Cookie Consent by Free Privacy Policy Generator
Close
Products
    Filters
    Language
    Search

    Glossary of led lighting

     

    Glossary of LED Lighting

     

    Lighting • LED Strips • Profiles • Controllers • Power Supplies • Accessories

     


    A


    1000 series aluminum
    Pure aluminum for high-reflectance indoor reflectors in LED profiles.
    1050 aluminum
    Pure aluminum for internal reflectors in LED profiles.
    120-degree corner connector
    Connector for 120° joints between LED strips.
    135-degree corner connector
    Connector for 135° joints between LED strips.
    16-zone controller
    LED controller managing 16 independent zones.
    16-scene controller
    LED controller with 16 memorizable lighting scenes.
    180-degree corner connector
    Connector for 180° joints between LED strips.
    1-10V controller
    LED controller with 1-10V analog output for dimming.
    1-10V dimmer
    0–10V variant where 1V minimum (~10% light) replaces full off.
    1-10V dimming
    Brightness control using a 1-10V analog signal.
    1 kHz PWM dimming
    1 kHz PWM dimming for flicker-free LED strips.
    2.4 GHz controller
    LED controller with 2.4 GHz wireless communication.
    2-channel controller
    Controller with two channels for CCT LED strips (warm white + cool white).
    2-circuit track
    Electrified track with two independent circuits for LEDs.
    2-pin connector
    For monochromatic strips; two contacts (+ and -).
    2-stage dimming
    Dimming in two stages: full brightness and reduced level.
    2-wire connection
    Two-wire connection for monochromatic LED strips (+ and −).
    2-wire dimming
    Two-wire dimming (phase and return) without neutral; for TRIAC.
    3-channel controller
    Controller with three channels for RGB LED strips.
    3-pin connector
    For CCT strips; three contacts.
    3-way connector
    Connector for branching to three LED strip outputs.
    3-wire dimming
    Dimming with three wires: phase, dimmed phase and neutral.
    3M 200MP adhesive tape
    3M 200MP series transfer double-sided tape for LED strips; good adhesion to plastics and metals.
    3M 300LSE adhesive tape
    3M double-sided tape with very high adhesion to low surface energy materials.
    3M 9080A adhesive tape
    3M general-purpose double-sided tape for LED strips in standard indoor applications.
    3M 9448A adhesive tape
    3M double-sided tape with good initial adhesion for strips on smooth surfaces.
    3M 9495LE adhesive tape
    High-performance 3M double-sided tape with 300LSE adhesive; professional standard.
    3M adhesive tape
    High-performance double-sided tape (e.g., 3M VHB, 3M 9495LE) applied to the back of an LED strip for surface mounting.
    4-channel amplifier
    Amplifier for RGBW strips with four independent channels.
    4-pin connector
    For RGB strips; four contacts.
    4-way connector
    Connector for crossing to four LED strip outputs.
    4-wire system
    Four-wire system for RGB strips: one common and three color channels.
    4-zone controller
    LED controller managing 4 independent zones.
    45-degree corner accessory
    45-degree connector fitting for LED profiles.
    5-channel amplifier
    Amplifier for RGBCCT strips with five channels.
    5-pin connector
    For RGBW strips; five contacts.
    5-wire system
    Five-wire system for RGBW strips (common + R + G + B + W).
    6-pin connector
    For RGBCCT strips; six contacts.
    8-channel controller
    Eight-channel controller for complex multi-color LED installations.
    8-scene controller
    LED controller with 8 memorizable lighting scenes.
    8-zone controller
    LED controller managing 8 independent zones.
    90-degree corner accessory
    90-degree connector fitting for LED profiles.
    90-degree corner connector
    Connector for 90° joints between two LED strip sections.
    ABS (Acrylonitrile Butadiene Styrene)
    Thermoplastic polymer used for clips, end caps, and LED profile accessories.
    Abrasion resistance
    Capacity of a diffuser or profile to resist scratches and surface wear over time.
    AC (Alternating Current)
    Mains electricity (230V, 50 Hz); must be converted to DC for LED strips.
    AC/DC conversion
    Transformation of mains alternating current into direct current for LED strips.
    Accelerated life test
    Accelerated aging test used to predict the useful lifespan of LEDs.
    Acceleration factor
    Acceleration multiplier in LED aging tests for lifespan prediction.
    Accelerometer (sensor)
    Vibration sensor integrable into smart LED systems for impact or shock detection.
    Acceptance angle
    Maximum light input angle for an LED optical guide.
    Acceptance angle (optics)
    Maximum light input angle for an optical fiber or LED light guide.
    Acceptance criteria
    Quality control acceptance standards for LED products.
    Acceptance test
    Product acceptance testing upon LED delivery.
    Accuracy class
    Accuracy classification for LED photometric measuring instruments.
    Acetate (filter)
    Colored acetate sheet used as a filter for LED sources in theatrical applications.
    Acid etching
    Chemical surface treatment of aluminum for a matte finish.
    Acid-resistant
    LED profile material resistant to acids for chemical environments.
    Acoustic comfort
    Acoustic comfort of a space where the LED profile does not introduce noise.
    Acoustic emission
    Acoustic noise generated by an LED power supply; should be minimized.
    Acoustic insulation
    Acoustic insulation of an LED profile in noise-sensitive environments.
    Acoustics (profile influence)
    Effect of an LED profile on sound propagation in acoustically treated spaces.
    Acquisition cost
    Purchase cost of LED components for a project.
    Acrylic (PMMA)
    Transparent plastic material used for LED profile diffusers, with high light transmittance (~92%).
    Active cooling
    Active cooling of LEDs via fans; typically used only for high-power fixtures.
    Active dimming
    Dimming activated via light sensor feedback for continuous adjustment.
    Active power
    Active power absorbed by an LED system; measured in Watts.
    Activity-based lighting
    LED lighting that adapts to the specific activity performed in the space.
    Actual power consumption
    Actual measured power consumption of an LED system during operation.
    Actuator
    Device that executes a command received from an LED control system.
    Adapter
    Component enabling connection between connectors or electrical systems of different formats.
    Adapter plate
    Adapter plate for mounting LED profiles on non-standard supports.
    Adaptive lighting
    LED system that automatically adapts to environmental conditions and user preferences.
    Adaptive outdoor lighting
    Outdoor LED lighting that adjusts to traffic, weather conditions, and schedules.
    Additive color mixing
    Additive color synthesis obtained by overlapping red, green, and blue light to generate any color.
    Additive manufacturing
    3D printing of LED components: prototypes of profiles, lenses, brackets.
    Address
    Unique identifier on a communication bus (DMX, DALI).
    Addressable IC controller
    Controller with IC chip for driving addressable LED strips.
    Adhesion promoter
    Primer that improves double-sided tape adhesion on LED strip mounting surfaces.
    Adhesion strength
    Ability of double-sided tape to keep the strip securely fixed over time.
    Adhesion strength test
    Test measuring the adhesion resistance of an LED strip's double-sided tape.
    Adhesion test
    Test to verify the seal and adhesion of an LED strip's double-sided tape to a surface.
    Adhesion to glass
    Adhesion capability of an LED strip's double-sided tape to glass surfaces.
    Adhesion to metal
    Adhesion capability of an LED strip's double-sided tape to metal surfaces.
    Adhesion to plastic
    Adhesion capability of an LED strip's double-sided tape to plastic surfaces.
    Adhesion to wood
    Adhesion capability of an LED strip's double-sided tape to wood surfaces.
    Adhesive backing
    Adhesive backing on an LED strip with a protective liner to remove before mounting.
    Adhesive bond strength
    Bond strength between the LED strip adhesive and the mounting surface.
    Adhesive compatibility
    Compatibility of the adhesive with the mounting surface material.
    Adhesive cure time
    Polymerization time required for the adhesive to reach maximum strength.
    Adhesive failure
    Bond failure of an LED strip's adhesive causing detachment from the surface.
    Adhesive liner
    Protective film on the adhesive backing of an LED strip; removed prior to mounting.
    Adhesive peel test
    Peel test to verify the strength of an LED strip's adhesive.
    Adhesive primer
    Primer applied to the surface before mounting an LED strip to improve adhesion.
    Adhesive shear test
    Shear test to verify the resistance of an LED strip's adhesive.
    Adhesive shelf life
    Storage duration of an LED strip's adhesive before loss of efficacy.
    Adhesive surface preparation
    Surface preparation for adhesive LED strip mounting: cleaning and degreasing.
    Adhesive tape removal
    Removal of adhesive tape from an LED strip for replacement or repositioning.
    Adhesive temperature range
    Temperature range in which the LED strip adhesive maintains its efficacy.
    Admittance
    Reciprocal of impedance; an electrical parameter of LED circuits.
    Adobe wall mounting
    Mounting LED profiles on raw earth/adobe walls using specific anchors.
    Advanced control
    Advanced LED lighting control using sensors and automation.
    Advanced dimming
    Advanced dimming featuring logarithmic curves and deep dimming capabilities.
    Advanced lighting control system
    Advanced LED control system integrating sensors, DALI, and automation.
    Advanced optic
    Advanced optics for precise control of LED light distribution.
    Aesthetic integration
    Aesthetic integration of an LED profile into the architectural design of a space.
    After-sales service
    Post-sale support and maintenance service for LED systems.
    Afterglow
    Residual light emission after switching off; virtually absent in LEDs.
    AGC (Automatic Gain Control)
    Circuit for automatic gain adjustment in DMX receivers.
    Aged LED performance
    LED performance metrics after prolonged operation.
    Ageing factor
    LED depreciation factor used in lighting calculations.
    Ageing mechanism
    LED degradation mechanisms over time: phosphor decay, die aging, connection wear.
    Ageing rate
    Speed of LED ageing; influenced by temperature and drive current.
    Ageing test result
    Results from accelerated LED ageing tests.
    Aging test
    Accelerated ageing test on LEDs and power supplies to predict reliability.
    AGi32
    Professional 3D lighting calculation software for LED design.
    AGi32 software
    3D lighting calculation software for professional LED design.
    Air conditioning load
    Thermal load of LED fixtures on a building's air conditioning system.
    Air gap
    Air space between an LED strip and diffuser; influences light distribution.
    Air gap thermal resistance
    Thermal resistance of the air gap within an LED system.
    Air handling unit
    Air treatment unit where LED lighting contributes to the thermal load.
    Air purification
    UV-C LED systems for air purification in indoor environments.
    Airflow simulation
    Simulation of airflow around an LED profile for thermal optimization.
    Airtight housing
    Hermetic enclosure for LED power supplies in dusty environments.
    Airtight seal
    Hermetic sealing of an LED profile against air and dust ingress.
    Aisle lighting
    LED lighting for warehouse and supermarket aisles.
    Alarm LED
    Status LED indicating abnormal conditions in the system.
    Alarm output
    Alarm output from an LED driver for fault signaling.
    Alarm panel LED
    Alarm panel with LED indicators for event signaling.
    Alarm relay
    Relay that signals faults within an LED system.
    Alarm signal
    Alarm signal generated by an LED driver in case of anomaly.
    Alarm threshold
    Alarm threshold for temperature, current, or voltage in an LED system.
    Albedo
    Ratio of reflected to incident light on a surface; influences lighting calculations.
    Alcove lighting
    LED lighting for architectural alcoves and niches.
    Alexa (Amazon)
    Voice assistant compatible with Wi-Fi and Zigbee LED controllers.
    Alexa compatibility
    LED controller's ability to operate with Alexa voice assistant.
    Alexa routine
    Automated Alexa routine for LED lighting control.
    Alexa skill
    Dedicated Alexa skill for controlling LED lighting systems.
    Algae-resistant
    LED profile material resistant to algae growth in humid environments.
    AlGaInP
    Semiconductor material for high-brightness red, orange, and yellow LEDs.
    Algorithm LED control
    Control algorithm for LED automation and optimization.
    Algorithm of mixing color
    Software in an LED controller that calculates PWM values for RGB channels to achieve a target color.
    Alignment bracket
    Bracket for precise alignment and positioning of LED profiles.
    Alignment guide
    Guide for precise insertion of an LED strip into a profile.
    Alignment mark
    Reference mark on an LED strip for alignment during installation.
    Alignment pin
    Alignment pin in an LED profile for precise diffuser positioning.
    Alignment tolerance
    Permissible alignment tolerance during LED profile installation.
    Alignment tool
    Tool for aligning LED profiles during installation.
    Alkali-resistant
    LED profile material resistant to alkalis for chemical environments.
    All-in-one fixture
    LED fixture with integrated light source, driver, and optics.
    All-weather LED
    LED fixture designed to operate in all weather conditions.
    Alley lighting
    LED lighting for narrow alleys and passageways.
    Allocation plan
    Resource allocation plan for an LED project.
    Allowable load
    Maximum permissible load on an LED profile support.
    Allowable temperature rise
    Permissible temperature increase of an LED system during operation.
    Alloy composition
    Chemical composition of the aluminum alloy used in an LED profile.
    Almost-monochromatic
    LED with a very narrow emission spectrum; nearly monochromatic.
    Almost-resonant converter
    Near-resonant converter in an LED driver for high efficiency and low noise.
    Almost-static test
    Slow-variation parameter test used to characterize LED performance.
    Alphanumeric display
    LED alphanumeric display for information and messaging.
    Alternate source
    Alternative component supplier for LED supply chain resilience.
    Alternating current (AC) input
    AC input terminal on an LED power supply.
    Alternating flash
    Alternating flashing of two LED groups for signaling applications.
    Alternative to traditional lighting
    LED lighting as a replacement for halogen, fluorescent, and discharge lamps.
    Altitude correction
    Altitude correction factor for sizing LED power supplies.
    Altitude derating
    Power derating of an LED power supply at high altitudes.
    Aluminum (profile)
    Primary material for LED strip profiles; ensures thermal dissipation, rigidity, and aesthetic finish.
    Aluminum 5083
    Marine-grade corrosion-resistant aluminum alloy for coastal LED profiles.
    Aluminum 6005A
    Aluminum alloy for structural LED profiles with enhanced mechanical resistance.
    Aluminum 6060
    Al-Mg-Si alloy for LED profile extrusion; optimal balance of workability and strength.
    Aluminum 6082
    High-strength aluminum alloy for walkable LED profiles.
    Aluminum alloy grade
    Grade classification of aluminum alloy used in LED profiles: 6060, 6063, 6005.
    Aluminum anodized
    Aluminum treated with anodic oxidation to increase corrosion resistance and provide colored finishes.
    Aluminum anodized bronze
    Bronze anodized finish for integration with classic or rustic furnishings.
    Aluminum anodized gold
    Gold anodized finish for luxury decorative applications.
    Aluminum brushed
    Mechanically brushed finish with directional texture; industrial aesthetic.
    Aluminum channel
    Aluminum channel for housing LED strips; synonymous with profile.
    Aluminum die-cast
    Aluminum formed via die casting; used for heat sinks and fixture housings.
    Aluminum extruded
    LED profile manufactured via extrusion through a shaped die.
    Aluminum extrusion die
    Extrusion die used in the production of aluminum LED profiles.
    Aluminum extrusion process
    Aluminum extrusion manufacturing process for LED profiles.
    Aluminum extrusion tolerance
    Dimensional tolerances for aluminum extruded LED profiles.
    Aluminum fin
    Aluminum fin on an LED profile for thermal dissipation.
    Aluminum grade selection
    Selection of aluminum alloy for an LED profile based on application requirements.
    Aluminum heat sink profile
    LED profile primarily designed for thermal dissipation in aluminum.
    Aluminum mounting channel
    Aluminum mounting channel for LED strips.
    Aluminum oxide layer
    Aluminum oxide layer produced by anodizing an LED profile.
    Aluminum powder-coated
    LED profile with thermoset powder coating for maximum durability.
    Aluminum recycled
    Recycled aluminum used for sustainable LED profiles.
    Aluminum series 3000
    Al-Mn alloy for corrosion-resistant LED components.
    Aluminum series 5000
    Al-Mg alloy for LED profiles in marine environments.
    Aluminum series 6000
    Al-Mg-Si alloy for LED profile extrusion; the most widely used series.
    Aluminum series 7000
    Al-Zn high-strength alloy for structural LED profiles.
    Aluminum surface treatment
    LED profile surface treatment: anodizing, powder coating, brushing.
    Aluminum thermal conductivity
    Thermal conductivity of LED profile aluminum: 150-200 W/mK.
    Aluminum weight per meter
    Linear meter weight of an aluminum LED profile.
    Aluminum white powder-coated
    White powder coating; maximizes internal light reflection in the profile.
    Amber LED
    LED emitting amber light (590-600 nm), used for warm decorative lighting or signage.
    Ambilight
    Perimeter backlighting for screens; principle also applied in architectural lighting.
    Amorphous silicon
    Amorphous silicon; used in solar cells for off-grid LED systems.
    Amperage
    Electrical current intensity measured in Amperes (A); fundamental parameter for sizing cables and power supplies.
    Ampere-hour (Ah)
    Unit of capacity for emergency LED batteries.
    Ammeter
    Instrument for measuring current intensity in an LED circuit.
    Amphitheater lighting
    LED lighting for amphitheaters and open-air performance spaces.
    Analog control
    Brightness management via continuous analog signal (0-10V, 1-10V).
    Analog vs digital
    Comparison between analog dimming systems (0-10V) and digital (DALI, DMX).
    Analog-digital converter
    Circuit that converts an analog signal (0-10V) into digital for an LED controller.
    Angle of incidence
    Angle between a light ray and the perpendicular to the surface.
    Angle of incidence of light
    Angle at which an LED beam strikes a target surface.
    Angle of reflection
    Angle of the reflected ray; equal to the angle of incidence.
    Annual consumption
    Total energy consumed by the LED system per year; in kWh.
    Anode
    Positive terminal of an LED; on a strip, connected to the positive power supply line (+).
    Anodizing hard
    Anodic treatment with a thick layer; used for aggressive environments.
    Anodizing type II
    Standard anodizing for LED profiles; layer thickness 5-25 micrometers.
    Anodizing type III
    Hard anodizing with layer thickness exceeding 25 micrometers; maximum resistance.
    ANSI binning
    American National Standards Institute standard used to classify LEDs by chromatic shade.
    Anti-condensation
    Treatment that prevents condensation formation on LED diffusers.
    Anti-condensation accessory
    Component that prevents condensation formation inside the LED profile.
    Anti-corrosion
    Protective treatment against corrosion for LED profiles in marine environments.
    Anti-flicker
    Technology that eliminates perceptible LED light flickering, crucial for workplaces and video recording.
    Anti-glare
    Optical treatment or profile design that reduces glare from the LED source.
    Anti-microbial LED
    LED strip with antibacterial coating for healthcare environments.
    Anti-reflection (treatment)
    Optical coating that reduces reflections on the surface of an LED diffuser.
    Anti-slip diffuser
    Diffuser with an anti-slip surface for walkable LED profiles.
    Anti-tampering
    Safety system that prevents tampering with an LED fixture.
    Anti-UV additive
    Chemical compound in PMMA or PC diffusers that prevents yellowing from UV exposure.
    Anti-vandal LED
    LED fixture with IK10 protection against vandalism.
    Anti-yellowing
    Diffuser treatment to prevent yellowing over time due to heat and UV exposure.
    APA102
    Addressable RGB LED chip with two-wire SPI protocol; fast update rate.
    APA107
    Evolution of the APA102 with improved PWM management and lower power consumption.
    APE classification
    Classification of outdoor environments per EN 13201 standard for LED street lighting.
    Apple Home
    Apple application for controlling HomeKit-compatible LED devices.
    Apple HomeKit
    Apple smart home platform for voice-controlled LED lighting via Siri.
    Application
    Procedure for applying adhesive tape to the back of an LED strip.
    Arc lamp
    Gas discharge light source; LED strips replace them in many applications due to efficiency and lifespan.
    Arc suppressor
    Electrical arc suppressor for LED system relays.
    Architectural application
    Use of LED systems to highlight architectural elements such as cornices, niches, vaults, and facades.
    Archway lighting
    LED lighting for arches and covered walkways.
    Area under spectral curves
    Integral of the LED emission spectrum; proportional to radiant flux.
    Armature
    Traditional term for a lighting fixture housing; now typically equipped with an LED source.
    Art-Net
    Ethernet-based protocol for transmitting DMX512 data over IP networks; used in complex LED installations.
    Art-Net controller
    LED controller compatible with Art-Net protocol over Ethernet.
    Assembly
    Hand assembly of LED components; used for prototypes and small batches.
    Assembly
    Machine that positions LED chips on a PCB prior to soldering.
    Assembly
    Automated LED strip assembly using pick-and-place robots.
    Assembly
    Mounting process of LED chips onto the surface of a printed circuit board (PCB) via reflow soldering.
    Assembly
    Through-hole mounting; rarely used in modern LED strips.
    Atrium lighting
    LED lighting for building atriums; suspended profiles and lighting scenarios.
    Attenuation
    Controlled reduction of luminous intensity via dimmer or current adjustment.
    Audio-reactive controller
    LED controller synchronizing effects to music.
    Audio-reactive LED
    Addressable LED strips that respond to music via microphone and controller.
    Auditorium lighting
    LED lighting for auditoriums; multiple scenarios and dimming capabilities.
    Auto-addressing
    Automatic address assignment for LED network devices.
    Autodesk Revit (BIM)
    BIM software with plugins for LED lighting design.
    Automotive application
    LED vehicle lighting using specific automotive-grade strips.
    AWG (American Wire Gauge)
    Standardized system for electrical conductor sizing; typically 18-22 AWG used in LED installations.
    AWG 18 cable
    Cross-section 0.82 mm²; for LED runs up to 5 m.
    AWG 20 cable
    Cross-section 0.52 mm²; for short runs.
    AWG 22 cable
    Cross-section 0.33 mm²; for signals and very short runs.
    Azimuthal angle
    Horizontal rotation angle for aiming an LED fixture.
    ↑ Back to top

    B

    Baby spot LED
    Small projector LED for accent lighting.
    Back-EMF
    Back electromotive force generated by inductive loads; can interfere with LED driver.
    Back-up power
    Emergency power supply for maintaining the LED lighting.
    Backbone (wiring)
    Main distribution cable in complex LED installations.
    Backlight (backlighting)
    Technique of lighting from behind a panel or translucent surface using LED strips or modules.
    Backlight for signs
    LED strip for backlighting signs and illuminated signs.
    Backlighting
    Light from behind a translucent panel.
    Backlighting counter
    LED strip behind counters for a luminous effect on the wall.
    Backlighting display
    LED strip behind displays and screens for bias lighting.
    Backlighting furniture
    LED strip behind furniture for a floating effect and decorative lighting.
    Backlighting headboard
    LED strip behind the headboard of the bed for ambient effect.
    Backlighting mirror
    LED strip behind the mirror for diffuse facial lighting.
    Backlighting panel
    LED strip behind translucent panels for uniform backlighting.
    Backlighting TV
    LED strip behind the TV for bias lighting and visual comfort.
    Backplate
    Rear mounting plate for fixing wall- or ceiling-mounted LED fixtures.
    BACnet
    Building automation protocol compatible with LED lighting systems.
    Badge reader (for LED)
    Badge reader that activates customized LED scenarios based on user input.
    Baffle
    Profile-integrated screen that reduces glare.
    Baffle angle
    Angle of the shield integrated into the LED profile for glare control.
    Baffle cut-off
    Cut-off angle of the anti-glare shield in the LED profile.
    Baffle design
    Design of the shield integrated into the LED profile for visual comfort.
    Baffle material
    Shielding material: black aluminum, matte plastic, technical fabric.
    Bag sealing LED
    UV LED for sealing packaging in the food-grade industry.
    Balance point
    Thermal equilibrium point of the LED system: heat generated = heat dissipated.
    Balanced white
    Balanced white achieved through precise mixing of warm and cool LEDs.
    Balanced wiring
    Balanced wiring for interference-free LED signals.
    Balcony LED lighting
    LED lighting for balconies and loggias; IP44 and warm CCT.
    Ball lens
    Spherical microlens for collimating LED light in specialized optical applications.
    Ballast
    Ballast for discharge lamps; in LED retrofits, it is bypassed or replaced.
    Ballast bypass
    Removal or deactivation of the fluorescent ballast for installing direct LED tubes.
    Ballast compatible
    LED tube compatible with existing fluorescent ballast; simplified retrofit.
    Ballroom LED lighting
    LED lighting for ballrooms; dynamic scenes and dimming.
    Balustrade illuminated
    Railing or parapet with integrated LED strip for decorative lighting.
    Balustrade LED
    LED lighting integrated into balustrades for safety and decoration.
    Band gap
    Energy range in the semiconductor; determines the wavelength.
    Band gap energy
    Band gap energy of the LED semiconductor; determines the emitted color.
    Band gap wavelength
    Wavelength corresponding to the LED’s band gap energy.
    Band-pass filter
    Optical filter that transmits only a specific range of wavelengths.
    Bandwidth (controller)
    Bandwidth of the LED controller for transmitting control data.
    Banister (lighting)
    LED lighting integrated in the banister for safety and decoration.
    Banner LED
    Luminous LED strip for advertising and promotional banners.
    Bar counter LED
    LED lighting for bar counters; chromatic effects and dimming.
    Bar counter LED lighting
    Under and behind counter LED lighting for decorative effects.
    Bar graph indicator
    LED bar graph indicator for visualizing levels and progress.
    Bar light fixture
    Linear bar LED fixture for linear lighting.
    Bar mount
    Bar support for mounting multiple LED fixtures in a row.
    Bare PCB
    Printed circuit board without mounted components; the base for producing LED strips.
    Bare wire connection
    Connection using bare wire to the terminals of the LED power supply.
    Bargain LED lighting
    Economical LED lighting for basic applications.
    Barn door (accessory)
    Adjustable barn doors attached to an LED projector to control the beam.
    Barrier cream
    Protective cream for hands when handling LED strips.
    Barrier layer
    Barrier layer in the LED strip’s PCB for insulation and protection.
    Barrier material
    Barrier material against moisture and gases for LED protection.
    Barrier strip
    Terminal block with insulating barriers between contacts for electrical safety.
    Barrier strip connector
    Terminal block with insulating barriers for safe LED connections.
    Barrier tape
    Barrier tape for marking work areas during LED installation.
    Base assembly
    Assembly of the LED fixture’s mounting base.
    Base bracket
    Base bracket for mounting the LED fixture.
    Base cap connector
    Connector with cap at the base of the LED fixture.
    Base color temperature
    Base CCT of the LED strip before adjustment.
    Base current
    Base current of the LED circuit without dimming.
    Base dimension
    Base dimensions of the LED fixture for mounting.
    Base layer (PCB)
    Base layer of the LED strip’s PCB.
    Base load
    Base load of the LED system with minimum lighting activated.
    Base mounting hole
    Mounting hole in the base of the LED fixture for screw fixation.
    Base PCB
    Flexible (FPCB) or rigid printed circuit board on which LED chips and resistors are soldered.
    Base plate
    Aluminum base plate for thermal dissipation of high-power LED modules.
    Base plate aluminum
    Aluminum base plate for LED thermal dissipation.
    Base temperature (Tb)
    Temperature measured at the base of the LED package; for calculating useful lifetime.
    Base voltage
    Base voltage of the LED circuit before adjustment.
    Baseboard LED
    LED lighting integrated into the baseboard for step marking.
    Baseline measurement
    Reference measurement of LED performance before installation.
    Basement LED lighting
    LED lighting for basements and cellars; high uniformity.
    Basic dimming
    Basic dimming with simple on/off/dim adjustment.
    Basic lighting design
    Basic LED lighting design project for standard applications.
    Basilica LED
    LED lighting for basilicas and historic churches; discreet integration.
    Batch consistency
    Consistency of characteristics across different production batches of LED strips.
    Bathroom cabinet LED
    LED lighting for bathroom cabinets with door sensors.
    Bathroom ceiling LED
    Ceiling-mounted LED lighting for bathrooms; IP44 rated and high CRI.
    Bathroom dimmer
    Bathroom dimmer compatible with LED and compliant with regulations for humid environments.
    Bathroom exhaust LED
    Extraction fan with integrated LED light for bathrooms.
    Bathroom IP44 LED
    LED fixture with IP44 protection for bathroom zones.
    Bathroom LED strip
    IP44 or IP65 LED strip for bathroom lighting.
    Bathroom mirror profile
    LED profile specifically for perimeter lighting of bathroom mirrors.
    Bathroom recessed LED
    IP44-rated LED downlight for recessed installation in bathroom ceilings.
    Bathroom wall light
    IP44-rated LED wall light for bathrooms.
    Battery backup
    Backup battery for emergency operation of the LED.
    Battery backup duration
    Duration of battery-powered operation for emergency LED.
    Battery backup module
    Additional battery module for emergency LED.
    Battery capacity
    Capacity of the emergency LED battery; in mAh.
    Battery charge circuit
    Battery charging circuit in the emergency LED module.
    Battery charge time
    Full recharge time of the emergency LED battery; typically 24 hours.
    Battery charger (LED)
    Battery charging circuit integrated into the emergency LED module.
    Battery compartment
    Battery compartment in the emergency LED module.
    Battery condition indicator
    LED indicator showing the status of the emergency battery.
    Battery disposal
    Proper disposal of depleted batteries from emergency LED modules.
    Battery life cycle
    Number of charge/discharge cycles of the emergency LED battery.
    Battery monitoring system
    Monitoring system for the status of emergency LED batteries.
    Battery pack replacement
    Replacement of the battery pack in the emergency LED module.
    Battery rating
    Rating of the emergency LED battery: voltage, capacity, type.
    Battery self-discharge
    Self-discharge of the emergency LED battery over time.
    Battery status indicator
    LED indicator of the emergency battery’s state of charge.
    Battery temperature range
    Operating temperature range of the emergency LED battery.
    Battery test button
    Button for manually testing the emergency LED battery.
    Battery test interval
    Interval between periodic tests of the emergency LED battery.
    Battery test procedure
    Procedure for testing the emergency LED battery.
    Battery type selection
    Selection of battery type for the emergency LED module: NiMH, LiFePO4.
    Battery voltage
    Voltage of the emergency LED battery; typically 3.6V or 7.2V.
    Bay light
    LED fixture for illuminating large industrial or commercial areas.
    Bay window LED
    LED lighting for bow windows and bay windows.
    Beacon LED
    Flashing LED device for signaling and safety.
    Beam angle
    See "Beam angle". Angle of the luminous cone at 50% of peak intensity.
    Beam architecture
    Shape and distribution of the light cone emitted by an LED fixture.
    Beam pattern
    Pattern of the luminous beam projected by the LED onto a surface.
    Beam shaping
    Shaping of the LED beam using lenses, reflectors, or masks.
    Beam spread
    Spread of the light distribution; similar to beam angle but considering the full field.
    Beam wall
    Wall of light created by adjacent narrow-beam LED strips.
    Before switching on LED
    Initial test of the LED system after installation to verify operation.
    Bellmouth (profile)
    LED profile with flared end for easier cable insertion.
    Belt light
    Luminous LED chain with mounts for decorative lamps at regular intervals.
    Belvedere LED
    LED lighting for belvederes and panoramic terraces.
    Benchmark test
    Comparative performance test of different LED products.
    Bend radius
    Minimum bending radius for LED strip or flexible neon.
    Benefits of LED lighting
    Overall advantages of LED: energy savings, longevity, quality, flexibility.
    Best practices
    Best practices for designing and installing LED systems.
    Beta test
    Field testing phase of a new LED product before market launch.
    Bi-color LED
    LED with two differently colored dies in the same package; for indicators.
    Bi-emission profile
    LED profile emitting light both downward and sideways.
    Bi-level dimming
    Two-level dimming: full brightness and reduced level (e.g., 50%).
    Bi-pin connector
    Two-pin connector for LED tubes and pin-based lamps.
    Bid specification
    Tender specifications for public LED system procurement.
    Bifurcation
    Splitting of an LED power supply cable into two branches.
    BIM (Building Information Modeling)
    Integration of LED lighting into the building’s BIM model.
    Bimorph actuator
    Piezoelectric actuator for controlling adjustable LED optics.
    Bin code
    Alphanumeric code identifying the binning group of an LED batch.
    Binning
    Process of selecting and classifying LED chips for uniformity of color, brightness, and voltage.
    Biological darkness
    Nighttime lighting condition that does not interfere with circadian rhythm.
    Biophilic design
    Design integrating natural elements, including LED lighting that mimics natural light.
    Bird-safe lighting
    Outdoor LED lighting designed to minimize attraction to migratory birds.
    Bit depth
    Dimming signal resolution; 8-bit = 256 levels, 16-bit = 65,536 levels.
    Bit rate
    Data transmission speed in an LED protocol (DMX = 250 kbit/s).
    Black body locus
    Curve of blackbody radiator colors in the CIE diagram.
    Black light LED
    UV-A LED (365–395 nm) for fluorescent effects.
    Blanking interval
    Interval between frames in an addressable LED controller.
    Blaze angle
    Blaze angle in a diffraction grating; for specialized LED optics.
    Bleed (light leakage)
    Undesired light leakage from profile edges.
    Blind spot
    Unlit area in an LED system; to be eliminated in the design.
    Blink pattern
    Programmable flash pattern for signaling LEDs.
    Block diagram
    Block diagram of the LED system showing component connections.
    Blow-out panel
    Pressure relief panel in outdoor LED fixtures to compensate for pressure changes.
    Blue hazard
    Photobiological risk from the blue component of white LEDs.
    Blue LED
    Blue LED (450-475 nm); basis of white LED technology.
    Bluetooth Low Energy (BLE)
    Low-power Bluetooth for LED controllers and proximity sensors.
    Bluetooth Mesh
    Bluetooth-based wireless protocol for controlling distributed LED networks without a dedicated gateway.
    BMS (Building Management System)
    Centralized building management system (BMS), including LED lighting.
    Board-to-board connector
    Connector for linking two adjacent LED PCBs.
    Board-to-wire connector
    Connector for linking an LED PCB to a cable.
    Boat LED
    LED lighting for boats; resistant to saltwater corrosion.
    Body (fixture)
    Main body of an LED fixture housing the light source and optics.
    Body color
    Color of the LED package body; white or black; affects internal reflection.
    Bollard LED
    Outdoor luminous bollard with LED source for pathways and gardens.
    Bolt mount
    Mounting of the LED profile using through-bolts.
    Boltzmann constant
    Physical constant linking temperature and energy; relevant for LED noise.
    Bonding wire
    Thin gold or aluminum wire connecting the LED die to the package terminals.
    Boosted efficiency
    Enhanced LED efficiency through optimized chip and package design.
    Booster
    Power amplifier for additional LED strips.
    Boot loader
    Base firmware in the controller for software updates.
    Bore (hole)
    Hole drilled in the ceiling or surface for installing an LED downlight.
    Bottom-emitting LED
    LED emitting from its bottom face.
    Bow window LED
    LED lighting for bow windows and bay windows.
    Box driver
    Enclosure for concealing the LED power supply in the installation.
    Box power supply
    Enclosure for hiding LED power supplies.
    Box section profile
    LED profile with hollow rectangular cross-section for structural applications.
    Bracket
    Metal bracket or support for wall- or ceiling-mounting LED profiles.
    Bracket
    Metal support for mounting profiles and LED fixtures on walls, ceilings, or other structures.
    Braided cable
    Braided-sheath cable for mechanical protection and retro aesthetics.
    Branch circuit
    Branch circuit from the electrical panel dedicated to powering LED fixtures.
    Brand reliability
    Recognized LED product brand known for quality and support.
    Breakaway tab
    Pre-scored tab on the LED strip to facilitate separation at cut points.
    Breathable membrane
    Breathable membrane in IP65 LED fixtures that equalizes internal pressure.
    Bridge LED
    LED lighting for bridges and viaducts.
    Bridge rectifier
    4-diode bridge rectifier for AC-DC conversion in the LED power supply.
    Bridge rectifier LED
    Bridge rectifier in the LED driver for AC-DC conversion.
    Bridge zip
    Gateway connecting Zigbee LED devices to the home Wi-Fi network.
    Bridgelux
    American manufacturer of high-efficiency LED chips, used in professional LED strips.
    Bridgelux Thrive
    Bridgelux Thrive series with natural spectrum for indoor LED.
    Bridgelux Vesta
    Bridgelux Vesta series of high-efficiency LED chips for professional strips.
    Brightness
    Subjective perception of light quantity; not necessarily matching the measured luminous flux.
    Brightness adjustment
    Ability to adjust the intensity of the LED strip using a dimmer.
    Brightness level
    Set brightness level; expressed as a percentage or in lux.
    Brightness of the LED profile
    Luminous flux exiting the LED profile after diffuser losses.
    Brightness of the LED strip
    Luminous flux emitted by the LED strip; in lumens per meter.
    Brightness uniformity
    Uniformity of perceived brightness across the entire LED diffuser surface.
    Brilliance
    Subjective perception of the brightness of a light source or illuminated surface.
    Brilliance of the diffuser
    Perceived luminance on the LED diffuser surface.
    Broad spectrum LED
    LED with broad spectrum for high color rendering.
    Brochure
    Marketing material presenting LED products.
    Brownout
    Temporary reduction in mains voltage; quality LED drivers compensate for this.
    BTF (Behind the Furniture)
    LED installation behind furniture for a floating light effect.
    Buck converter
    Step-down DC-DC converter; common topology in constant-current LED drivers.
    Buck-boost converter
    DC-DC converter capable of both stepping down and stepping up voltage for LED drivers.
    Buckling
    Mechanical deformation of the profile or PCB due to thermal expansion; prevented using expansion joints.
    Budget
    Available budget for the LED project.
    Budget lighting design
    Available financial budget for the LED lighting project.
    Buffer (circuit)
    Circuit that isolates and protects the LED control signal.
    Buffer battery
    Buffer battery for brief mains interruptions.
    Building automation
    Building automation including LED lighting via KNX, BACnet, DALI.
    Built-in emergency
    Emergency function integrated into the LED fixture; with internal battery.
    Built-in sensor
    Sensor integrated into the LED fixture body.
    Bulk capacitor
    High-capacity capacitor in the LED driver for filtering and energy reserve.
    Bunker light
    Robust, compact LED fixture for harsh environments; turtle-type.
    Burn-in
    Extended burn-in testing phase to ensure long-term LED stability and reliability.
    Burn-in hours
    Number of hours of initial burn-in testing to stabilize LED performance.
    Bus bar
    Conductive busbar for current distribution in large LED installations.
    Bus communication
    Physical line for LED control data.
    Bus topology
    Network topology where LED devices are connected to a single bus (e.g., DALI).
    Bushing
    Insulating bushing for cable passage through holes in metal parts.
    Bushing (threaded insert)
    Threaded brass or steel insert integrated into LED profiles for screw fastening.
    Butterfly beam
    LED light distribution with two lateral lobes; batwing type.
    Bypass capacitor
    Decoupling capacitor placed near the LED chip.
    Bypass diode
    Diode that bypasses a failed LED in a series string. ↑ Back to top

