximum luminous power per unit.
LED indicator
Low-power signaling LED; for the status of electronic equipment.
LED industry standard
Industry standard for interoperability and quality of LEDs.
LED infrarosso
Above 700 nm LED; for night vision, sensors, and remote controls.
LED innovation
Technological innovation in LED lighting: efficiency, spectrum, control.
LED installation best practice
Best practices for professional installation of LED systems.
LED integration architecture
Integration of LED lighting into the building's architecture.
LED junction
p-n junction of the semiconductor that emits light.
LED lamp
LED source with standardized base (E27, GU10, etc.) for direct replacement of traditional lamps.
LED lamp base
Base or cap of the LED lamp; various standards (E27, E14, GU10, G9).
LED lamp cap
Cap of the LED lamp; different standards (E27, GU10, G9, etc.).
LED lifetime prediction
Estimate of the useful lifetime based on LM-80 tests and TM-21 projection.
LED light bar
Rigid LED light bar for linear and backlighting applications.
LED light controller
Device for controlling LED lighting.
LED light engine
Complete LED module with chip, driver, and integrated optics.
LED light source
Light source based on LED; the core of any LED lighting system.
LED light strip kit
Complete kit with strip, power supply, and controller ready for installation.
LED lighting audit
Technical verification of the existing LED system for optimization.
LED lighting calculator
Tool for calculating illuminance and the number of LED fixtures.
LED lighting consultant
Consultant specialized in professional LED lighting.
LED lighting control system
Complete system for managing LED lighting.
LED lighting decorative
LED strip for aesthetic and atmospheric effects in the environment.
LED lighting efficace
LED system with high luminous efficacy and good distribution.
LED lighting flexible
LED strip on flexible substrate for curved surfaces.
LED lighting for outdoor
LED systems with IP protection for gardens, facades, and pathways.
LED lighting for furniture
LED strips integrated into furniture, bookcases, and furnishings.
LED lighting for indoor
LED systems for indoor residential and commercial environments.
LED lighting for kitchen
Complete LED system for the kitchen: under-cabinet, island, hood.
LED lighting for office
LED system for offices: low UGR, 500 lux, dimmable.
LED lighting industry
LED lighting industry; in constant growth and innovation.
LED lighting integrated
LED incorporated into the architecture as an integral part of the design.
LED lighting market
LED lighting market; dominates the sector with over 80% of sales.
LED lighting minimal
LED system with ultra-slim profiles and essential lines.
LED lighting hidden
LED strip completely hidden on the surface; only light visible.
LED lighting newsletter
Specialized newsletter on LED lighting news.
LED lighting of design
LED fixtures with refined design as furnishings.
LED lighting of service
Functional LED for technical and service areas.
LED lighting professional
Professional quality LED products for installers and designers.
LED lighting project
LED lighting project from design to installation.
LED lighting recessed invisible
Recessed and plastered LED profile; invisible when LED is off.
LED lighting regulation
Regulations applicable to LED lighting.
LED lighting residential
LED systems for private homes; comfort and atmosphere.
LED lighting retrofit
Replacement of existing lighting with LED technology.
LED lighting seminar
Training seminar on LED design and installation.
LED lighting show
LED lighting fair with exhibition of products and solutions.
LED lighting smart
Connected and remotely controllable LED system with app and voice.
LED lighting software
Software dedicated to the design and simulation of LED lighting.
LED lighting sustainable
LED products designed to minimize environmental impact.
LED lighting specification
Technical specification of LED lighting for a project.
LED lighting standard
Technical standards applicable to LED lighting.
LED lighting sustainability
Sustainability of LED lighting: energy, materials, recycling.
LED lighting technology
LED lighting technology: chips, phosphors, drivers, optics.
LED lighting terminology
Technical terminology of LED lighting; this glossary.
LED lighting to battery
Portable LED system powered by rechargeable battery.
LED lighting to low consumption
Strips and LED fixtures optimized for minimum energy consumption.
LED lighting to scomparsa
Completely hidden LED system that reveals itself only when the light is on.
LED lighting training course
Training course on LED lighting for professionals.
LED lighting trend
Current trend in LED lighting: linear, smart, circadian, COB.
LED lighting workshop
Practical workshop on installing and configuring LED systems.
LED lime
LED between green and yellow; for expanding the chromatic gamut.
LED linear
Arrangement of LEDs in a continuous line; typical of strips and rigid bars.
LED lumen output
Total luminous flux emitted by the LED system.
LED lumen output calculator
Tool for calculating the total luminous flux of the LED system.
LED luminaire classification
Classification of LED fixtures by type and application.
LED luminaire datasheet
Complete datasheet of the LED fixture.
LED luminaire design
Design of the LED fixture: source, driver, optics, enclosure.
LED luminaire test
Compliance and performance test on complete LED fixtures.
LED manufacturer
Manufacturer of LED components or systems.
LED market analysis
Analysis of the LED lighting sector market.
LED market share
Market share of LED lighting on the total of light sources.
LED matrix
Matrix of LEDs arranged in rows and columns for displays or effects.
LED mid-power
Mid-power LED (0.2-0.5W per chip); the most common type in professional LED strips (e.g., 2835, 3528).
LED module
Small board with one or more LEDs and integrated optics; used for signs, backlighting, and point lighting.
LED module assembly
Assembly of the LED module with chip, PCB, and optics.
LED module connector
Connector for connecting interchangeable LED modules.
LED module datasheet
Datasheet of the LED module with performance specifications.
LED module design
Design of the LED module for specific applications.
LED module efficiency
Efficacy of the complete LED module including PCB and interconnection losses.
LED module testing
Testing of the LED module: photometric, electrical, thermal.
LED mounting surface
Mounting surface prepared for the LED profile.
LED neon flex
Flexible silicone tube encasing an LED strip to simulate the appearance of traditional neon tubes.
LED neon rope
Flexible LED light cord simulating traditional neon.
LED Nichia
Japanese manufacturer of high-quality LED chips, pioneer in white LED technology.
LED of new generation
LED chips with efficiency and performance superior to previous versions.
LED of quality professional
LED products with specifications and reliability for professional use.
LED on/off cycle
On/off switching cycle; LEDs tolerate millions of cycles without degradation.
LED Osram
German manufacturer of LED chips and professional lighting solutions.
LED output stability
Stability of LED luminous flux over time and with temperature changes.
LED package substrate
Substrate of the LED package that supports the die and dissipates heat.
LED package type
Classification of the LED chip enclosure: SMD, COB, CSP, high-power.
LED panel
Flat fixture with LEDs distributed on a surface for uniform ceiling or wall lighting.
LED panel light
Flat panel with LEDs for uniform ceiling-mounted lighting.
LED par lamp
PAR (Parabolic Aluminized Reflector) LED lamp for accent lighting.
LED payback calculator
Calculator for the payback time of the LED investment.
LED pendant fixture
Suspended LED fixture from the ceiling; for direct or mixed lighting.
LED performance data
Measured performance data of the LED product.
LED performance monitoring
Monitoring of LED system performance over time.
LED performance test
Photometric, electrical, and thermal performance test of an LED product.
LED phosphor plate
Remote phosphor plate positioned at a distance from the LED chip.
LED photometric data
Measured photometric data of the LED fixture for simulation.
LED photometric file
.ies or .ldt file with the photometric data of an LED fixture.
LED pixel
Individually addressable LED that can assume any color; used for displays and LED matrices.
LED power calculator
Calculator for the total power of the LED system.
LED power supply design
Design of the power supply specific to the LED load.
LED power supply integrated
Power supply integrated into the LED profile or fixture.
LED product catalog
Complete catalog of the manufacturer's LED products.
LED product certification
Compliance certification of the LED product to standards.
LED product database
Database of LED products with technical specifications for the project.
LED product lifecycle
Life cycle of the LED product: development, production, sale, end of life.
LED product line
Line of LED products with common characteristics.
LED product portfolio
Complete portfolio of a manufacturer's LED products.
LED product range
Range of LED products available for different applications.
LED product selector
Tool for selecting the LED product suitable for the application.
LED product specification
Detailed technical specification of the LED product.
LED product warranty
Warranty of the LED product provided by the manufacturer.
LED profile
Extruded aluminum bar that houses the LED strip and the diffuser; ensures dissipation, protection, and aesthetic finish.
LED profile for bathroom
Profile with IP protection for LED lighting of the bathroom.
LED profile for corridor
LED profile for continuous lighting of corridors and hallways.
LED profile for indoor
Standard LED profile for installations in dry indoor environments.
LED profile for kitchen
LED profile for under-cabinet and task lighting in the kitchen.
LED profile for living-room
LED profile for indirect and atmospheric lighting in the living room.
LED profile for outdoor
LED profile with IP protection for outdoor installations.
LED profile for room
Slim LED profile for the lighting of the bedroom.
LED profile for shop
LED profile for lighting displays and shelves in retail.
LED profile for office
Suspended or recessed LED profile for efficient office lighting.
LED project budget
Budget of the LED lighting project.
LED project documentation
Complete documentation of the LED lighting project.
LED project management
Management of the LED lighting project.
LED project planning
Planning of the LED project: timelines, resources, budget.
LED project scope
Scope of the LED lighting project: environments, objectives, requirements.
LED project specification
Specification of the LED lighting project.
LED project timeline
Timeline of the LED project with milestones and deliveries.
LED recessed light
Recessed LED fixture for ceiling or wall.
LED reliability test
Long-term reliability test on LED components and systems.
LED replacement
Direct replacement of traditional sources with equivalent LEDs.
LED retrofit kit
Kit for converting traditional fixtures to LED.
LED retrofit lamp
LED lamp designed to directly replace a traditional lamp.
LED Samsung
Samsung's LED division, producing high-efficiency chips for professional strips.
LED sensor integration
Integration of sensors into the LED fixture for automatic control.
LED Seoul Semiconductor
Korean manufacturer known for SunLike technology with a spectrum similar to sunlight.
LED signage
Signs and illuminated signs made with LED technology.
LED smart bulb
Smart LED lamp with Wi-Fi or Zigbee connectivity.
LED solar light
LED fixture powered by an integrated solar panel.
LED specification sheet
Card with the detailed specifications of an LED product.
LED spectral data
Complete spectral data of an LED; provided by the chip manufacturer.
LED spotlight
LED spotlight for accent lighting with a concentrated beam.
LED spotlight on track
LED spotlight mounted on an electrified track for adjustable lighting.
LED step light
LED light for steps and stairs; safety and decoration.
LED street light
LED fixture for street lighting.
LED strip
Flexible printed circuit (FPCB) with surface-mounted SMD LEDs, adhesive on the back; the basic component of linear lighting.
LED strip 120 LED/m
LED strip with a density of 120 LED chips per meter.
LED strip 12V
Strip powered at 12V DC; shorter cutting segments but more subject to voltage drop.
LED strip 12V specification
Complete technical specifications of the LED strip powered at {v} DC.
LED strip 14.4 W/m
LED strip with a consumption of 14.4 Watts per linear meter.
LED strip 180 LED/m
LED strip with a density of 180 LED chips per meter.
LED strip 19.2 W/m
LED strip with a consumption of 19.2 Watts per linear meter.
LED strip 2200K
LED strip with a fixed color temperature of 2200K.
LED strip 230V
Strip powered directly by the mains voltage with a rectifier; for very long outdoor linear installations.
LED strip 24 W/m
LED strip with a consumption of 24 Watts per linear meter.
LED strip 240 LED/m
LED strip with a density of 240 LED chips per meter.
LED strip 2400K
LED strip with a fixed color temperature of 2400K.
LED strip 24V
Strip powered at 24V DC; the best compromise between cuttability and maximum connectable length.
LED strip 24V specification
Complete technical specifications of the LED strip powered at {v} DC.
LED strip 2700K
LED strip with a fixed color temperature of 2700K.
LED strip 28.8 W/m
LED strip with a consumption of 28.8 Watts per linear meter.
LED strip 30 LED/m
LED strip with a density of 30 LED chips per meter.
LED strip 3000K
LED strip with a fixed color temperature of 3000K.
LED strip 3500K
LED strip with a fixed color temperature of 3500K.
LED strip 352 LED/m
LED strip with a density of 352 LED chips per meter.
LED strip 36 W/m
LED strip with a consumption of 36 Watts per linear meter.
LED strip 4.8 W/m
LED strip with a consumption of 4.8 Watts per linear meter.
LED strip 4000K
LED strip with a fixed color temperature of 4000K.
LED strip 4500K
LED strip with a fixed color temperature of 4500K.
LED strip 48 W/m
LED strip with a consumption of 48 Watts per linear meter.
LED strip 480 LED/m
LED strip with a density of 480 LED chips per meter.
LED strip 48V
Strip powered at 48V DC; allows very long runs with minimal voltage drop.
LED strip 48V specification
Complete technical specifications of the LED strip powered at {v} DC.
LED strip 5000K
LED strip with a fixed color temperature of 5000K.
LED strip 512 LED/m
LED strip with a density of 512 LED chips per meter.
LED strip 5700K
LED strip with a fixed color temperature of 5700K.
LED strip 5V
5V DC strip; for addressable (WS2812B) and USB.
LED strip 5V specification
Complete technical specifications of the LED strip powered at {v} DC.
LED strip 60 LED/m
LED strip with a density of 60 LED chips per meter.
LED strip 6500K
LED strip with a fixed color temperature of 6500K.
LED strip 700 LED/m
LED strip with a density of 700 LED chips per meter.
LED strip 9.6 W/m
LED strip with a consumption of 9.6 Watts per linear meter.
LED strip 90 LED/m
LED strip with a density of 90 LED chips per meter.
LED strip biadesiva
Strip with adhesive tape already applied for direct mounting.
LED strip catalog
List of all available LED strips with specifications and prices.
LED strip COB
Strip with LED chips mounted at minimum distance without visible points; produces a continuous and uniform line of light.
LED strip compatible profile
LED strip with dimensions and characteristics suitable for the chosen profile.
LED strip cutter
Tool for precise cutting of the LED strip at designated points.
LED strip double fila
LED strip with two parallel rows of chips for doubled flux.
LED strip economica
Base-level LED strip for non-critical decorative applications.
LED strip flexible
LED strip on a flexible substrate that adapts to curved surfaces.
LED strip for applications professional
High-quality LED strip for professional installations.
LED strip for backlighting
LED strip for backlighting panels and displays.
LED strip for cove
LED strip for indirect lighting in architectural coves.
LED strip for cove ceiling-mounted
LED strip specifically for indirect lighting in ceiling coves.
LED strip for direct lighting
Directly visible LED strip; requires COB or high density.
LED strip for edge mobile
LED strip for lighting the edge of furniture and shelves.
LED strip for false ceiling
LED strip specifically for integration into suspended ceilings.
LED strip for indirect lighting
LED strip directed towards the ceiling or wall for diffused light.
LED strip for indoor
IP20 LED strip for installation in dry indoor environments.
LED strip for mobili
LED strip specifically for interior and exterior lighting of furniture.
LED strip for niche
LED strip for accent lighting in niches.
LED strip for outdoor
LED strip with IP65 or higher protection for outdoor installation.
LED strip for professionisti
Professional quality LED strip for installers and lighting designers.
LED strip for retro TV
LED strip for bias lighting behind the television.
LED strip for scale
LED strip for lighting the steps of stairs and staircases.
LED strip for specchi
LED strip for perimeter or rear lighting of mirrors.
LED strip for under letto
LED strip for low-level nighttime courtesy lighting under the bed.
LED strip for veletta
LED strip for indirect lighting in the cove of the suspended ceiling.
LED strip for vetrine
LED strip for internal lighting of display windows.
LED strip high power
LED strip with consumption above 19.2 W/m for primary lighting.
LED strip holder
Support that holds the LED strip in position in the profile.
LED strip IP20
Strip without protection; only for dry indoor use.
LED strip IP65
Strip with silicone coating on the upper surface; protected from dust and water jets.
LED strip IP67
Strip completely encapsulated in a silicone sheath; protected from dust and temporary immersion.
LED strip IP68
Strip with hermetic encapsulation for permanent immersion; suitable for swimming pools and fountains.
LED strip low power
LED strip with consumption below 5 W/m for decorative lighting.
LED strip made in Italy
LED strip produced in Italy with local quality control.
LED strip media power
LED strip with consumption between 9.6 and 14.4 W/m for general lighting.
LED strip of quality
Professional LED strip with branded LED chips, tight binning, and copper PCB.
LED strip on measures
LED strip cut to the exact length required by the project.
LED strip pitch
Distance between consecutive LEDs on the strip; influences uniformity.
LED strip professional
High-end LED strip for professional and architectural installations.
LED strip reel
Roll of LED strip; standard packaging of 5 or 10 meters.
LED strip RGBA
Strip with red, green, blue, and amber LEDs for an extended gamut.
LED strip single fila
LED strip with a single row of chips; standard configuration.
LED strip soldering guide
Guide for professional soldering of LED strip contacts.
LED strip tagliabile
LED strip with predefined cutting points for customization.
LED strip test
Functional verification of the LED strip before installation.
LED strip to cool light
LED strip with cool CCT (5500-6500K) for technical environments.
LED strip to high color rendering
LED strip with CRI above 90 for color fidelity.
LED strip to high efficiency
LED strip with efficacy above 160 lm/W.
LED strip to light neutra
LED strip with neutral CCT (4000-4500K) for multifunctional environments.
LED strip to warm light
LED strip with warm CCT (2200-3500K) for residential environments.
LED strip to the metro
Sale of LED strips priced per linear meter.
LED strip ultra thin
LED strip with reduced PCB thickness for minimal installations.
LED strip width
Width of the LED strip: 5, 8, 10, 12, 15 mm; determines compatibility with the profile.
LED strip with chip Bridgelux
LED strip with high-efficiency Bridgelux LED chips.
LED strip with chip Cree
LED strip with high-efficiency Cree LED chips.
LED strip with chip Lumileds
LED strip with Luxeon chips from Lumileds for professional performance.
LED strip with chip Nichia
LED strip with high-reliability Nichia LED chips.
LED strip with chip Osram
LED strip with German-quality Osram LED chips.
LED strip with chip Samsung
LED strip with high-efficiency Samsung LED chips.
LED strip with chip Seoul
LED strip with Seoul Semiconductor SunLike chips for a natural spectrum.
LED strip with warranty
LED strip with manufacturer's warranty on performance and duration.
LED surface mount
Surface-level mounting of the LED profile; applied directly to the surface.
LED system autonomo
LED system with solar panel and battery; independent from the grid.
LED system centralized
LED system managed from a central controller for the entire building.
LED system chiavi in mano
Complete solution from design to delivery of the LED system.
LED system complete
LED system with all components: strips, profiles, drivers, controllers.
LED system decentralizzato
LED system with local controllers independent for each zone.
LED system design
Complete design of the LED system: source, driver, optics, thermal, control.
LED system domotico
LED system integrated into home automation for smart control.
LED system efficient
LED system optimized for the maximum performance/consumption ratio.
LED system for abitazione
Complete residential LED lighting for the whole house.
LED system for restaurant
LED lighting for restaurants with scenes and dimming.
LED system for shop
Commercial LED lighting for shops with displays and shelves.
LED system for office
LED lighting for offices compliant with EN 12464-1.
LED system integrated
LED system with all coordinated and compatible components.
LED system to standard
LED installation compliant with all applicable regulations.
LED tape
Informal synonym for LED strip; LED tape.
LED technology evolution
Evolution of LED technology from the first red diode to the 300 lm/W chip.
LED test report
Report of test results on an LED product.
LED thermal design guide
Guide to thermal design for LED systems.
LED thermal model
Thermal model for the simulation of temperature in the LED system.
LED thermal pad
Thermally conductive pad between the LED PCB and the heat sink.
LED transformer
See Power supply. Conversion device for LED strips.
LED troffer fixture
Rectangular LED fixture recessed in modular suspended ceilings.
LED tube
LED tube replacing T5 or T8 fluorescent tubes.
LED tube lamp
LED tube replacing linear fluorescent lamps.
LED tube T5/T8
LED tube replacing fluorescents; not related to LED strips.
LED under shelf
LED lighting mounted under shelves to enhance objects.
LED uplight fixture
LED fixture emitting light upwards for indirect lighting.
LED UV
Ultraviolet LED for sterilization, curing, and fluorescence.
LED vanity mirror
Mirror with integrated perimeter LED lighting.
LED video wall
Video wall composed of LED panels for multimedia content.
LED voltage tester
Instrument for verifying voltage in the LED circuit.
LED wafer
Semiconductor wafer on which thousands of LED dies are fabricated.
LED wall light
Wall-mounted LED sconce for wall-mounted lighting.
LED wall mount
Wall mounting of LED profiles or fixtures.
LED warranty conditions
Specific warranty conditions for LED products.
LED wash light
LED fixture for uniform lighting of surfaces.
LED waterfall
Decorative LED installation simulating a luminous waterfall.
LED well light
LED fixture recessed in the ground for garden lighting.
LED worklight
Portable LED light for construction sites and work areas.
LED-to-LED spacing
Distance between consecutive LED chips on the strip.
LEED certification
Sustainable building certification; LED lighting contributes to credits.
Lega of aluminum (series 6000)
Al-Mg-Si alloy used for LED profiles; offers good extrudability, strength, and thermal conductivity.
Legacy system
Pre-existing lighting system to be replaced with LEDs.
Legge inverso of the quadrato
Illuminance decreases with the square of the distance from the LED source.
Legge of Beer-Lambert
Law of light absorption in materials; for calculating diffuser opacity.
Legge of Lambert
Cosine distribution of luminous intensity; typical of LEDs without optics.
Legge of Ohm
V = I x R; fundamental for calculating LED circuits.
Legge of Planck
Spectral distribution of blackbody radiation; reference for LED CCT.
Legge of Snell
Law of refraction; for calculating the behavior of light in LED lenses.
Legge of Stefan-Boltzmann
Law of thermal radiation; for calculating dissipation by radiation from LED profiles.
Legge of Wien
Law linking the emission peak to temperature; for LED CCT.
Legislation (LED)
Regulations and legislation applicable to LED products.
Length maximum of the strip
Maximum footage connectable in a single run without voltage drop or overheating problems.
Length maximum strip 12V
Maximum connectable length of 12V LED strip without excessive drop; typically 5 m.
Length maximum strip 24V
Maximum length of 24V LED strip; typically 10 m.
Length maximum strip 48V
Maximum length of 48V LED strip; typically 20 m.
Length of wave (nm)
Distance between two crests of the electromagnetic wave; determines the perceived color of LED light.
Length of wave of picco
Wavelength at which the LED emits maximum power.
Length of the diffuser
Measurement of the LED profile cover; to be cut to the length of the profile.
Length of the LED profile
Longitudinal measurement of the LED profile; typically 1, 2, or 3 meters.
Length of the LED strip
Total measurement of the LED strip required for the project.
Length tagliabile strip
Length of the minimum cuttable segment of the LED strip.
Lens
Optical element placed above the LED chip to concentrate, diffuse, or direct the luminous beam.
Lens acrilica LED
PMMA lens for LED beam control.
Lens array
Matrix of micro-lenses positioned above an LED strip for beam control.
Lens asimmetrica
Optics directing the LED beam predominantly in one direction; for wall-washing.
Lens cap
Protective cap of the lens of a high-power LED.
Lens collimante
Optics transforming the divergent light of the LED into an almost parallel and concentrated beam.
Lens diffuser combo
Optical element combining lens and diffuser for optimized distribution.
Lens efficiency
Efficiency of the LED lens: ratio of output light to input light.
Lens Fresnel
Flat lens with concentric rings for focusing LED light; used in spotlights and projectors.
Lens holder
Support holding the secondary lens above the LED.
Lens in glass LED
Glass lens for premium LED fixtures; maximum transparency.
Lens in policarbonato LED
Impact-resistant PC lens for LED fixtures.
Lens in silicone LED
Optical silicone lens for high-power LED chips.
Lens mount
Support for secondary lenses to be applied to the LED source.
Lens shift
Displacement of the lens relative to the optical axis to decenter the LED beam.
Lens TIR
Total internal reflection lens for controlling the beam with high efficiency.
Lens to barilotto
Convex lens focusing the LED beam in a narrow angle.
Lens type
Type of LED lens: collimating, Fresnel, TIR, asymmetrical, diffusing.
Level crossing (signal)
Zero level crossing of the signal; for dimmer synchronization.
Level of comfort LED
Degree of visual wellness guaranteed by LED lighting.
Level of illuminance minimum
Lowest LED illuminance value on the target surface; for uniformity.
Level of illuminance recommended
Recommended illuminance value in lux by the standard for each type of environment.
Level of LED light
Quantity of LED light in the environment; measured in lux on the work surface.
Level sensor
Light level sensor for daylight harvesting.
Lever connector
Connector with locking lever for quick connection of LED cables.
Lextar chip
LED chip from Taiwanese manufacturer Lextar for general lighting.
Library (fotometrica)
Archive of IES/LDT photometric files of LED fixtures for simulation.
Library LED
LED lighting for libraries; high uniformity and low UV emission.
Bookshelf illuminata LED
Bookcase with integrated LED strip for lighting books.
License plate light LED
LED license plate light for vehicles; technology parallel to automotive strips.
Life cycle analysis (LCA)
Analysis of the environmental impact of LED lighting throughout its complete life cycle.
Life cycle cost
Total cost of LED lighting over its life cycle: purchase, energy, maintenance.
Lifetime factor
Factor applied in lighting calculation to account for LED degradation.
Lifetime hours
Operating duration in hours declared by the LED manufacturer (e.g., 50,000 h L70).
Lifetime media LED
Average lifetime of a batch of LEDs; 50% have reached the L70 criterion.
Lifetime of the battery emergency
Duration of the battery of the emergency LED module; typically 4-5 years.
Lifetime of the diffuser
Duration of the LED diffuser before significant yellowing.
Lifetime of the LED profile
Duration of the aluminum profile; practically unlimited if protected.
Lifetime of the LED strip
Duration of the LED strip; typically 50,000 hours at L70 under correct conditions.
Lifetime of the power supply
Duration of the LED power supply; typically 50,000-100,000 hours under nominal conditions.
Lifetime operativa LED strip
Duration in hours of the LED strip before reaching the L70 criterion.
Lifetime operativa power supply
Duration in hours of the LED power supply under operating conditions.
Lifetime utile (L70/L80/L90)
Operating duration of the LED expressed in hours until a certain percentage of residual flux is reached.
Lifetime utile L70
Hours of operation after which the LED maintains 70% of the initial flux.
Lifetime utile L80
Hours of operation after which the LED maintains 80% of the initial flux.
Lifetime utile L90
Hours of operation after which the LED maintains 90% of the initial flux.
LiFi
Data communication technology via high-frequency modulated LED light; optical alternative to Wi-Fi.
Lift platform LED
LED lighting for lifting platforms and elevators.
Light welcoming LED
Warm and soft LED lighting for welcoming environments.
Light adequate to the environment LED
LED lighting calibrated for the type of room.
Light adequate to the task LED
LED lighting calibrated for the type of activity performed.
Light art
Art forms using LED light as an expressive medium.
Light art installation
Work of art created with LED strips and modules.
Light assembly
Set of assembled LED components ready for installation.
Light badge
Luminous LED badge for identification and signaling.
Light bar
Rigid LED light bar for linear applications.
Light beam ceiling
Ceiling with integrated LED luminous beams.
Light blade
Thin and long LED profile creating a blade of light.
Light bleeding
Unwanted light leakage from edges or joints.
Light blue
Spectral component of white LEDs (~450 nm); discussed for possible effects on the circadian rhythm.
Light box
Luminous LED box for signs, displays, and backlighting.
Light bridge
Luminous LED structure connecting two architectural points.
Light calculation
Lighting calculation for sizing the LED system.
Light canopy
Luminous LED canopy for entrances and covered areas.
Light ceiling tile
Luminous LED tile for modular suspended ceilings.
Light channel
Continuous LED light channel for architectural linear lighting.
Light colored LED
LED light of any color obtained with RGB or monochromatic chips.
Light column
Luminous LED column for decorative vertical lighting.
Light commissioning report
Testing report of the LED system after installation.
Light concentrated LED
Narrow LED beam focused on a point for accent lighting.
Light cone
Cone of light emitted from an LED source; defined by the beam angle.
Light continuous LED
LED strip producing a line of light without visible points; COB.
Light continuous without points LED
Dot-free effect achieved with COB or very-high-density strips.
Light control film
Optical film applied to the diffuser for controlling light distribution.
Light cove detail
Construction detail of the luminous LED cove for the drywall contractor.
Light crown
Suspended luminous LED crown; for reception and representative spaces.
Light curtain
Luminous curtain made with vertical LED strips; for decoration.
Light cycle (biologia)
Lighting cycle for plant growth; managed by LED grow lights.
Light direct
Light emitted from the LED source directly towards the surface to be illuminated, without intermediate reflections.
Light direction
Main direction of the LED light beam.
Light distribution
Way in which the light emitted from an LED fixture is distributed in space; defined by the photometric curves.
Light distribution curves
See Curves of light distribution.
Light diurna simulata LED
Full-spectrum LED with variable CCT simulating daylight.
Light dome
Luminous LED dome for decorative or architectural lighting.
Light efficient LED
LED lighting producing maximum flux with minimum consumption.
Light emitting area
Area of the LED surface that emits light.
Light engine
Complete LED module (chip + integrated driver) ready to be inserted into a fixture.
Light environment LED
General LED lighting that uniformly fills the space.
Light field
Three-dimensional luminous field created by the LED system in an environment.
Light fixture catalog
Catalog of the manufacturer's LED products with specifications and photographs.
Light float
Floating LED fixture for decorative lighting of pools.
Light for bathroom LED
LED lighting specifically for bathrooms with IP protection.
Light for corridor LED
LED lighting for corridors with presence sensors.
Light for kitchen LED
LED lighting for kitchens with under-cabinet task lighting.
Light for living-room LED
LED lighting for living rooms with scenes and atmosphere.
Light for quadri LED
LED lighting for paintings and works of art; low UV and high CRI.
Light for room LED
LED lighting for bedrooms with warm CCT and dimming.
Light for scale LED
LED lighting for stairs with strip on steps or profiles in the handrail.
Light for office LED
LED lighting for offices compliant with standards.
Light frame
Luminous LED frame for mirrors, paintings, or displays.
Light functional LED
LED lighting designed for a specific visual task.
Light gradient effect
Luminous gradient effect from maximum to minimum along a surface.
Light graze angle
Grazing angle of LED light on a textured surface.
Light integrated LED
LED lighting integrated into the architecture as part of the design.
Light integration sphere
Integrating sphere for measuring the total luminous flux of LEDs.
Light intensity map
Map of the luminous intensity of LEDs on a target surface.
Light level
Illuminance level at a specific point; measured in lux.
Light level meter
Instrument for measuring illuminance level; luxmeter.
Light line
Continuous luminous line created with LED profiles and strips.
Light linear
Continuous and uniform luminous effect generated by LED strips in profiles with diffuser; a trend in interior design.
Light loss factor (LLF)
Overall luminous loss factor accounting for maintenance and degradation.
Light management gateway
Gateway for connecting the LED system to the building management network.
Light meter app
Smartphone application for measuring illuminance levels.
Light mixing
Mixing of colors from multiple LED sources to obtain a homogeneous shade.
Light soft LED
Diffused and uniform LED lighting without harsh shadows.
Light hidden LED
LED strip completely hidden on the surface; only the luminous effect is visible.
Light natural (simulation)
Full-spectrum and tunable CCT LEDs reproducing the variations of daylight for wellness.
Light natural and LED
Optimal combination of natural light and LED lighting.
Light neutra equilibrata LED
4000K LED lighting for multifunctional environments.
Light nighttime LED
Low-intensity LED lighting for night hours.
Light of accent LED
Focused LED lighting to enhance an object or detail.
Light of atmosphere LED
Soft and warm LED lighting to create ambiance.
Light of cortesia LED
Low-intensity LED lighting for nighttime orientation.
Light of cortesia LED for scale
Low-brightness LED strip for nighttime lighting of stairs.
Light of cortesia nighttime LED
Low-brightness LED strip for nighttime orientation.
Light of design LED
LED fixture with refined design for premium furnishings.
Light of emergency LED
LED lighting with battery that activates during blackout.
Light of safety LED
Emergency LED lighting indicating escape routes.
Light of service LED
Functional LED lighting for technical and maintenance areas.
Light omogenea LED
Uniform distribution of LED light without bright or dark areas.
Light adjustable LED
LED spotlight with adjustable beam for accent lighting.
Light output
Total luminous flux emitted from an LED fixture; in lumens.
Light painting
Photographic technique using LED strips moved in front of the camera.
Light panel ceiling
Ceiling composed of luminous LED panels for uniform lighting.
Light partition
Luminous dividing wall for open-plan environments.
Light pattern
Diagram of the light distribution projected by an LED fixture on a surface.
Light perimetrale ceiling
LED strip along the perimeter of the ceiling for indirect lighting.
Light perimetrale LED
LED strip along the perimeter of the environment to define its contours.
Light pipe
Rigid or flexible light guide transporting LED light from one point to another without dispersion.
Light plan
Lighting design project complete with positioning, powers, and calculations.
Light planner
Professional specialized in the design of LED lighting.
Light polarizzata
LED light filtered to oscillate in a single plane; used in specialized applications and displays.
Light pole foundation
Foundation for outdoor LED lighting poles.
Light pollution (pollution luminous)
Dispersion of light into the environment; to be minimized with full cutoff.
Light preset button
Button on the LED controller for recalling a preset scene.
Light priva of UV LED
White LED with negligible ultraviolet component; for museums and works of art.
Light programming
Programming of luminous scenes and effects on the LED.
Light puntuale
Lighting concentrated on a point via focusing optics.
Light quality
Set of parameters defining the quality of light: CRI, CCT, flicker, uniformity.
Light radente
Lighting at a low angle on a surface.
Light receptor
Sensor detecting light for automatic control of the LED system.
Light ring
Luminous LED ring; for mirrors, photography, and decorative lighting.
Light scatter
Scattering of light in the diffuser or in the atmosphere.
Light scene
See Scena luminous. Combination of memorized lighting parameters.
Light sensor calibration
Calibration of the light sensor for LED daylight harvesting.
Light shelf
Reflective shelf redirecting natural or LED light towards the ceiling.
Light shield
Screen blocking LED light in a specific direction.
Light show
Light show created with addressable LED strips and fixtures.
Light slot
Luminous slot in the ceiling, wall, or floor for recessed LED profiles.
Light soffusa LED
Soft and delicate LED lighting for relaxation environments.
Light source module
Interchangeable LED light source module; Zhaga standard.
Light spectrum analyzer
Instrument for analyzing the LED emission spectrum.
Light spot LED
Concentrated LED beam for point accent lighting.
Light strip connector
Connector for quick connection of LED strips.
Light task LED
Directional LED lighting for the visual task: reading, kitchen, work.
Light therapy lamp
LED lamp for phototherapy; treatment of seasonal affective disorder.
Light to day LED
LED lighting with CCT and intensity simulating natural light.
Light to high CCT LED
LED lighting with cool temperature above 5000K.
Light to lama LED
Thin and defined LED beam for architectural light cuts.
Light to low CCT LED
LED lighting with warm temperature below 3000K.
Light to media CCT LED
LED lighting with neutral temperature 3500-4500K.
Light tower
Luminous LED tower for lighting construction sites and large areas.
Light transmission
Transmission of light through the diffuser; expressed as a percentage.
Light tree
Decorative luminous tree made with LED strips.
Light trespass
Unwanted LED light invading an adjacent property.
Light tunnel
Luminous LED gallery for immersive effects.
Light under mobile LED
LED strip under furniture for a floating effect and floor lighting.
Light under the letto LED
LED strip under the bed for nighttime courtesy lighting.
Light uniform LED
Uniform LED light distribution over the entire surface.
Light uniformity ratio
Ratio between minimum and average illuminance on a surface.
Light valve
Optical valve regulating the passage of LED light.
Light wall-wash LED
Uniform LED distribution on a vertical wall.
Light wash effect
Effect of LED light flowing over a surface like a wave.
Light well
Light well with integrated LED strip for vertical lighting of stairs.
Light white LED
LED light obtained from phosphor conversion of the blue chip.
Light year (unit)
Astronomical unit; not related to LEDs but used metaphorically in marketing.
Lighting accent (of accent)
Light focused on an object or architectural detail to create contrast and attract attention.
Lighting accentuata
Accent LED lighting with a 3:1 or 5:1 ratio compared to the environment.
Lighting adattiva
LED lighting automatically adapting to conditions and needs.
Lighting adequate
LED lighting meeting regulatory requirements for illuminance and comfort.
Lighting angle bar
LED for home bar angles; warm CCT and dimmable.
Lighting angle lettura
LED task for reading corners; directional and dimmable light.
Lighting anti-panico
Emergency LED lighting to prevent panic in open spaces.
Lighting antibagno
LED for hallways; IP44 and motion sensor.
Lighting architetturale
Use of LED light as an integrated element in the architectural project to enhance volumes and surfaces.
Lighting archivio
LED for archives and storage; efficiency and sensors.
Lighting as service LED
LaaS business model with LED lighting on subscription.
Lighting as to Service (LaaS)
Business model with LED lighting provided as a subscription service.
Lighting ascensore
LED for elevator cabins; slim profiles and anti-vandalism.
Lighting audit report
Report of the energy audit of the LED lighting of a building.
Lighting automation
Automation of LED lighting via sensors, timers, and programmed logic.
Lighting autorimessa
LED for garages; high uniformity and presence sensors.
Lighting banco sale
LED for sales counters; food lighting and high CRI.
Lighting bar
LED for bars; atmosphere with colors and dimming.
Lighting bathroom turco
LED resistant to steam for Turkish baths and hammams.
Lighting bidirezionale
LED fixture emitting light both downwards and upwards.
Lighting bilanciata
Balanced LED lighting between direct and indirect light.
Lighting biotopo
LED lighting for aquariums and terrariums simulating natural conditions.
Lighting bollard
Luminous LED bollard for pathways and gardens.
Lighting boutique
LED for boutiques; high CRI and scenes for fashion.
Lighting box auto
LED for garages; IP65 and door sensor.
Lighting bus
Communication bus dedicated to lighting (DALI, DMX).
Lighting cabin doccia
IP65 LED for the interior of the shower cabin.
Lighting cabin telefonica
LED for telephone booths and acoustic boxes; compact and uniform.
Lighting calculation
Design based on photometric data to determine the number and position of necessary LED sources.
Lighting camerino
LED for fitting rooms in stores; high CRI and natural CCT.
Lighting campo from tennis
LED for tennis courts; high uniformity and anti-flicker.
Lighting campo of calcio
LED for football fields; very high power and uniformity.
Lighting canile
LED for kennels and animal shelters; resistant and efficient.
Lighting carbon neutral
LED system powered by renewable sources with zero emissions.
Lighting casello
LED for toll booths; high visibility.
Lighting cell frigorifera
LED for cold rooms; resistant to low temperatures.
Lighting centrata on the persona
See Human Centric Lighting; LED lighting for wellness.
Lighting channel
Communication channel for the control of LED lighting.
Lighting chiesa
LED for churches; respecting architecture and low UV.
Lighting chirurgica
Very-high-CRI LED for operating rooms.
Lighting cinetica
LED installation with moving elements for dynamic effects.
Lighting circadiana
Lighting following the day/night biological rhythm.
Lighting circuit
Electrical circuit dedicated to powering LED fixtures.
Lighting class (stradale)
Classification of roads for sizing public LED lighting.
Lighting classic stile
LED integrated in fixtures with classic and decorative design.
Lighting commercial
LED for shops, offices, and commercial spaces; efficiency and comfort.
Lighting commissioning
Testing and commissioning process of the LED system.
Lighting consultant
Professional specialized in lighting consulting.
Lighting contatore
LED for meter rooms; compact and resistant.
Lighting contractor
Installation company specialized in LED installations.
Lighting control
Hardware and software system for lighting management: dimming, scenes, automation.
Lighting control interface
Hardware/software interface for LED lighting control.
Lighting control panel
Centralized control panel for managing LED lighting.
Lighting control protocol
Communication protocol for LED control: DALI, DMX, KNX, Zigbee.
Lighting control relay
Relay dedicated to switching LED circuits in the electrical panel.
Lighting control sensor
Sensor for automatic control of LED lighting.
Lighting control strategy
LED control strategy to maximize savings and comfort.
Lighting control system architecture
Architecture of the LED control system: centralized, distributed, hybrid.
Lighting control zone
Zone of the building with independently controlled LED lighting.
Lighting controller
Hardware device for managing LED lighting.
Lighting cornice
LED strip in a cornice for perimeter indirect light.
Lighting corridor hospital
LED for hospital corridors; emergency and comfort.
Lighting corridor hotel
LED for hotel corridors; sensors and elegant scenes.
Lighting cortile condominiale
LED for condominium courtyards; efficiency and twilight sensors.
Lighting cost analysis
Cost analysis of LED lighting: investment, operation, maintenance.
Lighting cromoterapica
RGB LED for chromotherapy in spas and wellness centers.
Lighting deposito
LED for storage and warehouses; efficiency and sensors.
Lighting design
Design discipline studying the quality, quantity, and distribution of LED light in environments.
Lighting designer
Professional specialized in the design of LED lighting.
Lighting diffused uniform
LED with uniform distribution throughout the environment.
Lighting dimmable
LED system with brightness adjustment capability.
Lighting direzionale
LED with a concentrated beam for accent lighting.
Lighting disimpegno
LED for hallways and passages; presence sensor.
Lighting distribution
Distribution of LED light in space; defined by photometric curves.
Lighting domestica
LED for residential environments; comfort and atmosphere.
Lighting edge pool
LED for pool edges; IP67 and low-level installation.
Lighting efficace LED
LED system achieving the objectives with minimum resources.
Lighting efficacy requirement
Minimum luminous efficacy requirement imposed by energy regulations.
Lighting efficient
LED with a high lumen/watt ratio for energy savings.
Lighting electrical panel
LED for the interior of electrical panels; compact and functional.
Lighting energy savings
Energy savings obtained by switching to LED.
Lighting engineering
Engineering of LED lighting; specialized technical discipline.
Lighting environmental
General diffused lighting providing the base luminous level of an environment.
Lighting equipment
Equipment for LED lighting: sources, drivers, optics, controls.
Lighting fienile
LED for renovated barns; rustic style with surface-mounted profiles.
Lighting fixture schedule
Detailed list of all LED fixtures planned in a project.
Lighting flexible
Reconfigurable LED system for different uses of the environment.
Lighting food court
LED for food court areas; food lighting and atmosphere.
Lighting functional
LED designed for a specific visual task; task lighting.
Lighting gradevole
LED with comfort parameters: low UGR, high CRI, no flicker.
Lighting guardiola
LED for guardhouses and porter's lodges; compact and functional.
Lighting hood kitchen
LED integrated in the kitchen range hood.
Lighting ibrida
Combination of LED light and natural light in the environment.
Lighting immersiva
LED completely enveloping the space for sensory experiences.
Lighting input palazzo
LED for building entrances; scenes and sensors.
Lighting installation standard
Standard for the proper installation of LED installations.
Lighting integrated LED
LED system integrated into the building's architecture.
Lighting intelligent
LED with sensors, automation, and connectivity for smart management.
Lighting interattiva
LED reacting to presence, gestures, or user input.
Lighting isola kitchen
Suspended or recessed LED for the kitchen island.
Lighting kitchen isola
Suspended LED above the kitchen island; dimmable.
Lighting kitchen professional
LED for professional kitchens; IP65 and high CRI.
Lighting laboratory orafo
LED for goldsmithing; very high CRI and task lighting.
Lighting lateral
LED illuminating a surface from the side; for depth effects.
Lighting layout
Plan layout of LED fixtures in a project.
Lighting level standard
Standard defining recommended illuminance levels for each environment type.
Lighting linear
Fixture or LED system generating a continuous line of light; achieved with profiles and LED strips.
Lighting linear ceiling-mounted
Linear LED profiles mounted on the ceiling for general lighting.
Lighting linear sospesa
Suspended linear LED profiles for direct-indirect lighting.
Lighting linear wall-mounted
Linear LED profiles mounted on the wall for functional lighting.
Lighting locale caldaia
LED for boiler rooms; resistant and functional.
Lighting maintenance schedule
Program of periodic maintenance of the LED system.
Lighting management system
Software system for centralized management of LED lighting.
Lighting master plan
General plan of LED lighting for an entire building or urban area.
Lighting mista
Combination of different types of LED fixtures in the same environment.
Lighting modular
Composable LED system with interchangeable elements.
Lighting monocromatica
LED emitting a single color for specific applications.
Lighting multicolore
RGB or RGBW LED for creating chromatic scenes.
Lighting natural simulata
Full-spectrum LED reproducing the spectrum of sunlight.
Lighting needs assessment
Assessment of lighting needs for LED design.
Lighting nighttime outdoor
Low-brightness LED for nighttime lighting of gardens and facades.
Lighting nursery
LED for nurseries; safe, colored, and dimmable.
Lighting of cortesia
Low-brightness LED for indicating paths and exits.
Lighting of detail
LED focused on an architectural detail or an object.
Lighting of facade to colors
RGB LED for facades with dynamic chromatic scenes.
Lighting of quality LED
LED system with high parameters: CRI>90, flicker-free, low UGR.
Lighting of quality upper LED
LED system with excellent parameters: CRI>95, flicker-free, low UGR.
Lighting of safety
Subcategory of emergency indicating escape routes.
Lighting of transition
LED in passage zones between environments with different levels.
Lighting of the paesaggio
LED for parks, gardens, and green spaces; integration with the landscape.
Lighting of the patrimonio
LED for historic buildings and monuments; discreet integration.
Lighting on measures
LED system designed and configured for the specific needs of the project.
Lighting optimal
LED lighting meeting all regulatory and comfort requirements.
Lighting outdoor villa
LED for outdoor lighting of villas; facades and gardens.
Lighting panificio
LED for bakeries; food lighting and heat resistance.
Lighting passerella fashion
LED for fashion runways; high power and excellent CRI.
Lighting performance indicator
Key performance indicator of LED lighting (KPI).
Lighting perimetrale
LED strips installed along the perimeter of a room or piece of furniture to define luminous contours.
Lighting custom
LED system configured according to the user's specific preferences.
Lighting pet shop
LED for pet shops; suitable spectrum and resistant.
Lighting pizzeria
LED for pizzerias; food lighting and warm atmosphere.
Lighting plan
Technical drawing with positioning and specifications of all LED light points.
Lighting plan bar
LED for bar counters; warm atmosphere and dimmable.
Lighting portone
LED for entrance doors; twilight sensor and presence.
Lighting posta pneumatica
LED for pneumatic transport systems; indicators.
Lighting power budget
Power budget allocated for LED lighting in the energy project.
Lighting power density (LPD)
Installed LED power per square meter (W/m2); efficiency indicator.