    C

    C-clamp
    C-shaped terminal for the temporary mounting of LED fixtures on trusses and structures.
    Cabin lighting
    LED lighting for cabins in aircraft, trains, and ships.
    Cabinet lighting
    Indoor LED lighting for cupboards, display cases, and storage furniture.
    Cabinet lighting
    LED lighting for cabinet interiors with door sensor and high CRI.
    Cabinet illuminated
    Cabinet with integrated LED strip for enhanced visibility of contents.
    Cable cleat
    Metal clip for safely securing LED cables in ducts or trunking.
    Cable entry
    Cable entry point in the LED fixture; protected by a cable gland.
    Cable gland
    Threaded fitting for watertight cable passage through IP-rated enclosures.
    Cable management
    Organized routing and securing of cables within the LED system for aesthetics and safety.
    Cable marker
    Identification label applied to LED cables to facilitate maintenance.
    Cable tie
    Nylon zip tie for bundling LED cables.
    Cable tray
    Structural support for routing LED power supply cables.
    CAD model
    Three-dimensional model of the LED profile for computer-aided architectural design.
    CADR (Constant Average LED Density Requirement)
    Requirement for constant average luminous density in a lighting design project.
    Cage clamp
    Spring-loaded terminal for quick and secure connection of LED cables.
    Calculation automatic
    Lighting calculation performed automatically by LED design software.
    Calculation automatic profile
    Software that automatically calculates the number of LED profiles required.
    Calculation automatic strip
    Software that automatically calculates the required meters of LED strip.
    Calculation cable sizing
    Determination of the appropriate cable cross-section for LED power supply.
    Calculation clip quantity
    Determination of the number of mounting clips required for the LED profile.
    Calculation connector quantity
    Determination of how many connectors are needed for LED junctions.
    Calculation energy
    Calculation of the annual energy consumption of the LED system.
    Calculation harmonic
    Analysis of current harmonics generated by the LED power supply.
    Calculation illuminance
    Quick estimation of LED illuminance for preliminary assessment.
    Calculation inrush current
    Estimation of the current surge at power-up of LED drivers.
    Calculation light point
    Determination of the number of LED fixtures required for the project.
    Calculation load
    Determination of total power required to properly size the power supply.
    Calculation LPD
    Calculation of LED power density per square meter.
    Calculation maximum length
    Determination of the maximum connectable length of LED strip.
    Calculation minimum cable section
    Determination of the minimum cable cross-section required for LED power supply.
    Calculation profile quantity
    Determination of how many profiles are needed for the LED project.
    Calculation profile temperature
    Estimation of the LED profile temperature based on dissipated power.
    Calculation simplified
    Quick estimation of LED photometric parameters for initial evaluation.
    Calculation spacing
    Determination of the optimal distance between two adjacent LED fixtures.
    Calculation strip quantity
    Determination of the required LED strip meters for the project.
    Calculation supply margin
    Sizing of the LED driver with a 20% safety margin.
    Calculation supply quantity
    Determination of how many power supplies are required for the LED system.
    Calculation total current
    Sum of currents drawn by all LED strips in the system.
    Calculation total flux
    Sum of the luminous flux of all LED strips in the system.
    Calculation total power
    Sum of the power ratings of all LED fixtures in the system.
    Calculation UGR
    Calculation of the Unified Glare Rating (UGR) for the LED fixture in a specific position.
    Calculation verification
    Post-installation verification of the LED lighting design using specialized software.
    Calculation voltage drop
    Calculation of voltage reduction along the LED strip for proper sizing.
    Calculation voltage drop percentage
    Determination of the percentage voltage drop along the LED strip.
    CalcuLuX
    Signify software for lighting calculation of LED fixtures.
    Calendar luminous
    Annual programming of LED lighting with seasonal scenarios.
    Calibrated driver
    LED driver with factory-calibrated output for precise current and voltage control.
    Calibration
    Adjustment of LED intensity to achieve optimal levels in the environment.
    Calibration
    End-of-line adjustment procedure to ensure chromatic uniformity across multiple strips or fixtures.
    Calibration certificate
    Certificate for the calibration of LED photometric measuring instruments.
    Calibration factory
    Calibration of chromatic and luminous parameters during production.
    Calibration of spectrometer
    Calibration of the spectrometer using a reference lamp for accurate LED measurements.
    Calibration white point
    Precise adjustment of the white point of LED strips for chromatic consistency.
    Cam lock
    Cam-based closure mechanism for securing covers and panels on LED fixtures.
    Candle wax effect
    LED effect simulating the flickering, warm light of a candle.
    Candlelight (2000K)
    CCT simulating the light of a candle.
    Cantilever mount
    Overhanging mounting method for an LED profile extending from the support surface.
    Cap protective
    Cover for unused LED connectors; protects against dust and humidity.
    Capacitive proximity sensor
    Capacitive sensor that detects the proximity of a body to activate LEDs.
    Capacitive touch dimmer
    Dimmer with capacitive touch surface for adjustment by touch.
    Capacitor
    Component in power supply circuits to filter ripple and stabilize voltage.
    Capacitor bulk
    High-capacity capacitor in the LED driver for filtering and energy reserve.
    Capacitor ceramic
    MLCC ceramic capacitor used in LED filtering circuits.
    Capacitor electrolytic
    High-capacity capacitor in LED drivers for filtering and energy reserve.
    Capacitor film
    Film capacitor for high-frequency filtering in LED drivers.
    Capacitor parasitic
    Unwanted capacitance in LED circuits that causes oscillations and interference.
    Capacity thermal
    Amount of heat a material can absorb; aluminum profiles have high thermal capacity.
    Capping
    Terminal cap or cover applied to the end of an LED profile for a clean finish.
    Carbon footprint (LED)
    Carbon footprint of LED lighting over its lifecycle; significantly lower than traditional sources.
    Cardinal direction lighting
    LED lighting oriented according to cardinal points; for outdoor and landscape applications.
    Carport LED lighting
    LED lighting for car canopies and carports.
    Carrier frequency
    Carrier frequency of the wireless signal for LED control.
    Carrier frequency (controller)
    Carrier frequency of the wireless signal for LED control.
    Cascading (Controllers)
    Daisy-chaining of LED controllers for large-scale installations.
    Case temperature (Tc)
    Temperature on the surface of the driver; used for derating calculations.
    Casino LED lighting
    LED lighting for gaming rooms and casinos; effects and atmospheric lighting.
    Cast acrylic
    Optical-grade cast PMMA for premium LED diffusers.
    Catalog
    Collection of all manufacturer LED products with technical specifications.
    Catalog digital
    Downloadable electronic version of the LED product catalog.
    Catalog electronic
    Digital catalog of LED products with specifications and images.
    Catalog LED profiles
    Collection of all available LED profile models with dimensions.
    Catalog LED strips
    Collection of all available LED strips with technical specifications.
    Catalog lighting design
    Collection of LED products with photometric data for project planning.
    Catalog online
    Web-accessible digital version of the LED product catalog.
    Catenary mount
    Mounting of LED profiles on tensioned cables between two anchor points.
    Cathode
    Negative terminal of the LED; on the strip, connected to the negative (-) power line.
    Cathode ray oscilloscope
    Oscilloscope for visualizing PWM and DMX signals in the LED system.
    Cathodoluminescence
    Light emission caused by electron bombardment; not used in LED technology.
    CCR (Constant Current Reduction)
    Dimming method by reducing direct current to the LED.
    CCT (Correlated Color Temperature)
    Correlated color temperature, expressed in Kelvin (K); indicates whether the light is warm or cool.
    CCT 2200K
    Color temperature of 2200K; very warm for specialized LED applications.
    CCT 2400K
    Color temperature of 2400K; warm for LED applications.
    CCT 2700K
    Color temperature of 2700K; warm for residential and hospitality LED applications.
    CCT 3000K
    Color temperature of 3000K; warm for versatile LED applications.
    CCT 3500K
    Color temperature of 3500K; neutral for multifunctional LED applications.
    CCT 4000K
    Color temperature of 4000K; neutral for offices and work environments.
    CCT 4500K
    Color temperature of 4500K; neutral for LED applications.
    CCT 5000K
    Color temperature of 5000K; cool for commercial and industrial LED applications.
    CCT 5700K
    Color temperature of 5700K; cool daylight for LED applications.
    CCT 6500K
    Color temperature of 6500K; cool for technical and inspection LED applications.
    CCT accuracy
    Precision of the LED strip's color temperature compared to the declared value.
    CCT amplifier
    Two-channel amplifier for dynamic white strips over long runs.
    CCT preset
    Strip with a fixed color temperature selected during production.
    CCT range
    Available CCT range for tunable white strips.
    CCT tunable (Dynamic White)
    LED strip with two LED rows (warm + cool) that allow color temperature variation.
    CE LED classification
    CE marking certifying LED product compliance with EU directives.
    CE marking
    Declaration of compliance with the essential requirements of European safety directives.
    Ceiling acoustic
    Ceiling-mounted acoustic panel with integrated LED lighting.
    Ceiling grid
    Suspended ceiling grid in which LED panels and profiles are integrated.
    Ceiling light cove
    Recess in the ceiling for LED strip with indirect lighting.
    Ceiling luminous
    Ceiling fully illuminated with diffused LED strips or panels.
    Ceiling recess
    Recess in the ceiling prepared to house an LED profile.
    Ceiling slot
    Linear groove in the ceiling for recessed LED profiles.
    Ceiling-mounted anchor accessory
    Anchor point for suspending LED profiles.
    Cell (Battery)
    Single battery cell within an LED emergency lighting module.
    Center beam candlepower (CBCP)
    Luminous intensity at the exact center of the LED beam; measured in candelas.
    Centerpiece luminous
    Decorative element with integrated LED strip for table lighting.
    Central control panel
    Central panel for managing all LED zones in a building.
    Centralized control
    Management of all LED light points from a central panel or software.
    Ceramic alumina
    Aluminum oxide ceramic substrate for high-dissipation LED PCBs.
    Ceramic aluminum nitride
    AlN ceramic substrate with excellent thermal conductivity for power LEDs.
    Certificate of compliance
    Document attesting that the LED product meets regulatory standards.
    Certificate of origin
    Document certifying the country of production of the LED product.
    Certificate of testing
    Document confirming the successful completion of LED system tests.
    Certificate of warranty
    Document specifying the warranty terms for the LED product.
    Certification ATEX
    Certification for LED fixtures used in potentially explosive atmospheres.
    Certification CB
    International certification scheme for electrical product safety.
    Certification Energy Star
    US energy efficiency certification for LED fixtures.
    Certification ETL
    Alternative to UL certification for the North American market.
    Certification IFS
    Certification for LED lighting in the food-grade industry.
    Certification LED product
    CE, UL, ENEC marks attesting product compliance.
    Certification LED quality
    Attestation of the manufacturer's quality management system (ISO 9001).
    Certification UL
    Safety certification for the North American market.
    Chain pendant
    LED profile suspended via decorative chain.
    Chain suspension accessory
    Kit with chains for suspending LED profiles.
    Chamfer
    Beveled edge on the LED profile for aesthetic integration and safety.
    Change of LED scene
    Transition from one lighting scenario to another in the LED system.
    Change of LED strip
    Procedure for replacing the LED strip in an existing profile.
    Change of color temperature
    Variation of CCT in a tunable white LED strip via controller.
    Change of diffuser
    Procedure for replacing the diffuser in an LED profile.
    Change of LED color
    Variation of emitted color from an RGB LED strip via controller.
    Change of power supply
    Procedure for replacing a faulty LED driver.
    Change-over switch
    Switch that allows alternating between two LED sources or power supplies.
    Channel (Profile)
    Common term for the aluminum profile that houses the LED strip and diffuser.
    Channel blue
    LED controller channel dedicated to the blue chip in RGB strips.
    Channel cool white
    LED controller channel dedicated to cool white chips in CCT strips.
    Channel distribution
    Commercial pathway from LED manufacturer to end customer.
    Channel DMX
    Single address (1-512) within a DMX universe; each LED function occupies one or more channels.
    Channel fader
    Linear slider on a DMX mixer for controlling a single LED channel.
    Channel green
    LED controller channel dedicated to the green chip in RGB strips.
    Channel isolation
    Electrical insulation between channels of a multi-channel LED controller.
    Channel mapping
    Assignment of DMX/DALI channels to each fixture's functions.
    Channel of communication
    Physical or wireless medium for transmitting LED control signals.
    Channel of sale
    Medium through which the LED product reaches the end customer.
    Channel red
    LED controller channel dedicated to the red chip in RGB strips.
    Channel ventilation
    Opening in the LED profile for airflow and heat dissipation.
    Channel warm white
    LED controller channel dedicated to warm white chips in CCT strips.
    Channelled ceiling
    Ceiling with preformed channels for inserting LED profiles.
    Chapel LED lighting
    LED lighting for chapels and places of worship.
    Characteristic electrical
    Electrical parameters of the LED strip: voltage, current, power per meter.
    Characteristic I-V
    Current-voltage curve of the LED; used for driver sizing.
    Characteristic mechanical of the profile
    Dimensions, weight, material, and structural resistance of the LED profile.
    Characteristic photometric of the LED
    Optical parameters of the LED product: flux, CRI, CCT, beam angle, distribution.
    Characteristic thermal of the LED
    Thermal parameters: thermal resistance, max Tj, operating temperature.
    Chase effect
    Lighting effect where LEDs illuminate sequentially to create a chasing motion.
    Check valve (IP)
    Pressure equalization valve in IP-rated LED fixtures that prevents water ingress.
    Checklist installation
    Verification list for correct completion of an LED installation.
    Chemical resistance
    Resistance of LED profile materials to chemical agents and cleaning detergents.
    Chip array
    Arrangement of multiple LED chips in a single package for high brightness.
    Chip bin
    Classification container for LED chips during the binning process.
    Chip bonding pad
    Contact area on the LED die for wire bonding connections.
    Chip carrier
    Substrate of the LED package that supports and connects the die.
    Chip efficiency
    Efficiency of a single LED chip before system-level losses.
    Chip on Board (COB)
    Technology where LED dies are mounted directly on the substrate and covered with a single phosphor layer for uniform light.
    Chip scale package (CSP)
    Ultra-compact LED chip where package dimensions closely match the die size.
    Chip sorting
    Selection and separation of LED chips into performance categories.
    Choke coil
    Filter inductor in the LED power supply to reduce EMI noise.
    Chord length
    Length of the chord of a curved LED profile; used for radius of curvature calculations.
    Chromatic aberration
    Optical defect where different wavelengths of light are focused at different points.
    Chromatic adaptation
    Visual system's ability to adjust to the CCT of the lighting.
    Chromatic analysis
    Study of LED light color to verify compliance with specifications.
    Chromatic binning
    Selection of LEDs based on chromatic shade; defined by quadrilaterals (bins) in the CIE diagram.
    Chromatic consistency
    Color/shade consistency between multiple LED sources in the same space.
    Chromatic dispersion
    Color inconsistency along a strip or between fixtures.
    Chromatic uniformity
    Color consistency along the entire strip; ensured by binning.
    Chromaticity
    Color property defined by x,y coordinates in the CIE diagram.
    Chromaticity shift
    Variation in LED chromatic coordinates over time or with temperature changes.
    Chromotherapy LED
    Use of colored LED light for psychophysical wellness; spas and wellness centers.
    Church LED lighting
    LED lighting for churches; respects heritage, low UV emission.
    CIE (Commission Internationale de l'Éclairage)
    International organization defining colorimetry and photometry standards.
    CIE 1931 chromaticity diagram
    2D color representation chart; used for LED binning.
    CIE 1931 (chromaticity diagram)
    Two-dimensional diagram representing all human-perceivable colors; used for LED binning.
    CIE 1976 (u'v')
    More perceptually uniform chromaticity diagram; better for color comparisons.
    CIE Ra
    See CRI. Average color rendering index based on 8 color samples.
    CIE Rf
    TM-30 fidelity index based on 99 samples; more accurate than CRI.
    CIE Rg
    TM-30 gamut index; indicates if colors appear more or less saturated compared to reference.
    Cinema application
    LED lighting for movie theaters; pathway and seating illumination using low-brightness strips.
    Cinema LED lighting
    LED lighting for movie theaters; pathways and ambient lighting.
    Cinematics (Spotlight)
    Movement mechanism for adjustable track-mounted LED spotlights.
    Circadian rhythm
    Biological day/night cycle; foundation of Human Centric Lighting.
    Circuit anti-bounce
    Circuit that filters switch bounce in LED command buttons.
    Circuit bootstrap
    Startup circuit for half-bridge LED drivers.
    Circuit breaker
    Automatic switch protecting the LED circuit from overcurrent.
    Circuit buck
    Step-down DC-DC converter topology; most common in LED drivers.
    Circuit charge pump
    Charge pump for generating auxiliary voltages in LED drivers.
    Circuit clamp
    Voltage limiting circuit for LED protection.
    Circuit comparator
    Circuit that compares two voltages for LED driver control.
    Circuit control
    Circuit managing LED dimming and color signals.
    Circuit emergency
    Dedicated circuit for powering emergency LEDs.
    Circuit feedback
    Feedback loop in the LED driver to stabilize current or voltage.
    Circuit flyback
    Isolated converter topology for constant-current LED drivers.
    Circuit full-bridge
    Full-bridge topology for high-power LED drivers.
    Circuit half-bridge
    Half-bridge topology for LED drivers.
    Circuit integrator
    Circuit that integrates signals for gradual LED control.
    Circuit layout
    Electrical diagram of LED system connections.
    Circuit LC
    Inductor-capacitor filter at the output of the LED driver.
    Circuit limiter
    Circuit that maintains constant current to the LED chip.
    Circuit multiplying
    Circuit that multiplies voltage for specialized LED applications.
    Circuit open (LED)
    Fault where an LED breaks the circuit; the section turns off.
    Circuit oscillator
    Circuit generating the switching signal in switching LED drivers.
    Circuit PFC
    Power Factor Correction circuit in LED power supplies.
    Circuit power
    Circuit managing power distribution to the LED strip.
    Circuit power supply
    Electrical circuit distributing energy to the LED strip.
    Circuit protection
    Driver components protecting against overcurrent and short circuits.
    Circuit push-pull
    Topology for LED drivers with center-tapped transformers.
    Circuit rectifier
    Circuit converting AC to DC in LED power supplies.
    Circuit regulator
    Linear voltage regulator; low efficiency for LED applications.
    Circuit resonant
    LLC resonant topology for high-efficiency LED drivers.
    Circuit return
    Circuit providing a neutral return for smart LED dimmers without neutral.
    Circuit sample-and-hold
    Circuit that samples and holds signals for LED control.
    Circuit sense
    Current detection circuit for LED adjustment.
    Circuit short (LED)
    Fault where an LED shorts; adjacent LEDs may glow brighter.
    Circuit snubber
    RC network suppressing transients in LED dimmers.
    Circuit soft start
    Gradual startup circuit for LED power supplies.
    Circuit strip power supply
    Electrical diagram for LED strip power distribution.
    Circuit voltage doubler
    Voltage doubling stage in LED power supplies.
    Circular economy (LED)
    Sustainable approach to the LED product lifecycle: recycling and material reuse.
    Circular profile
    LED profile with circular cross-section for pendant and decorative applications.
    Clad metal
    Multi-layer composite metal for LED substrates with high thermal dissipation.
    Clamp meter
    Amperometric clamp for measuring current in LED circuits without cutting cables.
    Class energy
    Energy efficiency classification according to European regulations.
    Class F insulation
    Class F thermal insulation (155°C); used in industrial LED drivers.
    Class I
    Fixture with basic insulation and protective grounding.
    Class II
    Fixture with double or reinforced insulation, requiring no grounding.
    Class III
    Fixture powered by safety extra-low voltage (SELV), typical of LED systems.
    Class LED efficiency
    Energy efficiency classification for LED fixtures.
    Class LED quality
    Classification of the qualitative level of the LED system for project planning.
    Class power supply protection
    Insulation classification of the LED power supply: Class I or II.
    Class reaction to fire
    Flammability classification of LED profile materials.
    Clean room LED lighting
    LED lighting for cleanrooms; low particle emission and easy to clean.
    Cleanroom application
    LEDs for cleanrooms; low particle emission and easy sanitization.
    Clear lens
    Transparent lens or diffuser that does not alter LED light distribution.
    Click & Fit
    Pressure-fit mounting system for quick installation of covers and diffusers on LED profiles.
    Click dimmer
    Dimmer with predefined brightness adjustment steps.
    Client LED
    Customer commissioning an LED lighting project.
    Climate zone
    Climatic zone influencing the choice of IP rating and thermal resistance of LEDs.
    Clinic LED lighting
    LED lighting for medical clinics; high CRI and flicker-free.
    Clip adapter
    Adapter allowing mounting clips from one model to fit a different profile.
    Clip anti-vibration
    Clip with damping for environments subject to vibrations.
    Clip butterfly
    Clip with lateral wings for mounting LED profiles on thin surfaces.
    Clip C-clip
    C-section metal clip for surface-mounted profile installation.
    Clip decorative
    Visible mounting clip with finish coordinated to the LED profile.
    Clip diffuser
    Clip securing the diffuser within the LED profile's guide rails.
    Clip hidden
    Clip concealed between profile and surface; aesthetic mounting.
    Clip profile corner
    Mounting clip designed specifically for corner LED profiles.
    Clip profile recessed
    Clip for mounting LED profiles in suspended ceilings.
    Clip profile slim
    Miniaturized clip for ultra-thin LED profiles.
    Clip spacing
    Recommended distance between mounting clips along the LED profile.
    Clip spring
    Elastic metal clip for recessed LED profile installation.
    Clip spring ceiling
    Elastic clip for securing recessed LED profiles.
    Clip stainless steel
    Clip for humid or corrosive environments.
    Clock signal
    Timing signal in SPI protocols for addressable LED strips.
    Cloister LED lighting
    LED lighting for historic indoor cloisters and courtyards.
    Close coupled
    Mounting with minimal distance between diffuser and LED strip for low profile.
    Closed loop control
    LED control with sensor feedback to verify and correct output.
    Closed terminal accessory
    Closed end cap for the side without a power cable.
    Closure temperature
    Temperature at which a thermal fuse activates for protection.
    Cloud management (LED)
    Remote cloud platform for smart LED installations.
    Cluster LED
    Group of closely spaced LEDs for high luminous concentration.
    CMS (Color Management System)
    Color management system ensuring chromatic consistency across different LED sources.
    Coating
    Any surface treatment applied to profiles, diffusers, or LED strips.
    Coaxial connector
    Coaxial connector; rarely used for LEDs, more common for RF signals.
    COB (Chip on Board)
    LED strip with closely mounted chips producing a continuous light line without visible dots.
    COB IP65
    COB strip with protective coating for outdoor use; continuous light line even when exposed.
    COB strip connector
    Connector specifically designed for COB LED strips with closely spaced pads.
    Code product
    Unique alphanumeric identifier for an LED product in the catalog.
    Code compliance
    LED system compliance with local building and electrical codes.
    Code EAN
    Unique barcode for LED product warehouse management.
    Code LED color
    Coding system to identify CCT or LED color: e.g., 830 = 3000K.
    Code LED profile
    Unique code identifying the LED profile in the catalog.
    Code LED strip
    Unique code identifying the LED strip in the manufacturer's system.
    Code power supply
    Unique code identifying the LED power supply.
    Coefficient of absorption
    Percentage of light absorbed by a surface; complement of reflectance.
    Coefficient of absorption diffuser
    Percentage of light absorbed by the LED diffuser.
    Coefficient of maintenance
    Flux reduction factor over time used in lighting calculations.
    Coefficient of performance (COP)
    Ratio between luminous output and energy input of the LED system.
    Coefficient of reflection
    Percentage of light reflected by a surface; influences environmental lighting design.
    Coefficient of reflection ceiling
    Percentage of light reflected by the ceiling; typically 70-80%.
    Coefficient of reflection floor
    Percentage of light reflected by the floor; used in LED calculations.
    Coefficient of reflection wall
    Percentage of light reflected by walls; influences LED calculations.
    Coefficient of retroreflection
    Percentage of light the diffuser reflects back toward the LED strip.
    Coefficient of Seebeck
    Thermoelectric coefficient; used for measuring LED junction temperature.
    Coefficient of thermal expansion (CTE)
    Affects compatibility between strip and profile materials.
    Coefficient of transmission
    Percentage of light passing through a diffuser; opal is approximately 70%.
    Coefficient of utilization
    Ratio of useful luminous flux on the target surface to total emitted flux.
    Coil (Reel)
    Inductive component in switching LED power supplies for energy conversion.
    Cold start
    Initial startup of an LED system at low ambient temperatures.
    Cold storage LED lighting
    LED lighting for cold storage rooms; resistant to low temperatures.
    Cold white LED strip
    LED strip with cool color temperature (5500-8700K).
    Collapsible diffuser
    Foldable diffuser for easier transport and installation.
    Colonnade LED lighting
    LED lighting for colonnades and arcades.
    Color bin
    Chromatic classification group for LED chips during binning.
    Color blending
    Mixing of colors from adjacent LEDs for a homogeneous chromatic result.
    Color boost
    Controller function that increases LED color saturation.
    Color calibration tool
    Instrument for calibrating color in professional LED systems.
    Color coding
    Color-based coding of conductors to identify polarity and LED channels.
    Color correction filter
    Optical filter for adjusting LED light tint.
    Color cross-fade
    Gradual transition between two colors on an RGB LED strip.
    Color cycle
    Automated color change sequence on an RGB LED strip programmed via controller.
    Color fidelity (Rf)
    TM-30 index of overall color fidelity under LED lighting (scale 0-100).
    Color gamut (Rg)
    TM-30 index of average color saturation under LED lighting; Rg=100 equals reference.
    Color loop
    Continuous color change sequence on an RGB LED strip.
    Color match
    Chromatic correspondence between different LED strips or fixtures.
    Color mixing chamber
    Space between LEDs and diffuser where RGB colors blend.
    Color organ
    Device translating music into color variations on an LED strip.
    Color palette
    Range of colors available in an RGB or RGBCCT system.
    Color picker
    Graphical interface in the app for selecting colors.
    Color point
    Point on the CIE diagram representing a specific LED color.
    Color preset
    Pre-saved color in the LED controller, recallable with a button.
    Color ramp
    Gradual color variation along an LED strip.
    Color rendering
    See "CRI". Ability of an LED source to faithfully reproduce object colors.
    Color sequence
    Scheduled color sequence in a dynamic LED effect.
    Color shift
    Chromatic variation of an LED over time due to phosphor degradation.
    Color space conversion
    Conversion between color spaces (RGB, HSV, CIE) in the LED controller.
    Color stability
    LED's ability to maintain color consistency over time and temperature changes.
    Color temperature
    See "CCT". Parameter in Kelvin indicating light shade (warm, neutral, cool).
    Color temperature adjustment
    CCT adjustment via controller in tunable white LED strips.
    Color temperature preset
    Pre-saved color temperature recallable from the controller.
    Color temperature proximal
    Closest CCT on Planckian curves to the LED's color point.
    Color wash
    Uniform lighting with colored light via RGB strips.
    Color wheel
    Color reference wheel used in LED control apps.
    Colorimeter
    Portable instrument for measuring CCT and chromatic coordinates.
    Colorimeter portable
    Portable instrument for measuring LED light color in the field.
    Colour gamut area
    Area of the chromatic gamut in the CIE diagram covered by an LED system.
    Combiner zone
    Controller managing multiple LED zones with independent scenarios.
    Comfort acoustic
    Absence of thermal discomfort in the environment caused by LED heat output.
    Comfort visual
    Lighting condition that does not cause visual fatigue or discomfort; fundamental parameter in architecture.
    Command Alexa
    Voice command via Alexa to turn on, off, or dim LEDs.
    Command dimmer
    Adjustment signal sent to the LED driver to vary brightness.
    Command Google
    Google voice command for LED lighting control.
    Command pulse
    Button sending a pulse to the LED controller for on/dimming functions.
    Command Siri
    Siri voice command for LED control via Apple HomeKit.
    Commercial communication
    Promotional and informational materials for LED products.
    Commercial LED lighting
    LED lighting for offices, shops, and shopping centers.
    Commissioning
    Setup, configuration, and calibration of an installed LED system.
    Commissioning report
    Handover report for the commissioned LED system.
    Communication infrared (IR)
    Transmission of commands to the LED controller via infrared rays.
    Communication powerline
    Data transmission over the electrical network for LED control.
    Communication technical
    Technical information transmitted from manufacturer to LED customers.
    Communication wireless
    Wireless transmission of commands and data in LED systems: WiFi, Zigbee, BLE.
    Compatibility Alexa
    LED controller's ability to operate with Alexa voice assistant.
    Compatibility dimmer-driver
    Verification that dimmer and LED driver work correctly together.
    Compatibility driver-strip
    Voltage and power matching between power supply and LED strip.
    Compatibility Google Home
    LED controller's ability to operate with Google Home.
    Compatibility HomeKit
    LED controller's ability to operate with Apple HomeKit.
    Compatibility Matter
    LED device's ability to operate with the Matter standard.
    Compatibility SmartThings
    LED controller's ability to operate with Samsung SmartThings.
    Compatibility strip-profile
    Dimensional match between LED strip and profile channel.
    Competitiveness
    Ability of an LED product to offer superior performance at market price.
    Completion of the system
    Final phase of LED installation including testing and documentation.
    Compliance CE
    Manufacturer's declaration that the LED product meets EU directives.
    Compliance customs
    Customs documentation for LED product import/export.
    Compliance environmental
    Adherence of LED product to environmental regulations: RoHS, WEEE, REACH.
    Compliance product
    Adherence of LED product to declared standards and specifications.
    Component replacement
    Substitutable part of the LED system: strip, diffuser, end cap, driver.
    Component spare
    Replacement component for the LED system.
    Components of the LED system
    List of components: strip, profiles, driver, controller, connectors, sensors.
    Composition chromatic
    Proportion of different colors in the LED emission spectrum.
    Composition of the kit
    List of components included in an LED lighting kit.
    Compressor
    Compressor for cleaning LED profiles with compressed air before installation.
    Concentrator solar
    System concentrating solar light for off-grid LED power supply.
    Condensation
    Fogging of LED diffuser due to temperature difference; preventable with ventilation.
    Condensation indoor
    Condensation formation inside LED fixtures due to thermal swings.
    Conditions commercial
    Terms of sale, payment, and delivery for LED products.
    Conditions environmental
    Temperature, humidity, and other factors affecting LED performance.
    Conditions installation
    Environmental and procedural requirements for correct strip mounting.
    Conditions sale
    Commercial terms for purchasing LED products.
    Conditions warranty
    Terms and limits of the warranty offered by the LED manufacturer.
    Conductivity electrical
    Material's ability to conduct current; PCB copper has high conductivity.
    Conductor neutral
    Blue wire in the electrical network; connected to the LED power supply.
    Conductor protective
    Yellow-green PE wire; for grounding Class I LED fixtures.
    Conduit cable routing
    Guide for organized routing of LED cables.
    Conduit corner
    Duct for routing LED cables around corners.
    Conduit IP20
    Plastic duct for routing LED cables in indoor environments.
    Conduit IP65
    Watertight duct for routing LED cables in outdoor environments.
    Conduit self-adhesive
    Cable duct with double-sided tape for neat routing of LED cables.
    Confirmation order
    Document confirming acceptance of the LED product order.
    Configuration
    Setting of operational parameters of the LED system post-installation.
    Configuration driver
    Setting current, voltage, and dimming parameters of the LED driver.
    Configuration system
    Setting all system parameters: addresses, zones, scenes.
    Configuration WiFi
    Procedure for connecting the LED controller to the home WiFi network.
    Connection 4-channel amplifier
    Amplifier for RGBW strips with four independent channels.
    Connection 5-channel amplifier
    Amplifier for RGBCCT strips with five channels.
    Connection bar
    Terminal block for distributing power to multiple LED strips.
    Connection branched
    Parallel connection of LED strips from a single power point.
    Connection cable-strip
    Connection between power supply cable and LED strip.
    Connection cascaded
    Series connection of multiple LED fixtures on a single line.
    Connection controller
    Connecting the controller to the LED strip and command signals.
    Connection corner 120-degree
    Connector for 120° joints between LED strips.
    Connection corner 135-degree
    Connector for 135° joints between LED strips.
    Connection corner 90-degree
    Connector for 90° joints between two LED strip sections.
    Connection dimmer
    Wiring the dimmer to the driver and LED control system.
    Connection dovetail
    Mechanical interlocking joint between two LED profiles.
    Connection electrical
    Physical connection of electrical components in the LED system.
    Connection parallel
    Connection of multiple LED strips with identical voltages; avoids voltage drop.
    Connection plug
    Connection via socket and plug for easy LED fixture disconnection.
    Connection quick
    Solderless connection system for LED strips: clips, WAGO, hippo.
    Connection sensor
    Connecting the sensor to the controller for automated LED control.
    Connection series
    Sequential LED connection; total voltage is the sum of individual drops.
    Connection star
    Topology where each strip connects directly to the power supply.
    Connection strip-to-driver
    Electrical connection between LED strip and power supply.
    Connection strip-to-strip
    Junction between two LED strip sections.
    Connection terminal
    Electrical connection using screw or spring terminals for power cables.
    Connectivity
    Ability of the LED system to communicate with other devices and networks.
    Connector 10 mm clip
    Clip connector for 10 mm wide LED strips.
    Connector 12 mm clip
    Clip connector for 12 mm wide LED strips.
    Connector 2-pin
    For monochromatic strips; two contacts (+ and -).
    Connector 2-way
    Connector for splitting to two LED strip outputs.
    Connector 3-pin
    For CCT strips; three contacts.
    Connector 3-way
    Connector for branching to three LED strip outputs.
    Connector 4-pin
    For RGB strips; four contacts.
    Connector 4-way
    Connector for crossing to four LED strip outputs.
    Connector 5-pin
    For RGBW strips; five contacts.
    Connector 6-pin
    For RGBCCT strips; six contacts.
    Connector 8 mm clip
    Clip connector for 8 mm wide LED strips.
    Connector banana
    Connector for electrical testing and temporary LED system connections.
    Connector clip
    Solderless quick connector for LED strips; grips the copper pads.
    Connector crimp
    Connector attached to cable via mechanical compression; for permanent wiring.
    Connector cross (+)
    Cross connector for 4-way intersections of strip segments.
    Connector DC 5.5x2.1
    Standard DC connector for LED strip power supplies.
    Connector DC 5.5x2.5
    Alternative DC connector for LED strip power supplies.
    Connector Dupont
    Standard pin connector for LED system prototyping and testing.
    Connector female
    Receptacle of the LED connector; receives the male plug.
    Connector flexible PCB
    Small flexible PCB with connectors for tight bends between LED strips.
    Connector G
    Connector specific for LED strip with fitting of type G.
    Connector hippo
    Quick clip connector widely used in professional installations.
    Connector IDC (Insulation Displacement)
    Connector type that pierces cable insulation to establish electrical contact without stripping.
    Connector IP20 clip
    Unprotected clip connector for indoor LED strips.
    Connector IP67
    Waterproof sealed connector for LED strip joints in outdoor or humid environments.
    Connector IP68
    Hermetically sealed connector for permanent submersion; underwater strips.
    Connector male
    Plug of the LED connector; inserts into the female socket.
    Connector Molex
    Compact connector for indoor wiring in the LED industry.
    Connector neon flex
    Connector designed for powering and joining LED neon flex.
    Connector pigtail
    Connector on a free cable end for flexible LED system connections.
    Connector pogo pin
    Connector with spring-loaded pins for reliable contact.
    Connector polarized
    Insertable in only one direction; prevents polarity reversal.
    Connector push-in 2-pole
    Quick insertion connector for monochromatic strips.
    Connector push-in 4-pole
    Quick insertion connector for RGB strips.
    Connector push-in 5-pole
    Quick insertion connector for RGBW strips.
    Connector push-in 6-pole
    Quick insertion connector for RGBCCT strips.
    Connector recessed
    Connector designed to be concealed within the LED profile.
    Connector solderless
    Quick connector that grips the LED strip without requiring soldering.
    Connector spring
    Connector with spring contact for quick, tool-free connections.
    Connector T
    Connector for branching an LED line at 90° from a main run.
    Connector track
    Electrical connector for powering LED track systems.
    Connector universal strip
    Connector compatible with various widths and types of LED strips.
    Connector WAGO
    Professional spring connector for fast, secure connections.
    Connector with 10 cm cable
    Connector with 10 cm short cable for LED strips.
    Connector with 100 cm cable
    Connector with 100 cm cable for LED strips.
    Connector with 15 cm cable
    Connector with 15 cm cable for LED strips.
    Connector with 30 cm cable
    Connector with 30 cm cable for LED strips.
    Connector with 50 cm cable
    Connector with 50 cm cable for LED strips.
    Connector with inline junction
    Inline connector for joining two LED cables.
    Connector with IP68 junction
    Waterproof junction connector for underwater LED strips.
    Consistency chromatic
    Color uniformity across LED strips from the same batch and between different batches.
    Constant flux control
    System maintaining constant LED luminous flux by compensating for degradation.
    Consultant LED lighting design
    Professional offering specialized consulting in LED lighting.
    Consulting energy
    Consulting service for optimizing LED lighting energy efficiency.
    Consulting free
    Technical consulting service offered by the LED manufacturer.
    Consulting lighting design
    Professional service for LED lighting design.
    Consumption annual
    Electrical energy consumed by the LED system in one year.
    Consumption per meter strip
    Power drawn by the LED strip per linear meter; in W/m.
    Consumption rest
    Power drawn by the LED system in standby; should be minimized.
    Consumption standby
    Power drawn by the LED power supply when the strip is off.
    Consumption total system
    Sum of power ratings for strips, drivers, and auxiliary components.
    Contact commercial
    Manufacturer representative for commercial LED inquiries.
    Contact technical
    Manufacturer representative for technical LED support.
    Container watertight
    IP65/IP67 enclosure for power supplies and controllers.
    Content copper of the PCB
    Quantity of copper in the LED strip PCB; affects resistance and heat dissipation.
    Continuity luminous of the profile
    Absence of interruptions in the light line between adjacent LED profiles.
    Continuity service
    Ability of the LED system to operate without interruptions.
    Continuity of the light line
    Absence of visible breaks between adjacent profiles.
    Contract EPC
    Energy Performance Contract for LED installations with savings guarantees.
    Contract maintenance
    Agreement for periodic maintenance of the LED system.
    Contract supply
    Contractual agreement for the supply of LED products.
    Contrast luminous
    Brightness difference between adjacent surfaces.
    Control 0-10V
    Brightness management via continuous 0-10V signal.
    Control analog
    Brightness adjustment via analog dimming.
    Control biometric
    LED lighting activation via biometric recognition.
    Control centralized
    Management from a single panel or software interface.
    Control chromatic
    Management of LED light color via RGB or RGBCCT controller.
    Control circadian
    Automatic management of CCT and LED intensity according to biological rhythm.
    Control color temperature
    CCT adjustment in tunable white LED strips.
    Control decentralized
    Distributed management with independent local controllers.
    Control environmental
    Integrated management of LED lighting and building HVAC.
    Control gesture
    LED activation via sensor-detected hand gestures.
    Control intensity
    Brightness adjustment via dimming.
    Control multiroom
    LED lighting management across multiple rooms with independent scenarios.
    Control proportional
    LED dimming proportional to light sensor signal.
    Control remote
    Management of the LED system from a distance via app, web, or smart home system.
    Control scene
    Saving and recall of intensity and color combinations.
    Control smartphone
    LED lighting management via smartphone app.
    Control time-slot
    LED lighting management with different scenarios by time of day.
    Control timer
    Scheduled programming for LED on/off cycles.
    Control voice
    LED management via voice assistants.
    Control zone
    Independent management of different areas within the LED system.
    Controller
    Home automation controller.
    Controller 0-10V
    LED controller with 0-10V analog output for dimming.
    Controller 1-10V
    LED controller with 1-10V analog output for dimming.
    Controller 16-zone
    LED controller managing 16 independent zones.
    Controller 2.4 GHz
    LED controller with 2.4 GHz wireless communication.
    Controller 4-zone
    LED controller managing 4 independent zones.
    Controller 8-zone
    LED controller managing 8 independent zones.
    Controller addressable IC
    Controller with IC chip for driving addressable LED strips.
    Controller Art-Net
    LED controller compatible with Art-Net protocol over Ethernet.
    Controller audio-reactive
    LED controller synchronizing effects to music.
    Controller central
    Central control unit for automated LED management.
    Controller DALI
    Device compatible with DALI protocol for architectural lighting control.
    Controller DALI-2
    Controller compatible with DALI-2 protocol for advanced lighting control.
    Controller display
    LED controller with LCD or OLED display for parameter visualization.
    Controller DMX
    Device generating DMX512 signals for professional LED system control.
    Controller DMX 1024-channel
    DMX controller managing two universes for 1024 channels.
    Controller DMX 512-channel
    DMX controller managing a full universe of 512 channels.
    Controller dynamic white
    Two-channel controller for tunable white LED strips.
    Controller effect
    LED controller with preset effects: rainbow, chase, fade, strobe.
    Controller Ethernet
    LED controller with Ethernet connection for network management.
    Controller gateway
    LED controller acting as gateway between different protocols.
    Controller IP65
    LED controller with IP65 protection for outdoor installations.
    Controller IR remote
    LED controller including infrared remote.
    Controller KNX-DALI
    Controller converting KNX commands to DALI signals for LED drivers.
    Controller master
    Main LED controller coordinating slaves and amplifiers in the network.
    Controller mini WiFi
    Miniaturized WiFi LED controller for compact installations.
    Controller multi-channel
    Controller with multiple independent outputs for different strip groups.
    Controller multi-protocol
    LED controller compatible with multiple protocols: DALI, DMX, 0-10V.
    Controller multi-zone
    Controller managing independent LED zones with different scenes and dimming levels.
    Controller neon flex
    Controller specifically designed for LED neon flex management.
    Controller on DIN rail
    LED controller for mounting on DIN rail in electrical panels.
    Controller programmable
    LED controller allowing programming of scenes and sequences.
    Controller push dimmer
    LED controller operated by a push button with dimmer function.
    Controller recessed
    LED controller for recessed mounting in wall boxes.
    Controller RF remote
    LED controller including radio frequency remote.
    Controller RGB
    Three-channel controller for RGB LED strip color management via mixing.
    Controller RGB with remote
    RGB strip controller including remote for color selection.
    Controller RGBCCT
    Five-channel controller for RGB plus warm/cool white LED strips.
    Controller RGBCCT WiFi
    5-channel WiFi controller for RGBCCT LED strips.
    Controller RGBW
    Four-channel controller for RGB plus dedicated white channel strips.
    Controller RGBW with app
    RGBW controller manageable via smartphone app.
    Controller sACN
    LED controller compatible with sACN (Art-Net 1.31) protocol over Ethernet.
    Controller scene
    LED controller with 16 memorizable lighting scenes.
    Controller single-channel
    Controller regulating a single luminous channel; for monochromatic strips.
    Controller slave
    Secondary LED controller synchronized by the master.
    Controller smart home
    LED controller integrable with smart home platforms: Alexa, Google, HomeKit.
    Controller solar panel
    LED controller powered by solar panels for off-grid systems.
    Controller SPI
    Controller with SPI serial interface for addressable LED strips.
    Controller standalone
    Autonomous LED controller operating without network connection.
    Controller timer
    LED controller with programmable timer for on/off scheduling.
    Controller touch
    Controller with touch-sensitive panel for intuitive color and intensity adjustment.
    Controller touch wall-mounted
    LED controller with touch panel for wall mounting.
    Controller Tuya WiFi
    LED controller based on the Tuya platform for WiFi control.
    Controller Wi-Fi
    Controller connected to Wi-Fi network for app or voice assistant control.
    Controller wireless DMX
    DMX controller with wireless signal transmission.
    Controller WS2812B
    Controller specifically designed for WS2812B addressable LED strips.
    Controller Zigbee
    Controller based on Zigbee protocol for low-consumption mesh lighting networks.
    Controller Zigbee 3.0
    LED controller certified Zigbee 3.0 for interoperability.
    Convection
    Heat transfer via fluid (air) movement; primary dissipation method for LED profiles.
    Convection forced
    Air movement generated by fans to cool LED fixtures.
    Convection natural
    Spontaneous movement of warm air for LED profile heat dissipation.
    Convention center LED lighting
    LED lighting for convention centers; conference and gala lighting scenarios.
    Conversion AC-DC
    Circuit converting mains alternating current to direct current for LEDs.
    Conversion current-voltage
    Circuit converting a current signal to a voltage signal for LEDs.
    Conversion DC-DC boost
    Circuit that increases DC voltage.
    Conversion DC-DC buck
    Circuit that reduces DC voltage; used in some LED drivers.
    Conversion lumen-lux
    Calculation of illuminance in lux from LED flux in lumens.
    Conversion photonic
    Process by which phosphors convert blue LED chip light into broad-spectrum white light.
    Converter analog-digital
    Circuit that converts an analog signal (0-10V) into digital for an LED controller.
    Converter DC-DC
    Converts one DC voltage to another; used in some LED drivers.
    Cool light
    Light with high color temperature (≥5000K); activating and stimulating, for commercial and technical environments.
    Cool technical light
    LED lighting at 6500K for technical and industrial environments.
    Cool white
    Color temperature between 5500K and 8700K; bluish light, suitable for commercial and technical environments.
    Coordination aesthetic
    Matching finishes and materials between LED profiles and furnishings.
    Copolymer (Diffuser)
    Copolymer plastic material for LED diffusers with optimized properties.
    Copper (Conductor)
    Highly conductive metal used for PCB traces on LED strips.
    Copper OFC
    Oxygen-free copper for low-resistance LED conductors.
    Corner bar
    Rigid L-shaped bar for corners and angles.
    Corner connector
    L-shaped connector for 90° joints between LED strips in profile corners.
    Corrosion
    Deterioration of contacts or profiles caused by chemicals or humidity; anodizing protects the profile.
    Corrosion galvanic
    Deterioration between dissimilar metals in contact when exposed to humidity.
    Corridor application
    LED lighting for hallways; integrates presence sensors and automatic dimming.
    Corridor LED lighting
    LED lighting for hallways; includes sensors and uniformity.
    Corrugated tube
    Flexible corrugated tube for protecting LED cables.
    Cosφ (Power Factor)
    Ratio between active and apparent power; good LED power supply ≥ 0.9.
    Cost analysis
    Comparison between investment costs and benefits of LED lighting.
    Cost energy
    Energy expense for operating the LED system.
    Cost installation
    Labor price for mounting the LED system.
    Cost lifecycle
    Total cost of the LED system: purchase, installation, energy, maintenance, disposal.
    Cost per light point
    Average cost of each LED light point in the system.
    Cost per lumen
    Ratio between LED product price and luminous flux; indicates value.
    Cost power supply
    Price of the power supply for the LED system.
    Cost total system
    Sum of all costs: products, installation, commissioning.
    Counter luminous
    Counter with integrated LED strip for lighting and design.
    Counter-section
    Complementary element of the LED profile that fits into the recess.
    Count of LEDs per meter
    Number of LED chips per meter; ranges from 30 to 700+.
    Count of light points
    Total number of LED fixtures in the lighting design project.
    Count of meters strip
    Measurement of total LED strip length in the project.
    Count of operating hours
    Accumulated operating hours of the LED system.
    Coupling mechanical
    Mechanical connection between two LED profiles for continuity.
    Coupling optical
    Efficient transfer of light from the LED chip to the diffuser or lens through a transparent medium.
    Courtyard LED lighting
    LED lighting for building indoor and outdoor courtyards.
    Cove architectural
    Architectural recess housing LED strips for indirect lighting.
    Cove double
    Double groove for LED strips on both sides of a soffit.
    Cove drywall
    Perimeter drywall profile with housing for LED strip; ceiling-mounted indirect light.
    Cove luminous
    Architectural recess (drywall, wood, or metal) housing LED strips for indirect lighting.
    Cove metal
    Metal profile groove housing LED strips.
    Cove prefabricated
    Drywall or polystyrene element with preformed housing for LED strips.
    Cove recessed
    Ceiling recess with completely hidden LED profile.
    Cove wood
    Milled wood groove housing LED strips.
    Cover (Diffuser)
    Polycarbonate or PMMA element inserting into the LED profile; available in transparent, opal, or frosted.
    Cover anti-yellowing
    Diffuser with UV stabilizers to prevent yellowing.
    Cover continuous
    Single-piece diffuser for entire length; no joints.
    Cover corner
    Diffuser specifically for corner profiles, with 45° or 90° geometry.
    Cover flat
    Planar diffuser; thin and minimal profile.
    Cover frosted
    Semi-transparent diffuser with sandblasted finish; balances uniformity and light transmission.
    Cover interchangeable
    Diffuser replaceable without removing the profile.
    Cover lens
    Diffuser with convex profile for controlling light distribution.
    Cover opal
    Translucent white diffuser that evens light, hiding individual LEDs; reduces brightness by ~30%.
    Cover plate
    Cover plate for junction boxes and LED connections.
    Cover profile
    Diffuser closing the upper part of the LED profile.
    Cover round
    Semicircular cross-section diffuser for round profiles.
    Cover transparent
    Crystal-clear diffuser that does not reduce brightness; individual LEDs remain visible.
    Cover UV-resistant
    Diffuser with UV protection for outdoor use.
    Coverage area
    Surface illuminated by a single fixture or LED profile at the required level.
    Coverage warranty
    Elements covered by LED product warranty: defects, performance.
    CQS (Color Quality Scale)
    Alternative scale to CRI for LED chromatic quality.
    Cree J Series
    Cree J series LED chips with high current density.
    Cree XLamp
    Cree XLamp family of high-power LED chips.
    Crestron
    Professional automation system for LED lighting in commercial and luxury environments.
    CRI (Color Rendering Index)
    Color rendering index on a 0-100 scale; measures how natural colors appear. Values ≥90 are considered excellent.
    CRI 70
    Color rendering index 70; baseline for LED lighting.
    CRI 75
    Color rendering index 75; baseline for LED lighting.
    CRI 80
    Color rendering index 80; good for general LED lighting.
    CRI 85
    Color rendering index 85; good for LED lighting.
    CRI 90
    Color rendering index 90; excellent for LED lighting.
    CRI 93
    Color rendering index 93; excellent for LED lighting.
    CRI 95
    Color rendering index 95; superior for LED lighting.
    CRI 97
    Color rendering index 97; superior for LED lighting.
    CRI 98
    Color rendering index 98; superior for LED lighting.
    CRI extended (R1-R15)
    Set of 15 color samples for detailed color rendering evaluation, beyond the standard 8 CRI samples.
    Crimping
    Mechanical joining technique for sheet metal LED fixture housings.
    Criteria LED strip selection
    Parameters for selecting LED strips: CCT, CRI, W/m, lm/m, IP.
    Critical angle
    Incidence angle beyond which total internal reflection occurs within a diffuser.
    Cross talk
    Interference between adjacent channels in a multi-channel controller.
    Cross-section
    Transverse view of the LED profile showing internal geometry: strip housing, diffuser housing, mounting flanges.
    CSA (Certification)
    Safety certification issued by the Canadian Standards Association for the North American market.
    Current density
    Current per unit area in the LED chip; affects efficiency and lifespan.
    Current limit
    Maximum current allowed through the LED chip without degradation.
    Current nominal
    Current value for optimal operating conditions.
    Current per meter strip
    Current drawn by the LED strip per linear meter.
    Current reverse
    Current flowing in the opposite direction in an LED; can cause damage.
    Current sensor
    Current sensing circuit for LED adjustment.
    Curve decay
    Graph showing luminous flux reduction of an LED over time (L70, L80, L90 useful life).
    Curve Kruithof
    Illuminance-CCT relationship for visual comfort.
    Curve luminous decay
    Graph of LED flux reduction over time; basis for maintenance factor (MF).
    Curve Planck
    Spectral distribution of a black body; reference for LED CCT.
    Curve V(λ)
    Spectral sensitivity curves of the human eye; lumens are weighted against these curves.
    Customization
    Customization of strips, profiles, or systems according to project specifications.
    Cut point
    Mark on the LED strip indicating where it can be safely cut without damaging the circuit.
    Cut-off angle
    Angle beyond which the light source is no longer directly visible; determines visual comfort.
    Cutting area
    Marked zone on a strip indicating where to cut.
    Cutting custom
    Service cutting LED strips to exact requested lengths at predefined cut points.
    Cutting diffuser
    Cutting the profile cover to match the LED profile length.
    Cutting pitch
    Minimum segment length of a cuttable LED strip.
    Cutting point
    Mark on the LED strip indicating the designated cutting location.
    Cutting profile custom
    Service cutting LED profiles to exact requested lengths.
    Cutting strip
    Operation of separating the LED strip at the preset mark.
    Cutting strip custom
    Service cutting LED strips to exact requested lengths.
    Cyan LED
    Cyan LED (490-510 nm); used to expand gamut in multi-channel systems.
    Cycle production
    Sequence of manufacturing phases for LED strips.
    Cyanoacrylate adhesive
    Instant adhesive for quick fixings of small LED components.
    ↑ Back to top

    D

    D65 (illuminant)
    CIE standard illuminant; average daylight at 6504K.
    Daisy chain cable
    Cable prepared for series connection of LED fixtures.
    DALI (Digital Addressable Lighting Interface)
    International standard protocol (IEC 62386) for digital control of professional lighting.
    DALI broadcast
    DALI command sent to all devices simultaneously.
    DALI bus
    Two-wire unpolarized communication line for DALI devices.
    DALI commissioning
    Configuration and addressing process for devices on a DALI network.
    DALI commissioning software
    Software for configuration and addressing of DALI LED devices.
    DALI DT6
    DALI standard Device Type 6, specific for LED driver control.
    DALI DT8
    DALI standard Device Type 8, specific for color and color temperature control.
    DALI gateway
    Interface converting signals from home automation systems (KNX, BACnet) to DALI protocol.
    DALI master
    Device generating commands on the DALI network; controller or gateway.
    DALI Monitor
    Software for monitoring and diagnostics of DALI LED networks.
    DALI power supply
    Dedicated power supply for the DALI bus providing communication voltage.
    DALI-2
    Evolution of the DALI protocol with backward compatibility and added features (sensors, diagnostics).
    Damp location
    Humid environment without direct water contact; minimum IP44.
    Damp proof membrane
    Waterproof membrane between wall and LED profile to prevent moisture ingress.
    Damp-rated
    LED fixture certified for humid environments.
    Damage from humidity
    LED component failures due to moisture penetration.
    Damage from overheating
    LED failures due to excessive temperature, reducing lifespan.
    Damage from overvoltage
    LED component failures caused by mains voltage spikes.
    Dark adaptation
    Eye adaptation to low light levels; warm LEDs facilitate the process.
    Dark corridor function
    DALI function maintaining LEDs at minimum brightness when no motion is detected.
    Dark sky compliant
    Fixture compliant with light pollution regulations.
    Dark spot
    Dark or under-illuminated area in an LED system; requires design correction.
    Dashboard monitoring
    Digital panel for real-time monitoring of the LED system.
    Dashboard smart home
    Digital control panel for managing smart LED lighting.
    Data cable
    Cable for transmitting LED control signals (DMX, DALI, SPI, Ethernet).
    Data logger
    Data recorder for monitoring LED operating conditions.
    Data logging
    Continuous recording of LED operating parameters.
    Data pin
    Data pin on addressable LED strips carrying color information per pixel.
    Data pin (addressable strip)
    Data transmission pin on addressable LED strips carrying color info.
    Data rate
    Transmission speed of LED control data.
    Datasheet
    Document containing all technical specifications of the LED product.
    Datasheet download
    Ability to download the LED product datasheet from the manufacturer's site.
    Daylight factor
    Ratio of indoor to outdoor illuminance; used to calculate natural light contribution.
    Daylight harvesting
    Automatic system adjusting LED output based on available natural light to save energy.
    Daylight integration
    Combining natural light with LED lighting for energy efficiency.
    Daylight sensor
    Photosensor measuring natural light contribution.
    Daylight spectrum
    Sunlight spectrum; reference for full-spectrum LED and HCL.
    Daylight white (5000-5700K)
    Color temperature similar to midday sunlight.
    dBm
    Radio signal power unit; indicates wireless controller range.
    DC (direct current)
    Electrical current with constant polarity; LED strips run on DC at 5V, 12V, 24V, or 48V.
    DC bus
    DC distribution line for LED power supply.
    DC power jack
    DC power socket on LED fixtures.
    DC-DC converter
    Converts one DC voltage to another; used in some LED drivers.
    Dead band
    Range where dimmer adjustments produce no perceptible brightness change.
    Dead load
    Self-weight of LED profile and components; used for structural support calculations.
    Dead pixel
    Faulty LED in an addressable strip that does not respond.
    Debounce
    Filtering of switch/button bounce in LED control circuits.
    Decay chromatic
    Shift in LED light color over time due to aging.
    Decay luminous
    Progressive reduction of LED luminous flux over time; critical for rated lifespan.
    Decay rate
    Speed of luminous flux decrease over time.
    Decision LED investment
    Cost-benefit analysis for choosing LED lighting.
    Decoder color
    Device translating digital signals into colors for RGB strips.
    Decoder DALI
    Process of translating DALI commands into LED driver adjustments.
    Decoder DMX
    Process of converting DMX512 signals into PWM values for LEDs.
    Decoder RGB
    Device converting DMX/DALI to three PWM channels for RGB strips.
    Decorative (profile)
    LED profile with distinctive aesthetic design, intended as a visible design element.
    Decorative application
    LED strips for aesthetic effects in residential and commercial spaces.
    Decorative light
    LED lighting primarily for aesthetic and decorative purposes.
    Decoration architectural
    Use of LED strips to highlight architectural features.
    Deep dimming
    Brightness reduction to very low levels (0.1–1%) without flicker.
    Default state
    Power-on state of an LED controller; configurable.
    Deflection
    Bending or deformation of an LED profile under its own weight or external loads.
    Deflection of the LED profile
    Bending of the profile between supports due to self-weight.
    Defrost function
    Defrost cycle in LED fixtures for cold rooms/freezers.
    Degradation of double-sided tape
    Adhesion loss over time from heat/humidity; 3M VHB performs better.
    Degradation of phosphor
    Aging of LED phosphor causing a color shift toward yellow.
    Degradation of the diffuser
    Yellowing or clouding of the LED diffuser over time.
    Degree of diffusion
    Percentage of LED light diffused by the cover vs. transmitted.
    Degree of diffusivity
    Percentage of light scattered by the diffuser vs. directly transmitted.
    Degree of opacity diffuser
    Opacity level of the LED diffuser; affects uniformity and light loss.
    Delay (programmed delay)
    Timed delay for LED on/off switching.
    Delta E
    Perceptible color difference between two LED sources (measured in CIE L*a*b* space).
    Delta T
    Junction-to-ambient temperature difference; should be minimized.
    Delta-uv (Duv)
    Distance of color point from blackbody curve in CIE diagram; indicates deviation from pure white.
    Demand response
    Automatic LED load reduction upon grid operator request.
    Demo LED lighting
    Pre-order demonstration of LED lighting effects.
    Density current
    Current per unit area in the LED chip; affects efficiency and lifespan.
    Density LED power
    LED power per unit area (W/m²).
    Density of LEDs per meter (LED/m)
    Number of LED chips per meter; ranges from 30 to 700+.
    Depth mixing
    Minimum distance between the LED strip and the diffuser to achieve uniform light.
    Depth profile
    Vertical profile dimension; determines recess depth.
    Depth recess
    Milling depth required to house a recessed LED profile.
    Derating
    Power reduction of a driver when ambient temperature exceeds limits.
    Description product
    Text describing LED product features and applications.
    Description technical
    Text explaining LED product technical specifications.
    Desiccant
    Moisture-absorbing material placed in IP-rated LED fixtures.
    Design bioclimatic
    Design integrating LED lighting with building solar orientation.
    Design circular
    LED design approach prioritizing material recycling and reuse.
    Design for disassembly
    Profile design facilitating easy disassembly and recycling.
    Design guide
    Manufacturer-provided guide for LED strip and profile installation.
    Design integrated
    Design approach where LED lighting is seamlessly integrated into architecture.
    Design luminous
    Lighting design as an aesthetic and functional architectural element.
    Design parametric
    LED design using variable parameters for automated optimization.
    Desktop controller
    Desk-mounted LED controller with knobs/faders for manual control.
    Desoldering
    Solder removal process for LED strip repair.
    Detectability
    Sensor's ability to detect presence to trigger LED lighting.
    Detection area
    Coverage area of a motion sensor for LED activation.
    Detection fault
    Identification of LED system faults for maintenance.
    Detection range
    Maximum sensor detection distance in LED applications.
    Detector (sensor)
    Device detecting physical quantities for LED control.
    Detector of smoke
    Smoke detector with integrated LED status indicator.
    Determination of required flux
    Calculation of required LED flux to meet target illuminance.
    Dew formation
    Condensation on LED profiles from thermal shock; risk with inadequate IP rating.
    Dew point
    Temperature at which condensation forms on LED components.
    Diagnostics
    Process of identifying and troubleshooting LED system faults.
    Diagonal cut
    45° cut of LED profiles for corner joints.
    Diagram block
    Block diagram of the LED system showing component connections.
    Diagram CIE 1931 chromaticity
    2D color representation chart; used for LED binning.
    Diagram connection
    Electrical connection diagram between LED components.
    Diagram Gantt
    Timeline schedule for LED lighting project phases.
    Diagram installation
    Graphic layout showing LED component placement.
    Diagram isocandela
    Map showing curves of equal luminous intensity for an LED fixture.
    Diagram isoilluminance
    Map showing curves of equal illuminance on a surface lit by LEDs.
    Diagram isolux
    Map showing curves of equal illuminance projected by an LED fixture.
    Diagram LED connection
    Wiring diagram showing LED strip to driver connections.
    Diagram LED installation
    Drawing with LED system installation instructions.
    Diagram LED principle
    Functional diagram of LED system components and connections.
    Diagram LED wiring
    Electrical wiring diagram for the LED system.
    Diagram luminous cone
    Graphic representation of overlapping LED light cones.
    Diagram polar
    Plot of LED intensity vs. angle.
    Diagram single-line
    Simplified single-line electrical diagram of the LED system with protections.
    Diagram system single-line
    Simplified electrical single-line diagram of the LED system.
    Diagram zoning
    Diagram of LED system zones with different levels/scenes.
    DIALux
    Free lighting calculation software for simulating LED installations.
    DIALux evo
    Advanced version of DIALux for professional LED design.
    DIALux plugin
    Manufacturer plugin for importing photometric data into DIALux.
    Die (LED chip)
    Semiconductor crystal forming the LED's light-emitting core.
    Die attach
    Bonding process attaching the LED die to the package substrate.
    Die size
    Dimensions of the LED semiconductor crystal; larger dies emit more light.
    Dielectric strength
    Maximum voltage the insulation can withstand without breaking down.
    Differential (switch)
    Residual-current device (RCD/GFCI) protecting against leakage currents.
    Diffraction
    Optical phenomenon where light bends around obstacles.
    Diffraction halo
    Optical effect creating a colored halo around LED sources viewed through textured surfaces.
    Diffused LED
    LED with integrated lens diffusing the beam for a milky appearance.
    Diffused light
    Uniformly distributed light without harsh shadows, achieved via opal diffusers/indirect lighting.
    Diffuser
    Optical cover (PMMA/polycarbonate) on LED profiles to homogenize light output.
    Diffuser asymmetric
    Diffuser with optical profile directing light preferentially in one direction.
    Diffuser black
    Dark diffuser for stealth appearance when LEDs are off.
    Diffuser click-in
    Snap-in diffuser secured by pressure.
    Diffuser clip
    Retaining clip holding the diffuser in the profile groove.
    Diffuser co-extruded
    Diffuser manufactured simultaneously with the profile in a single extrusion.
    Diffuser custom
    Custom-shaped, thick, or opacified diffuser.
    Diffuser decorative
    Diffuser serving aesthetic purposes alongside optical functions.
    Diffuser diamond
    Diamond-patterned diffuser for controlled light dispersion.
    Diffuser double-emission
    Diffuser allowing light emission from two opposite sides.
    Diffuser drop
    Teardrop-shaped cover for omnidirectional emission.
    Diffuser fabric
    Diffuser made of technical fabric for LED profiles with a soft and decorative effect.
    Diffuser flexible
    Bendable diffuser for curved profiles and neon flex.
    Diffuser gap
    Space between diffuser and LED strip; affects optical mixing.
    Diffuser graduated
    Diffuser with gradient opacity along its length for fade effects.
    Diffuser high-transmission
    High-transparency opal diffuser (>80% transmission).
    Diffuser honeycomb
    Hexagonal honeycomb grid on diffuser for anti-glare control.
    Diffuser magnetic
    Magnetically retained diffuser for easy access and maintenance.
    Diffuser material
    Material composition of the diffuser (PMMA, PC, silicone, glass).
    Diffuser micro-lenticular
    Diffuser with microlenses for optimized light distribution.
    Diffuser opal
    Translucent white diffuser for uniform light output.
    Diffuser pois
    Microdot-patterned cover to control diffusion and reduce pixelation.
    Diffuser prismatic
    Micro-prismatic surface diffuser for controlled light distribution.
    Diffuser retention
    Safety mechanism preventing accidental diffuser fall.
    Diffuser silicone
    Flexible silicone cover for curved profiles and neon flex.
    Diffuser UV-resistant
    UV-stabilized diffuser cover for outdoor use.
    Diffusion (of light)
    Uniform light spreading via translucent materials or textures eliminating hotspots.
    Digital lighting
    LED systems controlled exclusively via digital protocols.
    Digital signal processor (DSP)
    Processor handling LED control signal processing.
    Digital Twin
    Virtual replica of an LED system for simulation and real-time monitoring.
    Digitization
    Shift toward connected, digitally controllable LED systems.
    Dim level
    Set brightness level (0–100%).
    Dim range
    Supported dimming range of an LED driver.
    Dim-off
    Feature turning LEDs completely off at minimum dimmer setting.
    Dim-to-warm
    Simultaneous CCT and brightness reduction, mimicking incandescent dimming.
    Dimension milling
    Width and depth of routed cavity for recessed LED profiles.
    Dimension of the LED package
    External dimensions of the LED chip package (e.g., 2835 = 2.8x3.5mm).
    Dimension of the power supply
    Physical size of the LED driver for placement planning.
    Dimension of the profile housing
    Width and depth of the recessed cavity for the profile.
    Dimensions of the LED profile
    Width, height, and length of the aluminum LED profile.
    Dimensions of the LED strip
    Width, thickness, and length of the LED strip.
    Dimmer
    Device for continuously adjusting LED brightness.
    Dimmer 0-10V
    Analog dimmer sending a 0–10V DC signal to control driver brightness.
    Dimmer 0-10V wall-mounted
    Wall-mounted dimmer with 0–10V output for LED drivers.
    Dimmer 1-10V
    0–10V variant where 1V minimum (~10% light) replaces full off.
    Dimmer 1-10V wall-mounted
    Wall-mounted dimmer with 1–10V output for LED drivers.
    Dimmer adaptive
    Auto-detecting dimmer that identifies the connected LED load type.
    Dimmer Bluetooth
    Bluetooth-enabled dimmer for smartphone control.
    Dimmer Bluetooth portable
    Portable Bluetooth dimmer for remote LED control.
    Dimmer Bluetooth recessed
    Bluetooth dimmer designed for in-wall box mounting.
    Dimmer button
    Push-button dimmer; hold to adjust brightness.
    Dimmer capacitive
    Dimmer with integrated capacitive touch interface.
    Dimmer DALI recessed
    DALI dimmer for in-wall box mounting.
    Dimmer DALI touch
    DALI dimmer featuring a touch interface for adjustment.
    Dimmer DIN rail
    DIN-rail mounted dimmer for electrical distribution boards.
    Dimmer DIN-rail DALI
    DALI dimmer for DIN-rail mounting in electrical panels.
    Dimmer DMX
    Dimmer receiving DMX512 signals for professional LED control.
    Dimmer double-channel
    Dual-channel dimmer for dynamic white LED strips.
    Dimmer furniture
    Compact dimmer for cabinet/furniture LED lighting.
    Dimmer integrated profile
    Miniaturized dimmer built into the LED profile.
    Dimmer knob
    Rotary knob dimmer for intuitive control.
    Dimmer leading-edge
    Leading-edge (TRIAC) phase-cut dimmer; variable LED compatibility.
    Dimmer LED leading-edge
    Leading-edge dimmer optimized for LED compatibility.
    Dimmer LED-compatible
    Dimmer specifically tested/designed for LED driver compatibility.
    Dimmer miniaturized
    Ultra-compact dimmer for tight installation spaces.
    Dimmer multi-gang
    Multi-gang wall plate housing multiple dimmers for different zones.
    Dimmer multichannel
    Multi-channel dimmer for RGB/multicolor LED strips.
    Dimmer neon flex
    Specialized dimmer for LED neon flex strips.
    Dimmer outdoor
    Externally mounted dimmer for LED fixtures.
    Dimmer outdoor IP65
    IP65-rated dimmer for outdoor LED installations.
    Dimmer panel-mounted
    Panel-mounted dimmer for DIN-rail installation.
    Dimmer pedal
    Foot-operated dimmer for studios/workshops.
    Dimmer phase-cut
    Phase-cut dimmer (leading or trailing edge) chopping the AC sine wave.
    Dimmer PWM
    PWM-based dimmer using high-frequency pulse-width modulation.
    Dimmer recessed
    In-wall box mounted dimmer.
    Dimmer rotary
    Rotary knob dimmer.
    Dimmer scene recall
    Dimmer with memory for saving and recalling lighting scenes.
    Dimmer single channel
    Single-output dimmer for monochromatic strips.
    Dimmer slider
    Linear fader/slider dimmer.
    Dimmer three-channel
    Three-channel dimmer for RGB LED strip control.
    Dimmer touch
    Touch-sensitive dimmer for intuitive LED control.
    Dimmer trailing-edge
    Trailing-edge (MOSFET/IGBT) phase-cut dimmer; highly LED-compatible.
    Dimmer universal
    Compatible with both LED and traditional light sources.
    Dimmer universal KNX
    KNX dimmer compatible with LED, halogen, and fluorescent loads.
    Dimmer wall-mounted
    Wall-mounted dimmer with decorative faceplate.
    Dimmer with adjustable minimum
    Dimmer allowing adjustment of the minimum brightness threshold.
    Dimmer with display
    Dimmer featuring a brightness level display.
    Dimmer with feedback
    Dimmer receiving status feedback from the LED driver.
    Dimmer with light sensor
    Dimmer with integrated ambient light sensor for auto-adjustment.
    Dimmer with memory
    Dimmer retaining the last set brightness level after power loss.
    Dimmer with ramp
    Dimmer with programmable fade-in/fade-out times.
    Dimmer Zigbee recessed
    Zigbee dimmer for in-wall mounting.
    Dimmer Zigbee wall-mounted
    In-wall Zigbee dimmer for wireless LED control.
    Dimmer Zigbee portable
    Portable Zigbee dimmer for wireless control.
    Dimmer 433 MHz RF
    433 MHz RF dimmer for wireless LED control.
    Dimmer 868 MHz RF
    868 MHz RF dimmer for wireless LED control.
    Dimmer button
    Momentary push-button dimmer.
    Dimmer with logarithmic curve
    Dimmer with logarithmic curve matching human brightness perception.
    Dimmer WiFi remote
    Wi-Fi controllable dimmer accessible via app.
    Dimmer wireless
    Radio-controlled dimmer (RF, Zigbee, BT, Wi-Fi).
    Dimming
    Brightness adjustment process; analog (0–10V) or digital (PWM, DALI, DMX).
    Dimming 0 to 100%
    Full-range brightness adjustment from off to max.
    Dimming 0.1%
    Deep dimming capability down to 0.1% for hospitality/residential.
    Dimming 1 to 100%
    Brightness adjustment from 1% to max.
    Dimming 1 kHz PWM
    1 kHz PWM dimming for flicker-free LED strips.
    Dimming 10 kHz PWM
    10 kHz PWM dimming, flicker-free even in video recording.
    Dimming 20 kHz PWM
    20 kHz PWM dimming, beyond human hearing for silent operation.
    Dimming 0-10V analog
    Brightness control using a 0–10V analog signal.
    Dimming compatibility
    Ensuring proper operation between dimmer and LED driver.
    Dimming curves
    Graphs showing dimmer input vs. perceived LED brightness output.
    Dimming current-reduction
    Current-reduction dimming technique lowering DC to the LED chip.
    Dimming DALI digital
    Digital brightness control via the DALI protocol.
    Dimming deep
    Ability to dim to very low levels (0.1–1%) without flicker.
    Dimming DMX digital
    Digital brightness control via the DMX512 protocol.
    Dimming flicker
    LED flicker during dimming, usually from driver-dimmer mismatch.
    Dimming full range
    Full-range dimming 0-100% without dead zones.
    Dimming linear
    Linear dimming curve proportional to control signal.
    Dimming logarithmic
    Logarithmic dimming curve matching the eye's non-linear response.
    Dimming smooth
    Seamless, step-free brightness transitions.
    DIN 5035
    German indoor lighting standard; reference for LED projects.
    DIN rail
    Standardized metal rail for electrical panel component mounting.
    Diode
    Electronic component allowing current flow in one direction; LED is a light-emitting diode.
    Diode bridge
    Rectifier bridge for AC to DC conversion.
    Diode flyback
    Flyback diode protecting inductive circuits in LED drivers.
    Diode protection
    Anti-parallel diode protecting LEDs from reverse voltage.
    Diode rectifier
    Rectifier diode for AC/DC conversion in LED power supplies.
    Diode Schottky
    Low forward-voltage diode used in LED power circuits.
    Diode TVS (transient)
    Transient voltage suppression diode protecting against spikes.
    DIP switch
    Toggle switches for configuring LED driver addresses/parameters.
    Direct burial
    LED fixture/cable rated for direct ground burial.
    Direct drive
    Direct mains-powered LED operation without a separate driver (230V AC).
    Direct light ratio
    Percentage of light emitted downward in direct/indirect fixtures.
    Direct view
    Installation where LED strip is directly visible; requires COB/high density for uniformity.
    Direct/indirect (fixture)
    Profile emitting light both upward and downward.
    Direction of LED emission
    Light emission direction of the strip within the profile.
    Direction of LED light
    Strip emission direction: downlight, uplight, or side-emitting.
    Direction of luminous flux
    Light emission direction: frontal, lateral, or upward.
    Direction of mounting strip
    LED strip installation orientation; observe polarity arrows.
    Direction of power supply
    Power injection side of the LED strip, marked on the PCB.
    Directional LED
    LED with focused beam via integrated optics.
    Dirt depreciation factor
    Flux reduction multiplier accounting for dirt accumulation on diffusers.
    Disconnect switch
    Isolator switch for safely disconnecting the LED circuit.
    Disco LED
    LED lighting for nightclubs featuring dynamic RGB effects.
    Discrete LED
    Individual packaged LED for point-source applications.
    Dispersion chromatic
    Color inconsistency along a strip or between fixtures.
    Displacement ventilation
    Ventilation method aiding heat dissipation from ceiling LED profiles.
    Display LED
    LED matrix panel for graphics and video.
    Dissipation per meter
    Heat output per linear meter of LED profile (W/m).
    Distance between fixing points
    Spacing between profile mounting clips/screws.
    Distance dimming
    Brightness adjustment based on object proximity.
    Distance from the diffuser
    Gap between strip and diffuser affecting light uniformity.
    Distance maximum controller
    Max cable length between controller and strip without signal degradation.
    Distance mixing
    Required LED-to-diffuser distance for seamless RGB color blending.
    Distance power supply
    Cable run length from power supply to LED strip.
    Distance reading
    Distance at which text remains legible under the lighting.
    Distance spacing
    Optimal spacing between parallel profiles for uniform lighting.
    Distance to driver
    Driver-to-strip cable length; critical for voltage drop calculations.
    Distance to fixture
    Layout spacing between LED luminaires.
    Distortion aberration
    Image deformation produced by an uncompensated LED lens.
    Distributed control
    Decentralized LED control using multiple local controllers.
    Distributed driver
    System using multiple localized LED drivers instead of one central unit.
    Distribution asymmetric
    Asymmetric beam pattern for wall washing or path lighting.
    Distribution batwing
    Batwing intensity distribution for uniform horizontal illumination.
    Distribution board
    Electrical panel housing circuit protections for LED systems.
    Distribution harmonic
    Harmonic distortion content of LED power supply current.
    Distribution Lambertian
    Ideal cosine-based intensity distribution typical of many LEDs.
    Distribution LED fixture
    Spatial layout of LED light points in a room.
    Distribution luminous
    Luminance mapping across an LED diffuser surface.
    Distribution network
    Retail/distribution network ensuring widespread LED product availability.
    Distribution of light points
    Planar arrangement of LED fixtures.
    Distribution photometric
    Light distribution curve/diagram of an LED fixture.
    Distribution spatial
    3D arrangement of LED lighting in a space.
    Distribution spectral power
    Spectral Power Distribution (SPD) graph showing emitted wavelengths.
    Distributor
    Company distributing LED products from various manufacturers.
    DMX cable
    110-ohm shielded cable specifically for DMX512 signals.
    DMX controller software
    PC software for generating and editing DMX sequences.
    DMX daisy chain
    Serial connection method for DMX devices.
    DMX decoder
    Device converting DMX512 data into PWM signals for LED strips.
    DMX in/out
    DMX signal input and output connectors.
    DMX merger
    Device combining multiple DMX universes/streams into one.
    DMX mini controller
    Compact DMX controller for small-scale LED setups.
    DMX mode
    Defines how many DMX channels a fixture uses.
    DMX over IP
    Transmission of DMX data over Ethernet networks (Art-Net/sACN).
    DMX recorder
    Device capturing and storing DMX sequences for playback.
    DMX scene controller
    DMX controller with preset scene memory.
    DMX splitter
    Device amplifying and isolating DMX signals across multiple outputs.
    DMX terminator
    120Ω resistor placed at the end of a DMX line to prevent signal reflection.
    DMX tester
    Handheld tool for diagnosing DMX signal integrity.
    DMX512
    Standard digital protocol for theatrical/architectural lighting control (512 channels/universe).
    Docking station (LED)
    Charging/mounting base for portable LED work lights.
    Documentation as-built
    Final documentation reflecting the installed LED system configuration.
    Documentation commercial
    Catalogs, price lists, and brochures for LED products.
    Documentation maintenance
    Logbook recording LED system maintenance activities.
    Documentation project
    Complete set of technical documents for an LED lighting project.
    Documentation regulation
    CE certificates, compliance declarations, and test reports.
    Documentation technical
    Collection of datasheets, certificates, and installation manuals.
    Documentation testing
    Commissioning test reports for the installed LED system.
    Dome LED
    LED lighting solutions for architectural domes/ceilings.
    Dome lens
    Dome-shaped protective cover diffusing the LED beam.
    Domotics
    Home automation technologies including intelligent LED lighting control.
    Door sensor
    Contact sensor triggering automatic LED lighting upon door opening.
    Doping (semiconductor)
    Semiconductor doping process creating p-n junctions in LEDs.
    Dormer LED
    LED lighting designed for dormer windows/attic spaces.
    Dosing LED light
    Fine-tuning LED intensity for optimal ambient levels.
    Dot spacing
    Distance between individual LEDs; affects dot-free appearance behind diffusers.
    Dot-free
    Characteristic of LED strips appearing as a continuous line without visible hotspots.
    Dotless (strip)
    Strip producing uniform illumination without visible LED points through a diffuser.
    Double channel (strip)
    Two-channel LED strip, typically for tunable white/CCT.
    Double chip (LED)
    LED package containing two semiconductor dies for higher output.
    Double diffuser
    Profile featuring two diffusers for bidirectional light emission.
    Double feed
    Power injection from both ends of an LED run.
    Double power supply
    End-fed power injection method to minimize voltage drop.
    Double power supply strip
    LED strip powered from both ends for uniform brightness.
    Double profile
    Installation of two LED profiles side-by-side for bidirectional lighting.
    Double strip
    Dual parallel LED strip configuration for doubled luminous flux.
    Double-sided tape
    Adhesive tape used as the standard mounting method for LED strips.
    Double-sided tape acrylic
    Acrylic-based adhesive; excellent resistance to temperature and UV.
    Double-sided tape rubber
    Synthetic rubber-based adhesive; good initial adhesion but lower thermal resistance.
    Down-converter
    Phosphor/filter converting high-energy photons to lower-energy (longer wavelength) light.
    Down/up light
    Fixture emitting light both downward and upward.
    Downlight LED
    Recessed ceiling LED fixture; modern alternative to traditional halogen downlights.
    Downlight retrofit
    Conversion kit replacing traditional downlight sources with LED modules.
    Downlight trimless
    Frameless recessed downlight for a seamless ceiling finish.
    Draft stopper
    Gasket sealing profile recesses against air drafts.
    Drain wire
    Grounding wire connected to cable shielding.
    Drainage hole
    Vent/drain hole in IP65-rated profiles to prevent condensation buildup.
    Draw wire
    Pull wire for routing LED cables through conduits/ceilings.
    Drawing execution
    Final technical drawing for LED system construction.
    Drawing installation
    Electrical layout diagram showing LED fixture locations.
    Drawing LED installation
    Installation diagram with mounting instructions.
    Drip loop
    Cable loop preventing water from running into electrical connections.
    Driver
    LED driver with integrated DALI interface for digital dimming.
    Driver 12V constant voltage
    12V DC constant-voltage driver for LED strips.
    Driver 24V constant voltage
    24V DC constant-voltage driver for professional LED strips.
    Driver 48V constant voltage
    48V DC constant-voltage driver for long-run LED strips.
    Driver 1050mA constant current
    1050mA constant-current driver for high-power LED modules.
    Driver 1400mA constant current
    1400mA constant-current driver for very high-power fixtures.
    Driver 350mA constant current
    350mA constant-current driver for standard power LEDs.
    Driver 500mA constant current
    500mA constant-current driver for LED modules.
    Driver 700mA constant current
    700mA constant-current driver for high-power LEDs.
    Driver for addressable strip
    Power supply sized for addressable LED strips with adequate current.
    Driver multi-output
    LED driver with multiple independent outputs for separate strip groups.
    Driver with backup
    Redundant LED driver for quick fault replacement.
    Driver with DIP switch
    LED driver featuring DIP switches for output current selection.
    Driver with fan
    Actively cooled LED driver with built-in fan for high-power applications.
    Driver with programmable output
    Configurable LED driver (current, dimming curve, thermal protection) via software.
    Driver with PWM output
    PWM-output LED driver for flicker-sensitive strip applications.
    Droop (efficiency droop)
    LED efficiency decline at high drive currents.
    Drum dimmer
    Rotary drum dimmer used in theatrical LED setups.
    Dry contact
    Voltage-free relay contact for interfacing sensors with LED systems.
    Dry film photoresist
    Photosensitive film used in LED strip PCB manufacturing.
    Dry location
    Indoor environment with no moisture; suitable for IP20 strips/drivers.
    Drywall integration
    Recessed LED profile installation in plasterboard for seamless architectural lines.
    Drywall with preformed housing
    Plasterboard with pre-milled grooves for direct LED profile insertion.
    DT (Device Type)
    DALI classification identifying device function (DT6=driver, DT8=color).
    Dual band Wi-Fi
    2.4/5 GHz Wi-Fi connectivity for reliable LED controller communication.
    Dual CCT
    LED strip with two fixed color temperatures on separate circuits.
    Dual color LED
    LED package emitting two distinct colors.
    Dual driver
    Power supply with two independent output channels.
    Dual function (emergency)
    Fixture operating as both standard and emergency lighting.
    Dual output driver
    LED driver powering two separate strip circuits.
    Dual white
    See Tunable white. Strip with warm and cool whites for CCT adjustment.
    Dual-mode (controller)
    Controller supporting both standalone and networked operation.
    Duct
    Conduit for routing LED cables in ceilings/walls.
    Duct cover
    Element protecting the cable entry point in the LED profile.
    Duct IP20
    Plastic duct for routing LED cables in indoor environments.
    Duct IP65
    Watertight duct for routing LED cables in outdoor environments.
    Durability
    Ability to maintain performance over time under real-world conditions.
    Durability of the LED system
    Total expected operational lifespan before system replacement.
    Dust accumulation
    Deposition of particles on the LED diffuser that reduces luminous flux over time.
    Dust cover
    Protective cap for unused LED connectors.
    Dust tight
    Complete protection against dust ingress (IP6X).
    Dust-tight (IP6X)
    First digit '6' in IP code indicating total dust protection.
    Duty cycle
    PWM on-time ratio determining perceived LED brightness.
    Duty cycle (power supply)
    Switching circuit on-time ratio in power converters.
    Duv
    See Delta-uv. Deviation of LED color point from the Planckian locus.
    DVI (for LED video)
    Digital video interface for driving LED displays/matrices.
    Dynamic color
    Continuous color-changing effects via RGB controllers.
    Dynamic effect
    Moving or transitioning light patterns on LED strips.
    Dynamic range
    Ratio between minimum and maximum controllable brightness.
    Dynamic scene
    Lighting scene with automated temporal variations in color/intensity/CCT.
    Dynamic white
    See Tunable white. Adjustable color temperature system.
    Dynamic white (Dynamic White)
    See CCT Tunable. Real-time warm-to-cool temperature adjustment.
    ↑ Back to top

    E

    Earth leakage current
    Leakage current to earth; limited by standards.
    Earthing
    Grounding of the LED system; mandatory for Class I fixtures.
    Earthing (grounding)
    Connection of the profile or LED fixture to the protective conductor.
    Earthing clamp
    Earth terminal for connecting the LED profile to the PE conductor.
    Earthing conductor
    Yellow-green protective conductor connected to the mass of the LED fixture.
    Earthquake resistant LED
    LED fixture designed to withstand seismic stresses.
    Easy connect
    Plug-and-play quick connection system for LED strips and profiles.
    Easy install
    Quick mounting system for LED profiles without special tools.
    Easy install bracket
    Simplified mounting bracket for quick installation of the LED profile.
    Eave lighting
    LED lighting under the roof eaves; for residential facades.
    Eave mount
    Mounting of LED strip under the roof eaves.
    Excellence in LED lighting
    Higher level of quality and service in the LED sector.
    Echo cancellation
    Reduction of echo in LED control signals on long lines.
    Eclipse (profile)
    Commercial name for suspended round LED profiles.
    Eclipse effect
    Optical halo effect around a matte element backlit by LEDs.
    Eco mode
    Energy saving mode that reduces consumption at no-load.
    Eco-friendly LED
    LED product with low environmental impact over its lifetime.
    Eco-label
    Ecological label certifying the sustainability of the LED product.
    Economics of LED lighting
    Economic aspects of adopting LED technology.
    Economic analysis LED
    Economic analysis of investment in LED lighting: ROI and payback.
    Eddy current loss
    Losses due to parasitic currents in the magnetic cores of the LED driver.
    Edge connector
    Connector on the edge of the LED strip.
    Edge connector pin
    Pin of the edge connector on the LED strip for quick connection.
    Edge connector strip
    Connector that clips onto the cut edge of the LED strip.
    Edge glow
    Luminous glow on the edge of the LED diffuser.
    Edge illuminated LED
    Edge of an architectural element illuminated with LED strip.
    Edge lighting
    Lateral lighting of a transparent or translucent panel via LED strips positioned on the edge.
    Edge luminous
    Recessed or surface-mounted LED profile installed along edges of shelves, steps, or furniture for a linear effect.
    Edge luminous step
    LED strip on the edge of the step for safety and decoration.
    Edge mounting
    Mounting of the LED profile along the edge of a surface.
    Edge of cutting
    Margin of the strip after cutting; to be protected with silicone.
    Edge protection
    Protection of the cut edges of the LED strip with silicone or caps.
    Edge-lit panel
    LED panel illuminated from the edge with a light guide.
    Edgeband lighting
    LED lighting inserted into the edge of shelves and racks.
    Edison screw
    Screw fitting for LED retrofit lamps; E14 (small) and E27 (large).
    Educational LED lighting
    LED lighting for schools and educational institutions.
    Educational lighting
    LED lighting for school and educational environments; low UGR and uniformity.
    Effect candle
    Simulation of a flickering flame on LED strips for ambiance.
    Effect contour
    LED strip behind an object or panel to create a luminous outline.
    Effect display
    LED strip behind an object or panel to create a luminous outline.
    Effect flow
    Continuous flow of colors running along the LED strip.
    Effect frame
    LED strip hidden in a frame for indirect perimeter lighting.
    Effect ice
    Blue and white tones slowly moving on LED strips.
    Effect lava
    Slowly moving color bubbles on addressable LED strips.
    Effect lightning
    Simulation of lightning with quick flashes on LED strips.
    Effect meteor
    Luminous point with long trail falling on the LED strip.
    Effect noise
    Random pattern of colors and brightness on addressable LED strips.
    Effect ocean
    Undulating blue and green tones on LED strips for a marine effect.
    Effect police
    Alternating red and blue flashing on LED strips.
    Effect rainbow
    Cyclic multicolor pattern on addressable LED strips.
    Effect ripple
    Luminous undulation propagating on addressable LED strips.
    Effect snow
    Snow effect with white points falling on LED strips.
    Effect thunder
    Simulation of thunder with flash and dimming on LED strips.
    Effect tunnel
    Quantum phenomenon in the LED semiconductor.
    Effect washing
    Uniform distribution of LED light over a large surface.
    Effect waterfall
    Light effect descending like a waterfall on vertical LED strips.
    Effect wave
    Undulating movement of light along the LED strip.
    Effective area
    Area effectively illuminated by the LED system at the required level.
    Effective illumination
    Effective illuminance on the target surface after all LED system losses.
    Effective lumens
    Lumens of the fixture after optical and thermal losses.
    Efficacy of the LED system
    Lumens emitted by the complete fixture per watt consumed.
    Efficiency class
    Energy efficiency class of the LED fixture according to EU regulations.
    Efficiency curves
    Graph of LED luminous efficacy as a function of current.
    Efficiency droop
    Drop in LED efficiency with increasing current; intrinsic chip phenomenon.
    Efficiency improvement
    Improvement of LED system efficiency through component optimization.
    Efficiency loss
    Efficiency loss in the LED system due to driver, optics, and temperature.
    Efficiency of the diffuser optical
    Percentage of light passing through the diffuser; opal ~70%, transparent ~95%.
    Efficiency of the LED driver
    Ratio between driver output and input power; typically >90%.
    Efficiency of the LED profile
    Ratio between light exiting the profile and light from the strip; depends on the diffuser.
    Efficiency of the LED strip
    Luminous efficacy of the LED strip; in lm/W.
    Efficiency of the power supply
    Ratio between output power and mains power drawn; professional supplies exceed 90%.
    Efficiency of the system
    Overall efficiency considering LED chip, driver, diffuser, and heat dissipation; always lower than chip-only efficacy.
    Efficiency overall system
    Ratio between useful light and power consumed by the entire LED system.
    Efficiency phosphor conversion
    Percentage of blue photons converted to white by the LED phosphor.
    Efficiency quantum
    Ratio between emitted photons and injected electrons in the LED chip.
    Efficiency rating
    Classification of the complete LED fixture’s efficiency.
    Egg crate louver
    Square-cell anti-glare grid for LED fixtures.
    E-ink LED backlight
    Backlighting for e-ink displays; features reduced power consumption.
    Elapsed time indicator
    Indicator of elapsed operating time for LED maintenance.
    Elastic mount
    Elastic mounting of the LED profile for vibration absorption.
    Elastomer (gasket)
    Material for IP gaskets in outdoor LED profiles.
    Elbow connector
    Elbow connector for corner connections in LED cables.
    Electric field
    Field generated by the voltage applied to the LED chip; drives charge carriers.
    Electric panel
    Electrical panel with protections and power supplies for the LED system.
    Electric shock protection
    Protection against electric shocks; guaranteed by SELV/PELV.
    Electrical bonding
    Equipotential connection between metallic parts of the LED system.
    Electrical clearance
    Safety distance between parts at different voltages in the LED driver.
    Electrical drawing
    Electrical diagram of the LED system with symbols and connections.
    Electrical enclosure
    Electrical cabinet for power supplies and LED controllers.
    Electrical load calculation
    Calculation of total electrical load of the LED system for sizing.
    Electrical noise
    Electrical noise that can cause malfunction or flicker in LEDs.
    Electrical plan
    Electrical installation plan showing LED fixture and circuit placement.
    Electrical power consumption
    Power absorbed by an LED system from the mains; measured in Watts or kWh.
    Electrical safety test
    Electrical safety test on LED fixtures: strength, insulation, leakage.
    Electrical schematic
    Detailed electrical diagram of the LED system.
    Electrical specification
    Electrical specifications of the LED product: voltage, current, power.
    Electro-optical conversion
    Conversion of electrical energy into light in the LED chip.
    Electrode
    Electrical terminal of the LED chip: anode and cathode.
    Electrode gap
    Distance between electrodes in the LED; a production process parameter.
    Electroluminescence
    Luminous emission due to electric field; fundamental principle of LEDs.
    Electrolytic capacitor
    Electrolytic capacitor in the LED driver for voltage filtering.
    Electromagnetic compatibility test
    EMC test to verify compliance of the LED fixture.
    Electromagnetic relay
    Electromechanical relay for switching LED circuits.
    Electromagnetic spectrum
    Full spectrum of radiation; visible light is the 380–780 nm portion.
    Electron
    Negatively charged particle; electron flow in LEDs generates light.
    Electron-hole recombination
    Electron-hole recombination in the LED junction that generates photons.
    Electronic ballast
    Electronic reactor; bypassed during LED retrofits.
    Electronic ballast bypass
    Removal of the electronic ballast for direct LED tube installation.
    Electronic control gear
    Electronic LED driver compliant with EN 61347 standard.
    Electronic dimmer
    Dimmer based on electronic components (MOSFET, IGBT) for LEDs.
    Electronic fuse
    Electronic fuse with automatic reset for LED protection.
    Electronic label
    Electronic label with LED display for retail shelves.
    Electronic timer
    Electronic timer for programming LED lighting.
    Electronic transformer
    High-frequency electronic transformer; LED compatibility must be verified.
    Electrostatic discharge (ESD)
    Discharge that can damage LED chips; protection required.
    Element decorative
    Architectural component with integrated LED strip for decoration.
    Element of finish
    Aesthetic accessory completing the LED profile: end cap, joint.
    Elevated temperature test
    LED operation test at temperatures above nominal.
    Elevation angle
    Vertical aiming angle of an LED fixture.
    Elevator lighting
    LED lighting for elevator cabins; slim and vandal-resistant profiles.
    ELG (Mean Well series)
    Mean Well power supply family with 3-in-1 dimmable input.
    Elimination of LED points
    Achieving continuous light without visible points using COB or high-density strips.
    Ellipse MacAdam
    Area in the CIE diagram of perceptible chromatic tolerance.
    Elliptical beam
    LED light distribution with elliptical cross-section.
    Elongated profile
    LED profile with vertically elongated rectangular cross-section.
    Elongation (strip)
    Stretching of flexible LED strip under tension; must not be exceeded.
    Elongation at break
    Elongation to rupture of the flexible LED strip material.
    Elumtools
    Revit plugin for LED lighting calculations directly in the BIM model.
    ELV (Extra Low Voltage)
    Extra-low voltage (≤50V AC or ≤120V DC); most LED strips operate in ELV.
    Embedded controller
    LED controller integrated into the profile or fixture.
    Embedded driver
    Driver integrated into the profile; not visible externally.
    Embedded lighting
    LED lighting fully integrated and invisible in the architectural structure.
    Embedded sensor
    Sensor integrated into the LED profile.
    EMC (electromagnetic compatibility)
    Regulatory requirement that LED fixtures neither emit nor are sensitive to electromagnetic interference.
    Emergency ballast
    See Emergency power supply. Battery for LED operation during blackout.
    Emergency ballast conversion
    Conversion of a standard LED fixture to emergency use with a dedicated kit.
    Emergency charge indicator
    LED indicator showing the state of charge of the emergency battery.
    Emergency circuit
    Dedicated electrical circuit for emergency LED lighting.
    Emergency compliance
    Compliance of the emergency LED system with EN 1838 and EN 50172 standards.
    Emergency conversion kit
    Kit to convert a fixture for emergency use.
    Emergency corridor
    Path illuminated with emergency LEDs for evacuation.
    Emergency design
    Design of emergency LED lighting compliant with regulations.
    Emergency driver
    LED driver specifically for emergency operation with battery.
    Emergency duration
    Emergency lighting duration; typically 1 or 3 hours.
    Emergency escape route
    Escape path illuminated with emergency LEDs.
    Emergency exit LED
    LED fixture with pictogram indicating emergency exits.
    Emergency exit sign
    Emergency exit sign illuminated by LEDs.
    Emergency fixture
    LED fixture with integrated or dedicated emergency function.
    Emergency indicator
    LED indicator of emergency module status (charge, test, fault).
    Emergency inverter
    Circuit converting battery voltage to power LEDs during emergency.
    Emergency lamp
    Portable emergency LED lamp with rechargeable battery.
    Emergency LED module
    Complete module with LED, battery, and circuit for emergency lighting.
    Emergency lighting
    LED system with integrated battery that automatically activates upon mains failure.
    Emergency lighting calculation
    Lighting calculation specific to emergency LED lighting.
    Emergency lighting plan
    Plan of emergency LED lighting compliant with standards.
    Emergency lighting standard
    EN 1838 standard for emergency LED lighting requirements.
    Emergency luminaire
    LED fixture dedicated to emergency lighting.
    Emergency maintenance
    Maintenance of the emergency LED system: battery and functionality tests.
    Emergency mode
    LED operation mode during blackout using battery power.
    Emergency power pack
    Battery module to power emergency LEDs during blackout.
    Emergency rating
    Classification of the LED fixture for emergency operation.
    Emergency run time
    Duration of LED operation in emergency; typically 1 or 3 hours.
    Emergency self-test
    Automatic periodic test of the emergency LED module with report.
    Emergency signage
    Emergency signage illuminated with LEDs to indicate escape routes.
    Emergency start-up time
    Time for emergency LEDs to switch on after mains interruption.
    Emergency status LED
    LED indicator of emergency module status: charge, fault, test.
    Emergency supply unit
    Emergency power supply unit for LEDs with integrated battery.
    Emergency switching
    Automatic switching from normal to emergency LED power supply.
    Emergency test button
    Button for periodic testing of the emergency module.
    Emergency test log
    Log of periodic tests of the emergency LED lighting.
    Emergency test schedule
    Schedule of mandatory periodic tests for emergency LEDs.
    EMF (electromotive force)
    Potential difference driving current in the LED circuit.
    EMI (Electromagnetic Interference)
    Electromagnetic interference; switching drivers can generate it.
    Emission angle
    Total angle within which the LED emits light; defined by package and optics.
    Emission angle control
    Control of LED emission angle via optics and diffusers.
    Emission band
    Spectral emission width of the LED; narrow for monochromatic LEDs.
    Emission COB continuous
    Continuous light without visible LED points from COB strips; dot-free.
    Emission direct downward
    LED light emitted directly toward the lower surface.
    Emission indirect upward
    LED light emitted toward the ceiling for diffuse reflection.
    Emission Lambertian
    Cosine light distribution; typical of LEDs without secondary optics.
    Emission lateral (side-emitting)
    LED strip with luminous emission perpendicular to the mounting surface; chips mounted on the side (e.g., SMD 335).
    Emission of colored light
    Colored LED light obtained with RGB or monochromatic chips.
    Emission of white light
    White LED light obtained from blue chips with conversion phosphor.
    Emission order
    Sending the purchase order for LED products to the supplier.
    Emission profile luminous
    Total luminous flux exiting the LED profile after diffuser losses.
    Emission wavelength
    Wavelength of LED chip emission; determines the color.
    Emissivity
    Emissivity of the LED profile surface; influences radiative heat exchange.
    Emittance
    Radiant power per unit surface area.
    Emittance luminous
    Luminous flux emitted per unit area from the LED diffuser surface.
    Emitter
    Element that emits light; the LED chip is the emitter of the strip.
    Emitter (LED)
    The LED chip that emits light; synonym of die or source.
    EN 12193
    European standard for sports facility lighting.
    EN 12665
    Standard on fundamental lighting terms and criteria.
    EN 13032-1
    Standard for photometric measurement of lamps and LED fixtures.
    EN 13032-4
    Standard for photometric measurement of LED modules.
    EN 15193
    Standard for energy requirements of building lighting.
    EN 15193-1
    Calculation of lighting energy consumption according to the standard.
    EN 40
    Standard for street lighting poles for LED fixtures.
    EN 50171
    Standard for centralized emergency power supply systems.
    EN 50172
    Standard for emergency lighting systems for escape routes.
    EN 55015
    Standard on electromagnetic emissions of LED fixtures.
    EN 60061
    Standard on lamp bases; relevant for LED retrofit.
    EN 60529
    Standard on IP protection degrees for LED fixture enclosures.
    EN 60598-2-1
    Standard for fixed general-use LED fixtures.
    EN 60598-2-2
    Standard for recessed LED fixtures.
    EN 60598-2-22
    Standard for emergency LED fixtures.
    EN 61000-3-2
    Standard on current harmonics of LED power supplies.
    EN 61000-4-2
    Standard on ESD immunity for LED fixtures.
    EN 61000-4-5
    Standard on surge immunity for LED drivers.
    EN 61347-1
    Safety standard for LED power supply devices.
    EN 61347-2-13
    Standard specific to constant-current and constant-voltage LED drivers.
    EN 62384
    Standard on performance of AC or DC LED drivers.
    EN 62386-101
    DALI standard part 101: general protocol.
    EN 62386-102
    DALI standard part 102: control devices.
    EN 62386-207
    DALI standard part 207: LED gear.
    EN 62386-209
    DALI standard part 209: device type 8 for color control.
    EN 62471-1
    Standard on photobiological safety of lamps and LED fixtures.
    EN 62493
    Standard on EMF assessment of LED fixtures.
    EN 62717-1
    Standard on performance of LED modules.
    EN 62722-2-1
    Standard on performance of LED fixtures.
    EN 62776
    Standard for LED tubes replacing fluorescent tubes.
    Enamel coating
    Enamel coating for LED profiles in decorative applications.
    Encapsulated driver
    LED driver encapsulated in resin for full IP protection.
    Encapsulated LED
    LED protected by a resin housing for environmental resistance.
    Encapsulated LED strip
    LED strip fully encapsulated in silicone or resin for IP67/68.
    Enclosed fixture
    LED fixture with closed enclosure limiting ventilation; requires derating.
    Enclosure
    Protective housing for power supply or controller; IP rating indicates protection level.
    Enclosure rating
    Protection rating of the LED power supply enclosure (IP20, IP65, IP67).
    Enclosure temperature
    Temperature inside the LED power supply enclosure.
    Encoder (rotary)
    Digital knob on LED controller for precise parameter adjustment.
    End bell
    End closure for circular tubes and LED profiles.
    End cap
    End cap of the LED profile, with or without cable gland hole for power cable exit.
    End cap aluminum
    Aluminum end cap matching the LED profile.
    End cap with cable gland
    End cap with gasket to maintain the profile’s IP rating.
    End cap with hole
    Perforated end cap for power cable passage to the LED strip.
    End connector
    Terminal connector for powering the LED strip at the end.
    End feed
    Powering the LED strip from the end; standard configuration.
    End glow fiber
    Optical fiber emitting only from the tip; for LED star ceilings.
    End plate
    End plate of the LED profile; synonym of end cap.
    End seal
    Terminal sealing of the LED strip for IP protection.
    End splice
    Terminal junction between LED strip and power cable.
    End trim
    Decorative finish of the LED profile end.
    End user
    Final user of the installed LED system.
    End-of-life (EOL)
    End of useful lifetime; luminous flux below L70 or L80 threshold.
    End-of-line resistor
    Termination resistor on DALI or DMX bus for correct operation.
    End-to-end connection
    Direct connection between two adjacent LED profiles without gap.
    Endcap with cable hole
    LED profile end cap with hole for cable passage.
    Endcap without hole
    Blind end cap of the LED profile; side without cable exit.
    Endurance rating
    Guaranteed component lifetime under specified conditions.
    Endurance test
    Extended duration test to verify LED component reliability.
    ENEC (certification)
    European safety certification for lighting fixtures; complements CE marking.
    ENEC mark
    European certification mark for LED fixtures.
    Energy audit
    Building energy analysis; LED lighting reduces consumption by 50–80%.
    Energy bill reduction
    Energy bill reduction achieved with LED lighting.
    Energy certification
    Building energy certification to which LED lighting contributes.
    Energy class
    EU energy classification of LED fixtures (A–G).
    Energy code
    Local energy code imposing power limits for LED lighting.
    Energy code compliance
    Compliance of the LED system with current energy codes.
    Energy consumption
    Total power drawn including power supply; expressed in kWh.
    Energy consumption monitoring
    Continuous monitoring of LED system energy consumption.
    Energy efficiency directive
    EU directive on energy efficiency as applied to LED lighting.
    Energy efficiency ratio
    Ratio between emitted lumens and watts consumed by the entire LED system.
    Energy harvesting
    Harvesting energy from the environment (light, vibrations) to power LED sensors.
    Energy label
    Mandatory EU energy label on LED fixtures.
    Energy management system
    Energy management system including LED lighting control.
    Energy meter
    Electrical energy meter to monitor LED system consumption.
    Energy monitoring
    Real-time monitoring of LED system energy consumption.
    Energy payback
    Time to recover LED investment in terms of energy savings.
    Energy performance
    Energy performance of the LED system: consumption, efficiency, savings.
    Energy recovery
    Energy recovery in advanced LED circuits to maximize efficiency.
    Energy reduction target
    Target for reducing energy consumption via LED lighting.
    Energy report
    Report on LED system energy consumption with analysis and recommendations.
    Energy saving
    Energy savings achieved with LED lighting compared to conventional sources.
    Energy saving mode
    Energy-saving mode with automatic LED brightness reduction.
    Energy Star
    U.S. certification for high energy efficiency LED fixtures.
    Energy storage system
    Energy storage system for powering LEDs from renewable sources.
    Engagement lighting
    Interactive LED lighting engaging users with effects and colors.
    Engine room LED
    LED lighting for machine rooms; resistant to vibrations and oils.
    Engineered spectrum
    LED spectrum engineered for specific applications (horticulture, museum, food retail).
    Engineering drawing
    Detailed technical drawing of the LED profile with dimensions and tolerances.
    Engineering specification
    Detailed engineering specification for the LED project.
    Enhanced color rendering
    Enhanced color rendering; R9 > 90 for saturated red.
    Enhanced dimming
    Advanced dimming with logarithmic curves and deep dimming down to 0.1%.
    Enhanced spectrum LED
    LED with enriched spectrum for better color rendering.
    EnOcean
    Energy-harvesting wireless protocol used in battery-free lighting control systems.
    EnOcean sensor
    Energy-harvesting wireless sensor compatible with EnOcean LED systems.
    Entrance hall lighting
    LED lighting for building lobbies and entrances.
    Entrance lighting
    LED lighting for building entrances and lobbies.
    Entry angle
    Incident angle of light into the diffuser; affects refraction and distribution.
    Entry connector
    Input connector for LED fixture power supply.
    Envelope (curves)
    Envelope curves defining safe LED operating parameters (SOA).
    Environmental acidity
    Environmental acidity level influencing the choice of LED materials.
    Environmental compliance
    Compliance of LED products with environmental regulations (RoHS, WEEE).
    Environmental condition
    Environmental conditions (temperature, humidity, dust) at the LED installation site.
    Environmental control
    Integrated management of LED lighting and building HVAC.
    Environmental impact
    Environmental impact of LED lighting over its complete life cycle.
    Environmental protection
    Protection of the LED system against environmental factors (water, dust, gases, UV).
    Environmental rating
    Environmental resistance classification: IP, IK, temperature.
    Environmental sensor
    Environmental sensor (light, temperature, humidity) for LED control.
    Environmental test
    Environmental resistance test (temperature, humidity, salt spray) on LED products.
    Epistar chip
    LED chip from Taiwanese manufacturer Epistar; wide range of packages.
    Epitaxial growth
    Epitaxial growth of semiconductor crystal for LED chip production.
    Epitaxy
    Crystalline growth process of semiconductors used to produce LED chips.
    Epoch timer
    Long-term programmable timer for cyclic control of LED lighting.
    Epoxy (resin)
    Thermosetting resin for encapsulation and sealing of LED components.
    EPROM
    Programmable memory in LED controller for scenes and configurations.
    Equal energy spectrum
    Spectrum with equal energy at every wavelength; theoretical reference.
    Equal spacing
    Equidistant layout of LED fixtures for uniform illuminance.
    Equalization
    Final adjustment of brightness or color between different strip segments for uniformity.
    Equalization filter
    Filter equalizing brightness differences along LED strips of different wavelengths.
    Equi-flux surface
    Surface on which LED luminous flux is uniform.
    Equipment grounding
    Grounding of LED equipment for electrical protection.
    Equipment room lighting
    LED lighting for technical rooms and equipment rooms.
    Equivalent circuit
    Equivalent electrical circuit of the LED for modeling and simulation.
    Equivalent wattage
    Equivalent wattage of conventional light sources for comparison with LEDs.
    Ergonomic design
    LED lighting design for user comfort and health.
    Ergonomic lighting
    LED lighting designed to reduce visual and physical fatigue.
    ERP (ErP – Energy Related Products)
    European directive setting energy efficiency requirements for energy-related products.
    Error code
    Error code displayed by controller or LED driver for diagnostics.
    Error detection
    Automatic detection of faults in the LED system (open circuit, short circuit).
    Error margin
    Measurement error margin in LED photometric and colorimetric measurements.
    Escalator lighting
    LED lighting for escalators and moving walkways.
    Escape lighting
    Emergency LED lighting indicating escape routes.
    Escape route lighting
    LED lighting of evacuation routes in case of emergency.
    ESD protection (on the chip)
    Integrated electrostatic discharge protection in the package.
    ESP32 (controller)
    Wi-Fi/Bluetooth microcontroller for LED control.
    Ethernet
    Wired network protocol used for DMX data transport (Art-Net, sACN) in complex LED installations.
    Ethernet backbone
    Main Ethernet wiring for Art-Net/sACN signal transport.
    Ethernet controller
    Ethernet-connected LED controller for remote management.
    Ethernet gateway
    Gateway converting LED protocols (DALI, DMX) to Ethernet.
    Ethernet node
    Ethernet-connected LED device for control and monitoring.
    Ethernet switch managed
    Managed switch for prioritized LED signal distribution.
    Ethylene glycol
    Antifreeze fluid used in cooling systems for very-high-power LEDs.
    ETS (KNX)
    Engineering Tool Software for programming KNX-LED systems.
    ETSI
    European Telecommunications Standards Institute; defines standards for Zigbee and Bluetooth used in lighting.
    EU Ecolabel
    European ecological label for LED products with low environmental impact.
    EU regulation 2019/2020
    European regulation on efficiency requirements for LED light sources.
    Eulumdat (file)
    European photometric file format (.ldt) for lighting calculation software.
    European Article Number (EAN)
    Barcode for unique identification of LED products.
    European dimming standard
    European LED dimming standard: DALI IEC 62386.
    European safety mark
    European safety mark (CE, ENEC) for LED products.
    EVA (Ethylene Vinyl Acetate)
    Material for transparent encapsulation of LED strips.
    Evaluation board
    Evaluation board for testing LED chips and drivers before production.
    Evaluation kit
    Evaluation kit with LED strip and accessory samples for testing.
    Evanescent wave
    Evanescent wave in total internal reflection; basis of LED light guides.
    Evaporative cooling
    Evaporative cooling in special LED systems.
    Evaporative cooling system
    Evaporative cooling system for very-high-power LEDs.
    Even illumination
    Uniform illuminance across the entire LED target surface.
    Evenly spaced
    LEDs evenly spaced on the strip for homogeneous lighting.
    Event lighting
    Temporary LED lighting for events, trade shows, and exhibitions.
    Eveready
    Power supply with integrated emergency circuit maintaining LED lighting during blackouts.
    Everlight chip
    LED chip from Everlight Electronics for professional strips.
    Evolution of LED technology
    Technological advancements in LED efficiency and functionality.
    Example calculation
    Case study of LED lighting calculation as reference.
    Example installation
    Photo or diagram of a realized LED system as reference.
    Excavation LED light
    Portable LED lighting for excavation works and construction sites.
    Excess heat
    Excess heat generated by LEDs to be dissipated via profile and ventilation.
    Excitation wavelength
    Wavelength exciting the phosphor in the LED; typically 450 nm (blue).
    Excited state
    Energy state of the electron in the LED before photon emission.
    Exhaust fan integration
    Integration of LED lighting with extractor fans in bathrooms and kitchens.
    Exhaust LED
    LED fixture combined with air extractor for bathrooms and kitchens.
    Exhaust LED fan
    Extraction fan with integrated LED light for bathrooms and kitchens.
    Exhibition lighting
    LED lighting for exhibitions and displays; high CRI and UV protection.
    Existing installation
    Existing system to be upgraded with LED technology.
    Exit light
    LED fixture with signage for emergency exits.
    Exit path lighting
    LED lighting of the evacuation path in case of emergency.
    Exit sign
    LED-illuminated exit sign for emergencies.
    Expandable system
    Modular LED system expandable with additional components.
    Expansion bolt
    Expansion anchor for mounting LED profiles on masonry.
    Expansion coefficient
    Thermal expansion coefficient of LED profile materials.
    Expansion joint
    Expansion joint between adjacent LED profiles to accommodate thermal expansion.
    Expansion module
    Additional module to expand LED controller functionality.
    Expected life
    Expected LED component lifetime in operating hours.
    Exploded view
    Exploded view of an LED profile showing all separate components.
    Explosion-proof enclosure
    ATEX-certified enclosure for LED power supplies in hazardous areas.
    Explosion-proof LED
    LED fixture certified for use in potentially explosive atmospheres (ATEX).
    Exponential dimming
    Exponential dimming curves for very smooth transitions.
    Export packaging
    Reinforced packaging for international shipping of LED products.
    Export regulations
    Export regulations for LED products to different international markets.
    Exposed beam LED
    LED strip mounted on exposed surface-mounted beams for decorative lighting.
    Exposed brick LED
    Grazing LED lighting on exposed brickwork to highlight texture.
    Exposed wiring
    Surface-mounted wiring; industrial style for decorative LED installations.
    Exposure limit
    Exposure limit to LED light for photobiological safety.
    Extended gamut
    Extended color gamut achieved with RGBA or multichannel LEDs.
    Extended gamut LED
    LED with extended color gamut thanks to special phosphors or multichannel design.
    Extended warranty
    Warranty extended beyond the standard period offered by the LED manufacturer.
    Extension bracket
    Extension bracket to space the LED profile away from the surface.
    Extension cable
    Extension cable with pre-installed connectors.
    Extension cord
    Electrical extension cord to connect distant LED power supplies to outlets.
    Extension profile
    Additional LED profile section to reach the required length.
    Exterior application
    LEDs for outdoor spaces: gardens, facades, pathways, pools.
    Exterior cove
    Outdoor cove for LED strips protected from weather.
    Exterior downlight
    IP-rated outdoor LED downlight certified for exterior use.
    Exterior emergency
    Emergency LED lighting for outdoor areas.
    Exterior grade
    LED component rated for outdoor use.
    Exterior IP65 strip
    LED strip with IP65 protection for covered outdoor installations.
    Exterior IP67 strip
    LED strip with IP67 protection for exposed outdoor installations.
    Exterior profile
    LED profile designed for outdoor installation with weather protection.
    Exterior recessed LED
    Recessed LED fixture for outdoor floors and walls.
    Exterior wall LED
    Wall-mounted LED fixture for outdoor facade lighting.
    External antenna
    External antenna to improve wireless LED controller range.
    External ballast
    External ballast; in LED systems replaced by external driver.
    External control input
    Input for external control signals on the LED driver.
    External dimming signal
    Dimming signal from an external device to the LED driver.
    External driver
    Power supply separate from the fixture.
    External fuse
    External fuse for additional LED circuit protection.
    External heat sink
    Additional external heat sink for LEDs in critical thermal conditions.
    External power supply
    Power supply separate from the LED fixture.
    External sensor
    Sensor mounted externally to the LED fixture.
    External trigger
    Input for activation from an external sensor.
    Externally dimmable
    LED driver dimmable via external signal (0–10V, DALI, PWM).
    Extra flat profile
    LED profile with extremely low height for minimalist installations.
    Extra long strip
    LED strip in rolls longer than the standard 10 m; for extensive installations.
    Extra low profile
    LED profile with thickness less than 7 mm.
    Extra-low voltage (ELV)
    Extra-low voltage; LED strips operate in ELV mode.
    Extra warm white (2200K)
    Very warm CCT; candlelight-type ambiance.
    Extraction efficiency
    Efficiency of photon extraction from the LED chip to the outside.
    Extreme cold LED
    LED strip designed for operation below –30°C.
    Extreme heat LED
    LED strip designed for operation above 60°C.
    Extreme temperature LED
    Strip for extreme conditions (–40°C to +80°C).
    Extruded acrylic
    Extruded PMMA; more economical than cast, used for standard LED diffusers.
    Extrusion
    Production process forming aluminum profiles by pushing material through a die.
    Extrusion custom
    Aluminum profile with custom cross-section designed for specific project needs.
    Extrusion die
    Die through which molten aluminum is pushed to form the LED profile.
    Extrusion length
    Standard length of extruded bar before cutting to size.
    Extrusion tolerance
    Dimensional tolerance of extruded LED profile; typically ±0.1 mm.
    Eye bolt
    Eye bolt for suspending heavy LED profiles from the ceiling.
    Eye comfort
    Absence of glare, flicker, and annoying shades.
    Eye safety
    Ocular safety according to EN 62471.
    Eye-level lighting
    LED lighting positioned at eye height; for mirrors and displays. ↑ Back to top