Lighting prescription
Detailed lighting specification for purchasing LED products.
Lighting product certification
Compliance certification of LED products to applicable standards.
Lighting puntuale decorative
LED focused on a decorative object to enhance it.
Lighting quality metric
Metric for evaluating the quality of LED lighting: CRI, CCT, UGR, flicker.
Lighting rasoterra
LED at floor level for path signaling and atmosphere.
Lighting Reality
LED lighting calculation software for street lighting.
Lighting recessed
Installation of LED profiles or fixtures integrated flush with the surface (ceiling, wall, floor).
Lighting recessed in the drywall
LED profile integrated into the suspended drywall ceiling.
Lighting recessed in the floor
LED in the walking surface with walkable profiles.
Lighting recessed in the metal
LED profile integrated into a housing in the metal.
Lighting recessed in the wood
LED profile integrated into a milling in the wood.
Lighting recessed linear
Linear LED profile recessed into the ceiling or wall.
Lighting regulation
Local or national regulations on LED lighting.
Lighting research
Scientific research on LED lighting and its effects.
Lighting retrofit
Complete replacement of the existing lighting system with LED.
Lighting room hotel
LED for hotel rooms; customizable scenes and dimming.
Lighting room operatoria
Very-high-CRI surgical LED; not related to strips.
Lighting sagrestia
LED for sacristies; warm CCT and respect for the environment.
Lighting sala attesa
LED for waiting rooms; comfort and relaxing atmosphere.
Lighting sala biliardo
LED for billiard rooms; high uniformity on the table.
Lighting sala bowling
LED for bowling alleys; effects and atmosphere.
Lighting sala colazione
LED for hotel breakfast rooms; warm CCT and dimmable.
Lighting sala degustazione
LED for wine tasting rooms; warm CCT and high CRI.
Lighting sala fitness
LED for fitness rooms; high uniformity and anti-stroboscopic.
Lighting sala giochi
LED for game rooms; colorful effects and dimming.
Lighting sala mensa
LED for canteens; uniformity and comfort.
Lighting sala mostre
LED for exhibition halls; CRI>95 and UV protection.
Lighting sala of appearance
LED for conference rooms; comfort and efficiency.
Lighting sala parto
LED for delivery rooms; dimmable and CCT adjustable.
Lighting sala prove
LED for rehearsal rooms; uniform and dimmable.
Lighting sala relax
LED for relaxation rooms; soft scenes and chromotherapy.
Lighting sala riunioni large
LED for large meeting rooms; zoning and scenes.
Lighting sala server
LED for server rooms; efficient and low thermal load.
Lighting sala studio
LED for music studios; uniform and flicker-free.
Lighting sala yoga
LED for yoga rooms; warm CCT, dimmable, and chromotherapy.
Lighting salone bellezza
LED for beauty salons; high CRI and illuminated mirrors.
Lighting scantinato
LED for basements; resistant to humidity and efficient.
Lighting scene controller
Controller dedicated to the management of predefined lighting scenes.
Lighting scenografica
Use of colored and dynamic LED light to create atmospheres and visual effects in events or commercial spaces.
Lighting schedule
Time programming of LED lighting for automation.
Lighting segnapasso
Low-brightness LED along corridors and stairs for nighttime orientation.
Lighting serra
LED grow light for greenhouses; spectrum optimized for plants.
Lighting shop optics
LED for optician's shops; high CRI and absence of reflections.
Lighting simulation
Computerized simulation of the light distribution.
Lighting simulation report
Report of the lighting simulation with results and recommendations.
Lighting specification
Technical specification of the LED lighting for the tender.
Lighting spogliatoio
LED for changing rooms; IP44 and high uniformity.
Lighting standard compliance
Compliance of the LED system with current lighting standards.
Lighting stratificata
LED design on multiple levels: ambient, task, accent for a complete environment.
Lighting subacquea
IP68 LED for swimming pools, fountains, and decorative basins.
Lighting surface-mounted linear
Linear LED profile applied directly to the surface.
Lighting survey
Field survey with measurements of lux and distribution.
Lighting suspended
LED profiles suspended via cables or rods from the ceiling; create both direct and indirect light.
Lighting suspended linear
Linear LED profile suspended from the ceiling with cables.
Lighting system integration
Integration of the LED system with other building systems.
Lighting technique
LED for technical environments: laboratories, server rooms, electrical panels.
Lighting technology comparison
Comparison between LED and other technologies: fluorescent, halogen, HID.
Lighting temporary
LED for temporary installations: events, construction sites, exhibitions.
Lighting tender
Tender for the supply and installation of LED lighting.
Lighting terapeutica
LED with specific spectrum for therapeutic and wellness applications.
Lighting test laboratory
Accredited laboratory for photometric and safety tests on LEDs.
Lighting tettoia
LED for canopies and shelters; IP65 and sensors.
Lighting to beam wide
LED strip with a wide emission angle for uniform distribution.
Lighting to day LED
LED lighting simulating daylight conditions.
Lighting to double emission
LED profile emitting both downwards and upwards.
Lighting to effect
LED strip used to create decorative and scenic effects.
Lighting to LED costi
Cost analysis of LED lighting: purchase, installation, operation.
Lighting to LED saving
Energy savings obtained with LED lighting: 50-80% compared to traditional.
Lighting to led advantages
Advantages of LED lighting: efficiency, duration, light quality, dimmability.
Lighting to LED advantages and svantaggi
Comparison between advantages (efficiency, duration) and limits (initial cost) of LED technology.
Lighting to low impact LED
LED system designed to minimize environmental impact.
Lighting to saving LED
LED system optimized for maximum energy savings.
Lighting to standard of legge LED
LED system compliant with all current regulations.
Lighting to terra LED
In-ground LED fixtures for pathway and garden lighting.
Lighting to track
LED system on electrified track for adjustable spotlights; used in retail and galleries.
Lighting track
See Track electrified. Rail system for LED spotlights.
Lighting under shelf
Strip under shelves for functional and decorative light.
Lighting under-cabinet
Strip under kitchen cabinets for the work surface.
Lighting uniform
LED with distribution ensuring uniformity over the entire surface.
Lighting uniformity standard
Regulatory requirement for LED lighting uniformity.
Lighting vasca idromassaggio
IP68 LED for hot tubs; chromotherapy.
Lighting vertical
LED illuminating vertical surfaces: walls, columns, facades.
Lighting viale alberato
LED for tree-lined avenues; respect for the landscape.
Lighting vivaio
LED grow lights for nurseries; spectrum for plants and efficiency.
Lighting warehouse frigorifero
LED for cold storage warehouses; operation at low temperatures.
Lighting with sensori
LED system with sensors for automatic control of switching on and dimming.
Lighting zero flicker
LED with a power supply ensuring total absence of flicker.
Lighting zone plan
Zoning plan of LED lighting in a project.
Lima for aluminum
File for finishing the cut edges of the LED profile.
Limit of power strip
Maximum power allowed per meter from the LED strip without overheating.
Line luminous ceiling-mounted
LED profile on the ceiling creating a continuous line of light.
Line luminous wall-mounted
LED profile on the wall creating a horizontal or vertical line of light.
Line of fuga LED
Luminous LED line disappearing at the horizon for a perspective effect.
Line of LED light
Continuous linear lighting effect achieved with profiles and LED strips.
Line voltage
Mains voltage (230V AC in Europe); to be converted for the LED strip.
Linear fixture
Linear-shaped LED fixture for continuous lighting.
Linear lighting system
Complete system of profiles, strips, and accessories for linear light.
Linkable fixture
LED fixture connectable in series with others to create continuous lines.
Listino accessories LED
Prices of accessories for LED profiles: clips, end caps, connectors.
Listino aggiornato LED
Current prices of the manufacturer's LED products.
Listino LED controller
Prices of LED controllers available in the catalog.
Listino LED power supplies
Prices of LED power supplies available in the catalog.
Listino LED profiles
Prices of aluminum LED profiles per linear meter.
Listino LED strip
Prices of LED strips per linear meter.
Listino prezzi LED
List of prices of the manufacturer's or distributor's LED products.
Litestar 4D
Lighting calculation software for LED design.
Live wire
Phase conductor of the electrical network; connected to the input of the LED power supply.
Livella laser to croce
Laser level projecting two cross lines for precise alignment of LED profiles.
Livella to bolla
Spirit level for verifying the horizontality of the LED profile during mounting.
LM-79
IES standard for measuring the photometric and colorimetric performance of complete LED fixtures.
LM-80
IES standard for measuring the luminous decay of the LED package over time.
Load balancing
Balanced distribution of the LED load between multiple power supplies.
Load calculation
Calculation of total power for sizing power supplies and LED cables.
Load LED
Total power absorbed by the strips connected to a power supply.
Load maximum
Maximum power (in Watts) that a power supply or controller can handle before overloading.
Load maximum LED power supply
Maximum power in Watts that the LED power supply can deliver.
Load minimum (dimmer)
Minimum power required for the correct operation of an LED dimmer.
Load nominal power supply
Nominal power declared by the LED power supply.
Load resistivo
Purely resistive load; LEDs approach a load with a capacitive component.
Lobby application
LED lighting for halls and reception areas; suspended profiles and welcome scenarios.
Local control
Control of LED lighting via local switches and dimmers.
Locking connector
Connector with mechanical lock to prevent accidental disconnections.
Loft LED
LED lighting for lofts and open spaces; suspended profiles and scenes.
Loggia LED
LED lighting for loggias and covered terraces.
Logistica LED
Management of the distribution chain of LED products.
Logistics application
LEDs for logistics centers and warehouses; high-bay fixtures and automation.
Long throw
Narrow LED beam for illuminating objects at a great distance.
Looping
Ring connection returning to the starting point; for redundancy.
LOR (Light Output Ratio)
Ratio between luminous flux emitted by the fixture and flux emitted by the LED source alone.
Loss in the diffuser
Reduction of luminous flux through the diffuser; opal ~30%.
Loss in the driver
Power dissipated as heat by the LED power supply; efficiency loss.
Loss of efficiency LED
Reduction of the efficiency of the LED system due to temperature or aging.
Lossless dimming
Dimming without chromatic distortion; the shade remains constant.
Lotto of production LED
Quantity of LED products manufactured in the same production session.
Louver (grid)
Anti-glare optical grid applied in front of the LED source.
Low Bay LED
LED fixture for low-medium ceilings (3-6 m).
Low glare
Characteristic of an LED fixture with a low UGR glare index.
Low power (strip)
Strip with power less than or equal to 4.8 W/m; decorative and pathway.
Low profile
LED profile with very low height for ultra-flat installations.
Low ripple
Power supply with minimum residual ripple for absence of flicker.
Low temperature adhesive
Special double-sided tape for LED strips in cold environments (<0°C).
Low voltage
Voltage less than or equal to 50V AC or 120V DC; standard for LED strips.
Low voltage cable
Low voltage cable suitable for connecting LED strips.
Low voltage disconnect
Protection disconnecting the LED load when the voltage drops too low.
Loxone
Austrian home automation system with native LED integration.
LPD (Lighting Power Density)
LED power per square meter; regulatory efficiency indicator.
LSZH (material)
Low Smoke Zero Halogen material for LED cable sheaths in public buildings.
Lumen (lm)
Unit of measurement of the total luminous flux emitted from an LED source.
Lumen depreciation
See "Decay luminous". Reduction of flux over time due to LED aging.
Lumen efficacy
See Luminous efficacy. Ratio lm/W.
Lumen for metro 1000
LED strip with a flux of 1000 lm/m; for general lighting.
Lumen for metro 1500
LED strip with a flux of 1500 lm/m; for task lighting.
Lumen for metro 2000
LED strip with a flux of 2000 lm/m; for high-power lighting.
Lumen for metro 3000
LED strip with a flux of 3000 lm/m; for primary lighting.
Lumen for metro 4000
LED strip with a flux of 4000 lm/m; for very-high-power lighting.
Lumen for metro 500
LED strip with a flux of 500 lm/m; for decorative lighting.
Lumen for watt
See Luminous efficacy.
Lumen maintenance
Percentage of the initial luminous flux maintained after a certain number of operating hours.
Lumen output
Total luminous flux emitted; in lumens.
Lumen total LED system
Sum of the luminous flux of all the LEDs in the system.
Lumen/metro (lm/m)
Luminous flux emitted per linear meter of LED strip; key parameter for sizing.
Lumens chip
LED chip from the manufacturer Lumens for high-efficiency strips.
Lumileds Luxeon
Family of Luxeon LED chips from Lumileds for professional lighting.
Luminaire
International term for a complete lighting fixture.
Luminance (cd/m²)
Luminous intensity per unit of surface perceived by the eye; determines the sensation of brilliance.
Luminance contrast
Difference in luminance between two adjacent areas.
Luminance maximum
Highest luminance on the surface of the LED diffuser; for UGR calculation.
Luminance meter
Instrument for measuring luminance in cd/m2.
Luminance of threshold
Minimum luminance perceivable by the eye; for LED sizing.
Luminance uniform
Uniform distribution of luminance over the entire luminous surface; objective of quality diffusers.
Luminous area
Visible emitting surface of an LED fixture.
Luminous ceiling
Luminous ceiling made with LED panels or diffused strips.
Luminous efficacy (lm/W)
Ratio between luminous flux emitted and electrical power absorbed; key parameter for energy efficiency.
Luminous efficacy of the radiation
Ratio between luminous flux and radiant power of the LED; in lm/W.
Luminous exitance
Luminous flux emitted per unit area of a surface.
Luminous flux
See Luminous flux. Total quantity of light in lumens.
Luminous flux (lumen, lm)
Total quantity of light emitted from an LED source in all directions; unit of measurement: lumen.
Luminous flux declared strip
Flux in lumens per meter declared by the LED strip manufacturer.
Luminous flux for metro
Lumens emitted by the LED strip per linear meter; fundamental parameter.
Luminous flux iniziale
Flux measured after 100 hours of operation; reference LED value.
Luminous flux mantenuto
LED flux at the end of useful lifetime; parameter for lighting calculation.
Luminous flux measured strip
Flux in lumens per meter measured in the laboratory on the LED strip.
Luminous flux total system
Sum of the flux of all the LED fixtures in the system.
Luminous intensity
See Luminous intensity. Flux per solid angle in candelas.
Luminous intensity (candela, cd)
Luminous flux emitted per unit of solid angle in a specific direction; unit: candela.
Luminous intensity assiale
LED intensity measured on the optical axis; the maximum value.
Luminous intensity media
Average LED intensity in all directions; for calculating total flux.
Lux (lx)
Unit of measurement of illuminance; 1 lux = 1 lumen per square meter.
Luxmetro
Portable measuring instrument for detecting the illuminance level (lux) of a surface. ↑ Back to top
M
M12 connectorWaterproof circular industrial connector for LED systems.
M3/M4/M5 screw
Metric screws of various diameters for fixing LED profiles.
M8/M10 bolt
Metric bolts for mounting LED brackets and supports.
MacAdam (ellisse di)
Area in the CIE diagram defining the perceivable chromatic tolerance; steps 1-3 indicate excellent uniformity.
MacAdam step 1
Imperceptible chromatic variation between LEDs; maximum quality.
MacAdam step 2
Minimal chromatic variation; excellent for professional LED strips.
MacAdam step 3
Barely perceptible chromatic variation; good for LED strips.
MacAdam step 5
Perceptible chromatic variation; acceptable for decorative LEDs.
Machine room LED
LED lighting for machine rooms and technical areas.
Machine vision LED
Specific LED lighting for machine vision systems.
Macro lens
Magnifying lens used for inspecting LED chips.
Made in Europe LED
LED products manufactured in Europe with high quality standards.
Made in Italy profilo LED
Aluminum LED profile manufactured in Italy.
Madrix
Software for controlling addressable LED strips and LED matrices.
Magazzino prodotti LED
Storage warehouse for LED components for distribution.
Magnetic ballast
Traditional electromagnetic ballast; replaced by LED drivers.
Magnetic base LED
Portable LED lamp with magnetic base for attachment to metal surfaces.
Magnetic clip
Magnetic clip for quick fixing of the LED profile on metal surfaces.
Magnetic connector
Magnetic connector for quick and secure connection of LED strips.
Magnetic diffuser
Diffuser retained by magnets for easy removal and maintenance.
Magnetic door contact
Magnetic door contact for activating LED lighting.
Magnetic driver mount
Magnetic mounting of the LED driver for easy replacement.
Magnetic fastener
Magnetic fixing for LED profiles on metal surfaces.
Magnetic mount profile
LED profile with magnetic mounting for quick installation on metal.
Magnetic mounting
Fixing via magnets of LED strips and profiles on metal surfaces.
Magnetic reed switch
Magnetic reed switch for activating LEDs in furniture.
Magnetic strip mount
Mounting of the LED strip via a magnetic strip on the back.
Magnetic track
Magnetic track for LED spotlights with quick mounting.
Magneto-resistive sensor
Magneto-resistive sensor for position detection in LED systems.
Magnetotermico
Automatic circuit breaker; must be sized considering the inrush current of LED power supplies.
Main breaker
Main circuit breaker of the electrical panel for the LED installation.
Main distribution board
Main electrical panel with protections for LED circuits.
Main driver
Main power supply of an LED installation with multiple drivers.
Main feeder cable
Main power cable from the mains input to the LED installation.
Main switch
Main switch of the LED installation in the electrical panel.
Maintained emergency
Emergency LED fixture always on, even in normal conditions.
Maintenance access panel
Removable panel for access to LED power supplies in the suspended ceiling.
Maintenance checklist
Checklist for periodic maintenance of the LED installation.
Maintenance contract
Contract for periodic maintenance of the LED installation.
Maintenance cost
Cost of maintenance of the LED installation over its life cycle.
Maintenance cycle
Programmed maintenance cycle of the LED installation.
Maintenance diagram
Diagram of maintenance operations for the LED installation.
Maintenance factor
See Maintenance factor. Coefficient for lighting calculation.
Maintenance free
LED system designed to require no maintenance during its useful life.
Maintenance interval
Interval between maintenance interventions on the LED installation.
Maintenance log
Log of maintenance operations performed on the LED installation.
Maintenance plan
Planned maintenance program for the LED installation.
Maintenance procedure
Operating procedure for maintaining the LED installation.
Maintenance record
Historical documentation of the LED installation maintenance.
Maintenance report
Report on the status of the LED installation after maintenance.
Maintenance schedule
Schedule of periodic maintenance of the LED installation.
Maintenance tool kit
Tool kit for maintaining the LED installation.
Maintenance training
Training of personnel for the maintenance of the LED installation.
Mall LED installation
LED installation for shopping centers with linear profiles and scenes.
Mall lighting
LED lighting for shopping centers; high uniformity and CRI.
Mandrel bending
Mandrel bending of LED profiles for precise curves.
Mansarda LED
LED lighting for attics; slim profiles for sloping ceilings.
Manual control panel
Manual control panel with switches and dimmers for LEDs.
Manual dimmer
Dimmer with manual adjustment via knob, slider, or button.
Manual dimming
Manual adjustment of LED brightness via a physical dimmer.
Manual operation
Manual operation of the LED installation without automation.
Manual override
Manual command overriding the automatic LED control.
Manual switch
Manual switch for turning LEDs on and off.
Manuale di installazione LED
Document with complete instructions for mounting the LED system.
Manuale di uso LED
Document for the end user with instructions for using the LED installation.
Manuale tecnico profilo LED
Document with specifications and installation instructions for the LED profile.
Manuale tecnico strip LED
Document with specifications and application instructions for the LED strip.
Manufacturer code
Manufacturer's code printed on LED strips and power supplies.
Manufacturing date code
Date code printed on the LED strip for traceability.
Manufacturing defect
Manufacturing defect of the LED strip detected during quality control.
Manufacturing lot
Production lot of LED strips with uniform characteristics.
Manufacturing process
Manufacturing process of LED strips: SMT, soldering, testing, packaging.
Manufacturing tolerance
Dimensional and electrical tolerances in the production of LED strips.
Manutenibilità dell'impianto LED
Ease of access and replacement of LED components.
Manutenzione correttiva LED
Intervention to repair faults in the LED installation.
Manutenzione del diffusore
Periodic cleaning of the LED diffuser to maintain luminous flux.
Manutenzione del profilo LED
Periodic inspection and cleaning of the aluminum LED profile.
Manutenzione dell'impianto LED
Periodic operations to maintain the performance of the LED installation.
Manutenzione della strip LED
Replacement of the LED strip in the profile for upgrade or end of life.
Manutenzione ordinaria
Periodic operations of cleaning diffusers and checking connections to maintain the efficiency of the LED installation.
Manutenzione preventiva LED
Programmed interventions to prevent faults in the LED installation.
Manutenzione programmata LED
Periodic planned interventions to maintain the LED installation.
Map display LED
LED display for visualizing maps and floor plans.
Maple finish profile
LED profile with maple wood effect finish for integration with wooden furnishings.
Mappa colore
Graphic representation of the color distribution on a surface illuminated by LEDs.
Mappa colori RGB
Visual representation of all colors producible by the RGB LED strip.
Mappa di illuminamento
Graphic representation of the LED illuminance level on the surface.
Mappa di luminanza
Graphic representation of the perceived luminance in the LED-lit environment.
Mappa termica
Color image of the temperature distribution on the LED profile and strip.
Marble effect LED
LED profile with marble effect finish for classic environments.
Marca del profilo LED
Manufacturer of the aluminum LED profile.
Marca dell'alimentatore LED
Manufacturer of the LED power supply; Mean Well is the leader.
Marca della strip LED
Manufacturer of the LED strip; influences quality and reliability.
Marca di qualità LED
LED manufacturer recognized for reliability and performance.
Margin of safety
Safety margin in sizing the LED power supply: typically 20%.
Margine di contribuzione LED
Difference between revenue and variable cost in the sale of LED products.
Margine di potenza alimentatore
Excess power of the power supply over the LED load; typically 20%.
Marine connector
Marine-use connector resistant to salt corrosion for LEDs.
Marine environment
Aggressive marine environment requiring salt-resistant LED materials.
Marine grade
Marine-grade LED component; resistant to salt corrosion.
Marine grade cable
Corrosion-resistant cable for coastal LED installations.
Marine grade connector
Waterproof and corrosion-resistant connector for marine LEDs.
Marine grade profile
LED profile in marine aluminum or stainless steel for coastal environments.
Marine LED fixture
Certified LED fixture for naval and coastal use.
Marker light LED
LED signaling light to indicate position or path.
Marketing prodotti LED
Promotional activities for the commercialization of LED products.
Marking (strip)
Markings and symbols printed on the LED strip: cut point, polarity, product code.
Mast LED
LED lighting mounted on a pole for outdoor lighting.
Mast mount bracket
Bracket for mounting LED fixtures on poles.
Master clock
Central clock synchronizing the time programming of the LED installation.
Master controller
Main LED controller coordinating slaves and amplifiers.
Master dimmer
Main dimmer controlling all other LED dimmers in the installation.
Master switch
Main switch turning on/off the entire LED installation.
Master-slave
Configuration where a master controller synchronizes one or more slave amplifiers for extended LED strips.
Material certificate
Certificate of materials used in the production of LED profiles.
Material compliance
Conformity of LED product materials to regulations (RoHS, REACH).
Material data sheet
Technical data sheet of the LED profile and diffuser materials.
Material safety
Safety of LED product materials; absence of harmful substances.
Material safety data sheet (MSDS)
Safety data sheet for materials used in LED products.
Materiale del diffusore LED
Type of cover material: PMMA, polycarbonate, silicone, glass.
Materiale del profilo LED
Type of aluminum of the profile: 6063, 6060, 6005A.
Materiale del tappo profilo
Type of material for the end cap: aluminum, plastic, silicone.
Materiale della clip LED
Type of clip material: steel, aluminum, plastic.
Materiale della strip LED
Components of the strip: FPCB substrate, copper, LEDs, resistors, phosphor.
Materiale di fissaggio LED
Screws, clips, and anchors for mounting the LED system.
Matita da falegname
Carpenter's pencil for marking fixing points of the LED profile on wood.
Matrice di compatibilità LED
Table indicating compatibility between LED strips, profiles, drivers, and controllers.
Matrice di Mueller
Matrix for describing the polarization of LED light.
Matrice LED
Arrangement of LEDs in rows and columns to create programmable displays or panels.
Matte black profile
LED profile with matte black finish for a discreet and modern design.
Matte finish
Matte finish of the LED profile; reduces reflections and fingerprints.
Matte white profile
LED profile with matte white finish for integration with light ceilings.
Matter (protocollo)
Smart home interoperability standard unifying Wi-Fi, Thread, and Bluetooth.
Max ambient temperature
Maximum ambient temperature for correct operation of the LED system.
Max cable length
Maximum cable length between power supply and strip without excessive drop.
Max cable run
Maximum cable length between power supply and LED strip without problems.
Max continuous load
Maximum continuous load supported by the LED power supply.
Max current per channel
Maximum current per channel of the LED controller.
Max dimming level
Maximum dimming level; typically 100%.
Max junction temperature
Maximum junction temperature of the LED; absolute limit of the chip.
Max load
Maximum load supported by an LED power supply or controller.
Max load per channel
Maximum power per channel of the LED controller.
Max operating temperature
Maximum operating temperature of the LED system.
Max power consumption
Maximum consumption of the LED installation at full brightness.
Max run length
Maximum length of LED strip connectable in a single run.
Max strip length
Maximum length of LED strip connectable without problems.
Maximum span
Maximum free span of a suspended LED profile without intermediate supports.
MCB (miniature circuit breaker)
Miniature automatic circuit breaker for LED circuits.
mcd (millicandela)
Submultiple of the candela (1/1000 cd); used to specify the luminous intensity of individual SMD LEDs.
MCPCB (Metal Core PCB)
PCB with metal core for superior thermal dissipation.
MCPCB assembly
Assembly of components on metal-core PCB for LEDs.
MCPCB design
Design of PCB with metal core for LED dissipation.
MCPCB thermal performance
Thermal performance of the metal-core PCB for LEDs.
Mean beam angle
Average beam angle of the LED measured at 50% of peak intensity.
Mean beam candlepower (MBCP)
Average luminous intensity at the center of the beam of an LED fixture.
Mean color rendering
Average color rendering of an LED fixture; see CRI.
Mean illuminance
Average illuminance on the target surface of the LED installation.
Mean lumens
Average luminous flux during the useful life of the LED.
Mean luminance
Average luminance of the LED diffuser surface.
Mean Time Between Failures (MTBF)
Mean time between failures; reliability indicator of LED power supplies.
Mean Well
Leading manufacturer of switching power supplies for LEDs; series HLG, ELG, LPV, NPF among the most widespread.
Mean Well APV series
Mean Well APV series at constant voltage for indoor LEDs.
Mean Well CEN series
Mean Well CEN series dimmable for LED street lighting.
Mean Well CLG series
Mean Well CLG series at constant current for outdoor LEDs.
Mean Well ELG-100
Mean Well ELG power supply from 100W for outdoor LEDs.
Mean Well ELG-150
Mean Well ELG power supply from 150W for outdoor LEDs.
Mean Well ELG-200
Mean Well ELG power supply from 200W for outdoor LEDs.
Mean Well ELG-240
Mean Well ELG power supply from 240W for outdoor LEDs.
Mean Well ELG-300
Mean Well ELG power supply from 300W for outdoor LEDs.
Mean Well ELG-75
Mean Well ELG power supply from 75W for outdoor LEDs.
Mean Well ELN series
Mean Well ELN series dimmable for compact outdoor LEDs.
Mean Well GST series
Mean Well GST series desktop with plug for bench LEDs.
Mean Well HBG series
Mean Well HBG series for industrial high-bay LED luminaires.
Mean Well HDR-100
Mean Well HDR power supply from 100W on DIN rail for LEDs.
Mean Well HDR-15
Mean Well HDR power supply from 15W on DIN rail for LEDs.
Mean Well HDR-150
Mean Well HDR power supply from 150W on DIN rail for LEDs.
Mean Well HDR-30
Mean Well HDR power supply from 30W on DIN rail for LEDs.
Mean Well HDR-60
Mean Well HDR power supply from 60W on DIN rail for LEDs.
Mean Well HEP series
Mean Well HEP series for harsh environments with advanced protection.
Mean Well HLG-100
Mean Well HLG power supply from 100W for professional LEDs.
Mean Well HLG-120
Mean Well HLG power supply from 120W for professional LEDs.
Mean Well HLG-150
Mean Well HLG power supply from 150W for professional LEDs.
Mean Well HLG-185
Mean Well HLG power supply from 185W for professional LEDs.
Mean Well HLG-240
Mean Well HLG power supply from 240W for professional LEDs.
Mean Well HLG-320
Mean Well HLG power supply from 320W for professional LEDs.
Mean Well HLG-40
Mean Well HLG power supply from 40W for professional LEDs.
Mean Well HLG-480
Mean Well HLG power supply from 480W for professional LEDs.
Mean Well HLG-60
Mean Well HLG power supply from 60W for professional LEDs.
Mean Well HLG-600
Mean Well HLG power supply from 600W for professional LEDs.
Mean Well HLG-80
Mean Well HLG power supply from 80W for professional LEDs.
Mean Well HSP series
Mean Well HSP series high power with PFC for LEDs.
Mean Well IDLC series
Mean Well IDLC series at constant current dimmable for LEDs.
Mean Well IDLV series
Mean Well IDLV series at constant voltage dimmable for LED strips.
Mean Well IRM series
Mean Well IRM series miniaturized and encapsulated for LEDs.
Mean Well LDH series
Mean Well LDH series DC-DC step-up converter for LEDs.
Mean Well LED driver selector
Mean Well online tool for selecting the appropriate LED driver.
Mean Well LPH series
Mean Well LPH series compact constant current for LEDs.
Mean Well LPV-100
Mean Well LPV power supply from 100W economical IP67.
Mean Well LPV-150
Mean Well LPV power supply from 150W economical IP67.
Mean Well LPV-20
Mean Well LPV power supply from 20W economical IP67.
Mean Well LPV-35
Mean Well LPV power supply from 35W economical IP67.
Mean Well LPV-60
Mean Well LPV power supply from 60W economical IP67.
Mean Well LRS-100
Mean Well LRS power supply from 100W enclosed for indoor LEDs.
Mean Well LRS-150
Mean Well LRS power supply from 150W enclosed for indoor LEDs.
Mean Well LRS-200
Mean Well LRS power supply from 200W enclosed for indoor LEDs.
Mean Well LRS-350
Mean Well LRS power supply from 350W enclosed for indoor LEDs.
Mean Well LRS-50
Mean Well LRS power supply from 50W enclosed for indoor LEDs.
Mean Well NES series
Mean Well NES series enclosed economical for LEDs.
Mean Well NPF-120
Mean Well NPF power supply from 120W slim for LEDs.
Mean Well NPF-200
Mean Well NPF power supply from 200W slim for LEDs.
Mean Well NPF-40
Mean Well NPF power supply from 40W slim for LEDs.
Mean Well NPF-60
Mean Well NPF power supply from 60W slim for LEDs.
Mean Well NPF-90
Mean Well NPF power supply from 90W slim for LEDs.
Mean Well OWA series
Mean Well OWA series with wall adapter for LEDs.
Mean Well PLP series
Mean Well PLP series programmable constant current for LEDs.
Mean Well PSD series
Mean Well PSD series DC-DC converter for LEDs.
Mean Well PWM series
Mean Well PWM series with PWM output for LED strips.
Mean Well RPS series
Mean Well RPS series for medical LED applications.
Mean Well RSP series
Mean Well RSP series enclosed with PFC high power.
Mean Well SDR series
Mean Well SDR series DIN rail with PFC for industrial LEDs.
Mean Well selector tool
Online selection tool for Mean Well drivers for LEDs.
Mean Well UHP-1000
Mean Well UHP power supply from 1000W ultra-high efficiency for LEDs.
Mean Well UHP-1500
Mean Well UHP power supply from 1500W ultra-high efficiency for LEDs.
Mean Well UHP-200
Mean Well UHP power supply from 200W ultra-high efficiency for LEDs.
Mean Well UHP-350
Mean Well UHP power supply from 350W ultra-high efficiency for LEDs.
Mean Well UHP-500
Mean Well UHP power supply from 500W ultra-high efficiency for LEDs.
Mean Well UHP-750
Mean Well UHP power supply from 750W ultra-high efficiency for LEDs.
Mean Well warranty
Warranty of Mean Well products for professional LED applications.
Mean Well XLG series
Mean Well XLG series at constant current with wide range for outdoor LEDs.
Mean Well XLG-100
Mean Well XLG power supply from 100W at constant current for LEDs.
Mean Well XLG-150
Mean Well XLG power supply from 150W at constant current for LEDs.
Mean Well XLG-200
Mean Well XLG power supply from 200W at constant current for LEDs.
Mean Well XLG-240
Mean Well XLG power supply from 240W at constant current for LEDs.
Mean Well XLG-25
Mean Well XLG power supply from 25W at constant current for LEDs.
Mean Well XLG-320
Mean Well XLG power supply from 320W at constant current for LEDs.
Mean Well XLG-50
Mean Well XLG power supply from 50W at constant current for LEDs.
Mean Well XLG-75
Mean Well XLG power supply from 75W at constant current for LEDs.
Measurement accuracy
Accuracy of photometric and colorimetric LED measurements.
Measurement instrument
Measuring instrument for LED parameters: luxmeter, spectrometer, thermal camera.
Measurement point
Specific point where LED illuminance is measured.
Measurement protocol
Standardized protocol for measuring LED performance.
Measurement report
Report of measurements performed on the installed LED installation.
Measurement uncertainty
Uncertainty of LED photometric measurements.
Measuring tape
Measuring tape for measuring lengths in LED installation.
Meccanica quantistica
Physical theory underlying the operation of the LED chip.
Mechanical assembly
Mechanical assembly of the LED profile components.
Mechanical connection
Mechanical connection between the LED profile and the mounting surface.
Mechanical coupling
Mechanical coupling between two sections of LED profile.
Mechanical design
Mechanical design of the LED profile and accessories.
Mechanical drawing
Mechanical drawing of the LED profile with dimensions and tolerances.
Mechanical fixing
Fixing of the LED profile via mechanical means (screws, clips, rivets).
Mechanical interlock
Mechanical lock preventing opening during operation.
Mechanical load
Mechanical load on the LED profile: weight, wind, snow, vibrations.
Mechanical protection
Mechanical protection of the LED strip via profile and diffuser.
Mechanical seal
Mechanical seal of the LED profile for IP protection.
Mechanical specification
Mechanical specifications of the LED profile: dimensions, weight, material.
Mechanical strength
Mechanical strength of the LED profile to loads and stresses.
Mechanical stress
Mechanical stress on the LED profile due to mounting, vibrations, or loads.
Mechanical tolerance
Dimensional tolerances of the extruded aluminum LED profile.
Media facade
Multimedia facade with integrated LEDs for video and graphic content.
Media server LED
Media server generating video content for LED matrices.
Medical grade cable
Cable with medical-grade insulation for LED fixtures in healthcare settings.
Medical lighting
LED lighting for healthcare environments; high CRI and specific standards.
Medical lighting standard
Lighting standard for healthcare environments with LEDs.
Medium density strip
LED strip with 60-120 LED/m; for general lighting.
Medium power LED
Mid-power LED (0.2-0.5W); the most common type in strips.
Meeting room LED
LED lighting for meeting rooms; multiple scenes and dimmable control.
Melanopic equivalent daylight illuminance (MEDI)
Metric for evaluating the circadian effect of LED light.
Melanopico (fattore)
Ratio measuring the effectiveness of LED light in stimulating circadian receptors (ipRGC ganglion cells).
Membrane switch
Membrane switch for controlling LED systems.
Memory backup
Battery or capacitor maintaining the settings of the LED controller.
Memory chip
Memory chip in the LED controller for saving scenes and effects.
Memory function
Capability of the LED controller to memorize the last state before shutdown.
Memory recall
Recall of settings stored by the LED controller.
Memory reset
Reset of the LED controller memory to factory settings.
Mensa LED
LED lighting for canteens and refectories; uniformity and comfort.
Menu display LED
LED display for menu visualization in restaurants and bars.
Mercato dell'illuminazione LED
Commercial sector of LED products at national and international levels.
Mercury content
Mercury content; LEDs are free of it unlike fluorescents.
Mercury lamp replacement
Replacement of mercury vapor lamps with LEDs.
Mercury-free
Absence of mercury; advantage of LEDs over fluorescent lamps.
Mercury-free declaration
Declaration of the absence of mercury in LED products.
Mesh (rete a maglia)
Wireless mesh network topology where each node can communicate with others; used in Zigbee and Bluetooth Mesh for LEDs.
Mesh control system
LED control system based on a wireless mesh network.
Mesh gateway
Gateway for Zigbee or Bluetooth mesh networks for LED control.
Mesh network configuration
Configuration of the mesh network for distributed LED control.
Mesh network range
Range of the mesh network for wireless LED control.
Mesh topology
Mesh network topology for communication between LED devices.
Mesopico (visione)
Vision in intermediate light conditions; transition between photopic and scotopic.
Messa in opera LED
Physical installation of the LED installation on site.
Messa in servizio LED
Startup and configuration of the LED installation after installation.
Metal bracket
Metal bracket for fixing LED profiles and fixtures.
Metal channel
Metal channel for housing the LED strip.
Metal clip
Metal clip for fixing the LED profile.
Metal conduit
Metal tube for protecting LED cables.
Metal core PCB (MCPCB)
PCB with metal core for maximum thermal dissipation.
Metal finish
Metallic finish of the LED profile: chrome, nickel, brass.
Metal halide LED replacement
Replacement of metal halide lamps with LEDs.
Metal halide replacement
Replacement of metal halide lamps with LEDs.
Metal housing
Metal enclosure of the LED power supply or fixture.
Metal oxide varistor (MOV)
Metal oxide varistor for surge protection of the LED driver.
Metal stamping
Metal stamping for the production of LED brackets and clips.
Metallic tape
Metallic adhesive tape for supplementary thermal dissipation of the LED strip.
Metamerism index
Index quantifying the metamerism between two LED sources.
Metamerismo
Two colors appear the same under one source and different under another.
Meter box
Meter box; starting point of the power supply for LED installations.
Metering device
Device for measuring the energy consumption of the LED installation.
Metering point
Measurement point of the energy consumed by the LED installation.
Metro a nastro digitale
Digital tape measure for precise measurements in LED installation.
Metro di strip LED necessario
Quantity of LED strip in linear meters required by the project.
Metro laser
Laser distance meter for sizing the LED installation.
Metro lineare di strip
Unit of measurement for ordering LED strips; price expressed per meter.
Metro lineare profilo LED
Unit of measurement for ordering LED profiles; price per meter.
Metro lineare strip LED
Unit of measurement for ordering LED strips; price per meter.
Metrology (LED)
Science of measurement applied to photometric and colorimetric LED parameters.
Mezzo attivo
Region of the semiconductor LED where stimulated or spontaneous emission occurs.
MHz (Megahertz)
Switching frequency of LED switching drivers (typically 50-500 kHz).
Mica (isolante)
Mica thermal insulator used in high-temperature LED components.
Mica insulator
Mica insulator for thermal separation in LED fixtures.
Micro channel
Micro-channel in the substrate for liquid cooling of high-power LEDs.
Micro connector
Miniaturized connector for ultra-thin LED strips.
Micro controller unit (MCU)
Microcontroller in the LED controller for managing effects and protocols.
Micro dimmer
Miniaturized dimmer for installation in wall boxes or behind switches.
Micro driver
Miniaturized LED driver for installation in extremely small spaces.
Micro LED
Emerging technology with micrometric LEDs for ultra-compact displays and lighting.
Micro LED display
Display with micrometric LEDs for very high resolution and brightness.
Micro lens array
Matrix of micro-lenses for LED beam control on strips.
Micro lens optic
Optics with micro-lenses for precise LED beam control.
Micro motion sensor
Micro-motion sensor for activating LEDs in small spaces.
Micro prismatic diffuser
Diffuser with micro-prismatic structures for beam control and anti-glare.
Micro profile
LED profile with dimensions smaller than 10 mm for invisible installations.
Micro switch
Microswitch for activating LEDs in furniture and doors.
Micro USB connector
Micro-USB connector for configuration and power supply of LED controllers.
Microcontrollore
Programmable chip integrated into LED controllers to manage effects, protocols, and dimming logic.
Micrometer (μm)
Microscopic unit; for the dimensions of LED dies.
Microprocessor
Processor in LED controllers for managing effects and protocols.
Microwave motion detector
Microwave motion detector for LED activation.
Microwave sensor
Microwave sensor for presence detection through walls and materials.
Mid-power LED chip
Mid-power LED chip (0.2-0.5W); the most used in professional strips.
Mid-span connection
Intermediate connection along the LED strip for additional power.
Middle feed
Powering the LED strip from the center point to halve the voltage drop.
Middle point feed
Powering the LED strip from the center point to halve the voltage drop.
Midnight dimming
Automatic dimming of LEDs at midnight for energy savings.
Miglior rapporto qualità prezzo LED
LED product offering the best performance for the price.
Miglioramento del comfort LED
Optimization of the LED installation for the well-being of occupants.
Miglioramento dell'efficienza LED
Optimization of the LED installation to reduce consumption.
Miglioramento estetico LED
Upgrade of LED lighting for a more modern look.
Migration test
Test for the migration of substances from the LED material; for food applications.
Mil spec
Military specifications; compliant LED fixtures for extreme environments.
Mildew resistant
LED profile material resistant to mold formation.
Military specification LED
LED compliant with military specifications for extreme environments.
Milky diffuser
Milky white diffuser; synonymous with opal diffuser.
Milky lens
Milky lens or diffuser for uniform LED light; see Opal.
Milliamp (mA)
Thousandth of an Ampere; unit for the driving current of LEDs.
Milliwatt (mW)
Thousandth of a Watt; unit for the power of individual LEDs or indicators.
Min dimming percentage
Minimum dimming percentage achievable by the LED system.
Min load (dimmer)
Minimum load required for the stable operation of a dimmer with LEDs.
Min/max temperature
Operating temperature range of the LED system.
Mine lighting LED
LED lighting for mines and tunnels; ATEX and explosion-proof.
Mini connector
Miniaturized connector for thin LED strips and small spaces.
Mini controller
Compact LED controller for small installations.
Mini dimmer
Miniaturized dimmer for installation in small boxes.
Mini driver
Miniaturized LED power supply for extremely limited spaces.
Mini LED chip
Small-sized LED chip (100-300 micrometers) for high density.
Mini neon flex
LED neon flex with a reduced section for tight curves and details.
Mini profile
Miniaturized LED profile with width less than 10 mm.
Mini profilo
Very small LED profile (width ≤10 mm) for discreet installations in furniture or under shelves.
Mini spot LED
Small LED spotlight for point accent lighting.
Miniature circuit breaker
Compact automatic circuit breaker for LED circuits.
Miniature fuse
Miniature fuse for the protection of LED circuits.
Miniature LED
Extremely small LED; for micro-applications.
Miniature relay
Miniaturized relay for controlling LED circuits.
Minimum bend radius
Minimum bending radius of the LED strip without damaging it.
Minimum dimming level
Minimum brightness level achievable by the LED system.
Minimum load requirement
Minimum load required for the correct operation of the LED dimmer.
Minimum starting temperature
Minimum temperature at which the LED turns on correctly.
Mirror clip mount
Clip mounting of perimeter LED profiles on mirrors.
Mirror effect profile
LED profile with mirror finish for aesthetic integration.
Mirror finish aluminum
Mirror-polished aluminum for internal reflectors of LED profiles.
Mirror LED profile
LED profile specifically for perimeter lighting of mirrors.
Mirror light controller
Controller dedicated to LED lighting of bathroom mirrors.
Mirror lighting
Perimeter or rear lighting of mirrors via LED profiles.
Mirror sensor dimmer
Touch dimmer integrated into the LED profile of the mirror.
Miscelazione del colore
Process of combining LEDs of different colors (RGB/RGBW) to obtain the desired shade.
Miscelazione ottica nel profilo
Combination of light from individual LEDs in the profile for uniformity.
Miscelazione RGB nel profilo
Process of mixing R, G, B colors in the space between strip and diffuser.
Mismatch (cromatico)
Visible color difference between LED strips from different batches.
Mismatch correction
Correction of color differences between LED strips from different batches.
Mismatch loss
Efficiency loss due to differences between LEDs in the same circuit.
Missione aziendale LED
Corporate mission of the LED company to offer quality sustainable lighting.
Misura del profilo LED
Dimensions of the cross-section of the LED profile.
Misura della strip LED
Width and thickness of the LED strip for compatibility with the profile.
Miter cut
45-degree cut of the LED profile for corner joints.
Miter joint
45-degree joint between two LED profiles to form a 90-degree angle.
Miter saw
Miter saw for precise cutting of aluminum LED profiles.
Mixed beam angle
Beam with different angles combined for versatile lighting.
Mixed lighting
Combination of LED light with other sources (natural, fluorescent) in the same environment.
Mixed use lighting
LED lighting for multifunctional environments with adaptable scenes.
Mobile app control
Control of LED lighting via a smartphone application.
Mobile app dimming
Dimming of LED lighting via a smartphone application.
Mobile control
Control of LED lighting via smartphone or tablet.
Mobile lighting tower
Mobile LED lighting tower for construction sites and events.
Mock-up installation
Test installation of an LED sample to verify the effect.
Mockup
Test installation sample to evaluate the lighting effect before final production.
Modalità assenza
Presence simulation with random switching on of LEDs when away from home.
Modalità cinema LED
Preset lighting scene for movie viewing: warm and low light.
Modalità di funzionamento LED
Operating state of the LED system: on, off, dimmed, emergency.
Modalità di installazione profilo
Mounting method of the LED profile: recessed, surface, suspended.
Modalità festa LED
Preset lighting scene for parties: dynamic colors and music.
Modalità lettura LED
Preset lighting scene for reading: neutral and direct light.
Modalità notte LED
Preset lighting scene for night: minimum warm light.
Modalità relax LED
Preset lighting scene for relaxation: warm and soft light.
Modalità risveglio LED
Dawn simulation with gradual increase in brightness and CCT.
Modanatura luminosa
Architectural molding with integrated LED strip.
Modbus
Industrial protocol used in some LED control systems.
Modello 3D del profilo LED
3D CAD file of the LED profile for architectural design.
Modello BIM del profilo LED
BIM object of the LED profile for integration into the building model.
Modello del profilo LED
Product code identifying the specific type of LED profile.
Modello dell'alimentatore LED
Product code identifying the specific type of LED power supply.
Modello della strip LED
Product code identifying the specific type of LED strip.
Modular ceiling system
Modular suspended ceiling system with integration of LED profiles.
Modular connector
Standardized connector for modular LED systems.
Modular controller
LED controller with expandable modules for additional features.
Modular design
Design of LED systems with interchangeable and configurable components.
Modular driver system
Modular and configurable LED power supply system.
Modular lighting fixture
Composable LED fixture with interchangeable modules.
Modular power supply
Power supply with add-on power modules for scalability.
Modular profile system
Modular LED profile system connectable for flexible configurations.
Modular track
Modular track for configurable LED fixtures.
Modular wiring
Prefabricated modular wiring for quick installation of the LED system.
Module connector
Connector for joining modular LED components.
Module replacement
Replacement of the LED source module in the fixture for maintenance.
Modulo di alimentazione LED
Complete power supply unit for a segment of the LED installation.
Modulo di emergenza
Circuit with rechargeable battery that powers the LEDs during blackout for a defined time (1-3 hours).
Modulo di emergenza autonomo
Module with battery and circuit for autonomous LED operation in emergency.
Modulo LED
Small board with one or more LEDs and integrated optics; used for signs, backlighting, and point lighting.
Moisture barrier
Moisture barrier applied to LED strips and components.
Moisture barrier bag
Moisture barrier bag for storing LED strips.
Moisture indicator
Moisture indicator in the packaging of the LED strip.
Moisture ingress
Moisture penetration into the LED profile or fixture.
Moisture protection
Protection of LED components from moisture via IP or coatings.
Moisture resistant adhesive
Moisture-resistant adhesive for LED strips in humid environments.
Moisture seal
Sealing against moisture for protection of LED connections.
Moisture sensor
Moisture sensor for managing LED lighting in critical environments.
Mold (stampo)
Mold for the production of lenses, diffusers, and plastic components for LEDs.
Molded connector
Molded connector with integrated sheath; resistant and waterproof.
Molded end cap
Molded plastic end cap for LED profiles.
Molla di fissaggio a incasso
Spring clip for recessed fixing of LED profiles in the suspended ceiling.
Monitoring dashboard
Monitoring dashboard for remote control of the LED installation.
Monitoring software
Software for monitoring the performance and consumption of the LED installation.
Mono LED strip
Monochromatic single-color or fixed-temperature LED strip.
Monochromatic LED
LED emitting a single wavelength; red, green, blue, amber.
Monolocale LED
LED lighting scheme for studios with multiple scenes.
Montaggio a clip
Fixing system of the LED profile via metal or plastic clips screwed to the surface.
Montaggio a clip del profilo
Technique for fixing the LED profile via clips screwed to the surface.
Montaggio a colla del profilo
Technique for fixing the LED profile with structural adhesive.
Montaggio a incasso
Installation of the LED profile inside a recess or prepared cavity in the surface.
Montaggio a incasso del profilo
Insertion of the LED profile into a recess in the surface.
Montaggio a sospensione
Fixing of the LED profile with steel cables or rigid rods for suspension from the ceiling.
Montaggio a sospensione del profilo
Suspension of the LED profile from the ceiling with steel cables.
Montaggio a vista (surface mount)
Installation of the LED profile directly on the surface without recess; the profile remains visible.
Montaggio a vista del profilo
Application of the LED profile directly on the visible surface.
Montaggio del diffusore
Insertion of the cover into the guide of the LED profile.
Montaggio dell'end cap
Application of the end cap to the ends of the LED profile.
Montaggio della strip nel profilo
Procedure for inserting the LED strip into the seat of the profile.
Montaggio magnetico
System using built-in magnets to fix the LED strip or profile to metal surfaces.
Montaggio rapido profilo LED
Quick installation of the LED profile with snap-on clips.
Montaggio senza attrezzi
Installation of the LED profile with snap-on systems without tools.
Monument lighting LED
LED lighting of monuments and urban works of art.
Mood board
Visual inspiration board for the LED lighting project.
Mood lighting
Atmospheric LED lighting; color and intensity to create moods.
Moonlight mode
LED mode with minimum brightness and warm CCT; simulates moonlight.
Morsettiera
Terminal block for orderly connection of power and signal cables.
Morsetto di prova
Terminal for temporary connection during LED installation testing.
Mosaic LED
Artistic composition with LED modules of different colors and intensities.
Moschea LED
LED lighting for mosques; respect for architecture and atmosphere.
MOSFET di commutazione
Switching transistor in the switching LED driver.
MOSFET di potenza
Power transistor for switching in the LED driver.
Motion activated lighting
LED lighting activated upon motion detection.
Motion activated strip
LED strip with integrated motion sensor.
Motion detection range
Range of the motion sensor for LED activation.
Motion detector ceiling mount
Ceiling-mounted motion sensor for LED control.
Motion detector wall mount
Wall-mounted motion sensor for LED control.
Motion sensor dimming
Automatic dimming based on the presence of people detected by sensors.
Motion sensor LED strip
LED strip with integrated motion sensor in the profile.
Motion sensor range
Maximum range of the motion sensor for LED activation.
Motion sensor sensitivity
Adjustable sensitivity of the motion sensor for LEDs.
Motor driven dimmer
Motorized dimmer for automatic LED brightness adjustment.
Motor protection
Protection of motors in LED cooling fans.
Mount type
Type of mounting of the LED profile: recessed, surface, suspended, angled.
Mounting adhesive
Adhesive used to fix the LED profile to the surface.
Mounting adhesive tape
Double-sided tape for mounting the LED profile on the surface.
Mounting angle
Mounting angle of the LED profile relative to the surface.
Mounting base plate
Base plate for mounting the LED power supply.
Mounting bracket
Mounting bracket for LED profiles and fixtures.
Mounting center distance
Distance between the centers of the fixing holes of the LED profile.
Mounting channel
Mounting channel into which the LED profile is inserted.
Mounting clip spacing
Recommended distance between fixing clips along the LED profile.
Mounting depth
Depth required to install a recessed LED profile.
Mounting detail
Construction detail of the LED profile mounting on the surface.
Mounting dimension
Dimensions for mounting the LED profile.
Mounting flange
Mounting flange of the LED profile for fixing with screws.
Mounting hardware kit
Hardware kit for mounting the LED profile.
Mounting height
Height at which the LED fixture is installed relative to the work plane.
Mounting hole pattern
Pattern of fixing holes on the LED profile.
Mounting instruction manual
Instruction manual for mounting the LED profile and strip.
Mounting method selection
Choice of mounting method based on the LED application.
Mounting option
Available mounting option for the LED profile.
Mounting plate
Fixing plate for LED power supplies and controllers.
Mounting point
Fixing point of the LED profile on the surface.
Mounting position
Mounting position of the LED fixture: ceiling, wall, floor.
Mounting rail
Mounting rail for linear LED profiles.
Mounting screw
Fixing screw for profiles, clips, and LED accessories.
Mounting spring
Fixing spring for recessed LED profiles in the suspended ceiling.
Mounting surface
Surface on which the LED profile is installed (wood, metal, drywall).
Mounting surface preparation
Preparation of the surface for mounting the LED profile.
Mounting template drawing
Drawing of the mounting template for positioning the LED profile.
Mounting tolerance
Allowed tolerance in positioning the LED profile during mounting.
Mounting track system
Guide system for sliding mounting of LED profiles.
Moving head LED
Motorized moving head LED for stage and dynamic architectural lighting.
MQTT
IoT messaging protocol for smart LED control.
MTBF (alimentatore)
Mean time between failures of the power supply; reliability indicator.
Mullion lighting
LED lighting integrated into mullions of curtain walls.
Mullion mount LED
Mounting of LED strips on mullions of glass curtain walls.
Multi-beam optic
Optics producing multiple light beams from a single LED.
Multi-beam reflector
Reflector producing multiple light beams from a single LED source.
Multi-channel amplifier
Multi-channel amplifier for distributing the LED signal.
Multi-channel controller
Controller with independent outputs to manage different LED strips separately.
Multi-chip LED array
Array of multiple LED chips on a common substrate for high brightness.
Multi-chip module
Module with multiple LED chips of different colors for mixing.
Multi-circuit track
Electrified track with multiple independent circuits for different groups of LED spotlights.
Multi-color effect
Multi-color effect on RGB or addressable LED strips.
Multi-die LED
LED package containing multiple dies for high luminous flux.
Multi-driver configuration
LED installation with multiple power supplies for redundancy or zoning.
Multi-function controller
LED controller with multiple functions: dimming, color, scenes, timer.
Multi-level dimming
Dimming at multiple preset levels for LED control.
Multi-line installation
Installation of multiple parallel rows of LED profiles.
Multi-mode operation
LED fixture with different selectable operating modes.
Multi-output driver
LED driver with multiple outputs to power different groups.
Multi-point feeding
Powering the LED strip from multiple points for voltage uniformity.
Multi-purpose room LED
LED lighting for multipurpose rooms with multiple scenes.
Multi-row strip
LED strip with two or more parallel rows of chips for high flux.
Multi-sensor
Combined sensor (motion + light + temperature) for LED automation.
Multi-story building LED
LED lighting for multi-story buildings with centralized management.
Multi-string driver
Driver powering multiple LED strings in parallel.
Multi-tap transformer
Transformer with multiple taps for different LED output voltages.
Multi-zone controller
LED controller managing independent zones with different scenes.
Multi-zone dimmer
Dimmer with independent channels for different LED zones.
Multi-zone sensor
Sensor covering multiple zones for independent LED control.
Multicolor
LED strip capable of emitting multiple colors, either via RGB mixing or dedicated colored LEDs.
Multimetro digitale
Instrument for measuring voltage, current, and resistance in the LED circuit.
Multizone
LED control system allowing independent management of different areas (zones).
Municipal LED
LED lighting for municipal public spaces: streets, parks, squares.
Mura (difetto)
Visible unevenness in brightness or color on an LED surface.
Museo LED
LED lighting for museums; CRI>95, low UV, and protection.
Museum application
LEDs with low UV/IR emission for artwork conservation.
Museum display LED
LED lighting for museum cases and showcases; low UV and high CRI.
Museum quality LED
LED with CRI above 95 and very low UV emission for museums.
Mushroom style LED
Mushroom-shaped LED fixture for garden lighting.
Music hall LED
LED lighting for concert halls and auditoriums.
Music reactive controller
LED controller synchronizing effects to music.
Music sync LED strip
Addressable LED strip reacting to music in real time. ↑ Back to top
N
Nail gunNail gun for quick fixing of LED clips on wood.
Nail mount
Mounting with nails of the LED profile on wooden surfaces.
Nail plate
Metal plate for fixing LED profiles with nails on wood.
Nail plate protector
Metal plate protecting LED cables from nails in wood.
Name plate data
Technical data on the nameplate of the LED power supply.
Name plate rating
Nominal data on the nameplate of the LED power supply.
Nameplate
Label with technical data applied to LED power supplies and fixtures.
Nano coating
Nanotechnology hydrophobic coating on outdoor LED profiles.
Nano LED
Nanometric-sized LED; research technology for future displays.
Nano particle coating
Coating with nanoparticles for anti-fouling properties on LED profiles.
Nano profilo
Miniaturized LED profile with a cross-section of a few millimeters; for applications in furniture and architectural details.
Nano-texture
Surface nanostructure on LED diffusers for advanced optical control.
Nanometer (nm)
Billionth of a meter; unit of measurement for the wavelength of LED light.
Narrow angle LED
LED with a narrow emission angle for focused lighting.
Narrow beam
Narrow beam (≤15°); with collimating optics on LED sources.
Narrow channel profile
LED profile with a narrow channel for 5-8 mm strips.
Narrow distribution
Concentrated light distribution with a narrow angle.
Narrow profile
LED profile with reduced width for installations in limited spaces.
Narrow profile LED
LED profile with reduced width for installations in limited spaces.
Narrow spectrum LED
LED with a narrow emission spectrum; monochromatic.
Nastro biadesivo termoconduttivo
Tape conducting heat from the LED strip to the profile.
Nastro biadesivo VHB
3M Very High Bond tape for permanent fixing of LED strips.
Nastro di rame
Copper adhesive tape for EMI shielding of LED circuits.
Nastro isolante
PVC tape for insulating LED electrical connections.
Nastro LED
Synonym for LED strip; flexible circuit with mounted LEDs.
Nastro LED adesivo
LED strip with double-sided tape on the back for direct mounting.
Nastro luminoso
See LED strip. Colloquial term for LED strip.
Nastro per mascheratura
Masking tape to protect surfaces during LED installation.
Nastro termico
Heat-resistant tape for masking during LED soldering.
Natural anodized finish
Natural anodized finish maintaining the silver color of aluminum.
Natural anodizing
Natural anodizing of aluminum maintaining the silvery color.
Natural convection cooling
Cooling by natural convection without a fan; standard for LED profiles.
Natural cooling
Natural cooling by convection without forced ventilation; standard for LED profiles.
Natural daylight LED
LED simulating the spectrum of natural daylight.
Natural light sensor
Natural light sensor for daylight harvesting of the LED installation.
Natural light simulation
Simulation of natural light with tunable white and full-spectrum LEDs.
Natural ventilation
Natural ventilation contributing to the thermal dissipation of LED profiles.
Natural white (4000K)
See Natural white. Balanced temperature for multifunctional environments.
Natural white LED strip
4000K natural white LED strip for balanced environments.
Nave industriale LED
LED lighting for industrial warehouses; high bay and sensors.
Navigation aid
Navigation aid with LEDs for marine and airport environments.
Navigation aid LED
LED light for maritime and aeronautical navigation aid.
Navigation light LED
LED navigation light for boats and airports.
NB-IoT LED
LED controlled via narrowband IoT network for smart cities.
Near field communication (NFC)
Short-range communication for configuring LED drivers.
Near infrared LED
LED emitting in the near infrared (700-850 nm) for sensors.
Near-UV LED
LED emitting in the near-ultraviolet region (380-400 nm).
Needle nose plier
Long-nose pliers for precision work on LED strips.
Negative bus bar
Negative busbar for distributing the ground in LED circuits.
Negative lead
Negative conductor (-) in the power cable of the LED strip.
Negative temperature coefficient
Characteristic of NTC thermistors used for LED thermal monitoring.
Negative terminal
Negative terminal (-) of the power supply or LED strip.
Negotiated bid
Negotiated offer for the supply of an LED installation.
Negozio LED
Physical or online store specialized in LED products.
Neon bend tool
Tool for bending LED neon flex with precision.
Neon channel letter
Luminous letter made with LED neon flex for signs.
Neon effect
Visual effect simulating the appearance of neon tubes with LED strips or neon flex.
Neon flex 360
Neon flex with 360-degree emission for a complete tubular effect.
Neon flex accessories
Accessories for neon flex: clips, end caps, connectors, power supply.
Neon flex adapter
Power connector specifically for LED neon flex.
Neon flex adhesive
Specific adhesive for fixing LED neon flex.
Neon flex bend radius
Minimum bending radius of the neon flex without damaging it.
Neon flex bracket
Fixing bracket specifically for LED neon flex.
Neon flex channel
Mounting profile for LED neon flex on flat surfaces.
Neon flex clip
Fixing clip dedicated to LED neon flex.
Neon flex color
Color of the LED neon flex: white, RGB, monochromatic.
Neon flex connector
Specific connector for joints and power supply of LED neon flex.
Neon flex controller RGB
Specific controller for RGB LED neon flex with color change.
Neon flex cutter
Tool for precise cutting of LED neon flex.
Neon flex cutting point
Predefined cutting point on the LED neon flex.
Neon flex diffuser
Diffusing sleeve of the neon flex that uniformizes the light.
Neon flex dome
Neon flex with a semicircular section with 180° emission.
Neon flex driver
Power supply specifically for LED neon flex.
Neon flex end cap
Sealed end cap for LED neon flex.
Neon flex flat-top
Neon flex with a flat rectangular section; for flat surfaces.
Neon flex installation guide
Installation guide for LED neon flex.
Neon flex IP67
Neon flex with IP67 protection for outdoor installations.
Neon flex IP68
Neon flex with IP68 protection for underwater installations.
Neon flex junction
Junction between two sections of LED neon flex.
Neon flex LED
Flexible silicone tube encasing an LED strip to simulate the appearance of traditional neon tubes.
Neon flex letter
Luminous letter made with LED neon flex.
Neon flex mini
Reduced-section version of neon flex, for tighter curves and compact installations.
Neon flex mounting channel
Mounting channel specifically for LED neon flex.
Neon flex mounting track
Mounting guide for LED neon flex.
Neon flex per esterni
LED neon flex with IP67 protection for outdoor installations.
Neon flex per insegne
LED neon flex used for making luminous signs.
Neon flex per interni
IP20 LED neon flex for decorative indoor installations.
Neon flex per lettere
LED neon flex for making individual luminous letters.
Neon flex per scritte
LED neon flex for customized luminous writings.
Neon flex power feed
Power connector for LED neon flex.
Neon flex profilo di montaggio
Mounting channel specifically for fixing LED neon flex.
Neon flex retroilluminazione
LED neon flex used for backlighting panels and signs.
Neon flex RGB
RGB color-changing LED neon flex.
Neon flex RGBW
Neon flex with four channels for colors and white.
Neon flex side-bend
Neon flex designed to bend sideways rather than up/down; for writings and shapes on flat surfaces.
Neon flex sign
Luminous sign made with LED neon flex.
Neon flex silicone
Neon flex made of high-quality silicone for flexibility and durability.
Neon flex specification
Technical specifications of the LED neon flex: power, CCT, IP, dimensions.
Neon flex square
Neon flex with a square section for a geometric effect.
Neon flex taglio a misura
Cutting service of LED neon flex to the desired length.
Neon flex to strip adapter
Adapter for connecting LED neon flex to a standard strip.
Neon flex top-bend
Standard neon flex bending upwards and downwards.
Neon flex tunable white
LED neon flex with adjustable color temperature.
Neon replacement
Replacement of traditional neon tubes with LED neon flex.
Neon replacement LED
Strip or LED neon flex to replace traditional neon tubes.
Neon sign LED
Luminous sign made with LED neon flex instead of traditional neon tubes.
Neoprene (guarnizione)
Synthetic rubber for IP gaskets of LED profiles.
Nest (alloggiamento)
Seat in the LED profile accommodating the strip and diffuser.
Net metering (LED)
Energy savings from LED lighting contributing to the building's energy balance.
Net zero building
Net-zero building where LEDs contribute to efficiency.
Net zero energy
Net-zero energy building; LED lighting contributes.
Network address
Network address of an LED device in an IP system.
Network address assignment
Assignment of network addresses to LED devices.
Network architecture
Architecture of the LED control network: topology, protocols.
Network bridge
Device connecting two different LED control networks.
Network cable
Network cable for transporting Art-Net/sACN signals for LEDs.
Network commissioning
Configuration of the LED control network during commissioning.
Network configuration
Configuration of the LED control network (addresses, groups, scenes).
Network controller
LED controller with network connectivity for remote management.
Network device
Device connected to the LED control network.
Network diagnostics
Diagnostics of the LED control network for fault identification.
Network interface
Network interface of the LED controller for Ethernet or Wi-Fi connection.
Network latency
Delay in communication between the controller and LED devices on the network.
Network management
Management of the LED control network with dedicated software.
Network monitoring
Monitoring of the LED control network for performance and faults.
Network protocol
Communication protocol for controlling LED installations on a network.
Network protocol stack
Stack of communication protocols for LED control on a network.
Network security
Security of the LED control network: encryption and authentication.
Network switch
Network switch for distributing the LED control signal.
Network topology design
Design of the topology of the LED control network.
Neutral conductor
Neutral conductor of the network; connected to the input of the LED power supply.
Neutral density filter
Optical filter reducing brightness without altering color; for LED testing.
Neutral position
Neutral position of a dimmer or LED controller; no active adjustment.
Neutral white LED
Neutral white LED (4000-4500K); the most balanced shade.
Neutral wire
Neutral conductor of the network; required for some smart LED dimmers.
New build lighting
LED lighting designed for a building under construction.
New construction LED
LED lighting for new constructions with integration from the project.
Newsletter LED
Periodic communication with news and offers on LED products.
NFC commissioning
Configuration of the LED driver via NFC communication without power.
NFC tag
NFC tag applied to the LED fixture for configuration and identification.
Nicchia a muro LED
Wall recess with integrated LED lighting for decoration.
Nicchia da bagno LED
Bathroom niche with LED strip for lighting products and objects.
Nicchia illuminata
Wall recess with LED strip for decorative effect.
Nicchia luminosa
Architectural recess with integrated LED strip for accent light.
Nicchia per strip LED
Recess in the wall or furniture for housing the LED strip.
Nichia
See "LED Nichia". Japanese manufacturer of LED chips, leader in phosphor technology.
Nichia 757
Nichia 757 series LED chip; one of the most efficient SMDs for LED strips.
Nichia E21A
Nichia E21A LED chip with very high CRI for professional strips.
Nichia Optisolis
Nichia Optisolis series with a spectrum similar to sunlight.
Nickel finish
Nickel finish on LED profiles for aesthetics and resistance.
Nickel plating
Nickel coating of contacts to prevent oxidation.
Nido d'ape (griglia)
Honeycomb anti-glare structure for LED fixtures.
Night dimming
Automatic reduction of LED brightness during night hours.
Night dimming schedule
Programming of nighttime dimming of outdoor LED lighting.
Night light mode
LED mode with minimum brightness and warm CCT for night hours.
Night mode
LED configuration with reduced and warm light for nighttime comfort.
Night mode automatico
Night mode automatically activating based on time or ambient light.
Night mode LED
Mode with minimum and warm light for nighttime comfort.
Night shift lighting
LED lighting for night shifts; warm CCT and reduced intensity.
Night sky friendly
LED lighting respecting the night sky; emission only downwards.
Night sky protection
LED lighting designed to minimize light pollution of the night sky.
Night vision compatible
LED with a spectrum that does not compromise night vision; red or amber.
Night vision preservation
Red or amber LED lighting preserving night vision.
NiMH accumulator
Nickel-metal hydride battery for emergency LED; eco-friendly alternative to NiCd.
Lithium-ion accumulator
Rechargeable lithium-ion battery used in emergency LED modules for high energy density.
Nit (cd/m²)
Informal unit of luminance; 1 nit = 1 candela per square meter.
Nit brightness
Luminance expressed in nits (cd/m2); for comparing luminous surfaces.
Nitrogen fill
Nitrogen filling of sealed LED fixtures to prevent condensation.
Nitruro di gallio (GaN)
Fundamental semiconductor for the production of blue and white LED chips.
NMT (connettore)
Press-fit connector without soldering for quick connections on LED strips.
NMT connector
Press-fit connector without soldering for professional LED strips.
No-dim driver
LED driver without dimming function; only on/off.
No-dim mode
Mode of the LED power supply without dimming; fixed output.
No-drill mount
Mounting system for LED profiles that does not require drilling the surface.
No-load consumption
Consumption of the power supply without an LED load; to be minimized for energy savings.
No-load voltage
Voltage of the LED power supply without a connected load.
No-load power consumption
Power absorbed by an LED power supply without load; standby mode.
Node (nodo)
Single device in an LED control mesh network.
Node firmware
Internal software of a node in the LED control network.
Node ID
Unique identifier of an LED device in a mesh network.
Noise filter
Anti-noise filter in the LED driver to reduce EMI interference.
Noise floor
Minimum electrical noise level in an LED system; affects dimming quality.
Noise immunity
Capability of the LED system to function correctly in the presence of disturbances.
Noise immunity test
Electrical noise immunity test of the LED driver.
Noise level
Acoustic noise level generated by the LED power supply; in dB.
Noise suppression
Suppression of electrical disturbances in the LED driver.
Nominal current
Nominal operating current of the LED specified by the manufacturer.
Nominal voltage
Nominal voltage of the LED strip (5V, 12V, 24V, 48V DC).
Non-combustible
LED profile material that does not propagate flame.
Non-contact dimming
Contactless dimming via proximity or gesture sensor.
Non-contact sensor
Sensor detecting without physical contact; for LED activation.
Non-contact switch
Contactless switch for LED activation with gesture or proximity.
Non-corrosive fixture
LED fixture made of corrosion-resistant materials.
Non-corrosive LED
LED fixture resistant to corrosion for chemically aggressive environments.
Non-dimmable driver
LED power supply without dimming function.
Non-dimmable strip
LED strip designed for operation only at full brightness.
Non-dimming mode
Mode of the LED power supply with fixed output at 100%.
Non-emergency mode
Normal operation of the LED fixture with mains power.
Non-flammable cable
Non-flammable cable for LED installations in public buildings.
Non-glare fixture
LED fixture with a low UGR glare index.
Non-hazardous area
Non-hazardous area; standard LED fixtures are sufficient.
Non-invasive mounting
Mounting of the LED profile without damaging the existing surface.
Non-inverting driver
LED driver maintaining the polarity of the control signal.
Non-linear dimming
Dimming with a non-linear curve for a more natural perception of brightness.
Non-maintained emergency
Emergency LED fixture that turns on only during a blackout.
Non-metallic conduit
PVC tube for protecting LED cables.
Non-shunted socket
Lamp holder with separated contacts for direct LED tubes.
Non-standard profile
LED profile with non-standard dimensions; custom-made.
Non-volatile storage
Non-volatile memory in the LED controller for permanent saving.
Nonvolatile memory
Memory retaining data even without power; for LED settings.
Norma EN 12464-1
European standard defining illuminance requirements for indoor work environments.
Norma EN 12464-1 corridoi
LED illuminance requirements for corridors: 100 lux, UGR<25.
Norma EN 12464-1 negozi
LED illuminance requirements for shops: 300 lux, CRI>80.
Norma EN 12464-1 uffici
LED illuminance requirements for offices: 500 lux, UGR<19, CRI>80.
Norma EN 12464-2
Illuminance requirements for outdoor work areas.
Norma EN 13201
European standard for street and outdoor area lighting.
Norma EN 1838
Requirements for emergency lighting.
Norma EN 60598
Safety standard for lighting fixtures, including those with LED sources.
Norma EN 61347
Safety standard for lamp controlgear, including LED drivers.
Norma EN 62031
Specific safety for LED modules.
Norma EN 62471
Standard on the photobiological safety of lamps and LED fixtures (blue light hazard).
Normal incidence
Light beam perpendicular to the surface; zero angle of incidence.
Normal mode
Ordinary operating mode of the LED fixture.
Normal operation mode
Ordinary operation of the LED fixture with all nominal parameters.
Normally closed (NC)
Normally closed relay contact; for emergency LED circuits.
Normally lit
LED fixture normally on; turns off only on command.
Normally open (NO)
Normally open relay contact; for LED circuits with external command.
Normativa antincendio LED
Fire safety requirements applicable to LED profiles and fixtures.
Normativa applicabile LED
Set of technical and legislative standards valid for the LED product.
Normativa di installazione LED
Standards governing the mounting and connection of the LED installation.
Normativa di prodotto LED
Safety and performance standards applicable to the LED product.
Normativa di progetto LED
Lighting standards for the design of the LED installation.
Normativa edilizia LED
Building regulations governing the installation of LED installations.
Normativa elettrica LED
Electrical standards applicable to the design and installation of LED installations.
Normativa EN 12464-1 LED
European standard on illuminance for indoor work environments with LEDs.
Normativa EN 13201 LED
European standard for street and outdoor area lighting with LEDs.
Normativa energetica LED
European directives on the energy efficiency of LED fixtures.
Normativa illuminotecnica
Set of standards regulating LED lighting: EN 12464, EN 13201, etc.
Normativa LED esterno
Standards for outdoor LED lighting: EN 13201 for roads, light pollution.
Normativa LED interno
Standards for indoor LED lighting: EN 12464-1 for work environments.
Normativa sicurezza LED
Safety standards for LED products: EN 60598, EN 61347.
Normativa WEEE LED
WEEE directive applied to the disposal of LED products.
Nose (profilo)
Projecting edge of the LED profile facing the surface.
Nota di credito LED
Document for the return of non-conforming LED products.
Nota di montaggio LED
Technical note for the correct mounting of the LED system.
Nota tecnica LED
Informative document with technical insights on LED products.
Notch (incavo)
Recess in the LED profile for the passage or attachment of components.
Notch dimming
Dimming with predefined notches of selectable brightness.
Notch filter
Optical filter eliminating a narrow band of wavelengths from the LED spectrum.
Notifica push LED
Smartphone notification from the status of the smart LED installation.
Notification LED
Notification LED signaling system events or status.
Notizie dal mondo LED
Updates on technological and market news in the LED sector.
Novità del catalogo LED
Latest LED products added to the manufacturer's catalog.
Novità tecnologica LED
Recent innovation in LED technology.
NPF (serie Mean Well)
Mean Well power supply family slim and compact for LED installations with limited space.
NPN driver
Driver circuit with NPN transistor for low-power LEDs.
NPN transistor
Transistor used in switching circuits for low-power LEDs.
NTC (sensore)
Negative coefficient thermistor used to monitor LED temperature and activate thermal protections.
Null modem
Cable with crossed connections; for direct connection between PC and DMX controller.
Number of channels
Number of channels of the LED controller; determines how many strips it can handle.
Number of LEDs per meter
Density of LEDs on the strip; from 30 to 700+ LED/m.
Numero d'ordine LED
Identification number of the order for LED products.
Numero di alimentatori LED
Quantity of drivers required for the LED installation.
Numero di canali controller
Number of independent channels managed by the LED controller.
Numero di clip profilo
Number of clips required for fixing the LED profile.
Numero di connettori strip
Number of connectors required for LED strip joints.
Numero di end cap profilo
Number of end caps required for the LED profiles.
Numero di LED per segmento
Number of LED chips in a cutting segment of the strip.
Numero di metri di strip LED
Total length of LED strip required for the project.
Numero di profili LED
Number of LED profiles required for the project.
Numero di punti luce
Total number of LED fixtures in the lighting installation.
Numero di zone controller
Number of independent zones manageable by the LED controller.
Nuova generazione LED
Latest generation LED products with improved efficiency and performance.
Nuovo prodotto LED
LED item recently launched on the market.
Nurse call LED
LED indicator in the nurse call system in hospitals.
Nursery LED
LED lighting for nurseries; safe and colorful.
Nut plate
Plate with integrated nuts for fixing LED profiles.
Nylon (clip)
Plastic material for fixing clips of LED profiles. ↑ Back to top
O
O-ring sealO-ring seal for waterproof LED connectors.
OAK finish profile
LED profile with oak effect finish for integration with furnishings.
Obbligo di manutenzione LED
Regulatory requirements for periodic maintenance of the LED installation.
Obbligo di marcatura CE
Legal requirement for CE marking for the commercialization of LED products in Europe.
Obiettivo di illuminamento
Target lux level on the work surface in the LED project.
Obiettivo di progetto LED
Performance result to be achieved with the LED installation.
Obiettivo di risparmio
Target for reducing energy consumption with LED lighting.
Obiettivo di risparmio energetico LED
Target for reducing consumption with LED lighting.
Obiettivo di uniformità
Target min/avg ratio of illuminance on the surface.
Obiettivo illuminotecnico LED
Performance target of the LED installation: lux, uniformity, UGR, CRI.
Object detection
Object detection for selective activation of LED lighting.
Object illumination
Targeted LED lighting on a specific object; accent lighting.
Oblique angle
Oblique installation angle of an LED fixture for directional effects.
Oblique mounting
Inclined mounting of the LED profile relative to the surface.
Observation area lighting
LED lighting for observation and monitoring areas.
Obstruction light controller
Controller for LED obstruction warning lights.
Obstruction light LED
LED obstruction warning light on towers and tall buildings.
Obstruction marking
LED signage for obstacles in air navigation areas.
Occhiali di protezione
Protective glasses for cutting and processing LED profiles.
Occupancy based scheduling
Programming of LED lighting based on occupancy prediction.
Occupancy dimming profile
Dimming profile based on presence: full with people, reduced without.
Occupancy history
History of occupancy data for optimizing LED lighting.
Occupancy pattern
Typical occupancy pattern used for LED programming.
Occupancy sensor
Occupancy sensor activating LEDs when it detects people.
Occupancy timeout
Time after which LEDs turn off in the absence of people.
Occupancy-based control
LED control based on the presence of people detected by sensors.
Occupant comfort
Comfort of occupants in relation to LED lighting.
Ocean rated LED
LED fixture certified for use in extreme ocean environments.
Oculare protettivo
Eye protection during cutting and processing of LED profiles.
Off-axis performance
Luminous performance of the LED off the main optical axis.
Off-center mount
Off-center mounting of the LED profile relative to the surface axis.
Off-grid controller
LED controller for systems powered by solar or wind energy.
Off-grid installation
Autonomous LED installation without connection to the electrical grid.
Off-grid LED
LED system powered by autonomous sources (solar panels, batteries).
Off-peak scheduling
Programming of LED lighting during off-peak hours.
Off-site fabrication
Prefabrication of LED components in the workshop before installation.
Off-state current
Residual current flowing through the LED when the dimmer is at zero.
Offerta commerciale LED
Commercial proposal for the supply of LED products.
Offerta economica LED
Price proposal for the supply of LED products.
Offerta LED personalizzata
Customized commercial proposal for the specific LED project.
Offerta speciale LED
Commercial promotion with reduced prices on LED products.
Offerta tecnica LED
Technical and economic proposal for an LED lighting project.
Office application
LED lighting for offices; UGR below 19 and 500 lux on work surfaces.
Office ceiling LED
LED lighting for office ceilings; panels and linear profiles.
Office desk LED
LED lighting for desks for the visual task.
Office dimming
Dimming of LED lighting in offices for comfort and savings.
Office glare control
Control of LED glare in offices; UGR below 19.
Office LED panel
600x600 mm LED panel for modular office suspended ceilings.
Office lighting calculation
Lighting calculation for offices according to EN 12464-1 with LEDs.
Office lighting design
Specific design of LED lighting for office environments.
Office retrofit LED
Replacement of fluorescent lighting with LEDs in existing offices.
Offset angle
Offset angle of the LED beam relative to the fixture axis.
Offset bracket
Mounting bracket with offset for positioning the LED profile off-center.
Offset di colore
Color difference between the LED strip and the desired target color.
Offset di luminosità
Difference between measured and declared brightness of the LED strip.
Offset mounting
Mounting of the LED profile off-center relative to the surface axis.
Offset termico
Difference between the junction temperature and the ambient temperature.
Ohm (Ω)
Unit of measurement of electrical resistance; in LED strips, resistors limit current to the chips.
Ohm's Law
Law V=I×R for calculating voltage, current, and resistance in LED circuits.
Ohmmetro
Instrument for measuring resistance in LED circuits.
Oil-tight connector
Oil-resistant connector for LED systems in industrial environments.
OLED
Organic light-emitting diode; alternative technology to inorganic LEDs for flexible luminous surfaces.
Olografia LED
Holographic display technique with LED sources.
Ombreggiatura
Shadow effect created by the non-uniform distribution of LED light.
Omnidirectional LED
LED emitting light in all directions (360 degrees).
Omologazione LED
Approval process for a LED product for commercialization.
On-board controller
Controller integrated into the PCB of the addressable LED strip.
On-board driver
LED driver integrated directly on the strip or rigid bar.
On-demand lighting
LED lighting activated only when needed via sensors.
On-off control
LED control with only on and off without dimming.
On-site assembly
Assembly of LED components directly on the construction site.
On-site calibration
Field calibration of the LED installation after installation.
On-site commissioning
Commissioning of the LED installation directly on site.
On-site measurement
Field measurement of LED parameters after installation.
On-site survey
Technical site survey for the design of the LED installation.
On-site test
Functional test of the LED installation performed directly on site.
Ondulazione di uscita
Residual variation of the DC voltage on the output of the LED driver; causes flicker.
Ondulazione residua uscita
Periodic variation of the DC voltage on the output of the LED driver.
One-channel driver
LED driver with a single output for monochromatic strips.
One-circuit track
Single-circuit electrified LED track.
One-piece profile
LED profile in a single piece with co-extruded diffuser.
One-push dimming
Dimming with a single button: short press on/off, long press dim.
Online catalog
Online catalog of the manufacturer's LED products.
Online configurator
Web tool for configuring and ordering custom LED systems.
Online design tool
Online tool for designing the LED installation.
Online monitoring
Continuous remote monitoring of the LED installation via a web platform.
Online ordering
Online ordering of LED products with direct shipping.
Online product selector
Online selector for choosing the appropriate LED product.
Online support
Online technical support for LED installation and configuration.
Online training
Online training for LED installers and designers.
Opacità del diffusore LED
Degree of non-transparency of the cover; more opaque = more uniform.
Opacità del diffusore opale
Degree of opacity of the opal cover; uniformizes the light.
Opacity (opacità)
Degree of non-transparency of the diffuser; higher opacity = more diffusion.
Opal diffuser efficiency
Efficiency of the opal diffuser; typical transmission 65-75%.
Opal glass
Opal glass for high-quality LED diffusers.
Opal glass diffuser
Opal glass diffuser for superior optical quality.
Opal PC diffuser
Opal polycarbonate diffuser; impact-resistant.
Opal PMMA diffuser
Opal PMMA diffuser; maximum luminous transparency.
Opale (diffusore)
See "Opal cover". Type of white diffuser that completely uniformizes the light.
Open area emergency
Anti-panic LED lighting for open areas larger than 60 m2.
Open area lighting
Emergency LED lighting for open spaces larger than 60 m2.
Open ceiling mount
Mounting of LED profiles on open ceilings without a suspended ceiling.
Open channel profile
LED profile with an open upper section without a diffuser.
Open circuit
Open circuit (interrupted); in an LED strip indicates a fault with a section off.
Open circuit detection
Open circuit detection in the LED driver for diagnostics.
Open circuit voltage
No-load voltage of the LED power supply.
Open frame driver
LED driver without enclosure; for mounting in closed fixtures.
Open loop control
LED control without feedback; the system does not verify the result.
Open plan office LED
LED lighting for open-plan offices; low UGR and zoning.
Open protocol
Non-proprietary open protocol for LED control: DALI, DMX, KNX.
Open source controller
LED controller based on an open-source platform.
Open space lighting
LED lighting for large open-plan environments.
Open structure profile
LED profile with an open section for maximum thermal dissipation.
Open terminal accessory
Open end cap for cable passage in LED profiles.
Operating cost
Operating cost of LED lighting including energy and maintenance.
Operating current
Actual operating current of the LED under operating conditions.
Operating current range
Operating current range of the LED driver.
Operating cycle
Operating cycle of the LED installation: hours of on-time per day.
Operating environment
Environmental conditions of operation of the LED system.
Operating hours
Accumulated operating hours of the LED installation.
Operating instruction
Operating instructions for the use and management of the LED installation.
Operating life
Total operating life of the LED system; 50,000-100,000 hours for the best.
Operating manual
Operating manual of the LED installation for the user.
Operating mode
Operating mode of the LED system: normal, emergency, test.
Operating point
Operating point of the LED on the I-V curve.
Operating position
Installation position of the LED fixture: horizontal, vertical, inclined.
Operating power
Actual operating power of the LED strip in operation.
Operating temperature range
Temperature range in which the LED system operates correctly.
Operating voltage
Operating voltage of the LED strip under load.
Operational amplifier
Operational amplifier in LED control circuits.
Operator interface
Operator interface for managing the LED installation.
Operator panel
Control panel for manual management of LED lighting.
Operatore di impianto LED
Technical operator responsible for the management and maintenance of the LED installation.
Opinione del cliente LED
Customer review of the LED product or service received.
Opposing reflector
Opposing reflector for redirecting LED light in the opposite direction.
Optical adapter
Optical adapter for modifying the LED beam distribution.
Optical adjustment
Optical adjustment of the LED fixture for focusing.
Optical axis
Optical axis of the LED; direction of maximum luminous intensity.
Optical bench
Optical bench for precision measurement of LED performance.
Optical cable
Fiber optic cable for data or light transport in LED systems.
Optical calculation
Optical calculation of the light distribution of the LED system.
Optical center
Optical center of the LED lens; point of maximum intensity.
Optical component
Optical component of the LED system: lens, diffuser, reflector.
Optical contact
Optical contact between the LED and the light guide without an air gap.
Optical coupler
Optical coupler for transferring light from an LED source to a guide.
Optical cross-talk
Light contamination between adjacent LED channels.
Optical data
Optical data of the LED product: angle, distribution, efficiency.
Optical density
Optical density of the diffuser; higher = more uniform but more loss.
Optical design software
Software for the optical design of LED fixtures.
Optical distance
Optical distance between the LED source and the work plane.
Optical efficiency
Optical efficiency of the complete system (lens, diffuser, profile) compared to the flux emitted by the LED chip.
Optical efficiency rating
Classification of the optical efficiency of the LED fixture.
Optical fiber cable
Fiber optic cable for transporting light or data in LED systems.
Optical fiber illumination
Illumination with optical fibers powered by an LED source.
Optical film
Optical film applied to the diffuser to modify LED distribution.
Optical filter
Optical filter applied to the LED source to modify color or distribution.
Optical grade material
Optical quality material for LED lenses and diffusers.
Optical grade PMMA
Optical quality PMMA for high-performance LED diffusers.
Optical insert
Interchangeable optical insert in the LED profile to control the beam.
Optical isolation
Optical separation between adjacent LED sources to avoid chromatic contamination.
Optical loss
Loss of luminous flux through lenses, diffusers, and other optical elements.
Optical path length
Length of the optical path from the LED source to the illuminated surface.
Optical power
Radiant power emitted by the LED; measured in milliwatts (mW).
Optical sensor
Sensor detecting light for feedback in LED control.
Optical simulation
Computerized simulation of the optical behavior of an LED fixture.
Optical system
Set of optical components forming the beam of the LED fixture.
Optics design
Design of optics (lenses, reflectors, diffusers) for LED fixtures.
Optimal CCT
Ideal color temperature for a specific LED application.
Optimal current
Drive current optimizing the efficiency/flux ratio of the LED.
Opto-coupler
Optical coupler for galvanic isolation of LED control signals.
Opto-electronic device
Device converting electrical signals into light; LEDs are optoelectronic devices.
Optoelectronic
Device converting electrical signals into light or vice versa; the LED is optoelectronic.
Opzione di colore strip LED
Choice of CCT or color of the LED strip for the project.
Opzione di dimmerazione LED
Possibility of dimming the LED strip: PWM, DALI, 0-10V, TRIAC.
Opzione di finitura profilo LED
Choice of finish for the LED profile: anodized, painted, RAL.
Opzione di montaggio profilo
Alternative installations for the LED profile: recessed, surface, suspended.
Opzione di protezione IP LED
Choice of IP rating for the LED strip and profile.
Optional LED accessory
Additional component not included in the base LED profile kit.
Orbit (profilo circolare)
Suspended circular LED profile for decorative lighting.
Orbital light
Suspended circular LED fixture rotating around an axis.
Order code
Unique ordering code to identify a specific LED product.
Organic compound
Organic compound used in OLED LEDs for light emission.
Organic LED (OLED)
Organic LED on a flexible substrate; alternative for luminous surfaces.
Organigramma del progetto
Organizational structure of the project team for the LED installation.
Orientabile (faretto)
LED spotlight with joint to direct the beam.
Orientamento del fascio
Direction of the LED light beam relative to the illuminated surface.
Orientamento del profilo LED
Angular positioning of the LED profile relative to the surface.
Orientamento della strip
Mounting direction of the LED strip in the profile; respect polarity.
Orientation (apparecchio)
Angular positioning of the LED fixture relative to the surface to be illuminated.
Ornamental bracket
Decorative bracket for mounting stylish LED fixtures.
Ornamental lighting
Decorative and ornamental LED lighting for events and festivities.
Orologio astronomico LED
Timer calculating sunrise and sunset for automatic control of outdoor LED lighting.
Oscillazione della luminosità
Periodic variation of LED brightness; see Flicker.
Oscillazione parassita
Unwanted oscillation in the LED driver causing instability.
Oscilloscopio
Measuring instrument displaying the waveform of PWM or DALI signals for diagnostics of LED systems.
Osmosi (protezione)
Protection of LED components from moisture absorption by osmosis.
Ospedale LED
LED lighting for hospitals; HCL, emergency, and high CRI.
Osram
See "LED Osram". German manufacturer of semiconductors and high-reliability LED chips.
Osram Duris
Osram Duris family of mid-power LED chips for strips.
Osram Osconiq
Osram Osconiq series of high-reliability LED chips.
Ossidazione dei contatti
Formation of oxide on the contacts of the LED strip increasing resistance.
Osteria LED
LED lighting for taverns and trattorias; warm CCT and atmosphere.
OTA (Over The Air)
Wireless firmware update of smart LED controllers.
Ottica a fascio variabile
LED lens with mechanically adjustable beam angle.
Ottica a riflettore parabolico
Optics with parabolic reflector for a concentrated LED beam.
Ottica asimmetrica wall-washer
Optics distributing LED light asymmetrically towards the wall.
Ottica batwing
Optics producing a double-lobe distribution for LED uniformity.
Ottica collimante LED
Lens making the divergent LED beam parallel.
Ottica di controllo fascio
Any optical element modifying the LED beam distribution.
Ottica diffondente
Optical element scattering LED light uniformly.
Ottica ellittica
LED lens with an elliptical beam for asymmetric lighting.
Ottica freeform LED
LED lens with a shaped surface for custom distributions.
Ottica honeycomb
Honeycomb grid for extreme anti-glare control.
Ottica intercambiabile
Replaceable LED lens or reflector to modify distribution.
Ottica magnetica
LED optics retained by magnets for easy replacement.
Ottica micro-strutturata
Surface with microstructures for LED beam control.
Ottica primaria
Lens integrated into the LED package forming the base distribution.
Ottica primaria LED
Lens integrated into the LED chip package.
Ottica prismatica LED
Surface with micro-prisms for controlled LED distribution.
Ottica riflettente LED
Reflector redirecting LED light towards the target surface.
Ottica secondaria
Additional lens or reflector applied after the LED source to modify its light distribution.
Ottica secondaria LED
Additional lens or reflector added after the LED to modify distribution.
Ottica simmetrica
LED optics with equal distribution in all directions.
Ottica TIR LED
Total internal reflection lens for efficient beam control.
Ottimizzazione del layout
Improvement of the arrangement of LED fixtures for uniformity.
Ottimizzazione del progetto LED
Improvement of the LED project for optimal performance and cost.
Ottimizzazione energetica
Reduction of the consumption of the LED installation with sensors and automation.
Ottimizzazione termica
Improvement of thermal management to extend LED life.
Outage
Interruption of LED lighting due to fault or blackout.
Outdoor corner accessory
Fitting for outdoor angles between two LED profiles.
Outdoor dining application
LED lighting for outdoor restaurants; IP protection and warm CCT.
Outdoor driver
LED power supply with IP protection for outdoor installation.
Outdoor enclosure
Enclosure for LED equipment designed for outdoor installation.
Outdoor LED controller
LED controller with IP protection for managing outdoor installations.
Outdoor lighting
LED lighting for outdoor spaces: gardens, roads, squares, facades.
Outdoor pathway light
LED light for outdoor pedestrian paths and gardens.