    F

    Fabric diffuser
    Diffuser made of technical fabric for LED profiles with a soft and decorative effect.
    Fabrication drawing
    Manufacturing drawing of the LED profile with production specifications.
    Fabrication tolerance
    Manufacturing tolerance of the LED profiles in extruded aluminum.
    Facade (lighting of)
    LED lighting of building facades for nighttime architectural enhancement.
    Facade continuous LED
    LED lighting integrated into continuous glass and aluminum facades.
    Facade illuminata LED
    Building facade enhanced with nighttime LED lighting.
    Facade lighting
    LED lighting of building facades.
    Facade media LED
    Facade with integrated LED display for multimedia content.
    Facade ventilata LED
    LED strip behind the ventilated facade for a nighttime halo effect.
    Face mount
    Front mounting of the LED profile on the surface with surface-mounted screws.
    Face plate
    Front plate of wall-mounted dimmer or controller.
    Faceted reflector
    Faceted reflector for controlled and uniform light distribution.
    Factor K (magnetotermico)
    Factor for sizing the thermal-magnetic circuit breaker with LED power supplies.
    Factor of aging LED
    Reduction of luminous flux over time; considered in the maintenance factor (MF).
    Factor of correzione of the flux
    Coefficient that accounts for losses in the LED fixture.
    Factor of correzione temperature
    Coefficient that accounts for ambient temperature in LED calculations.
    Factor of declassamento
    Reduction of LED power supply output at elevated temperatures.
    Factor of flux direct
    Percentage of LED flux that directly reaches the work surface.
    Factor of forma spectral
    Description of the shape of the LED emission spectrum.
    Factor of load
    Ratio between the actual LED load and the nominal power supply rating.
    Factor of maintenance
    Coefficient that accounts for the reduction of luminous flux over time for lighting calculations.
    Factor of maintenance overall
    Product of the LED aging, dirt accumulation, and survival factors.
    Factor of maintenance LED
    MF value used in calculations to compensate for LED degradation over time.
    Factor of reduction flux
    Coefficient that accounts for optical losses in the LED system.
    Factor of reflection
    Percentage of light reflected from a surface; essential for indirect lighting calculations.
    Factor of safety power supply
    Extra power margin of the LED power supply; typically 20-30%.
    Factor of sopravvivenza
    Percentage of LEDs still functioning at the end of useful lifetime.
    Factor of sporcamento diffuser
    Reduction of flux due to dust accumulation on the LED diffuser.
    Factor of utilizzazione
    Ratio between useful luminous flux and total flux emitted by the fixture.
    Factor thermal LED
    Thermal considerations in the choice of LED profile for heat dissipation.
    Factory default
    Factory settings of the LED controller; restorable after customization.
    Factory reset
    Reset to factory settings of the LED controller.
    Fade rate
    Speed of brightness or color transition during LED dimming.
    Fade time
    Transition time in LED dimming; programmable in the controller.
    Fade-out
    Gradual switching off of the LED; soft transition from on to off.
    Fade-to-black
    Gradual transition from brightness to complete LED shutdown.
    Fail-open
    Failure mode in which the LED remains on; for safety lighting.
    Fail-safe
    Function that maintains LED operation in case of controller failure.
    Falegname (collaborazione)
    Coordination with the carpenter for milling housings for LED profiles.
    False ceiling (lighting to)
    Installation of LED profiles in suspended ceilings to achieve diffused, recessed or indirect lighting.
    False ceiling Armstrong
    Modular suspended ceiling system compatible with panels and LED profiles.
    False ceiling in doghe
    Batten-type suspended ceiling with possibility of LED profile integration.
    False ceiling in network
    Open-grid suspended ceiling with integrated LED fixtures.
    False ceiling REI
    Fire-rated suspended ceiling; LED profiles must comply with the fire classification.
    False ceiling slot
    Slot in the suspended ceiling for inserting recessed LED profiles.
    False ceiling to doghe LED
    Batten-type suspended ceiling with integrated LED profiles.
    False ceiling to quadrotti LED
    Modular panel suspended ceiling with LED integration.
    False start
    Momentary involuntary LED switching on; caused by interference on the dimmer.
    Falso quadro LED
    LED panel that simulates a window with natural daylight.
    Fan coil and LED
    Coordination between fan coil units and LED lighting in the building system.
    Fan coil integration
    Integration of LED lighting with fan coil air conditioning systems.
    Fan-out (wiring)
    Cable distribution from a central point to multiple strips.
    FAQ LED products
    Frequently asked questions about LED products with technical answers.
    Far field
    Far field of LED light distribution; where the beam is stable.
    Farad rating
    Capacitance in Farads of the capacitors in the LED power supply.
    Faretti adjustable LED
    Adjustable LED spotlights on track or articulated arms for accent lighting.
    Faretto from outdoor LED
    LED spotlight with IP protection rating for outdoor lighting.
    Faretto adjustable recessed
    Recessed LED spotlight with adjustable beam orientation.
    Faretto recessed LED
    LED spotlight for installation in suspended ceilings; downlight.
    Farmacia LED
    LED lighting for pharmacies; high CRI and regulatory compliance.
    Fascetta for cables LED
    Nylon cable tie for orderly bundling of LED cables.
    Fascetta inox
    Stainless steel cable tie for securing LED cables in aggressive environments.
    Fascetta nylon
    Nylon cable tie for bundling LED cables.
    Fascia luminous
    Horizontal architectural element with integrated LED strip.
    Fashion lighting
    LED lighting for fashion stores; high CRI and dynamic CCT to enhance fabrics.
    Fast blow fuse
    Fast-blow fuse for overcurrent protection in LED circuits.
    Fastener
    Generic mounting hardware for LED profiles.
    Faston
    Blade connector for quick connections in power supplies and industrial LED systems.
    Fat beam
    Wide and powerful LED beam for illuminating large areas.
    Fatigue crack
    Fatigue crack in LED profile from repeated thermal stress; prevented with adequate design.
    Feasibility of the project LED
    Assessment of the technical and economic feasibility of the LED system.
    Fattura proforma LED
    Preliminary commercial document for ordering LED products.
    Fatturazione energy LED
    Energy consumption metering of the LED system.
    Fault detection
    Automatic fault detection in the LED system with signaling.
    Fault indicator
    Indicator that signals a fault in the LED system.
    Fault log
    Log of faults stored by the LED controller for maintenance analysis.
    Fault tolerance
    Capacity of the LED system to continue operating with failed components.
    FCC (certification)
    American certification of electromagnetic compatibility for electronic devices including LEDs.
    Feathered beam
    LED beam with feathered edges for soft transition between lit and dark areas.
    Feathering
    Gradual fading of LED light at the beam edges.
    Feature lighting
    LED lighting that highlights a specific architectural element.
    Feed-in (point of power supply)
    Point where the cable connects to the LED strip.
    Feedback control
    Feedback control based on light sensor to maintain target LED light level.
    Feedback loop
    Feedback circuit in the LED driver to stabilize current and voltage.
    Feedback of the customer LED
    Customer feedback on the installed LED system.
    Ferramenta for LED profiles
    Metal hardware for mounting LED profiles: screws, clips, anchors.
    Festone LED
    Decorative LED string lights for events and holidays.
    FET (transistor)
    Component in the LED driver and trailing-edge dimmer.
    Fiber bundle
    Bundle of optical fibers illuminated by an LED source for decorative effects.
    Fiber optic illuminator
    LED source coupled to a bundle of optical fibers.
    Fiber optics
    Transparent filament that transports light; used as an alternative to LEDs for decorative point lighting.
    Fiber optics end-glow
    Fiber that emits light at the end; for starry ceiling effects.
    Fiber optics for cielo stellato
    Bundle of optical fibers illuminated by an LED source for starry effects.
    Fiber optics PMMA
    PMMA fiber optics for decorative LED lighting.
    Fiber optics side-glow
    Fiber that emits light along its length; for decorative luminous lines.
    Fiche technique LED
    Concise LED product datasheet with key parameters.
    Fidelizzazione of the customer LED
    Strategies for maintaining customer satisfaction with LED products over time.
    Field adjustable
    LED driver parameter adjustable on-site after installation.
    Field adjustable driver
    LED driver with output current adjustable on-site via selector.
    Field angle
    Beam angle measured at 10% of peak intensity; wider than the beam angle.
    Field installation
    Installation of the LED system at the site or final location.
    Field programmable
    LED controller programmable directly on-site via interface.
    Field replaceable
    LED component replaceable on-site without special tools.
    Field wiring
    On-site wiring to connect LED system components.
    Filament LED
    LED technology that mimics the appearance of traditional filament lamps; not related to LED strips.
    Filament LED strip
    LED strip that mimics the aesthetic appearance of filament lamps.
    Filament style LED
    LED lamp that mimics the aesthetics of incandescent filaments.
    File BIM LED profile
    3D BIM object of the LED profile for integration in Revit or ArchiCAD.
    File CAD LED profile
    2D/3D drawing of the LED profile for design purposes.
    File DWG LED profile
    AutoCAD file of the LED profile for architectural design.
    File IES for LED strip
    IES photometric file of the light distribution of the LED strip within the profile.
    File IES LED fixture
    IES photometric file of the LED fixture for simulation in DIALux.
    File LDT for LED profile
    Eulumdat photometric file of the LED profile's light distribution.
    File LDT LED fixture
    Eulumdat photometric file of the LED fixture for simulation.
    File STEP LED profile
    3D model of the LED profile in STEP format for CAD.
    Filettatura M3
    M3 metric thread for screws used to fix LED clips.
    Filettatura M4
    M4 metric thread for screws used to fix LED brackets.
    Fill factor
    Ratio of luminous area to total area; very high in COB LEDs.
    Film anti-condensa
    Film applied to the LED diffuser to prevent fogging.
    Film anti-graffio
    Protective film on the LED diffuser against scratches and abrasions.
    Film anti-riflesso
    Film that reduces reflections on the LED diffuser.
    Film LED
    Ultra-thin film with integrated micro-LEDs for flexible luminous surfaces.
    Film of diffusione
    Optical film applied to the diffuser to improve light uniformity without excessive loss.
    Film of protection
    Removable protective film applied at the factory on the LED profile.
    Film optical of diffusione
    Film that improves the uniformity of LED light through the diffuser.
    Film protettiva profile
    Removable film applied at the factory to protect the LED profile during transport.
    Film resistor
    Thin-film resistor on the LED strip for current limiting.
    Film retroriflettente
    Film that reflects LED light back toward the source; for optical efficiency.
    Filter anti-armoniche
    Filter that reduces harmonics generated by the LED driver on the mains network.
    Filter anti-insetti
    Shielding with amber LED spectrum that does not attract insects.
    Filter anti-UV
    Material in the diffuser that blocks ultraviolet components.
    Filter color interchangeable
    Interchangeable colored sheet placed in front of the LED source.
    Filter dicroico
    Optical filter that selectively reflects certain wavelengths.
    Filter EMI
    Filtering of electromagnetic interference at the power supply input.
    Filter holder
    Holder for colored filters placed in front of the LED source.
    Filter IR-cut
    Filter that blocks infrared components in the LED beam.
    Filter LC of output
    Inductor-capacitor (LC) filter on the LED driver output.
    Filter of color for LED
    Gel or colored sheet applied in front of the LED source.
    Filter of input
    EMI filter at the input of the LED power supply.
    Filter of network
    EMI filter at the input of the LED power supply for regulatory compliance.
    Filter of output
    Filter on the LED driver output side to reduce ripple.
    Filter optical dichroico
    Filter that selectively reflects certain wavelengths from the LED source.
    Filter passa-band LED
    Optical filter that transmits only a specific range of wavelengths from the LED.
    Filter passa-low
    Filter that allows only low frequencies to pass; for filtering LED PWM signals.
    Filter UV-cut
    Filter that blocks ultraviolet components in LED light.
    Fin (fin)
    Heat sink fin that increases the thermal exchange surface area.
    Final circuit
    Final electrical circuit that directly powers the LED fixtures.
    Final inspection
    Final inspection of the LED product before shipment.
    Financing LED
    Financing options for LED lighting investments.
    Financing LED system
    Financing option for purchasing the LED system.
    Fine pitch LED
    LED display with very fine pixel pitch for high resolution.
    Fine tuning
    Precision adjustment after installation.
    Finger joint
    Finger joint between LED profiles for non-standard angles.
    Finish (of the profile)
    Surface finish of the LED profile: natural anodized, black anodized, white painted, custom RAL.
    Finish aluminum raw
    LED profile without surface treatment; natural aluminum.
    Finish aluminum natural
    Surface of the LED profile without treatment; silver color.
    Finish anodized champagne
    Champagne-colored finish for LED profiles in elegant environments.
    Finish anodized copper
    Copper-colored finish for LED profiles in vintage and industrial styles.
    Finish anodized natural
    Treatment that preserves the silver color of aluminum with anti-corrosion protection.
    Finish anodized black
    Surface treatment of the aluminum profile with black oxidation; discreet aesthetics for dark environments.
    Finish anodized titanium
    Titanium-colored finish for LED profiles in modern environments.
    Finish anti-fingerprint
    Resistant to fingerprints on surface-mounted profiles.
    Finish black matte
    Matte black paint finish on the LED profile; elegant and discreet.
    Finish brass
    Gold/brass finish on profiles for classic and luxury environments.
    Finish brushed
    Surface treatment with linear texture; brushed steel effect.
    Finish chrome
    Glossy chrome finish on LED profiles for designer environments.
    Finish coordinata profile
    LED profile finish chosen to coordinate with surrounding furniture.
    Finish corten
    Decorative rust effect on LED profiles for industrial styles.
    Finish effect concrete
    Finish that simulates raw concrete on LED profiles for industrial style.
    Finish effect wood walnut
    Finish that simulates walnut wood on LED profiles.
    Finish effect wood oak
    Finish that simulates oak wood on LED profiles.
    Finish effect wood wenge
    Finish that simulates dark wenge wood on LED profiles.
    Finish gray anthracite
    Dark gray paint finish on the LED profile; for modern design.
    Finish lacquered glossy
    Mirror-glossy finish on LED profiles; lacquered effect.
    Finish lacquered matte
    Matte lacquered finish on LED profiles; elegant and discreet.
    Finish matt
    Matte finish; reduces reflections.
    Finish micro-sandblasted
    Finish with micro-sandblasting on LED profiles; delicate texture.
    Finish nickel brushed
    Brushed nickel finish on LED profiles.
    Finish of the diffuser
    Surface finish of the cover: opal, frosted, transparent, prismatic.
    Finish of the profile custom
    Painting of the LED profile in RAL color upon request.
    Finish of the profile to catalog
    Standard finishes available for the LED profile: natural, black, white.
    Finish on sample
    Painting of the LED profile in a specific color provided by the customer.
    Finish pewter
    Pewter-colored finish on LED profiles for classic environments.
    Finish RAL
    Painting of the profile in a specific RAL color for integration with furniture.
    Finish RAL 7016
    Anthracite gray; RAL finish highly requested for outdoor LED profiles.
    Finish RAL 9003
    Pure white; standard RAL finish for LED profiles coordinated with ceilings.
    Finish RAL 9005
    Matte black; RAL finish for LED profiles in designer environments.
    Finish RAL 9010
    Warm white; RAL finish for LED profiles in residential environments.
    Finish RAL 9016
    Traffic white; RAL finish for LED profiles in offices and commercial spaces.
    Finish to dust
    Thermosetting powder coating of the LED profile; durable and uniform.
    Finish to mirror
    Highly reflective surface of the LED profile.
    Finish white
    White powder coating of the profile; integrates with light surfaces and increases indoor reflectance.
    Finish white milk-white
    Matte white paint finish on the LED profile; coordinated with ceilings.
    Finishes available LED profile
    List of catalog finishes available for the LED profile.
    Fire barrier
    Fire barrier in ceiling penetrations for recessed LED profiles.
    Fire classification
    Fire classification of the profile and LED diffuser materials.
    Fire rated ceiling
    Fire-rated suspended ceiling into which LED profiles are integrated.
    Fire rated profile
    LED profile compliant with the fire safety requirements of the suspended ceiling.
    Fire rating
    Fire resistance classification of LED profiles and components.
    Fire resistance rating
    Duration of fire resistance of an LED profile under fire conditions.
    Fire retardant
    Flame-retardant material used in LED housings and diffusers.
    Fire stop
    Fire-resistant sealant for LED cable penetrations through walls and floors.
    Fire stopping
    Fire sealing of the recess hole for the LED profile in the suspended ceiling.
    Fire-rated
    Fire resistance classification for LED profiles and accessories installed in REI-rated suspended ceilings or walls.
    Fire-rated downlight
    LED downlight with integrated fire seal for suspended ceilings.
    Firmware
    Operating software of the LED controller.
    Firmware update
    Software update for the controller.
    First article inspection
    First article inspection to verify compliance with LED specifications.
    Fish eye lens
    Extreme wide-angle lens for ultra-wide LED light distribution.
    Fisheye lens
    Extreme wide-angle lens used in special LED fixtures.
    Fitting
    Mounting accessory for fixtures and LED profiles.
    Fitting corner profile
    Element that connects two LED profiles at an angle.
    Fitting ceiling-mounted
    Mounting system for anchoring the LED profile to the ceiling.
    Fitting curvo profile
    Curved element that connects two LED profiles in a curve.
    Fitting flexible
    Flexible element for connecting LED profiles on irregular surfaces.
    Fitting M10/M12
    Metric threading for mounting LED fixtures on brackets and supports.
    Fitting quick
    Mechanical connection system without screws for quick fixing of profiles, covers, or clips.
    Fitting to croce profile
    Element that connects four LED profiles in a cross configuration.
    Fitting to T profile
    Element that connects three LED profiles in a T-configuration.
    Fitting universal
    Mounting system compatible with different support types.
    Five-channel controller
    Five-channel controller for RGBCCT LED strips.
    Five-wire system
    Five-wire system for RGBW strips (common + R + G + B + W).
    Fixed beam
    LED beam with fixed, non-adjustable angle.
    Fixed bracket
    Fixed mounting bracket for LED profiles.
    Fixed CCT
    Strip with fixed, non-adjustable CCT.
    Fixed installation
    Permanent installation of the LED system; not temporary.
    Fixed output driver
    Power supply with fixed, non-adjustable output.
    Fixing adhesive strip
    Application of the LED strip to the surface using double-sided tape on the back.
    Fixing clip profile
    Mounting of the LED profile via clips screwed to the surface.
    Fixing insert
    Internal inserts in an LED profile for mechanical fixing of components.
    Fixing to glue profile
    Mounting of the LED profile with structural adhesive on the surface.
    Fixing to screw profile
    Mounting of the LED profile with screws through the mounting clip.
    Fixture
    International synonym for complete LED fixture.
    Fixture efficacy
    Efficacy of the entire fixture including losses.
    Fixture ID
    Unique identifier of the LED fixture in the management system.
    Fixture of lighting
    Complete assembly of LED source, driver, optics, enclosure, and mounting.
    Flagpole light
    LED lighting for flagpoles and flags.
    Flame effect LED
    Strip that simulates a flickering flame effect.
    Flame retardant cable
    Cable with flame-retardant sheath for fire safety.
    Flame spread index
    Flame spread index of the LED profile materials.
    Flange (flangia)
    Projecting edge for fixing or supporting the diffuser.
    Flange mounting
    Mounting via flange screwed to the surface.
    Flange nut
    Flanged nut for fixing LED fixtures with gasket.
    Flangia of bloccaggio
    Edge of the LED profile that locks the diffuser in the housing.
    Flangia of recess
    Edge of the LED profile that covers the edge of the recess hole.
    Flangia of support
    Edge of the LED profile that rests on the mounting surface.
    Flap (fin)
    Adjustable fin on LED fixtures for beam adjustment.
    Flash memory
    Non-volatile memory in the LED controller for storing scenes and configurations.
    Flashing (lampeggio)
    Effect with rapid on/off flashing.
    Flat beam
    Flat and wide LED beam; asymmetric distribution for wall-washing.
    Flat bottom profile
    LED profile with flat base for stable mounting on flat surfaces.
    Flat lens
    Flat lens for ultra-thin LED profiles.
    Flat panel LED
    Ultra-thin LED panel for ceiling-mounted lighting.
    Flat profile
    LED profile with minimized height; for ultra-thin installations.
    Flat terminal accessory
    Flat end cap for slim LED profiles.
    Flex circuit
    See FPCB. Flexible circuit for LED strip.
    Flex connector
    Flexible connector on small printed circuit for connecting LED strips in tight curves.
    Flex PCB
    Flexible printed circuit for LED strip.
    Flex track
    Flexible track for LED spotlights on curved paths.
    Flexibility (strip)
    Ability to bend and adapt to curves.
    Flexibility of installation
    Ability of the LED system to adapt to different mounting configurations.
    Flexibility of the strip
    Ability of the LED strip to bend to adapt to curved surfaces.
    Flexibility produttiva LED
    LED manufacturer's ability to adapt to customized requests.
    Flexible arm LED
    LED lamp with adjustable flexible arm for task lighting.
    Flexible circuit
    See FPCB. Flexible printed circuit for LED strip.
    Flexible conduit
    Corrugated tube for mechanical protection of LED cables.
    Flexible LED panel
    Flexible LED panel suitable for curved surfaces.
    Flexible neon
    See LED neon flex. Flexible tube that simulates neon.
    Flexible profile
    Flexible LED profile in silicone or aluminum for curves and arches.
    Flexographic printing
    Flexographic printing for applying markings and logos on LED strips.
    Flicker (sfarfallio)
    Rapid and repetitive variation in perceived brightness; caused by low-frequency PWM dimming or poor-quality drivers.
    Flicker Index
    Quantitative parameter of light flicker; lower values indicate better light stability.
    Flicker metric
    Standardized metric for quantifying LED flicker.
    Flicker percentage
    Peak-to-peak percentage variation in brightness.
    Flicker test
    Test measuring LED light flicker according to IEC standards.
    Flicker-free
    Characteristic of drivers and LED strips that operate without perceptible flicker; important for visual comfort and video recording.
    Flight case
    Protective flight case for transporting controllers and LED fixtures.
    Flip LED chip
    LED with die mounted face-down for better thermal dissipation.
    Flip-chip LED
    LED die mounted upside-down on the substrate for improved heat dissipation.
    Float glass
    Float glass used for high-quality LED diffusers.
    Floating effect
    Visual floating effect created by LED strips hidden behind furniture or panels.
    Floating mount
    Mounting system that creates a suspended effect for the LED profile.
    Floating shelf light
    LED lighting integrated into shelves that appear to float in space.
    Flood (inondazione luminous)
    Wide and uniform light distribution; typical of LED strips with emission angle ≥120°.
    Flood beam
    Wide and uniform beam for illuminating large areas.
    Floodlight LED
    Floodlight with wide beam for outdoor areas.
    Floor channel
    Floor channel for housing cables and LED strips.
    Floor guide light
    Floor-mounted LED light for guiding paths in dark environments.
    Floor lighting
    LED lighting integrated into the floor via walkable profiles for pathways or scenic effects.
    Floor marker LED
    Recessed LED floor marker for pathway indication.
    Floor recessed LED
    Floor-recessed fixture; walkable.
    Floor standing lamp LED
    Floor-standing lamp with LED source.
    Floor standing LED
    Floor-standing LED fixture, torchiere type.
    Floor wash effect
    Effect of LED light spreading onto the floor from the edge of a wall-mounted fixture.
    Floor washer
    LED fixture that illuminates the floor with grazing light.
    Flow rate
    Flow rate of cooling fluid in liquid-cooled LED systems (rare, high power).
    Fluorescence
    Emission from material stimulated by UV LEDs.
    Fluorescent replacement
    Replacement of fluorescent tubes with LEDs.
    Fluorescent retrofit
    Retrofitting of fluorescent ceiling fixtures to LED lighting.
    Fluoropolymer
    Fluoropolymer with high chemical and thermal resistance for special LED cables.
    Fluoropoly polymer cable
    Cable with fluoropolymer insulation for high chemical and thermal resistance.
    Flush box
    Recessed box for housing compact LED power supplies.
    Flush cut
    Flush cutting of the LED profile surface for a perfect finish.
    Flush diffuser
    Diffuser flush with the profile surface; no protrusions.
    Flush mount
    Flush mounting; profile that does not protrude.
    Flush trim
    Edge of the LED profile flush with the surrounding surface.
    Flux bin
    Luminous flux category in LED chip binning.
    Flux bin code
    Code identifying the luminous flux category of the LED batch.
    Flux binning
    Classification of LED chips into homogeneous luminous flux groups during production.
    Flux density
    Luminous flux density per unit of LED emitting area.
    Flux efficace LED
    Actual LED luminous flux after optical and thermal losses in the system.
    Flux emisferico lower
    LED flux emitted in the lower hemisphere; useful for illuminance.
    Flux emisferico upper
    LED flux emitted in the upper hemisphere; should be minimized to reduce light pollution.
    Flux in output from the profile
    Effective lumens after diffuser loss; useful flux of the LED profile.
    Flux iniziale LED strip
    Luminous flux of the LED strip measured after the first 100 hours.
    Flux mantenuto LED strip
    Luminous flux of the LED strip at the end of useful lifetime (L70).
    Flux netto LED profile
    Luminous flux output from the LED profile after diffuser losses.
    Flux of the LED strip for metro
    Lumens emitted by the LED strip per linear meter; key parameter.
    Flux output ratio
    Ratio between flux emitted by the fixture and total LED flux.
    Flux radiante
    Total radiant power emitted by the LED; in Watts.
    Flux radiante spectral
    Radiant power per unit wavelength; for the LED spectrum.
    Flux specific for watt
    Luminous flux per Watt of absorbed power; LED efficacy.
    Flux stabilization
    Stabilization of LED luminous flux after the initial hours of operation.
    Fly lead
    Short pre-soldered cable on the strip for connection.
    Fly wire
    Short flying lead for quick connection of LED components.
    Flyback converter
    Converter topology used in isolated low-power LED drivers.
    Foam mounting pad
    Foam pad for cushioned mounting of LED strips.
    Foam tape
    Double-sided foam tape for irregular surfaces.
    Focal plane
    Plane on which the LED beam converges through a lens.
    Focal point
    Focal point of an LED lens where light rays converge.
    Fog machine LED
    Smoke machine with integrated LED light for scenic effects.
    Fog resistant
    LED fixture resistant to fog; for outdoor lighting.
    Foglio tecnico LED strip
    Concise document with the main parameters of the LED strip.
    Foldback protection
    Current reduction when the driver exceeds the temperature limit.
    Folded optic
    LED optics with folded light path for compact fixtures.
    Follow spot LED
    LED follow spot for stage lighting.
    Font lighting
    LED lighting for baptismal fonts; IP68 required.
    Fonte luminous LED
    Any source that uses LED technology to emit light.
    Food display lighting
    LED lighting specifically for food displays with optimized spectrum.
    Food lighting application
    LEDs calibrated to enhance the appearance of food in display cases and counters.
    Food retail lighting
    LEDs for supermarkets with spectrum optimized for meat, fish, and fruit.
    Food safe (material)
    Approved for indirect contact with food.
    Foot pedal dimmer
    Foot pedal dimmer for hands-free control of LED brightness.
    Foot-lambert
    Anglo-Saxon unit of luminance; 1 fL = 3.426 cd/m².
    Footcandle (fc)
    Anglo-Saxon unit of illuminance; 1 fc = 10.764 lux.
    Footprint luminous
    Area illuminated by the LED beam on a target surface.
    Forbici from elettricista
    Electrician's scissors with insulated blades for cutting cables and LED strips.
    Force curing
    Accelerated curing of adhesives and sealants with UV LEDs.
    Forced air cooling
    Forced-air cooling with fan for very-high-power LEDs.
    Forced ventilation
    Forced ventilation for cooling very-high-power LEDs.
    Form factor
    Dimensions and form factor of the LED package or power supply.
    Forma of the beam LED
    Geometry of the luminous cone emitted by the LED fixture.
    Forma of the section profile
    Geometry of the LED profile's cross-section: U, V, rectangular, circular.
    Format of confezionamento strip
    Presentation of the LED strip: reels of 5m, 10m, 20m, or cut to measure.
    Format of the reel strip
    Length of LED strip per reel: 5 m, 10 m, 20 m standard.
    Forward current (If)
    Direct current flowing through the LED; operating parameter.
    Forward voltage (Vf)
    Voltage drop across the LED; typically 2.8-3.5V.
    Foto of referenza LED
    Images of completed LED installations for portfolio purposes.
    Foto of the installation LED
    Photographic documentation of the completed LED system.
    Fotocellula LED
    Light sensor for twilight control of LED lighting.
    Fotodiodo
    Light-sensitive diode used in sensors for LED control.
    Fotone
    Elementary particle of light emitted from the LED chip during recombination.
    Fotoresistenza (LDR)
    Sensor whose resistance varies with light; for LED control.
    Fotovoltaico for LED
    Solar panel that powers an autonomous off-grid LED system.
    Foundation bolt
    Foundation bolt for securing LED lighting poles.
    Fountain luminous LED
    Fountain with underwater LED lighting for chromatic effects.
    Four-channel controller
    Four-channel LED controller with independent channels; typical for RGBW.
    Four-wire system
    Four-wire system for RGB strips: one common and three color channels.
    Foyer LED
    LED lighting for theater and hotel lobbies.
    FPCB (Flexible Printed Circuit Board)
    Flexible printed circuit in copper/polyimide that forms the support for flexible LED strips.
    FPCB double copper
    Strip with double-layer copper PCB; lower resistance and better heat dissipation.
    FPCB single copper
    Strip with single-layer PCB; standard for economical strips.
    FR4 (substrato)
    Epoxy glass fiber substrate for rigid PCBs of LED controllers.
    Frame (telaio)
    Support structure for large-dimension LED panels.
    Frame rate
    Update frequency of the addressable LED controller; in fps.
    Framing projector
    LED projector with framing shutters to define the beam contour.
    Freccia of inflessione
    Maximum deflection of a long LED profile suspended between two supports.
    Free air rating
    Current carrying capacity of LED cable in free air.
    Free standing profile
    Self-supporting LED profile that does not require a mounting surface.
    Free-form optic
    Optics with shaped surfaces for customized light distributions.
    Freestanding LED
    Freestanding LED fixture that does not require wall or ceiling mounting.
    French cleat
    French cleat mounting system for heavy LED profiles.
    Frequency (light)
    Frequency of the LED light wave; related to wavelength.
    Frequency band
    Frequency band of the wireless signal for LED control.
    Frequency hopping
    Frequency hopping in wireless LED protocols to avoid interference.
    Frequency modulation
    Frequency modulation of the signal for LED control.
    Frequency of cutting
    Cutoff frequency of the filter that separates the useful signal from noise in the LED driver.
    Frequency of lampeggio
    Number of flashes per second of a signaling LED.
    Frequency of maintenance LED
    Interval between scheduled maintenance interventions for the LED system.
    Frequency of network 50 Hz
    Frequency of the European electrical grid; the LED power supply converts it to DC.
    Frequency of network 60 Hz
    Frequency of the American electrical grid; compatible with universal LED power supplies.
    Frequency of switching
    Switching frequency of the LED driver; typically 50-500 kHz.
    Frequency of update
    Data refresh rate on addressable LED strips; in Hz.
    Frequency PWM
    Number of cycles per second of the PWM signal; frequencies ≥1 kHz avoid perceptible flicker.
    Fresa for LED profile
    Rotary tool for creating the recess housing for the LED profile.
    Fresa to tazza
    Cylindrical drill bit for drilling large diameters for LED downlights.
    Fresnel lens array
    Array of miniature Fresnel lenses for controlling the LED beam.
    Fresnel reflection
    Partial reflection of light at the interface between two materials with different refractive indices.
    Friction fit
    Insertion of the diffuser into the profile by friction fit; without clips or adhesive.
    Front emission
    Emission from the front face; standard configuration.
    Front glass
    Protective front glass in outdoor LED fixtures.
    Front loading
    Front-loading insertion of the strip and diffuser into the LED profile.
    Frontale luminous
    Front-lit panel with LED strip for signs and signage.
    Frost (effect ghiaccio)
    Diffuser finish that simulates frosted glass.
    Frost filter
    Diffusing filter applicable in front of the LED to soften the beam.
    Frosted glass
    Frosted glass for high-quality LED diffusers.
    Frosted lens
    Frosted lens that diffuses the LED beam.
    Frutto recessed for dimmer
    LED dimmer mechanism for mounting in standard wall boxes.
    FTP cable
    Shielded cable with aluminum foil for LED signals in electrically noisy environments.
    Full body induction sensor
    Sensor that detects full-body presence for LED activation.
    Full cutoff
    Fixture that emits no light above the horizontal plane; reduces light pollution.
    Full cutoff fixture
    LED fixture with no emission above the horizontal plane.
    Full HD LED display
    LED display with 1920x1080 pixel resolution.
    Full moon effect
    LED lighting effect that simulates full moonlight; CCT 4100K and low intensity.
    Full range dimming
    Full-range dimming 0-100% without dead zones.
    Full spectrum
    Full-spectrum LED covering all visible wavelengths for excellent color rendering (CRI ≥95).
    Full spectrum grow LED
    Full-spectrum LED optimized for all plant growth phases.
    Full spectrum LED strip
    LED strip with continuous spectrum similar to sunlight; CRI above 95.
    Full wave rectifier
    Full-wave rectifier in the LED power supply.
    Fully shielded
    Fully shielded LED fixture; no emission above the horizontal.
    Fume hood lighting
    LED lighting for fume hoods; resistant to corrosive vapors.
    Function block
    Functional block in an LED automation system.
    Functional lighting
    LED lighting for a specific visual task.
    Functional test
    Final functional test of the LED fixture before shipment.
    Functionality of the LED controller
    List of functions available in the LED controller.
    Furniture bathroom LED
    Bathroom furniture with integrated LED lighting for mirrors and drawers.
    Furniture complement
    Decorative object with integrated LED strip for ambient lighting.
    Furniture garden LED
    Outdoor furniture with integrated LED lighting.
    Furniture integration
    Integration of LED strips and profiles into furniture and furnishings.
    Furniture kitchen LED
    Kitchen furniture with under-cabinet and interior drawer LED lighting.
    Furniture LED
    LED lighting integrated into furniture and furnishings.
    Furniture luminous from indoor
    Indoor furniture accessory with integrated LED strip.
    Furniture luminous from outdoor
    Outdoor furniture accessory with integrated LED lighting.
    Furniture luminous LED
    Furniture item or accessory with integrated LED lighting.
    Furniture office LED
    Desks and office furniture with integrated task LED lighting.
    Furniture room LED
    Bedroom furniture with integrated LED lighting.
    Furniture sensor
    Sensor integrated into furniture for automatic LED lighting activation.
    Fuse
    Protective device that interrupts the circuit in case of overcurrent; present in power supplies and strips.
    Fuse box
    Fuse box where LED circuit protections are installed.
    Fuse holder
    Fuse holder in the LED protection circuit.
    Fuse of protection LED
    Fuse that protects the LED circuit from overcurrent.
    Fuse rating
    Nominal current rating of the LED circuit protection fuse.
    Fuse to reset automatic (PTC)
    Resets after cooling; reusable protection.
    Fusing current
    Tripping current of the fuse in the LED circuit. ↑ Back to top