Outdoor rated
LED component certified for outdoor use (IP65 or higher).
Outdoor strip
LED strip with IP65 or higher protection for outdoor use.
Outer lens
Outer lens of an LED fixture protecting the internal optics.
Outline lighting
LED lighting of the contour of a building or architectural element.
Output (uscita)
Power, voltage, or current delivered by the LED power supply or controller.
Output cable
Output cable of the LED power supply to the strip.
Output connector
Output connector of the power supply for connecting the LED strip.
Output connector type
Type of output connector of the LED power supply.
Output current
Current delivered by the LED power supply or driver.
Output current adjustment
Adjustment of the output current of the LED driver.
Output efficiency
Efficiency of the power supply output; ratio of useful power to absorbed power.
Output fuse
Protection fuse on the output of the LED power supply.
Output ground
Ground of the LED power supply output; negative pole.
Output impedance
Output impedance of the LED driver; low for constant voltage.
Output LED calcolato
Total luminous flux of the LED installation calculated by the software.
Output LED dichiarato
Luminous flux declared by the manufacturer for the LED product.
Output LED indicator
Status LED indicating the operation of the power supply output.
Output LED misurato
Actual luminous flux measured on the installed LED installation.
Output noise
Electrical noise on the power supply output; potential cause of flicker.
Output power
Useful power delivered by the power supply to the LED strips.
Output regulation
Accuracy of the output regulation of the LED power supply.
Output ripple voltage
Residual ripple of the output voltage of the power supply.
Output terminal
Output terminal of the LED power supply for cable connection.
Output tolerance
Tolerance on the output voltage or current of the LED driver.
Output voltage
Output voltage of the LED power supply (5V, 12V, 24V, 48V DC).
Output voltage adjustment
Adjustment of the output voltage of the LED power supply via trimmer.
Oval profile
LED profile with an oval section for a rounded aesthetic effect.
Over-current trip
Intervention of the protection for excessive current in the LED circuit.
Over-engineering
Excessive sizing; in LED installations a 20% margin is good practice.
Over-voltage trip
Intervention of the protection for excessive voltage on the LED driver output.
Overcurrent protection (OCP)
Integrated protection in the power supply that intervenes in case of excessive current.
Overdriving
Driving the LED at a current above the nominal value; increases brightness but drastically reduces lifespan.
Overhead crane LED
LED lighting mounted on overhead cranes for industrial lighting.
Overhead lighting
LED lighting from above; ceiling or pendants.
Overheat indicator
LED indicator signaling overheating of the power supply or fixture.
Overheating prevention
Measures to prevent overheating of the LED system.
Overlap (giunzione)
Slight overlap between two adjacent diffusers to eliminate the dark line.
Overlay (diffusore)
Layer superimposed on the diffuser to modify diffusion or color.
Overmolding
Overmolding for sealing connectors and LED joints.
Oversize driver
Oversized power supply for greater reliability and lifespan.
Overtemperature shutdown
Automatic shutdown of the power supply for protection from excessive temperature.
Overvoltage protection (OVP)
Integrated protection in the power supply that intervenes in case of output voltage above the limit.
Oxidation
Surface oxidation of the LED strip contacts; causes resistance and malfunctions.
Oxygen-free copper
Oxygen-free copper for low-resistance LED conductors.
Ozono
Gas generated by short-wavelength UV-C LEDs; relevant in LED sanitization applications. ↑ Back to top
P
Package efficiencyEfficiency of the LED package; ratio between emitted light and power dissipated in the chip.
Package LED
Enclosure of the LED chip including the die, bond wires, phosphor, and lenses; identified by a numeric code (e.g., 2835).
Package thermal resistance
Thermal resistance of the LED package between junction and PCB.
Packaging specification
Packaging specification of LED products for transport and storage.
Packing density
Density of LED assembly on the strip PCB.
Packing foam
Protective foam in the packaging of LED strips.
Packing list
List of components included in a LED strip or profile kit.
Packing unit
Packaging unit of the LED product: reel, box, pallet.
Pad di saldatura
Copper area on the LED strip where soldering is performed for electrical connections.
Pad layout
Arrangement of soldering pads on the LED strip for connections.
Pad termico (thermal pad)
Thermally conductive sheet between strip and profile; alternative to thermal paste.
Pagamento dilazionato LED
Possibility to pay for the LED installation in monthly installments.
Pagina prodotto LED
Product page of the LED item on the manufacturer's website with specifications.
Paint booth LED
LED lighting for paint booths; explosion-proof and high CRI.
Paint matching
Painting of the LED profile with a color identical to the surrounding surface.
Painted profile
LED profile powder-coated in any RAL color.
Pair cable
Twisted-pair cable for balanced LED control signals.
Pair wiring
Twisted-pair wiring for balanced LED control signals.
Palazzo storico LED
LED lighting for historic buildings; discreet integration.
Palestra LED
LED lighting for gyms; high uniformity and anti-stroboscopic.
Pallet shipment
Pallet shipment of large quantities of LED products.
Pan head screw
Pan head screw for fixing LED clips and brackets.
Pan-tilt mechanism
Pan-tilt orientation mechanism for motorized LED fixtures.
Pane glass LED
Flat glass panel edge-lit with LED strip; for furniture and displays.
Panel ceiling mount
Mounting of LED panels in the modular suspended ceiling.
Panel connector
Panel-mounted connector for LED interface.
Panel cut-out
Hole in the panel for recessed mounting of an LED fixture.
Panel cut-out dimension
Dimension of the hole in the panel for mounting the LED downlight.
Panel driver integration
Integration of the driver into the LED panel for plug-and-play installation.
Panel efficiency
Luminous efficacy of the complete LED panel.
Panel fixture
Flat LED panel fixture for suspended ceilings.
Panel heat dissipation
Thermal dissipation of the LED panel through the back.
Panel LED driver
LED driver for modular suspended ceiling panels.
Panel light efficiency
Luminous efficacy of the complete LED panel including edge-lighting and diffuser.
Panel mount connector
Panel-mounted connector for power or signal interface.
Panel mount LED indicator
Panel-mounted LED indicator for signaling.
Panel mount sensor
Sensor mounted in the LED panel for automatic control.
Panel size
Dimension of the LED panel: 300x300, 600x600, 300x1200 mm standard.
Panel suspension kit
Suspension kit for LED panels from the ceiling.
Panel thickness
Thickness of the LED panel; typically 9-12 mm for slim.
Panel uniformity
Luminous uniformity on the surface of the LED panel.
Panic button
Emergency button activating complete LED lighting.
Panic lighting
Anti-panic emergency LED lighting for large spaces.
Pannello LED
Flat fixture with LEDs distributed on a surface for uniform ceiling or wall lighting.
Pannello luminoso LED
Panel backlit with LED strip for signage and decoration.
Pannello smart a parete
Wall-mounted touch panel for controlling smart LED lighting.
Pannello solare per LED
Photovoltaic panel for powering off-grid LED systems.
Panoramic LED strip
LED strip with a very wide emission angle (>160 degrees).
Parabolic diffuser
Diffuser with a parabolic section for controlled distribution.
Parabolic louvre
Parabolic anti-glare grid for LED fixtures.
Parabolic reflector
Parabolic reflector for concentrating the LED beam.
Parallel circuit
Circuit where LED strips share the same voltage.
Parallel connection diagram
Diagram of parallel connection of multiple LED strips.
Parallel driver
Configuration with multiple LED drivers in parallel for greater power.
Parallel feed
Parallel powering of multiple LED strips from the same power supply.
Parallel power supply
LED power supplies in parallel for redundancy or greater power.
Parallel strip layout
Arrangement of parallel LED strips for lighting large surfaces.
Parallelismo (strip)
Alignment of two side-by-side strips; for uniform backlighting.
Paralume (shade)
Decorative shade modifying the distribution and aesthetics of LED light.
Parameter download
Download of configuration parameters to the LED driver.
Parameter setting
Setting of the operating parameters of the LED driver (current, dimming, protections).
Parameter setting guide
Guide to setting the parameters of the LED driver.
Parameter upload
Upload of parameters from the LED driver to the configuration software.
Parametri del driver LED
Specifications: voltage, current, power, efficiency, dimming, IP, PF.
Parametri del profilo LED
Specifications: dimensions, material, finish, weight, strip compatibility.
Parametri del progetto LED
Technical specifications to be met in the design of the LED installation.
Parametri della strip LED
Technical specifications: CCT, CRI, W/m, lm/m, LED/m, IP, Vf, width.
Parametri elettrici strip LED
Voltage, current, and power of the LED strip.
Parametri fotometrici strip LED
Flux, CRI, CCT, and emission angle of the LED strip.
Parametri meccanici profilo LED
Dimensions, weight, and strength of the LED profile.
Parametri termici strip LED
Operating temperature and dissipation of the LED strip.
Parametric control
LED control based on numerical parameters (CCT, CRI, lux) rather than per fixture.
Parathom
Line of LED retrofit lamps by Osram/Ledvance for replacing traditional lamps.
Parete attrezzata LED
Wall unit with integrated LED lighting for the living room.
Parete divisoria LED
Partition panel with integrated LED strip for light and separation.
Parete luminosa LED
Large luminous surface illuminated with LED strips for a scenic effect.
Parete retroilluminata LED
Wall with rear LED strip for a decorative luminous effect.
Parking application
LED lighting for parking lots; high uniformity and presence sensors.
Parking area LED
LED lighting for parking areas; uniformity and sensors.
Parking deck LED
LED lighting for covered parking floors.
Parking garage LED
LED lighting for garages and covered parking.
Parking garage sensor
Presence sensor for controlling LED lighting in parking lots.
Parking lot LED layout
LED lighting layout for surface parking lots.
Parking structure LED
LED lighting for multi-story parking structures.
Parrucchiere LED
LED lighting for hair salons; high CRI for colors.
Partial load operation
Operation of the LED power supply at partial load; efficiency to be verified.
Partial on mode
Mode in which only part of the LEDs of the fixture are on.
Partner commerciale LED
Company collaborating for the supply of LED products.
Partner tecnico LED
Company collaborating for technical support on LEDs.
Partnership con produttori LED
Commercial collaboration with LED component manufacturers.
Passacavo
Rubber or silicone element sealing the cable entry point in the profile or power supply.
Passacavo IP
Cable gland with gasket to maintain the ingress protection rating.
Passage light LED
LED lighting for passageways and corridors.
Passaggio cavi nel profilo
Internal channel in the LED profile for orderly cable routing.
Passerella LED
LED lighting for walkways and elevated passages.
Passione per la luce LED
Dedication of the manufacturer and designer to the quality of LED lighting.
Passive component
Passive component in the LED circuit: resistor, capacitor, inductor.
Passive house lighting
LED lighting for passive buildings; very low energy consumption.
Passive house standard
Passive house standard where LED lighting contributes to efficiency.
Passive infrared (PIR)
Passive infrared sensor for motion detection.
Passive sensor
Sensor detecting without emitting signals; e.g., PIR for LEDs.
Passo di taglio strip 100mm
LED strip cuttable every 100 mm; for 24V high density.
Passo di taglio strip 200mm
LED strip cuttable every 200 mm; for 48V.
Passo di taglio strip 25mm
LED strip cuttable every 25 mm; for 12V low density.
Passo di taglio strip 33mm
LED strip cuttable every 33 mm.
Passo di taglio strip 50mm
LED strip cuttable every 50 mm; for standard 24V.
Pasta disossidante
Flux paste facilitating soldering of LED strip contacts.
Pasta termica
Thermally conductive compound applied between the LED strip and the profile to improve heat transfer.
Pasticceria LED
LED lighting for pastry shops; warm CCT and food lighting.
Patch panel
Connection panel for organizing cables in complex LED installations.
Patent protection
Patent protection on innovative LED technologies.
Path light LED
LED fixture for lighting paths and pedestrian walkways.
Pathway bollard LED
LED bollard for path marking in gardens and pedestrian areas.
Pathway lighting
LED lighting for pedestrian paths and corridors.
Patient room LED
LED lighting for hospital wards; dimmable and circadian.
Patio LED
LED lighting for patios and terraces; IP65 and warm CCT.
Pattern (effetto)
Dynamic light pattern created by the controller on addressable LED strips.
Pattern control
Control of the light pattern on addressable LED strips.
Pattern generator
Generator of light patterns for addressable LED strips.
Pattern library
Library of preset effects and patterns in the LED controller.
Pattern programming
Programming of custom light patterns on LED strips.
Pattern repeat
Repetition of a light pattern along the addressable LED strip.
Pattern speed control
Adjustment of the speed of the LED light pattern.
Pause mode
Mode in which the dynamic LED effect stops maintaining the current state.
Pavilion lighting
LED lighting for pavilions and gazebos.
Pay-back period LED
Payback period of the investment in LED lighting.
Pay-per-lux
Business model where payment is for the LED lighting service, not the fixture.
Payload (dati)
Information content of a data packet in LED protocols (DMX, Art-Net).
Payload capacity
Payload capacity of a support for LED fixtures.
PBT (polibutilene tereftalato)
Thermoplastic polymer used for connectors and LED components.
PCB (Printed Circuit Board)
Printed circuit board; the base on which LEDs and electronic components of the strip are mounted.
PCB alluminio
Printed circuit board on a metallic aluminum substrate for superior thermal dissipation; used in rigid LED bars.
PCB assembly
Assembly of components on the LED strip PCB.
PCB assembly line
Automated assembly line for the production of LED strips.
PCB bianco
LED strip with a white printed circuit board; neutral aesthetics visible through clear diffusers.
PCB ceramico
Ceramic substrate for very high thermal dissipation; extreme power LEDs.
PCB cleaning
Cleaning of the PCB after soldering to remove flux residues.
PCB coating
Protective coating of the LED strip PCB: conformal coating.
PCB connector
Connector mounted on the LED strip PCB.
PCB copper weight
Copper weight per unit area of the LED PCB: 1 oz, 2 oz, 3 oz.
PCB defect
PCB defect of the LED strip detected during quality control.
PCB design
Design of the printed circuit board of the LED strip.
PCB drilling
Drilling of the PCB for connections and component mounting.
PCB etching
Etching of the PCB to create the conductive tracks of the LED strip.
PCB fabrication
Fabrication of the printed circuit board for LED strips.
PCB flessibile
See "FPCB". Flexible printed circuit on a polymer substrate for curved LED strips.
PCB flex radius
Bending radius of the flexible PCB of the LED strip.
PCB FR4
Fiberglass and epoxy substrate; for rigid PCBs of controllers.
PCB ground plane
Ground plane of the LED strip PCB for electrical stability and EMI.
PCB inspection
Visual or automatic inspection of the PCB for quality control.
PCB land pattern
Pattern of soldering pads on the LED strip PCB.
PCB layout
Arrangement of tracks and components on the LED strip PCB.
PCB manufacturing
Manufacturing process of the PCB for LED strips.
PCB material
Base material of the PCB: polyimide, FR4, aluminum, ceramic.
PCB nero
LED strip with a black printed circuit board; reduces internal reflections and improves contrast in visible applications.
PCB pad size
Size of the soldering pads on the LED strip.
PCB panel size
Size of the PCB panel for mass production of LED strips.
PCB panelization
Arrangement of multiple LED strips on a PCB panel for efficient production.
PCB prototyping
Prototyping of the PCB for the development of new LED strips.
PCB quality control
Quality control of the LED strip PCB: optical inspection and electrical test.
PCB repair
Repair of the LED strip PCB for replacement of defective components.
PCB routing
Routing of traces on the LED strip PCB.
PCB solder mask color
Color of the solder mask of the LED PCB: green, white, black.
PCB spessore rame (1oz, 2oz, 3oz)
Amount of copper per unit area; more copper = lower resistance.
PCB stackup
Composition of the layers of the multilayer LED PCB.
PCB stiffener
Rigid reinforcement applied to the flexible PCB for connection areas.
PCB substrate material
Material of the PCB substrate: polyimide, FR4, aluminum, ceramic.
PCB surface finish
Surface finish of the LED PCB: HASL, ENIG, OSP.
PCB test
Electrical and optical test of the LED strip PCB in production.
PCB thickness
Thickness of the LED strip PCB; typically 0.12-0.20 mm for FPCB.
PCB trace
Copper conductive track on the LED strip PCB.
PCB trace width
Width of the copper tracks on the PCB; greater = lower resistance.
PCB via
Plated through-hole in the PCB for connection between layers.
Peak current
Maximum peak current tolerable by the LED for short pulses.
Peak lumen output
Maximum luminous flux emitted by the LED strip at full power.
Peak wavelength
Wavelength at which the LED emits maximum radiant power.
Pedestal mount
Pedestal mounting for outdoor LED fixtures.
PEEK (polimero)
High-performance polymer for LED components in extreme environments.
Peel force
Force required to peel the double-sided tape from the LED strip; indicates adhesion quality.
Peel strength
Peel strength of the double-sided tape of the LED strip from the surface.
Pelacavi
Tool for precise stripping of LED power cables.
Pellicola protettiva profilo
Removable film applied at the factory to protect the LED profile during transport.
PELV (Protective Extra Low Voltage)
Protective extra-low voltage with grounding; alternative to SELV for LED installations.
Pendant cable
Suspension cable for pendant LED profiles.
Pendant height
Suspension height of a pendant LED profile.
Pendant light
LED fixture suspended from the ceiling via cable or rod.
Pendant mount kit
Complete kit for suspending LED profiles from the ceiling.
Pendente LED
LED profile or fixture suspended from the ceiling via cables or rods; direct and/or indirect light.
Pendente LED per cucina
Suspended LED fixture above the table or island of the kitchen.
Pendente LED per ufficio
Suspended LED profile for direct-indirect lighting in offices.
Penetration depth
Depth to which LED light penetrates a translucent material.
Pennarello indelebile
Permanent marker for marking cut and mounting points of the LED profile.
Pensilina LED
LED lighting for canopies and bus shelters.
Penthouse lighting
LED lighting for penthouses and attic spaces; slim profiles and warm CCT.
Percent flicker
Percentage measure of peak-to-peak brightness variation relative to the average; lower is better.
Percentuale di dimmerazione
Current LED brightness level expressed as a percentage of maximum.
Percorso dei cavi LED
Routing of power and signal cables in the LED installation.
Percorso luminoso LED
LED light line guiding movement along a corridor or path.
Perdita di efficienza LED
Reduction of LED system efficiency due to temperature or aging.
Perdita nel diffusore
Reduction of luminous flux through the diffuser; opal ~30%.
Perdita nel driver
Power dissipated as heat by the LED power supply; efficiency loss.
Perforated panel
Perforated panel for ventilation and LED light distribution.
Performance data
Measured performance data of an LED strip: flux, CRI, CCT, power.
Performance LED garantita
Performance of the LED product guaranteed by the manufacturer.
Pergolato LED
LED lighting for pergolas; IP65 and warm CCT.
Perimeter lighting
Perimeter LED lighting of an environment or piece of furniture.
Periodo di ammortamento LED
Time required to recover the LED investment through savings.
Permanent installation
Fixed and permanent LED installation; not temporary.
Permanent magnet mount
Fixing with permanent magnets for quick installation on metal surfaces.
Permit (autorizzazione)
Permission required for LED installations in historic or regulated buildings.
Personal lighting
Individual LED lighting controlled by the single user.
Personalizzazione del prodotto LED
Adaptation of LED strips, profiles, and systems to specific needs.
Personalizzazione della CCT
Choice of the specific color temperature for the LED strip of the project.
Personalizzazione della finitura
Choice of color and surface treatment of the LED profile.
Personalizzazione della lunghezza
Cutting of the LED strip and profile to the exact required length.
Personalizzazione della potenza
Choice of the power per meter of the LED strip based on the application.
Peso del profilo LED
Mass per linear meter of the LED profile; for structural calculation.
PET (film)
Polyethylene terephthalate film for LED insulation and protection.
PET film
Polyethylene terephthalate film used as insulator in LED strips.
PF correction
Power factor correction in the LED power supply.
PFC attivo
Active power factor correction with boost circuit in the LED driver.
PFC passivo
Passive power factor correction with filter in the LED driver.
Pharmaceutical application
LED lighting for pharmaceutical labs and production; GMP compliant.
Pharos Designer
Software for professional control of architectural LED installations.
Phase angle
Phase angle of the AC signal cut by the TRIAC dimmer.
Phase angle dimming
Dimming by varying the phase angle of the AC signal.
Phase-cut dimming
See Phase-cut dimmer. Dimming by interrupting the AC wave.
Phosphor aging
Aging of the phosphor in the LED causing chromatic shift over time.
Phosphor coating
Phosphor coating applied to the LED die for conversion to white light.
Phosphor conversion
See "Photon conversion". Process by which the phosphor converts the blue light of the LED chip to white.
Photo sensor
Light sensor for automatic control of LED brightness.
Photobiological risk group
Classification of the photobiological hazard of the LED source.
Photobiological safety
Photobiological safety; assessment of the risk from exposure to LED light (standard EN 62471).
Photocatalytic LED
LED activating photocatalytic processes for air purification.
Photocell
Photoelectric cell for automatic switching on of LEDs at dusk.
Photoelectric sensor
Photoelectric sensor for object detection in the LED field.
Photoluminescence
Emission of light from a material stimulated by photons; principle of the LED phosphor.
Photometric data
Measured data on the light distribution of an LED fixture.
Photometric file
Data file (.ies, .ldt) with the light distribution of the LED fixture.
Photometric report
Document with the results of photometric measurements of an LED fixture.
Photometric testing
Laboratory measurement of the photometric performance of an LED fixture.
Photometry
Science of the measurement of visible light.
Photon
Quantum of light emitted by the LED chip during electron-hole recombination.
Photon flux
Flux of photons emitted by the LED source; relevant for grow lighting.
Photon energy
Energy of the photon emitted by the LED; E = hf where h is Planck's constant.
Photon recycling
Technique for recovering photons lost internally in the LED chip.
Photopic lumen
Lumens weighted on the photopic sensitivity curve of the human eye.
Photopic vision
Daylight vision; the V(λ) curve describes its sensitivity.
PhotoView
Software for viewing renderings of LED lighting projects.
Photovoltaic panel (per LED)
Solar panel powering off-grid LED systems.
Physical vapor deposition
Deposition technique for reflective coatings on LED profiles.
Phytochrome
Receptor in plants sensitive to red and infrared light; relevant for grow LEDs.
Pianificazione dell'installazione LED
Organization of the mounting phases of the LED installation.
Pianificazione settimanale LED
Programming of LED scenes for each day of the week.
Piano di illuminazione LED
Document with the arrangement and specifications of all LED light points.
Piano di lavoro (h=0.85 m)
Standard height of the work plane for LED illuminance calculation.
Piano di lavoro illuminotecnico
Reference surface for LED illuminance calculation.
Piano di manutenzione LED
Program of periodic maintenance operations for the LED installation.
Piano illuminotecnico LED
Design document with the layout and specifications of the LED installation.
Piano utile
Surface on which LED illuminance is calculated; typically at 0.85 m.
Piastra di connessione LED
Terminal block for distributing power to multiple LED strips.
Piastra di giunzione interna
Internal metal plate for connecting two sections of LED profile.
Piattaforma cloud LED
Cloud service for remote management of the smart LED installation.
Piazza LED
LED lighting for urban squares; luminous street furniture.
Piazzamento degli alimentatori
Positioning of LED drivers in the installation for accessibility.
Piazzamento dei profili LED
Positioning of LED profiles according to the lighting design project.
Piazzamento dei sensori LED
Positioning of sensors for optimal coverage of the LED area.
Picco di emissione LED
Wavelength at which the LED emits maximum power.
Pickup coil
Detection coil for measuring current in LED circuits.
Piedistallo LED
LED lighting column for gardens and pathways.
Piega della strip LED
Bending of the flexible strip to adapt to curves and angles.
Pier light
LED fixture on a pillar for lighting gates and entrances.
Pig tail
Short cable with pre-installed connector for quick connection.
Pigtail cable
Cable with a connector on one side; for connecting LED strips.
Pilastro illuminato LED
Column with integrated LED strip for architectural lighting.
Pilot indicator
LED indicator showing the operating status of the system.
Pilot light
LED indicator light showing the status of a device.
Pin configuration
Arrangement of pins in an LED connector: polarity and function.
Pin connector
Pin connector for LED strips; available in 2-6 pin versions.
Pinhole LED
LED fixture with a very small aperture for a concentrated beam.
Pinout
Arrangement and function of pins of an LED connector.
Pinza a becchi lunghi
Precision pliers for work on LED connectors and strips.
Pinza amperometrica
Instrument for measuring current in the LED circuit without cutting the cable.
Pinza crimpatura
Crimping pliers for connectors on LED cables.
Pinza spellafili
Stripping pliers for precise stripping of LED cables.
Pinza universale
Universal pliers for general work on the LED installation.
Pipe mount
Mounting of LED fixtures on pipes or cylindrical poles.
Piscina coperta LED
LED lighting for indoor pools; IP65 and chlorine resistance.
Pistola per silicone
Silicone gun for applying sealing silicone on LED strips and profiles.
Pitch (passo)
Distance between the centers of two consecutive LEDs on the strip; influences uniformity.
Pixel art (LED)
Artistic installation with addressable LEDs forming images or animations.
Pixel controller
Controller dedicated to managing addressable LED strips pixel by pixel.
Pixel density
Number of addressable LEDs per meter; higher = higher resolution.
Pixel depth
Color resolution per LED pixel; 8 bit = 256 levels per channel.
Pixel LED
Single addressable LED in a strip; corresponds to a pixel of light.
Pixel mapping
Technique mapping video content onto addressable LED matrices or strips.
Pixel pitch
Distance between the centers of two adjacent LEDs; in high-density strips it is very small (< 5 mm).
Pixel pitch (strip)
Distance between the centers of two consecutive addressable LEDs.
Placca dimmer LED
Decorative faceplate for the wall-mounted LED dimmer.
Plafon mount
Ceiling mounting of flat LED fixtures like ceiling lights.
Plafone LED
Flat and compact ceiling-mounted LED fixture for general room lighting.
Plafoniera LED
Flat LED ceiling fixture for general lighting.
Plafoniera LED per bagno
IP44 LED ceiling fixture for bathroom lighting.
Plafoniera LED per cucina
LED ceiling fixture for general kitchen lighting.
Plafoniera LED per soggiorno
Dimmable LED ceiling fixture for the living room.
Plan view
Plan view of the LED lighting design project.
Planar LED
LED with emission on a flat surface; typical of COB.
Planckiana (curva)
Curve in the CIE diagram representing the colors emitted by a black body at different temperatures; reference for CCT.
Planning software
Software for designing and simulating LED installations.
Plant growth LED
LED with spectrum optimized for indoor plant growth.
Plaster-in profile
LED profile designed to be plastered into drywall; invisible.
Plastic housing
Plastic enclosure for LED power supplies and controllers.
Plastic optic
Plastic optics (PMMA, PC) for LED fixtures.
Plate diffuser
Flat diffuser for slim LED profiles.
Platform lighting
LED lighting for railway platforms and stations.
Plenum cable
Cable certified for installation in plenum spaces between ceilings.
Plenum rated
LED cable or fixture certified for installation in plenum spaces.
Plinth lighting
LED lighting of the base of furniture and kitchens.
Plug adapter
Adapter for different types of LED power supply plugs.
Plug and play
LED system working immediately after connection without configuration.
Plug-in driver
LED power supply with integrated plug for direct connection to the socket.
Plug-in module
Plug-in LED module for easy replacement.
Plunge cut
Plunge cut in drywall to create the seat for the recessed LED profile.
PMT (Photomultiplier tube)
Photomultiplier tube for laboratory LED measurements.
PNP driver
Driver circuit with PNP transistor for LEDs.
PoE (Power over Ethernet)
Technology providing power and data over a single Ethernet cable; used in smart LED systems.
POE injector
Device injecting power onto the Ethernet cable for PoE LEDs.
Point of sale LED
LED lighting for point-of-sale and display corners.
Point source
Light source concentrated in a point; a single LED is approximately so.
Polarità della strip LED
Orientation of the + and - terminals of the LED strip; to be respected.
Polarity
Orientation of the + and - terminals in LED strips; to be respected in connection.
Polarity protection
Circuit protecting the LED strip from polarity reversal.
Polarizzazione (elettrica)
Application of voltage to the LED junction to allow current flow.
Pole mount
Mounting of LED fixtures on a pole.
Poliammide (PA)
Thermoplastic polymer for mechanical components of LED systems.
Policarbonato (PC)
Impact-resistant polymer used for LED profile diffusers; less transparent than PMMA but more robust.
Polietilene (PE)
Polymer for sheaths and insulation of LED cables.
Poliimmide
Heat-resistant polymer used as a flexible substrate in printed circuits of LED strips.
Poliimmide (PI)
Heat-resistant polymer for the flexible substrate of LED strips.
Polipropilene (PP)
Polymer for LED containers and accessories.
Polished aluminum
Mirror-polished aluminum for internal reflectors of LED profiles.
Polished finish
Glossy finish on LED profiles for maximum reflection.
Polishing (ottica)
Polishing of LED lenses and diffusers for maximum transparency.
Polistirene (PS)
Transparent polymer for economical LED diffusers.
Politica dei resi LED
Conditions for the return of non-conforming LED products.
Poliuretano (PU)
Polymer for IP sealing resins and LED cable sheaths.
Pollution degree
Environmental pollution degree influencing insulation distances in the LED driver.
Polyester film
Polyester film used as insulator or reflector in LED fixtures.
Polymer LED
Polymer-based LED; variant of OLED.
POM (acetale)
Engineering polymer for gears and mechanisms of adjustable LED fixtures.
Ponte di Graetz
4-diode rectifier bridge for AC-DC conversion in the LED driver.
Ponte di luce LED
Luminous LED structure connecting two architectural elements.
Ponte LED
LED lighting for bridges and viaducts.
Ponte raddrizzatore
Circuit converting alternating current (AC) to direct current (DC) inside the LED power supply.
Pool application
IP68 underwater LED lighting for pools and fountains.
Pool LED
Underwater LED lighting for swimming pools; IP68 and chlorine resistance.
Pop-in (diffusore)
Push-in insertion system of the diffuser into the LED profile; quick mounting without tools.
Pop-in diffuser
Diffuser that snaps into the LED profile.
Pop-up LED
Retractable LED fixture emerging from the surface when activated.
Portable controller
Portable LED controller for testing and demonstration.
Portable LED light
Battery-powered portable LED light.
Portata del telecomando LED
Maximum operating distance of the remote control for the LED controller.
Portatore di carica
Electrons and holes flowing in the semiconductor LED.
Portfolio progetti LED
Collection of realized LED projects as references of the manufacturer.
Portico LED
LED lighting for porticoes and loggias.
Posa del profilo LED
Physical mounting of the LED profile on the surface.
Posa della strip nel profilo
Application of the LED strip in the seat of the aluminum profile.
Posa in opera LED
Physical installation of LED components on the construction site.
Position sensor
Sensor detecting position for activating LEDs at specific points.
Positive lead
Positive conductor (+) in the power cable of the LED strip.
Positive temperature coefficient
Characteristic of PTC fuses increasing resistance with temperature.
Posizionamento della strip LED
Placement of the strip in the profile for optimal light distribution.
Posizione del punto di taglio
Location of the cut mark on the LED strip.
Post cap LED
LED light for the top of pillars and posts.
Post-installation test
Functional test of the LED installation after completion.
Pot life
Working time of two-component resins and adhesives for LEDs.
Pot light
North American term for recessed LED downlight.
Potentiometer
Variable resistor for analog adjustment of LED brightness.
Potenza (Watt, W)
Unit of measurement of electrical power; in LED strips expressed in W/m.
Potenza al metro strip 14.4W
14.4 W/m LED strip for general lighting.
Potenza al metro strip 19.2W
19.2 W/m LED strip for task lighting.
Potenza al metro strip 24W
24 W/m LED strip for high-power lighting.
Potenza al metro strip 4.8W
4.8 W/m LED strip for decorative lighting.
Potenza al metro strip 9.6W
9.6 W/m LED strip for ambient lighting.
Potenza al metro strip LED
Consumption of the LED strip per linear meter; in Watts per meter.
Potenza assorbita strip
Actual electrical consumption of the LED strip; in Watts per meter.
Potenza dell'alimentatore
Power capacity in Watts of the LED power supply; must exceed the load by 20%.
Potenza dell'impianto LED
Total power absorbed by all LED components of the installation.
Potenza installata per metro quadrato
LED power density in the environment; in W/m2.
Potenza necessaria impianto LED
Total power required by the LED installation; for electrical sizing.
Potenza nominale strip
Power declared by the manufacturer for the LED strip; in W/m.
Potenza ottica
Radiant power emitted by the LED in the optical region.
Potenza per metro (W/m)
Electrical power absorbed per linear meter of LED strip; fundamental parameter for sizing the power supply.
Potenza reattiva (VAR)
Power that does not do useful work; from power supplies with low PF.
Potenza totale impianto LED
Sum of the power of all LED components of the installation.
Potere risolutivo (ottica)
Capacity of the LED optics to separate fine details.
Potting
Filling with resin of the LED power supply enclosure for protection.
Potting compound
Filling resin for IP protection of the LED power supply.
Potting resin
Two-component resin for sealing LED components.
Power bus
Power distribution line in a multi-strip LED system.
Power cable
Main power cable of the LED installation.
Power cable AWG
Gauge of the LED power cable according to the AWG scale.
Power chain
Power supply chain from the mains to the LED strip through the power supply.
Power connector
Power connector for LED strips and drivers.
Power consumption
Total electrical consumption of the LED installation including losses.
Power coupling
Electrical coupling between the power supply and the LED load.
Power density
Power density per unit area; W/m2 on the LED strip.
Power derating
Reduction of the nominal power of the LED power supply for high ambient temperature.
Power distribution
Distribution of electrical power to various points of the LED system.
Power entry module
Integrated module with socket, fuse, and switch for LED power supplies.
Power factor correction (PFC)
Circuit in the power supply improving the power factor.
Power feed connector
Power connector for electrified LED tracks.
Power indicator
LED indicator showing the presence of power.
Power injection
Power injection at multiple points along the LED strip to compensate for voltage drop over long runs.
Power line communication (PLC)
Communication via the existing power line for LED control.
Power meter
Instrument for measuring the power absorbed by the LED installation.
Power monitoring
Continuous monitoring of the energy consumption of the LED installation.
Power over Ethernet injector
Device adding power to the Ethernet cable for PoE LEDs.
Power quality
Quality of the electrical supply; affects the operation of LED drivers.
Power rail
Power rail integrated into an LED profile.
Power redundancy
Redundant power supply with multiple LED drivers for service continuity.
Power regulation
Stabilization of voltage or current in the LED power supply.
Power sequencing
Sequential power-up of LED power supplies to limit total inrush current.
Power splitter
Distributor dividing the power from one driver to multiple LED strips.
Power strip (ciabatta)
Power strip with protection for LED laboratory power supplies.
Power supply unit (PSU)
See Power supply. Power supply unit for LED systems.
Power transformer
Power transformer for powering LED installations.
PPA (Poliftalammide)
Heat-resistant polymer used in the package of SMD LED chips for stability at high temperatures.
Pre-assembled kit
Pre-assembled LED kit ready for quick installation.
Pre-configured driver
LED driver with parameters already set at the factory.
Pre-cut strip
LED strip pre-cut to the length specified by the customer.
Pre-wired
LED component with cables already connected and ready for installation.
Pre-wired connector
Connector with cables already attached ready for installation.
Precision dimming
High-resolution dimming for fine adjustments of brightness.
Prelievo dal magazzino LED
Operation of picking LED components from the warehouse for installation.
Premium efficiency
LED driver with efficiency above 95%.
Preparazione del cantiere LED
Preliminary activities before the installation of the LED installation.
Preparazione della superficie
Cleaning and degreasing of the surface before mounting the LED strip.
Press fit
Press-fit insertion of components into the LED profile without tools.
Pressure equalizer
Membrane equalizing the internal pressure of sealed LED fixtures.
Pressure test
Pressure test to verify the IP seal of LED fixtures.
Prestazioni del sistema LED
Set of luminous and electrical parameters of the LED installation.
Prestazioni della strip LED
Parameters of flux, efficiency, and color rendering of the LED strip.
Preventivo dettagliato LED
Analytical cost estimate item by item of the LED installation.
Preventivo gratuito LED
No-cost offer for the customer for the LED supply.
Preventivo LED
Cost estimate for the supply and installation of the LED installation.
Preventivo per impianto LED
Cost estimate for the realization of the LED installation.
Prezzo al metro profilo
Cost of the LED profile expressed per linear meter.
Prezzo al metro strip
Cost of the LED strip expressed per linear meter.
Prezzo al pezzo LED
Unit cost of a single LED component.
Prezzo competitivo LED
Advantageous quality-price ratio of LED products.
Prezzo di listino LED
Official price of the LED product published by the manufacturer.
Prezzo per metro LED
Cost of the LED strip expressed per linear meter.
Prima accensione LED
Initial test of the LED installation after installation to verify operation.
Primary lens
Primary lens integrated into the LED package for initial beam distribution.
Primary optic
Lens integrated into the LED package forming the base distribution.
Primo avviamento LED
First power-on of the LED installation after completion.
Print head LED
UV LED for curing ink in industrial printers.
Printed circuit board
See PCB. Base for the electronic components of the LED strip.
Prismatic lens
Lens with a prismatic surface for controlled LED distribution.
Privacy lighting
LED lighting designed not to disturb neighbors' privacy.
Procedura di installazione LED
Operational sequence for mounting the LED installation.
Process control
Control of the production process of LED strips for constant quality.
Prodotto LED certificato
LED item with all necessary conformity certifications.
Prodotto LED di catalogo
Standard LED item available in the catalog for immediate order.
Prodotto LED di qualità
LED item with professional-level performance and reliability.
Prodotto LED disponibile
LED item in stock for quick delivery.
Prodotto LED su ordinazione
Custom LED item produced on customer request.
Prodotto personalizzato LED
LED item made to the customer's specifications.
Product certification
Conformity certification of the LED product to current standards.
Product data sheet
Complete technical datasheet of the LED product with all parameters.
Product family
Family of LED products with common characteristics but variations in power, CCT, IP.
Product lifetime
Declared useful life of the LED product; typically 50,000-100,000 hours.
Product traceability
Traceability of the LED product from the chip batch to the finished product.
Production line
Automated production line for LED strips.
Produttore LED
Company manufacturing LED chips, strips, profiles, or fixtures.
Produzione in serie LED
Manufacturing of large quantities of standardized LED products.
Profile adapter
Adapter for connecting accessories of one model to a different LED profile.
Profile aesthetic appearance
Visual impact of an LED profile in a space when powered off and on.
Profile bend
Bending of the aluminum LED profile to follow architectural shapes.
Profile bracket
Specific bracket for mounting an LED profile.
Profile cap
End cap of the LED profile.
Profile channel width
Internal width of the profile channel for housing the LED strip.
Profile connector
Element connecting two sections of LED profile in continuity.
Profile cross-section
Transverse section of the LED profile; defines its shape and dimensions.
Profile cutter
Tool for precise cutting of aluminum LED profiles.
Profile extension
Extension of the LED profile to reach the desired length.
Profile finish
Surface finish of the profile: anodized, painted, brushed, RAL.
Profile height
Total height of the LED profile; determining factor for recessing.
Profile inner width
Internal useful width of the profile for housing the LED strip.
Profile joiner
Accessory for joining two sections of LED profile in continuity.
Profile length
Standard length of the LED profile (typically 1, 2, or 3 meters).
Profile mounting clip
Specific clip for fixing the LED profile to the surface.
Profile section
Transverse section of the LED profile; defines dimensions and shape.
Profile wall thickness
Thickness of the walls of the aluminum LED profile.
Profile weight
Weight per meter of the LED profile; for structural calculation of supports.
Profile width
Total external width of the LED profile.
Profilo a C
LED profile with a C-section for side mounting on surfaces.
Profilo a H
LED profile with an H-section for double light emission.
Profilo a incasso
LED profile that fits into a recess in the surface, flush or below the plane.
Profilo a incasso per cartongesso
LED profile for installation in drywall suspended ceilings.
Profilo a incasso per legno
LED profile for installation in a recess in wood.
Profilo a incasso per soffitto
LED profile for recessed installation in the ceiling.
Profilo a L
LED profile with an L-section for corners and edges.
Profilo a omega
LED profile with an omega section for DIN rail mounting.
Profilo a parete
LED profile designed for vertical surface mounting; may include a fixing wing.
Profilo a pavimento
Walkable LED profile with reinforced diffuser, for floor installation.
Profilo a scomparsa
LED profile completely hidden in the surface; invisible.
Profilo a sospensione
LED profile with a suspension kit of steel cables; pendant linear lighting.
Profilo a sospensione LED
LED profile suspended from the ceiling with cables for pendant lighting.
Profilo a T
LED profile with a T-section for integration in suspended ceilings.
Profilo a taglio di luce
LED profile creating a light slot in the ceiling or wall.
Profilo a tutta lunghezza
LED profile covering the entire length of the wall or ceiling.
Profilo a U
LED profile with a standard U-section for strip and diffuser.
Profilo a V
LED profile with a V-section for 90-degree angled installations.
Profilo a vista (surface)
LED profile to be applied directly to the surface without recess.
Profilo a vista LED
LED profile applied to the surface without recess.
Profilo angolare
LED profile with a V or L section, designed for installation in angles between walls, shelves, or furniture.
Profilo angolare LED 45 gradi
LED profile with a 45-degree V-section for internal angles.
Profilo angolare LED 90 gradi
LED profile with an L-section for 90-degree angles.
Profilo asimmetrico
Profile with a non-symmetrical section for directional emission.
Profilo bifacciale
LED profile with luminous emission on two opposite sides.
Profilo calpestabile
Reinforced LED profile with tempered glass or high-strength polycarbonate diffuser for walkable areas.
Profilo circolare
LED profile with a round section creating a cylindrical luminous effect; used as a pendant or decorative element.
Profilo con aletta
LED profile with a side flange for mechanical fixing.
Profilo con guida diffusore
LED profile with a groove for sliding insertion of the diffuser.
Profilo con passaggio cavi
LED profile with an internal channel for orderly cable routing.
Profilo con riflettore
LED profile with an internal reflector for controlled light distribution.
Profilo con sensore integrato
LED profile with integrated proximity or motion sensor.
Profilo continuo
System of connectable LED profiles for uninterrupted light lines.
Profilo curvo a raggio fisso
LED profile pre-bent with a fixed radius defined in production.
Profilo curvo a raggio variabile
Flexible LED profile adapting to different bending radii.
Profilo da cartongesso
LED profile specifically for invisible integration in drywall ceilings and walls.
Profilo da cartongesso con stucco
LED profile for recess in drywall with plaster finish.
Profilo da controsoffitto Armstrong
LED profile specifically for the 600x600 mm Armstrong grid.
Profilo da cornice
LED profile shaped as an architectural frame for perimeter lighting.
Profilo da corrimano
LED profile integrated into the handrail of stairs and balustrades.
Profilo da cucina LED
LED profile for under-cabinet and task lighting in the kitchen.
Profilo da esterno IP65
LED profile with IP65 protection for covered outdoor installations.
Profilo da esterno IP67
LED profile with IP67 protection for exposed outdoor installations.
Profilo da esterno LED IP65
LED profile for outdoor installations with IP65 protection.
Profilo da gradino
LED profile for lighting stairs and steps; improves safety and aesthetics.
Profilo da gradino antiscivolo
LED profile for steps with integrated anti-slip surface.
Profilo da guardaroba
Slim LED profile for interior lighting of wardrobes and cabinets.
Profilo da mensola
LED profile for mounting under shelves and racks.
Profilo da mobile
Miniaturized LED profile for integration into furniture and furnishings.
Profilo da parapetto
LED profile for integration into parapets and railings.
Profilo da soffitto teso
LED profile specifically for integration with stretched PVC ceilings.
Profilo da specchiera
Perimeter LED profile designed for lighting bathroom or vanity mirrors.
Profilo da vetrina
LED profile for internal lighting of display windows.
Profilo da zoccolino
LED profile integrated into the baseboard for floor-level lighting.
Profilo deep (profondo)
LED profile with a higher-than-average section; allows greater distance between LED and diffuser for superior uniformity.
Profilo doppia emissione
LED profile emitting light both downwards and upwards.
Profilo extra largo
LED profile with a width greater than 30 mm for double strips.
Profilo extra slim
LED profile with a height less than 7 mm for minimal installations.
Profilo flessibile
LED profile in silicone or bendable aluminum to follow curves and non-linear shapes.
Profilo illuminazione indiretta
LED profile designed for emission towards the ceiling or wall.
Profilo LED
Extruded aluminum bar housing the LED strip and diffuser; ensures dissipation, protection, and aesthetic finish.
Profilo LED per bagno
Profile with IP protection for LED lighting of the bathroom.
Profilo LED per camera
Slim LED profile for bedroom lighting.
Profilo LED per corridoio
LED profile for continuous lighting of corridors and hallways.
Profilo LED per cucina
LED profile for under-cabinet and task lighting in the kitchen.
Profilo LED per esterno
LED profile with IP protection for outdoor installations.
Profilo LED per interno
Standard LED profile for installations in dry indoor environments.
Profilo LED per negozio
LED profile for lighting displays and shelves in retail.
Profilo LED per soggiorno
LED profile for indirect and atmospheric lighting in the living room.
Profilo LED per ufficio
Suspended or recessed LED profile for efficient office lighting.
Profilo magnetico
LED profile with magnetic mounting system for easy repositioning.
Profilo micro
LED profile with dimensions less than 10x10 mm.
Profilo modulare
Composable LED profile in connectable segments for flexible configurations.
Profilo per doppia strip
LED profile sized to house two side-by-side LED strips.
Profilo per gradino con nose
LED profile with a protruding edge for the step tread.
Profilo per neon flex
Mounting profile specifically for LED neon flex.
Profilo per scale
Specific profile for step backlighting.
Profilo per strip COB
LED profile optimized for COB strips; optimal distance from the diffuser.
Profilo per strip da 10 mm
LED profile with a standard channel for 10 mm strips.
Profilo per strip da 12 mm
LED profile with a wide channel for 12 mm strips.
Profilo per strip da 5 mm
LED profile with a narrow channel for 5 mm wide strips.
Profilo per strip da 8 mm
LED profile with a channel for 8 mm wide strips.
Profilo per vetro
LED profile with clips for fixing on glass sheets.
Profilo personalizzato
LED profile with a custom cross-section designed for the specific project.
Profilo quadrato
LED profile with a square section for geometric design.
Profilo rettangolare
LED profile with a standard rectangular section.
Profilo rotondo
LED profile with a circular section for pendants and designer installations.
Profilo senza diffusore
Open LED profile without a cover; for direct emission.
Profilo slim
LED profile with a very small section (height ≤7 mm) for ultra-flat and discreet installations.
Profilo slim LED
Ultra-thin LED profile with a height less than 10 mm.
Profilo sottopensile
LED profile designed to be mounted under cabinets and shelves; typical application in kitchens.
Profilo su misura
LED profile cut and configured to the required length and with the requested accessories.
Profilo trimless
Recessed LED profile without a visible edge; perfectly flush.
Profilo waterproof
LED profile with complete sealing for IP67/IP68 protection.
Profondità del canale profilo
Vertical dimension of the seat housing the LED strip in the profile.
Profondità del profilo LED
Vertical dimension of the profile; determines the recess depth.
Profondità di fresatura LED
Thickness of material to be removed for the seat of the recessed profile.
Profondità di incasso
Measurement of the milling thickness required to house a recessed LED profile.
Profondità minima incasso
Minimum space required above the recessed LED profile.
Progettazione dell'illuminazione LED
Study and sizing of the LED installation by the designer.
Progettista illuminotecnico
Professional designing LED lighting installations.
Progettista illuminotecnico LED
Professional specialized in the design of LED installations.
Progettista LED
Professional specialized in the design of LED installations.
Progetto chiavi in mano LED
Complete service: design, supply, installation, and testing of LEDs.
Progetto completo LED
Complete documentation of the LED project: calculations, layout, specifications.
Progetto definitivo LED
LED project with all details for installation.
Progetto di illuminazione LED
Set of study and sizing activities for the LED installation.
Progetto esecutivo LED
Final project with all details for the realization of the LED installation.
Progetto illuminotecnico preliminare
First phase of the LED project with layout and preliminary calculations.
Progetto preliminare LED
First study phase of the LED installation with layout and calculations.
Programmable scene
Lighting scene programmable by the user in the LED controller.
Programmable timer
Programmable timer for time-based automation of LED lighting.
Programmazione a scene
Storage of predefined lighting scenarios (intensity, color, zone) recallable with a command.
Programmazione degli scenari LED
Storage of combinations of brightness and color in the controller.
Programmazione oraria LED
Setting the on/off times of LED lighting.
Progress indicator LED
LED bar indicating the progress status of a process.
Proiettore LED
High-power directional fixture for outdoor lighting.
Project documentation
Complete technical documentation of the LED lighting design project.
Project specification
Detailed technical specification of LED requirements for a project.
Projection distance
Distance between the LED fixture and the illuminated surface.
Projection effect LED
Projection effect created with LEDs and masks or gobos.
Promozione prodotti LED
Commercial offer with discounts on LED products.
Promozione stagionale LED
Commercial offer linked to a specific period for LED products.
Pronta consegna LED
LED product available for immediate shipment.
Proof of concept
Demonstrative prototype of an LED system before production.
Proportional dimming
Dimming proportional to the input signal.
Proposta commerciale LED
Economic offer for the supply of the LED installation.
Proposta di risparmio LED
Document quantifying the energy savings of switching to LED.
Proposta di valore LED
Set of benefits offered by the LED product to the customer.
Protected output
Output of the LED power supply protected against short circuits and overload.
Protective coating
Protective coating applied to LED strips for IP protection.
Protective cover
Removable protective cover on unused LED connectors.
Protective earth (PE)
Protective earth conductor; mandatory for Class I fixtures.
Protezione da cortocircuito (SCP)
Safety circuit in the power supply that shuts it down in case of short circuit on the outputs.
Protezione da sovraccarico (OLP)
Protection system in the power supply that limits power in case of excessive load.
Protezione da sovratemperatura (OTP)
Protection circuit reducing or shutting down the power supply in case of excessive temperature.
Protezione IP alimentatore LED
Environmental protection rating of the LED power supply.
Protezione IP profilo LED
Environmental protection rating of the assembled LED profile.
Protezione IP strip LED
Environmental protection rating of the LED strip.
Protezione surge (SPD)
Protection against transient overvoltages of the mains.
Protocol converter
Device converting between different LED protocols (e.g., DMX to DALI).
Protocollo ArtNet 4
Version 4 of the Art-Net protocol for transporting DMX over Ethernet.
Protocollo BACnet/IP
IP version of the BACnet protocol for building automation with LEDs.
Protocollo Bluetooth 5.0
Version 5.0 of Bluetooth with improved range and speed for LEDs.
Protocollo Bluetooth Mesh 1.1
Updated version of Bluetooth Mesh for LED networks.
Protocollo DALI DT6
Device Type 6 of the DALI standard for LED drivers.
Protocollo DALI DT8
Device Type 8 of the DALI standard for LED color control.
Protocollo DMX RDM
Remote Device Management for bidirectional LED configuration.
Protocollo EnOcean
Wireless energy-harvesting protocol for battery-free LED control.
Protocollo KNX Secure
Secure version of the KNX protocol with encryption for LEDs.
Protocollo KNX/IP
IP version of the KNX protocol for LED management over Ethernet.
Protocollo Loxone Tree
Wired Loxone protocol for LED lighting control.
Protocollo Matter 1.0
Matter interoperability standard for smart home LED devices.
Protocollo MQTT LED
Use of the MQTT protocol for IoT control of LED lighting.
Protocollo Philips Hue
Proprietary Philips protocol for controlling Hue LED lamps and strips.
Protocollo sACN E1.31
ANSI E1.31 standard for streaming DMX data over Ethernet.
Protocollo Thread 1.3
Version 1.3 of the Thread protocol for mesh LED networks.
Protocollo Tuya
Tuya IoT platform for smart Wi-Fi LED controllers.
Protocollo Wi-Fi HaLow
Wi-Fi 802.11ah long-range and low-power for smart LEDs.
Protocollo Z-Wave Long Range
Long-range version of the Z-Wave protocol for LEDs.
Protocollo Zigbee Green Power
Zigbee profile for battery-free LED devices.
Prototipazione
Creation of samples and preliminary tests of an LED system before mass production.
Prova di funzionamento LED
Test of the LED installation to verify correct operation.
Proximity dimming
Automatic dimming based on the user's distance from the sensor.
Proximity switch
Proximity switch for contactless LED activation.
PTFE (teflon)
Polymer with excellent chemical and thermal resistance for special LED cables.
Puck light
Small circular LED fixture for under-cabinet lighting.
Pulizia del diffusore LED
Maintenance operation to remove dust and dirt from the diffuser.
Pull switch
Pull switch for turning on LEDs in cabinets and storage rooms.
Pulsating light
LED light with rhythmic intensity variation; for signaling.
Pulse frequency
Frequency of pulses in the PWM dimming signal.
Pulse start
Pulse start of discharge lamps; not needed for LEDs.
Punch-down connector
Insulation-piercing connector for quick wiring.
Punto di alimentazione LED
Position where the cable connects to the LED strip.
Punto di connessione LED
Position where two sections of LED strip or strip and cable connect.
Punto di forza LED
Competitive advantage of LED technology over alternatives.
Punto di taglio strip
Mark on the LED strip indicating where the circuit can be cut.
Punto luce LED
Single LED fixture or profile in the lighting installation.
Punto vendita LED
Physical or online store selling LED products.
PUR cable
Cable with polyurethane sheath; abrasion-resistant for mobile LED installations.
Purging
Process of removing moisture from a sealed LED profile before sealing.
Purlin mount
Mounting of LED fixtures on purlins and roof structures.
Purple LED
Purple LED (380-420 nm); for decorative effects and UV applications.
Push button interface
Interface for connecting traditional buttons to the LED control system.
Push-fit connector
Quick push-in connector for LED strips.
Push-in connector
Screwless connector with push-in cable insertion; simplifies wiring of LED installations.
PVC (cloruro di polivinile)
Plastic material used for cable sheaths and IP coating of some LED strips.
PVC conduit
PVC tube for protecting LED cables.
PVC profile
PVC profile for housing LED strips; economical alternative to aluminum.
PWM (Pulse Width Modulation)
Pulse width modulation; dimming technique varying the on/off ratio of the high-frequency signal. ↑ Back to top
Q
Q-factorQuality factor of a resonant circuit; in LED drivers it influences filtering.
QA inspection
Quality control inspection on LED products in production.
QA manager
Quality control manager in LED production.
QA procedure
Quality control procedure for LED products.
QA report
Quality control report with LED test results.
QA standard
Quality standard applied to the production of LED components.
QA test
Quality control test performed on LED products.
QC (Quality Control)
Quality control during the production of LED strips, profiles, and power supplies to ensure compliance with standards.
QLC+ (software)
Open-source software for DMX control of LED installations.
QR code (su strip)
QR code printed on LED strips for traceability and specifications.
Quad-color LED
LED with four dies (e.g., RGBW) in the same package.
Quadrant detection
Spatial quadrant detection for LED systems with position sensors.
Qualified electrician
Qualified electrician for the installation of LED installations.
Qualified installer
Qualified and certified installer for professional LED systems.
Qualified product list
List of qualified and approved LED products for the project.
Qualità certificata LED
LED products with internationally recognized quality certifications.
Qualità costruttiva profilo
Quality level of the production of the aluminum LED profile.
Qualità del biadesivo strip
Performance and durability of the adhesive on the back of the LED strip.
Qualità del chip LED
Performance and reliability level of the LED chip in the strip.
Qualità del driver LED
Performance, efficiency, and reliability level of the LED power supply.
Qualità della finitura profilo
Uniformity and durability of the surface finish of the LED profile.
Qualità della luce LED
Set of parameters defining the quality of light: CRI, CCT, uniformity, UGR.
Qualità della saldatura strip
Quality of the solder joints on the LED strip; reliability of contacts.
Qualità ottica del diffusore
Uniformity, transmittance, and absence of defects of the LED cover.
Qualitative assessment
Qualitative assessment of LED lighting in an environment.
Qualitative lighting
LED lighting evaluated not only for quantity but for perceived quality.
Quality assurance (QA)
Quality assurance system in the production of LED components.
Quality audit
Quality audit of the LED production process.
Quality bin
Quality group in the binning process of LED chips.
Quality certificate
Quality certificate of the LED product issued by the manufacturer.
Quality control chart
Quality control chart for the production of LED strips.
Quality control inspector
Quality control inspector in the LED strip factory.
Quality control process
Quality control process in the production of LED strips.
Quality control test
Specific test in the LED quality control process.
Quality grade
Quality grade of the LED product: standard, premium, professional.
Quality improvement
Continuous improvement of the quality of LED products.
Quality management system
Quality management system in LED production; ISO 9001.
Quality specification
Quality specifications required for LED products in the project.
Quality standard compliance
Compliance with quality standards in LED production.
Quality test certificate
Certificate of quality tests performed on the batch of LED products.
Quantitative analysis
Quantitative analysis of the performance of the LED installation.
Quantum dot
Semiconductor nanocrystal that, stimulated by blue LED light, emits pure and saturated colors; emerging technology for displays and lighting.
Quantum efficiency
Quantum efficiency of the LED chip; ratio of emitted photons/injected electrons.
Quantum well
Quantum well in the semiconductor LED where light emission occurs.
Quarter-turn fastener
Quarter-turn fixing for quick mounting of LED fixtures.
Quarter-wave coating
Quarter-wave anti-reflective coating on LED lenses.
Quarter-wave plate
Optical element modifying the polarization of LED light.
Quasi-monochromatic
LED with a very narrow emission spectrum; almost monochromatic.
Quasi-resonant converter
Quasi-resonant converter in the LED driver for high efficiency and low noise.
Quasi-static test
Slow-variation parameter test to characterize LED performance.
Quay lighting LED
LED lighting for quays and docks.
Quench (spegnimento)
Process of rapid LED shutdown for testing or protection.
Quenching circuit
Rapid shutdown circuit for LED protection.
Queue management LED
LED display for queue management in offices and shops.
Quick change connector
Quick-change connector for fast maintenance of the LED system.
Quick clamp
Quick clamp for temporary fixing of LED profiles.
Quick connect
Quick connection system for LED strips and cables.
Quick coupling
Quick coupling for plug-and-play connections of LED strips.
Quick disconnect
Quick-disconnect connector for fast maintenance.
Quick install bracket
Bracket for quick installation of the LED profile without tools.
Quick install clip
Clip for quick mounting of the LED profile with a click.
Quick installation kit
Kit for quick installation of LED profiles with snap-on clips.
Quick mount system
Quick mounting system for professional LED profiles.
Quick release bracket
Quick-release bracket for maintenance of LED fixtures.
Quick release diffuser
Quick-release diffuser for easy access to the LED strip.
Quick splice connector
Quick splice connector for LED cables without tools.
Quick start
Quick startup without delay of the LED fixture.
Quiescent current
Quiescent current of the LED power supply in standby.
Quiet driver
Silent LED power supply without audible hum.
Quiet operation
Silent operation of the LED power supply; absence of acoustic noise.
Quota di incasso
Dimension of the seat to be routed or prepared in the support to house a recessed LED profile. ↑ Back to top
R
R1-R15 (campioni CRI)The 15 standardized CIE color samples used to calculate the detailed color rendering index of an LED.
R9 (rosso saturo)
Specific CRI sample measuring the rendering of saturated red; essential for food, art, and retail applications.
Ra (indice)
Arithmetic mean of samples R1-R8 for color rendering.
Raccoglitore di dati LED
Device recording the operating parameters of the LED installation.
Raccomandazione illuminotecnica
Technical recommendation for the correct design of the LED installation.
Raccordo a croce profilo
Element connecting four LED profiles in a cross.
Raccordo a T profilo
Element connecting three LED profiles in a T.
Raccordo angolare profilo
Element connecting two LED profiles at an angle.
Raccordo curvo profilo
Curved element connecting two LED profiles in a curve.
Raccordo flessibile
Flexible element connecting LED profiles on irregular surfaces.
Raceway
Raceway for routing and protecting LED cables.
Rack mount
Mounting of LED equipment (controllers, power supplies) in a standard 19-inch rack.
Rack mount driver
LED power supply for mounting in a 19-inch rack.
Radar sensor
Microwave radar sensor for presence and motion detection for LEDs.
Radial distribution
Radially symmetric light distribution of the LED fixture.
Radial fin heatsink
Heat sink with radial fins for circular LED fixtures.
Radial symmetry
Rotational symmetry of the LED light distribution.
Radiance
Radiant power per unit area and solid angle; in W/sr/m2.
Radiant efficiency
Ratio between radiant power emitted and electrical power absorbed by the LED.
Radiant flux
Total radiant power emitted by the LED; in Watts.
Radianza (LED)
Radiant power per unit area and solid angle emitted by the LED.
Radiation angle
Radiation angle of the LED beam.
Radiation cooling
Cooling by radiation from the surface of the LED profile.
Radiation efficiency
Radiative efficiency of the surface of the LED profile.
Radiation pattern
Radiation pattern of the LED; similar to the photometric curve.
Radiatore
See "Heat sink". Metal element for dissipating heat from LEDs.
Radiazione infrarossa LED
IR component in LED light; negligible in quality white LEDs.
Radiazione ultravioletta LED
UV component in LED light; negligible in quality white LEDs.
Radiazione UV
Ultraviolet component of the spectrum; quality LEDs emit negligible UV, unlike fluorescent lamps.
Radiazione visibile LED
Visible component (380-780 nm) of the light emitted by the LED.
Radio controlled clock
Radio-controlled clock for time synchronization of the LED installation.
Radio frequency controller
LED controller based on radio frequency communication.
Radio frequency dimmer
Radio frequency dimmer for wireless LED control.
Radio frequency shielding
RF shielding to prevent interference with wireless LED controllers.
Radio interference
Radio interference that can disturb wireless LED controllers.
Radio modem LED
Radio modem for wireless communication between LED controllers.
Radiometro
Instrument for measuring the radiant power of the LED.
Raggio di curvatura
Minimum radius within which a flexible LED strip or neon flex can be bent without damage.
Rail adapter
Adapter for mounting LED fixtures on rails and guides.
Rail clip
Clip for fixing LED fixtures on rails and guides.
Rail connector
Electrical connector for joining sections of LED track.
Rail end cap
End cap of the electrified LED track.
Rail joint connector
Connector for joining sections of LED track.
Rail mounting clip
Clip for DIN rail mounting of LED power supplies.
Rail section
Section of the electrified LED track.
Rail suspension kit
Suspension kit for the LED track from the ceiling.
Rain cover
Rain cover for semi-exposed LED fixtures.
Rain guard
Rain protection for semi-exposed LED fixtures.
Rain rated
LED fixture certified for exposure to rain.
Rain sensor
Rain sensor for automatic management of outdoor LED lighting.
Rainbow effect
Rainbow effect on RGB addressable LED strips with color transitions.
Rainproof enclosure
Rainproof enclosure for LED power supplies.
Raised floor lighting
LED lighting under the raised technical floor.
Rame (conduttore)
Metal with high electrical conductivity for the tracks of the LED strip PCB.
Rame OFC
Oxygen-free copper for low-resistance LED conductors.
Ramp dimming
Dimming with a gradual programmable transition.
Ramp function
Ramp function for gradual on/off of LEDs.
Ramp rate setting
Setting of the ramp speed for LED dimming.
Ramp-down time
Gradual decrease time of LED brightness to off.
Ramp-up time
Gradual increase time of LED brightness to on.
Random access
Capability to address and control each LED individually in an addressable strip.
Random color effect
Random color change effect on addressable LED strips.
Range extender
Device extending the range of a wireless LED network.
Range finder (sensore)
Distance sensor for proximity control of LEDs.
Range test
Range test to verify wireless LED communication.
Rapid installation
Quick installation of the LED system thanks to plug-and-play components.
Rapid start
Quick startup of an LED tube; without preheating delay.
Rapporto annuale LED
Document with the performance of the LED market during the year.
Rapporto costo-efficienza LED
Evaluation of the LED product based on the ratio of cost to performance.
Rapporto di collaudo LED
Document certifying the successful completion of the final test of the LED installation.
Rapporto di contrasto LED
Ratio between maximum and minimum illuminance created by the LED installation.
Rapporto di misura LED
Document with the results of measurements on the LED installation.
Rapporto di progetto illuminotecnico
Document with calculations and specifications of the LED installation.
Rapporto di progetto LED
Document collecting calculations, specifications, and layout of the LED installation.
Rapporto di uniformità U0
Ratio between minimum and average illuminance; target >0.6 for LEDs.
Rapporto di uniformità Ud
Ratio between minimum and maximum illuminance; for LED distribution.
Rapporto lumen/euro
Cost per lumen purchased; indicator of value of the LED product.
Rapporto lumen/watt
See "Luminous efficacy". Indicator of the energy efficiency of an LED source.
Rapporto qualità LED
Document on the quality of the manufacturer's LED products.
Rapporto qualità-prezzo LED
Evaluation of the LED product based on the ratio of performance to cost.
Rapporto tecnico LED
Document with analysis and results of the performance of the LED installation.
Rassegna prodotti LED
Overview of LED products available on the market.
Ratchet mount
Ratchet mounting for angular adjustment of LED fixtures.
Rate of change
Speed of change of LED brightness or color.
Rated ambient temperature
Nominal ambient temperature for the declared performance of the LED.
Rated input voltage
Nominal input voltage of the LED power supply.
Rated lifetime
Useful life declared by the manufacturer for an LED component.
Rated luminous flux
Nominal luminous flux declared by the LED strip manufacturer.
Rated power
Nominal power declared for the LED strip or power supply.
Rated wattage
Nominal power declared for the LED strip or fixture.
Rating plate
Rating plate of the LED fixture with technical information.
Raw LED chip
LED chip before mounting in the package.
Raw lumen
Luminous flux of the LED chip alone before optical and thermal losses.
Raw material
Raw material for the production of LED strips: copper, aluminum, silicone, phosphors.
Raw material inspection
Inspection of raw materials for LED production.
RDM (Remote Device Management)
Bidirectional protocol based on DMX512 enabling remote configuration and monitoring of LED devices.
Re-lamping plan
Plan for the scheduled replacement of light sources with LEDs.
REACH compliance
Compliance with European REACH regulations on chemicals in LED products.
Reactance
Reactive component of impedance in the LED circuit.
Reactance ballast
Impedance ballast; replaced by electronic LED drivers.
Reactive power compensation
Compensation of the reactive power of the LED power supply to improve PF.
Reading light LED
LED reading light with directional beam and dimming.
Ready-to-install
Pre-assembled LED product ready for immediate installation.
Real estate LED
LED lighting for real estate enhancement.
Real time monitoring
Real-time monitoring of the operating parameters of the LED installation.
Real-time clock (RTC)
Internal clock of the LED controller for time-based programming.
Real-time control
Real-time control of LED lighting.
Real-time data
Real-time data on the performance of the LED installation.
Real-time feedback
Real-time feedback from the LED system to the controller.
Reattanza
Reactive component of impedance in a circuit; in LED drivers it is managed for power factor.
Reazione chimica (fosforo)
Chemical process in the phosphor converting blue LED light to white.
Rebate program
Incentive program for replacing with LED lighting.
Reception LED
LED lighting for reception and front desk; welcoming.
Reception counter LED lighting
LED lighting for reception counters for scenic effects.
Recess depth
Recess depth required for a recessed LED profile.
Recess kit
Kit for recessed mounting of the LED profile in the surface.
Recess slot
Slot in the surface for inserting the recessed LED profile.
Recessed adapter
Component that facilitates insertion of an LED profile into a milled housing.
Recessed ceiling slot
Recessed slot in the ceiling for LED profile.
Recessed channel
Recessed channel in the surface for housing the LED profile.
Recessed downlight
LED downlight completely recessed in the ceiling.
Recessed end cap
End cap for recessed LED profiles.
Recessed floor light
LED light recessed in the floor for signage and decoration.
Recessed housing
Housing for recessed mounting of the LED fixture.
Recessed linear LED
Linear LED profile for recessed installation.
Recessed mounting depth
Depth required for recessed mounting of the LED profile.
Recessed profile
LED profile designed for recessed installation.
Recessed slot profile
LED profile for a recessed slot in the ceiling or wall.
Recessed step light
LED light recessed in the step for staircase lighting.
Recessed trim
Frame for recessed mounting of the LED fixture.
Recessed uplight
LED light recessed in the floor with upward emission.
Recessed wall light
LED light recessed in the wall for corridor lighting.
Recessed wall washer
Recessed LED fixture uniformly illuminating the wall.
Recesso (profilo a)
Recessed profile in the surface.
Recharge cycle
Recharge cycle of the battery of the emergency LED module.
Rechargeable battery
Rechargeable battery for emergency LED modules.
Rechargeable battery / Accumulator
Rechargeable electrochemical device used as an energy reserve for emergency LED systems.
Rechargeable LED light
Portable LED light with rechargeable battery.
Reciprocity (illuminotecnica)
Reciprocity principle in LED light distribution.
Reclaimed wood LED
LED lighting integrated into reclaimed wood for sustainable design.
Reclamation LED
LED lighting for reclaimed and recovered areas.
Recognition distance
Distance at which emergency LED signage is recognizable.
Recommended application
Environment type recommended by the manufacturer for a specific LED product.
Recommended dimmer list
List of recommended dimmers compatible with the LED driver.
Recommended mounting height
Recommended mounting height for the LED fixture.
Recommended wiring
Recommended wiring diagram for the LED installation.
Recommissioning
Reconfiguration of the LED installation after modifications or expansions.
Recording studio LED
LED lighting for recording studios; flicker-free and dimmable.
Recovery mode
Recovery mode of the LED controller after a fault.
Recovery time
Recovery time of the power supply after a protection intervention.
Rectangular beam
Rectangular LED beam obtained with asymmetric optics.
Rectangular profile
LED profile with a standard rectangular section.
Rectifier
Rectifier converting AC to DC; present in every LED power supply.
Rectilinear layout
Rectilinear arrangement of LED fixtures in orderly rows.
Red LED
LED emitting red light (620-635 nm); component of the RGB system and present in RGBW strips.
Red LED (625-635 nm)
Red LED; component of the RGB system with a wavelength of 625-635 nm.
Red shift
Red shift of the LED spectrum due to temperature increase.
Reduced voltage
Reduced voltage; LEDs operate at low DC voltage for safety.
Redundancy
Duplication of critical components to ensure continuity of LED lighting.
Redundant controller
Backup LED controller that takes over in case of failure of the main one.
Reference design
Reference design provided by the LED chip manufacturer for strip development.
Reference standard
Reference standard for calibrating LED measuring instruments.
Referenza installazione LED
Realized LED project as an application example.
Referenze di installazione LED
List of realized LED projects as examples of expertise.
Reflectance
See Reflection coefficient. Percentage of reflected light.
Reflectance map
Map of the reflectances of the surfaces of an environment for LED calculation.
Reflection angle
Angle of the reflected ray relative to the normal.
Reflective ceiling plan (RCP)
Reflective ceiling plan; drawing showing the position of LED fixtures.
Reflective surface
Surface with high reflectance contributing to indirect LED lighting.
Reflective tape
Reflective tape applied in the LED profile to increase useful flux.
Reflector cone
Internal cone reflector in an LED downlight to control the beam.
Reflector cup
Reflector cup in the package of high-power LEDs.
Reflector design
Design of the reflector to optimize LED light distribution.
Reflector material
Reflector material: specular aluminum, metallized plastic.
Reflector profile
LED profile with an integrated internal reflector for controlled distribution.
Reflow oven
Reflow oven for soldering SMD components on the LED strip.
Refresh rate
Refresh rate of the signal on addressable LED strips.
Regola automazione LED
Conditional rule: if sensor detects X then LED does Y.
Regolatore buck-boost
DC-DC converter regulating voltage both up and down for LEDs.
Regolatore di tensione
Integrated circuit stabilizing the supply voltage to a constant value for LEDs.
Regolatore flyback
Isolated converter for constant-current LED drivers.
Regolatore lineare LDO
Low-dropout regulator for auxiliary circuits in the LED driver.
Regolazione del colore LED
Variation of the color emitted by the RGB LED strip via controller.
Regolazione della CCT LED
Variation of the color temperature of the tunable white strip.
Regolazione della luminosità LED
Variation of the luminous intensity of LEDs via dimmer.
Regulation accuracy
Accuracy of voltage or current regulation in the LED power supply.
Relamping
Replacement of traditional light sources with LEDs; retrofit is the more complete version.
Relay control
On/off control of LED circuits via relays.
Relay module
Relay module for on/off control of LED circuits from home automation systems.
Relè
Electromechanical switch electrically controlled; used to turn on/off LED circuits from home automation systems.
Reliability test
Reliability test on LED components with thermal and current cycles.
Relux
Lighting calculation software alternative to DIALux.
Relux Desktop
Lighting calculation software alternative to DIALux.
Relux plugin
Manufacturer plugin for Relux.
Remote control
Remote control for wireless management of LED controllers.
Remote dimming
Remote dimming via remote control or app.
Remote maintenance
Remote maintenance of the LED installation via remote access.
Remote monitoring
Remote monitoring of the operating parameters of the LED installation.
Remote phosphor
Technology where the phosphor is located away from the LED chip (on the diffuser); improves efficiency and chromatic uniformity.
Remote power supply
LED power supply located at a distance from the fixture for ease of access.
Rendering engine
Rendering engine for 3D visualization of LED lighting projects.
Rendering illuminotecnico
Photorealistic visualization of the LED lighting effect in the project.
Rendering notturno
Visualization of the LED lighting effect in nighttime conditions.
Rendimento dell'alimentatore LED
Efficiency of the LED driver; ratio of output/input power.
Rendimento dell'impianto LED
Overall efficiency of the LED installation: source + driver + optics.
Rendimento della strip LED
Luminous efficacy of the LED strip; in lumens per Watt.
Rendimento luminoso
See "Luminous efficacy (lm/W)". Ratio between emitted flux and absorbed power.
Renovation lighting
LED lighting designed for the renovation of existing buildings.
Repeater
Device regenerating and amplifying the signal for extended LED runs.
Repeater unit
Repeater unit extending the LED control signal over long distances.
Replaceability
Ease of replacement of LED components for maintenance.
Replacement LED module
Replacement LED module for fixtures with interchangeable sources.
Requisiti del cliente LED
Needs and specifications of the client for the LED installation.
Requisiti di illuminamento LED
Lux levels required by the standard for each type of environment.
Requisiti di progetto LED
Technical and performance specifications of the LED installation to be achieved.
Requisiti normativi LED
Standards to be respected in the design and installation of the LED installation.
Requisito illuminotecnico
Specification of illuminance, uniformity, and UGR required by the standard for the LED.
Resa cromatica
See "CRI". Fidelity in color reproduction by an LED source.
Resa cromatica alimentare
Capability of the LED to enhance the appearance of meat, fish, fruit, and bread.
Resa cromatica del rosso
Capability of the LED to faithfully reproduce saturated red; sample R9.
Resa cromatica del verde
Capability of the LED to faithfully reproduce green; sample R11.
Resa cromatica della pelle
Capability of the LED to faithfully reproduce skin tones; samples R13-R15.
Resa cromatica eccellente
CRI above 90; for LED applications where color is critical.
Resa cromatica minima normativa
Minimum CRI required by the standard for the specific LED application.
Resa cromatica per arte
Capability of the LED to faithfully reproduce colors in works of art.
Resa cromatica per moda
Capability of the LED to faithfully reproduce colors of fabrics and clothing.
Resa cromatica standard
CRI between 80 and 89; sufficient for general LED lighting.
Resa dei colori alimentari
Capability of the LED to enhance the appearance of meat, fish, fruit, and bread.
Resa dei colori degli alimenti
Capability of LED light to enhance the appearance of meats, fish, and vegetables.
Resa dei colori della pelle
Capability of LED light to faithfully reproduce human skin tones.
Resa dei colori tessili
Capability of the LED to faithfully reproduce fabric colors in retail.
Resa luminosa della strip
Luminous flux emitted by the LED strip per meter; in lm/m.
Resa luminosa per metro
Luminous flux of the LED strip expressed in lumens per meter (lm/m).
Resa luminosa strip LED
Luminous flux of the LED strip expressed in lumens per meter.
Reset button
Reset button to restore the LED controller to factory settings.
Residential controller
LED controller designed for domestic use with a simplified interface.
Residential dimmer
Dimmer for residential use compatible with LED strips.
Residential lighting
LED lighting for private homes.
Resina epossidica
Material used for encapsulating LED chips and for IP sealing of strips and connectors.
Resina poliuretanica
Two-component resin for IP sealing of strips and connections.
Resistance (ohmic)
Electrical resistance of the conductors in the LED strip.
Resistance measurement
Measurement of the electrical resistance of the LED strip conductors.
Resistance soldering
Resistance soldering; for connections on LED strips.
Resistenza (elettrica)
SMD component on the LED strip limiting current to the correct value for each group of LEDs.
Resistenza all'acqua LED
Protection of the LED system from water penetration; IP ratings.
Resistenza all'umidità LED
Capability of LED components to function correctly in humid environments.
Resistenza alla corrosione profilo
Capability of the LED profile to resist environmental corrosion.
Resistenza alla polvere LED
Protection of the LED system from dust penetration.
Resistenza del cavo LED
Electrical resistance of the cable connecting driver and LED strip.
Resistenza del diffusore
Capability of the LED diffuser to withstand impacts, scratches, and UV.
Resistenza del profilo LED
Capability of the LED profile to withstand mechanical and thermal loads.
Resistenza delle piste strip
Electrical resistance of the copper tracks on the LED strip PCB.
Resistenza di sense
Low-value resistor for measuring LED current in the driver.
Resistenza di shunt
Parallel resistor for current diversion in the LED circuit.
Resistenza meccanica profilo
Capability of the LED profile to withstand loads without deforming.
Resistenza pull-up
Pull-up resistor towards the supply for bus signals in LED control.
Resistenza SMD 0402
Miniaturized 0402 resistor on the LED strip for current limitation.
Resistenza SMD 0603
0603 resistor on the LED strip; standard size.
Resistenza SMD 0805
0805 resistor on the LED strip; easy to solder manually.
Resistenza termica (Rth)
Measure of the difficulty with which heat flows from the LED chip to the environment; expressed in °C/W.
Resistenza termica del profilo
Capability of the LED profile to transfer heat from the strip to the environment.
Resistor tolerance
Tolerance of the SMD resistors on the LED strip; typically 1% or 5%.
Reso LED
Procedure for returning defective or non-conforming LED products.
Resonant converter
Converter topology in the LED driver for high efficiency and low noise.
Retail application
LEDs for retail stores; high color rendering and calibrated CCT.
Retail display LED
LED lighting for displays and showcases in retail.
Rete di assistenza LED
Network of technical support points for LED products.
Rete di distribuzione LED
Sales and distribution channels for LED products.
Rete di vendita LED
Distribution channels and sales points for LED products.
Rete mesh LED
Wireless mesh network for distributed LED control.
Retention fin
Internal profile tab that secures the LED strip in position.
Retention force
Force with which the diffuser is retained in the LED profile.
Retrofit driver
Power supply designed to replace the ballast in existing fixtures.
Retrofit illuminazione domestica
Replacement of traditional home lighting with LEDs.
Retrofit illuminazione industriale
Replacement of existing industrial lighting with LEDs.
Retrofit illuminazione stradale
Replacement of traditional street lighting with LEDs.
Retrofit illuminazione ufficio
Replacement of fluorescent office lighting with LEDs.
Retrofit LED
Replacement of a traditional lighting system with LEDs, reusing existing structures.
Retroilluminazione
Light from behind a translucent panel.
Retroilluminazione bancone
LED strip behind counters for a luminous effect on the wall.
Retroilluminazione display
LED strip behind displays and screens for bias lighting.
Retroilluminazione mobile
LED strip behind furniture for a floating effect and decorative lighting.
Retroilluminazione pannello
LED strip behind translucent panels for uniform backlighting.
Retroilluminazione specchio
LED strip behind the mirror for diffuse facial lighting.
Retroilluminazione testiera
LED strip behind the headboard of the bed for ambient effect.
Retroilluminazione TV
LED strip behind the TV for bias lighting and visual comfort.
Return on investment (ROI)
Return on investment of LED lighting compared to the previous system.
Return period
Payback period of the investment in LED lighting.
Revenue grade meter
Revenue-grade meter for precise measurement of LED consumption.
Reverse current protection
Protection against current flow in the opposite direction in the LED circuit.
Reverse polarity protection
Protection against reversed connection of + and - cables.
Revit LED family
Family of LED fixtures for Autodesk Revit BIM software.
RF (radiofrequenza)
Radio frequency wireless technology used for LED remote controls and controllers (315 MHz, 433 MHz, 2.4 GHz).
Rf (TM-30 fidelity)
TM-30 color fidelity index.
RF dimmer
Radio frequency dimmer for wireless LED control.
RF interference
Radio frequency interference that can disturb wireless LED controllers.
Rg (TM-30 gamut)
TM-30 saturation index.
RGB (Red Green Blue)
Additive color mixing system with red, green, and blue LEDs to obtain millions of shades.
RGB algorithm
Algorithm in the controller for calculating PWM values of RGB channels.
RGB amplifier
Specific amplifier for RGB strips that replicates the signal across three channels (R, G, B) to extend the system.
RGB color model
Additive color model based on red, green, and blue.
RGB color wheel
RGB color wheel for chromatic selection in the LED app.
RGB controller app
Smartphone application for controlling RGB LED strips.
RGB decoder
Decoder converting DMX signal into three PWM channels for RGB strips.
RGB driver
LED driver with three independent channels for driving RGB strips.
RGB mixing
Mixing of the three red, green, and blue channels to obtain any color.
RGB mixing distance
Distance required between RGB LEDs and diffuser for homogeneous mixing.
RGB pixel
Single addressable RGB LED in a strip; a pixel of colored light.
RGB strip specification
Technical specifications of an RGB LED strip: LED/m, W/m, lm/m, angle.
RGBCCT
LED strip with 5 channels: red, green, blue, warm white, and cool white; maximum chromatic versatility.
RGBCCT amplifier
Five-channel amplifier for RGBCCT strips over extended runs.
RGBW
LED strip with 4 channels: red, green, blue, and dedicated white; purer white than RGB mixing alone.
RGBW amplifier
Four-channel amplifier for RGBW strips, with an additional white channel compared to RGB.
RGBW mixing
Mixing of four channels for colors and pure white.
RGBWW
Variant with an additional warm white channel.
Ribbon cable
Flat multi-conductor cable for orderly LED wiring.
Ricambio diffusore LED
Replacement diffuser for the LED profile for maintenance.
Ricambio end cap LED
Replacement end cap for the LED profile.
Ricambio per profilo LED
Replacement component for the LED profile: diffuser, end cap, clip.
Ricambio strip LED
Replacement LED strip for upgrade or maintenance in the profile.
Ricerca di mercato LED
Study on trends and opportunities in the LED market.
Ricerca e sviluppo LED
Innovation activities in LED technology.
Richiesta di preventivo LED
Request for an offer for the supply of LED products.
Ricombinazione radiativa
Process in the semiconductor LED where an electron recombines with a hole emitting a photon.
Riduttore di canale
Insert adapting the channel of the LED profile to smaller width strips.
Riduzione costi energetici
Objective of LED lighting: reduce the energy bill by 50-80%.
Riduzione dei consumi LED
Decrease in the energy bill obtained with LED lighting.
Riduzione dei costi LED
Optimization of the LED installation to minimize total costs.
Riduzione dell'impronta carbonica
Contribution of LED lighting to the reduction of CO2 emissions.
Riduzione inquinamento luminoso
Contribution of full-cutoff LED fixtures to the protection of the night sky.
Riflessione
Optical phenomenon where LED light bounces off a surface; basis of indirect lighting.
Riflessione del diffusore
Percentage of LED light reflected back by the diffuser; to be minimized.
Riflessione interna totale
Optical phenomenon used in TIR lenses to control the LED beam.
Riflettore
Specular or semi-specular surface redirecting the LED light beam in the desired direction.
Rifrazione
Change of direction of LED light when passing between two different materials.
Rigenerazione del profilo
Restoration of the LED profile by replacing the strip and cleaning the diffuser.
Righello metallico
Steel ruler for precise measurements in cutting LED strips and profiles.
Rigid aluminum bar
Rigid LED bar on an aluminum substrate for maximum dissipation.
Rigid bar
LED bar on a rigid substrate for fixed applications.
Rigidità del profilo LED
Resistance of the profile to bending; depends on the section and material.
Rigidità dielettrica
Maximum voltage withstandable by the insulation without discharge; safety parameter for LED power supplies.
Rilevamento guasti LED
Identification of malfunctions in the LED installation for maintenance.
Rilevatore di fumo LED
LED indicator integrated in the smoke detector for signaling.
Rilevatore di gas LED
LED indicator in gas detectors for industrial environments.
Rilevatore di movimento ceiling
Ceiling-mounted motion sensor for automatic LED activation.
Rilevatore di movimento wall
Wall-mounted motion sensor for LED activation.
Rilevatore di presenza ceiling
Ceiling-mounted presence sensor with 360-degree detection for LEDs.
Rilevatore di presenza wall
Wall-mounted presence sensor for LED control.
Rilievo fotometrico
Field measurement of the illuminance produced by the LED installation.
Ring connector
Ring connector for screw connection.
Ring light LED
Annular LED light for lighting mirrors, photography, and video.
Ripple (ondulazione residua)
Residual variation of the DC voltage on the power supply output; high ripple causes flicker in LEDs.
Ripple di corrente
Ripple of the output current of the LED driver.
Ripple di tensione
Ripple of the output voltage of the LED driver.
Rise time
Rise time of the PWM pulse; influences high-frequency flicker.
Risk assessment
Risk assessment of the LED installation according to safety standards.
Risparmio annuo LED
Amount saved annually on the energy bill thanks to LEDs.
Risparmio bolletta LED
Reduction of electricity costs thanks to LED lighting.
Risparmio energetico LED
Reduction of consumption obtained by replacing traditional lighting with LEDs.
Risposta spettrale dell'occhio
V(lambda) sensitivity curve of the eye; LED lumens are weighted on this curve.
Ristorante LED
LED lighting for restaurants; atmosphere and dimming.
Risultato del calcolo LED
Output of the lighting calculation software: lux, uniformity, UGR.
Risultato del collaudo LED
Outcome of the final verification of the LED installation: compliant or non-compliant.
Ritardo di accensione (start-up delay)
Time required for the power supply to reach stable output voltage after power-on.
Ritorno dell'investimento LED
Time required for LED savings to repay the investment.
Rivendita prodotti LED
Distribution and commercialization activity of LED products.
Rivenditore autorizzato LED
Sales point authorized by the manufacturer for LED products.
RJ11 (connettore)
Telephone connector used in some LED controllers for sensor inputs.
RJ45 (connettore)
Standard Ethernet connector used for Art-Net and sACN protocols in LED control over IP networks.
Roadside LED
LED lighting for roadsides and guardrails.
Roadway LED lighting
Street LED lighting for vehicular roadways.
Roadway lighting
LED lighting for roads and highways.
Rocker switch
Rocker switch for on/off control of LEDs.
Rod suspension accessory
Kit with rigid rods for suspending LED profiles.
RoHS
European directive on the restriction of hazardous substances in electronic components, including LEDs.
Roll (rotolo)
See Reel. Standard packaging of LED strips.
Roller blind LED
Roller blind with integrated LED strip for lighting and privacy.
Roof lighting
LED lighting for roofs and architectural coverings.
Room cavity ratio
Room cavity ratio for LED lighting calculation.
Room index
Proportion index of the room used in lighting calculation.
Root cause analysis
Analysis of the root causes of a fault in the LED system.
Rope clip
Clip for suspension cable of pendant LED profiles.
Rope light LED
Flexible LED light tube for decoration.
Rosone per sospensione
Decorative ceiling element covering the anchor point of the LED profile.
Rotatable connector
Rotatable connector for variable angles between LED strip segments.
Rotation mount
Rotating support for orienting LED fixtures.
Rotella
See "Reel". Spool on which the LED strip is wound for packaging and distribution.
Rotolo di strip LED
Reel of wound LED strip; standard format 5 or 10 meters.
Rough-in bracket
Pre-installation bracket installed before finishing for mounting the LED profile.
Round profile
LED profile with a circular section for pendant applications.
Round terminal accessory
Rounded end cap for round LED profiles.
Router (wireless)
Network device for connecting Wi-Fi LED controllers.
RPM (Remote Phosphor Module)
Module with interchangeable remote phosphor to vary the color temperature of an LED fixture.
RS-232
Serial communication standard for interfacing with LED controllers from a PC.
RS-485
Serial communication standard used as the physical basis for the DMX512 protocol.
Rubber gasket
Rubber gasket for IP sealing of LED profiles and fixtures.
Rubber mount
Rubber anti-vibration support for LED fixtures in industrial environments.
Ruggedized LED
Reinforced LED fixture for extreme industrial environments.
Rumore (noise)
Electrical disturbance that can cause flicker or malfunctions.
Run-in test
Initial operating test to verify the stability of the LED system.
Running meter
Linear meter; unit of measurement for ordering LED strips and profiles.
Rust-proof
Rust-resistant; LED profiles in aluminum or stainless steel. ↑ Back to top
S
S-bend connectorS-shaped connector for LED strips that must overcome a level difference.
S-type profile
LED profile with an S-section for installations on curved surfaces.
sACN (Streaming ACN)
DMX data streaming protocol over Ethernet (ANSI E1.31); alternative to Art-Net for LED installations.
Sacrificial anode
Sacrificial anode for cathodic protection of LED profiles in marine environments.
Saddle bracket
Saddle bracket for fixing LED profiles on pipes and cylindrical poles.
Safety barrier
Low-energy safety barrier for LED fixtures in ATEX zones.
Safety chain
Safety chain for suspended LED profiles as anti-fall protection.
Safety class
See Insulation class. Electrical safety classification.
Safety disconnect
Quick disconnection device for the LED circuit.
Safety earth
Safety earth connection for Class I LED fixtures.
Safety extra-low voltage
See SELV. Voltage that does not pose a risk of electrocution.
Safety factor
Safety margin in sizing the LED installation (typically 20-30%).
Safety glass
Safety glass for LED diffusers in public environments.
Safety ground conductor
Yellow-green protective conductor in the LED installation.
Safety interlock
Device interrupting LED power when the enclosure is opened.
Safety label
Safety label with warnings on the LED fixture.
Safety margin
Margin between operating conditions and the maximum limits of the LED system.
Safety relay
Certified safety relay for controlling critical LED circuits.
Safety standard
Safety standard applicable to LED products.
Safety switch
Safety switch for isolating the LED installation.
Safety transformer
Safety transformer with reinforced insulation for LED power supply.
Sala conferenze LED
LED lighting for conference rooms; multiple scenes.
Sala espositiva LED
LED lighting for exhibition halls; high CRI and uniformity.
Sala operatoria LED
LED lighting for operating rooms; very high CRI and medical specifications.
Sala riunioni LED
LED lighting for meeting rooms; dimmable and scenes.
Saldatore a punta fine
Soldering iron with a fine tip for precision connections on LED strips.
Saldatore a stazione
Soldering station with temperature control for LED strips.
Saldatura (soldering)
Process of electrical joining via molten metal alloy; used to connect cables and connectors to LED strips.
Saldatura a onda
Industrial process for PCBs; used in mass production of LED strips.
Saldatura a riflusso (reflow)
SMD soldering with paste and oven; standard for LED strips.
Saldatura sulla strip LED
Connection of cables to the LED strip via molten solder on the pads.
Salt fog test
Salt spray test to verify the corrosion resistance of LED profiles.
Salt spray resistance
Resistance to salt spray corrosion; critical for LEDs in coastal environments.
Sample (campione)
Sample of LED product for evaluation before ordering.
Sample order
Order of LED samples for evaluation before mass production.
Samsung (LED)
See "LED Samsung". Semiconductor division producing high-efficiency LED chips.
Samsung LM281B
Samsung LM281B high-efficiency LED chip for LED strips.
Samsung LM301B
Samsung LM301B LED chip for very high-efficiency LED strips.
Samsung LM301H
Samsung LM301H LED chip for LED grow lights.
Sand blasting
Sandblasting for a matte surface finish on aluminum LED profiles.
Saturated color LED
Monochromatic LED with high saturation of the emitted color.
Saturation control
Adjustment of color saturation in the RGB LED controller.
Saturazione (del colore)
Intensity and purity of a color; a monochromatic LED has high saturation, white has low saturation.
Saturazione cromatica
Purity of the color emitted by the LED; high for monochromatic, variable for white.
Saturazione del colore LED
Purity and intensity of the color emitted by the RGB LED strip.
Sauna application
LED lighting resistant to high temperatures and humidity for saunas.
Sauna LED
LED lighting resistant to heat and humidity for saunas.
Saw cut
Saw cut of the aluminum LED profile to the desired length.
Scala telescopica
Extendable ladder for installing LED profiles at height.
Scale model
Scale model of an LED installation for evaluating the lighting effect.
Scan controller
Controller driving LED matrices sequentially row by row.
Scan rate
Scan speed of channels in a DMX controller.
Scanalatura per profilo LED
Recessed slot in the surface for inserting the recessed profile.