    G

    G connector
    Connector specific for LED strip with fitting of type G.
    G-clamp
    G-shaped clamp for temporary mounting of LED fixtures onto structures.
    G4/G9/GU5.3/GU10 (bases/caps)
    Standardized bases/caps for LED retrofit lamps of various formats.
    Gable lighting
    LED lighting for the triangular gable end of a building.
    Gaffer tape
    Professional-grade adhesive tape for temporary LED mounting in stage and event applications.
    Gain (guadagno)
    Ratio between luminous intensity in a specific direction and average intensity; used for LED optics.
    Galleria of art LED
    LED lighting for art galleries; CRI >95 and UV protection.
    Gallery lighting
    LED lighting for art galleries; high CRI and UV protection.
    Galvanic cell
    Electrochemical cell within the battery of an emergency LED module.
    Galvanic corrosion prevention
    Insulation between dissimilar metals to prevent electrochemical corrosion.
    Galvanic isolation
    Electrical insulation between the input and output of an LED driver for safety.
    Galvanic isolation transformer
    Transformer that provides galvanic isolation between the LED output and the mains grid.
    Galvanic separation
    Galvanic separation between the mains circuit and the LED output in a driver.
    Galvanica (finish)
    Electrolytic metal deposition treatment applied to LED profiles for surface finishing.
    Galvanized steel bracket
    Zinc-coated steel bracket for outdoor mounting of LED profiles.
    Gamma accessories LED
    Complete set of accessories available to complement an LED system.
    Gamma adjustment
    Adjustment of gamma curves for natural LED dimming.
    Gamma colors LED strip
    Range of colors and CCT options available for LED strips in the catalog.
    Gamma complete LED
    Complete product range including LED strips, profiles, drivers, controllers, and accessories.
    Gamma correction
    Correction of brightness-to-signal curves to ensure linear perceived dimming.
    Gamma curves
    Curves that map the input signal to perceived brightness for natural dimming.
    Gamma diffusers LED
    Complete range of diffuser types available for LED profiles.
    Gamma LED connectors
    Full range of LED connector types available in the catalog.
    Gamma LED controller
    Complete series of LED controller models available in the catalog.
    Gamma LED power supplies
    Full range of LED power supply models available in the catalog.
    Gamma LED profiles
    Wide selection of LED profile models available in the catalog.
    Gamma LED strip
    Complete series of LED strip models available in the catalog.
    Gamma of LED products
    Complete portfolio of LED products offered by a manufacturer.
    Gamma of temperature color
    CCT range available for an LED strip: typically 2200K–6500K.
    Gamut (chromatic)
    Area of the CIE diagram covered by an LED system; RGB systems offer a wide gamut.
    Gamut mapping
    Conversion of a target color into a color reproducible by an RGB LED system.
    GaN (Nitruro of Gallio)
    Semiconductor material used to manufacture high-efficiency blue and white LED chips.
    Gancio of suspension LED
    Ceiling-mounted hook for suspending LED profiles using cables.
    Ganged dimmer
    Multi-channel dimmer housed in a single frame for LED control.
    Gantt chart (project LED)
    Timeline diagram used for planning LED installation projects.
    Gap energy
    Energy range between the valence and conduction bands in an LED semiconductor.
    Gap filler
    Thermally conductive material that fills gaps and irregularities between the LED strip and profile.
    Gap filling
    Filling of the space between an LED profile and the mounting surface for a clean finish.
    Garage application
    LED lighting for garages and parking structures; tri-proof fixtures and sensors.
    Garage ceiling LED
    LED lighting for garage and underground parking ceilings.
    Garage door sensor LED
    Garage door opening sensor that triggers LED lighting.
    Garage interrato LED
    LED lighting for underground garages; includes sensors and emergency lighting.
    Garden application
    LED lighting for gardens; minimum IP65 and landscape integration.
    Garden bollard LED
    LED luminous post for garden pathways; minimum IP65 rating.
    Garden bridge LED
    LED lighting for garden bridges and walkways.
    Garden contemporaneo LED
    LED lighting for contemporary gardens with clean, essential lines.
    Garden LED controller
    Outdoor-rated LED controller for managing garden lighting.
    Garden of inverno LED
    LED lighting for winter gardens and conservatories.
    Garden path LED
    LED lighting for garden paths and driveways.
    Garden pensile LED
    LED lighting for rooftop gardens and green terraces on buildings.
    Garden roccioso LED
    LED lighting for rock gardens using in-ground fixtures.
    Garden spike light
    LED spotlight with a ground spike for installation in garden soil.
    Garden spotlight
    Adjustable garden LED spotlight with a mounting spike.
    Garden to the italiana LED
    LED lighting for formal Italian-style gardens with geometric layouts and pathways.
    Garden wall light LED
    Outdoor LED wall sconce for illuminating walls and fences.
    Garden zen LED
    LED lighting for Zen gardens; provides a warm, discreet atmosphere.
    Gas discharge lamp
    Gas-discharge lamp largely replaced by LEDs for better efficiency and lifespan.
    Gas station LED
    LED lighting for fuel stations; high efficiency and uniform illumination.
    Gaseous environment
    Environment containing hazardous gases; requires ATEX-certified LED fixtures.
    Gasket (gasket)
    Silicone or EPDM seal for ensuring the IP rating of profiles and LED fixtures.
    Gasket compression
    Compression of the gasket to maintain the IP seal in LED profiles.
    Gasket material
    Material used for gaskets to ensure the IP seal of profiles and LED fixtures.
    Gasket replacement
    Replacement of sealing gaskets in LED profiles to maintain IP protection.
    Gate controller
    Circuit that drives the gate of a MOSFET transistor in an LED driver.
    Gate driver
    Circuit that controls the switching transistor in an LED driver.
    Gateway
    Interface device connecting different protocols (e.g., Wi-Fi ↔ Zigbee, KNX ↔ DALI) in smart LED systems.
    Gateway configuration
    Setup of a gateway to enable communication between different LED control protocols.
    Gateway firmware
    Internal firmware software of an LED communication gateway.
    Gathering light
    LED lighting designed for social and gathering areas.
    Gauge (calibro)
    Measurement of material thickness or LED cable cross-section.
    Gaussian distribution
    Gaussian distribution of luminous intensity typical of certain LED optics.
    Gazebo LED
    LED lighting for garden gazebos and pergolas.
    Gear tray
    Technical compartment in an LED fixture that houses the driver and wiring.
    Gel (filter colored)
    Colored filter sheet placed in front of an LED source to modify its color.
    Gel filter frame
    Frame designed to hold colored gel filters for stage LED fixtures.
    Gelatina colored
    Colored material sheet used to filter LED light in stage and theatrical applications.
    General illumination LED
    LED designed for general ambient lighting; not primarily decorative.
    General lighting
    Ambient LED lighting that provides the baseline illumination level in a space.
    General purpose driver
    Standard LED driver compatible with various types of strips and modules.
    General purpose LED
    LED intended for general applications; not specialized for a specific use.
    Generator backup
    Backup generator to power the LED system during prolonged blackouts.
    Generatore of color
    Device or software that generates custom colors for RGB LED strips.
    Generatore of effetti LED
    Controller that generates dynamic patterns and effects on LED strips.
    Generatore of signal DMX
    Device that generates the DMX512 control signal for LED systems.
    Gentle dimming
    Soft, gradual dimming for enhanced visual comfort with LED lighting.
    Geofencing
    Automatic activation of LED lighting based on the GPS location of a user's smartphone.
    Geofencing LED
    Automatic activation of LED lighting triggered by GPS location.
    Geometric fixture
    LED fixture featuring a decorative geometric shape.
    Geometric optic
    LED optics based on geometric refraction and reflection principles.
    Geometric optics
    Geometric optics applied to the design of LED lenses and reflectors.
    Geometric profile
    LED profile with a non-standard geometric cross-section for aesthetic effects.
    Geothermal cooling
    Geothermal cooling system for high-power underground LED installations.
    Geothermal LED
    LED system powered by geothermal energy for maximum sustainability.
    Gesso for drywall LED
    Joint compound/plaster used to finish the junction between an LED profile and drywall.
    Ghost current
    Stray leakage current that keeps LEDs faintly glowing when the dimmer is turned off.
    Ghost load
    Dummy load added to meet the minimum load requirement of an LED dimmer.
    Ghost power
    Residual power consumed by an LED circuit when it appears to be switched off.
    Ghosting
    Faint residual LED glow when the dimmer is at zero; a compatibility issue.
    GHz (Gigahertz)
    Wireless communication frequency (e.g., 2.4 GHz for Wi-Fi, Zigbee, Bluetooth).
    Gimbal (joint cardanico)
    Adjustable mount for LED spotlights allowing rotation on two axes.
    Gimbal downlight
    LED downlight with a gimbal mount for beam direction adjustment.
    Gimbal ring
    Gimbal ring enabling biaxial orientation of LED spotlights.
    Gioco of light
    Decorative effect created by the interplay of LED strip light and surrounding surfaces.
    Gioco of ombre LED
    Decorative shadow effect created by the distribution of LED light.
    Gioielleria LED
    LED lighting for jewelry stores; features very high CRI and precise CCT control.
    Giravite flat
    Flathead screwdriver for tightening LED power supply terminals.
    Giravite to stella
    Phillips head screwdriver for standard LED profile mounting screws.
    Glare
    Visual discomfort caused by excessive or poorly distributed luminance; mitigated in LED profiles using opal diffusers.
    Glare control
    Set of measures (optical design, positioning, shields) to reduce LED glare.
    Glare direct
    Glare caused by directly viewing the light source without shields or diffusers.
    Glare evaluation
    Assessment of glare using UGR calculations or direct measurements.
    Glare from riflesso
    Glare caused by reflection of LED light off glossy surfaces.
    Glare indirect
    Glare generated by light reflecting off glossy or highly reflective surfaces.
    Glare molesto (discomfort glare)
    Visual discomfort that does not necessarily impair vision; typical of poorly shielded LED profiles.
    Glare rating
    Numerical index indicating the glare level produced by an LED fixture.
    Glare shield
    Anti-glare screen or shield attached to LED profiles or spotlights.
    Glare velante (disability glare)
    Reduction in visual performance caused by scattered light in the eye; critical in work environments.
    Glass bead blasting
    Sandblasting using glass microbeads to achieve a frosted finish on LED profiles.
    Glass bead finish
    Frosted surface finish applied to LED profiles using glass microbeads.
    Glass borosilicato
    Heat-resistant borosilicate glass used for LED diffusers in high-temperature environments.
    Glass channel profile
    LED profile featuring a channel designed for inserting glass diffusers.
    Glass cover
    Glass cover for premium LED profiles and walkable applications.
    Glass diffuser
    Glass diffuser for premium LED profiles; offers higher transmittance and longevity.
    Glass diffuser panel
    Glass diffuser panel for high-end LED installations.
    Glass enclosure
    Glass housing for premium LED fixtures or harsh environments.
    Glass fiber cable
    Fiber optic cable for transmitting LED control signals over long distances.
    Glass fiber reinforced PCB
    Glass fiber-reinforced (FR4) PCB used for rigid LED bars.
    Glass float
    High-quality float glass used for premium LED diffusers.
    Glass for profile walkable
    Tempered or laminated glass used as a cover for floor-mounted LED profiles.
    Glass frosted
    Frosted glass material for premium diffuser applications; superior to polycarbonate.
    Glass laminate
    Laminated glass with integrated LED strips for architectural applications.
    Glass lens
    Glass lens for high-quality LED fixtures; more durable than plastic alternatives.
    Glass panel LED
    Glass panel backlit with LED strips.
    Glass shelf LED
    Glass shelf edge-lit with an LED strip.
    Glass soda-lime
    Standard soda-lime glass used for basic LED diffusers.
    Glass stratificato of safety
    Safety laminated glass with PVB interlayer for LED diffusers in public areas.
    Glass temperato
    Thermally treated safety glass; used in walkable profiles.
    Glass transition temperature
    Temperature at which a polymer (PMMA, PC) changes state; a key limit for LED diffusers.
    Glass wall LED
    Glass wall backlit with LED strips for decorative effects.
    Glazed surface
    Glazed or enamelled surface that reflects LED light.
    Glazing (vetrata illuminata)
    Integration of LED strips into glass windows and partitions.
    Glazing bar LED
    Window mullion or glazing bar with an integrated LED strip.
    Glazing bead
    Glazing bead used to secure a glass diffuser within an LED profile.
    Global dimming
    Simultaneous dimming of all LED fixtures within a system.
    Globe LED
    Globe-shaped LED lamp; not related to strips but common in decorative installations.
    Globe LED lamp
    Decorative spherical LED lamp; not related to LED strips.
    Globo LED
    Spherical LED fixture for decorative lighting.
    Gloss level
    Glossiness level of an LED profile's surface finish.
    Glow (bagliore)
    Soft, diffused light emitted by an LED at low intensity.
    GLOW protocol
    Proprietary wireless control protocol for smart LED systems.
    Glow wire compliance
    Compliance with the glow wire test for materials used in LED fixtures.
    Glow wire test
    Fire resistance test using a heated wire for profile and LED driver materials.
    Glow-in the-dark
    Phosphorescent material that glows in the dark after exposure to LED light.
    Glow-in the-dark strip
    Strip containing phosphorescent pigments that emit residual light after power-off.
    Glue channel
    Channel in an LED profile designed for applying sealing adhesive.
    Glue dot
    Small adhesive point used for temporary mounting of LED components.
    Glue gun
    Hot glue gun used for quick temporary mounting of LED components.
    Glue joint
    Adhesive joint connecting two sections of an LED profile.
    Glue stick
    Thermoplastic adhesive stick for hot glue guns; used for temporary LED fixing.
    Glue to warm (pistola)
    Hot melt adhesive gun for quick mounting of LED components.
    Glycol cooling
    Glycol-based cooling system for very high-power LED installations.
    GN (Group Norme)
    Regulatory committee that defines standards for LED lighting.
    Go/no-go test
    Pass/fail quality control test for LED strips during production.
    Gocciolamento (anti-)
    Feature of an LED profile that prevents condensation buildup and dripping.
    Gold coating
    Gold plating on LED contacts for maximum conductivity and corrosion resistance.
    Gold contact
    Gold-plated contact on LED connectors for optimal conductivity and reliability.
    Gold plated contact
    Gold-plated contact ensuring minimum resistance and maximum reliability in LED connections.
    Gold reflector
    Gold-coated reflector that enhances warm, inviting LED lighting in hospitality settings.
    Gold wire bonding
    Connection of the LED die to terminals using ultra-thin gold wire.
    Golf course LED
    LED lighting for golf courses and driving ranges.
    Gondola LED
    LED lighting for retail display gondolas in supermarkets.
    Goniofotometro to mirror rotante
    Laboratory instrument with a rotating mirror used to measure LED light distribution.
    Goniometer measurement
    Goniometric measurement of an LED fixture's light distribution.
    Goniometric data
    Light distribution data measured with a goniophotometer for an LED fixture.
    Goniophotometer
    Laboratory instrument that measures the complete spatial light distribution of a fixture.
    Good color rendering
    CRI ≥ 80; sufficient for general lighting applications.
    Good practice guide
    Guide to best practices for installing LED systems.
    Google Assistant compatible
    LED controller compatible with Google Assistant voice commands.
    Google Home / Google Assistant
    Google smart home platform for voice-controlled LED lighting.
    Gooseneck LED
    LED lamp with an adjustable flexible neck for task lighting.
    Gothic arch LED
    LED profile shaped like a Gothic arch for architectural installations.
    Gouge (milling to V)
    V-groove milled into wood to insert corner LED profiles.
    Government specification
    Government technical specification for LED lighting in public buildings.
    GPS timing
    GPS-based time synchronization for large-scale LED installations.
    Graceful degradation
    Gradual reduction in LED performance rather than sudden failure.
    Gradazione (grazing)
    Grazing lighting technique applied to a surface to highlight its texture.
    Grade (quality)
    Quality tier of an LED component: commercial, professional, or premium.
    Graded index lens
    Lens with a variable refractive index for optimized LED beam shaping.
    Gradi Kelvin LED
    Color temperature of LED light expressed in Kelvin.
    Gradi of protection IP LED
    Classification system for the environmental protection rating of LED fixtures.
    Gradient effect LED
    Gradual color or intensity fading effect on an LED strip.
    Gradient lighting
    Lighting featuring a gradual variation of color or intensity along a path.
    Gradient temperature
    Temperature gradient along an LED profile; should be minimized.
    Grading (selezionamento)
    Sorting of LED components into quality grades.
    Grading system
    Qualitative classification system for LED products.
    Grafene (conductor thermal)
    Material with excellent thermal conductivity; currently being tested for LED PCBs.
    Grafene (heat sink)
    Graphene sheet used for advanced thermal dissipation in LED strips.
    Grafene (substrato in)
    Carbon-based material with excellent thermal conductivity; under testing for high-power LED PCBs.
    Grain (grana)
    Fine visible texture on a diffuser surface; influences aesthetics.
    Grain size
    Size of phosphor particles in an LED; affects uniformity and efficiency.
    Grain structure
    Granular structure of diffuser material that influences light diffusion.
    Grana of the diffuser
    Surface texture/grain of an LED diffuser affecting optical quality.
    Graphic display LED
    LED display for showing text and graphics.
    Graphic equalizer (LED)
    LED bar visualizer that displays audio frequencies.
    Graphic overlay
    Printed graphic panel applied over a push-button LED controller.
    Graphite pad
    Ultra-thin graphite thermal pad placed beneath an LED strip.
    Graphite thermal pad
    Thermally conductive graphite pad for high-performance LED heat dissipation.
    Grass area LED
    LED lighting for grassy areas and lawns in parks and gardens.
    Grasso thermal
    Thermally conductive paste used for strip-to-profile thermal contact.
    Grate ceiling LED
    LED lighting for open-grid suspended ceilings.
    Grattacielo LED
    LED lighting for skyscrapers: facade, interior, and emergency applications.
    Gravel board LED
    LED lighting for garden edging and curbs.
    Gravitational load
    Weight/gravity load of a suspended LED profile; used for cable sizing.
    Gravity lock
    Diffuser locking system in an LED profile that utilizes gravity.
    Gray body
    Object with constant emissivity; an approximation used in LED thermal calculations.
    Gray body radiation
    Radiation from a gray body; used as a reference for LED colorimetric calibration.
    Gray finish
    Gray finish on LED profiles for industrial and modern environments.
    Grazer (fixture)
    LED fixture with a grazing beam designed to enhance surface textures.
    Grazing effect
    Lighting effect where light grazes a surface to emphasize its texture.
    Grazing fixture
    LED fixture specifically designed for grazing wall lighting.
    Grazing light
    LED light that skims a surface at a low angle to highlight its three-dimensionality and materiality.
    Grease-proof LED
    Grease-resistant LED fixture for food processing and industrial kitchens.
    Green architecture
    Sustainable architecture where LED lighting contributes to overall energy efficiency.
    Green Building
    Sustainable building practices where LED lighting enhances energy efficiency.
    Green building certification
    LEED or BREEAM certification where LED lighting contributes to scoring.
    Green certification
    Environmental certification for LED products (e.g., LEED, BREEAM, WELL).
    Green LED
    LED that emits green light (520–535 nm); a key component of RGB systems.
    Green LED (520-535 nm)
    Green LED with a peak wavelength between 520 and 535 nm.
    Green procurement
    Sustainable procurement of LED products with low environmental impact.
    Greenfield installation
    LED installation in a newly constructed building.
    Greenhouse LED
    Specialized LED lighting for greenhouses with spectra optimized for plant growth.
    Greenway LED
    LED lighting for greenways and bicycle paths.
    Grey finish
    Anthracite gray finish on LED profiles; offers a modern, discreet aesthetic.
    Grid calculation
    Illumination calculation performed on a point grid to verify LED uniformity.
    Grid ceiling
    Modular suspended ceiling grid designed to integrate standard LED profiles.
    Grid ceiling integration
    Integration of LED profiles into a suspended ceiling grid structure.
    Grid mount bracket
    Bracket for mounting LED fixtures to a suspended ceiling grid.
    Grid of calculation
    Matrix of points on a target surface for calculating LED illuminance.
    Grid of distribution LED
    Layout diagram showing the placement of LED fixtures in a space.
    Grid of valutazione LED
    Evaluation matrix with criteria for assessing LED product proposals.
    Grid optics
    Honeycomb or louvred structure placed in front of an LED source to control glare.
    Grid pattern
    Grid layout diagram for the regular placement of ceiling-mounted LED fixtures.
    Grid spacing
    Distance between calculation points in an LED lighting grid.
    Grid system
    Grid-based system for modular positioning of LED fixtures in suspended ceilings.
    Grill (grid protettiva)
    Metal protective grid placed in front of an LED source in industrial environments.
    Grille lamp
    LED fixture featuring an anti-glare grille for office lighting.
    Grip (presa)
    Holding force of a clip or mounting system to keep a profile securely in place.
    Grip angle
    Clamping angle of a mounting clip on an LED profile for secure fixing.
    Grip clip
    Reinforced holding clip for LED profiles in high-vibration environments.
    Grip ring
    Internal retaining ring in an LED profile that secures the diffuser.
    Grit blasting
    Sandblasting with abrasive grit to create a rough finish on LED profiles.
    Grommet (cable gland)
    Rubber ring for protected cable passage through holes in a profile.
    Groove (groove)
    Channel/groove in an LED profile for inserting the strip, diffuser, or gasket.
    Groove cutting tool
    Router or cutting tool used to mill grooves in wood or drywall for LED profiles.
    Groove depth
    Depth of the channel in an LED profile designed to house the LED strip.
    Groove for LED profile
    Milled recess in a surface for installing a recessed LED profile.
    Groove width
    Width of the channel in an LED profile.
    Grossista LED
    Wholesale distributor of LED products for installers and retailers.
    Ground (massa)
    Electrical reference connection at zero potential; essential for system safety.
    Ground bar
    Grounding busbar located in the LED system's electrical panel.
    Ground cable
    Grounding cable for LED system safety.
    Ground clamp
    Grounding clamp used to connect an LED fixture to earth.
    Ground conductor
    Earth conductor (yellow-green) in an LED electrical system.
    Ground electrode
    Grounding electrode for the LED system's safety earth connection.
    Ground fault interrupter
    Residual current device (RCD/GFCI) that protects LED circuits from earth leakage.
    Ground fault protection
    Earth fault protection for LED circuits.
    Ground loop
    Ground loop that can cause interference in LED systems; should be eliminated.
    Ground mount
    In-ground mounting of LED fixtures for landscape lighting.
    Ground plane
    Ground plane on an LED strip PCB for electrical stability.
    Ground rod
    Grounding rod for outdoor LED installations.
    Ground screw
    Earth screw for connecting the protective conductor.
    Ground terminal
    Earth terminal on an LED power supply for PE (protective earth) connection.
    Ground wire
    Yellow-green earth wire for LED system protection.
    Grounding bar
    Earth busbar in an electrical panel for grounding LED circuits.
    Grounding conductor
    Protective earth conductor connected to ground for LED system safety.
    Group address DALI
    DALI group address used for simultaneous control of multiple LED drivers.
    Group addressing
    Assignment of addresses to groups of LED fixtures for simultaneous control.
    Group control
    Simultaneous control of multiple LED fixtures grouped in the same zone.
    Group dimming
    Simultaneous dimming of all LED fixtures within a designated group.
    Group LED smart
    Grouping of smart LED fixtures for simultaneous control.
    Group of continuity (UPS)
    Uninterruptible power supply (UPS) that ensures continuous LED power during electrical blackouts.
    Group scene
    Lighting scene assigned to a specific group of LED fixtures.
    Group switching
    Simultaneous on/off switching of a group of LED fixtures.
    Grow box
    Indoor cultivation chamber equipped with dedicated LED lighting.
    Grow light application
    LEDs specifically designed for indoor plant cultivation.
    Grow light bar
    Rigid LED light bar with a spectrum optimized for indoor plant cultivation.
    Grow light controller
    Specialized controller for managing light/dark cycles in LED grow lighting.
    Grow light panel
    LED panel featuring a spectrum optimized for plant growth.
    Grow light spectrum
    LED spectrum optimized for photosynthesis, with peaks in blue (450 nm) and red (660 nm).
    Grow light timer
    Specialized timer for programming light/dark cycles in LED horticulture.
    Grow room
    Indoor cultivation room equipped with specialized LED lighting.
    Grow spectrum
    LED spectrum optimized for photosynthesis, featuring peaks in blue (450 nm) and red (660 nm).
    Grow tent
    Indoor cultivation tent equipped with LED lighting for plants.
    GU10 (fitting)
    Twist-and-lock socket for retrofit LED spotlights; not related to LED strips.
    Guanti isolanti
    Insulating gloves for safe electrical work on LED systems.
    Guard glass
    Protective glass shield placed in front of the LED source in harsh environments.
    Guard rail LED
    LED lighting integrated into roadway guardrails for enhanced safety.
    Guest room LED
    LED lighting for hotel guest rooms; features customizable lighting scenes.
    Guide light lateral
    Edge-lit PMMA panel that distributes light evenly across its surface.
    Guide of light (light guide)
    Transparent plastic optical component that transports and distributes light from an LED source.
    Guide rail (profile)
    Track within an LED profile designed for sliding in and securing the diffuser.
    Guide to the calculation LED
    Manual for performing lighting calculations using LED sources.
    Guide to the choice LED strip
    Document to help select the appropriate LED strip for a specific application.
    Guide to the choice of the driver
    Document to help select the appropriate LED driver for a project.
    Guide to the choice of the profile
    Document to help select the appropriate LED profile for an application.
    Guide to the compatibility LED
    Document for verifying compatibility between LED strips, profiles, and drivers.
    Guide to the cutting LED strip
    Instructions for correctly cutting an LED strip at designated cut points.
    Guide to the design LED
    Professional manual for designing LED lighting installations.
    Guide to the installation LED
    Step-by-step manual for installing an LED lighting system.
    Guide to the maintenance LED
    Document outlining maintenance procedures for an LED system.
    Guide to the mounting LED profile
    Step-by-step instructions for installing an LED profile.
    Guide to the purchase LED
    Document to guide the selection of LED products for a specific project.
    Guide to the replacement LED
    Procedure for replacing an LED strip within a profile.
    Guide to the sizing LED
    Document for correctly sizing LED strips, drivers, and cables.
    Gutter mount
    Mounting of an LED strip inside a gutter or drainage channel for perimeter lighting.
    Guy wire
    Anchoring tension cable/wire for outdoor LED lighting poles.
    Gym lighting LED
    LED lighting for gyms; features high uniformity and flicker-free operation.
    ↑ Back to top

    H

    H-bar profile
    LED profile with H-shaped cross-section for double strip or bidirectional emission.
    H-bridge
    Bridge circuit for polarity inversion; used in bidirectional LED drivers.
    H-profile
    LED profile with H-shaped cross-section for double luminous emission.
    Habitable room lighting
    LED lighting for habitable environments compliant with standards.
    Habitat intelligent LED
    Domestic environment with LED lighting integrated into a smart home system.
    Habitat LED
    LED lighting designed to improve the quality of the living environment.
    Habitat luminous LED
    Residential environment with LED lighting optimized for wellness.
    Hacksaw
    Hacksaw for manual cutting of aluminum LED profiles.
    Haitz's Law
    Empirical observation according to which the luminous flux per LED doubles every 36 months, analogous to Moore's Law.
    Half mirror LED
    Semi-transparent mirror with LED strip for infinite effect.
    Half round profile
    LED profile with semicircular cross-section for a rounded effect.
    Half-life
    Time after which the LED has lost 50% of its initial flux (L50).
    Half-power angle
    Angle at which the LED intensity drops to 50% of the peak; synonymous with beam angle.
    Halide perovskite
    Emerging material for LEDs with pure and adjustable emission.
    Halide-free cable
    Halogen-free cable for fire safety in LED installations.
    Hall effect sensor
    Magnetic sensor used for counting or positioning in automated LED systems.
    Hall hotel LED
    LED lighting for hotel lobbies; welcome scenarios.
    Hall sensor switch
    Hall effect switch for magnetic activation of LEDs.
    Hallway lighting
    LED lighting for corridors and passages.
    Hallway sensor
    Corridor sensor for sequential activation of LED lighting.
    Halo (profile)
    Circular suspended LED profile that creates a luminous ring.
    Halo effect
    Soft luminous halo around the LED source; a decorative effect sought in architecture.
    Halo luminous profile
    Halo of light around the LED profile due to reflection on the surface.
    Halogen dimmer compatibility
    Compatibility of halogen dimmers with LED drivers.
    Halogen replacement
    Replacement of halogen lamps with equivalent LED sources.
    Halogen to LED conversion
    Conversion of halogen installations to LED; retrofit.
    Halogen-free (HF)
    Halogen-free material; for LED cables and enclosures in public buildings.
    Halogen-free cable
    Halogen-free cable for fire safety in LED installations.
    Hammer drill
    Percussion drill for drilling masonry for LED mounting.
    Hammer finish
    Hammered finish on decorative LED profiles; artisanal effect.
    Hammerhead bracket
    T-shaped bracket for fixing to LED guides and tracks.
    Hand gesture control
    Control of LED lighting via hand gestures detected by sensors.
    Hand sensor
    Sensor that detects hand movement to turn on under-cabinet LEDs.
    Hand soldering
    Manual soldering with a soldering iron on LED strip pads.
    Hand tool
    Manual tool for installing profiles and LED strips.
    Hand wave sensor
    Sensor that activates LEDs with a hand gesture.
    Hand wave switch
    Switch that activates LEDs with a hand gesture.
    Handle (profile)
    Handle integrated into the LED profile to facilitate installation and maintenance.
    Handle mount LED
    LED lighting integrated into furniture and door handles.
    Handover document
    Documentation for the delivery of the LED system to the end customer.
    Handrail lighting
    LED lighting integrated into stair and balcony handrails.
    Hangar LED
    LED lighting for aircraft hangars; high power.
    Hangar lighting LED
    LED lighting for aircraft hangars; high power and uniformity.
    Hanger bolt
    Double-threaded bolt for suspending LED profiles from wood.
    Hanger wire
    Suspension wire for LED profiles hanging from the ceiling.
    Hanging bracket
    Suspension bracket for LED profiles from the ceiling.
    Hanging height
    Suspension height of a pendant LED profile from the ceiling.
    Hanging wire
    Steel wire for suspending LED profiles.
    Hard ceiling
    Rigid ceiling in which LED profiles are recessed with milling.
    Hard hat LED
    LED lighting integrated into safety helmets for construction sites.
    Hard wire
    Fixed and permanent electrical connection of the LED fixture.
    Hard wired sensor
    Wired sensor for controlling LED lighting.
    Hardscape lighting
    LED lighting of architectural elements in stone, wood, and metal in the landscape.
    Hardware compatible
    Fasteners and accessories compatible with a specific LED profile.
    Hardware kit
    Set of fasteners for LED profile installation: screws, anchors, clips.
    Hardware of connection LED
    Connectors, cables, and terminals for the LED system.
    Hardware of fixing
    Screws and fasteners for mounting the LED profile.
    Hardware of fixing profile
    Screws, clips, anchors, and brackets for mounting the LED profile.
    Hardware of mounting
    Complete set of accessories for LED profile installation.
    Hardware of suspension LED
    Cables, hooks, and tensioners for suspending LED profiles.
    Hardwired
    Permanent electrical connection; typical of professional LED installations.
    Harmonic distortion
    Harmonic distortion introduced by the LED driver on the grid; limited by standard EN 61000-3-2.
    Harmonics filter
    Filter to reduce harmonics generated by the LED power supply on the grid.
    Harness (wiring)
    Set of preassembled cables for quick connection of the LED system.
    Harsh environment LED
    LED fixture for harsh environments: industrial, chemical, marine.
    Harvest mode
    Light sensor mode that regulates LEDs based on natural light.
    Hatch mount
    Mounting of LED fixtures on hatches and access panels.
    Hazard warning LED
    Hazard warning LED light; flashing.
    Hazardous area LED
    LED fixture for hazardous areas with explosion risk (ATEX).
    Hazardous location class
    Classification of hazardous areas for selecting LED fixtures.
    Haze
    Light diffusion in a transparent material; expressed as a percentage.
    Haze value
    Diffused opacity value of an LED diffuser; expressed as a percentage.
    HCL (Human Centric Lighting)
    Design approach that adjusts LED color temperature and intensity to the human circadian rhythm.
    HCL controller
    LED controller dedicated to Human Centric Lighting with circadian adjustment.
    HCL design
    Design of circadian LED lighting for human wellness.
    HCL profile
    Circadian light profile programmed into the LED controller throughout the day.
    HCL schedule
    Time-based programming of CCT and LED intensity for circadian wellness.
    HCL sensor
    Sensor dedicated to measuring light for circadian LED control.
    HCL software
    Software for managing and programming Human Centric Lighting LEDs.
    HDMI (for LED video)
    Video interface used to send content to LED matrices and displays.
    Head rail LED
    Upper track with integrated LED strip for lighting curtains and drapes.
    Head room
    Available space above the false ceiling for LED profiles and cabling.
    Headboard LED
    LED lighting integrated into the bed headboard.
    Headboard lighting
    LED lighting integrated into the bed headboard.
    Header (connector)
    Pin connector on PCB for indoor wiring of LED controllers.
    Header cable
    Cable with pin connector for connection to LED controller PCB.
    Headroom clearance
    Free space above the false ceiling required for LED installation.
    Health care LED
    LED lighting for healthcare facilities; high CRI and flicker-free.
    Health lighting
    LED lighting designed for occupant wellness and health.
    Health monitoring (LED)
    Monitoring of the LED system's health status for predictive maintenance.
    Heat (dissipation of the)
    Process of disposing of heat generated by LEDs; essential for performance and lifespan. See "Thermal dissipation".
    Heat affected zone
    Area of the LED profile thermally influenced by the proximity of the strip.
    Heat aging test
    Accelerated thermal aging test to predict LED lifespan.
    Heat balance
    Thermal balance of the LED system: heat generated vs. heat dissipated.
    Heat balance equation
    Thermal balance equation for sizing the LED profile.
    Heat barrier coating
    Thermal barrier coating to protect sensitive surfaces from LED heat.
    Heat break
    Thermal interruption in the LED profile to prevent heat propagation.
    Heat capacity
    Thermal capacity of the LED profile; amount of absorbable heat.
    Heat channel
    Heat conduction channel in the LED profile from the strip to the environment.
    Heat conduction
    Thermal conduction through solid materials of the LED system.
    Heat convection
    Thermal convection of air around the LED profile for dissipation.
    Heat cycle test
    Test of repeated thermal cycles to verify LED system robustness.
    Heat damage
    Damage to LED components caused by excessive temperatures.
    Heat deflection temperature
    Temperature at which the LED diffuser begins to deform.
    Heat dissipation area
    Total surface area of the profile available for heat disposal.
    Heat dissipation calculation
    Calculation of the thermal dissipation capacity of the LED profile.
    Heat dissipation capacity
    Maximum thermal dissipation capacity of the LED profile.
    Heat distribution
    Distribution of heat along the LED profile.
    Heat emission
    Emission of heat from the surface of the LED profile.
    Heat exchanger
    Heat exchanger in very high-power LED systems with liquid cooling.
    Heat flow
    Heat flow from the LED chip through the PCB and profile to the environment.
    Heat flux
    Heat flow per unit area; critical in LED thermal design.
    Heat generation
    Amount of heat produced by the LED; approximately 60-80% of absorbed power.
    Heat generation calculation
    Calculation of heat generated by the LED strip in the profile.
    Heat load calculation
    Calculation of thermal load generated by the LED system in the environment.
    Heat management
    See Thermal management. Overall management of heat in LED systems.
    Heat map analysis
    Analysis of the thermal distribution of the LED system via thermal camera.
    Heat output
    Amount of heat emitted by the LED system into the environment.
    Heat path optimization
    Optimization of the thermal path from the LED chip to the environment.
    Heat pipe
    Heat transfer tube for advanced thermal dissipation in high-power LED systems.
    Heat radiation
    Thermal radiation from the surface of the LED profile; contributes to dissipation.
    Heat recovery
    Recovery of heat generated by LEDs for heating environments.
    Heat resistance
    Heat resistance of profile and LED diffuser materials.
    Heat resistant cable
    Cable with insulation resistant to high temperatures; for areas near high-power LEDs.
    Heat rise
    Temperature increase of the LED system relative to the environment.
    Heat sensitive surface
    Surface sensitive to heat on which the LED profile requires insulation.
    Heat shield
    Thermal shield to protect sensitive components from LED heat.
    Heat shrink boot
    Shaped heat-shrink protection for Y and T LED connectors.
    Heat shrink tubing
    Heat-shrink tube for sealing LED strip connections.
    Heat sink
    See "Heat sink". Metallic element with fins for disposing of LED heat.
    Heat sink area
    Surface area of the heat sink or LED profile available for thermal exchange.
    Heat sink clip
    Clip for fixing additional heatsinks to LED profiles.
    Heat sink color
    Color of the LED heat sink surface; black has higher emissivity.
    Heat sink fan
    Fan mounted on the heat sink for forced cooling of power LEDs.
    Heat sink grease
    Thermally conductive grease between LED chip and heat sink; improves contact.
    Heat sink material
    Material of the LED heat sink: aluminum, copper, graphite.
    Heat sink paste
    Thermally conductive paste for the interface between LED PCB and profile heat sink.
    Heat sink profile
    LED profile designed primarily for thermal dissipation.
    Heat sink selection
    Choice of heat sink based on LED power and maximum temperature.
    Heat sink size
    Dimensions of the heat sink necessary for LED thermal management.
    Heat sink surface treatment
    Surface treatment of the LED heat sink to improve emissivity.
    Heat sink temperature
    Temperature measured on the surface of the LED heat sink during operation.
    Heat sink thermal resistance
    Thermal resistance of the heat sink; in degrees Celsius per Watt.
    Heat soak test
    Prolonged heating test to stabilize LED performance.
    Heat source
    Heat source in the LED system; the chip is the main one.
    Heat spreader
    Metallic layer in the PCB that distributes heat uniformly.
    Heat spreading layer
    Layer of thermally conductive material that distributes heat in the LED PCB.
    Heat stress relief
    Techniques to reduce thermal stress on LED components.
    Heat trace
    Thermal tracing along the LED profile to verify hot spots.
    Heat transfer coefficient
    Heat transfer coefficient from the LED profile to the air.
    Heat treatment
    Thermal treatment of aluminum to optimize the mechanical properties of the LED profile.
    Heat up time
    Time required for the LED system to reach operating temperature.
    Heat zone
    Zone of the LED profile where the temperature is highest.
    Heated lens
    Heated lens to prevent ice formation on outdoor LEDs.
    Heater (for LED)
    Heater for LED fixtures in extremely low-temperature environments.
    Heater integration
    Integration of a heating element into the LED profile for cold environments.
    Heating effect
    Local heating effect caused by LED heat.
    Heating element integration
    Integration of heating elements with LED profiles in cold climates.
    Heatsink compound
    Thermal compound applied between LED and heat sink; see Thermal paste.
    Heatsink design
    Design of the heat sink or LED profile for optimal thermal management.
    Heatsink efficiency
    Efficiency of the heat sink in transferring LED heat to the environment.
    Heatsink extrusion
    Extruded aluminum heat sink profile for high-power LEDs.
    Heatsink fin spacing
    Distance between heat sink fins; optimized for natural convection.
    Heavy duty bracket
    Reinforced bracket for large or heavy LED profiles.
    Heavy duty cable
    Reinforced cable for powering high-power LED installations.
    Heavy duty clip
    Reinforced clip for fixing heavy LED profiles.
    Heavy duty connector
    Reinforced industrial connector for high-power LED systems.
    Heavy duty profile
    Reinforced LED profile for industrial and walkable applications.
    Height adjustable bracket
    Height-adjustable bracket for LED profiles.
    Height adjustable pendant
    Suspended LED profile with adjustable height via cable reel.
    Height minimum of recess
    Minimum space above the false ceiling to accommodate a recessed LED profile.
    Height of installation
    Vertical distance between the LED source and the surface to be illuminated; influences illuminance level.
    Height of the diffuser
    Vertical dimension of the LED profile cover; influences optical mixing.
    Height of the LED profile
    Total vertical dimension of the LED profile cross-section.
    Height of the profile
    Total vertical dimension of the LED profile; critical for recessing.
    Height sensor
    Height sensor to automatically adjust LED lighting based on position.
    Height sensor LED
    Sensor that adjusts LED brightness based on installation height.
    Height utile of mixing
    Minimum distance between the LED strip and the diffuser to achieve uniform light.
    Helical LED
    LED strip mounted in a spiral on a tubular structure for a decorative effect.
    Helipad LED
    LED lighting for helipads; signage and approach lighting.
    Hermetic connector
    Hermetic connector for LED systems in pressurized environments.
    Hermetic enclosure
    Hermetic enclosure for LED power supplies in critical environments.
    Hermetic package
    LED package hermetically sealed against gas and humidity.
    Hermetic seal
    Hermetic sealing of an LED component against gas and humidity.
    Hermeticity
    Degree of hermetic sealing of an LED component against gas and humidity.
    Hex bolt
    Hexagonal bolt for fixing LED brackets and supports.
    Hex color code
    Hexadecimal color code used in RGB LED control apps.
    Hex socket screw
    Allen screw for mounting LED profiles with a hex key.
    Hexagonal profile
    LED profile with hexagonal cross-section for decorative applications.
    HID replacement
    Replacement of high-intensity discharge lamps with LED sources.
    HID to LED conversion kit
    Kit for converting discharge fixtures to LED.
    HID to LED retrofit
    Conversion of HID discharge fixtures to LED.
    Hidden driver
    Power supply hidden above surface-mounted fixtures, in false ceilings, furniture, or niches.
    Hidden fastener
    Hidden fastening of the LED profile for clean aesthetics.
    Hidden LED
    Completely invisible LED lighting; only the luminous effect is perceptible.
    Hidden profile
    LED profile completely recessed and invisible in the surface.
    High ambient operation
    LED operation at elevated ambient temperatures with derating.
    High ambient temperature
    High ambient temperature that requires derating of the LED power supply.
    High bay controller
    Specific controller for managing industrial LED high bays.
    High bay driver
    LED driver for industrial high bays with high power.
    High Bay LED
    High-power LED fixture for lighting environments with high ceilings (warehouses, workshops).
    High bay mounting
    Mounting of LED high bays on high industrial ceilings.
    High bay sensor
    Presence sensor for industrial LED high bays at elevated heights.
    High bay spacing
    Distance between LED high bays for uniform warehouse lighting.
    High bay UFO
    Disc-shaped industrial LED high bay for high ceilings.
    High brightness LED
    Very high brightness LED; exceeding 200 lm/W efficacy.
    High CCT (>5000K)
    High color temperature for industrial and technical applications.
    High CCT LED strip
    LED strip with high color temperature (>5000K) for technical applications.
    High color saturation LED
    LED with particularly saturated and vivid colors for decorative applications.
    High CRI
    LED with color rendering index ≥90; essential for applications where color fidelity is critical.
    High CRI R9>90
    LED with excellent saturated red rendering; for food, art, and retail.
    High density (strip)
    LED strip with a high number of LEDs per meter (≥120 LED/m) for a more uniform light line.
    High density COB
    COB strip with over 500 LEDs per meter; perfectly continuous light line.
    High density strip 240 LED/m
    High-density LED strip with 240 chips per meter.
    High density strip 352 LED/m
    Very high-density LED strip with 352 chips per meter.
    High density strip 480 LED/m
    Extremely dense LED strip with 480 chips per meter.
    High density strip 700 LED/m
    Maximum density LED strip with 700 chips per meter.
    High efficiency driver
    LED power supply with efficiency greater than 93%.
    High efficiency strip
    LED strip with luminous efficacy greater than 180 lm/W.
    High fidelity color
    High fidelity color rendering with Rf greater than 90 (TM-30).
    High flux LED
    LED chip designed to emit a very high luminous flux.
    High flux strip
    LED strip with luminous flux greater than 3000 lm/m.
    High frequency driver
    LED driver operating at high switching frequency to reduce EMI.
    High humidity environment
    High humidity environment requiring adequate IP protection for LEDs.
    High impedance
    High impedance of the LED control circuit; for DALI and 0-10V signals.
    High impedance input
    High impedance input of a 0-10V dimmer to avoid loading the signal.
    High intensity discharge (HID)
    High-intensity discharge lamps replaced by LEDs.
    High mast LED
    LED fixture for tall poles (over 12 m).
    High output COB strip
    High-power COB strip for primary lighting.
    High output strip
    High-emission LED strip; over 2000 lm/m.
    High performance adhesive
    High-performance adhesive for LED strips in harsh conditions.
    High power (strip)
    LED strip with power greater than or equal to 19.2 W/m; for primary lighting.
    High power connector
    Connector rated for high currents in high-power LED installations.
    High power density
    High power density per unit area; requires effective dissipation.
    High power density strip
    LED strip with power greater than 24 W/m.
    High power strip 24W/m
    24W/m LED strip for task and primary lighting.
    High power strip 36W/m
    36W/m LED strip for high-power lighting.
    High power strip 48W/m
    48W/m LED strip for special very high-power applications.
    High purity aluminum
    High-purity aluminum for indoor LED reflectors.
    High temperature adhesive
    Special double-sided tape for LED strips in hot environments (>60°C).
    High temperature LED
    LED designed for operation at ambient temperatures above 60°C.
    High voltage cable
    Cable for the primary side of the LED power supply (230V AC).
    High voltage driver
    LED driver with output voltage greater than 60V DC.
    High voltage LED strip
    LED strip operating at mains voltage (230V AC) with integrated rectifier.
    High-bay industrial LED
    Suspended LED fixture for industrial warehouses; see High Bay.
    High-density strip
    LED strip with high chip density (≥120 LED/m); for dot-free effect and uniform lighting.
    Highlight
    Point of maximum brightness in a scene illuminated by LEDs.
    Hinge bracket
    Hinged bracket to orient an LED profile after installation.
    Hinge mount
    Hinged support for LED profiles adjustable after installation.
    Hinged diffuser
    Hinged diffuser that opens for access to the LED strip.
    Histogram luminous
    Graph of illuminance level distribution in an LED environment.
    Historical building lighting
    LED lighting for historical buildings; discreet integration and low invasiveness.
    HLG (series Mean Well)
    Family of Mean Well outdoor power supplies (IP65/IP67) widely used for professional LED installations.
    Hold current
    Maintenance current of a PTC fuse; below which it resets.
    Hold time (dimmer)
    Maintenance time of the dimming level after releasing the command.
    Holder (support)
    Any element that supports or contains an LED component.
    Hole cable gland
    Opening in the LED profile end cap for cable passage.
    Hole drainage
    Opening in the LED profile to allow condensation or water drainage.
    Hole in the ceiling for LED
    Opening in the ceiling for installing a recessed LED profile.
    Hole of fixing
    Hole in the LED profile for the passage of the mounting screw.
    Hole of recess circular
    Round hole in the ceiling for LED downlight; standard diameter.
    Hole of recess profile
    Milled recess in the surface for inserting a recessed LED profile.
    Hole of recess rectangular
    Rectangular hole in the surface for a recessed LED profile.
    Hole of ventilation
    Opening in the LED profile for air circulation and dissipation.
    Hole pre-drilled
    Pre-drilled hole in the LED profile to facilitate mounting.
    Hole through-hole profile
    Hole in the LED profile for passing screws or cables.
    Holiday lighting (RGB)
    Decorative color LED lighting for events and holidays.
    Hollow profile
    LED profile with hollow cross-section for internal cable passage.
    Hollow section profile
    LED profile with hollow cross-section for lightness and internal cable passage.
    Holographic diffuser
    Diffuser with holographic pattern for controlled light distribution.
    Home automation
    Home automation with intelligent management of LED lighting.
    Home automation gateway
    Smart home gateway for connecting smart LED devices to the network.
    Home cinema bias LED
    LED strip behind the screen for bias lighting in home cinema.
    Home lighting design
    Design of LED lighting for residential environments.
    Home office LED
    LED lighting for domestic workstations; ergonomic.
    Home run cable
    Main cable connecting the electrical panel to the first LED fixture on the line.
    Home theater lighting
    LED lighting for home theater rooms; bias lighting and scenarios.
    Homologation
    Certification process for an LED product in compliance with current regulations in different markets.
    Honeycomb louver
    Honeycomb grid for extreme anti-glare control.
    Honglitronic chip
    LED chip from Chinese manufacturer Honglitronic for LED strips.
    Hood (cap)
    Protective cover applied to unused LED connectors.
    Hook mount
    Hook fixing for quick suspension of LED fixtures.
    Horizon glow
    LED glow at the horizon; to be minimized in dark sky compliant fixtures.
    Horizontal beam spread
    Horizontal width of the LED beam.
    Horizontal cove
    Horizontal cove in the ceiling or wall for indirect LED strip.
    Horizontal illuminance
    Illuminance measured on a horizontal plane; base parameter for calculations.
    Horizontal profile mount
    Horizontal mounting of the LED profile on a surface.
    Horn antenna
    Horn antenna used in EMC testing of LED power supplies.
    Horsepower (lighting load)
    Lighting load power in equivalent terms; for sizing.
    Horticultural LED
    LED optimized for horticulture with specific spectrum for plant growth.
    Horticultural spectrum
    Optimized LED spectrum with peaks in blue (440-460 nm) and red (620-670 nm).
    Hospital application
    LEDs for hospitals; high CRI, flicker-free, dimmable, and emergency-ready.
    Hospital grade LED
    LED lighting with special requirements for hospital environments.
    Hospital LED
    LED lighting for hospitals; HCL, emergency, and high CRI.
    Hospitality application
    LEDs for hotels, restaurants, and spas; emphasis on atmosphere and comfort.
    Hospitality lighting
    LED lighting designed for hotels, restaurants, and hospitality facilities.
    Host (controller)
    Main device that manages the LED control network.
    Hot aisle containment
    Heat containment in server rooms; LED lighting reduces thermal load.
    Hot cathode
    Warm cathode in fluorescent tubes; absent in LED technology.
    Hot cathode lamp
    Warm cathode lamp (fluorescent); replaced by LEDs.
    Hot dip galvanizing
    Hot-dip galvanizing for outdoor LED brackets and supports.
    Hot melt
    Thermoplastic adhesive for sealing LED connections and components.
    Hot melt adhesive
    Thermoplastic sealant for sealing LED connections and components.
    Hot mirror
    Mirror that reflects infrared and transmits visible light; for LED thermal filters.
    Hot plug
    Ability to connect or disconnect an LED device without turning off the system.
    Hot spot
    Zone of anomalous luminous or thermal concentration; to be avoided to ensure uniformity and reliability.
    Hot start
    Quick LED restart after switching off; without delay.
    Hot swap
    Replacement of an LED component while hot without turning off the system.
    Hotel corridor lighting
    LED lighting for hotel corridors; sensors and nighttime dimming.
    Hotel LED design
    Design of LED lighting for hospitality facilities.
    Hotel room LED design
    Design of LED lighting for hotel rooms with scenarios.
    Hotspot analysis
    Analysis of hot spots on the LED strip via thermal camera.
    Hour counter
    Integrated operating hours counter in the LED driver.
    Hour meter
    Operating hours counter; for planning LED maintenance.
    Farmhouse LED
    LED lighting for farmhouses and rustic buildings.
    Passive house LED
    LED lighting for passive buildings; maximum energy efficiency.
    Household LED
    LED lighting for residential domestic use.
    Housing
    Enclosure or body of an LED fixture that defines shape and protection.
    Housing material
    Material of the LED fixture enclosure: aluminum, steel, plastic.
    Housing of the LED driver
    Enclosure of the LED power supply: plastic, metal, resin.
    Housing of the strip
    Cavity in the LED profile sized to accommodate the strip with double-sided tape.
    HSB/HSV (model color)
    Color model based on Hue, Saturation, and Brightness; used in LED apps.
    HSL color model
    Hue-Saturation-Lightness color model used in LED control interfaces.
    Hub and spoke
    LED network topology with central hub and peripheral devices.
    Hub of control LED
    Hub that manages and coordinates all LED devices in the system.
    Hub Philips Hue
    Specific gateway for the Philips Hue Zigbee LED control system.
    Hub smart home
    Smart home hub that coordinates Zigbee, Bluetooth, or Z-Wave LED devices.
    Hub smart LED
    Hub that connects and coordinates smart LED devices.
    Hue (tinta)
    Color attribute that distinguishes red from blue from green; HSB parameter.
    Hue Bridge
    Philips gateway for the Hue Zigbee LED lighting system.
    Hue gradient strip
    Philips Hue LED strip with color gradient along its length.
    Hue rotation
    Rotation of hue in the HSB model for LED color change effects.
    Human centric approach
    LED design approach centered on human wellness.
    Human Centric Lighting controller
    Specific LED controller for managing circadian light.
    Human Centric Lighting design
    LED lighting design centered on human wellness.
    Human Centric Lighting strip
    Tunable white LED strip for circadian lighting applications.
    Human factor LED
    Human factors considered in LED lighting design.
    Human factors
    Human factors in lighting design: comfort, wellness, productivity.
    Humidity rating
    Maximum environmental humidity tolerated by an LED component without performance degradation.
    Humidity sensor
    Humidity sensor for automatic protection of LED systems.
    Humidity test
    Test in a climatic chamber to verify LED resistance to humidity.
    HVAC integration
    Integration of LED with heating, ventilation, and air conditioning.
    HVAC zone
    Climatic zone of the building; LED zoning often coincides with HVAC zoning.
    Hybrid connector
    Connector that carries both power supply and data signal for LEDs.
    Hybrid cooling
    Combination of passive and active cooling for high-power LEDs.
    Hybrid dimming
    Combination of analog and digital dimming in the same system.
    Hybrid fixture
    LED fixture that combines direct and indirect lighting.
    Hybrid LED
    LED combining different technologies (e.g., COB + SMD) for optimized performance.
    Hybrid profile
    LED profile combining aluminum and plastic for lightness and dissipation.
    Hydraulic damper
    Hydraulic damper for controlling the closure of adjustable LED profiles.
    Hydraulic mount
    Support with hydraulic damping for LED fixtures in environments with vibrations.
    Hydrophobic coating
    Hydrophobic coating on outdoor LED profiles that repels water.
    Hydrostatic test
    Hydrostatic pressure test to verify IP sealing of underwater LED fixtures.
    Hyperion (software)
    Open-source software for controlling addressable LED strips via PC.
    Hz (Hertz)
    Unit of frequency measurement; in LEDs indicates PWM frequency or flicker frequency.
    ↑ Back to top