Scelta dei componenti LED
Selection of strips, profiles, drivers, and accessories for the LED project.
Scelta del CRI per l'applicazione
Selection of the color rendering index suitable for the use.
Scelta del diffusore
Selection of the cover type (opal, frosted, transparent) for the LED profile.
Scelta del grado IP LED
Selection of the environmental protection rating suitable for the environment.
Scelta del profilo LED
Process of selecting the profile based on dimensions, finish, and application.
Scelta del profilo per strip
Selection of the profile compatible with the LED strip by size.
Scelta dell'alimentatore LED
Process of selecting the suitable LED driver for the installation.
Scelta dell'alimentatore per strip
Process of selecting the driver suitable for the LED strip.
Scelta della CCT per l'ambiente
Selection of the color temperature suitable for the type of environment.
Scelta della potenza strip LED
Selection of the power per meter of the strip based on the application.
Scelta della soluzione LED
Decision on the most suitable LED system type for the application.
Scelta della strip LED
Process of selecting the LED strip suitable for the application.
Scena buonanotte LED
Scenario gradually turning off all LEDs in the house.
Scena buongiorno LED
Scenario gradually turning on LEDs simulating dawn.
Scena cena LED
Scenario with warm and low light for dinner.
Scena cooking LED
Scenario with high neutral light for the kitchen.
Scena energia LED
Scenario with cool and intense light for productive activities.
Scena luminosa
Predefined combination of intensity, color, and temperature stored in a controller for instant recall.
Scena romantica LED
Scenario with warm light at low intensity and colors.
Scena studio LED
Scenario with neutral light and task lighting for study.
Scena TV LED
Scenario with bias lighting behind the screen and reduced ambient light.
Scenario accoglienza LED
Warm and soft lighting scene for the arrival of guests.
Scenario lavoro LED
Scene with neutral light at high intensity for productive activities.
Scenario presentazione LED
Scene with balanced lighting for meetings and presentations.
Scenario relax LED
Scene with warm light at low intensity for relaxation.
Scene activation
Activation of a lighting scene via command or sensor.
Scene blending
Gradual transition between two different lighting scenes.
Scene button
Dedicated button for recalling a preset lighting scene.
Scene controller wall mount
Wall-mounted controller with buttons for direct selection of scenes.
Scene fade
Fade between two lighting scenes with programmable time.
Scene memory
Memory of the LED controller for storing lighting scenes.
Scene number
Identification number of a stored lighting scene.
Scene programming
Programming of lighting scenes stored in the LED controller.
Scene recall
Recall of a lighting scene from the controller's memory.
Scene selector
Physical or digital selector for choosing the lighting scene.
Scene sequence
Automatic sequence of lighting scenes with programmed times.
Scene store
Storage of a lighting scene in the controller's memory.
Scene timeout
Time after which the current scene returns to the default value.
Scene trigger
Event automatically activating a lighting scene.
Scheda di sicurezza LED
Document with safety information of the LED product.
Scheda prodotto profilo LED
Summary document with the dimensions of the LED profile.
Scheda prodotto strip LED
Summary document with the main parameters of the LED strip.
Scheda tecnica LED
Document with all technical specifications of the LED product.
Scheduling
Time programming of LED lighting for times and days.
Schema di cablaggio LED
Drawing of the electrical connections of the LED installation.
Schema di collegamento strip LED
Drawing of the electrical connections of the LED strip to the driver.
Schema di installazione LED
Drawing with the mounting instructions of the LED system.
Schema di principio LED
Functional diagram of the LED installation with components and connections.
Schema unifilare impianto LED
Simplified electrical diagram of the LED installation with protections.
Schema unifilare LED
Simplified electrical diagram of the LED installation with circuits and protections.
Schematic diagram
Electrical diagram of the LED installation with symbols and connections.
Schermatura EMI
Protection against electromagnetic interference via metal cages or shielded sheaths.
Scintillation
Rapid variation of intensity and color; absent in quality LEDs.
Sconce (applique)
Wall-mounted LED fixture for decorative and ambient lighting.
Sconti per professionisti LED
Prices reserved for installers and designers for LED products.
Scontistica LED
Discount table applicable to LED products by quantity.
Sconto quantità LED
Unit price reduction for large quantity LED orders.
Scotch tape test
Adhesive tape test to verify the adhesion of the tape on the LED strip.
Scotopic vision
Vision in low light; rods more sensitive to blue-green.
Scotopic/photopic ratio
Ratio between night and day vision; influences the perception of LED light.
Screen printing
Screen printing for printing circuits and markings on LED strips.
Screw base LED
LED lamp with an Edison screw base; for retrofit.
Screw cap connector
Connector with a screw-on cap for LED cable joints.
Screw clamp terminal
Screw terminal for connecting cables to the LED power supply.
Screw fixing
Fixing with screws of the LED profile to the surface.
Screw mount
Mounting via screws of LED fixtures and profiles.
Screw terminal
Screw terminal for connecting cables to the LED power supply.
Scuola LED
LED lighting for schools; low UGR and energy savings.
SDCM (Standard Deviation of Color Matching)
Statistical measure of chromatic variability; 1-3 SDCM = excellent uniformity. Equivalent to MacAdam step.
SDCM 1-step
Chromatic variation within 1 MacAdam ellipse; imperceptible.
SDCM 2-step
Chromatic variation within 2 MacAdam ellipses; barely perceptible.
SDCM 3-step
Chromatic variation within 3 MacAdam ellipses; professional standard.
SDCM 5-step
Chromatic variation within 5 MacAdam ellipses; commercial standard.
Sealed beam
LED fixture with optics and source sealed in a single unit.
Sealed connector
Sealed connector with gasket to maintain IP protection.
Sealed driver
Completely sealed LED power supply for IP67 protection.
Sealed enclosure
Sealed enclosure for LED components in aggressive environments.
Sealed unit
Completely sealed LED unit for environmental protection.
Sealing (sigillatura)
Process of applying silicone, resin, or sheath to provide IP protection to the LED strip.
Sealing compound
Sealing compound for IP protection of LED joints and connections.
Sealing gasket
Sealing gasket for the IP rating of LED profiles and fixtures.
Sealing ring
Annular gasket for IP sealing of LED connectors and cable glands.
Sealing strip
Adhesive sealing strip for closing LED profiles.
Seamless connection
Invisible joint between two adjacent LED profiles for a continuous line.
Seamless light
Continuous light without visible interruptions; objective of linear LED installations.
Secondary circuit
Low-voltage secondary circuit of the LED power supply.
Secondary distribution
Distribution of indirect lighting reflected from surfaces.
Secondary optic efficiency
Efficiency of the secondary optics in transferring useful LED flux.
Secondary reflector
Additional reflector redirecting LED light for asymmetric distribution.
Section cut
Cut of the LED strip at the designated point for the desired length.
Secure online LED purchasing
Quality and authenticity guarantee when purchasing LEDs via e-commerce.
Security lighting
LED lighting for perimeter security of buildings and outdoor areas.
Sede del produttore LED
Geographical location of the LED product manufacturer.
Sede di incasso profilo
Recessed cavity in the surface for housing the LED profile.
Segaccio per alluminio
Hand saw for cutting aluminum LED profiles.
Seghetto alternativo
Electric jigsaw for quick cutting of LED profiles.
Segment addressable
LED strip where groups of LEDs are addressable as segments.
Segment controller
Controller managing individual segments of addressable LED strips.
Segment length
Length of the minimum cuttable segment of the LED strip.
Segmento di mercato LED
Portion of the LED market served by the manufacturer: residential, commercial, industrial.
Segmento di taglio
Minimum unit of LED strip that can be separated at the cut point without damaging the circuit.
Segnale analogico
Continuous signal (0-10V, 1-10V) used for analog dimming of LED drivers.
Segnale digitale
Discrete signal (DMX, DALI, PWM) for precise and repeatable control of LED fixtures.
Segnaletica luminosa LED
Signs and illuminated signs with LEDs for orientation and safety.
Selective soldering
Selective soldering of specific components on the LED strip.
Selezione dei migliori prodotti LED
Choice of higher quality LED components for the project.
Selezione del connettore strip
Choice of the connector type suitable for the LED strip and application.
Selezione del diffusore
Choice between opal, frosted, and transparent based on the desired effect.
Selezione del fornitore LED
Choice of the LED manufacturer or distributor for the project.
Self-adhesive
Self-adhesive; LED strip with double-sided tape on the back.
Self-ballasted LED
LED lamp with integrated driver; for standard bases.
Self-contained emergency
Emergency LED fixture with integrated battery and circuit.
Self-dimming
LED fixture automatically adjusting brightness based on ambient light.
Self-healing fuse
Auto-resetting fuse for LED strip protection.
Self-monitoring driver
LED driver with automatic diagnostics signaling anomalies.
Self-regulating
LED driver automatically compensating for voltage and temperature variations.
Self-test (emergenza)
Automatic periodic test of the emergency LED module.
SELV (Safety Extra Low Voltage)
Safety extra-low voltage (≤50V AC or ≤120V DC) without grounding; standard for LED installations.
Semiconductor junction
p-n junction of the semiconductor LED where light emission occurs.
Semiconductor material
Semiconductor material used in LED chips: GaN, InGaN, AlGaInP.
Semiconduttore
Material (GaN, InGaN, AlGaInP) underlying LED technology, emitting photons via electroluminescence.
Semiconduttore composto
Material such as GaN or InGaN used in LED chips; composed of multiple elements.
Seminterrato LED
LED lighting for basements and cellars.
Sensibilità al contrasto
Capability of the visual system to distinguish brightness differences; depends on the LED.
Sensor bracket
Bracket for mounting sensors on the LED profile.
Sensor cable
Cable dedicated to connecting sensors in the LED installation.
Sensor coverage
Area covered by the sensor for activating LED lighting.
Sensor input
Input of the LED controller for connecting sensors.
Sensor integration
Integration of sensors into the LED profile or fixture.
Sensor mounting height
Optimal mounting height of the sensor for LED lighting.
Sensor override
Possibility to manually disable the automatic control of LED sensors.
Sensor response time
Response time of the sensor for activating LED lighting.
Sensor sensitivity
Adjustable sensitivity of the sensor for optimizing LED control.
Sensor timeout
Delay time before LED shutdown after no detection.
Sensor type
Type of sensor: PIR, microwave, ultrasonic, photocell, capacitive.
Sensor zone
Coverage zone of the sensor for controlling LED lighting.
Sensore crepuscolare
Device detecting the natural light level and commanding automatic on/off of LEDs.
Sensore crepuscolare per LED
Sensor switching on LED lighting when natural light fades.
Sensore di luce per LED
Sensor adjusting LED intensity based on available natural light.
Sensore di movimento (PIR)
Passive infrared sensor activating LEDs when people are detected; for corridors, stairs, wardrobes.
Sensore di movimento per LED
PIR sensor activating LED lighting upon people passing.
Sensore di presenza per LED
Sensor keeping LEDs on as long as people are in the environment.
Sensore di prossimità
Device activating LEDs when the hand or body approaches; for under-cabinet and mirror lighting.
Sensore di temperatura (NTC/PTC)
Monitoring temperature for LED thermal protection.
Sensore touch
Capacitive switch activated by touch; integrated into LED profiles for on/off and dimming.
Sensore TRVL
Combined light, temperature, and presence sensor for HCL systems.
Seoul SunLike LED
Seoul SunLike chip with a spectrum similar to sunlight; CRI 97.
Sequential activation
Progressive switching on of LED strip segments one after another.
Sequential control
LED control with sequential activation of segments.
Sequential dimming
Progressive dimming of LED zones in sequence.
Serial communication
Serial communication for LED control: DMX, DALI, SPI, UART.
Serial data
Serial data transmitted to the addressable LED chip for color control.
Serial protocol
Serial communication protocol for LED control.
Series circuit
Series circuit; LEDs of the same strip section are in series.
Series connection limit
Maximum number of LEDs connectable in series before the voltage limit.
Series resistor
Series resistor limiting current to the LED chip in the strip.
Series string
String of LEDs connected in series inside the strip.
Series-parallel circuit
Mixed series-parallel architecture; the most common in LED strips.
Serra rapida
Quick clamp for temporary fixing of the LED profile during processing.
Server room LED
LED lighting for server rooms; high efficiency and low thermal load.
Service access
Access for maintenance of the LED power supply and profile.
Service area
Zone of an LED system accessible for maintenance.
Service cable
Service cable for temporary connection during LED maintenance.
Service door
Service door for access to LED components.
Service life
Total useful life of an LED system including maintenance.
Service manual
Maintenance and repair manual of the LED system.
Servizio clienti LED
Department dedicated to customer support for LED products.
Servizio di configurazione LED
Assistance for setting the parameters of the LED system.
Servizio di consegna LED
Transport of LED products from the warehouse to the site.
Servizio di consulenza LED
Technical support for the choice and design of the LED system.
Servizio di montaggio LED
Specialized labor for the installation of the LED installation.
Servizio di personalizzazione LED
Customization service for LED strips, profiles, and systems.
Servizio di progettazione LED
Professional consulting for the design of the LED installation.
Servizio di progettazione su misura
Customized LED lighting design for the client.
Servizio di spedizione LED
Logistics of delivery of LED products to the customer.
Servizio di taglio a misura LED
Custom cutting of LED strips and profiles to the required length.
Servizio di taglio LED
Custom cutting service of the LED strip according to customer needs.
Set point
Target value of a parameter (lux, CCT) in the LED control system.
Set screw
Grub screw for locking components on LED profiles.
Seven-channel controller
Seven-channel controller for advanced multi-color LED strips.
Sezione cavi per LED
Sizing of the cable cross-section based on current and distance.
Sezione del cavo
Area of the electrical conductor; must be calculated based on current and length to avoid voltage drops.
Sezione del cavo LED
Calculation of the cable cross-section based on current and length of the LED run.
Sezione del diffusore
Shape of the cross-section of the cover: flat, round, teardrop.
Sezione del profilo LED
Shape of the cross-section of the profile: U, V, rectangular, circular.
Sfera integratrice
Spherical instrument for measuring the total luminous flux of the LED.
SFP (Stagnation Failure Point)
Critical temperature at which the thermal degradation of LEDs accelerates irreversibly.
Shade (paralume)
Decorative shade modifying the distribution of LED light.
Shading coefficient
Shading coefficient; influences the calculation of daytime LED lighting.
Shadow gap
Linear shadow created by the joint between the LED profile and the surface.
Shadow-free lighting
LED lighting designed to minimize unwanted shadows.
Shaft light
LED light for light wells and vertical shafts.
Shape factor
Shape factor of the LED profile determining its dissipation properties.
Shared bus
Communication bus shared between multiple LED devices.
Shatter-proof diffuser
Unbreakable polycarbonate diffuser for high-risk environments.
Shelf life
Storage life of LED products before installation.
Shelf lighting
LED lighting integrated into shelves and racks for retail.
Shelf talker LED
Illuminated LED strip for highlighting products on retail shelves.
Shell (involucro)
Outer shell of the LED fixture.
Shield (schermatura)
EMI protection of LED control cables and circuits.
Shielded cable impedance
Impedance of the shielded cable for LED signals: 110 ohms for DMX.
Shielded connector
Connector with EMI shielding for sensitive LED signals.
Shielded enclosure
Enclosure with EMI shielding for LED drivers in disturbed environments.
Shielding effectiveness
Effectiveness of the EMI shielding of the LED fixture.
Shift register
Shift register in the addressable LED chip for data transfer.
Shift register IC
Shift register integrated circuit in the addressable LED chip.
Shimmer effect
Delicate brightness tremor on LEDs for decorative effect.
Ship lighting
LED lighting for ships; resistant to corrosion and vibrations.
Shop fitting LED
LED lighting for the setup of shops and stores.
Short circuit indicator
Indicator signaling a short circuit in the LED system.
Short circuit protection
See "Short circuit protection (SCP)". Safety circuit in the power supply.
Short circuit rating
Maximum short-circuit current tolerable by the LED circuit.
Short throw
Wide LED beam for close-range illumination.
Short throw projector LED
Short-throw LED projector for close-range illumination.
Show room LED
LED lighting for showrooms; high CRI and demonstration scenes.
Showcase lighting
LED lighting for display cases and showcases.
Shower enclosure LED
LED lighting for shower enclosures; IP65 rated and humidity resistant.
Shower light LED
IP65 LED fixture for shower illumination.
Showroom LED
Display environment where LED products can be seen in operation.
Showroom application
LED lighting for showrooms; high CRI and adjustable CCT.
Shrink tube
See Heat shrink tubing. Tube shrinking with heat.
Shunt capacitor
Parallel capacitor for filtering in the LED circuit.
Shunt regulator
Shunt voltage regulator used in some LED circuits.
Shut-down mode
Complete shutdown mode of the LED power supply for zero consumption.
Shut-off angle
Angle beyond which the LED source is no longer visible; anti-glare.
Shutter (otturatore)
Mechanical element blocking the LED beam; for theatrical effects.
Sicurezza elettrica LED
Compliance of the LED installation with electrical safety standards.
Sicurezza fotobiologica LED
Compliance of the LED product with standard EN 62471 on ocular safety.
Side bracket
Side bracket for mounting LED profiles on vertical surfaces.
Side channel
Side channel of the LED profile for cable routing.
Side cover
Side cover of the LED profile for protection and finishing.
Side cutter
Side cutter for precise cutting of LED strips.
Side emitting neon flex
Neon flex with side emission for writings and shapes on flat surfaces.
Side-emitting
See "Lateral emission". LED strip with chips emitting light perpendicular to the mounting surface.
Side-mount connector
Side-mounted connector on the LED strip for low-profile wiring.
Side-mounted profile
LED profile mounted laterally on a vertical surface.
Sight line
Line of sight of the observer; LED lighting must avoid glare along this line.
Signal amplifier
See Signal amplifier. Regenerates the signal for long runs.
Signal booster
Amplifier of the LED control signal for long distances.
Signal cable
Cable dedicated to carrying LED control signals (DMX, DALI).
Signal converter
Converter between different LED signal formats (e.g., DALI to PWM, 0-10V to DMX).
Signal delay
Delay in the transmission of the LED control signal.
Signal distribution
Distribution of the LED control signal to multiple devices.
Signal generator
Signal generator for testing and calibration of LED systems.
Signal ground
Ground of the control signal; reference for DMX and 0-10V.
Signal input
Input of the LED controller or driver for control signals.
Signal integrity
Quality of the LED control signal; degraded by interference and distance.
Signal isolator
Galvanic isolator for LED control signals.
Signal level
Level of the LED control signal; 0-10V, 0-24V, digital.
Signal output
Output of the LED controller for the command signal to drivers.
Signal path
Path of the control signal from the controller to the LED driver.
Signal quality
Quality of the LED control signal; influenced by interference and distance.
Signal relay
Relay for switching low-power LED control signals.
Signal repeater
Repeater of the LED control signal for long runs.
Signal splitter
Splitter of the LED control signal to multiple outputs.
Signal strength
Strength of the wireless signal for remote LED control.
Signal termination
Termination of the DMX signal with a 120 ohm resistor on the last device.
Signal type
Type of LED control signal: PWM, 0-10V, DALI, DMX, SPI.
Signal wiring
Wiring dedicated to LED control signals.
Signal-to-noise ratio (SNR)
Signal-to-noise ratio in LED control circuits.
Silicone
Flexible and heat-resistant polymer material used for IP sheaths, neon flex, and LED encapsulation.
Silicone adhesive
Heat-resistant silicone-based adhesive for LED strips.
Silicone alimentare
Silicone approved for food contact; for LED strips in commercial kitchens.
Silicone cable
Cable with silicone insulation for high temperatures near LEDs.
Silicone coating
Silicone coating for IP protection of LED strips.
Silicone conformal coating
Conformal silicone coating for IP protection of LED strips.
Silicone diffuser
Flexible silicone diffuser for LED neon flex.
Silicone dome
Transparent silicone dome over the LED chip for protection and optics.
Silicone encapsulation
Silicone encapsulation of the LED strip for IP67/IP68 protection.
Silicone extrusion
Silicone extrusion for the production of LED neon flex.
Silicone gel
Silicone gel for soft encapsulation of IP65 LED strips.
Silicone glue
Silicone glue for fixing and sealing LED components.
Silicone HTV
Heat-vulcanizable silicone for sheaths and LED neon flex.
Silicone jacketed cable
Cable with silicone sheath for high-temperature environments.
Silicone lens
Optical silicone lens for high-power LED chips.
Silicone LSR
Liquid silicone for high-precision LED lenses.
Silicone molding
Silicone molding for the production of flexible LED components.
Silicone oil
Silicone oil for thermal transfer in immersion LED systems.
Silicone ottico
High-transparency silicone used as an encapsulant for LED chips and in secondary lenses.
Silicone pad
Silicone pad for cushioning LED components.
Silicone potting
Silicone filling for complete protection of LED strips and connections.
Silicone RTV
Room-temperature-vulcanizing silicone for LED seals.
Silicone rubber
Silicone rubber for IP gaskets and flexible LED components.
Silicone sealant
Silicone sealant for IP sealing of LED joints and end caps.
Silicone sheet
Transparent silicone sheet for surface protection of LED strips.
Silicone sleeving
Silicone sleeve enclosing the LED strip for IP67 protection.
Silicone spray
Silicone spray to facilitate insertion of the strip into the LED profile.
Silicone strip cover
Silicone cover applied over the LED strip for protection.
Silicone trasparente
Transparent silicone sealant for IP protection of LED joints.
Silicone tube
Silicone tube enclosing the LED strip for protection and diffusion.
Silicone washer
Silicone washer for cushioned fixing of LED components.
Silver plated contact
Silver-plated contact for high-conductivity LED connectors.
Silver reflector
Silver deposited reflector for maximum optical efficiency in LEDs.
Simulation result
Result of the lighting calculation showing illuminance and LED uniformity.
Simulation software
Software for simulating LED light distribution.
Simulazione 3D LED
Three-dimensional simulation of LED light distribution in the environment.
Simulazione illuminotecnica
Computerized calculation (DIALux, Relux) of light distribution in an environment to optimize the LED project.
Sinagoga LED
LED lighting for synagogues; respect for architecture.
Sincronizzazione LED multi-room
Synchronization of LED lighting across different rooms.
Single board computer
Single-board computer (Raspberry Pi) for controlling LED strips.
Single channel driver
Power supply with a single output for monochromatic strips.
Single chip LED
LED composed of a single die in the package.
Single color strip
Monochromatic LED strip; one fixed color or temperature.
Single ended driver
LED driver with output on one side; standard for most applications.
Single layer PCB
Single-layer conductive PCB; for simple LED strips.
Single point failure
Single fault causing complete loss of lighting; to be avoided with redundancy.
Single-channel amplifier
Single-channel amplifier for monochromatic strips over long runs.
Sintered optic
Optics in sintered material for diffusion and thermal resistance.
Sistema completo LED
Set of strip, profile, diffuser, end caps, clips, driver, and controller.
Sistema di fissaggio profilo
Method of anchoring the LED profile to the surface: clips, screws, glue.
Sistema di illuminazione LED
Complete set of strips, profiles, drivers, controllers, and LED accessories.
Sistema di montaggio profilo
Method of fixing the LED profile: clips, glue, magnetic, spring.
Sistema di sospensione LED
Kit for hanging LED profiles from the ceiling with cables and tensioners.
Sistema LED integrato
LED installation with all coordinated and compatible components.
Site lighting
Temporary or permanent LED lighting of an industrial or commercial site.
Site survey
Technical site survey for the design of the LED installation.
Sito e-commerce LED
Online sales platform for LED products.
Sito web del produttore LED
Manufacturer's online platform with catalog and LED information.
Six-channel controller
Six-channel controller for RGBCCT LED strips with an additional channel.
Six-wire system
Six-wire system for RGBCCT strips: one common and five channels.
SK6812
Individually addressable RGBW LED chip with digital protocol; evolution of the WS2812B with a white channel.
SK9822
Addressable LED chip compatible with APA102 with improved reliability.
Skin effect
Skin effect in high-frequency conductors; negligible in DC LED strips.
Sky panel LED
LED panel simulating the sky with clouds and light variations.
Skylight (lucernario LED)
LED panel simulating natural daylight; for windowless environments.
Slab profile
Flat and wide LED profile for lighting large surfaces.
Slat light
LED light integrated into wooden or metal slats.
Slave amplifier
Amplifier replicating the signal of the master controller on additional LED strips.
Slave controller
Secondary controller synchronized by the master for extended LED strips.
Slave unit
Secondary unit in a master-slave LED system.
Sleeve (manicotto)
Protective sleeve slipped over the joint of two LED strips.
Slew rate
Rate of change of current in the LED driver; influences dynamic response.
Slide dimmer
Dimmer with a sliding cursor for linear adjustment of LED brightness.
Slide rail
Sliding guide for inserting and extracting the LED profile.
Slide-in (diffusore)
Side insertion system of the diffuser into the groove of the LED profile.
Sliding contact
Sliding electrical contact for length-adjustable LED profiles.
Slim driver
Ultra-thin LED power supply for limited spaces.
Slit aperture
Slit aperture in the LED profile for a narrow and defined light beam.
Slope ceiling mount
Mounting of LED profiles on sloped ceilings with angle adapters.
Slot cutter
Router bit for creating the seat of the LED profile in drywall or wood.
Slot dimension
Dimension of the slot in the ceiling or wall for the recessed LED profile.
Slot profile
Narrow-slot LED profile for a minimal light line.
Slot width
Width of the LED profile slot; determines the visible light line.
Slotted fixing hole
Elongated hole in a profile for screw passage with positional adjustment.
Slow blow fuse
Time-delay fuse tolerating short overcurrents; for inrush current.
Slow fade
Slow fade of LED brightness for very gradual transitions.
Smart building
Intelligent building with LED lighting integrated into automatic management.
Smart building LED
Smart building with LED lighting integrated into the building automation system.
Smart button
Programmable wireless button for controlling LED scenes.
Smart button LED
Wireless button for quick recall of LED scenes.
Smart city lighting
Connected urban LED lighting for efficiency and smart services.
Smart connector
LED connector with an integrated chip for automatic identification and configuration.
Smart dimmer
Dimmer with wireless connectivity for integration into smart home systems.
Smart driver
LED driver with advanced features: reporting, diagnostics, programmability.
Smart grid
Intelligent power grid in which LED lighting participates in energy management.
Smart home
Home equipped with a home automation system for intelligent control of LED lighting and other systems.
Smart light switch
Intelligent switch with wireless connectivity for LED control.
Smart lighting
Connected LED lighting remotely controllable via app, voice assistants, or automations.
Smart meter
Smart meter monitoring the consumption of the LED installation in real time.
Smart plug LED
Smart plug for on/off control and monitoring of LED fixtures.
Smart plug per LED
Smart plug for on/off control of traditional LED fixtures.
Smart sensor
Intelligent sensor with integrated logic for automatic LED control.
Smart strip
LED strip with a wireless controller directly integrated into the PCB.
Smart switch
Intelligent switch with Wi-Fi or Zigbee for LED control.
SmartThings app
Samsung application for controlling smart LED devices.
SMD (Surface Mount Device)
Surface mount device technology; standard for modern LED strips.
SMD 0807
Miniaturized LED package (0.8×0.7 mm) for very high-density strips and micro-applications.
SMD 1206
SMD LED package with dimensions 1206; for professional LED strips and modules.
SMD 1808
SMD LED package with dimensions 1808; for professional LED strips and modules.
SMD 2010
SMD LED package with dimensions 2010; for professional LED strips and modules.
SMD 2016
Compact package (2.0×1.6 mm) for high-density strips with reduced pitch.
SMD 2110
Ultra-compact 2.1×1.0 mm package for COB-like strips.
SMD 2216
LED package (2.2×1.6 mm) used in high-density strips for dot-free uniform lighting.
SMD 2520
SMD LED package with dimensions 2520; for professional LED strips and modules.
SMD 2727
SMD LED package with dimensions 2727; for professional LED strips and modules.
SMD 2835
LED package (2.8×3.5 mm) the most widespread in professional LED strips; high efficiency and versatility.
SMD 3014
LED package (3.0×1.4 mm) compact for medium-high density strips.
SMD 3030
SMD LED package with dimensions 3030; for professional LED strips and modules.
SMD 3030-HV
SMD LED package with dimensions 3030-HV; for professional LED strips and modules.
SMD 335
Side-emitting LED package (3.3×3.5 mm) with lateral emission; for edge lighting and slim profiles.
SMD 3528
LED package (3.5×2.8 mm) of previous generation to the 2835; still used in economical strips.
SMD 3535
LED package (3.5×3.5 mm) square for medium-power strips and linear modules.
SMD 3535-HV
SMD LED package with dimensions 3535-HV; for professional LED strips and modules.
SMD 3838
LED package (3.8×3.8 mm) for high-power strips with good thermal dissipation.
SMD 4014
4.0×1.4 mm package for high-density and high-power strips.
SMD 4040
LED package (4.0×4.0 mm) high power for LED strips with high luminous output.
SMD 5050
LED package (5.0×5.0 mm) with three internal dies; used in RGB strips and early generations.
SMD 5054
SMD LED package with dimensions 5054; for professional LED strips and modules.
SMD 5630
LED package (5.6×3.0 mm) high power for LED strips with high luminous flux.
SMD 5730
5.7×3.0 mm package similar to the 5630; widespread in rigid bars.
SMD 7020
SMD LED package with dimensions 7020; for professional LED strips and modules.
SMD 7030
SMD LED package with dimensions 7030; for professional LED strips and modules.
SMD 7070
SMD LED package with dimensions 7070; for professional LED strips and modules.
SMD component
Surface-mount electronic component present on the LED strip.
SMD LED package
Enclosure of the LED chip for surface mounting on the strip.
SMD resistor
Surface-mount resistor on the LED strip for current limitation.
SMD soldering
Soldering of surface-mount components on the LED strip.
Smoke detector LED
Smoke detector with integrated status LED indicator.
Smooth dimming curve
Smooth dimming curve without perceptible jumps or steps.
Snap bracket
Snap-on bracket for quick fixing of LED profiles.
Snap connector
Snap connector for quick connection of LED strips.
Snap-fit joint
Snap-fit joint between LED profile components.
Snap-in (clip)
Snap-on attachment for diffusers and covers.
Snoot
Tubular accessory narrowing the LED beam for precise accent lighting.
Snow load
Snow load on outdoor LED fixtures; for support dimensioning.
Snubber circuit
RC circuit suppressing voltage transients in LED dimmers.
Socket (presa)
Socket for connectors; for interchangeable LED modules.
Socket adapter
Adapter for different LED lamp holders.
Socket panel
Panel with multiple sockets for connecting LED power supplies.
Soddisfazione del cliente LED
Level of customer satisfaction with the LED product and service.
Sodium replacement
Replacement of sodium lamps with LEDs for street lighting.
Soffit lighting
LED lighting integrated into the underside of a projection or cornice.
Soffitto luminoso LED
Ceiling fully illuminated with diffused LED strips or panels.
Soft glow
Soft and diffused light; achieved with opal diffusers and low CCT.
Soft on/off
Gradual on/off of LEDs for visual comfort.
Soft start
Gradual startup of the power supply with limited inrush current; protects LEDs and the circuit.
Soft starter
Device limiting the startup current of the LED power supply.
Soft white (2700K)
Standard color temperature for warm residential lighting.
Softbox LED
LED light with soft diffuser for photographic and video lighting.
Software di controllo LED
Application for managing LED lighting from a PC or smartphone.
Software update
Update of the software of the LED control system.
Soglia di illuminamento LED
Minimum lux level required by the standard for the LED application.
Soil moisture sensor LED
Soil moisture sensor for controlling garden LEDs.
Solar charge controller
Solar charge controller for off-grid LED systems.
Solar LED
LED system powered by photovoltaic panels; for autonomous lighting.
Solar panel LED system
Autonomous LED system with solar panel and battery.
Solar powered LED
LED fixture powered exclusively by solar energy.
Solar radiation sensor
Solar radiation sensor for controlling LED daylight harvesting.
Solder bridge
Accidental solder bridge between two adjacent pads on the LED strip.
Solder flux
Flux material facilitating the soldering of LED contacts.
Solder joint
Solder joint between the cable and the pad of the LED strip.
Solder mask
Green or white solder mask on the LED strip PCB.
Solder pad
See "Soldering pad". Copper area on the strip for connections.
Solder pad spacing
Distance between soldering pads on the LED strip.
Solder paste
Soldering paste applied on pads before reflow soldering.
Solder point
Soldering point on the LED strip for cable connections.
Solder reflow profile
Thermal profile of the soldering oven for LED strips.
Solder tip
Tip of the soldering iron for precision work on LED strips.
Solder wick
Desoldering braid for removing excess solder from the LED strip.
Solder wire
Solder wire for manual soldering on LED strips.
Soldering iron
Soldering iron for manual connections on LED strips.
Soldering station
Professional soldering station with temperature control.
Solderless connector
Solderless connector for LED strips; clip or press type.
Solid copper wire
Solid copper wire for LED power supply; stiffer than stranded.
Solid state lighting (SSL)
Solid-state lighting; technical term encompassing all LED technologies.
Solid state relay (SSR)
Solid-state relay for silent switching of LED circuits.
Solo operation
Autonomous operation of the LED controller without network connection.
Soluzione chiavi in mano LED
Complete service from analysis to delivery of the functioning LED installation.
Soluzione economica LED
LED product with a good quality-price ratio for limited budgets.
Soluzione LED chiavi in mano
Complete service: analysis, design, supply, installation, testing.
Soluzione LED personalizzata
LED system designed and configured for the specific needs of the client.
Soluzione premium LED
High-end LED product for prestigious projects.
Soluzione standard LED
Mid-range LED product for general applications.
Soluzione tecnica LED
Technical response to a lighting problem with LED technology.
Sonda passacavi
Flexible guide wire for threading LED cables into conduits and suspended ceilings.
Sonic sensor
Ultrasonic sensor for presence and distance detection for LEDs.
Soppalco LED
LED lighting for mezzanines and lofts.
Sorgente luminosa LED
Any component emitting light via LED technology.
Sorgente puntiforme
Single LED or concentrated in a point; as opposed to the linear source of LED strips.
Sostenibilità dei prodotti LED
Manufacturer's commitment to reducing the environmental impact of LEDs.
Sostituzione del diffusore
Operation of removing and installing a new diffuser in the profile.
Sostituzione dell'alimentatore LED
Operation of replacing a faulty LED power supply.
Sostituzione della strip LED
Operation of removing and installing a new strip in the LED profile.
Sostituzione lampade con LED
Process of converting traditional lighting to LED.
Sotto mensola LED
LED lighting mounted under shelves to enhance objects.
Sotto pensile LED
LED lighting mounted under kitchen cabinets for the work surface.
Sottopasso LED
LED lighting for pedestrian and vehicular underpasses.
Sottopensile
Under-cabinet lighting.
Sound activated LED
LED strip reacting to sound via an integrated microphone.
Sound insulation
Acoustic insulation of the LED profile; relevant in noise-sensitive environments.
Source color temperature
Color temperature of the LED source specified by the manufacturer.
Source current limit
Maximum current deliverable by the LED power source.
Source efficacy
Efficacy of the LED source alone before fixture losses.
Source efficacy rating (SER)
Rating of the efficacy of the LED source.
Sovradimensionamento (alimentatore)
Practice of choosing a power supply with 20-30% higher power than the LED load for reliability.
Space heater effect
Heat emitted by the LED into the environment; negligible for strips, significant for projectors.
Space ratio
Ratio between the spacing of LED fixtures and the installation height.
Spacer
Spacer between the LED strip and the profile for position adjustment.
Spacing (LED)
Distance between the centers of two consecutive LEDs on the strip.
Spaghetti wiring
Messy wiring; to be avoided with planning and conduits.
Span (luce libera)
Distance between the support points of a suspended LED profile.
Spare parts kit
Spare parts kit for the maintenance of the LED installation.
Spare parts LED
Spare parts available for the maintenance of the LED installation.
Spark arrestor
Anti-spark device for protection of LED circuits in ATEX zones.
Spark gap
Spark gap protecting LED circuits from sudden overvoltages.
Spa application
LED lighting for wellness centers; chromotherapy and waterproof designs.
Spec sheet
Technical specification sheet of the LED product.
Special effects lighting
LED lighting for special effects: flash, strobe, chase, rainbow.
Specifica del profilo LED
Document with all dimensions and characteristics of the profile.
Specifica dell'alimentatore LED
Document with the electrical parameters of the LED driver.
Specifica della strip LED
Document with all technical parameters of the LED strip for the project.
Specifica di acquisto LED
Document defining the requirements of the LED product to be purchased.
Specifica di progetto LED
Document with all technical requirements of the LED installation.
Specifica tecnica LED
Document with the technical requirements of the LED installation for the specification.
Specification grade
Professional-grade LED product conforming to rigorous technical specifications.
Specifiche del profilo LED
Technical parameters: dimensions, material, finish, weight, strip compatibility.
Specifiche dell'impianto LED
Document with the detailed technical requirements of the LED installation.
Specifiche della strip LED
Complete technical parameters: CCT, CRI, W/m, lm/m, LED/m, IP, width.
Specifiche minime LED
Minimum performance requirements that the LED product must meet.
Specifiche tecniche prodotto LED
Complete document with all parameters of the LED product.
Spectral absorption
Selective absorption of specific wavelengths by phosphor or LED diffuser materials.
Spectral analysis
Measurement of LED emission spectrum using a spectrometer.
Spectral band
Range of wavelengths emitted by an LED; in white LEDs, it is a broad continuous spectrum.
Spectral data
Complete spectral data of an LED source for colorimetric analysis.
Spectral distribution
Distribution of LED luminous energy by wavelength.
Spectral efficiency
Spectral efficiency of the LED; ratio of lumens to radiant power.
Spectral match
Spectral correspondence between the LED source and a reference illuminant.
Spectral output
Spectral distribution of the power emitted by the LED by wavelength.
Spectral power distribution (SPD)
Detailed graph of the power emitted at each wavelength.
Spectral purity
Spectral purity of the monochromatic LED; half-width of the peak.
Spectral response
Spectral response of a sensor or photodetector to LED light.
Spectral tuning
Adjustment of the LED spectrum via mixing chips of different wavelengths.
Spectrum analyzer
Spectrum analyzer for the characterization of LED light.
Spectrum tuning
Adjustment of the LED spectrum via mixing channels of different wavelengths.
Spedizione assicurata LED
Transport of LED products with insurance coverage.
Spedizione gratuita LED
Delivery of LED products without additional costs for the customer.
Speed control
Adjustment of the speed of dynamic effects on addressable LED strips.
Spelafili automatico
Automatic wire stripper for stripping LED cables to the correct length.
Spessore del diffusore
Thickness of the LED profile cover; influences transmittance.
Spessore del PCB strip
Thickness of the printed circuit board of the LED strip; typically 0.12-0.2 mm.
Spessore del profilo LED
Total height of the LED profile section; determining factor for recessing.
Spessore della strip LED
Height of the LED strip; typically 1-2 mm for standard strips.
Spettro continuo
Light emission covering without gaps all visible wavelengths; Full Spectrum LEDs approach this ideal.
Spettro di emissione
Graph showing the distribution of the light energy emitted by an LED at different wavelengths.
Spettro elettromagnetico
Full range of radiation; visible LED light occupies 380-780 nm.
Spettrometro a fibra ottica
Portable spectrometer with optical fiber for field measurements of LEDs.
Spettroradiometro
Laboratory instrument for measuring the complete emission spectrum of an LED source.
SPI (Serial Peripheral Interface)
Serial protocol for addressable strips (WS2812, SK6812, APA102).
Spike protector
Protection device against voltage spikes in the LED circuit.
Spillage
LED light escaping from the intended beam, illuminating unwanted areas.
Spine mount
Mounting on a central supporting structure for bilateral LED profiles.
Spiral LED
LED strip mounted in a spiral around a cylindrical structure.
Splash-proof
Protected against water splashes; equivalent to IP44 for LED fixtures.
Splashback LED
LED lighting of the wall between the work surface and wall cabinets in the kitchen.
Splice connector
Connector for splicing two cables without cutting the conductor.
Split driver
Configuration with the LED driver divided between a power section and a control section.
Split mount
Two-part mounting system: fixed base and removable LED profile.
Spool (bobina)
Spool on which the LED strip is wound for packaging.
Spot (illuminazione)
Light beam concentrated on a specific point; achieved with optics or lenses on LED sources.
Spot weld
Spot welding for fixing metal components on LED profiles.
Spotlight LED
LED spotlight with a concentrated beam for accent lighting.
Spray coat
Spray painting of LED profiles for custom finishes.
Spring balance
Spring mechanism for adjusting the height of suspended LED profiles.
Spring clamp
Spring clamp for quick connection of LED cables.
Spring clip
Spring clip for quick fixing of recessed LED profiles in suspended ceilings.
Spring hinge
Spring hinge for openable diffusers of LED profiles.
Spring loaded contact
Spring contact for reliable connection on LED strips.
Spring mount
Spring mounting for inserting recessed LED profiles into the suspended ceiling.
Spring steel clip
Spring steel clip for elastic fixing of LED profiles.
Spring terminal
Spring terminal for quick and tool-free connection of LED cables.
Spring washer
Spring washer to prevent loosening of LED fixing screws.
Squadra da falegname
Carpenter's square for verifying right angles during the installation of LED profiles.
Square profile
LED profile with a square section for geometric installations.
sRGB
Standard color space for monitors; used as a reference in the calibration of LED systems for backlighting.
Stabilimento LED
LED lighting for production plants; efficiency and sensors.
Stabilità cromatica LED
Constancy of the color of LED light over time and with temperature changes.
Stabilità del flusso LED
Constancy of LED brightness over time under operating conditions.
Stabilized output
Stabilized output of the LED power supply with precise regulation.
Stack mounting
Stacked mounting of multiple LED strips for doubled brightness.
Stadio LED
LED lighting for stadiums; high power and absence of flicker.
Stadium lighting LED
LED lighting for stadiums and sports facilities.
Staffa
Metal support for wall, ceiling, or other structure mounting of LED profiles and fixtures.
Staffa a L per parete
L-shaped bracket for wall mounting of the LED profile.
Staffa a U per soffitto
U-shaped bracket for ceiling mounting of the LED profile.
Staffa di inclinazione
Bracket allowing tilting of the LED profile relative to the surface.
Staffa di sospensione
Element for hanging LED profiles from cables or rods.
Staffa per profilo LED
Mounting accessory for securing the profile to the surface.
Staffa regolabile in altezza
Height-adjustable bracket for suspended LED profiles.
Stagger mount
Staggered mounting of side-by-side LED strips to eliminate dark spots.
Staging area
Preparation area where LED components are assembled before installation.
Stagno senza piombo
Lead-free solder alloy compliant with RoHS for LED strip production.
Stainless hardware
Stainless steel screws and hardware for LED installations in corrosive environments.
Stainless steel profile
LED profile in stainless steel for highly corrosive environments.
Staircase lighting
LED lighting for stairs; safety and aesthetics.
Stampa 3D per LED
Rapid prototyping of LED components with a 3D printer.
Stand-by (consumo)
Electrical power absorbed by the power supply or controller when the LED is off; ideally < 0.5W.
Standalone controller
LED controller operating autonomously without network connection.
Standard color rendering
Standard color rendering with CRI between 80 and 89.
Standard density strip
LED strip with 60 LED/m; standard density for general lighting.
Standard dimming protocol
Standardized dimming protocol: DALI, DMX, 0-10V.
Standard illuminant
CIE reference illuminant for evaluating LED color.
Standard profile
LED profile of standard dimensions and shape available in the catalog.
Standard qualitativo LED
Quality level guaranteed by the manufacturer for their LED products.
Standby consumption
Consumption of the LED power supply in standby mode; ideally below 0.5W.
Standby mode
Standby mode of the LED power supply with reduced consumption.
Standby relay
Relay completely disconnecting the LED power supply in standby for zero consumption.
Stanza smart LED
Environment with LED lighting fully integrated into the smart home system.
Star connection
Star connection; each LED strip connected directly to the power supply.
Star network
Star network topology for centralized LED control.
Star wiring
Star wiring; each LED strip connected directly to the power supply.
Start-up current
Current at startup of the LED power supply; see Inrush current.
Start-up delay
Delay between power supply startup and LED emission.
Start-up time
Time required for the LED power supply to reach stable voltage.
Starter (LED tube)
Replacement device for installing LED tubes in fluorescent fixtures.
State machine
State machine in the LED controller for managing sequences and effects.
State-of-the-art
State-of-the-art LED technology; maximum current efficiency and performance.
Static color
Fixed color set on an LED strip; without dynamic effects.
Static electricity
Static electricity; risk for LED chips during handling.
Static pressure
Static pressure inside sealed LED fixtures.
Statistical analysis
Statistical analysis of LED production data for quality control.
Stato dell'impianto LED
Current operating condition of the LED system: operational, under maintenance, fault.
Stato dell'ordine LED
Current status of the LED product order: in progress, shipped, delivered.
Status LED
LED indicator showing the operating status of a device.
Steady state
Steady-state condition where LED temperature and performance stabilize.
Steady state temperature
Temperature reached by the LED system after the initial transient.
Steam room LED
LED fixture resistant to steam for Turkish baths and hammams.
Steel cable
Steel cable for suspending LED profiles from the ceiling.
Steel wire rope
Steel wire rope for suspending heavy LED fixtures.
Step change
Step change in LED brightness; without gradual transition.
Step dimming
Dimming in discrete steps rather than continuous.
Step down converter
Step-down DC-DC converter; common topology in LED drivers.
Step MacAdam
See "MacAdam ellipse". Unit of measurement of chromatic consistency between LEDs; ≤3 steps = imperceptible.
Step up converter
Step-up DC-DC converter to power high-voltage LEDs.
Sterilization LED
UV-C LED for sterilization of surfaces, water, and air.
Stiffener plate
Reinforcement plate for long LED profiles to reduce bending.
Stima dei consumi LED
Forecast calculation of the energy consumption of the LED installation.
Stima del risparmio LED
Forecast calculation of the savings obtainable with LED lighting.
Stoccaggio a temperatura controllata
Storage of LED products in a temperature- and humidity-controlled environment.
Stoccaggio LED
Storage conditions of LED products before installation.
Stochastic dimming
Dimming with small random variations to simulate natural light.
Stock item
LED product available in stock for immediate delivery.
Stop-start function
Stop and restart function of the LED installation.
Storage battery
Storage battery for off-grid or emergency LED systems.
Storage condition
Storage conditions of LED strips before installation.
Storage temperature
Temperature range for the storage of LED products.
Straight connector
Straight connector for linear joints of LED strips.
Straight profile
Straight LED profile for standard linear installations.
Strain relief
Anti-strain device protecting the cable from pulling at the LED connection point.