    J

    J-bolt
    J-bolt for suspending LED profiles from structures.
    J-box (junction box)
    Junction box for connections of the LED system.
    J-channel
    J-profile for edging and finishing of LED installations.
    J-hook
    J-hook for suspending cables and LED profiles.
    J-mount
    J-support for side mounting of LED fixtures.
    J-shaped bracket
    J-shaped bracket for fixing LED profiles.
    Jack barrel
    Cylindrical DC connector of various diameters for LED power supplies.
    Jack chain
    Decorative chain for suspending LED fixtures.
    Jack DC
    Standard cylindrical connector for DC power supply of LED strips and controllers (typically 5.5×2.1 mm).
    Jack DC female
    Panel-mounted DC socket for power supply connection.
    Jack DC male
    DC plug on the output cable of the power supply.
    Jack panel mount
    Panel-mounted DC socket for powering LED systems.
    Jack splitter
    DC connector splitter for powering two LED strips from a single output.
    Jacket (sheath cable)
    Outer protective sheath of the LED power supply cable.
    Jacket armor
    Armor of the LED cable sheath for mechanical protection.
    Jacket color
    Color of the LED cable sheath for identification: black, white, gray.
    Jacket material
    Material of the outer sheath of the LED cable; PVC, silicone, LSZH.
    Jacket stripper
    Tool for removing the outer sheath of the LED cable.
    Jacket stripping
    Stripping of the LED cable sheath for connection to terminals.
    Jacketed cable
    Cable with protective outer sheath for LED installations.
    Jam nut
    Thin lock nut for fixing connectors and cable glands on LED profiles.
    Jamb light
    LED lighting integrated in the door jamb.
    Japanese candle effect
    LED effect simulating the soft light of Japanese lanterns.
    Japanese candle LED
    Decorative LED lamp simulating a Japanese lantern.
    Japanese Industrial Standard (JIS)
    Japanese industrial standard; relevant for Japanese-made LEDs.
    Jaw coupling
    Elastic joint for the mechanical connection of adjustable LED fixtures.
    Jet black finish
    Glossy black finish on LED profiles for designer environments.
    Jet wash resistant
    LED fixture resistant to high-pressure washing (IP69K).
    Jetting (production)
    Deposition process of solder paste for LED strip production.
    Jetty lighting LED
    LED lighting for jetties and piers; resistant to marine corrosion.
    Jewellery lighting
    LED lighting for jewelry stores; CRI above 95 and CCT 4000K.
    Jewelry display LED
    LED lighting for jewelry showcases; high CRI and controlled CCT.
    Jewelry showcase LED
    Jewelry display case with internal LED strip for maximum rendering of precious materials.
    Jig (attrezzatura)
    Jig or template for precise positioning of LED strips and profiles.
    Jig alignment
    Alignment jig for precise positioning of the LED profile.
    Jig fixture
    Fixing jig for processing LED profiles.
    Jig of soldering
    Auxiliary tool that holds the strip in position during manual connector soldering.
    JIS standard
    Japanese industrial standard applicable to LED components.
    Job costing LED
    Calculation of costs for an LED lighting project.
    Job scheduling
    Scheduling of LED system installation activities.
    Job site LED
    Temporary LED lighting for construction sites.
    Job site lighting
    Temporary LED lighting for construction sites.
    Job site safety
    Safety on site during LED system installation.
    Joining bar
    Junction bar for connecting LED profiles in line.
    Joining bracket
    Junction bracket for connecting two LED profiles in line.
    Joining clip
    Metal clip for joining two sections of LED profile maintaining continuity.
    Joining hardware
    Set of components for the mechanical junction of LED profiles.
    Joining kit
    Kit with components for professional joining of two LED profile sections.
    Joining plate
    Flat plate connecting two LED profiles side by side or in line.
    Joint 45-degree corner
    Fitting between two LED profiles at 45 degrees.
    Joint 90-degree corner
    Fitting between two LED profiles at 90 degrees.
    Joint adjustable
    Fitting with variable angle between two LED profiles.
    Joint bracket
    Junction bracket for connecting two LED profiles.
    Joint compound
    Joint compound or sealant for finishing the junction between LED profile and drywall.
    Joint cover
    Decorative cover hiding the junction between two LED profiles.
    Joint dritto profile
    Straight-line fitting between two sections of LED profile.
    Joint filler
    Filling material for joints between LED profiles.
    Joint finishing
    Finishing of the junction between two LED profiles for a continuous appearance.
    Joint flexible
    Flexible element between two sections of LED profile for adaptation to curved surfaces.
    Joint gap
    Space between two adjacent LED profiles to minimize for continuity.
    Joint inspection
    Verification of the quality of the junction between LED profiles.
    Joint mechanical
    Mechanical connection between two sections of LED profile.
    Joint of connection profile
    Element that joins two sections of LED profile maintaining continuity.
    Joint of continuity
    Element that connects two LED profiles maintaining the continuous light line.
    Joint of expansion
    Element that allows thermal expansion between two LED profiles.
    Joint of junction corner
    Internal plate connecting two LED profiles at an angle.
    Joint of junction dritto
    Internal plate connecting two LED profiles in a straight line.
    Joint plate
    Internal joining plate for connecting two LED profiles in line.
    Joint profile dritto
    Fitting that connects two LED profiles in a straight line without interruption.
    Joint profile to 90 degrees
    Fitting that connects two LED profiles at 90 degrees with luminous continuity.
    Joint profile to T
    Fitting that connects three LED profiles in a T.
    Joint reinforcement
    Reinforcement of the junction between LED profiles for mechanical solidity.
    Joint seal
    Sealing of the junction between two LED strips to maintain IP protection.
    Joint sealant
    Sealant for joints of LED profiles in IP installations.
    Joint strength
    Mechanical strength of the junction between two sections of LED profile.
    Joint tape
    Tape for finishing the junction between LED profile and drywall.
    Joint test
    Verification test of the seal and continuity of the LED junction.
    Joint thermal
    Interruption in the LED profile to allow thermal expansion.
    Joint to 45 degrees profile
    Corner fitting at 45 degrees between two LED profiles.
    Joint to 90 degrees profile
    Corner fitting at 90 degrees between two LED profiles.
    Joint type
    Type of junction between LED profiles: straight, corner, T.
    Joint universal
    Adjustable fitting compatible with different angles between LED profiles.
    Jointing compound
    Sealing compound for joints between IP LED profiles.
    Jointing tape
    Adhesive tape for sealing LED strip joints.
    Joule (J)
    Unit of energy; used to calculate the heat dissipated by the LED.
    Joule effect
    Joule effect in the conductors of the LED strip; generates heat due to resistance.
    Joule heating
    Heating due to Joule effect in the conductors of the LED strip; to be minimized.
    Joule loss
    Energy loss due to Joule effect in the conductors of the LED strip.
    Journal (cuscinetto)
    Bearing for adjustable supports of LED fixtures.
    Journal bearing
    Plain bearing in adjustable supports for LED projectors.
    Journal publication
    Scientific publication on LED technology in specialized journals.
    Joystick controller
    LED controller with joystick for color and effect selection.
    JST (connector)
    Compact push-in connector type widely used in indoor wiring of LED systems.
    JST connector crimp
    Crimping of the JST connector for LED wiring.
    JST connector housing
    Body of the JST connector for housing LED contacts.
    JST connector pin
    Contact pin of the JST connector for LED strips.
    JST connector series
    Family of JST connectors used in the LED industry: SM, XH, PH, SH.
    JST PH
    JST PH series connector with 2 mm pitch for compact LED controllers.
    JST SH
    JST SH series connector with 1.0 mm pitch for micro LED connections.
    JST SM
    JST SM connector with snap-lock for addressable LED strips.
    JST XH
    JST connector for PCBs; used in LED controllers and drivers.
    JST ZH
    JST ZH series connector with 1.5 mm pitch for miniaturized LED systems.
    Jump wire
    Short wire for bridging segments or sections of LED strip.
    Jumper
    Short cable section connecting two interrupted LED strip segments, maintaining the continuity of the light line.
    Jumper bar
    Conductive bar connecting adjacent terminals on an LED terminal block.
    Jumper block
    Connection block for bypassing or connecting sections of the LED circuit.
    Jumper cable
    Short pre-made cable for bypassing a segment of LED strip.
    Jumper cable assembly
    Pre-made jumper cable for connecting sections of LED strip.
    Jumper configuration
    Configuration of jumpers on the LED controller board.
    Jumper link
    Jumper connection on a terminal block for bypassing or connecting LED terminals.
    Jumper pad
    Pad on the LED strip for bridging alternative configurations.
    Jumper setting
    Configuration via jumpers on LED controller boards.
    Jumper wire
    Short wire for bridging or bypassing faults on the LED strip.
    Junction accessory
    Component for joining two LED profiles in continuity: plate, bracket, or clip.
    Junction box
    Junction box for connections of the LED system.
    Junction box adapter
    Adapter for mounting an LED fixture on an existing junction box.
    Junction box bracket
    Bracket for mounting LED fixtures on branch boxes.
    Junction box cover
    Cover of the junction box for LED installations.
    Junction box entry
    Cable entry point in the junction box of the LED system.
    Junction box grounding
    Grounding of the junction box of the LED system.
    Junction box IP65
    Watertight junction box for outdoor LED installations.
    Junction box mounting
    Mounting of the LED fixture directly on a wall junction box.
    Junction fitting
    Junction fitting for LED cable conduits.
    Junction p-n
    Active zone of the LED chip where electron-hole recombination produces photons (light).
    Junction p-n (LED)
    Active zone of the LED chip where electrons and holes recombine emitting light.
    Junction temperature (Tj)
    Temperature of the p-n junction of the LED chip; critical parameter influencing brightness, color, and duration.
    Junction temperature calculation
    Calculation of the junction temperature of the LED based on operating conditions.
    Junction temperature derating
    Reduction of LED performance when Tj exceeds the optimal value.
    Junction temperature limit
    Maximum allowed temperature for the LED chip junction.
    Junction temperature measurement
    Measurement of the Tj temperature of the LED chip via indirect methods.
    Junction temperature monitoring
    Monitoring of the Tj temperature of the LED chip for protection.
    Junction thermal
    Contact point between the LED chip and the substrate; junction temperature (Tj) influences performance and useful lifetime.
    Junior spot LED
    Small LED spotlight for accent lighting in showcases and display cases.
    Jury mast light
    Emergency LED lighting on temporary structures.
    Just noticeable difference (JND)
    Minimum perceptible variation of brightness or color to the human eye.
    Just-in-time delivery
    Just-in-time delivery of LED components for warehouse optimization.
    Justification (illuminotecnica)
    Technical rationale for design choices in the LED system.
    Jute rope light
    Jute rope with integrated LED strip for rustic decorative lighting.
    Juvenile lighting
    LED lighting for children's rooms; safe, colored, and dimmable. ↑ Back to top

    K

    K factor
    Correction factor for thermal-magnetic circuit breakers considering the inrush current of LED power supplies.
    K-factor (lighting design)
    Maintenance factor in LED lighting calculation.
    Kaizen (process)
    Continuous improvement applied to the production of LED components.
    Kaizen (production LED)
    Continuous improvement philosophy applied to the production of LED strips.
    Kapton insulation
    Polyimide Kapton insulation for flexible circuits of LED strips.
    Kapton tape
    Heat-resistant polyimide tape for masking during LED strip soldering.
    Kelvin (K)
    Unit of measurement of color temperature; from 1800K (amber warm) to 15000K+ (ice white).
    Kelvin adjustment range
    CCT adjustment range in tunable white LED strips.
    Kelvin chart
    Reference table of LED color temperature and their applications.
    Kelvin halo
    Perceptible CCT variation between the center and edges of an LED beam.
    Kelvin meter
    Portable instrument for measuring the CCT of LED light.
    Kelvin preference
    User's preference of CCT for the LED lighting of the environment.
    Kelvin range
    Range of color temperature available for an LED strip.
    Kelvin scale
    Scale of color temperature from 1800K (amber) to 15000K (ice).
    Kelvin selection
    Selection of the desired CCT via DIP switch or controller.
    Kelvin shift
    Variation of the color temperature of an LED over the course of its useful lifetime.
    Kelvin stability
    Stability of the LED's CCT over time and with temperature changes.
    Kelvin step
    Minimum increment of adjustable CCT in a tunable white LED strip.
    Kelvin tolerance
    Tolerance on the declared CCT of the LED strip; typically +/- 100K.
    Kerf (cutting)
    Width of the saw cut for milling the housing of the LED profile.
    Kernel (firmware)
    Core of the firmware of the LED controller that manages the basic functions.
    Key card switch
    Key card switch for activation of LED lighting in hotel rooms.
    Key inglese
    Adjustable wrench for tightening nuts on LED brackets.
    Key light
    Main light in a scene; the dominant LED source.
    Key of programming
    Hardware or software key for LED system configuration.
    Key switch
    Key switch for safe control of LED lighting.
    Key to brugola
    Hex key for tightening recessed head screws on LED profiles.
    Keyhole bracket
    Bracket with keyhole for mounting with round-head screws.
    Keyhole mount
    Mounting system with keyhole for LED profiles.
    Keyhole slot
    Keyhole slot in the LED profile for concealed screw mounting.
    Keypad backlight
    Backlighting of keyboards and control panels.
    Keypad controller
    LED controller with physical keypad for scene selection and dimming.
    Keypad dimmer
    Dimmer with buttons for direct selection of LED levels and scenes.
    Keypad panel
    Control panel with keypad for managing LED lighting.
    Keystone bracket
    Trapezoidal bracket for corner correction in LED mounting.
    Keystone connector
    Modular keystone connector for LED signal distribution panels.
    Keystone correction
    Correction of trapezoidal distortion in LED projection on inclined surfaces.
    Keystone effect (lighting)
    Trapezoidal deformation of the LED beam on inclined surfaces.
    Kick plate LED
    Baseboard with integrated LED strip for floor-level lighting.
    Kick start
    Initial pulse for starting the LED power supply.
    Kickback voltage
    Transient voltage generated by switching inductive loads in the LED circuit.
    Kickplate LED
    LED lighting integrated into the kickplate of a door or cabinet.
    Kill switch
    Emergency switch for quick shutdown of the entire LED system.
    Kilolux
    Thousand lux; unit for high illuminance in special LED applications.
    Kilowatt (kW)
    Thousand Watts; unit for the total power of large LED installations.
    Kilowatt-hour (kWh)
    Unit of energy; for calculating the consumption of the LED system over time.
    Kinematic design
    Kinematic design of adjustable LED supports.
    Kinematic mount
    Kinematic mount for precise positioning of LED optics.
    Kinetic LED
    Artistic installation with moving LEDs for dynamic effects.
    King post LED
    LED lighting integrated in the central pillar of a structure.
    Kit complete installation
    Set with all clips, end caps, and screws for LED profile installation.
    Kit LED strip
    Complete set with LED strip, power supply, controller, and accessories ready for installation.
    Kit of connection
    Set with connectors and cables for connecting LED strips to power supplies and controllers.
    Kit of junction
    Set with connectors, cables, and sleeves for professional LED strip joints.
    Kit of junction corner
    Set with connectors and plates for corner joints between LED profiles.
    Kit of mounting
    Set with clips, screws, end caps, and accessories for LED profile installation.
    Kit of suspension adjustable
    Set with cables and tensioners for adjustable suspension of the LED profile.
    Kit retrofit LED
    Complete set for converting a traditional fixture to LED.
    Kitchen application
    LED lighting for kitchens; under-cabinet, island, and hood lighting with high color rendering.
    Kitchen cabinet LED
    LED lighting inside kitchen cabinets.
    Kitchen ceiling LED
    Ceiling-mounted LED lighting for kitchens; high CRI and uniformity.
    Kitchen counter LED
    LED lighting for the kitchen work surface.
    Kitchen counter LED lighting
    LED lighting for kitchen work surfaces under wall cabinets.
    Kitchen downlight
    LED downlight specific for kitchens with IP44 protection.
    Kitchen hood LED
    LED lighting integrated in the kitchen range hood.
    Kitchen island LED
    Suspended LED lighting above the kitchen island.
    Kitchen island lighting
    LED lighting for the kitchen island; suspended linear profiles.
    Kitchen LED strip
    LED strip specifically for under-cabinet and kitchen work surface lighting.
    Kitchen lighting design
    Design of LED lighting for kitchens; task + ambient + accent.
    Kitchen plinth LED
    LED strip in the kitchen plinth for floor-level lighting.
    Kitchen strip
    LED strip specific for kitchens; high CRI, minimum IP44, CCT 3000-4000K.
    Kitchen task lighting
    Functional LED lighting for the kitchen work surface.
    Kitchen under-cabinet LED
    LED light under kitchen wall cabinets for the work surface.
    Kite mount
    Diamond-shaped mounting for diagonal fixing of LED profiles.
    Kitting
    Packaging of a complete kit of strip, profile, power supply, and LED accessories.
    Kitting service
    Packaging service for customized LED kits with all components.
    Klüber (grasso thermal)
    Quality thermally conductive grease used to improve thermal contact between strip and profile.
    Knee wall LED
    LED lighting integrated in architectural knee walls.
    Knee wall lighting
    LED lighting in the knee wall of an attic.
    Knife edge beam
    LED beam with very sharp edges for precise light cuts.
    Knife switch
    Knife switch for sectioning industrial LED circuits.
    Knob dimmer
    Dimmer with rotary knob for LED brightness adjustment.
    Knockout
    Pre-punched hole in the LED power supply enclosure for cable entry.
    Knockout plug
    Plug for closing unused knockout holes in the LED power supply.
    Knot (nodo, network)
    Connection point in a LED control network.
    Knowledge base (LED)
    Database of technical information and FAQs on LED products.
    Knurled finish
    Knurled finish on LED profiles for non-slip grip or industrial aesthetics.
    KNX
    Open standard bus protocol (ISO/IEC 14543) for building automation, including LED management.
    KNX actuator
    KNX control actuator for LED fixtures.
    KNX actuator channel
    Channel of the KNX actuator for controlling an LED group.
    KNX address table
    Table of KNX addresses of LED devices in the system.
    KNX binary input
    KNX binary input for interfacing buttons and contacts with the LED system.
    KNX brightness sensor
    KNX brightness sensor for LED daylight harvesting.
    KNX bus cable
    KNX bus cable (2x2x0.8 mm, green) for connecting LED devices.
    KNX bus coupler
    KNX bus coupler for interfacing LED actuators.
    KNX central function
    Central KNX function for simultaneous control of all LEDs.
    KNX commissioning tool
    ETS software for programming and configuring the KNX-LED system.
    KNX constant light control
    KNX constant light control that regulates LEDs based on natural light.
    KNX controller
    LED controller compatible with the KNX protocol for building automation.
    KNX coupling unit
    Coupling unit for connecting segments of the KNX bus.
    KNX DALI gateway 64
    KNX-DALI gateway for controlling up to 64 LED drivers.
    KNX diagnostic
    KNX diagnostics for verifying the status of LED devices.
    KNX dimming actuator
    KNX actuator for dimming LED circuits.
    KNX ETS software
    Engineering Tool Software for programming KNX-LED systems.
    KNX group object
    KNX group object for communication between LED devices.
    KNX input module
    KNX input module for buttons and sensors in the LED system.
    KNX IP gateway
    Gateway connecting the KNX bus to the IP network for remote management.
    KNX IP router
    KNX router on the IP network for remote management of LED lighting.
    KNX LED dimmer module
    Specific KNX module for dimming LED strips and drivers.
    KNX line coupler
    KNX line coupler for expanding the LED lighting network.
    KNX logic module
    KNX logic module for creating automations in LED lighting.
    KNX motion detector
    KNX motion detector for automatic LED activation.
    KNX occupancy sensor
    KNX occupancy sensor for presence-based LED control.
    KNX physical address
    Unique physical address of the KNX-LED device in the network.
    KNX power supply 640 mA
    KNX bus power supply from 640 mA for lines with many LED devices.
    KNX presence detector
    KNX presence detector for environments with LED lighting.
    KNX programming
    Programming of the KNX system for controlling LEDs with ETS software.
    KNX push-button interface
    KNX interface for traditional buttons controlling LEDs.
    KNX scene actuator
    KNX actuator for storing and recalling LED scenes.
    KNX scene module
    KNX module for storing and recalling lighting scenes.
    KNX sensor
    KNX sensor (presence, light, temperature) for LED automation.
    KNX staircase timer
    KNX staircase timer for timed LED lighting in stairwells.
    KNX switch actuator 4 fold
    4-channel KNX switching actuator for LED groups.
    KNX switching actuator
    KNX actuator for switching on/off LED circuits.
    KNX timer
    KNX timer for time-based programming of LED lighting.
    KNX topology
    Topology of the KNX network: line, area, backbone for LED control.
    KNX universal dimmer
    Universal KNX dimmer compatible with LED drivers, halogens, and fluorescents.
    KNX USB interface
    KNX-USB interface for programming the system from a PC.
    KNX visualization
    Software for visualization and graphical control of the KNX LED system.
    KNX weather station
    KNX weather station for automatic control of outdoor LED lighting.
    KNX-DALI gateway
    Interface connecting the KNX bus to DALI drivers for integrated control of LED lighting. ↑ Back to top

    L

    L-bracket
    L-bracket for corner mounting of LED profiles.
    L-bracket mount
    Mounting with L-bracket for corner LED profiles.
    L-shaped connector
    L-connector for 90-degree bends between LED strips.
    L-shaped profile
    LED profile with L cross-section for installation in interior angles.
    L50
    LED useful lifetime: hours at which the flux drops to 50% of the initial.
    L70 / L80 / L90
    LED lifetime standards; indicate the operating hours at which the flux drops to 70%, 80%, or 90% of the initial.
    L-bracket for wall
    L-shaped bracket for wall-mounting the LED profile.
    Lab color space
    CIE L*a*b* color space for measuring perceptible color differences between LEDs.
    Lab sample
    Laboratory sample for verifying LED performance before production.
    Lab testing
    Laboratory tests on the performance of LED products.
    Label (label)
    Identification label with technical specifications applied to strips and LED power supplies.
    Label energy LED
    Label with the energy class of the LED fixture.
    Label of the product LED
    Label with technical data applied on the LED strip or on the power supply.
    Label printer LED
    UV LED for curing labels in industrial printers.
    Laboratory analysis LED
    LED lighting for analysis laboratories; high CRI and uniformity.
    Laboratory chimico LED
    LED lighting for chemical laboratories; resistant and safe.
    Laboratory fotografico LED
    LED lighting for photographic laboratories; controlled spectrum.
    Laboratory LED lighting
    LED lighting for laboratories; high CRI and uniformity.
    Labyrinth seal
    Labyrinth gasket for IP protection without contact; for LED profiles.
    Lace mount
    Decorative mounting with weaving fixing for LED fixtures.
    Lacquer finish
    Lacquer finish on LED profiles for custom colors and gloss.
    Lacuna (semiconductor)
    Positive charge carrier in the semiconductor LED; complement of the electron.
    Ladder cable tray
    Ladder-type cable tray for LED cables.
    Ladder diagram
    Ladder diagram for programming PLCs that control industrial LED installations.
    Ladder mount
    Mounting of LED profiles on ladder or truss structures.
    Lag bolt
    Lag bolt for fixing LED brackets on solid wood.
    Lambertian emitter
    Source emitting with a cosine distribution; the bare LED is almost Lambertian.
    Lamella anti-glare
    Internal fin in the profile that blocks direct view of the LED strip, reducing glare.
    Laminated glass LED
    Laminated glass with integrated LED strip for architectural design.
    Lamp dceiling-mounted LED
    LED ceiling light for general ceiling-mounted lighting.
    Lamp dwall-mounted LED
    Wall-mounted LED sconce for decorative and functional lighting.
    Lamp from lettura LED
    Focused and dimmable LED light for reading.
    Lamp from tavolo LED
    Desk LED lamp for visual task lighting.
    Lamp from terra LED
    Floor-standing LED lamp for ambient and reading lighting.
    Lamp holder
    Lamp holder; not related to LED strips but present in hybrid fixtures.
    Lamp post LED
    LED street light for road and pedestrian lighting.
    Lamp shade LED
    Lampshade with LED source for atmospheric lighting.
    Lamp suspended LED
    Suspended LED fixture for table and counter lighting.
    Lampholder adapter
    Adapter for mounting LED modules in existing lamp holders.
    Land (PCB)
    Copper pad on the LED strip PCB for soldering components.
    Landing light
    LED lighting of the stair landing; motion sensor.
    Landing lighting LED
    LED lighting for landings and stairwell areas.
    Landscape bollard
    LED bollard for landscape and garden path lighting.
    Landscape fixture
    LED fixture for landscape and green space lighting.
    Landscape lighting
    LED lighting for gardens, parks, and green spaces.
    Landscaping LED design
    Design of LED lighting for the outdoor landscape.
    Lane marking LED
    Luminous LED signage for lane delineation.
    Lantern LED
    Decorative LED lantern for outdoor and indoor use; classic or modern style.
    Lap joint
    Overlap joint between two LED profiles.
    Laptop LED backlight
    Backlighting for laptop computer screens.
    Large area LED
    LED lighting for large areas: warehouses, storage, stadiums.
    Large format LED
    LED display or installation of large dimensions for facades and events.
    Large format profile
    Large-dimension LED profile for architectural installations.
    Large scale installation
    Large-scale LED installation with hundreds of fixtures.
    Laser
    Coherent light source; some hybrid LED-laser technologies are used in high-performance lighting.
    Laser alignment
    Laser alignment for precise positioning of LED profiles.
    Laser cut (profile)
    Precision cutting of the aluminum profile via laser.
    Laser diode
    Laser diode; parallel technology to LEDs for high focal power applications.
    Laser engraving
    Laser engraving on the LED profile for customization and branding.
    Laser level
    Laser level for alignment of LED profiles during installation.
    Laser measurement
    Laser measurement of distances for the LED project.
    Last mile (wiring)
    Last segment of cable between the electrical panel and the LED light point.
    Last mile cabling
    Wiring of the last segment between the panel and the LED light point.
    Last mile connection
    Last connection between the panel and the LED fixture.
    Latch (fermo)
    Snap-lock mechanism securing the diffuser in the LED profile, preventing accidental disassembly.
    Latch mechanism
    Locking mechanism of the diffuser in the LED profile.
    Latch release
    Quick release mechanism of the diffuser from the LED profile.
    Latching relay
    Bistable relay that maintains state without power; for LEDs.
    Late payment penalty
    Penalty for late payment of the LED supply.
    Latenza
    Time delay in the response of an LED system to a command; critical in wireless protocols.
    Lateral chromatic aberration
    Lateral shift of the image at different wavelengths in an LED lens.
    Lateral emission
    Lateral light emission from the LED strip; with side-emitting chip.
    Lateral light distribution
    Lateral light distribution of the LED fixture.
    Lattice mount
    Mounting on grid or truss for LED fixtures.
    Lattice structure
    Lattice structure of the LED semiconductor crystal.
    Launch angle
    Initial emission angle of the photon from the LED die.
    Laundry room LED
    LED lighting for laundry rooms; resistant to humidity.
    Lay-in fixture
    LED fixture resting in the suspended ceiling grid.
    Layer stack-up (PCB)
    Composition of the layers of the multilayer LED strip PCB.
    Layered diffuser
    Multilayer diffuser for advanced control of light distribution.
    Layered lighting
    Layered design: ambient + task + accent for complete environments.
    Layout drawing
    Plan drawing with the arrangement of LED fixtures in the project.
    Layout libero
    Arrangement of LED fixtures in non-regular shapes.
    Layout of the LED system
    Plan layout of all LED light points in the project.
    Layout optimization
    Optimization of the LED layout for uniformity and energy saving.
    Layout plan
    Plan of the LED lighting layout in the architectural project.
    Layout to file
    Arrangement of LED fixtures in parallel rows.
    Layout to maglia
    Arrangement of LED fixtures in a regular grid.
    Layout to perimeter
    Arrangement of LED fixtures along the perimeter of the environment.
    LCD backlight
    Backlighting for liquid crystal displays.
    LCD display (controller)
    Liquid crystal display on the LED controller for parameter visualization.
    Lead time
    Delivery time from order confirmation to shipment of the LED product.
    Lead wire
    Wire conductor connected to the LED strip for power supply.
    Lead-free solder
    Lead-free solder (RoHS); standard for modern LED strips.
    Leader cable
    Guide cable for installing LED strips in difficult spaces.
    Leadership in the sector LED
    Dominant market position of the manufacturer in LED technology.
    Leading edge (dimming)
    See "Dimmer leading edge". Rising phase cutting for brightness adjustment.
    Leakage current
    Leakage current; limited for safety by LED driver standards.
    Leakage flux
    Dispersed luminous flux that does not contribute to useful lighting.
    Lean manufacturing
    Lean manufacturing applied to the production of LED components.
    Lean manufacturing LED
    Lean production of LED components for efficiency and quality.
    Learning mode (sensor)
    Learning mode of the sensor for calibrating LED parameters.
    Lease (noleggio LED)
    Business model with operational leasing of LED installations.
    Lease agreement LED
    Leasing contract for professional LED installations.
    Leasing LED
    Operational leasing of LED installations with periodic subscription.
    Lecture hall LED
    LED lighting for university lecture halls; scenarios for lectures and projection.
    LED (Light Emitting Diode)
    Light emitting diode; semiconductor component that emits light with current flow.
    LED addressable (indirizzabile)
    LED strip in which every LED or group of LEDs has an individual digital address for dynamic effects (WS2812, SK6812).
    LED amber (ambra)
    590-600 nm LED; for warm lighting and signage.
    LED array configuration
    Configuration of the arrangement of LEDs on the strip or in the module.
    LED array module
    Module with LED arrangement in a matrix for high power.
    LED as investment
    LED lighting viewed as an investment with economic return.
    LED assembly
    Complete assembly of strip, profile, diffuser, and accessories ready for installation.
    LED assembly line
    Assembly line for LED strip production.
    LED backlight unit (Blue)
    Backlighting unit for displays and panels.
    LED bar decorative
    Rigid LED bar for decorative lighting of furniture and shelves.
    LED bar for acquario dolce
    LED bar with spectrum for freshwater plants and fish.
    LED bar for acquario marino
    LED bar with specific spectrum for corals and marine organisms.
    LED bar for mirror
    Rigid LED bar for perimeter lighting of mirrors.
    LED bar for scaffale
    Rigid LED bar for lighting shelves and racks.
    LED bar for shop window
    Rigid LED bar for internal lighting of showcases.
    LED bar functional
    Rigid LED bar for task lighting of counters and work surfaces.
    LED bar rigid
    LED strip mounted on a rigid aluminum PCB instead of flexible; for fixed linear applications.
    LED beam angle
    Opening angle of an LED light beam; typically 120 degrees for strips.
    LED binning report
    Manufacturer's document reporting the binning data of the supplied LED chip batch.
    LED blue
    450-475 nm LED; basis for white LEDs via phosphors.
    LED board
    LED board; PCB with mounted chips ready for insertion in fixture.
    LED catalog
    Catalog of the manufacturer's LED products with specifications and codes.
    LED ceiling light
    LED ceiling light for general ceiling-mounted lighting.
    LED ceiling light for bathroom
    IP44 LED ceiling fixture for bathroom lighting.
    LED ceiling light for kitchen
    LED ceiling fixture for general kitchen lighting.
    LED ceiling light for living-room
    Dimmable LED ceiling fixture for the living room.
    LED certification body
    Authorized certification body for LED products.
    LED chandelier
    Chandelier with LED sources; classic or contemporary design.
    LED chip
    Semiconductor component that emits light when current flows; the core of the LED source.
    LED chip manufacturer
    LED chip manufacturer: Samsung, Nichia, Cree, Osram, Bridgelux, Lumileds, Seoul.
    LED circuit design
    Design of the electrical circuit for LED strips and modules.
    LED cluster
    Closely spaced group of LEDs for high luminous density.
    LED color sorting
    Selection and classification of LED chips by color during production.
    LED color wheel
    Color wheel in the LED app for visual shade selection.
    LED compatibility list
    List of compatibility between dimmer and LED driver verified by the manufacturer.
    LED controller
    Electronic device that manages color, intensity, and effects of the LED strip (PWM, DMX, Wi-Fi, Zigbee).
    LED controller app
    Mobile application for managing smart LED systems.
    LED controller pixel
    Controller dedicated to driving addressable LED strips pixel by pixel.
    LED conversion
    Conversion of a traditional system to LED technology.
    LED conversion factor
    Conversion factor for calculating the LED equivalent of traditional sources.
    LED cooling system
    Cooling system designed for high-power LEDs.
    LED cost analysis
    Analysis of LED lighting costs: purchase, installation, operation.
    LED cost comparison
    Comparison of costs between LED lighting and traditional sources.
    LED Cree
    US brand of high-efficiency and reliable LED chips for professional applications.
    LED current regulator
    Regulator that maintains constant current through the LED.
    LED data management
    Management of technical and performance data of LED products.
    LED datasheet
    Datasheet with all the specifications of the LED product.
    LED deep red
    Deep red LED (660 nm); used in LED horticulture.
    LED degradation model
    Mathematical model for predicting the degradation of LED performance over time.
    LED design guide
    Guide to the design of LED lighting systems.
    LED design guideline
    Guidelines for the design of LED installations.
    LED desk lamp
    LED desk lamp for work surface lighting.
    LED die
    See Die. Semiconductor crystal emitting light.
    LED diffuser sheet
    Diffuser sheet applicable on surfaces to uniform LED light.
    LED dimming curves
    Curves describing the relationship between control signal and perceived brightness.
    LED display panel
    Display panel composed of LED matrices for video and advertising.
    LED disposal regulation
    Regulation on the disposal of LED products at end of life (WEEE).
    LED driver
    Synonym of LED power supply; device that regulates current and voltage for optimal LED operation.
    LED driver compatibility list
    List of compatibility between LED driver and dimmers of different brands.
    LED driver datasheet
    Complete datasheet of the LED driver with all parameters.
    LED driver efficiency curves
    Efficiency curves of the LED driver as a function of load.
    LED driver IC
    Integrated circuit specific for driving LEDs.
    LED driver input specification
    Input specifications of the LED driver: voltage, frequency, current.
    LED driver noise level
    Acoustic noise level of the LED driver; in dB.
    LED driver output specification
    Output specifications of the LED driver: voltage, current, power.
    LED driver protection features
    Protection functions of the LED driver: OCP, OVP, SCP, OTP.
    LED driver selection guide
    Guide to choosing the LED driver based on the application.
    LED driver sizing
    Sizing of the LED driver based on the load and safety margin.
    LED driver thermal management
    Thermal management of the LED driver to ensure long duration.
    LED ecosystem
    Ecosystem of compatible LED products: strips, profiles, drivers, controllers, accessories.
    LED education
    Training and professional updating on LED technology.
    LED efficiency benchmark
    Efficiency benchmark for comparing different LED products.
    LED efficiency record
    Record of LED luminous efficacy achieved in the laboratory; beyond 300 lm/W.
    LED emergency standard
    Standard for emergency LED lighting: EN 1838.
    LED enclosure rating
    Classification of the LED product enclosure for environmental protection.
    LED energy audit
    Specific energy audit for the LED lighting of the building.
    LED energy calculator
    Online calculator of LED consumption and energy savings.
    LED energy monitoring
    Continuous monitoring of the consumption of the LED system.
    LED energy saving calculator
    Tool for calculating the energy savings of switching to LED.
    LED environmental impact
    Environmental impact of LED lighting throughout its life cycle.
    LED exhibition
    Trade fair specialized in LED lighting: Light + Building, PLDC, LuxLive.
    LED failure mode
    Failure mode of the LED: open circuit, short circuit, degradation.
    LED far red
    Far infrared LED (730 nm); for grow lighting.
    LED filament
    LED filament replicating the aesthetics of incandescent lamps.
    LED filament vintage
    LED lamp mimicking the aesthetics of the Edison filament; not a strip.
    LED fixture manufacturer
    Manufacturer of LED lighting fixtures.
    LED flicker meter
    Instrument measuring the flicker of LED light according to IEC TR 61547-1.
    LED flood lamp
    LED projector with wide beam for outdoor area lighting.
    LED floor lamp
    Floor-standing LED lamp.
    LED flux maintenance
    Maintenance of LED luminous flux over time; L70, L80, L90.
    LED for acquario
    LED with specific spectrum for aquariums: plants, corals, fish.
    LED for architecture
    LED lighting as a design tool for architecture.
    LED for automation
    LED lighting integrated into building automation systems.
    LED for bathroom
    LED lighting for bathroom environments with IP protection.
    LED for coltivazione
    LED for grow light with PAR spectrum optimized for photosynthesis.
    LED for comfort
    LED lighting as a tool for visual wellness.
    LED for corridor
    LED lighting for corridors with sensors and uniformity.
    LED for design
    LED lighting as a design element in the environment.
    LED for design of indoor
    LED lighting as a key element of interior design projects.
    LED for efficiency
    LED lighting as a tool for energy savings.
    LED for energy efficiency
    LED lighting to reduce the building's energy consumption.
    LED for every environment
    Range of LED products suitable for any type of environment.
    LED for every esigenza
    Variety of LED solutions to meet any lighting design requirement.
    LED for furniture
    LED strips integrated into furniture and furnishings.
    LED for garden
    LED lighting for gardens and outdoor green spaces.
    LED for house
    Residential LED lighting for all domestic environments.
    LED for industry
    LED lighting for factories and industrial warehouses.
    LED for lighting general
    LED for the base lighting level of an environment.
    LED for lighting task
    LED focused on the visual task: reading, work, kitchen.
    LED for living-room
    LED lighting for living rooms with layered scenarios.
    LED for new construction
    LED lighting designed during the building construction phase.
    LED for restaurant
    LED lighting for restaurants with atmosphere and dimming.
    LED for ristrutturazione
    LED lighting for building renovation interventions.
    LED for room from letto
    LED lighting for the bedroom with warm CCT and dimming.
    LED for scale
    LED lighting for stairs with strip on steps or handrail.
    LED for shop
    LED lighting for retail points of sale with high CRI.
    LED for terrario
    LED with spectrum for reptiles and amphibians in terrariums.
    LED for the futuro
    LED technology constantly evolving towards greater efficiency.
    LED for office
    LED lighting for offices compliant with EN 12464-1.
    LED for wellness
    HCL and chromotherapy LED lighting for wellness.
    LED garden light
    LED fixture for lighting gardens and green spaces.
    LED globe lamp
    Globe-shaped LED lamp for decorative lighting.
    LED green
    520-535 nm LED; component of the RGB system.
    LED grow full spectrum
    LED for cultivation with a complete spectrum optimized for all phases.
    LED grow light blue
    LED for the vegetative phase of plants; 440-460 nm.
    LED grow light red
    LED for the flowering phase of plants; 620-670 nm.
    LED grow panel
    LED panel for indoor plant cultivation.
    LED HE (High Efficiency)
    Chip optimized for maximum luminous efficacy (lm/W).
    LED heat generation rate
    Speed of heat generation in the LED chip.
    LED heat map
    Thermal map of the temperature distribution on an LED strip.
    LED heatsink design
    Design of the thermal heat sink for high-power LEDs.
    LED high bay
    Suspended high-bay industrial fixture with high-power LED sources.
    LED high bay fixture
    High-bay LED for industrial lighting with high ceilings.
    LED HP (High Power)
    Chip optimized for maximum luminous power per unit.
    LED indicator
    Low-power signaling LED; for the status of electronic equipment.
    LED industry standard
    Industry standard for interoperability and quality of LEDs.
    LED infrarosso
    Above 700 nm LED; for night vision, sensors, and remote controls.
    LED innovation
    Technological innovation in LED lighting: efficiency, spectrum, control.
    LED installation best practice
    Best practices for professional installation of LED systems.
    LED integration architecture
    Integration of LED lighting into the building's architecture.
    LED junction
    p-n junction of the semiconductor that emits light.
    LED lamp
    LED source with standardized base (E27, GU10, etc.) for direct replacement of traditional lamps.
    LED lamp base
    Base or cap of the LED lamp; various standards (E27, E14, GU10, G9).
    LED lamp cap
    Cap of the LED lamp; different standards (E27, GU10, G9, etc.).
    LED lifetime prediction
    Estimate of the useful lifetime based on LM-80 tests and TM-21 projection.
    LED light bar
    Rigid LED light bar for linear and backlighting applications.
    LED light controller
    Device for controlling LED lighting.
    LED light engine
    Complete LED module with chip, driver, and integrated optics.
    LED light source
    Light source based on LED; the core of any LED lighting system.
    LED light strip kit
    Complete kit with strip, power supply, and controller ready for installation.
    LED lighting audit
    Technical verification of the existing LED system for optimization.
    LED lighting calculator
    Tool for calculating illuminance and the number of LED fixtures.
    LED lighting consultant
    Consultant specialized in professional LED lighting.
    LED lighting control system
    Complete system for managing LED lighting.
    LED lighting decorative
    LED strip for aesthetic and atmospheric effects in the environment.
    LED lighting efficace
    LED system with high luminous efficacy and good distribution.
    LED lighting flexible
    LED strip on flexible substrate for curved surfaces.
    LED lighting for outdoor
    LED systems with IP protection for gardens, facades, and pathways.
    LED lighting for furniture
    LED strips integrated into furniture, bookcases, and furnishings.
    LED lighting for indoor
    LED systems for indoor residential and commercial environments.
    LED lighting for kitchen
    Complete LED system for the kitchen: under-cabinet, island, hood.
    LED lighting for office
    LED system for offices: low UGR, 500 lux, dimmable.
    LED lighting industry
    LED lighting industry; in constant growth and innovation.
    LED lighting integrated
    LED incorporated into the architecture as an integral part of the design.
    LED lighting market
    LED lighting market; dominates the sector with over 80% of sales.
    LED lighting minimal
    LED system with ultra-slim profiles and essential lines.
    LED lighting hidden
    LED strip completely hidden on the surface; only light visible.
    LED lighting newsletter
    Specialized newsletter on LED lighting news.
    LED lighting of design
    LED fixtures with refined design as furnishings.
    LED lighting of service
    Functional LED for technical and service areas.
    LED lighting professional
    Professional quality LED products for installers and designers.
    LED lighting project
    LED lighting project from design to installation.
    LED lighting recessed invisible
    Recessed and plastered LED profile; invisible when LED is off.
    LED lighting regulation
    Regulations applicable to LED lighting.
    LED lighting residential
    LED systems for private homes; comfort and atmosphere.
    LED lighting retrofit
    Replacement of existing lighting with LED technology.
    LED lighting seminar
    Training seminar on LED design and installation.
    LED lighting show
    LED lighting fair with exhibition of products and solutions.
    LED lighting smart
    Connected and remotely controllable LED system with app and voice.
    LED lighting software
    Software dedicated to the design and simulation of LED lighting.
    LED lighting sustainable
    LED products designed to minimize environmental impact.
    LED lighting specification
    Technical specification of LED lighting for a project.
    LED lighting standard
    Technical standards applicable to LED lighting.
    LED lighting sustainability
    Sustainability of LED lighting: energy, materials, recycling.
    LED lighting technology
    LED lighting technology: chips, phosphors, drivers, optics.
    LED lighting terminology
    Technical terminology of LED lighting; this glossary.
    LED lighting to battery
    Portable LED system powered by rechargeable battery.
    LED lighting to low consumption
    Strips and LED fixtures optimized for minimum energy consumption.
    LED lighting to scomparsa
    Completely hidden LED system that reveals itself only when the light is on.
    LED lighting training course
    Training course on LED lighting for professionals.
    LED lighting trend
    Current trend in LED lighting: linear, smart, circadian, COB.
    LED lighting workshop
    Practical workshop on installing and configuring LED systems.
    LED lime
    LED between green and yellow; for expanding the chromatic gamut.
    LED linear
    Arrangement of LEDs in a continuous line; typical of strips and rigid bars.
    LED lumen output
    Total luminous flux emitted by the LED system.
    LED lumen output calculator
    Tool for calculating the total luminous flux of the LED system.
    LED luminaire classification
    Classification of LED fixtures by type and application.
    LED luminaire datasheet
    Complete datasheet of the LED fixture.
    LED luminaire design
    Design of the LED fixture: source, driver, optics, enclosure.
    LED luminaire test
    Compliance and performance test on complete LED fixtures.
    LED manufacturer
    Manufacturer of LED components or systems.
    LED market analysis
    Analysis of the LED lighting sector market.
    LED market share
    Market share of LED lighting on the total of light sources.
    LED matrix
    Matrix of LEDs arranged in rows and columns for displays or effects.
    LED mid-power
    Mid-power LED (0.2-0.5W per chip); the most common type in professional LED strips (e.g., 2835, 3528).
    LED module
    Small board with one or more LEDs and integrated optics; used for signs, backlighting, and point lighting.
    LED module assembly
    Assembly of the LED module with chip, PCB, and optics.
    LED module connector
    Connector for connecting interchangeable LED modules.
    LED module datasheet
    Datasheet of the LED module with performance specifications.
    LED module design
    Design of the LED module for specific applications.
    LED module efficiency
    Efficacy of the complete LED module including PCB and interconnection losses.
    LED module testing
    Testing of the LED module: photometric, electrical, thermal.
    LED mounting surface
    Mounting surface prepared for the LED profile.
    LED neon flex
    Flexible silicone tube encasing an LED strip to simulate the appearance of traditional neon tubes.
    LED neon rope
    Flexible LED light cord simulating traditional neon.
    LED Nichia
    Japanese manufacturer of high-quality LED chips, pioneer in white LED technology.
    LED of new generation
    LED chips with efficiency and performance superior to previous versions.
    LED of quality professional
    LED products with specifications and reliability for professional use.
    LED on/off cycle
    On/off switching cycle; LEDs tolerate millions of cycles without degradation.
    LED Osram
    German manufacturer of LED chips and professional lighting solutions.
    LED output stability
    Stability of LED luminous flux over time and with temperature changes.
    LED package substrate
    Substrate of the LED package that supports the die and dissipates heat.
    LED package type
    Classification of the LED chip enclosure: SMD, COB, CSP, high-power.
    LED panel
    Flat fixture with LEDs distributed on a surface for uniform ceiling or wall lighting.
    LED panel light
    Flat panel with LEDs for uniform ceiling-mounted lighting.
    LED par lamp
    PAR (Parabolic Aluminized Reflector) LED lamp for accent lighting.
    LED payback calculator
    Calculator for the payback time of the LED investment.
    LED pendant fixture
    Suspended LED fixture from the ceiling; for direct or mixed lighting.
    LED performance data
    Measured performance data of the LED product.
    LED performance monitoring
    Monitoring of LED system performance over time.
    LED performance test
    Photometric, electrical, and thermal performance test of an LED product.
    LED phosphor plate
    Remote phosphor plate positioned at a distance from the LED chip.
    LED photometric data
    Measured photometric data of the LED fixture for simulation.
    LED photometric file
    .ies or .ldt file with the photometric data of an LED fixture.
    LED pixel
    Individually addressable LED that can assume any color; used for displays and LED matrices.
    LED power calculator
    Calculator for the total power of the LED system.
    LED power supply design
    Design of the power supply specific to the LED load.
    LED power supply integrated
    Power supply integrated into the LED profile or fixture.
    LED product catalog
    Complete catalog of the manufacturer's LED products.
    LED product certification
    Compliance certification of the LED product to standards.
    LED product database
    Database of LED products with technical specifications for the project.
    LED product lifecycle
    Life cycle of the LED product: development, production, sale, end of life.
    LED product line
    Line of LED products with common characteristics.
    LED product portfolio
    Complete portfolio of a manufacturer's LED products.
    LED product range
    Range of LED products available for different applications.
    LED product selector
    Tool for selecting the LED product suitable for the application.
    LED product specification
    Detailed technical specification of the LED product.
    LED product warranty
    Warranty of the LED product provided by the manufacturer.
    LED profile
    Extruded aluminum bar that houses the LED strip and the diffuser; ensures dissipation, protection, and aesthetic finish.
    LED profile for bathroom
    Profile with IP protection for LED lighting of the bathroom.
    LED profile for corridor
    LED profile for continuous lighting of corridors and hallways.
    LED profile for indoor
    Standard LED profile for installations in dry indoor environments.
    LED profile for kitchen
    LED profile for under-cabinet and task lighting in the kitchen.
    LED profile for living-room
    LED profile for indirect and atmospheric lighting in the living room.
    LED profile for outdoor
    LED profile with IP protection for outdoor installations.
    LED profile for room
    Slim LED profile for the lighting of the bedroom.
    LED profile for shop
    LED profile for lighting displays and shelves in retail.
    LED profile for office
    Suspended or recessed LED profile for efficient office lighting.
    LED project budget
    Budget of the LED lighting project.
    LED project documentation
    Complete documentation of the LED lighting project.
    LED project management
    Management of the LED lighting project.
    LED project planning
    Planning of the LED project: timelines, resources, budget.
    LED project scope
    Scope of the LED lighting project: environments, objectives, requirements.
    LED project specification
    Specification of the LED lighting project.
    LED project timeline
    Timeline of the LED project with milestones and deliveries.
    LED recessed light
    Recessed LED fixture for ceiling or wall.
    LED reliability test
    Long-term reliability test on LED components and systems.
    LED replacement
    Direct replacement of traditional sources with equivalent LEDs.
    LED retrofit kit
    Kit for converting traditional fixtures to LED.
    LED retrofit lamp
    LED lamp designed to directly replace a traditional lamp.
    LED Samsung
    Samsung's LED division, producing high-efficiency chips for professional strips.
    LED sensor integration
    Integration of sensors into the LED fixture for automatic control.
    LED Seoul Semiconductor
    Korean manufacturer known for SunLike technology with a spectrum similar to sunlight.
    LED signage
    Signs and illuminated signs made with LED technology.
    LED smart bulb
    Smart LED lamp with Wi-Fi or Zigbee connectivity.
    LED solar light
    LED fixture powered by an integrated solar panel.
    LED specification sheet
    Card with the detailed specifications of an LED product.
    LED spectral data
    Complete spectral data of an LED; provided by the chip manufacturer.
    LED spotlight
    LED spotlight for accent lighting with a concentrated beam.
    LED spotlight on track
    LED spotlight mounted on an electrified track for adjustable lighting.
    LED step light
    LED light for steps and stairs; safety and decoration.
    LED street light
    LED fixture for street lighting.
    LED strip
    Flexible printed circuit (FPCB) with surface-mounted SMD LEDs, adhesive on the back; the basic component of linear lighting.
    LED strip 120 LED/m
    LED strip with a density of 120 LED chips per meter.
    LED strip 12V
    Strip powered at 12V DC; shorter cutting segments but more subject to voltage drop.
    LED strip 12V specification
    Complete technical specifications of the LED strip powered at {v} DC.
    LED strip 14.4 W/m
    LED strip with a consumption of 14.4 Watts per linear meter.
    LED strip 180 LED/m
    LED strip with a density of 180 LED chips per meter.
    LED strip 19.2 W/m
    LED strip with a consumption of 19.2 Watts per linear meter.
    LED strip 2200K
    LED strip with a fixed color temperature of 2200K.
    LED strip 230V
    Strip powered directly by the mains voltage with a rectifier; for very long outdoor linear installations.
    LED strip 24 W/m
    LED strip with a consumption of 24 Watts per linear meter.
    LED strip 240 LED/m
    LED strip with a density of 240 LED chips per meter.
    LED strip 2400K
    LED strip with a fixed color temperature of 2400K.
    LED strip 24V
    Strip powered at 24V DC; the best compromise between cuttability and maximum connectable length.
    LED strip 24V specification
    Complete technical specifications of the LED strip powered at {v} DC.
    LED strip 2700K
    LED strip with a fixed color temperature of 2700K.
    LED strip 28.8 W/m
    LED strip with a consumption of 28.8 Watts per linear meter.
    LED strip 30 LED/m
    LED strip with a density of 30 LED chips per meter.
    LED strip 3000K
    LED strip with a fixed color temperature of 3000K.
    LED strip 3500K
    LED strip with a fixed color temperature of 3500K.
    LED strip 352 LED/m
    LED strip with a density of 352 LED chips per meter.
    LED strip 36 W/m
    LED strip with a consumption of 36 Watts per linear meter.
    LED strip 4.8 W/m
    LED strip with a consumption of 4.8 Watts per linear meter.
    LED strip 4000K
    LED strip with a fixed color temperature of 4000K.
    LED strip 4500K
    LED strip with a fixed color temperature of 4500K.
    LED strip 48 W/m
    LED strip with a consumption of 48 Watts per linear meter.
    LED strip 480 LED/m
    LED strip with a density of 480 LED chips per meter.
    LED strip 48V
    Strip powered at 48V DC; allows very long runs with minimal voltage drop.
    LED strip 48V specification
    Complete technical specifications of the LED strip powered at {v} DC.
    LED strip 5000K
    LED strip with a fixed color temperature of 5000K.
    LED strip 512 LED/m
    LED strip with a density of 512 LED chips per meter.
    LED strip 5700K
    LED strip with a fixed color temperature of 5700K.
    LED strip 5V
    5V DC strip; for addressable (WS2812B) and USB.
    LED strip 5V specification
    Complete technical specifications of the LED strip powered at {v} DC.
    LED strip 60 LED/m
    LED strip with a density of 60 LED chips per meter.
    LED strip 6500K
    LED strip with a fixed color temperature of 6500K.
    LED strip 700 LED/m
    LED strip with a density of 700 LED chips per meter.
    LED strip 9.6 W/m
    LED strip with a consumption of 9.6 Watts per linear meter.
    LED strip 90 LED/m
    LED strip with a density of 90 LED chips per meter.
    LED strip biadesiva
    Strip with adhesive tape already applied for direct mounting.
    LED strip catalog
    List of all available LED strips with specifications and prices.
    LED strip COB
    Strip with LED chips mounted at minimum distance without visible points; produces a continuous and uniform line of light.
    LED strip compatible profile
    LED strip with dimensions and characteristics suitable for the chosen profile.
    LED strip cutter
    Tool for precise cutting of the LED strip at designated points.
    LED strip double fila
    LED strip with two parallel rows of chips for doubled flux.
    LED strip economica
    Base-level LED strip for non-critical decorative applications.
    LED strip flexible
    LED strip on a flexible substrate that adapts to curved surfaces.
    LED strip for applications professional
    High-quality LED strip for professional installations.
    LED strip for backlighting
    LED strip for backlighting panels and displays.
    LED strip for cove
    LED strip for indirect lighting in architectural coves.
    LED strip for cove ceiling-mounted
    LED strip specifically for indirect lighting in ceiling coves.
    LED strip for direct lighting
    Directly visible LED strip; requires COB or high density.
    LED strip for edge mobile
    LED strip for lighting the edge of furniture and shelves.
    LED strip for false ceiling
    LED strip specifically for integration into suspended ceilings.
    LED strip for indirect lighting
    LED strip directed towards the ceiling or wall for diffused light.
    LED strip for indoor
    IP20 LED strip for installation in dry indoor environments.
    LED strip for mobili
    LED strip specifically for interior and exterior lighting of furniture.
    LED strip for niche
    LED strip for accent lighting in niches.
    LED strip for outdoor
    LED strip with IP65 or higher protection for outdoor installation.
    LED strip for professionisti
    Professional quality LED strip for installers and lighting designers.
    LED strip for retro TV
    LED strip for bias lighting behind the television.
    LED strip for scale
    LED strip for lighting the steps of stairs and staircases.
    LED strip for specchi
    LED strip for perimeter or rear lighting of mirrors.
    LED strip for under letto
    LED strip for low-level nighttime courtesy lighting under the bed.
    LED strip for veletta
    LED strip for indirect lighting in the cove of the suspended ceiling.
    LED strip for vetrine
    LED strip for internal lighting of display windows.
    LED strip high power
    LED strip with consumption above 19.2 W/m for primary lighting.
    LED strip holder
    Support that holds the LED strip in position in the profile.
    LED strip IP20
    Strip without protection; only for dry indoor use.
    LED strip IP65
    Strip with silicone coating on the upper surface; protected from dust and water jets.
    LED strip IP67
    Strip completely encapsulated in a silicone sheath; protected from dust and temporary immersion.
    LED strip IP68
    Strip with hermetic encapsulation for permanent immersion; suitable for swimming pools and fountains.
    LED strip low power
    LED strip with consumption below 5 W/m for decorative lighting.
    LED strip made in Italy
    LED strip produced in Italy with local quality control.
    LED strip media power
    LED strip with consumption between 9.6 and 14.4 W/m for general lighting.
    LED strip of quality
    Professional LED strip with branded LED chips, tight binning, and copper PCB.
    LED strip on measures
    LED strip cut to the exact length required by the project.
    LED strip pitch
    Distance between consecutive LEDs on the strip; influences uniformity.
    LED strip professional
    High-end LED strip for professional and architectural installations.
    LED strip reel
    Roll of LED strip; standard packaging of 5 or 10 meters.
    LED strip RGBA
    Strip with red, green, blue, and amber LEDs for an extended gamut.
    LED strip single fila
    LED strip with a single row of chips; standard configuration.
    LED strip soldering guide
    Guide for professional soldering of LED strip contacts.
    LED strip tagliabile
    LED strip with predefined cutting points for customization.
    LED strip test
    Functional verification of the LED strip before installation.
    LED strip to cool light
    LED strip with cool CCT (5500-6500K) for technical environments.
    LED strip to high color rendering
    LED strip with CRI above 90 for color fidelity.
    LED strip to high efficiency
    LED strip with efficacy above 160 lm/W.
    LED strip to light neutra
    LED strip with neutral CCT (4000-4500K) for multifunctional environments.
    LED strip to warm light
    LED strip with warm CCT (2200-3500K) for residential environments.
    LED strip to the metro
    Sale of LED strips priced per linear meter.
    LED strip ultra thin
    LED strip with reduced PCB thickness for minimal installations.
    LED strip width
    Width of the LED strip: 5, 8, 10, 12, 15 mm; determines compatibility with the profile.
    LED strip with chip Bridgelux
    LED strip with high-efficiency Bridgelux LED chips.
    LED strip with chip Cree
    LED strip with high-efficiency Cree LED chips.
    LED strip with chip Lumileds
    LED strip with Luxeon chips from Lumileds for professional performance.
    LED strip with chip Nichia
    LED strip with high-reliability Nichia LED chips.
    LED strip with chip Osram
    LED strip with German-quality Osram LED chips.
    LED strip with chip Samsung
    LED strip with high-efficiency Samsung LED chips.
    LED strip with chip Seoul
    LED strip with Seoul Semiconductor SunLike chips for a natural spectrum.
    LED strip with warranty
    LED strip with manufacturer's warranty on performance and duration.
    LED surface mount
    Surface-level mounting of the LED profile; applied directly to the surface.
    LED system autonomo
    LED system with solar panel and battery; independent from the grid.
    LED system centralized
    LED system managed from a central controller for the entire building.
    LED system chiavi in mano
    Complete solution from design to delivery of the LED system.
    LED system complete
    LED system with all components: strips, profiles, drivers, controllers.
    LED system decentralizzato
    LED system with local controllers independent for each zone.
    LED system design
    Complete design of the LED system: source, driver, optics, thermal, control.
    LED system domotico
    LED system integrated into home automation for smart control.
    LED system efficient
    LED system optimized for the maximum performance/consumption ratio.
    LED system for abitazione
    Complete residential LED lighting for the whole house.
    LED system for restaurant
    LED lighting for restaurants with scenes and dimming.
    LED system for shop
    Commercial LED lighting for shops with displays and shelves.
    LED system for office
    LED lighting for offices compliant with EN 12464-1.
    LED system integrated
    LED system with all coordinated and compatible components.
    LED system to standard
    LED installation compliant with all applicable regulations.
    LED tape
    Informal synonym for LED strip; LED tape.
    LED technology evolution
    Evolution of LED technology from the first red diode to the 300 lm/W chip.
    LED test report
    Report of test results on an LED product.
    LED thermal design guide
    Guide to thermal design for LED systems.
    LED thermal model
    Thermal model for the simulation of temperature in the LED system.
    LED thermal pad
    Thermally conductive pad between the LED PCB and the heat sink.
    LED transformer
    See Power supply. Conversion device for LED strips.
    LED troffer fixture
    Rectangular LED fixture recessed in modular suspended ceilings.
    LED tube
    LED tube replacing T5 or T8 fluorescent tubes.
    LED tube lamp
    LED tube replacing linear fluorescent lamps.
    LED tube T5/T8
    LED tube replacing fluorescents; not related to LED strips.
    LED under shelf
    LED lighting mounted under shelves to enhance objects.
    LED uplight fixture
    LED fixture emitting light upwards for indirect lighting.
    LED UV
    Ultraviolet LED for sterilization, curing, and fluorescence.
    LED vanity mirror
    Mirror with integrated perimeter LED lighting.
    LED video wall
    Video wall composed of LED panels for multimedia content.
    LED voltage tester
    Instrument for verifying voltage in the LED circuit.
    LED wafer
    Semiconductor wafer on which thousands of LED dies are fabricated.
    LED wall light
    Wall-mounted LED sconce for wall-mounted lighting.
    LED wall mount
    Wall mounting of LED profiles or fixtures.
    LED warranty conditions
    Specific warranty conditions for LED products.
    LED wash light
    LED fixture for uniform lighting of surfaces.
    LED waterfall
    Decorative LED installation simulating a luminous waterfall.
    LED well light
    LED fixture recessed in the ground for garden lighting.
    LED worklight
    Portable LED light for construction sites and work areas.
    LED-to-LED spacing
    Distance between consecutive LED chips on the strip.
    LEED certification
    Sustainable building certification; LED lighting contributes to credits.
    Lega of aluminum (series 6000)
    Al-Mg-Si alloy used for LED profiles; offers good extrudability, strength, and thermal conductivity.
    Legacy system
    Pre-existing lighting system to be replaced with LEDs.
    Legge inverso of the quadrato
    Illuminance decreases with the square of the distance from the LED source.
    Legge of Beer-Lambert
    Law of light absorption in materials; for calculating diffuser opacity.
    Legge of Lambert
    Cosine distribution of luminous intensity; typical of LEDs without optics.
    Legge of Ohm
    V = I x R; fundamental for calculating LED circuits.
    Legge of Planck
    Spectral distribution of blackbody radiation; reference for LED CCT.
    Legge of Snell
    Law of refraction; for calculating the behavior of light in LED lenses.
    Legge of Stefan-Boltzmann
    Law of thermal radiation; for calculating dissipation by radiation from LED profiles.
    Legge of Wien
    Law linking the emission peak to temperature; for LED CCT.
    Legislation (LED)
    Regulations and legislation applicable to LED products.
    Length maximum of the strip
    Maximum footage connectable in a single run without voltage drop or overheating problems.
    Length maximum strip 12V
    Maximum connectable length of 12V LED strip without excessive drop; typically 5 m.
    Length maximum strip 24V
    Maximum length of 24V LED strip; typically 10 m.
    Length maximum strip 48V
    Maximum length of 48V LED strip; typically 20 m.
    Length of wave (nm)
    Distance between two crests of the electromagnetic wave; determines the perceived color of LED light.
    Length of wave of picco
    Wavelength at which the LED emits maximum power.
    Length of the diffuser
    Measurement of the LED profile cover; to be cut to the length of the profile.
    Length of the LED profile
    Longitudinal measurement of the LED profile; typically 1, 2, or 3 meters.
    Length of the LED strip
    Total measurement of the LED strip required for the project.
    Length tagliabile strip
    Length of the minimum cuttable segment of the LED strip.
    Lens
    Optical element placed above the LED chip to concentrate, diffuse, or direct the luminous beam.
    Lens acrilica LED
    PMMA lens for LED beam control.
    Lens array
    Matrix of micro-lenses positioned above an LED strip for beam control.
    Lens asimmetrica
    Optics directing the LED beam predominantly in one direction; for wall-washing.
    Lens cap
    Protective cap of the lens of a high-power LED.
    Lens collimante
    Optics transforming the divergent light of the LED into an almost parallel and concentrated beam.
    Lens diffuser combo
    Optical element combining lens and diffuser for optimized distribution.
    Lens efficiency
    Efficiency of the LED lens: ratio of output light to input light.
    Lens Fresnel
    Flat lens with concentric rings for focusing LED light; used in spotlights and projectors.
    Lens holder
    Support holding the secondary lens above the LED.
    Lens in glass LED
    Glass lens for premium LED fixtures; maximum transparency.
    Lens in policarbonato LED
    Impact-resistant PC lens for LED fixtures.
    Lens in silicone LED
    Optical silicone lens for high-power LED chips.
    Lens mount
    Support for secondary lenses to be applied to the LED source.
    Lens shift
    Displacement of the lens relative to the optical axis to decenter the LED beam.
    Lens TIR
    Total internal reflection lens for controlling the beam with high efficiency.
    Lens to barilotto
    Convex lens focusing the LED beam in a narrow angle.
    Lens type
    Type of LED lens: collimating, Fresnel, TIR, asymmetrical, diffusing.
    Level crossing (signal)
    Zero level crossing of the signal; for dimmer synchronization.
    Level of comfort LED
    Degree of visual wellness guaranteed by LED lighting.
    Level of illuminance minimum
    Lowest LED illuminance value on the target surface; for uniformity.
    Level of illuminance recommended
    Recommended illuminance value in lux by the standard for each type of environment.
    Level of LED light
    Quantity of LED light in the environment; measured in lux on the work surface.
    Level sensor
    Light level sensor for daylight harvesting.
    Lever connector
    Connector with locking lever for quick connection of LED cables.
    Lextar chip
    LED chip from Taiwanese manufacturer Lextar for general lighting.
    Library (fotometrica)
    Archive of IES/LDT photometric files of LED fixtures for simulation.
    Library LED
    LED lighting for libraries; high uniformity and low UV emission.
    Bookshelf illuminata LED
    Bookcase with integrated LED strip for lighting books.
    License plate light LED
    LED license plate light for vehicles; technology parallel to automotive strips.
    Life cycle analysis (LCA)
    Analysis of the environmental impact of LED lighting throughout its complete life cycle.
    Life cycle cost
    Total cost of LED lighting over its life cycle: purchase, energy, maintenance.
    Lifetime factor
    Factor applied in lighting calculation to account for LED degradation.
    Lifetime hours
    Operating duration in hours declared by the LED manufacturer (e.g., 50,000 h L70).
    Lifetime media LED
    Average lifetime of a batch of LEDs; 50% have reached the L70 criterion.
    Lifetime of the battery emergency
    Duration of the battery of the emergency LED module; typically 4-5 years.
    Lifetime of the diffuser
    Duration of the LED diffuser before significant yellowing.
    Lifetime of the LED profile
    Duration of the aluminum profile; practically unlimited if protected.
    Lifetime of the LED strip
    Duration of the LED strip; typically 50,000 hours at L70 under correct conditions.
    Lifetime of the power supply
    Duration of the LED power supply; typically 50,000-100,000 hours under nominal conditions.
    Lifetime operativa LED strip
    Duration in hours of the LED strip before reaching the L70 criterion.
    Lifetime operativa power supply
    Duration in hours of the LED power supply under operating conditions.
    Lifetime utile (L70/L80/L90)
    Operating duration of the LED expressed in hours until a certain percentage of residual flux is reached.
    Lifetime utile L70
    Hours of operation after which the LED maintains 70% of the initial flux.
    Lifetime utile L80
    Hours of operation after which the LED maintains 80% of the initial flux.
    Lifetime utile L90
    Hours of operation after which the LED maintains 90% of the initial flux.
    LiFi
    Data communication technology via high-frequency modulated LED light; optical alternative to Wi-Fi.
    Lift platform LED
    LED lighting for lifting platforms and elevators.
    Light welcoming LED
    Warm and soft LED lighting for welcoming environments.
    Light adequate to the environment LED
    LED lighting calibrated for the type of room.
    Light adequate to the task LED
    LED lighting calibrated for the type of activity performed.
    Light art
    Art forms using LED light as an expressive medium.
    Light art installation
    Work of art created with LED strips and modules.
    Light assembly
    Set of assembled LED components ready for installation.
    Light badge
    Luminous LED badge for identification and signaling.
    Light bar
    Rigid LED light bar for linear applications.
    Light beam ceiling
    Ceiling with integrated LED luminous beams.
    Light blade
    Thin and long LED profile creating a blade of light.
    Light bleeding
    Unwanted light leakage from edges or joints.
    Light blue
    Spectral component of white LEDs (~450 nm); discussed for possible effects on the circadian rhythm.
    Light box
    Luminous LED box for signs, displays, and backlighting.
    Light bridge
    Luminous LED structure connecting two architectural points.
    Light calculation
    Lighting calculation for sizing the LED system.
    Light canopy
    Luminous LED canopy for entrances and covered areas.
    Light ceiling tile
    Luminous LED tile for modular suspended ceilings.
    Light channel
    Continuous LED light channel for architectural linear lighting.
    Light colored LED
    LED light of any color obtained with RGB or monochromatic chips.
    Light column
    Luminous LED column for decorative vertical lighting.
    Light commissioning report
    Testing report of the LED system after installation.
    Light concentrated LED
    Narrow LED beam focused on a point for accent lighting.
    Light cone
    Cone of light emitted from an LED source; defined by the beam angle.
    Light continuous LED
    LED strip producing a line of light without visible points; COB.
    Light continuous without points LED
    Dot-free effect achieved with COB or very-high-density strips.
    Light control film
    Optical film applied to the diffuser for controlling light distribution.
    Light cove detail
    Construction detail of the luminous LED cove for the drywall contractor.
    Light crown
    Suspended luminous LED crown; for reception and representative spaces.
    Light curtain
    Luminous curtain made with vertical LED strips; for decoration.
    Light cycle (biologia)
    Lighting cycle for plant growth; managed by LED grow lights.
    Light direct
    Light emitted from the LED source directly towards the surface to be illuminated, without intermediate reflections.
    Light direction
    Main direction of the LED light beam.
    Light distribution
    Way in which the light emitted from an LED fixture is distributed in space; defined by the photometric curves.
    Light distribution curves
    See Curves of light distribution.
    Light diurna simulata LED
    Full-spectrum LED with variable CCT simulating daylight.
    Light dome
    Luminous LED dome for decorative or architectural lighting.
    Light efficient LED
    LED lighting producing maximum flux with minimum consumption.
    Light emitting area
    Area of the LED surface that emits light.
    Light engine
    Complete LED module (chip + integrated driver) ready to be inserted into a fixture.
    Light environment LED
    General LED lighting that uniformly fills the space.
    Light field
    Three-dimensional luminous field created by the LED system in an environment.
    Light fixture catalog
    Catalog of the manufacturer's LED products with specifications and photographs.
    Light float
    Floating LED fixture for decorative lighting of pools.
    Light for bathroom LED
    LED lighting specifically for bathrooms with IP protection.
    Light for corridor LED
    LED lighting for corridors with presence sensors.
    Light for kitchen LED
    LED lighting for kitchens with under-cabinet task lighting.
    Light for living-room LED
    LED lighting for living rooms with scenes and atmosphere.
    Light for quadri LED
    LED lighting for paintings and works of art; low UV and high CRI.
    Light for room LED
    LED lighting for bedrooms with warm CCT and dimming.
    Light for scale LED
    LED lighting for stairs with strip on steps or profiles in the handrail.
    Light for office LED
    LED lighting for offices compliant with standards.
    Light frame
    Luminous LED frame for mirrors, paintings, or displays.
    Light functional LED
    LED lighting designed for a specific visual task.
    Light gradient effect
    Luminous gradient effect from maximum to minimum along a surface.
    Light graze angle
    Grazing angle of LED light on a textured surface.
    Light integrated LED
    LED lighting integrated into the architecture as part of the design.
    Light integration sphere
    Integrating sphere for measuring the total luminous flux of LEDs.
    Light intensity map
    Map of the luminous intensity of LEDs on a target surface.
    Light level
    Illuminance level at a specific point; measured in lux.
    Light level meter
    Instrument for measuring illuminance level; luxmeter.
    Light line
    Continuous luminous line created with LED profiles and strips.
    Light linear
    Continuous and uniform luminous effect generated by LED strips in profiles with diffuser; a trend in interior design.
    Light loss factor (LLF)
    Overall luminous loss factor accounting for maintenance and degradation.
    Light management gateway
    Gateway for connecting the LED system to the building management network.
    Light meter app
    Smartphone application for measuring illuminance levels.
    Light mixing
    Mixing of colors from multiple LED sources to obtain a homogeneous shade.
    Light soft LED
    Diffused and uniform LED lighting without harsh shadows.
    Light hidden LED
    LED strip completely hidden on the surface; only the luminous effect is visible.
    Light natural (simulation)
    Full-spectrum and tunable CCT LEDs reproducing the variations of daylight for wellness.
    Light natural and LED
    Optimal combination of natural light and LED lighting.
    Light neutra equilibrata LED
    4000K LED lighting for multifunctional environments.
    Light nighttime LED
    Low-intensity LED lighting for night hours.
    Light of accent LED
    Focused LED lighting to enhance an object or detail.
    Light of atmosphere LED
    Soft and warm LED lighting to create ambiance.
    Light of cortesia LED
    Low-intensity LED lighting for nighttime orientation.
    Light of cortesia LED for scale
    Low-brightness LED strip for nighttime lighting of stairs.
    Light of cortesia nighttime LED
    Low-brightness LED strip for nighttime orientation.
    Light of design LED
    LED fixture with refined design for premium furnishings.
    Light of emergency LED
    LED lighting with battery that activates during blackout.
    Light of safety LED
    Emergency LED lighting indicating escape routes.
    Light of service LED
    Functional LED lighting for technical and maintenance areas.
    Light omogenea LED
    Uniform distribution of LED light without bright or dark areas.
    Light adjustable LED
    LED spotlight with adjustable beam for accent lighting.
    Light output
    Total luminous flux emitted from an LED fixture; in lumens.
    Light painting
    Photographic technique using LED strips moved in front of the camera.
    Light panel ceiling
    Ceiling composed of luminous LED panels for uniform lighting.
    Light partition
    Luminous dividing wall for open-plan environments.
    Light pattern
    Diagram of the light distribution projected by an LED fixture on a surface.
    Light perimetrale ceiling
    LED strip along the perimeter of the ceiling for indirect lighting.
    Light perimetrale LED
    LED strip along the perimeter of the environment to define its contours.
    Light pipe
    Rigid or flexible light guide transporting LED light from one point to another without dispersion.
    Light plan
    Lighting design project complete with positioning, powers, and calculations.
    Light planner
    Professional specialized in the design of LED lighting.
    Light polarizzata
    LED light filtered to oscillate in a single plane; used in specialized applications and displays.
    Light pole foundation
    Foundation for outdoor LED lighting poles.
    Light pollution (pollution luminous)
    Dispersion of light into the environment; to be minimized with full cutoff.
    Light preset button
    Button on the LED controller for recalling a preset scene.
    Light priva of UV LED
    White LED with negligible ultraviolet component; for museums and works of art.
    Light programming
    Programming of luminous scenes and effects on the LED.
    Light puntuale
    Lighting concentrated on a point via focusing optics.
    Light quality
    Set of parameters defining the quality of light: CRI, CCT, flicker, uniformity.
    Light radente
    Lighting at a low angle on a surface.
    Light receptor
    Sensor detecting light for automatic control of the LED system.
    Light ring
    Luminous LED ring; for mirrors, photography, and decorative lighting.
    Light scatter
    Scattering of light in the diffuser or in the atmosphere.
    Light scene
    See Scena luminous. Combination of memorized lighting parameters.
    Light sensor calibration
    Calibration of the light sensor for LED daylight harvesting.
    Light shelf
    Reflective shelf redirecting natural or LED light towards the ceiling.
    Light shield
    Screen blocking LED light in a specific direction.
    Light show
    Light show created with addressable LED strips and fixtures.
    Light slot
    Luminous slot in the ceiling, wall, or floor for recessed LED profiles.
    Light soffusa LED
    Soft and delicate LED lighting for relaxation environments.
    Light source module
    Interchangeable LED light source module; Zhaga standard.
    Light spectrum analyzer
    Instrument for analyzing the LED emission spectrum.
    Light spot LED
    Concentrated LED beam for point accent lighting.
    Light strip connector
    Connector for quick connection of LED strips.
    Light task LED
    Directional LED lighting for the visual task: reading, kitchen, work.
    Light therapy lamp
    LED lamp for phototherapy; treatment of seasonal affective disorder.
    Light to day LED
    LED lighting with CCT and intensity simulating natural light.
    Light to high CCT LED
    LED lighting with cool temperature above 5000K.
    Light to lama LED
    Thin and defined LED beam for architectural light cuts.
    Light to low CCT LED
    LED lighting with warm temperature below 3000K.
    Light to media CCT LED
    LED lighting with neutral temperature 3500-4500K.
    Light tower
    Luminous LED tower for lighting construction sites and large areas.
    Light transmission
    Transmission of light through the diffuser; expressed as a percentage.
    Light tree
    Decorative luminous tree made with LED strips.
    Light trespass
    Unwanted LED light invading an adjacent property.
    Light tunnel
    Luminous LED gallery for immersive effects.
    Light under mobile LED
    LED strip under furniture for a floating effect and floor lighting.
    Light under the letto LED
    LED strip under the bed for nighttime courtesy lighting.
    Light uniform LED
    Uniform LED light distribution over the entire surface.
    Light uniformity ratio
    Ratio between minimum and average illuminance on a surface.
    Light valve
    Optical valve regulating the passage of LED light.
    Light wall-wash LED
    Uniform LED distribution on a vertical wall.
    Light wash effect
    Effect of LED light flowing over a surface like a wave.
    Light well
    Light well with integrated LED strip for vertical lighting of stairs.
    Light white LED
    LED light obtained from phosphor conversion of the blue chip.
    Light year (unit)
    Astronomical unit; not related to LEDs but used metaphorically in marketing.
    Lighting accent (of accent)
    Light focused on an object or architectural detail to create contrast and attract attention.
    Lighting accentuata
    Accent LED lighting with a 3:1 or 5:1 ratio compared to the environment.
    Lighting adattiva
    LED lighting automatically adapting to conditions and needs.
    Lighting adequate
    LED lighting meeting regulatory requirements for illuminance and comfort.
    Lighting angle bar
    LED for home bar angles; warm CCT and dimmable.
    Lighting angle lettura
    LED task for reading corners; directional and dimmable light.
    Lighting anti-panico
    Emergency LED lighting to prevent panic in open spaces.
    Lighting antibagno
    LED for hallways; IP44 and motion sensor.
    Lighting architetturale
    Use of LED light as an integrated element in the architectural project to enhance volumes and surfaces.
    Lighting archivio
    LED for archives and storage; efficiency and sensors.
    Lighting as service LED
    LaaS business model with LED lighting on subscription.
    Lighting as to Service (LaaS)
    Business model with LED lighting provided as a subscription service.
    Lighting ascensore
    LED for elevator cabins; slim profiles and anti-vandalism.
    Lighting audit report
    Report of the energy audit of the LED lighting of a building.
    Lighting automation
    Automation of LED lighting via sensors, timers, and programmed logic.
    Lighting autorimessa
    LED for garages; high uniformity and presence sensors.
    Lighting banco sale
    LED for sales counters; food lighting and high CRI.
    Lighting bar
    LED for bars; atmosphere with colors and dimming.
    Lighting bathroom turco
    LED resistant to steam for Turkish baths and hammams.
    Lighting bidirezionale
    LED fixture emitting light both downwards and upwards.
    Lighting bilanciata
    Balanced LED lighting between direct and indirect light.
    Lighting biotopo
    LED lighting for aquariums and terrariums simulating natural conditions.
    Lighting bollard
    Luminous LED bollard for pathways and gardens.
    Lighting boutique
    LED for boutiques; high CRI and scenes for fashion.
    Lighting box auto
    LED for garages; IP65 and door sensor.
    Lighting bus
    Communication bus dedicated to lighting (DALI, DMX).
    Lighting cabin doccia
    IP65 LED for the interior of the shower cabin.
    Lighting cabin telefonica
    LED for telephone booths and acoustic boxes; compact and uniform.
    Lighting calculation
    Design based on photometric data to determine the number and position of necessary LED sources.
    Lighting camerino
    LED for fitting rooms in stores; high CRI and natural CCT.
    Lighting campo from tennis
    LED for tennis courts; high uniformity and anti-flicker.
    Lighting campo of calcio
    LED for football fields; very high power and uniformity.
    Lighting canile
    LED for kennels and animal shelters; resistant and efficient.
    Lighting carbon neutral
    LED system powered by renewable sources with zero emissions.
    Lighting casello
    LED for toll booths; high visibility.
    Lighting cell frigorifera
    LED for cold rooms; resistant to low temperatures.
    Lighting centrata on the persona
    See Human Centric Lighting; LED lighting for wellness.
    Lighting channel
    Communication channel for the control of LED lighting.
    Lighting chiesa
    LED for churches; respecting architecture and low UV.
    Lighting chirurgica
    Very-high-CRI LED for operating rooms.
    Lighting cinetica
    LED installation with moving elements for dynamic effects.
    Lighting circadiana
    Lighting following the day/night biological rhythm.
    Lighting circuit
    Electrical circuit dedicated to powering LED fixtures.
    Lighting class (stradale)
    Classification of roads for sizing public LED lighting.
    Lighting classic stile
    LED integrated in fixtures with classic and decorative design.
    Lighting commercial
    LED for shops, offices, and commercial spaces; efficiency and comfort.
    Lighting commissioning
    Testing and commissioning process of the LED system.
    Lighting consultant
    Professional specialized in lighting consulting.
    Lighting contatore
    LED for meter rooms; compact and resistant.
    Lighting contractor
    Installation company specialized in LED installations.
    Lighting control
    Hardware and software system for lighting management: dimming, scenes, automation.
    Lighting control interface
    Hardware/software interface for LED lighting control.
    Lighting control panel
    Centralized control panel for managing LED lighting.
    Lighting control protocol
    Communication protocol for LED control: DALI, DMX, KNX, Zigbee.
    Lighting control relay
    Relay dedicated to switching LED circuits in the electrical panel.
    Lighting control sensor
    Sensor for automatic control of LED lighting.
    Lighting control strategy
    LED control strategy to maximize savings and comfort.
    Lighting control system architecture
    Architecture of the LED control system: centralized, distributed, hybrid.
    Lighting control zone
    Zone of the building with independently controlled LED lighting.
    Lighting controller
    Hardware device for managing LED lighting.
    Lighting cornice
    LED strip in a cornice for perimeter indirect light.
    Lighting corridor hospital
    LED for hospital corridors; emergency and comfort.
    Lighting corridor hotel
    LED for hotel corridors; sensors and elegant scenes.
    Lighting cortile condominiale
    LED for condominium courtyards; efficiency and twilight sensors.
    Lighting cost analysis
    Cost analysis of LED lighting: investment, operation, maintenance.
    Lighting cromoterapica
    RGB LED for chromotherapy in spas and wellness centers.
    Lighting deposito
    LED for storage and warehouses; efficiency and sensors.
    Lighting design
    Design discipline studying the quality, quantity, and distribution of LED light in environments.
    Lighting designer
    Professional specialized in the design of LED lighting.
    Lighting diffused uniform
    LED with uniform distribution throughout the environment.
    Lighting dimmable
    LED system with brightness adjustment capability.
    Lighting direzionale
    LED with a concentrated beam for accent lighting.
    Lighting disimpegno
    LED for hallways and passages; presence sensor.
    Lighting distribution
    Distribution of LED light in space; defined by photometric curves.
    Lighting domestica
    LED for residential environments; comfort and atmosphere.
    Lighting edge pool
    LED for pool edges; IP67 and low-level installation.
    Lighting efficace LED
    LED system achieving the objectives with minimum resources.
    Lighting efficacy requirement
    Minimum luminous efficacy requirement imposed by energy regulations.
    Lighting efficient
    LED with a high lumen/watt ratio for energy savings.
    Lighting electrical panel
    LED for the interior of electrical panels; compact and functional.
    Lighting energy savings
    Energy savings obtained by switching to LED.
    Lighting engineering
    Engineering of LED lighting; specialized technical discipline.
    Lighting environmental
    General diffused lighting providing the base luminous level of an environment.
    Lighting equipment
    Equipment for LED lighting: sources, drivers, optics, controls.
    Lighting fienile
    LED for renovated barns; rustic style with surface-mounted profiles.
    Lighting fixture schedule
    Detailed list of all LED fixtures planned in a project.
    Lighting flexible
    Reconfigurable LED system for different uses of the environment.
    Lighting food court
    LED for food court areas; food lighting and atmosphere.
    Lighting functional
    LED designed for a specific visual task; task lighting.
    Lighting gradevole
    LED with comfort parameters: low UGR, high CRI, no flicker.
    Lighting guardiola
    LED for guardhouses and porter's lodges; compact and functional.
    Lighting hood kitchen
    LED integrated in the kitchen range hood.
    Lighting ibrida
    Combination of LED light and natural light in the environment.
    Lighting immersiva
    LED completely enveloping the space for sensory experiences.
    Lighting input palazzo
    LED for building entrances; scenes and sensors.
    Lighting installation standard
    Standard for the proper installation of LED installations.
    Lighting integrated LED
    LED system integrated into the building's architecture.
    Lighting intelligent
    LED with sensors, automation, and connectivity for smart management.
    Lighting interattiva
    LED reacting to presence, gestures, or user input.
    Lighting isola kitchen
    Suspended or recessed LED for the kitchen island.
    Lighting kitchen isola
    Suspended LED above the kitchen island; dimmable.
    Lighting kitchen professional
    LED for professional kitchens; IP65 and high CRI.
    Lighting laboratory orafo
    LED for goldsmithing; very high CRI and task lighting.
    Lighting lateral
    LED illuminating a surface from the side; for depth effects.
    Lighting layout
    Plan layout of LED fixtures in a project.
    Lighting level standard
    Standard defining recommended illuminance levels for each environment type.
    Lighting linear
    Fixture or LED system generating a continuous line of light; achieved with profiles and LED strips.
    Lighting linear ceiling-mounted
    Linear LED profiles mounted on the ceiling for general lighting.
    Lighting linear sospesa
    Suspended linear LED profiles for direct-indirect lighting.
    Lighting linear wall-mounted
    Linear LED profiles mounted on the wall for functional lighting.
    Lighting locale caldaia
    LED for boiler rooms; resistant and functional.
    Lighting maintenance schedule
    Program of periodic maintenance of the LED system.
    Lighting management system
    Software system for centralized management of LED lighting.
    Lighting master plan
    General plan of LED lighting for an entire building or urban area.
    Lighting mista
    Combination of different types of LED fixtures in the same environment.
    Lighting modular
    Composable LED system with interchangeable elements.
    Lighting monocromatica
    LED emitting a single color for specific applications.
    Lighting multicolore
    RGB or RGBW LED for creating chromatic scenes.
    Lighting natural simulata
    Full-spectrum LED reproducing the spectrum of sunlight.
    Lighting needs assessment
    Assessment of lighting needs for LED design.
    Lighting nighttime outdoor
    Low-brightness LED for nighttime lighting of gardens and facades.
    Lighting nursery
    LED for nurseries; safe, colored, and dimmable.
    Lighting of cortesia
    Low-brightness LED for indicating paths and exits.
    Lighting of detail
    LED focused on an architectural detail or an object.
    Lighting of facade to colors
    RGB LED for facades with dynamic chromatic scenes.
    Lighting of quality LED
    LED system with high parameters: CRI>90, flicker-free, low UGR.
    Lighting of quality upper LED
    LED system with excellent parameters: CRI>95, flicker-free, low UGR.
    Lighting of safety
    Subcategory of emergency indicating escape routes.
    Lighting of transition
    LED in passage zones between environments with different levels.
    Lighting of the paesaggio
    LED for parks, gardens, and green spaces; integration with the landscape.
    Lighting of the patrimonio
    LED for historic buildings and monuments; discreet integration.
    Lighting on measures
    LED system designed and configured for the specific needs of the project.
    Lighting optimal
    LED lighting meeting all regulatory and comfort requirements.
    Lighting outdoor villa
    LED for outdoor lighting of villas; facades and gardens.
    Lighting panificio
    LED for bakeries; food lighting and heat resistance.
    Lighting passerella fashion
    LED for fashion runways; high power and excellent CRI.
    Lighting performance indicator
    Key performance indicator of LED lighting (KPI).
    Lighting perimetrale
    LED strips installed along the perimeter of a room or piece of furniture to define luminous contours.
    Lighting custom
    LED system configured according to the user's specific preferences.
    Lighting pet shop
    LED for pet shops; suitable spectrum and resistant.
    Lighting pizzeria
    LED for pizzerias; food lighting and warm atmosphere.
    Lighting plan
    Technical drawing with positioning and specifications of all LED light points.
    Lighting plan bar
    LED for bar counters; warm atmosphere and dimmable.
    Lighting portone
    LED for entrance doors; twilight sensor and presence.
    Lighting posta pneumatica
    LED for pneumatic transport systems; indicators.
    Lighting power budget
    Power budget allocated for LED lighting in the energy project.
    Lighting power density (LPD)
    Installed LED power per square meter (W/m2); efficiency indicator.
    Lighting prescription
    Detailed lighting specification for purchasing LED products.
    Lighting product certification
    Compliance certification of LED products to applicable standards.
    Lighting puntuale decorative
    LED focused on a decorative object to enhance it.
    Lighting quality metric
    Metric for evaluating the quality of LED lighting: CRI, CCT, UGR, flicker.
    Lighting rasoterra
    LED at floor level for path signaling and atmosphere.
    Lighting Reality
    LED lighting calculation software for street lighting.
    Lighting recessed
    Installation of LED profiles or fixtures integrated flush with the surface (ceiling, wall, floor).
    Lighting recessed in the drywall
    LED profile integrated into the suspended drywall ceiling.
    Lighting recessed in the floor
    LED in the walking surface with walkable profiles.
    Lighting recessed in the metal
    LED profile integrated into a housing in the metal.
    Lighting recessed in the wood
    LED profile integrated into a milling in the wood.
    Lighting recessed linear
    Linear LED profile recessed into the ceiling or wall.
    Lighting regulation
    Local or national regulations on LED lighting.
    Lighting research
    Scientific research on LED lighting and its effects.
    Lighting retrofit
    Complete replacement of the existing lighting system with LED.
    Lighting room hotel
    LED for hotel rooms; customizable scenes and dimming.
    Lighting room operatoria
    Very-high-CRI surgical LED; not related to strips.
    Lighting sagrestia
    LED for sacristies; warm CCT and respect for the environment.
    Lighting sala attesa
    LED for waiting rooms; comfort and relaxing atmosphere.
    Lighting sala biliardo
    LED for billiard rooms; high uniformity on the table.
    Lighting sala bowling
    LED for bowling alleys; effects and atmosphere.
    Lighting sala colazione
    LED for hotel breakfast rooms; warm CCT and dimmable.
    Lighting sala degustazione
    LED for wine tasting rooms; warm CCT and high CRI.
    Lighting sala fitness
    LED for fitness rooms; high uniformity and anti-stroboscopic.
    Lighting sala giochi
    LED for game rooms; colorful effects and dimming.
    Lighting sala mensa
    LED for canteens; uniformity and comfort.
    Lighting sala mostre
    LED for exhibition halls; CRI>95 and UV protection.
    Lighting sala of appearance
    LED for conference rooms; comfort and efficiency.
    Lighting sala parto
    LED for delivery rooms; dimmable and CCT adjustable.
    Lighting sala prove
    LED for rehearsal rooms; uniform and dimmable.
    Lighting sala relax
    LED for relaxation rooms; soft scenes and chromotherapy.
    Lighting sala riunioni large
    LED for large meeting rooms; zoning and scenes.
    Lighting sala server
    LED for server rooms; efficient and low thermal load.
    Lighting sala studio
    LED for music studios; uniform and flicker-free.
    Lighting sala yoga
    LED for yoga rooms; warm CCT, dimmable, and chromotherapy.
    Lighting salone bellezza
    LED for beauty salons; high CRI and illuminated mirrors.
    Lighting scantinato
    LED for basements; resistant to humidity and efficient.
    Lighting scene controller
    Controller dedicated to the management of predefined lighting scenes.
    Lighting scenografica
    Use of colored and dynamic LED light to create atmospheres and visual effects in events or commercial spaces.
    Lighting schedule
    Time programming of LED lighting for automation.
    Lighting segnapasso
    Low-brightness LED along corridors and stairs for nighttime orientation.
    Lighting serra
    LED grow light for greenhouses; spectrum optimized for plants.
    Lighting shop optics
    LED for optician's shops; high CRI and absence of reflections.
    Lighting simulation
    Computerized simulation of the light distribution.
    Lighting simulation report
    Report of the lighting simulation with results and recommendations.
    Lighting specification
    Technical specification of the LED lighting for the tender.
    Lighting spogliatoio
    LED for changing rooms; IP44 and high uniformity.
    Lighting standard compliance
    Compliance of the LED system with current lighting standards.
    Lighting stratificata
    LED design on multiple levels: ambient, task, accent for a complete environment.
    Lighting subacquea
    IP68 LED for swimming pools, fountains, and decorative basins.
    Lighting surface-mounted linear
    Linear LED profile applied directly to the surface.
    Lighting survey
    Field survey with measurements of lux and distribution.
    Lighting suspended
    LED profiles suspended via cables or rods from the ceiling; create both direct and indirect light.
    Lighting suspended linear
    Linear LED profile suspended from the ceiling with cables.
    Lighting system integration
    Integration of the LED system with other building systems.
    Lighting technique
    LED for technical environments: laboratories, server rooms, electrical panels.
    Lighting technology comparison
    Comparison between LED and other technologies: fluorescent, halogen, HID.
    Lighting temporary
    LED for temporary installations: events, construction sites, exhibitions.
    Lighting tender
    Tender for the supply and installation of LED lighting.
    Lighting terapeutica
    LED with specific spectrum for therapeutic and wellness applications.
    Lighting test laboratory
    Accredited laboratory for photometric and safety tests on LEDs.
    Lighting tettoia
    LED for canopies and shelters; IP65 and sensors.
    Lighting to beam wide
    LED strip with a wide emission angle for uniform distribution.
    Lighting to day LED
    LED lighting simulating daylight conditions.
    Lighting to double emission
    LED profile emitting both downwards and upwards.
    Lighting to effect
    LED strip used to create decorative and scenic effects.
    Lighting to LED costi
    Cost analysis of LED lighting: purchase, installation, operation.
    Lighting to LED saving
    Energy savings obtained with LED lighting: 50-80% compared to traditional.
    Lighting to led advantages
    Advantages of LED lighting: efficiency, duration, light quality, dimmability.
    Lighting to LED advantages and svantaggi
    Comparison between advantages (efficiency, duration) and limits (initial cost) of LED technology.
    Lighting to low impact LED
    LED system designed to minimize environmental impact.
    Lighting to saving LED
    LED system optimized for maximum energy savings.
    Lighting to standard of legge LED
    LED system compliant with all current regulations.
    Lighting to terra LED
    In-ground LED fixtures for pathway and garden lighting.
    Lighting to track
    LED system on electrified track for adjustable spotlights; used in retail and galleries.
    Lighting track
    See Track electrified. Rail system for LED spotlights.
    Lighting under shelf
    Strip under shelves for functional and decorative light.
    Lighting under-cabinet
    Strip under kitchen cabinets for the work surface.
    Lighting uniform
    LED with distribution ensuring uniformity over the entire surface.
    Lighting uniformity standard
    Regulatory requirement for LED lighting uniformity.
    Lighting vasca idromassaggio
    IP68 LED for hot tubs; chromotherapy.
    Lighting vertical
    LED illuminating vertical surfaces: walls, columns, facades.
    Lighting viale alberato
    LED for tree-lined avenues; respect for the landscape.
    Lighting vivaio
    LED grow lights for nurseries; spectrum for plants and efficiency.
    Lighting warehouse frigorifero
    LED for cold storage warehouses; operation at low temperatures.
    Lighting with sensori
    LED system with sensors for automatic control of switching on and dimming.
    Lighting zero flicker
    LED with a power supply ensuring total absence of flicker.
    Lighting zone plan
    Zoning plan of LED lighting in a project.
    Lima for aluminum
    File for finishing the cut edges of the LED profile.
    Limit of power strip
    Maximum power allowed per meter from the LED strip without overheating.
    Line luminous ceiling-mounted
    LED profile on the ceiling creating a continuous line of light.
    Line luminous wall-mounted
    LED profile on the wall creating a horizontal or vertical line of light.
    Line of fuga LED
    Luminous LED line disappearing at the horizon for a perspective effect.
    Line of LED light
    Continuous linear lighting effect achieved with profiles and LED strips.
    Line voltage
    Mains voltage (230V AC in Europe); to be converted for the LED strip.
    Linear fixture
    Linear-shaped LED fixture for continuous lighting.
    Linear lighting system
    Complete system of profiles, strips, and accessories for linear light.
    Linkable fixture
    LED fixture connectable in series with others to create continuous lines.
    Listino accessories LED
    Prices of accessories for LED profiles: clips, end caps, connectors.
    Listino aggiornato LED
    Current prices of the manufacturer's LED products.
    Listino LED controller
    Prices of LED controllers available in the catalog.
    Listino LED power supplies
    Prices of LED power supplies available in the catalog.
    Listino LED profiles
    Prices of aluminum LED profiles per linear meter.
    Listino LED strip
    Prices of LED strips per linear meter.
    Listino prezzi LED
    List of prices of the manufacturer's or distributor's LED products.
    Litestar 4D
    Lighting calculation software for LED design.
    Live wire
    Phase conductor of the electrical network; connected to the input of the LED power supply.
    Livella laser to croce
    Laser level projecting two cross lines for precise alignment of LED profiles.
    Livella to bolla
    Spirit level for verifying the horizontality of the LED profile during mounting.
    LM-79
    IES standard for measuring the photometric and colorimetric performance of complete LED fixtures.
    LM-80
    IES standard for measuring the luminous decay of the LED package over time.
    Load balancing
    Balanced distribution of the LED load between multiple power supplies.
    Load calculation
    Calculation of total power for sizing power supplies and LED cables.
    Load LED
    Total power absorbed by the strips connected to a power supply.
    Load maximum
    Maximum power (in Watts) that a power supply or controller can handle before overloading.
    Load maximum LED power supply
    Maximum power in Watts that the LED power supply can deliver.
    Load minimum (dimmer)
    Minimum power required for the correct operation of an LED dimmer.
    Load nominal power supply
    Nominal power declared by the LED power supply.
    Load resistivo
    Purely resistive load; LEDs approach a load with a capacitive component.
    Lobby application
    LED lighting for halls and reception areas; suspended profiles and welcome scenarios.
    Local control
    Control of LED lighting via local switches and dimmers.
    Locking connector
    Connector with mechanical lock to prevent accidental disconnections.
    Loft LED
    LED lighting for lofts and open spaces; suspended profiles and scenes.
    Loggia LED
    LED lighting for loggias and covered terraces.
    Logistica LED
    Management of the distribution chain of LED products.
    Logistics application
    LEDs for logistics centers and warehouses; high-bay fixtures and automation.
    Long throw
    Narrow LED beam for illuminating objects at a great distance.
    Looping
    Ring connection returning to the starting point; for redundancy.
    LOR (Light Output Ratio)
    Ratio between luminous flux emitted by the fixture and flux emitted by the LED source alone.
    Loss in the diffuser
    Reduction of luminous flux through the diffuser; opal ~30%.
    Loss in the driver
    Power dissipated as heat by the LED power supply; efficiency loss.
    Loss of efficiency LED
    Reduction of the efficiency of the LED system due to temperature or aging.
    Lossless dimming
    Dimming without chromatic distortion; the shade remains constant.
    Lotto of production LED
    Quantity of LED products manufactured in the same production session.
    Louver (grid)
    Anti-glare optical grid applied in front of the LED source.
    Low Bay LED
    LED fixture for low-medium ceilings (3-6 m).
    Low glare
    Characteristic of an LED fixture with a low UGR glare index.
    Low power (strip)
    Strip with power less than or equal to 4.8 W/m; decorative and pathway.
    Low profile
    LED profile with very low height for ultra-flat installations.
    Low ripple
    Power supply with minimum residual ripple for absence of flicker.
    Low temperature adhesive
    Special double-sided tape for LED strips in cold environments (<0°C).
    Low voltage
    Voltage less than or equal to 50V AC or 120V DC; standard for LED strips.
    Low voltage cable
    Low voltage cable suitable for connecting LED strips.
    Low voltage disconnect
    Protection disconnecting the LED load when the voltage drops too low.
    Loxone
    Austrian home automation system with native LED integration.
    LPD (Lighting Power Density)
    LED power per square meter; regulatory efficiency indicator.
    LSZH (material)
    Low Smoke Zero Halogen material for LED cable sheaths in public buildings.
    Lumen (lm)
    Unit of measurement of the total luminous flux emitted from an LED source.
    Lumen depreciation
    See "Decay luminous". Reduction of flux over time due to LED aging.
    Lumen efficacy
    See Luminous efficacy. Ratio lm/W.
    Lumen for metro 1000
    LED strip with a flux of 1000 lm/m; for general lighting.
    Lumen for metro 1500
    LED strip with a flux of 1500 lm/m; for task lighting.
    Lumen for metro 2000
    LED strip with a flux of 2000 lm/m; for high-power lighting.
    Lumen for metro 3000
    LED strip with a flux of 3000 lm/m; for primary lighting.
    Lumen for metro 4000
    LED strip with a flux of 4000 lm/m; for very-high-power lighting.
    Lumen for metro 500
    LED strip with a flux of 500 lm/m; for decorative lighting.
    Lumen for watt
    See Luminous efficacy.
    Lumen maintenance
    Percentage of the initial luminous flux maintained after a certain number of operating hours.
    Lumen output
    Total luminous flux emitted; in lumens.
    Lumen total LED system
    Sum of the luminous flux of all the LEDs in the system.
    Lumen/metro (lm/m)
    Luminous flux emitted per linear meter of LED strip; key parameter for sizing.
    Lumens chip
    LED chip from the manufacturer Lumens for high-efficiency strips.
    Lumileds Luxeon
    Family of Luxeon LED chips from Lumileds for professional lighting.
    Luminaire
    International term for a complete lighting fixture.
    Luminance (cd/m²)
    Luminous intensity per unit of surface perceived by the eye; determines the sensation of brilliance.
    Luminance contrast
    Difference in luminance between two adjacent areas.
    Luminance maximum
    Highest luminance on the surface of the LED diffuser; for UGR calculation.
    Luminance meter
    Instrument for measuring luminance in cd/m2.
    Luminance of threshold
    Minimum luminance perceivable by the eye; for LED sizing.
    Luminance uniform
    Uniform distribution of luminance over the entire luminous surface; objective of quality diffusers.
    Luminous area
    Visible emitting surface of an LED fixture.
    Luminous ceiling
    Luminous ceiling made with LED panels or diffused strips.
    Luminous efficacy (lm/W)
    Ratio between luminous flux emitted and electrical power absorbed; key parameter for energy efficiency.
    Luminous efficacy of the radiation
    Ratio between luminous flux and radiant power of the LED; in lm/W.
    Luminous exitance
    Luminous flux emitted per unit area of a surface.
    Luminous flux
    See Luminous flux. Total quantity of light in lumens.
    Luminous flux (lumen, lm)
    Total quantity of light emitted from an LED source in all directions; unit of measurement: lumen.
    Luminous flux declared strip
    Flux in lumens per meter declared by the LED strip manufacturer.
    Luminous flux for metro
    Lumens emitted by the LED strip per linear meter; fundamental parameter.
    Luminous flux iniziale
    Flux measured after 100 hours of operation; reference LED value.
    Luminous flux mantenuto
    LED flux at the end of useful lifetime; parameter for lighting calculation.
    Luminous flux measured strip
    Flux in lumens per meter measured in the laboratory on the LED strip.
    Luminous flux total system
    Sum of the flux of all the LED fixtures in the system.
    Luminous intensity
    See Luminous intensity. Flux per solid angle in candelas.
    Luminous intensity (candela, cd)
    Luminous flux emitted per unit of solid angle in a specific direction; unit: candela.
    Luminous intensity assiale
    LED intensity measured on the optical axis; the maximum value.
    Luminous intensity media
    Average LED intensity in all directions; for calculating total flux.
    Lux (lx)
    Unit of measurement of illuminance; 1 lux = 1 lumen per square meter.
    Luxmetro
    Portable measuring instrument for detecting the illuminance level (lux) of a surface. ↑ Back to top