Stranded wire
Stranded copper wire; more flexible than solid wire for LED cabling.
Strap mount
Mounting with a metal strap on pipes and structures for LED fixtures.
Strategia di illuminazione LED
Planned approach for the implementation of LED lighting.
Strategic lighting
LED lighting strategically designed to maximize effect with minimum consumption.
Stray light
LED light undesirably scattered outside the intended beam.
Street furniture LED
LED lighting integrated into street furniture: benches, shelters, bollards.
Stress analysis
Analysis of mechanical stresses on LED profiles for structural verification.
Stress relief
Reduction of mechanical stresses in LED connections and cables.
Stress test
Test under extreme conditions to verify the robustness of the LED system.
Strip clamp
Clamp for fixing the LED strip inside the profile during installation.
Strip compatibility
Dimensional compatibility between the LED strip and the aluminum profile.
Strip connector type
Type of connector for LED strips: clip, solder, pogo pin, hippo.
Strip cutting tool
Specific tool for precise cutting of LED strips at the designated point.
Strip density
Number of LEDs per meter on the strip; from 30 to 700+ LED/m.
Strip direction
Power and signal direction of the LED strip; to be respected during installation.
Strip extension
Extension of the LED strip via connector or cable.
Strip feed
Power supply of the LED strip: from one end, from the center, or from both sides.
Strip gauge
Width of the LED strip: 5, 8, 10, or 12 mm standard.
Strip holder
Support holding the LED strip in position during installation.
Strip insertion
Insertion of the LED strip into the seat of the aluminum profile.
Strip joint
Joint between two sections of LED strip.
Strip layout
Arrangement of the LED strip in the project; path, lengths, and feed points.
Strip LED
Flexible printed circuit (FPCB) with surface-mounted SMD LEDs, adhesive on the back; the basic component of linear lighting.
Strip LED 120 LED/m
LED strip with a density of 120 LED chips per meter.
Strip LED 12V
Strip powered at 12V DC; shorter cutting segments but more subject to voltage drop.
Strip LED 12V specification
Complete technical specifications of the LED strip powered at {v} DC.
Strip LED 14.4 W/m
LED strip with a consumption of 14.4 Watts per linear meter.
Strip LED 180 LED/m
LED strip with a density of 180 LED chips per meter.
Strip LED 19.2 W/m
LED strip with a consumption of 19.2 Watts per linear meter.
Strip LED 2200K
LED strip with a fixed color temperature of 2200K.
Strip LED 230V
Strip powered directly by the mains voltage with a rectifier; for very long outdoor linear installations.
Strip LED 24 W/m
LED strip with a consumption of 24 Watts per linear meter.
Strip LED 240 LED/m
LED strip with a density of 240 LED chips per meter.
Strip LED 2400K
LED strip with a fixed color temperature of 2400K.
Strip LED 24V
Strip powered at 24V DC; the best compromise between cuttability and maximum connectable length.
Strip LED 24V specification
Complete technical specifications of the LED strip powered at {v} DC.
Strip LED 2700K
LED strip with a fixed color temperature of 2700K.
Strip LED 28.8 W/m
LED strip with a consumption of 28.8 Watts per linear meter.
Strip LED 30 LED/m
LED strip with a density of 30 LED chips per meter.
Strip LED 3000K
LED strip with a fixed color temperature of 3000K.
Strip LED 3500K
LED strip with a fixed color temperature of 3500K.
Strip LED 352 LED/m
LED strip with a density of 352 LED chips per meter.
Strip LED 36 W/m
LED strip with a consumption of 36 Watts per linear meter.
Strip LED 4.8 W/m
LED strip with a consumption of 4.8 Watts per linear meter.
Strip LED 4000K
LED strip with a fixed color temperature of 4000K.
Strip LED 4500K
LED strip with a fixed color temperature of 4500K.
Strip LED 48 W/m
LED strip with a consumption of 48 Watts per linear meter.
Strip LED 480 LED/m
LED strip with a density of 480 LED chips per meter.
Strip LED 48V
Strip powered at 48V DC; allows very long runs with minimal voltage drop.
Strip LED 48V specification
Complete technical specifications of the LED strip powered at {v} DC.
Strip LED 5000K
LED strip with a fixed color temperature of 5000K.
Strip LED 512 LED/m
LED strip with a density of 512 LED chips per meter.
Strip LED 5700K
LED strip with a fixed color temperature of 5700K.
Strip LED 5V
5V DC strip; for addressable (WS2812B) and USB.
Strip LED 5V specification
Complete technical specifications of the LED strip powered at {v} DC.
Strip LED 60 LED/m
LED strip with a density of 60 LED chips per meter.
Strip LED 6500K
LED strip with a fixed color temperature of 6500K.
Strip LED 700 LED/m
LED strip with a density of 700 LED chips per meter.
Strip LED 9.6 W/m
LED strip with a consumption of 9.6 Watts per linear meter.
Strip LED 90 LED/m
LED strip with a density of 90 LED chips per meter.
Strip LED a luce calda
LED strip with warm CCT (2200-3500K) for residential environments.
Strip LED a luce fredda
LED strip with cool CCT (5500-6500K) for technical environments.
Strip LED a luce neutra
LED strip with neutral CCT (4000-4500K) for multifunctional environments.
Strip LED ad alta efficienza
LED strip with efficacy above 160 lm/W.
Strip LED ad alta resa cromatica
LED strip with CRI above 90 for color fidelity.
Strip LED al metro
Sale of LED strips priced per linear meter.
Strip LED alta potenza
LED strip with consumption above 19.2 W/m for primary lighting.
Strip LED bassa potenza
LED strip with consumption below 5 W/m for decorative lighting.
Strip LED biadesiva
Strip with adhesive tape already applied for direct mounting.
Strip LED catalogo
List of all available LED strips with specifications and prices.
Strip LED COB
Strip with LED chips mounted at minimum distance without visible points; produces a continuous and uniform line of light.
Strip LED compatibile profilo
LED strip with dimensions and characteristics suitable for the chosen profile.
Strip LED con chip Bridgelux
LED strip with high-efficiency Bridgelux LED chips.
Strip LED con chip Cree
LED strip with high-efficiency Cree LED chips.
Strip LED con chip Lumileds
LED strip with Luxeon chips from Lumileds for professional performance.
Strip LED con chip Nichia
LED strip with high-reliability Nichia LED chips.
Strip LED con chip Osram
LED strip with German-quality Osram LED chips.
Strip LED con chip Samsung
LED strip with high-efficiency Samsung LED chips.
Strip LED con chip Seoul
LED strip with Seoul Semiconductor SunLike chips for a natural spectrum.
Strip LED con garanzia
LED strip with manufacturer's warranty on performance and duration.
Strip LED di qualità
Professional LED strip with branded LED chips, tight binning, and copper PCB.
Strip LED doppia fila
LED strip with two parallel rows of chips for doubled flux.
Strip LED economica
Base-level LED strip for non-critical decorative applications.
Strip LED flessibile
LED strip on a flexible substrate that adapts to curved surfaces.
Strip LED IP20
Strip without protection; only for dry indoor use.
Strip LED IP65
Strip with silicone coating on the upper surface; protected from dust and water jets.
Strip LED IP67
Strip completely encapsulated in a silicone sheath; protected from dust and temporary immersion.
Strip LED IP68
Strip with hermetic encapsulation for permanent immersion; suitable for swimming pools and fountains.
Strip LED made in Italy
LED strip produced in Italy with local quality control.
Strip LED media potenza
LED strip with consumption between 9.6 and 14.4 W/m for general lighting.
Strip LED per applicazioni professionali
High-quality LED strip for professional installations.
Strip LED per esterno
LED strip with IP65 or higher protection for outdoor installation.
Strip LED per illuminazione diretta
Directly visible LED strip; requires COB or high density.
Strip LED per illuminazione indiretta
LED strip directed towards the ceiling or wall for diffused light.
Strip LED per interno
IP20 LED strip for installation in dry indoor environments.
Strip LED per professionisti
Professional quality LED strip for installers and lighting designers.
Strip LED professionale
High-end LED strip for professional and architectural installations.
Strip LED RGBA
Strip with red, green, blue, and amber LEDs for an extended gamut.
Strip LED singola fila
LED strip with a single row of chips; standard configuration.
Strip LED su misura
LED strip cut to the exact length required by the project.
Strip LED tagliabile
LED strip with predefined cutting points for customization.
Strip LED ultra sottile
LED strip with reduced PCB thickness for minimal installations.
Strip length calculator
Tool for calculating the required length of LED strip.
Strip mounting
Application of the LED strip to the surface via double-sided tape or profile.
Strip output
Luminous flux and power of the LED strip as a function of length.
Strip pitch
Distance between the centers of two consecutive LEDs on the strip.
Strip power calculator
Tool for calculating the total power of the LED strips in the installation.
Strip removal
Removal of the LED strip from the profile for replacement or maintenance.
Strip replacement
Replacement of the LED strip inside the profile without dismantling the system.
Strip section
Section of the LED strip between two consecutive cut points.
Strip selection guide
Guide to choosing the LED strip based on the application.
Strip soldering pad
Soldering pad on the LED strip for cable connections.
Strip spacing
Distance between two parallel LED strips for uniform lighting.
Strip specification
Complete technical specifications of the LED strip: power, flux, CRI, CCT, IP.
Strip support
Auxiliary support for the LED strip inside the profile.
Strip tester
Tool for functional testing of LED strips before installation.
Strip type
Type of LED strip: SMD, COB, addressable, RGB, CCT, RGBCCT.
Strip voltage
Operating voltage of the LED strip: 5V, 12V, 24V, 48V DC.
Strip width tolerance
Tolerance on the width of the LED strip; critical for profile compatibility.
Strip-to-profile adapter
Component that adapts strips of different widths to the profile channel.
Striscia a luce continua
COB or high-density LED strip producing a line without visible points.
Striscia LED
See "LED strip". Flexible linear circuit with surface-mounted SMD LEDs.
Striscia luminosa a LED
Synonym for LED strip; flexible circuit with LED chips.
Striscia luminosa LED
Synonym for LED strip; flexible circuit with LED chips.
Strobe (effetto)
Rapid flashing of LEDs for scenic or signaling effects.
Stroboscopic effect
Stroboscopic effect caused by LED flicker on moving objects.
Structural bonding
Structural bonding of the LED profile to the surface with high-strength adhesives.
Stucco per cartongesso
Joint compound for finishing the edge between the recessed LED profile and drywall.
Studio dentistico LED
LED lighting for dental practices; high CRI and task lighting.
Studio di fattibilità LED
Preliminary analysis of the technical and economic feasibility of the LED installation.
Studio fotografico LED
LED lighting for photography studios; CRI>95 and controlled CCT.
Studio legale LED
LED lighting for professional offices; comfort and productivity.
Studio medico LED
LED lighting for medical practices; high CRI and health standards.
Studio televisivo LED
LED lighting for TV studios; flicker-free and controlled CCT.
Sub-guide
Additional guide for mounting LED profiles in specialized configurations.
Substrato
Base material on which the printed circuit of the LED strip is built (flexible polyimide or rigid aluminum).
Subtractive color mixing
Subtractive color mixing; used in filters, not in LEDs.
Sunlight spectrum
Spectrum of sunlight; reference for full-spectrum LEDs.
SunLike
Seoul Semiconductor LED technology using violet phosphors for a spectrum similar to natural sunlight.
Sunrise simulation
Dawn simulation with LEDs gradually increasing brightness and CCT.
Sunset simulation
Sunset simulation with LEDs decreasing brightness and CCT.
Superlumen
Commercial term for LED chips with efficiency above the average of their category.
Supermercato LED
LED lighting for supermarkets; food lighting and savings.
Supply chain LED
Supply chain of LED components from manufacturer to installer.
Supply voltage
Supply voltage provided to the LED strip.
Supporto alla progettazione LED
Technical assistance for the design of the LED installation.
Supporto commerciale LED
Assistance in the sales phase of LED products.
Supporto multilingue LED
Technical support available in multiple languages for LED products.
Supporto post vendita LED
Technical support after the purchase and installation of the LED system.
Supporto tecnico LED
Technical support provided by the manufacturer for LED products.
Supporto tecnico specializzato LED
Assistance from experts in LED technology.
Surface brightness
Apparent brightness of the surface of the LED diffuser.
Surface finish
Surface finish of the LED profile (anodized, painted, brushed).
Surface mount profile
LED profile for surface mounting.
Surface temperature
Temperature on the external surface of the LED profile during operation.
Surge protection
Protection against transient overvoltages of the mains; present in the best LED power supplies.
Suspended ceiling
Suspended ceiling; common location for recessed LED profiles.
Suspension bracket
Suspension element for hanging LED profiles from cables or rods.
Suspension cable
Steel cable for suspending LED profiles from the ceiling.
Suspension kit
Complete kit with cables, anchors, and tensioners for suspended LED profiles.
Switching frequency
Switching frequency of the switching power supply; influences size, efficiency, and noise.
Swivel mount
Swivel support for orienting an LED fixture.
Symmetric distribution
Symmetric light distribution relative to the optical axis.
Sync cable
Synchronization cable between master and slave LED controllers.
System efficiency
Overall efficiency of the LED installation: source + driver + optics + thermal.
System integrator
Professional integrating LED components from different suppliers into a functioning system. ↑ Back to top
T
T-bar adapterAdapter for mounting LED profiles in the T-structure of the suspended ceiling.
T-bar ceiling
Suspended ceiling with T-structure for modular LED panels.
T-channel profile
LED profile with T cross-section for bidirectional mounting.
T-connector
T-shaped connector for branches on LED lines.
T-piece connector
T-shaped connector for branching LED strips at 90 degrees.
T-shaped profile
LED profile with T cross-section for double light emission.
T-slot
T-groove in the LED profile for insertion of sliding accessories.
Tab connector
Tongue connector for quick connections on LED strips.
Tab terminal
Tongue terminal for Faston connections on LED power supplies.
Tack solder
Temporary soldering to temporarily fix a component in place.
Tack weld
Spot welding to temporarily fix LED components.
Tail cable
Pre-soldered terminal cable on the LED strip for connection.
Tailored solution
Custom LED solution tailored to specific project requirements.
Tailored spectrum
Custom LED spectrum for specific project requirements.
Tandem wiring
Tandem wiring of two LED fixtures on a single power line.
Tangential fan
Tangential fan for cooling high-power LED fixtures.
Task area
Visual task area requiring a specific LED illuminance level.
Task lamp LED
LED desk lamp for visual task lighting.
Task lighting
Functional LED lighting focused on the work area.
Task/ambient ratio
Ratio between work area illuminance and ambient illuminance.
Tear strength
Tear resistance of the flexible LED strip material.
Technical compliance
Technical compliance of the LED product with project specifications.
Technical data sheet
Document with all LED product specifications.
Technical drawing
Technical drawing with dimensions and tolerances of the LED profile.
Technical support
Technical support provided by the manufacturer for LED system installation.
Teflon cable
Cable with PTFE insulation for high temperatures near high-power LEDs.
Telecommunications closet
Technical cabinet where LED controllers and gateways can be housed.
Telescopic mount
Height-adjustable telescopic support for LED fixtures.
Tempered glass
Toughened glass used for walkable LED profile diffusers.
Tempered glass lens
Tempered glass lens for impact-resistant LED fixtures.
Temperature alarm
Alarm signalling that the temperature limit in the LED system has been exceeded.
Temperature coefficient
Variation of an LED parameter per degree of temperature.
Temperature compensation
Circuit adjusting LED current based on the measured temperature.
Temperature controlled fan
Fan with speed regulated by temperature for high-power LEDs.
Temperature cycle test
Resistance test to repeated thermal shocks.
Temperature derating curves
Curves showing the power reduction of the LED power supply as a function of temperature.
Temperature fuse
Thermal fuse that interrupts the circuit due to overtemperature.
Temperature gradient
Temperature variation along the LED strip; to be minimised.
Temperature limit switch
Thermal switch that turns off the LED when the temperature limit is exceeded.
Temperature mapping
Mapping of the temperature distribution on a functioning LED profile.
Temperature monitoring system
Continuous temperature monitoring system of the LED system.
Temperature probe
Temperature probe for point monitoring of the LED profile.
Temperature range (operating)
Temperature range within which the LED system operates correctly.
Temperature rating
Thermal classification of an LED component according to standards.
Temperature recovery
Recovery time of normal temperature after LED switch-off.
Temperature rise test
Test measuring the temperature increase of the LED system in operation.
Temperature sensor
Integrated temperature sensor for thermal monitoring.
Temperature setpoint
Target temperature for thermal control of the LED system.
Temperature switch
Switch that commutates based on temperature for LED protection.
Temporary lighting
Temporary LED lighting for construction sites, events or emergencies.
Tensile strength
Tensile strength of the materials of LED profiles and cables.
Tensioner (cable)
Device for tensioning the suspension cables of LED profiles.
Tenth-angle
Angle at which LED intensity drops to 10% of maximum; equivalent to field angle.
Terminal block
Terminal block for orderly connection of LED cables.
Terminal block connector
Terminal block with connectors for orderly wiring of the LED system.
Terminal box
Box of terminals for LED system connections.
Terminal cover
Protective cover of the LED power supply terminals.
Terminal identification
Identification of LED power supply terminals: L, N, PE, V+, V−.
Terminal lug
Cable lug for connecting cables to LED power supply terminals.
Terminal marking
Marking of terminals for identification of LED connections.
Terminal screw
Screw of the terminal for fixing cables on the LED power supply.
Terminal strip
Strip of terminals for distributing power supply to multiple LED strips.
Terminal with cable gland
End cap with integrated cable gland seal for IP protection.
Terminal with pre-drilled hole
End cap with a pre-drilled hole for cable passage.
Termination kit
Kit for LED strip termination: end cap, silicone, sleeve.
Termination point
Final point of the LED strip where the circuit closes.
Test bench
Test station for verifying LED strips and power supplies.
Test certificate
Certificate of tests performed on an LED product.
Test equipment
Instrumentation for testing and verification of LED systems.
Test factory (LED)
Quality control of LED products before shipping.
Test jig
Test fixture for quick verification of LED strips in production.
Test lab
Testing laboratory for measuring LED performance.
Test light
Portable LED light for testing and verifying electrical systems.
Test mode
Test mode of the LED controller for diagnostics and verification.
Test point
Access point on the PCB for measuring electrical parameters.
Test procedure
Standardised procedure for testing LED products.
Test protocol
Test protocol with parameters and acceptance criteria for LED products.
Test report
Report of test results performed on an LED product.
Test result
Result of a measurement or verification on an LED component.
Test setup
Configuration of the test bench for measuring LED performance.
Test socket
Test socket for verifying LED chips before mounting.
Test terminal
Terminal for temporary connection during LED system testing.
Tester (instrument)
Generic instrument for verifying electrical and optical LED parameters.
Testing
Functional verification of the LED system after installation.
Testing final (LED)
Final verification of the LED system before delivery to the customer.
Testing frequency
Frequency of periodic tests on the LED system; monthly, quarterly, annual.
Testing functional (LED)
Test of switching on, dimming and LED scene operations.
Texture illumination
LED lighting highlighting the texture of a surface with grazing light.
THD (Total Harmonic Distortion)
Total harmonic distortion introduced by the power supply onto the electrical network; low values indicate better quality.
Theatre LED
LED fixture for theatrical and stage lighting with scenes and advanced dimming.
Thermal adhesive
Thermally conductive adhesive for fixing and heat dissipation.
Thermal adhesive pad
Pre-cut thermally conductive adhesive pad for fixing LED strips.
Thermal aging
Accelerated aging of the LED due to exposure to high temperatures.
Thermal analysis
Thermal analysis of the LED system for verification of operating temperatures.
Thermal barrier
Thermal barrier between the LED strip and heat-sensitive surfaces.
Thermal bridge
Thermal bridge between the LED strip and the profile; to be optimised for dissipation.
Thermal bypass
Alternative path for heat when the main path is obstructed.
Thermal camera
Instrument visualising temperature distribution; used to verify dissipation of LED profiles.
Thermal coefficient of resistance
Variation of LED component resistance with temperature.
Thermal compliance
Thermal compliance of the LED system with specified temperature limits.
Thermal compound
See Thermal paste. Compound for improving thermal contact.
Thermal conductivity
Capacity to conduct heat; aluminium 150–200 W/mK.
Thermal contact resistance
Thermal resistance at the interface between LED strip and profile.
Thermal cycling
Repeated thermal stress that can cause fatigue failures.
Thermal derating table
Derating table of the LED power supply as a function of temperature.
Thermal design
Thermal design of the LED system to ensure long lifespan.
Thermal dissipation
Capacity of the profile or substrate to transfer LED heat to the surrounding environment.
Thermal dissipation rate
Speed of heat dissipation from the LED profile to the environment.
Thermal efficiency
Efficiency of the thermal management of the LED system.
Thermal epoxy
Thermally conductive epoxy adhesive for permanent fixing of LED strips.
Thermal equilibrium
Steady state in which the temperature of the LED system stabilises.
Thermal expansion
Thermal expansion of LED profile materials due to temperature variations.
Thermal foldback
Automatic reduction of LED current when temperature exceeds the threshold.
Thermal gap filler
Material filling the space between LED strip and profile for thermal conduction.
Thermal gradient analysis
Analysis of the temperature gradient along the LED strip.
Thermal grease
See Thermal paste.
Thermal imaging
Thermal detection with thermal camera for diagnostics of the LED system.
Thermal impedance
Resistance to heat flux in dynamic regime (transient).
Thermal insulation (profile)
Thermal insulation between the warm LED profile and heat-sensitive mounting surface.
Thermal insulator
Thermal insulator for protecting heat-sensitive surfaces from LED heat.
Thermal interface material (TIM)
Material (thermal paste, pad, adhesive) interposed between LED strip and profile to improve heat transfer.
Thermal joint
Thermal junction between the LED strip and the heat sink profile.
Thermal limit
Maximum permitted temperature for LED operation.
Thermal load
Thermal load generated by the LED strip and dissipated by the profile.
Thermal management
Overall design of thermal management: profile, TIM, ventilation to ensure long LED lifetime.
Thermal map
Map of the temperature distribution on a functioning LED profile.
Thermal mass
Thermal mass of the LED profile; higher = greater thermal inertia.
Thermal model
Mathematical model or simulation of the thermal distribution in the LED system.
Thermal monitoring
Continuous monitoring of the temperature of the LED system.
Thermal optimization
Optimisation of thermal management to maximise LED lifespan.
Thermal overshoot
Temporary exceeding of the steady-state temperature during the transient.
Thermal pad
Pre-cut thermally conductive sheet inserted between strip and profile bottom; alternative to thermal paste.
Thermal paste
Thermally conductive compound applied between the LED strip and the profile to improve heat transfer.
Thermal path
Path of heat from LED chip to the environment through PCB, TIM and profile.
Thermal performance
Thermal performance of the LED system: resistance, temperature, dissipation.
Thermal profile
Temperature trend over time during LED switch-on.
Thermal protection device
Device that intervenes to protect the LED from overtemperature.
Thermal relief pad
Pad with reduced thermal connection to facilitate soldering on the LED strip.
Thermal resistance (Rth)
Measure of the difficulty with which heat flows from the LED chip to the environment; expressed in °C/W.
Thermal resistance chain
Chain of thermal resistances from LED die to the environment.
Thermal resistance of the profile
Capacity of the LED profile to transfer heat from strip to environment.
Thermal room inspection
Inspection with thermal camera to identify hot spots on the LED profile.
Thermal runaway
Condition of thermal instability in which temperature increase causes greater current absorption, with risk of LED destruction.
Thermal runaway prevention
Measures to prevent thermal instability in the LED system.
Thermal sensor placement
Optimal position of the temperature sensor on the LED profile.
Thermal shutdown recovery
Recovery time after shutdown due to overtemperature of the LED power supply.
Thermal simulation
Computerised simulation of the thermal distribution.
Thermal stability
Ability of the LED system to maintain stable performance as temperature varies.
Thermal stack
Sequence of thermal layers from LED chip to environment: die, substrate, TIM, profile, air.
Thermal stress
Thermal stress on LED components due to temperature variations.
Thermal substrate
Thermally conductive substrate of the LED PCB: aluminium, copper, ceramic.
Thermal tape
Thermally conductive double-sided tape for fixing LED strips to the profile.
Thermal throttling
Automatic reduction of LED performance to maintain temperature.
Thermal transfer area
Contact surface between LED strip and profile for heat transfer.
Thermal vent
Opening for ventilation in the profile or LED fixture.
Thermal via
Metallised hole in the PCB for transferring heat from the upper to the lower layer.
Thermistor
Temperature sensor with resistance variation; for LED thermal protection.
Thermistor NTC
Negative coefficient sensor for LED temperature monitoring.
Thermistor protection circuit
Circuit with thermistor protecting the LED from overtemperature.
Thermistor PTC
Positive coefficient sensor; used as resettable fuse for LEDs.
Thermocouple
Thermocouple for precise temperature measurement of the LED system.
Thermocouple (portable)
Portable instrument for measuring the temperature of the LED profile in operation.
Thermoplastic housing
Thermoplastic enclosure for lightweight and insulating LED fixtures.
Thermoset housing
Thermoset enclosure for heat-resistant LED fixtures.
Thick film resistor
Thick-film resistor on the LED strip for current limitation.
Thick wall profile
LED profile with thick walls for maximum rigidity and dissipation.
Thin client (LED)
Lightweight terminal for remote management of the LED system.
Thin film LED
LED with removed substrate to improve efficiency and dissipation.
Thin profile
LED profile with reduced thickness for ultra-thin installations.
Thin wall profile
LED profile with thin walls for lightness; lower thermal dissipation.
Third-party certification
Certification from an independent body for LED products.
Thread (protocol)
Low-consumption IP mesh protocol for IoT and smart lighting.
Three-channel controller
Controller with three channels for RGB LED strips.
Three-phase dimmer
Dimmer for three-phase systems with large LED loads.
Three-phase power
Three-phase power supply; for large-power industrial LED systems.
Three-pin connector
Three-pin connector for CCT LED strips.
Three-wire dimming
Dimming with three wires: phase, dimmed phase and neutral.
Threshold current
Minimum current required for light emission from the LED.
Threshold dimming level
Minimum dimming level at which the LED still emits visible light.
Threshold voltage
Minimum voltage for LED switch-on; approximately 2–3 V for white LEDs.
Through bolt
Through bolt for fixing LED profiles on metal structures.
Through connector
Through connector for connecting two LED cables with continuity.
Through-wiring
Through wiring; cables pass through the LED fixture to connect the next one.
Throw distance
Distance between the LED fixture and the illuminated surface.
Tilt angle
Tilt angle of a LED fixture relative to the vertical axis.
Tilt mechanism
Tilt mechanism for adjustable LED fixtures.
Tilt sensor
Tilt sensor for LED fixtures detecting angular position.
Tilt switch
Tilt switch that activates/deactivates the LED based on position.
Timber mount
Mounting of LED profiles on wooden structures.
Time clock
Programmable clock for time-based management of LED lighting.
Time delay dimming
Dimming with programmable time delay.
Time delay relay
Time-delay relay for LED switch-on/switch-off delay.
Time lapse (LED)
Time-lapse function of LED brightness to observe gradual variations.
Time-of-flight sensor
Time-of-flight sensor for distance and presence detection for LEDs.
Timed override
Temporary override of the LED programme with automatic return.
Timer
Device programming LED system switch-on and switch-off based on preset times.
Timer function
Timer function of the LED controller for time-based programming.
Timer module
Dedicated timer module for programming LED lighting.
Timer relay
Time-delay relay for controlling LED switch-on/switch-off.
Timer smart LED
Programmable timer in the smart app for LED lighting automation.
Timing diagram
Time diagram of the PWM signal or LED control protocol.
Tin coating
Tinning of the LED strip soldering pads to prevent oxidation.
Tin lead solder
Tin-lead solder; non-RoHS compliant, replaced by lead-free.
Tin plated connector
Tinned connector for good solderability and corrosion resistance.
Tin plating
Tinning of contacts to prevent oxidation and facilitate soldering.
Tint
Chromatic shade; small deviation from pure white in the LED.
TIR optic module
Interchangeable TIR optical module for LED fixtures.
Titanium dioxide
Titanium dioxide used as white pigment in opal LED diffusers.
Titanium finish
Titanium colour finish on LED profiles; modern and resistant aesthetics.
Tj max
Maximum permitted junction temperature of the LED; exceeding it causes irreversible degradation.
TM-21
IES standard projecting LM-80 data to estimate the useful lifetime of LEDs beyond the test period.
TM-21 projection
Projection of the LED useful lifetime based on LM-80 data.
TM-30
Advanced colour rendering evaluation method (IES) with 99 colour samples; more complete than traditional CRI.
TM-30 report
Complete TM-30 colour rendering report with Rf and Rg values.
Toggle action
Switch-on/switch-off action with a single button for LED.
Toggle switch
Lever switch for manual on/off control of the LED.
Toilet LED
LED lighting for toilets; IP44 and high CRI.
Tolerance band
Tolerance band on the parameters of the LED product.
Tone mapping
Tonal mapping for the conversion of HDR colours on LED displays.
Tool-free connector
Connector requiring no tools for installation.
Tool-free installation
Installation of the LED profile without need for tools.
Tool-free mounting
Mounting system for LED profile without need for tools.
Tooling cost
Cost of moulds and dies for customised LED profiles.
Top entry connector
Connector with top cable input for ceiling-mounted installations.
Top hat profile
LED profile with omega cross-section for DIN rail mounting.
Top mount
Mounting of the LED profile on the upper surface of an element.
Top-emitting LED
LED emitting from the upper face; standard configuration.
Torque specification
Recommended tightening torque for LED profile fixing screws.
Total cost of ownership (TCO)
Total cost of ownership of the LED system including purchase, installation, energy and maintenance.
Total flux
Total luminous flux emitted from an LED source in all directions.
Total harmonic current
Total harmonic current generated by the power supply on the network.
Total luminous flux
Total luminous flux emitted by the complete LED fixture.
Total system power
Total power of the LED system including driver and losses.
Total wattage
Overall power of all LED strips connected in the system.
Touch dimming speed
Speed of brightness variation during touch on the capacitive dimmer.
Touch pad
Touch-sensitive surface on a wall-mounted LED controller.
Touch panel controller
LED controller with touchscreen panel for advanced management.
Touch sensor module
Touch sensor module to integrate in LED profiles.
Touch switch
Touch switch for LED switching on.
Touchless control
LED control without contact via proximity sensors or gestures.
Toxicity (LED materials)
Absence of toxic materials in modern LED products; RoHS compliance.
Track adapter
Adapter for mounting LED fixtures on existing electrified tracks.
Track connector
Connector for joining sections of electrified LED track.
Track curved
Bendable LED track for following architectural shapes.
Track electrified
Linear power supply system for adjustable LED spotlights.
Track end cap
End cap of the electrified LED track.
Track end feed
Power supply of the LED track from the end.
Track feed point
Power supply point of the electrified LED track.
Track joiner
Joint for connecting two sections of LED track.
Track length
Length of the electrified LED track.
Track lighting
Lighting on electrified track with adjustable LED spotlights.
Track lighting system
Complete system of electrified track with LED spotlights.
Track magnetic LED
Track with magnetic fixing system for LED spotlights.
Track power capacity
Maximum power capacity of the electrified LED track.
Track recessed
Recessed electrified LED track in the ceiling; flush-to-flush.
Track shipment tracking (LED)
Monitoring the position of the LED parcel during transport.
Track smart LED
Electrified track with integrated wireless control for LED spotlights.
Track spotlight
LED spotlight mounted on electrified track.
Track system accessories
Accessories for LED track: connectors, curves, end caps, adapters.
Track three-phase
LED track with three independent circuits for different spotlight groups.
Trace impedance
Impedance of the PCB tracks of the LED strip.
Trace resistance
Electrical resistance of copper tracks on the LED strip PCB.
Trace width design
PCB track width design for current and dissipation.
Traceability LED
System for tracking LED products from production to installation.
Traffic light controller
Controller for LED traffic lights with phase and timing management.
Traffic light LED
LED traffic light; technology using high-power chips in parallel.
Trailing edge (dimming)
Descending phase cutting; more compatible with LEDs than leading edge.
Trailing edge compatibility
Compatibility of the LED driver with trailing edge dimmers (MOSFET/IGBT).
Training (LED)
Training courses for installers and designers of LED systems.
Training continuous LED
Constant professional update on LED technology news.
Training for LED designers
Technical courses for professionals on LED design.
Training for LED installers
Technical courses for professionals on LED system installation.
Tram LED
LED lighting for trams and rail vehicles.
Transconductance amplifier
Transconductance amplifier in LED control circuits.
Transfer function
Transfer function of the LED system: input-output relationship.
Transformer (for LED)
See Power supply. Voltage conversion device.
Transformer electronic
High-frequency transformer for halogen; not always compatible with LEDs.
Transformer isolation
Galvanic insulation of the transformer in the LED power supply.
Transformer planar
Low-profile transformer for compact LED drivers.
Transformer ratio
Transformation ratio in the LED switching power supply.
Transformer temperature
Operating temperature of the transformer in the LED power supply.
Transformer toroidal
Linear transformer with toroidal core; rarely used for LEDs.
Transient overvoltage
Transient mains overvoltage that can damage the LED.
Transient protection
Protection against transient voltage peaks on the electrical network.
Transient response
Response of the LED driver to rapid load variations.
Transient suppressor
Transient suppressor for protection of LED circuits.
Transient voltage suppressor (TVS)
Component absorbing voltage peaks to protect the LED.
Translucent material
Material letting light through in a diffused manner; for LED diffusers.
Translucent panel
Translucent panel backlit with LED strip.
Transmittance
Percentage of light passing through a material (diffuser); an opal diffuser has approximately 70% transmittance, a transparent one approximately 95%.
Transmittance diffuser frosted
Percentage of light passing through the frosted diffuser; typically 80–85%.
Transmittance diffuser opal
Percentage of light passing through the opal diffuser; typically 65–75%.
Transmittance diffuser transparent
Percentage of light passing through the transparent diffuser; typically 92–95%.
Transmission loss
Loss of luminous flux through the diffuser or lens.
Transparency
Degree of transparency of the LED diffuser; transparent, frosted, opal.
Transparent material
Material letting light through without diffusion.
Transport of LED products
Handling and shipping of LED products with adequate packaging.
Transport packaging
Packaging for safe transport of LED profiles and strips.
Trap door access
Access hatch for maintenance of LED power supplies in the suspended ceiling.
Tray
Container for transport and storage of LED components.
Tread light
LED light integrated in the stair tread for staircase lighting.
Tree mount LED
LED fixture for mounting on trees in landscape lighting.
Trellis lighting
LED lighting of pergolas and garden trellises.
Trend lighting
Current trends in LED lighting: linear, minimal, smart, circadian.
Tri-color LED
LED with three dies of different colours (RGB) in the same package.
Tri-proof fixture
LED fixture resistant to water, dust and impacts (IP65-IK08); for industrial environments and car parks.
TRIAC
Semiconductor component used in phase-cut dimmers for brightness adjustment.
Triangular profile
LED profile with triangular cross-section for angles and edges.
Trick dimming
Technique for tricking a dimmer that requires a minimum load higher than an LED load.
Trigger device
Device activating an event in the LED system: sensor, button, timer.
Trigger input
Input of the LED controller for external activation signals.
Trigger level
Threshold level for activation of the sensor in the LED system.
Trigger mode
Activation mode: continuous, pulsed, delayed, cyclic.
Trim (finishing)
Visible finishing element of a recessed LED fixture.
Trim adapter
Adapter for mounting different finishes on a LED fixture.
Trim colour
Colour of the visible frame of a recessed LED fixture.
Trim level
Finish level of a LED profile: standard, premium, custom.
Trim ring
Decorative ring covering the edge of a recessed LED downlight.
Trim style
Style of the visible edge of a recessed LED fixture.
Trimless housing
Housing for LED downlight without visible frame.
Trimless installation
LED installation recessed without visible edge; perfectly flush.
Trimmer potentiometer
Fine-adjustment potentiometer on the LED driver board.
Triple insulated wire
Wire with triple insulation for maximum safety in the LED driver.
Triple insulation
Triple electrical insulation for maximum safety in the LED driver.
Troffer
Rectangular recessed LED fixture for modular suspended ceilings.
Troffer ceiling mount
Ceiling mounting of troffer-type LED fixtures for modular suspended ceilings.
Tropical climate rated
LED fixture certified for operation in tropical climates.
Trough fitting
Trough LED fixture for industrial linear lighting.
True colour rendering
Excellent colour rendering reproducing colours with maximum fidelity.
True white
Pure white at 4000 K without chromatic cast.
Trunnion mount
Adjustable U-bracket for outdoor LED projectors.
Truss mount
Mounting of LED fixtures on trusses and rigs for events.
Trust mark
Certification mark ensuring the quality of the LED product.
TTL signal
TTL logic signal (0–5 V) used in some digital LED controllers.
Tube clamp
Clamp for fixing LED neon flex on tubular structures.
Tube fitting
Tubular LED fixture for replacing fluorescent tubes.
Tube guard
Polycarbonate protection for LED tubes in industrial environments.
Tube mount bracket
Bracket for mounting LED tubes on surfaces.
Tumble test
Drop test to verify the mechanical resistance of LED fixtures.
Tunable white
LED strip with adjustable colour temperature from warm to cool.
Tundra white
Very cool colour temperature (>6500 K); for special applications.
Tungsten equivalent
Equivalent tungsten power of an LED source.
Tungsten halogen replacement
Replacement of tungsten halogen lamps with LED sources.
Tunnel entrance lighting
Specific LED lighting for tunnel entrances with light transition zone.
Tunnel exit lighting
LED lighting for tunnel exits with adaptation to daylight.
Tunnel interior lighting
LED lighting for the inner zones of tunnels.
Tunnel lighting
Specific LED lighting for road tunnels.
Turbidity sensor
Turbidity sensor for LEDs in water treatment systems.
Turn signal LED
LED direction indicator for vehicles.
Turn-on time
Time required for the LED to reach full flux; practically instantaneous.
Turnkey solution
Turnkey LED solution: design, supply, installation, testing.
Turtle-friendly LED
Coastal LED lighting with amber spectrum that does not disturb sea turtles.
Tutorial installation LED
Video or written guide for mounting the LED system.
Tuya Smart app
Tuya application for controlling Wi-Fi LED devices.
Twilight function
Twilight function of the light sensor for automatic LED switch-on.
Twilight sensor
Device detecting the natural light level and commanding automatic LED switch-on/switch-off.
Twist connector
Twist connector for quick cable joints in LED systems.
Twist lock
Rotation lock for fixing LED fixtures on tracks.
Twisted pair cable
Twisted pair cable for DMX and DALI signals.
Two-channel controller
Controller with two channels for CCT LED strips (warm white + cool white).
Two-circuit track
Electrified track with two independent circuits for LEDs.
Two-pin connector
Two-pin connector for monochromatic LED strips.
Two-stage dimming
Dimming in two stages: full brightness and reduced level.
Two-wire connection
Two-wire connection for monochromatic LED strips (+ and −).
Two-wire dimming
Two-wire dimming (phase and return) without neutral; for TRIAC.
Type approval
Type approval for LED products according to applicable regulations.
Type designation
Type designation of the LED product in the manufacturer's catalogue.
Type test
Type test performed on a representative sample for LED certification.
TÜV certification
Safety certification issued by the German body TÜV for lighting fixtures and power supplies.
↑ Back to top
U
U-bolt mountMounting with U-bolt for LED profiles on pipes.
U-channel profile
LED profile with open U cross-section at the top.
U-shaped bracket
U-shaped bracket for fixing LED fixtures.
U-shaped profile
LED profile with U cross-section for strip and diffuser.
UART
Asynchronous serial interface used in some LED controllers for communication.
UFO high bay
Disc-shaped industrial LED high bay for high ceilings.
UGR (Unified Glare Rating)
Unified glare index on a scale of 10–30; values ≤19 for offices, ≤22 for industrial areas.
UGR 16
Very low UGR value for environments with high visual requirements such as drawing rooms.
UGR 19
Standard UGR value for offices and work environments with LEDs.
UGR 22
Acceptable UGR value for industrial and commercial environments with LEDs.
UGR 25
Maximum UGR value for corridors and transit zones with LEDs.
UGR 28
Acceptable UGR value for environments with low visual requirements.
UGR (detailed calculation)
Calculation of the Unified Glare Rating based on position, luminance and angle of the LED.
UL 8750
UL standard specific for LED fixtures and components.
UL certification
UL safety certification for the North American LED product market.
UL compliance test
UL compliance test for LED products.
UL listed
LED product included in the UL list as compliant with safety standards.
UL recognized
UL-recognised LED component for use in certified fixtures.
UL safety mark
UL safety mark affixed to certified LED products.
UL testing laboratory
Authorised UL laboratory for LED safety testing.
UL (Underwriters Laboratories)
American safety certification body for electrical products, including LEDs and power supplies.
Ultra compact driver
Ultra-compact LED driver for minimal spaces.
Ultra flat downlight
LED downlight with extremely reduced thickness.
Ultra high CRI LED
LED with CRI above 97; for critical applications.
Ultra high density COB
COB strip with density above 512 LEDs/m.
Ultra high efficiency driver
LED driver with efficiency above 97%.
Ultra low power standby
LED power supply with standby consumption below 0.1 W.
Ultra narrow strip
LED strip with width below 4 mm.
Ultra short throw LED
Ultra-short throw LED projector for close-range installation.
Ultra thin diffuser
LED diffuser with very reduced thickness for ultra-slim profiles.
Ultra thin PCB
LED strip PCB with reduced thickness for minimal installations.
Ultra-efficient LED
LED with luminous efficacy above 200 lm/W.
Ultra-low power LED
Extremely low-consumption LED for indicators and signage.
Ultra-narrow beam
Extremely narrow LED beam (below 10 degrees).
Ultra-slim profile
LED profile with height below 7 mm.
Ultra-thin strip
LED strip with reduced PCB thickness for minimal installations.
Ultra-warm white (2200 K)
Very warm colour temperature for intimate environments.
Ultraviolet curing LED
UV LED for curing adhesives and inks.
Ultraviolet (UV)
Radiation below 400 nm; UV LEDs are used for sterilisation, curing and special applications.
Umbrella bracket
Bracket for mounting LEDs under parasols and sunshades.
Umbrella light LED
LED light integrated in a parasol for outdoor table lighting.
Umbrella reflector
Umbrella-shaped reflector for distributing LED light broadly and uniformly.
Under bench LED
LED lighting under workbenches.
Under bridge LED
LED lighting under bridges and viaducts.
Under cabinet connector
Specific connector for under-cabinet kitchen LED strips.
Under cabinet kit
Complete kit for under-cabinet LED lighting.
Under cabinet profile
LED profile specific for under-cabinet mounting.
Under counter LED strip
LED strip for under-counter lighting.
Under deck LED
LED lighting under terraces and decking.
Under eave LED
LED lighting under the roof eave.
Under handrail LED
LED strip under the handrail for staircase lighting.
Under shelf LED
LED lighting mounted under shelves to enhance displayed objects.
Under shelf profile
LED profile for under-shelf mounting.
Under stair LED
LED lighting under stairs for decorative effect.
Under-cabinet application
LEDs for under-cabinet and tall furniture lighting; typical in kitchens and closets.
Under-cabinet LED
LED lighting mounted under kitchen cabinets for the work surface.
Under-cabinet light
Under-cabinet LED light; for kitchen work surfaces.
Under-counter light
Under-counter LED light; for service area lighting.
Underdrive
Driving the LED at a current below the nominal value; extends lifetime at the expense of brightness.
Underground cable
Buriable cable for powering outdoor garden LED systems.
Underground junction box
Buriable junction box for outdoor LED systems.
Underlighting
Lighting from below directed upwards for decorative effect.
Underlit effect
Upward lighting effect for enhancing objects and furnishings.
Undershelf lighting
LED lighting under shelves for enhancing displayed objects.
Underwater cable
Underwater cable for LED systems in pools and fountains.
Underwater connector
IP68 underwater connector for LED joints in pools and fountains.
Underwater control box
Underwater control box for pool LEDs.
Underwater fixture
LED fixture designed for permanent immersion.
Underwater housing
IP68 underwater enclosure for LED fixtures.
Underwater installation
Installation of LED strips and fixtures in underwater environments.
Underwater junction box
Underwater junction box for LED systems.
Underwater LED
Strip or LED fixture for underwater applications (IP68).
Underwater spotlight
Underwater LED spotlight for pools and fountains.
Uni-color strip
Monochromatic single-colour LED strip.
Uni-directional connector
Connector that inserts in one direction only to prevent errors.
Unidirectional light
LED light emitted in a single direction; high efficiency in targeted lighting.
Unified control
Unified control of different types of LED fixtures from a single system.
Unified glare rating limit
UGR limit value for visual comfort: 19 for offices, 22 for industry.
Uniform beam
LED beam with uniform distribution of intensity.
Uniform brightness
Uniform brightness across the entire LED diffuser surface.
Uniform colour
Uniform colour along the entire LED strip; guaranteed by binning.
Uniform colour space
Perceptually uniform colour space; CIE 1976 is more uniform than CIE 1931.
Uniform distribution
Light distribution ensuring uniformity across the entire illuminated surface.
Uniform heating
Uniform heating of the LED profile along its entire length.
Uniform illuminance design
LED project ensuring uniform illuminance on the target surface.
Uniform light output
Uniform luminous flux along the entire LED strip.
Uniform spacing
Uniform spacing between LED fixtures for constant illuminance.
Uniformity
Ratio between the minimum and average (or maximum) illuminance value on a surface; quality index.
Uniformity between LED fixtures
Consistency of brightness and colour between different LED fixtures from the same batch.
Uniformity chromatic
Consistency of the colour emitted along the entire LED strip or between multiple fixtures; guaranteed by tight binning.
Uniformity chromatic strip
Consistency of colour along the LED strip and between different batches.
Uniformity luminous strip
Consistency of brightness along the entire LED strip.
Uniformity of illuminance
Ratio between minimum and average illuminance on the surface; target >0.6.
Uniformity of the line of light
Absence of brightness variations along the LED profile.
Uninterruptible power supply LED
Uninterruptible power supply ensuring LED lighting without interruptions.
Unit cost
Unit cost of the LED product for budget calculation.
Universal bracket
Universal mounting bracket adaptable to different LED profile models.
Universal connector
Universal connector compatible with different LED strips.
Universal dimmer
Dimmer compatible with LEDs, halogens and incandescents.
Universal driver
LED driver compatible with a wide range of voltages and currents.
Universal driver compatibility
Compatibility of the LED driver with different dimming protocols.
Universal input
Power supply with universal input (100–277 V AC); for international markets.
Universal input driver
LED driver with universal input 100–277 V AC for global markets.
Universal mount
Mounting system adaptable to different surfaces and configurations.
Universal mounting plate
Universal mounting plate for different LED power supplies.
Universal remote
Programmable universal remote control for different LED systems.
Universal sensor
Universal sensor compatible with different LED control systems.
University application
LEDs for university campuses; smart lighting and energy efficiency.
University LED
LED lighting for university campuses; smart and efficient.
DMX universe
Set of 512 DMX channels managed from a single connection; large installations use multiple universes.
Unregulated power supply
Power supply without output regulation; not suitable for LEDs.
Unshielded cable
Cable without shielding; for LED power supply in non-disturbed environments.
Unshielded twisted pair
UTP cable for low-interference LED control signals.
Up/down light fixture
Bidirectional LED fixture with emission both upwards and downwards.
Update firmware
Procedure for updating the firmware of the LED controller.
Update notification
Notification of firmware update available for the LED controller.
Update of the LED catalogue
New edition of the catalogue with updated LED products.
Update of the LED firmware
New version of the LED controller software with improved functionality.
Update technological LED
Replacement of obsolete LED components with more efficient versions.
Upgrade kit
Kit for the technological upgrade of the existing LED system.
Upgrade path
Technological upgrade path for the existing LED system.
Uplight
LED lighting directed upwards; for indirect light reflected from the ceiling.
Uplight fixture
LED fixture directing light upwards.
Upper flux ratio (ULOR)
Ratio of flux directed upwards; to be minimised to reduce light pollution.
Upper hemisphere flux
Luminous flux emitted in the upper hemisphere of the LED fixture.
UPS (for LED)
Uninterruptible power supply ensuring LED lighting during blackouts.
Upward flux ratio
Percentage of light emitted upwards; to be minimised to reduce light pollution.
Upward light output
Luminous flux emitted upwards by the LED fixture.
Urban design LED
LED lighting for urban design: squares, streets, parks.
Urban furniture LED
LED lighting integrated in urban furniture: benches, planters, bollards.
Urban LED master plan
Master plan for urban LED lighting.
Urban lighting
LED lighting for public urban spaces.
Urban renewal LED
LED lighting for urban regeneration projects.
Usable light
Luminous flux actually useful after system losses.
USB (power supply via)
5 V DC power supply via USB port; used for small decorative or test LED strips.
USB LED controller
LED controller with USB interface for configuration from PC.
USB power adapter
USB adapter for powering small decorative LED strips.
USB Type-C powered LED
LED strip powered via USB-C port.
User experience (UX)
User experience with the LED lighting control system.
User friendly interface
Intuitive interface for controlling LED lighting.
User group
Group of users with specific permissions in the LED control system.
User interface
User interface of the LED controller: app, remote control, panel.
User manual
User manual of the LED product with installation and configuration instructions.
User manual download
Download of the LED product user manual from the manufacturer's website.
User preference setting
Setting of user lighting preferences in the LED system.
User preset
Custom setting saved by the user in the LED controller.
User profile
User profile with personalised preferences in the LED system.
User training
Training of the end user for using the LED system.
Utility area LED
LED lighting for service areas and technical rooms.
Utility box
Service cabinet for power supplies and LED controllers.
Utility grade LED
Base-level LED product for functional applications.
Utility lighting
Functional LED lighting for service and technical areas.
Utility pole LED
LED fixture mounted on utility poles for street lighting.
Utility room LED
LED lighting for laundry rooms and service areas.
UV aging resistance
Resistance to UV-ray aging of LED profile materials.
UV aging test
Accelerated aging test with UV exposure for diffusers and profiles.
UV blocking diffuser
Diffuser blocking the UV component of LED light.
UV cured adhesive
Adhesive cured with UV LED light for quick bonding.
UV curing system
UV LED system for quick curing of photosensitive materials.
UV degradation
Degradation of plastic materials due to prolonged UV exposure.
UV degradation resistance
Resistance to UV degradation of LED system materials.
UV disinfection LED
UV-C LED system for disinfection of surfaces and air.
UV emission (white LED)
Residual UV component in white LEDs; negligible in quality LEDs.
UV exposure test
Accelerated UV exposure test to verify resistance of the LED diffuser.
UV filter
Filter blocking the ultraviolet component in the LED diffuser.
UV LED application
Application of UV LED technology: curing, sterilisation, fluorescence.
UV LED curing lamp
UV LED lamp for curing gels, resins and inks.
UV LED power
Power of the UV LED expressed in milliwatts for the specific application.
UV LED wavelength selection
Choice of UV LED wavelength for the application: 365, 385, 395, 405 nm.
UV protection rating
Classification of the UV protection of the LED diffuser.
UV resistant material
UV-resistant material for outdoor LED profiles and diffusers.
UV stabilizer
Additive protecting diffuser material from UV degradation.
UV stable diffuser
LED diffuser with UV stabilisers for outdoor use without yellowing.
UV stable silicone
UV-resistant silicone for sleeves and sealants in outdoor LED systems.
UV-A LED
Long-wave ultraviolet LED (315–400 nm); used for fluorescent effects, curing and insect traps.
UV-B LED
Medium-wave UV LED (280–315 nm); medical and phototherapy applications.
UV-C LED
Short-wave ultraviolet LED (200–280 nm); for disinfection and sanitisation applications.
↑ Back to top
V
V-cut profileLED profile with V cross-section for internal 90-degree angles.
V-groove cutting
V-cut in wood or aluminium for insertion of corner LED profile.
V-shape diffuser
Diffuser with V cross-section for corner profiles.
V-shaped light
V-shaped light distribution obtained with corner LED profiles.
Vacancy sensor
Sensor that switches off LEDs when no people are detected; more restrictive than an occupancy sensor.
Vacuum coating
Vacuum coating for deposition of reflective films on LED profiles.
Vacuum metallizing
Vacuum deposition of metallic film for LED reflectors.
Vacuum test
Vacuum test for verifying the seal of sealed LED components.
Valet lighting
LED lighting for cloakroom and changing room areas.
Validation test
Validation test of LED product performance.
Valley lighting
LED lighting of architectural valleys between two roof pitches.
Valley profile
LED profile for installation in architectural valleys between two roof pitches.
Value added LED
Additional benefit offered by LED technology compared to alternatives.
Value engineering
Optimisation of the LED project to maximise performance while minimising costs.
Value UGR LED
Numerical glare index produced by the LED fixture.
Valve controlled LED
LED controlled by an optical shutter for beam adjustment.
Valve dimmer
Dimmer with HVAC interface for coordinating lighting and climate control.
Vandal resistant bracket
Anti-vandal bracket for LED profiles in public spaces.
Vandal resistant connector
Anti-tamper connector for public LED systems.
Vandal resistant fastener
Anti-tamper fixing with special screws for public LEDs.
Vandal resistant profile
Reinforced LED profile with IK10 protection for public spaces.
Vandal-proof
LED fixture resistant to acts of vandalism; high IK protection rating.
Vanity LED mirror
Mirror with perimeter LED lighting for make-up and personal care.
Vanity light
LED light for bathroom or toilet mirror; face illumination.
Advantages of LED light
Efficiency, lifespan, light quality, dimmability, absence of UV and mercury.
Advantages of LED profile
Thermal dissipation, strip protection, aesthetic finish, uniform distribution.
Advantages of LED strip
Flexibility, compactness, ease of cutting and installation, variety of CCT and colours.
Vapor barrier
Moisture barrier to prevent condensation on LED profiles.
Vapor barrier tape
Moisture barrier tape for protecting LED profiles from humidity.
Vapor proof fixture
Vapour-tight LED fixture for damp industrial environments.
Vapor tight
Vapour-tight LED fixture for damp industrial environments.
Vapor tight enclosure
Vapour-tight enclosure for LED power supplies.
Variable beam fixture
LED fixture with adjustable beam angle.
Variable beam LED
LED fixture with adjustable beam angle via movable optics.
Variable CCT controller
Controller for adjusting LED colour temperature.
Variable CCT strip
LED strip with adjustable CCT from warm to cool.
Variable colour temperature
See Tunable white. Adjustable CCT.
Variable current driver
LED driver with adjustable output current.
Variable geometry optic
LED optics with variable geometry for customised distributions.
Variable intensity
Adjustable LED luminous intensity via dimming.
Variable output driver
LED driver with adjustable output current or voltage.
Variable output voltage
Adjustable output voltage of the LED power supply.
Variable speed chase
Chase effect on addressable LED strips with adjustable speed.
Variable speed effect
Dynamic effect on addressable LED strips with adjustable speed.
Varistor (MOV)
Metal oxide varistor for surge protection of the LED driver.
Vault LED fixture
LED fixture for vaults and security rooms.
Vault lighting
LED lighting for armoured rooms and bank vaults.
Vehicle mounted LED
LED lighting mounted on vehicles for construction sites and emergencies.
Velcro mount
Velcro fixing for removable and repositionable LED strips.
Vending machine LED
LED lighting for vending machines.
Vendor qualification
Qualification of LED component suppliers to guarantee quality.
Venetian blind LED
LED lighting integrated in venetian blind slats.
Vent hole
Ventilation hole in the LED profile or fixture for heat dissipation.
Ventilated ceiling LED
Ventilated suspended ceiling with integrated LED profiles.
Ventilated enclosure
Ventilated enclosure for LED power supplies with ventilation grilles.
Ventilated profile
LED profile with openings for ventilation and thermal dissipation.
Ventilation accessory
Element that promotes airflow inside the LED profile for thermal dissipation.
Ventilation gap
Ventilation space between the LED profile and the surface for thermal dissipation.
Ventilation passive
Heat dissipation without fans, by natural convection only; typical of well-sized LED profiles.
Ventilation slot
Slot in the LED profile for facilitating air convection.
Veranda LED
LED lighting for verandas; IP44 and integration with furniture.
Verification electrical (LED system)
Control of the LED system with electrical measuring instruments.
Verification functional (LED)
Test of switching on and dimming of the LED system.
Verification illuminance (LED)
Lux meter measurement of the illuminance produced by the LED system.
Verification of compliance (LED)
Check that the LED system meets the project specifications.
Verification of consumption (LED)
Measurement of the actual consumption of the LED system after installation.
Verification of flux (LED)
Measurement of the actual luminous flux of the installed LED system.
Verification of safety (LED)
Electrical safety test of the LED system after installation.
Verification of uniformity (LED)
Measurement of illuminance uniformity on the target surface.
Verification post-installation (LED)
Periodic control of the performance of the installed LED system.
Verification pre-installation (LED)
Control of LED materials before mounting.
Verification thermal (LED profile)
Control of the temperature of the LED profile in operation.
Verification test
Performance verification test of the LED after installation.
Vertical beam angle
Vertical opening angle of the LED beam.
Vertical beam spread
Vertical distribution of the LED beam.
Vertical cove
Vertical cove with LED strip for lighting walls and columns.
Vertical downlight
LED downlight with beam directed vertically downwards.
Vertical garden LED
LED lighting for vertical gardens and green walls.
Vertical illuminance
Illuminance measured on a vertical plane.
Vertical mounting
Vertical mounting of the LED profile on a wall.
Vertical pendant
Vertically oriented suspended LED profile.
Vertical profile
LED profile mounted vertically on a wall.
Vertical wall slot
Vertical slot in the wall for a recessed LED profile.
Very-high density strip
LED strip with over 240 LEDs/m for absolute uniformity.
VHB (3M Very High Bond)
3M acrylic very-high-adhesion double-sided tape for professional mounting of LED strips on smooth surfaces.
Vibration dampener
Vibration damper for LED profiles in industrial environments.
Vibration damper mount
Anti-vibration mounting for industrial LEDs.
Vibration isolation
Isolation from vibrations for LED fixtures in industrial environments.
Vibration proof connector
Anti-vibration connector for LED systems in industrial environments.
Vibration resistance
Resistance of the LED system to mechanical vibrations.
Vibration sensor LED
Vibration sensor for structural monitoring with LED signalling.
Vibration test
Vibration resistance test for LED fixtures.
Vibration test standard
Standard for vibration resistance testing of LED fixtures.
Video conference LED
LED lighting optimised for video conferences; frontal, soft, high CRI.
Video mapping LED
Projection of video content on surfaces via addressable strips.
Video wall LED
High-resolution video wall composed of LED modules.
Viewable angle
Angle within which the content of a LED display is visible.
Viewing angle
Angle within which the LED source is visible; for displays and signage.
Vinyl wrap profile
LED profile wrapped in vinyl film for custom finish.
Virtual commissioning
Virtual commissioning of the LED system via simulation software.
Virtual reality LED
LED lighting for virtual and immersive reality environments.
Virtual sunrise/sunset
LED simulation of sunrise and sunset for Human Centric Lighting.
Visibility distance
Distance at which a LED signal is visible under specific conditions.
Visible light communication (VLC)
See LiFi. Communication via visible LED light.
Visible light LED
LED emitting in the visible spectrum (380–780 nm).
Visible spectrum
Visible portion of the electromagnetic spectrum (380–780 nm).
Visual acuity
Visual acuity; influenced by the quality of LED lighting.
Visual alert LED
Flashing LED visual alarm for event signalling.
Visual comfort probability (VCP)
Probability of visual comfort; metric for evaluating glare.
Visual comfort zone
Zone of visual comfort with optimal LED lighting.
Visual display lighting
LED lighting for displays and information screens.
Visual display unit (VDU)
Video terminal; LED lighting must avoid reflections on the screen.
Visual field
Visual field of the observer; LED lighting must take it into account in the design.
Visual indicator LED
Visual LED indicator for device status.
Visual inspection
Visual inspection of LED components for quality control.
Visual inspection guide
Guide to visual inspection of LED products for quality control.
Visual merchandise LED
LED lighting for visual merchandising in retail.
Visual performance
Visual performance guaranteed by adequate LED lighting.
Visual task
Visual task determining the required LED illuminance level.
Visual uniformity
Perceived uniformity of light on a surface illuminated by LEDs.
Voice activation
Activation of LED lighting via voice command.
Voice control integration
Integration of voice control in the LED lighting system.
Voice controlled dimming
Dimming of LED lighting via voice commands.
Voice controlled scene
Recall of LED lighting scenes via voice commands.
Volt (V)
Unit of measurement for electrical voltage; LED strips operate typically at 5 V, 12 V, 24 V or 48 V DC.
Volt-ampere (VA)
Unit of apparent power; relevant for sizing protection devices for LED systems.
Voltage adjustment screw
Output voltage adjustment screw on the LED power supply.
Voltage booster
Voltage booster to compensate for drop along long LED strips.
Voltage compatibility
Compatibility between power supply voltage and LED strip voltage.
Voltage compensation
Compensation of the voltage drop along the LED strip.
Voltage converter
Voltage converter for adapting the power supply to the LED system.
Voltage detection relay
Relay detecting voltage for LED system protection.
Voltage disconnect relay
Relay disconnecting the LED load in case of abnormal voltage.
Voltage distribution
Voltage distribution along the LED strip; drops towards the far end.
Voltage divider
Voltage divider used in sensing circuits for LEDs.
Voltage doubler
Voltage doubler in special LED power supply circuits.
Voltage drop
Progressive reduction of voltage along the LED strip with distance from the power supply; causes non-uniformity.
Voltage drop 12 V
Voltage reduction problem on 12 V LED strips over long runs.
Voltage drop 24 V
Voltage reduction on 24 V LED strips; less critical than 12 V.
Voltage drop 48 V
Minimal voltage reduction on 48 V LED strips; for very long runs.
Voltage drop acceptable
Maximum acceptable percentage reduction; typically 5%.
Voltage fluctuation
Mains voltage fluctuation that can cause LED brightness variations.
Voltage forward (Vf)
Voltage drop across the LED in conduction; typically 2.8–3.3 V for white LEDs.
Voltage imbalance
Voltage imbalance between channels of a multi-output LED power supply.
Voltage measurement
Measurement of voltage in the LED circuit with a voltmeter.
Voltage monitor
Voltage monitor for surveillance of the LED power supply.
Voltage multiplier
Voltage multiplier in special LED power supply circuits.
Voltage of breakdown
Voltage at which an LED component fails; protection limit.
Voltage of mains
Domestic mains voltage; in Europe 230 V AC, 50 Hz.
Voltage of mains for LED
Domestic mains voltage converted to DC for the LED strip.
Voltage of output (power supply)
Voltage delivered by the LED power supply; must match the strip requirement.
Voltage of strip power supply
Nominal voltage of the LED strip: 5 V, 12 V, 24 V or 48 V DC.
Voltage of threshold LED
Minimum voltage for LED switch-on; approximately 2–3 V for white LEDs.
Voltage range
Operating voltage range of the power supply or LED strip.
Voltage reference
Reference voltage in the LED driver control circuit.
Voltage regulator
Circuit stabilising voltage for the LED.
Voltage regulator IC
Integrated circuit voltage regulator for LED modules.
Voltage sensor
Voltage sensor for monitoring the LED circuit.
Voltage source
Voltage source; the constant-voltage power supply for LED strips.
Voltage spike
Transient voltage peak that can damage LEDs; surge protection required.
Voltage stabilizer
Voltage stabiliser protecting LEDs from mains fluctuations.
Voltage tolerance
Tolerance on the output voltage of the LED power supply.
Voltmeter
Instrument for measuring voltage in the LED circuit.
Volume control (lighting design)
Management of LED light in relation to the architectural volume of the space.
Volumetric lighting
LED lighting filling an architectural volume uniformly.
Vortex cooling
Vortex air cooling for very-high-power LEDs in special applications.
↑ Back to top
W
W-beam mountMounting on double-T beam for industrial LED fixtures.
W-shaped profile
LED profile with W cross-section for double divergent emission.
Wafer (LED)
Semiconductor wafer on which thousands of LED dies are fabricated.
Wafer dicing
Cutting of the semiconductor wafer into individual LED dies.
Wafer level packaging
Assembly of LED package directly on the wafer for reduced costs.
Wafer processing
Manufacturing process of the LED chip on the semiconductor wafer.
Wafer testing
Electrical and optical testing of LED chips before wafer dicing.
WAGO connector
Professional spring connector for LED cables.
Wake-up mode LED
Dawn simulation with gradual increase in brightness and CCT.
Walkover light
Walkable LED light for floors and pathways.
Wall angle bracket
Corner bracket for wall mounting of LED profiles.
Wall bracket
Bracket for wall mounting of LED profiles.
Wall bracket LED
Wall-mounted LED sconce with mounting bracket.
Wall cove profile
LED profile for indirect lighting in wall coves.
Wall cutout
Hole in the wall for recessed mounting of the LED profile.
Wall dimmer plate
Wall dimmer plate coordinated with the room decor.
Wall feed connector
Wall-mounted power connector for LED profiles.
Wall graze fixture
LED fixture for grazing illumination of textured walls.
Wall grazer
LED fixture that grazes the wall with raking light to highlight texture.
Wall light LED
Wall-mounted LED sconce for decorative and functional lighting.
Wall mount bracket set
Set of brackets for wall mounting of the LED profile.
Wall mount driver
LED power supply for wall mounting.
Wall mount profile
LED profile designed for wall mounting.
Wall mounting channel
Wall channel for housing the LED profile.
Wall niche LED
LED lighting for wall niches with hidden strip.
Wall plate
Wall plate for dimmers and LED controllers.
Wall recessed LED
LED profile recessed into the wall.
Wall sconce LED
Wall-mounted LED sconce for indirect lighting.
Wall slot
Slot in the wall for insertion of a recessed LED profile.
Wall slot profile
LED profile for wall slot with linear light.
Wall switch dimmer
Wall-mounted dimmer for LED lighting control.
Wall switch LED
Wall-mounted switch for LED switching on.
Wall washer distance
Optimal distance of the LED fixture from the wall for uniform wall-wash effect.
Wall washer optic
Asymmetric optics for uniform distribution of LED light on the wall.
Wall washer profile
LED profile with integrated wall-washer optics for wall lighting.
Wall-washer
Fixture or LED profile illuminating a wall uniformly from below or above; enhances texture and colours.
Wardrobe application
LED lighting for wardrobes and dressing rooms; door sensors and high CRI.
Warehouse high bay
LED high bay for warehouses with high ceilings; high efficiency and sensors.
Warehouse LED layout
LED lighting layout for warehouses with uniformity calculation.
Warehouse LED products
Storage depot for LED components for distribution.
Warehouse lighting
LED lighting for warehouses; high bay and presence sensors.
Warehouse sensor system
Sensor system for automatic LED lighting control in the warehouse.
Warm colour appearance
Warm chromatic appearance of LED light at low CCT.
Warm colour LED
LED with warm colour temperature (below 3500 K).
Warm colour LED strip
LED strip with warm CCT below 3000 K.
Warm colour rendering
Colour rendering optimised for warm shades under LED lighting.
Warm dim driver
LED driver compatible with the warm dimming function.
Warm dim strip
LED strip that reduces CCT together with brightness, imitating incandescence.
Warm dimming
Function that automatically reduces colour temperature when brightness is lowered, imitating incandescent lamps.
Warm glow
Warm and soft light; characteristic of low-CCT LEDs with opal diffusers.
Warm light
Light with low colour temperature (≤3000 K); welcoming atmosphere for residential and hospitality environments.
Warm start
Quick restart of the LED after a brief switch-off.
Warm start dimming
Starting dimming from the level memorised before switch-off.
Warm start test
LED restart test after brief switch-off.
Warm tone LED
LED with warm shade for welcoming environments.
Warm white (2200–3500 K)
Colour temperature between 2200 K and 3500 K; yellowish-amber light, similar to incandescent lamps.
Warm white extra (2200 K)
Very warm CCT; similar to candlelight.
Warm-up period
Initial warm-up period before the LED reaches stability.
Warning indicator LED
Warning LED signalling abnormal conditions in the system.
Warning label
Warning label applied to the LED fixture.
Warranty
Warranty period offered by the manufacturer on LED components.
Warranty card
Warranty certificate of the LED product.
Warranty claim
Warranty claim for defects in LED products.
Warranty extension
Extension of the LED product warranty beyond the standard period.
Warranty LED controller
Period and conditions of warranty of the LED controller.
Warranty LED diffuser
Period and conditions of warranty of the LED profile diffuser.
Warranty LED driver
Period and conditions of warranty of the LED driver.
Warranty LED power supply
Period and conditions of warranty of the LED power supply.
Warranty LED profile
Period and conditions of warranty of the aluminium LED profile.
Warranty LED strip
Period and conditions of warranty of the LED strip.
Warranty of colour rendering
Manufacturer's warranty that the CRI of the LED strip remains compliant.
Warranty of luminous flux
Manufacturer's warranty on maintaining LED flux over time.
Warranty of performance LED
Manufacturer's warranty on the luminous performance of the LED over time.
Warranty of uniformity LED
Manufacturer's warranty on chromatic and flux consistency between LED strips.
Warranty overall LED system
Warranty period on the entire installed LED system.
Warranty period
Warranty period of the LED product; typically 3–7 years for professional use.
Warranty registration
Registration of the LED product warranty with the manufacturer.
Warranty replacement
Warranty replacement of a defective LED product.
Warranty terms
Terms and conditions of the LED product warranty.
Wash light
LED fixture distributing uniform light over a wide surface.
Washdown LED
LED fixture resistant to high-pressure washing for food-grade industries.
Washroom LED
LED lighting for washrooms; IP44 and high CRI.
Waste heat recovery
Recovery of heat generated by LEDs for other uses in the building.
Water cooling LED
Liquid cooling for very-high-power LEDs.
Water feature LED
LED lighting for fountains, waterfalls and water features.
Water ingress
Water penetration into the LED fixture; prevented by the IP protection rating.
Water jet resistance test
Water jet resistance test for IP65/IP67 LED fixtures.
Water resistance
Water resistance of LED components; defined by the IP rating.
Water resistant cable gland
Water-resistant cable gland for outdoor LED systems.
Water vapor transmission
Water vapour transmission through LED protection materials.
Waterfront LED
LED lighting for seafronts and waterfront areas.
Waterproof
Water protection for LED strips; IP67/IP68.
Waterproof amplifier
LED amplifier with IP rating for outdoor installations.
Waterproof connector
Waterproof connector for LED joints in damp or outdoor environments.
Waterproof driver
Power supply with IP67/IP68 protection for outdoor use.
Watt (W)
Unit of measurement for electrical power; in LED strips expressed in Watts per metre (W/m).
Watt per metre (W/m)
Electrical power consumed per linear metre of LED strip; fundamental sizing parameter.
Wave effect LED
Wave light effect on addressable LED strips.
Wave soldering
Wave soldering for rigid PCBs in the production of LED bars.
Wavelength
Physical parameter determining the colour of light emitted by the LED.
Wavelength binning
Classification of LED chips by emission wavelength.
Wavelength range
Range of wavelengths emitted by the LED.
Wavelength shift
Variation of the LED emission wavelength with temperature.
Wavelength tolerance
Tolerance on the emission wavelength of the LED chip.
Weather forecast integration
Integration of weather forecasts in the control of outdoor LED lighting.
Weather resistant adhesive
Weather-resistant adhesive for outdoor LED strips.
Weather station integration
Integration with a weather station for automatic outdoor LED control.
Weathering resistance
Resistance to weathering agents of LED system materials.
Weathering test
Weathering resistance test for LED profiles and diffusers.
Weatherproof
Weather-resistant; for outdoor LED fixtures.
Web control interface
Web interface for managing the LED system from a browser.
Web shop LED
Online shop specialised in the sale of LED products.
Web-based control
Management of the LED system via web interface from a browser.
WEEE (directive)
European directive on waste electrical and electronic equipment; regulates the disposal of LED products.
Weight bearing
Load-bearing capacity of the support for heavy LED fixtures.
Weight of the LED profile
Mass per linear metre of the LED profile; for structural calculation.
Wellness application
LEDs for wellness centers; chromotherapy and relaxing scenarios.
Wellness visual LED
State of visual comfort of occupants guaranteed by quality LED lighting.
Wet contact rating
Classification of contacts for operation in damp environments.
Wet location
Environment with direct exposure to water; requires strips and power supplies with IP67/IP68 rating.
Wet location fixture
LED fixture certified for environments with direct water contact.
Wet rated
LED fixture certified for direct water exposure.
Wettability
Ability of metallic surfaces of the LED strip to accept soldering.
White balance
Adjustment of white balance between different LED sources.
White colour rendering
Colour rendering of white LED light; measured with CRI or TM-30.
White D50
CIE reference illuminant at 5003 K; used in graphic arts and LED photography.
White D65
CIE reference illuminant at 6504 K; standard for CRI evaluation of LEDs.
White LED
LED emitting white light; obtained by phosphor conversion on a blue chip or by RGB mixing.
White LED chip
LED chip emitting white light via phosphor conversion.
White noise (LED)
Broadband electrical noise in the LED driver; can cause flicker.
White point
White point in the CIE diagram; the chromatic target for white LEDs.
White standard
White reference for calibrating LED photometric instruments.
White tuning
Fine adjustment of colour temperature in tunable white LED strips.
Wi-Fi
Wireless protocol at 2.4/5 GHz for controlling LED systems via apps and voice assistants (Alexa, Google).
Wide angle
Wide emission angle (above 100 degrees); typical of LED strips.
Wide angle diffuser
Diffuser widening the emission angle of the LED strip.
Wide area network (WAN)
Wide-area network for remote management of distributed LED systems.
Wide beam
Wide LED beam for diffused lighting.
Wide input range
LED power supply with wide input voltage range (100–277 V AC).
Widget LED
Component in the smart home app for quick LED lighting control.
Width of the LED profile
External transverse dimension of the LED profile.
Width of the strip
Transverse measurement of the LED strip (typically 5, 8, 10 or 12 mm); determines compatibility with the profile.
Width of the strip 3 mm
Ultra-narrow 3 mm LED strip for miniaturised profiles.
Width of the strip 5 mm
Compact 5 mm LED strip for slim profiles.
Width of the strip 8 mm
8 mm LED strip; common format for standard profiles.
Width of the strip 10 mm
10 mm LED strip; the most widespread standard format.
Width of the strip 12 mm
12 mm LED strip; for wide profiles and high power.
Width of the strip 15 mm
15 mm LED strip; for high-power or double-row strips.
Width of the strip 20 mm
20 mm LED strip; for very-high-power multi-row strips.
WiFi controller for LED strip
WiFi controller for app-based control of LED strips.
WiFi dimmer for LED
WiFi-connected dimmer for remote control of LED brightness.
WiFi mesh LED
WiFi mesh network for controlling LED fixtures distributed throughout a building.
Wind load
Wind load on outdoor LED fixtures; parameter for sizing supports.
Window display LED
LED lighting for shop windows.
Wine cellar application
LED lighting for wine cellars; low UV/IR emission and warm CCT.
Wine cellar LED
LED lighting for wine cellars; warm CCT and UV protection.
Wire gauge
Wire gauge; determines the current-carrying capacity and voltage drop.
Wire management
Orderly management of cables in the LED installation.
Wire nut
Cap connector for joining LED cables in junction boxes.
Wire of suspension LED
Steel cable for suspending LED profiles from the ceiling.
Wireless bridge
Wireless bridge for connecting two distant LED network segments.
Wireless commissioning
Wireless configuration of LED devices during commissioning.
Wireless controller
LED controller with wireless interface (Wi-Fi, Zigbee, Bluetooth, RF).
Wireless dimmer
Dimmer communicating wirelessly with the LED driver.
Wireless dimming module
Wireless dimming module to install behind the switch.
Wireless gateway
Device connecting the wireless LED network to the wired network or internet.
Wireless mesh network
Wireless mesh network for distributed LED control.
Wireless protocol
Wireless communication protocol for smart LED systems.
Wireless range
Range of the LED controller wireless communication.
Wireless relay
Wirelessly controlled relay for LED on/off control.
Wireless repeater
Wireless repeater for extending the range of the LED network.
Wireless sensor
Wireless sensor for automatic LED lighting control.
Wiring bus
Two-wire system for DALI or KNX communication.
Wiring of power LED
LED system power cables sized for current and distance.
Wiring of signal LED
Cables for LED control signals: DMX, DALI, 0–10 V, SPI.
Wiring point-to-point
Direct power supply-to-strip connection without branches.
Wiring star LED
Direct connection of every LED strip to the power supply without branches.
Wiring structured
Orderly and standardised organisation of LED system cables with conduits and terminals.
WLED firmware
Open-source firmware for controlling addressable LED strips via Wi-Fi.
Wood mounting
Mounting of the LED profile on a wooden surface via screws or clips.
Woodgrain finish
Wood-effect finish on LED profiles for integration with furniture.
Work area lighting
LED lighting of work zones compliant with standard EN 12464-1.
Work light
LED light for temporary lighting of construction sites and work areas.
Work plane
Reference work surface for LED illuminance calculation; typically 0.85 m.
Work surface (h = 0.85 m)
Standard height of the work surface for LED illuminance calculation.
Workbench LED
LED lighting for workbenches and laboratories.
Working current
Actual operating current of the LED strip under load.
Working distance
Operating distance between LED fixture and illuminated surface.
Working temperature
Operating temperature range of the LED system.
Working voltage
Actual operating voltage of the LED strip under load.
Workspace lighting
LED lighting for workspaces; visual comfort and productivity.
WS2801
Addressable LED chip with two-wire SPI protocol; predecessor of the WS2812.
WS2811
External control chip for addressable strips; one controller per 3 LEDs.
WS2812B
Addressable RGB LED chip with integrated controller; driveable with a single data wire for dynamic pixel effects.
WS2813
Evolution of the WS2812B with a backup data line.
WS2814
Addressable RGBW LED strip at 12 V with WS2812-compatible protocol.
WS2815
Evolution of the WS2812B powered at 12 V with backup data line; more reliable over long runs.
WS2818
WS2812 variant with breakpoint signal for greater reliability.
↑ Back to top
X
X-axisHorizontal axis in the CIE diagram; chromatic coordinate x.
X-band radar sensor
X-band radar sensor for presence detection in LED systems.
X-bracket
Cross bracket for crossed mounting of LED profiles.
X-connector
X-shaped connector for four-way crossings between LED profile sections.
X-junction
Cross junction between four LED profile sections.
X-mount
Cross-shaped support for mounting LED fixtures.
X-pattern
Cross-shaped light distribution pattern projected by special LED optics.
X-profile
LED profile with X cross-section for quad light emission.
X-ray fluorescence
XRF analysis for verifying the RoHS compliance of LED components.
X-ray inspection
X-ray inspection for quality control of SMD solder joints on LED strips.
Xenon arc lamp
Xenon lamp replaced by LEDs in many professional applications.
Xenon equivalent
Equivalent xenon power of an LED source.
XHP LED (Cree)
Cree XHP family of very-high-power LED chips for professional fixtures.
Xicato
Manufacturer of high-quality LED modules for architectural lighting.
XLR 3-pin
3-contact XLR version for DMX in many installations.
XLR 3-to-5 pin adapter
Adapter from XLR 3-pin to 5-pin for LED DMX cabling.
XLR 5-pin
5-contact XLR version recommended by the DMX512 standard.
XLR adapter
Adapter between XLR connector and other formats for DMX wiring.
XLR breakout
Distribution of the DMX signal from XLR connector to multiple outputs.
XLR cable
Cable with XLR connectors for DMX512 signal.
XLR cable DMX 3 pin
Cable with 3-pin XLR connectors for DMX512 LED signal.
XLR cable DMX 5 pin
Cable with 5-pin XLR connectors for professional DMX512 LED signal.
XLR connector
Professional 3 or 5-pin connector used for DMX512 signal wiring in LED stage lighting.
XLR coupler
Through joint for connecting two DMX cables with XLR connectors.
XLR daisy chain
Series connection of LED fixtures via XLR connectors for DMX.
XLR extension cable
Extension cable with XLR connectors for the LED DMX line.
XLR female connector
Female XLR connector for DMX input on the LED fixture.
XLR gender changer
Adapter changing the XLR connector gender from male to female.
XLR inline adapter
Inline XLR adapter for conversion from 3-pin to 5-pin or vice versa.
XLR male connector
Male XLR connector for DMX output on the LED fixture.
XLR panel mount
Panel-mount XLR connector for fixed installation on LED equipment.
XLR splitter
DMX signal splitter via XLR connectors.
XLR to RJ45 adapter
Adapter from XLR to RJ45 for distributing the DMX signal over Ethernet cable.
XLR wall plate
Wall plate with XLR connector for fixed DMX sockets.
XML configuration format
XML file format for the configuration and profiles of LED fixtures in software.
XP-series LED (Cree)
Cree XP family of LED chips for high-power applications.
XTE LED (Cree)
Cree XTE high-efficiency LED chip for commercial fixtures.
XY chromatic coordinates
Pair of values in the CIE 1931 diagram uniquely identifying the colour emitted by a LED.
↑ Back to top
Y
Y-adapterY-adapter for splitting LED power supply or signal.
Y-adapter cable
Y-adapter cable for splitting LED power supply.
Y-axis
Vertical axis in the CIE diagram; chromatic coordinate y.
Y-branch connector
Y-branch connector for LED circuits.
Y-cable
Y-cable for splitting LED power supply or signal.
Y-connector
Y-shaped connector splitting a power supply or signal into two outputs for connecting LED strips in parallel.
Y-connector female
Y-connector with two female outputs for splitting LED power supply.
Y-connector male
Y-connector with two male inputs for converging LED power supply.
Y-distribution
Y-distribution of power supply from one point to two LED strips.
Y-mount
Fork support for two-axis adjustable LED projectors.
Y-piece junction
Y-junction for branching a secondary LED line.
Y-splice
Y-junction for branching a LED cable from a main line.
YAG (Yttrium Aluminium Garnet)
Yellow ceramic phosphor (Ce:YAG) used for converting blue LED chip light to white light.
YAG phosphor LED
Cerium-doped Yttrium Aluminium Garnet phosphor for white LEDs.
Yacht LED lighting
LED lighting for yachts and luxury vessels.
Yard light LED
LED light for courtyards and residential outdoor spaces.
Year-round lighting
LED lighting designed for continuous operation throughout the year.
Yellow aging
Yellowing of the LED diffuser over time due to UV or thermal degradation.
Yellow filter
Yellow filter for LED strips; for special applications and signage.
Yellow LED (570–590 nm)
Yellow LED; for signage and indicators.
Yellow LED indicator
Yellow LED indicator for status signalling.
Yellow phosphor
Yellow phosphor (YAG:Ce) for converting blue LED light to white.
Yellow shift
Chromatic shift towards yellow that can occur in white LEDs due to phosphor degradation over time.
Yellow-green LED
Yellow-green LED (565–575 nm); for indicators and signage.
Yield (production rate)
Percentage of compliant LED chips produced from a wafer.
Yield improvement
Improvement of the production yield in LED chip manufacturing.
Yield management
Management of production yield to optimise LED quality.
Yield rate
Percentage of compliant LED products compared to total production.
Yield test
Yield test for verifying the percentage of compliant LED chips.
Yoke adapter
Adapter for fork bracket on LED fixtures with different mounting.
Yoke bolt
Fixing bolt for the fork bracket of an LED projector.
Yoke mount
Mounting with fork bracket for adjustable LED projectors.
Yoke mount bracket
Mounting bracket with fork for adjustable LED projectors.
YoYo mount
Cable retractor for adjusting the height of pendant LED profiles.
YUV colour model
Video colour model applied to LED displays and matrices.
YUV colour space
Video colour space; relevant for LED displays and matrices.
↑ Back to top
Z
Z-axis mountMounting along the Z-axis (vertical) for LED fixtures.
Z-bend connector
Z-shaped connector for LED strips with a change of level.
Z-bracket
Z-bracket for mounting LED profiles on surfaces with a height difference.
Z-connector
Z-shaped connector for joining LED strips with a height difference between sections.
Z-fold strip
Z-folded LED strip for compact backlighting.
Z-mount bracket
Z-bracket for mounting with height difference between LED profiles.
Z-Wave
Low-frequency wireless mesh protocol (868 MHz in Europe) for smart home control of LED lighting.
Z-wave dimmer module
Z-Wave dimmer module for wireless LED control.
Z-wave gateway
Z-Wave gateway for connecting LED devices to the home network.
Z-wave hub
Z-Wave hub for managing LED devices in a mesh network.
Z-wave LED controller
LED controller based on the Z-Wave protocol for home automation.
Z-wave light switch
Z-Wave light switch for wireless LED control.
Z-wave motion sensor
Z-Wave motion sensor for automatic LED activation.
Z-wave relay
Z-Wave relay for remote on/off control of LED circuits.
Z-wave scene controller
Z-Wave controller for managing LED scenes.
Z-wave sensor
Z-Wave sensor for automatic LED lighting control.
Z-wave smart plug
Z-Wave smart plug for on/off control of LED fixtures.
Zener breakdown voltage
Breakdown voltage of the Zener diode used for LED protection.
Zener clamp circuit
Voltage limiting circuit with Zener diode for LED protection.
Zener diode
Diode used as protection against overvoltages in LED strip circuits.
Zener protection circuit
Protection circuit with Zener diode against overvoltages in the LED.
Zener voltage
Zener voltage of the protection diode in the LED circuit.
Zener voltage regulator
Zener voltage regulator for LED protection.
Zero clearance mount
Zero-distance mounting from the surface for ultra-slim LED profiles.
Zero cross detection
Detection of the zero crossing of the AC wave; for synchronised LED dimmers.
Zero cross switching
Switching at the AC zero crossing to reduce LED interference.
Zero crossing dimmer
Dimmer switching at zero crossing to reduce interference.
Zero current switching
Zero-current switching for silent LED dimmers.
Zero defect
Zero-defect objective in the production of LED strips.
Zero delay
Zero delay in the response of the LED system to the control command.
Zero emission LED
LED system powered by renewable sources with zero CO₂ emissions.
Zero energy building LED
LED lighting for zero-energy buildings.
Zero flicker
Total absence of flicker; objective of the best LED drivers.
Zero light pollution
Zero light pollution objective with full-cutoff LED fixtures.
Zero maintenance
LED system designed to require no maintenance during its useful lifetime.
Zero standby power
LED power supply with zero standby consumption; circuit completely disconnected.
Zero waste manufacturing
Zero-waste LED production with complete recycling of waste materials.
Zero-ten volt (0–10 V)
Analogue dimming protocol from 0 to 10 V DC.
Zhaga (standard)
Industry consortium defining mechanical specifications and interfaces for interchangeable LED modules.
Zhaga base
Standardised Zhaga mechanical base for interchangeable LED modules.
Zhaga Book 1
Specification for round ceiling-mounted LED modules.
Zhaga Book 2
Specification for rectangular LED modules.
Zhaga Book 3
Specification for interchangeable linear LED modules.
Zhaga Book 5
Specification for large-format linear LED modules.
Zhaga Book 7
Specification for round LED modules with spotlight fitting.
Zhaga Book 9
Specification for spot and accent LED modules.
Zhaga Book 11
Specification for round and square ceiling-mounted LED modules with standardised fitting.
Zhaga Book 12
Specification for small-format linear LED modules.
Zhaga Book 14
Specification for compact downlight LED modules.
Zhaga Book 18
Specification for outdoor LED modules with DALI interface.
Zhaga connector
Standardised Zhaga connector for interchangeable LED modules.
Zhaga interface
Standardised Zhaga mechanical and electrical interface.
Zhaga module
LED module compliant with the Zhaga standard for interchangeability.
Zhaga Smart Sensing
Zhaga platform for interchangeable smart sensors on LED fixtures.
Zhaga socket
Standardised Zhaga socket for mounting LED modules.
Zhaga-D4i
Combination of the Zhaga mechanical standard with the DALI-2 interface for smart and interchangeable LED fixtures.
Zhaga-D4i connector
Zhaga connector with integrated DALI-2 interface.
Zigbee
Low-consumption wireless mesh protocol (IEEE 802.15.4) widely used for smart home LED control.
Zigbee 3.0
Unified version of the Zigbee protocol ensuring interoperability between LED devices from different brands.
Zigbee 3.0 certification
Zigbee 3.0 standard compliance certification for LED devices.
Zigbee 3.0 device
Zigbee 3.0 certified LED device for interoperability.
Zigbee 3.0 light
LED lamp or strip with integrated Zigbee 3.0 communication.
Zigbee address
Network address of the LED device in the Zigbee network.
Zigbee binding
Direct association between two Zigbee LED devices without going through the coordinator.
Zigbee bridge
Bridge between Zigbee LED network and other networks (Wi-Fi, Ethernet).
Zigbee bridge hub
Zigbee bridge hub for connecting LEDs to the home network.
Zigbee bulb
LED bulb with integrated Zigbee module.
Zigbee channel
Radio channel selected for Zigbee LED communication.
Zigbee cluster
Set of standardised functionalities in a Zigbee LED device.
Zigbee colour control
LED colour control via Zigbee commands.
Zigbee commissioning
Configuration of LED devices in the Zigbee network.
Zigbee compatible LED
LED compatible with the Zigbee communication protocol.
Zigbee controller hub
Controller hub for centralised management of Zigbee LEDs.
Zigbee coordinator
Device managing the Zigbee network as gateway.
Zigbee device pairing
Procedure for associating an LED device to the Zigbee network.
Zigbee dimmer module
Zigbee dimmer module for wireless LED brightness control.
Zigbee dimmer switch
Zigbee dimmer switch for wireless LED control.
Zigbee end device
Terminal device in a Zigbee network; typically an LED driver.
Zigbee firmware update
Firmware update of Zigbee LED devices.
Zigbee Green Power
Profile for battery-free energy-harvesting LED devices.
Zigbee group
Group of Zigbee LED devices controllable simultaneously.
Zigbee hub LED
Zigbee hub for managing smart home LED devices.
Zigbee LED driver
LED driver with integrated Zigbee module for wireless control.
Zigbee LED strip controller
Zigbee controller specific for RGB and CCT LED strips.
Zigbee Light Link (ZLL)
Zigbee profile specific for lighting control.
Zigbee light sensor
Zigbee light sensor for LED daylight harvesting.
Zigbee mesh network
Zigbee mesh network for communication between distributed LED devices.
Zigbee motion sensor
Zigbee motion sensor for automatic LED activation.
Zigbee network configuration
Configuration of the Zigbee network for LED control.
Zigbee network key
Security key protecting communication in the Zigbee LED network.
Zigbee network map
Map of the Zigbee network with all connected LED devices.
Zigbee OTA update
Over-the-Air firmware update of Zigbee LED devices.
Zigbee outdoor sensor
Outdoor Zigbee sensor for garden LED control.
Zigbee plug
Zigbee smart plug for on/off control of plug-in LED fixtures.
Zigbee power meter
Zigbee power meter for monitoring LED consumption.
Zigbee range extender
Zigbee range extender for reaching distant LEDs.
Zigbee remote control
Zigbee remote control for wireless LED lighting control.
Zigbee router
Zigbee device that repeats the signal extending the LED network coverage.
Zigbee scene
Lighting scene stored and recallable in Zigbee LED devices.
Zigbee smart bulb
Smart LED bulb with integrated Zigbee communication.
Zigbee smart switch
Zigbee smart switch for LED control.
Zigbee switch
Zigbee switch for on/off control of LED lighting.
Zigbee temperature sensor
Zigbee temperature sensor for LED thermal management.
Zigbee touchlink
Proximity-based direct association procedure between Zigbee LED devices.
Zigbee wall switch
Wall-mounted Zigbee switch for LED lighting control.
Zinc plated bracket
Zinc-plated bracket for mounting LED profiles in damp environments.
Zinc plated clip
Zinc-plated clip for fixing LED profiles.
Zinc plated screw
Zinc-plated screw for mounting LED profiles.
Zone boundary
Boundary between LED zones with independent lighting.
Zone configuration
Configuration of the zones of the LED system in the control system.
Zone control
Separate management of different areas of the LED system.
Zone controller module
Controller module dedicated to a specific LED zone.
Zone dimming
Independent dimming for each LED zone.
Zone dimming schedule
Programming of dimming for each LED zone.
Zone indicator
LED indicator showing which zone is active.
Zone map
Map of the LED system zones with fixture assignment.
Zone master
Main controller of a LED zone that manages the slaves.
Zone occupancy
Occupancy state of a zone; for automatic LED control.
Zone of LED lighting
Area of the environment served by a group of LED fixtures.
Zone override
Manual override of the automatic programme of a LED zone.
Zone programming
Programming of LED system zones with scenes and automations.
Zone relay
Relay dedicated to a zone of the LED system.
Zone selection switch
Selector for the LED zone to be controlled.
Zone sensor
Sensor dedicated to a specific zone of the LED system.
Zone sensor assignment
Assignment of sensors to specific LED zones.
Zone switch
Switch dedicated to a zone of the LED system.
Zone temperature
Zone temperature monitored for thermal LED control.
Zone thermal
Area of the profile or PCB where heat concentrates; thermal design aims to distribute temperature uniformly.
Zoning layout drawing
Drawing of the zoning layout of the LED system.
Zoning plan
Zoning plan of LED lighting in a project.
↑ Back to top