    M

    M12 connector
    Waterproof circular industrial connector for LED systems.
    M3/M4/M5 screw
    Metric screws of various diameters for fixing LED profiles.
    M8/M10 bolt
    Metric bolts for mounting LED brackets and supports.
    MacAdam (ellisse di)
    Area in the CIE diagram defining the perceivable chromatic tolerance; steps 1-3 indicate excellent uniformity.
    MacAdam step 1
    Imperceptible chromatic variation between LEDs; maximum quality.
    MacAdam step 2
    Minimal chromatic variation; excellent for professional LED strips.
    MacAdam step 3
    Barely perceptible chromatic variation; good for LED strips.
    MacAdam step 5
    Perceptible chromatic variation; acceptable for decorative LEDs.
    Machine room LED
    LED lighting for machine rooms and technical areas.
    Machine vision LED
    Specific LED lighting for machine vision systems.
    Macro lens
    Magnifying lens used for inspecting LED chips.
    Made in Europe LED
    LED products manufactured in Europe with high quality standards.
    Made in Italy profilo LED
    Aluminum LED profile manufactured in Italy.
    Madrix
    Software for controlling addressable LED strips and LED matrices.
    Magazzino prodotti LED
    Storage warehouse for LED components for distribution.
    Magnetic ballast
    Traditional electromagnetic ballast; replaced by LED drivers.
    Magnetic base LED
    Portable LED lamp with magnetic base for attachment to metal surfaces.
    Magnetic clip
    Magnetic clip for quick fixing of the LED profile on metal surfaces.
    Magnetic connector
    Magnetic connector for quick and secure connection of LED strips.
    Magnetic diffuser
    Diffuser retained by magnets for easy removal and maintenance.
    Magnetic door contact
    Magnetic door contact for activating LED lighting.
    Magnetic driver mount
    Magnetic mounting of the LED driver for easy replacement.
    Magnetic fastener
    Magnetic fixing for LED profiles on metal surfaces.
    Magnetic mount profile
    LED profile with magnetic mounting for quick installation on metal.
    Magnetic mounting
    Fixing via magnets of LED strips and profiles on metal surfaces.
    Magnetic reed switch
    Magnetic reed switch for activating LEDs in furniture.
    Magnetic strip mount
    Mounting of the LED strip via a magnetic strip on the back.
    Magnetic track
    Magnetic track for LED spotlights with quick mounting.
    Magneto-resistive sensor
    Magneto-resistive sensor for position detection in LED systems.
    Magnetotermico
    Automatic circuit breaker; must be sized considering the inrush current of LED power supplies.
    Main breaker
    Main circuit breaker of the electrical panel for the LED installation.
    Main distribution board
    Main electrical panel with protections for LED circuits.
    Main driver
    Main power supply of an LED installation with multiple drivers.
    Main feeder cable
    Main power cable from the mains input to the LED installation.
    Main switch
    Main switch of the LED installation in the electrical panel.
    Maintained emergency
    Emergency LED fixture always on, even in normal conditions.
    Maintenance access panel
    Removable panel for access to LED power supplies in the suspended ceiling.
    Maintenance checklist
    Checklist for periodic maintenance of the LED installation.
    Maintenance contract
    Contract for periodic maintenance of the LED installation.
    Maintenance cost
    Cost of maintenance of the LED installation over its life cycle.
    Maintenance cycle
    Programmed maintenance cycle of the LED installation.
    Maintenance diagram
    Diagram of maintenance operations for the LED installation.
    Maintenance factor
    See Maintenance factor. Coefficient for lighting calculation.
    Maintenance free
    LED system designed to require no maintenance during its useful life.
    Maintenance interval
    Interval between maintenance interventions on the LED installation.
    Maintenance log
    Log of maintenance operations performed on the LED installation.
    Maintenance plan
    Planned maintenance program for the LED installation.
    Maintenance procedure
    Operating procedure for maintaining the LED installation.
    Maintenance record
    Historical documentation of the LED installation maintenance.
    Maintenance report
    Report on the status of the LED installation after maintenance.
    Maintenance schedule
    Schedule of periodic maintenance of the LED installation.
    Maintenance tool kit
    Tool kit for maintaining the LED installation.
    Maintenance training
    Training of personnel for the maintenance of the LED installation.
    Mall LED installation
    LED installation for shopping centers with linear profiles and scenes.
    Mall lighting
    LED lighting for shopping centers; high uniformity and CRI.
    Mandrel bending
    Mandrel bending of LED profiles for precise curves.
    Mansarda LED
    LED lighting for attics; slim profiles for sloping ceilings.
    Manual control panel
    Manual control panel with switches and dimmers for LEDs.
    Manual dimmer
    Dimmer with manual adjustment via knob, slider, or button.
    Manual dimming
    Manual adjustment of LED brightness via a physical dimmer.
    Manual operation
    Manual operation of the LED installation without automation.
    Manual override
    Manual command overriding the automatic LED control.
    Manual switch
    Manual switch for turning LEDs on and off.
    Manuale di installazione LED
    Document with complete instructions for mounting the LED system.
    Manuale di uso LED
    Document for the end user with instructions for using the LED installation.
    Manuale tecnico profilo LED
    Document with specifications and installation instructions for the LED profile.
    Manuale tecnico strip LED
    Document with specifications and application instructions for the LED strip.
    Manufacturer code
    Manufacturer's code printed on LED strips and power supplies.
    Manufacturing date code
    Date code printed on the LED strip for traceability.
    Manufacturing defect
    Manufacturing defect of the LED strip detected during quality control.
    Manufacturing lot
    Production lot of LED strips with uniform characteristics.
    Manufacturing process
    Manufacturing process of LED strips: SMT, soldering, testing, packaging.
    Manufacturing tolerance
    Dimensional and electrical tolerances in the production of LED strips.
    Manutenibilità dell'impianto LED
    Ease of access and replacement of LED components.
    Manutenzione correttiva LED
    Intervention to repair faults in the LED installation.
    Manutenzione del diffusore
    Periodic cleaning of the LED diffuser to maintain luminous flux.
    Manutenzione del profilo LED
    Periodic inspection and cleaning of the aluminum LED profile.
    Manutenzione dell'impianto LED
    Periodic operations to maintain the performance of the LED installation.
    Manutenzione della strip LED
    Replacement of the LED strip in the profile for upgrade or end of life.
    Manutenzione ordinaria
    Periodic operations of cleaning diffusers and checking connections to maintain the efficiency of the LED installation.
    Manutenzione preventiva LED
    Programmed interventions to prevent faults in the LED installation.
    Manutenzione programmata LED
    Periodic planned interventions to maintain the LED installation.
    Map display LED
    LED display for visualizing maps and floor plans.
    Maple finish profile
    LED profile with maple wood effect finish for integration with wooden furnishings.
    Mappa colore
    Graphic representation of the color distribution on a surface illuminated by LEDs.
    Mappa colori RGB
    Visual representation of all colors producible by the RGB LED strip.
    Mappa di illuminamento
    Graphic representation of the LED illuminance level on the surface.
    Mappa di luminanza
    Graphic representation of the perceived luminance in the LED-lit environment.
    Mappa termica
    Color image of the temperature distribution on the LED profile and strip.
    Marble effect LED
    LED profile with marble effect finish for classic environments.
    Marca del profilo LED
    Manufacturer of the aluminum LED profile.
    Marca dell'alimentatore LED
    Manufacturer of the LED power supply; Mean Well is the leader.
    Marca della strip LED
    Manufacturer of the LED strip; influences quality and reliability.
    Marca di qualità LED
    LED manufacturer recognized for reliability and performance.
    Margin of safety
    Safety margin in sizing the LED power supply: typically 20%.
    Margine di contribuzione LED
    Difference between revenue and variable cost in the sale of LED products.
    Margine di potenza alimentatore
    Excess power of the power supply over the LED load; typically 20%.
    Marine connector
    Marine-use connector resistant to salt corrosion for LEDs.
    Marine environment
    Aggressive marine environment requiring salt-resistant LED materials.
    Marine grade
    Marine-grade LED component; resistant to salt corrosion.
    Marine grade cable
    Corrosion-resistant cable for coastal LED installations.
    Marine grade connector
    Waterproof and corrosion-resistant connector for marine LEDs.
    Marine grade profile
    LED profile in marine aluminum or stainless steel for coastal environments.
    Marine LED fixture
    Certified LED fixture for naval and coastal use.
    Marker light LED
    LED signaling light to indicate position or path.
    Marketing prodotti LED
    Promotional activities for the commercialization of LED products.
    Marking (strip)
    Markings and symbols printed on the LED strip: cut point, polarity, product code.
    Mast LED
    LED lighting mounted on a pole for outdoor lighting.
    Mast mount bracket
    Bracket for mounting LED fixtures on poles.
    Master clock
    Central clock synchronizing the time programming of the LED installation.
    Master controller
    Main LED controller coordinating slaves and amplifiers.
    Master dimmer
    Main dimmer controlling all other LED dimmers in the installation.
    Master switch
    Main switch turning on/off the entire LED installation.
    Master-slave
    Configuration where a master controller synchronizes one or more slave amplifiers for extended LED strips.
    Material certificate
    Certificate of materials used in the production of LED profiles.
    Material compliance
    Conformity of LED product materials to regulations (RoHS, REACH).
    Material data sheet
    Technical data sheet of the LED profile and diffuser materials.
    Material safety
    Safety of LED product materials; absence of harmful substances.
    Material safety data sheet (MSDS)
    Safety data sheet for materials used in LED products.
    Materiale del diffusore LED
    Type of cover material: PMMA, polycarbonate, silicone, glass.
    Materiale del profilo LED
    Type of aluminum of the profile: 6063, 6060, 6005A.
    Materiale del tappo profilo
    Type of material for the end cap: aluminum, plastic, silicone.
    Materiale della clip LED
    Type of clip material: steel, aluminum, plastic.
    Materiale della strip LED
    Components of the strip: FPCB substrate, copper, LEDs, resistors, phosphor.
    Materiale di fissaggio LED
    Screws, clips, and anchors for mounting the LED system.
    Matita da falegname
    Carpenter's pencil for marking fixing points of the LED profile on wood.
    Matrice di compatibilità LED
    Table indicating compatibility between LED strips, profiles, drivers, and controllers.
    Matrice di Mueller
    Matrix for describing the polarization of LED light.
    Matrice LED
    Arrangement of LEDs in rows and columns to create programmable displays or panels.
    Matte black profile
    LED profile with matte black finish for a discreet and modern design.
    Matte finish
    Matte finish of the LED profile; reduces reflections and fingerprints.
    Matte white profile
    LED profile with matte white finish for integration with light ceilings.
    Matter (protocollo)
    Smart home interoperability standard unifying Wi-Fi, Thread, and Bluetooth.
    Max ambient temperature
    Maximum ambient temperature for correct operation of the LED system.
    Max cable length
    Maximum cable length between power supply and strip without excessive drop.
    Max cable run
    Maximum cable length between power supply and LED strip without problems.
    Max continuous load
    Maximum continuous load supported by the LED power supply.
    Max current per channel
    Maximum current per channel of the LED controller.
    Max dimming level
    Maximum dimming level; typically 100%.
    Max junction temperature
    Maximum junction temperature of the LED; absolute limit of the chip.
    Max load
    Maximum load supported by an LED power supply or controller.
    Max load per channel
    Maximum power per channel of the LED controller.
    Max operating temperature
    Maximum operating temperature of the LED system.
    Max power consumption
    Maximum consumption of the LED installation at full brightness.
    Max run length
    Maximum length of LED strip connectable in a single run.
    Max strip length
    Maximum length of LED strip connectable without problems.
    Maximum span
    Maximum free span of a suspended LED profile without intermediate supports.
    MCB (miniature circuit breaker)
    Miniature automatic circuit breaker for LED circuits.
    mcd (millicandela)
    Submultiple of the candela (1/1000 cd); used to specify the luminous intensity of individual SMD LEDs.
    MCPCB (Metal Core PCB)
    PCB with metal core for superior thermal dissipation.
    MCPCB assembly
    Assembly of components on metal-core PCB for LEDs.
    MCPCB design
    Design of PCB with metal core for LED dissipation.
    MCPCB thermal performance
    Thermal performance of the metal-core PCB for LEDs.
    Mean beam angle
    Average beam angle of the LED measured at 50% of peak intensity.
    Mean beam candlepower (MBCP)
    Average luminous intensity at the center of the beam of an LED fixture.
    Mean color rendering
    Average color rendering of an LED fixture; see CRI.
    Mean illuminance
    Average illuminance on the target surface of the LED installation.
    Mean lumens
    Average luminous flux during the useful life of the LED.
    Mean luminance
    Average luminance of the LED diffuser surface.
    Mean Time Between Failures (MTBF)
    Mean time between failures; reliability indicator of LED power supplies.
    Mean Well
    Leading manufacturer of switching power supplies for LEDs; series HLG, ELG, LPV, NPF among the most widespread.
    Mean Well APV series
    Mean Well APV series at constant voltage for indoor LEDs.
    Mean Well CEN series
    Mean Well CEN series dimmable for LED street lighting.
    Mean Well CLG series
    Mean Well CLG series at constant current for outdoor LEDs.
    Mean Well ELG-100
    Mean Well ELG power supply from 100W for outdoor LEDs.
    Mean Well ELG-150
    Mean Well ELG power supply from 150W for outdoor LEDs.
    Mean Well ELG-200
    Mean Well ELG power supply from 200W for outdoor LEDs.
    Mean Well ELG-240
    Mean Well ELG power supply from 240W for outdoor LEDs.
    Mean Well ELG-300
    Mean Well ELG power supply from 300W for outdoor LEDs.
    Mean Well ELG-75
    Mean Well ELG power supply from 75W for outdoor LEDs.
    Mean Well ELN series
    Mean Well ELN series dimmable for compact outdoor LEDs.
    Mean Well GST series
    Mean Well GST series desktop with plug for bench LEDs.
    Mean Well HBG series
    Mean Well HBG series for industrial high-bay LED luminaires.
    Mean Well HDR-100
    Mean Well HDR power supply from 100W on DIN rail for LEDs.
    Mean Well HDR-15
    Mean Well HDR power supply from 15W on DIN rail for LEDs.
    Mean Well HDR-150
    Mean Well HDR power supply from 150W on DIN rail for LEDs.
    Mean Well HDR-30
    Mean Well HDR power supply from 30W on DIN rail for LEDs.
    Mean Well HDR-60
    Mean Well HDR power supply from 60W on DIN rail for LEDs.
    Mean Well HEP series
    Mean Well HEP series for harsh environments with advanced protection.
    Mean Well HLG-100
    Mean Well HLG power supply from 100W for professional LEDs.
    Mean Well HLG-120
    Mean Well HLG power supply from 120W for professional LEDs.
    Mean Well HLG-150
    Mean Well HLG power supply from 150W for professional LEDs.
    Mean Well HLG-185
    Mean Well HLG power supply from 185W for professional LEDs.
    Mean Well HLG-240
    Mean Well HLG power supply from 240W for professional LEDs.
    Mean Well HLG-320
    Mean Well HLG power supply from 320W for professional LEDs.
    Mean Well HLG-40
    Mean Well HLG power supply from 40W for professional LEDs.
    Mean Well HLG-480
    Mean Well HLG power supply from 480W for professional LEDs.
    Mean Well HLG-60
    Mean Well HLG power supply from 60W for professional LEDs.
    Mean Well HLG-600
    Mean Well HLG power supply from 600W for professional LEDs.
    Mean Well HLG-80
    Mean Well HLG power supply from 80W for professional LEDs.
    Mean Well HSP series
    Mean Well HSP series high power with PFC for LEDs.
    Mean Well IDLC series
    Mean Well IDLC series at constant current dimmable for LEDs.
    Mean Well IDLV series
    Mean Well IDLV series at constant voltage dimmable for LED strips.
    Mean Well IRM series
    Mean Well IRM series miniaturized and encapsulated for LEDs.
    Mean Well LDH series
    Mean Well LDH series DC-DC step-up converter for LEDs.
    Mean Well LED driver selector
    Mean Well online tool for selecting the appropriate LED driver.
    Mean Well LPH series
    Mean Well LPH series compact constant current for LEDs.
    Mean Well LPV-100
    Mean Well LPV power supply from 100W economical IP67.
    Mean Well LPV-150
    Mean Well LPV power supply from 150W economical IP67.
    Mean Well LPV-20
    Mean Well LPV power supply from 20W economical IP67.
    Mean Well LPV-35
    Mean Well LPV power supply from 35W economical IP67.
    Mean Well LPV-60
    Mean Well LPV power supply from 60W economical IP67.
    Mean Well LRS-100
    Mean Well LRS power supply from 100W enclosed for indoor LEDs.
    Mean Well LRS-150
    Mean Well LRS power supply from 150W enclosed for indoor LEDs.
    Mean Well LRS-200
    Mean Well LRS power supply from 200W enclosed for indoor LEDs.
    Mean Well LRS-350
    Mean Well LRS power supply from 350W enclosed for indoor LEDs.
    Mean Well LRS-50
    Mean Well LRS power supply from 50W enclosed for indoor LEDs.
    Mean Well NES series
    Mean Well NES series enclosed economical for LEDs.
    Mean Well NPF-120
    Mean Well NPF power supply from 120W slim for LEDs.
    Mean Well NPF-200
    Mean Well NPF power supply from 200W slim for LEDs.
    Mean Well NPF-40
    Mean Well NPF power supply from 40W slim for LEDs.
    Mean Well NPF-60
    Mean Well NPF power supply from 60W slim for LEDs.
    Mean Well NPF-90
    Mean Well NPF power supply from 90W slim for LEDs.
    Mean Well OWA series
    Mean Well OWA series with wall adapter for LEDs.
    Mean Well PLP series
    Mean Well PLP series programmable constant current for LEDs.
    Mean Well PSD series
    Mean Well PSD series DC-DC converter for LEDs.
    Mean Well PWM series
    Mean Well PWM series with PWM output for LED strips.
    Mean Well RPS series
    Mean Well RPS series for medical LED applications.
    Mean Well RSP series
    Mean Well RSP series enclosed with PFC high power.
    Mean Well SDR series
    Mean Well SDR series DIN rail with PFC for industrial LEDs.
    Mean Well selector tool
    Online selection tool for Mean Well drivers for LEDs.
    Mean Well UHP-1000
    Mean Well UHP power supply from 1000W ultra-high efficiency for LEDs.
    Mean Well UHP-1500
    Mean Well UHP power supply from 1500W ultra-high efficiency for LEDs.
    Mean Well UHP-200
    Mean Well UHP power supply from 200W ultra-high efficiency for LEDs.
    Mean Well UHP-350
    Mean Well UHP power supply from 350W ultra-high efficiency for LEDs.
    Mean Well UHP-500
    Mean Well UHP power supply from 500W ultra-high efficiency for LEDs.
    Mean Well UHP-750
    Mean Well UHP power supply from 750W ultra-high efficiency for LEDs.
    Mean Well warranty
    Warranty of Mean Well products for professional LED applications.
    Mean Well XLG series
    Mean Well XLG series at constant current with wide range for outdoor LEDs.
    Mean Well XLG-100
    Mean Well XLG power supply from 100W at constant current for LEDs.
    Mean Well XLG-150
    Mean Well XLG power supply from 150W at constant current for LEDs.
    Mean Well XLG-200
    Mean Well XLG power supply from 200W at constant current for LEDs.
    Mean Well XLG-240
    Mean Well XLG power supply from 240W at constant current for LEDs.
    Mean Well XLG-25
    Mean Well XLG power supply from 25W at constant current for LEDs.
    Mean Well XLG-320
    Mean Well XLG power supply from 320W at constant current for LEDs.
    Mean Well XLG-50
    Mean Well XLG power supply from 50W at constant current for LEDs.
    Mean Well XLG-75
    Mean Well XLG power supply from 75W at constant current for LEDs.
    Measurement accuracy
    Accuracy of photometric and colorimetric LED measurements.
    Measurement instrument
    Measuring instrument for LED parameters: luxmeter, spectrometer, thermal camera.
    Measurement point
    Specific point where LED illuminance is measured.
    Measurement protocol
    Standardized protocol for measuring LED performance.
    Measurement report
    Report of measurements performed on the installed LED installation.
    Measurement uncertainty
    Uncertainty of LED photometric measurements.
    Measuring tape
    Measuring tape for measuring lengths in LED installation.
    Meccanica quantistica
    Physical theory underlying the operation of the LED chip.
    Mechanical assembly
    Mechanical assembly of the LED profile components.
    Mechanical connection
    Mechanical connection between the LED profile and the mounting surface.
    Mechanical coupling
    Mechanical coupling between two sections of LED profile.
    Mechanical design
    Mechanical design of the LED profile and accessories.
    Mechanical drawing
    Mechanical drawing of the LED profile with dimensions and tolerances.
    Mechanical fixing
    Fixing of the LED profile via mechanical means (screws, clips, rivets).
    Mechanical interlock
    Mechanical lock preventing opening during operation.
    Mechanical load
    Mechanical load on the LED profile: weight, wind, snow, vibrations.
    Mechanical protection
    Mechanical protection of the LED strip via profile and diffuser.
    Mechanical seal
    Mechanical seal of the LED profile for IP protection.
    Mechanical specification
    Mechanical specifications of the LED profile: dimensions, weight, material.
    Mechanical strength
    Mechanical strength of the LED profile to loads and stresses.
    Mechanical stress
    Mechanical stress on the LED profile due to mounting, vibrations, or loads.
    Mechanical tolerance
    Dimensional tolerances of the extruded aluminum LED profile.
    Media facade
    Multimedia facade with integrated LEDs for video and graphic content.
    Media server LED
    Media server generating video content for LED matrices.
    Medical grade cable
    Cable with medical-grade insulation for LED fixtures in healthcare settings.
    Medical lighting
    LED lighting for healthcare environments; high CRI and specific standards.
    Medical lighting standard
    Lighting standard for healthcare environments with LEDs.
    Medium density strip
    LED strip with 60-120 LED/m; for general lighting.
    Medium power LED
    Mid-power LED (0.2-0.5W); the most common type in strips.
    Meeting room LED
    LED lighting for meeting rooms; multiple scenes and dimmable control.
    Melanopic equivalent daylight illuminance (MEDI)
    Metric for evaluating the circadian effect of LED light.
    Melanopico (fattore)
    Ratio measuring the effectiveness of LED light in stimulating circadian receptors (ipRGC ganglion cells).
    Membrane switch
    Membrane switch for controlling LED systems.
    Memory backup
    Battery or capacitor maintaining the settings of the LED controller.
    Memory chip
    Memory chip in the LED controller for saving scenes and effects.
    Memory function
    Capability of the LED controller to memorize the last state before shutdown.
    Memory recall
    Recall of settings stored by the LED controller.
    Memory reset
    Reset of the LED controller memory to factory settings.
    Mensa LED
    LED lighting for canteens and refectories; uniformity and comfort.
    Menu display LED
    LED display for menu visualization in restaurants and bars.
    Mercato dell'illuminazione LED
    Commercial sector of LED products at national and international levels.
    Mercury content
    Mercury content; LEDs are free of it unlike fluorescents.
    Mercury lamp replacement
    Replacement of mercury vapor lamps with LEDs.
    Mercury-free
    Absence of mercury; advantage of LEDs over fluorescent lamps.
    Mercury-free declaration
    Declaration of the absence of mercury in LED products.
    Mesh (rete a maglia)
    Wireless mesh network topology where each node can communicate with others; used in Zigbee and Bluetooth Mesh for LEDs.
    Mesh control system
    LED control system based on a wireless mesh network.
    Mesh gateway
    Gateway for Zigbee or Bluetooth mesh networks for LED control.
    Mesh network configuration
    Configuration of the mesh network for distributed LED control.
    Mesh network range
    Range of the mesh network for wireless LED control.
    Mesh topology
    Mesh network topology for communication between LED devices.
    Mesopico (visione)
    Vision in intermediate light conditions; transition between photopic and scotopic.
    Messa in opera LED
    Physical installation of the LED installation on site.
    Messa in servizio LED
    Startup and configuration of the LED installation after installation.
    Metal bracket
    Metal bracket for fixing LED profiles and fixtures.
    Metal channel
    Metal channel for housing the LED strip.
    Metal clip
    Metal clip for fixing the LED profile.
    Metal conduit
    Metal tube for protecting LED cables.
    Metal core PCB (MCPCB)
    PCB with metal core for maximum thermal dissipation.
    Metal finish
    Metallic finish of the LED profile: chrome, nickel, brass.
    Metal halide LED replacement
    Replacement of metal halide lamps with LEDs.
    Metal halide replacement
    Replacement of metal halide lamps with LEDs.
    Metal housing
    Metal enclosure of the LED power supply or fixture.
    Metal oxide varistor (MOV)
    Metal oxide varistor for surge protection of the LED driver.
    Metal stamping
    Metal stamping for the production of LED brackets and clips.
    Metallic tape
    Metallic adhesive tape for supplementary thermal dissipation of the LED strip.
    Metamerism index
    Index quantifying the metamerism between two LED sources.
    Metamerismo
    Two colors appear the same under one source and different under another.
    Meter box
    Meter box; starting point of the power supply for LED installations.
    Metering device
    Device for measuring the energy consumption of the LED installation.
    Metering point
    Measurement point of the energy consumed by the LED installation.
    Metro a nastro digitale
    Digital tape measure for precise measurements in LED installation.
    Metro di strip LED necessario
    Quantity of LED strip in linear meters required by the project.
    Metro laser
    Laser distance meter for sizing the LED installation.
    Metro lineare di strip
    Unit of measurement for ordering LED strips; price expressed per meter.
    Metro lineare profilo LED
    Unit of measurement for ordering LED profiles; price per meter.
    Metro lineare strip LED
    Unit of measurement for ordering LED strips; price per meter.
    Metrology (LED)
    Science of measurement applied to photometric and colorimetric LED parameters.
    Mezzo attivo
    Region of the semiconductor LED where stimulated or spontaneous emission occurs.
    MHz (Megahertz)
    Switching frequency of LED switching drivers (typically 50-500 kHz).
    Mica (isolante)
    Mica thermal insulator used in high-temperature LED components.
    Mica insulator
    Mica insulator for thermal separation in LED fixtures.
    Micro channel
    Micro-channel in the substrate for liquid cooling of high-power LEDs.
    Micro connector
    Miniaturized connector for ultra-thin LED strips.
    Micro controller unit (MCU)
    Microcontroller in the LED controller for managing effects and protocols.
    Micro dimmer
    Miniaturized dimmer for installation in wall boxes or behind switches.
    Micro driver
    Miniaturized LED driver for installation in extremely small spaces.
    Micro LED
    Emerging technology with micrometric LEDs for ultra-compact displays and lighting.
    Micro LED display
    Display with micrometric LEDs for very high resolution and brightness.
    Micro lens array
    Matrix of micro-lenses for LED beam control on strips.
    Micro lens optic
    Optics with micro-lenses for precise LED beam control.
    Micro motion sensor
    Micro-motion sensor for activating LEDs in small spaces.
    Micro prismatic diffuser
    Diffuser with micro-prismatic structures for beam control and anti-glare.
    Micro profile
    LED profile with dimensions smaller than 10 mm for invisible installations.
    Micro switch
    Microswitch for activating LEDs in furniture and doors.
    Micro USB connector
    Micro-USB connector for configuration and power supply of LED controllers.
    Microcontrollore
    Programmable chip integrated into LED controllers to manage effects, protocols, and dimming logic.
    Micrometer (μm)
    Microscopic unit; for the dimensions of LED dies.
    Microprocessor
    Processor in LED controllers for managing effects and protocols.
    Microwave motion detector
    Microwave motion detector for LED activation.
    Microwave sensor
    Microwave sensor for presence detection through walls and materials.
    Mid-power LED chip
    Mid-power LED chip (0.2-0.5W); the most used in professional strips.
    Mid-span connection
    Intermediate connection along the LED strip for additional power.
    Middle feed
    Powering the LED strip from the center point to halve the voltage drop.
    Middle point feed
    Powering the LED strip from the center point to halve the voltage drop.
    Midnight dimming
    Automatic dimming of LEDs at midnight for energy savings.
    Miglior rapporto qualità prezzo LED
    LED product offering the best performance for the price.
    Miglioramento del comfort LED
    Optimization of the LED installation for the well-being of occupants.
    Miglioramento dell'efficienza LED
    Optimization of the LED installation to reduce consumption.
    Miglioramento estetico LED
    Upgrade of LED lighting for a more modern look.
    Migration test
    Test for the migration of substances from the LED material; for food applications.
    Mil spec
    Military specifications; compliant LED fixtures for extreme environments.
    Mildew resistant
    LED profile material resistant to mold formation.
    Military specification LED
    LED compliant with military specifications for extreme environments.
    Milky diffuser
    Milky white diffuser; synonymous with opal diffuser.
    Milky lens
    Milky lens or diffuser for uniform LED light; see Opal.
    Milliamp (mA)
    Thousandth of an Ampere; unit for the driving current of LEDs.
    Milliwatt (mW)
    Thousandth of a Watt; unit for the power of individual LEDs or indicators.
    Min dimming percentage
    Minimum dimming percentage achievable by the LED system.
    Min load (dimmer)
    Minimum load required for the stable operation of a dimmer with LEDs.
    Min/max temperature
    Operating temperature range of the LED system.
    Mine lighting LED
    LED lighting for mines and tunnels; ATEX and explosion-proof.
    Mini connector
    Miniaturized connector for thin LED strips and small spaces.
    Mini controller
    Compact LED controller for small installations.
    Mini dimmer
    Miniaturized dimmer for installation in small boxes.
    Mini driver
    Miniaturized LED power supply for extremely limited spaces.
    Mini LED chip
    Small-sized LED chip (100-300 micrometers) for high density.
    Mini neon flex
    LED neon flex with a reduced section for tight curves and details.
    Mini profile
    Miniaturized LED profile with width less than 10 mm.
    Mini profilo
    Very small LED profile (width ≤10 mm) for discreet installations in furniture or under shelves.
    Mini spot LED
    Small LED spotlight for point accent lighting.
    Miniature circuit breaker
    Compact automatic circuit breaker for LED circuits.
    Miniature fuse
    Miniature fuse for the protection of LED circuits.
    Miniature LED
    Extremely small LED; for micro-applications.
    Miniature relay
    Miniaturized relay for controlling LED circuits.
    Minimum bend radius
    Minimum bending radius of the LED strip without damaging it.
    Minimum dimming level
    Minimum brightness level achievable by the LED system.
    Minimum load requirement
    Minimum load required for the correct operation of the LED dimmer.
    Minimum starting temperature
    Minimum temperature at which the LED turns on correctly.
    Mirror clip mount
    Clip mounting of perimeter LED profiles on mirrors.
    Mirror effect profile
    LED profile with mirror finish for aesthetic integration.
    Mirror finish aluminum
    Mirror-polished aluminum for internal reflectors of LED profiles.
    Mirror LED profile
    LED profile specifically for perimeter lighting of mirrors.
    Mirror light controller
    Controller dedicated to LED lighting of bathroom mirrors.
    Mirror lighting
    Perimeter or rear lighting of mirrors via LED profiles.
    Mirror sensor dimmer
    Touch dimmer integrated into the LED profile of the mirror.
    Miscelazione del colore
    Process of combining LEDs of different colors (RGB/RGBW) to obtain the desired shade.
    Miscelazione ottica nel profilo
    Combination of light from individual LEDs in the profile for uniformity.
    Miscelazione RGB nel profilo
    Process of mixing R, G, B colors in the space between strip and diffuser.
    Mismatch (cromatico)
    Visible color difference between LED strips from different batches.
    Mismatch correction
    Correction of color differences between LED strips from different batches.
    Mismatch loss
    Efficiency loss due to differences between LEDs in the same circuit.
    Missione aziendale LED
    Corporate mission of the LED company to offer quality sustainable lighting.
    Misura del profilo LED
    Dimensions of the cross-section of the LED profile.
    Misura della strip LED
    Width and thickness of the LED strip for compatibility with the profile.
    Miter cut
    45-degree cut of the LED profile for corner joints.
    Miter joint
    45-degree joint between two LED profiles to form a 90-degree angle.
    Miter saw
    Miter saw for precise cutting of aluminum LED profiles.
    Mixed beam angle
    Beam with different angles combined for versatile lighting.
    Mixed lighting
    Combination of LED light with other sources (natural, fluorescent) in the same environment.
    Mixed use lighting
    LED lighting for multifunctional environments with adaptable scenes.
    Mobile app control
    Control of LED lighting via a smartphone application.
    Mobile app dimming
    Dimming of LED lighting via a smartphone application.
    Mobile control
    Control of LED lighting via smartphone or tablet.
    Mobile lighting tower
    Mobile LED lighting tower for construction sites and events.
    Mock-up installation
    Test installation of an LED sample to verify the effect.
    Mockup
    Test installation sample to evaluate the lighting effect before final production.
    Modalità assenza
    Presence simulation with random switching on of LEDs when away from home.
    Modalità cinema LED
    Preset lighting scene for movie viewing: warm and low light.
    Modalità di funzionamento LED
    Operating state of the LED system: on, off, dimmed, emergency.
    Modalità di installazione profilo
    Mounting method of the LED profile: recessed, surface, suspended.
    Modalità festa LED
    Preset lighting scene for parties: dynamic colors and music.
    Modalità lettura LED
    Preset lighting scene for reading: neutral and direct light.
    Modalità notte LED
    Preset lighting scene for night: minimum warm light.
    Modalità relax LED
    Preset lighting scene for relaxation: warm and soft light.
    Modalità risveglio LED
    Dawn simulation with gradual increase in brightness and CCT.
    Modanatura luminosa
    Architectural molding with integrated LED strip.
    Modbus
    Industrial protocol used in some LED control systems.
    Modello 3D del profilo LED
    3D CAD file of the LED profile for architectural design.
    Modello BIM del profilo LED
    BIM object of the LED profile for integration into the building model.
    Modello del profilo LED
    Product code identifying the specific type of LED profile.
    Modello dell'alimentatore LED
    Product code identifying the specific type of LED power supply.
    Modello della strip LED
    Product code identifying the specific type of LED strip.
    Modular ceiling system
    Modular suspended ceiling system with integration of LED profiles.
    Modular connector
    Standardized connector for modular LED systems.
    Modular controller
    LED controller with expandable modules for additional features.
    Modular design
    Design of LED systems with interchangeable and configurable components.
    Modular driver system
    Modular and configurable LED power supply system.
    Modular lighting fixture
    Composable LED fixture with interchangeable modules.
    Modular power supply
    Power supply with add-on power modules for scalability.
    Modular profile system
    Modular LED profile system connectable for flexible configurations.
    Modular track
    Modular track for configurable LED fixtures.
    Modular wiring
    Prefabricated modular wiring for quick installation of the LED system.
    Module connector
    Connector for joining modular LED components.
    Module replacement
    Replacement of the LED source module in the fixture for maintenance.
    Modulo di alimentazione LED
    Complete power supply unit for a segment of the LED installation.
    Modulo di emergenza
    Circuit with rechargeable battery that powers the LEDs during blackout for a defined time (1-3 hours).
    Modulo di emergenza autonomo
    Module with battery and circuit for autonomous LED operation in emergency.
    Modulo LED
    Small board with one or more LEDs and integrated optics; used for signs, backlighting, and point lighting.
    Moisture barrier
    Moisture barrier applied to LED strips and components.
    Moisture barrier bag
    Moisture barrier bag for storing LED strips.
    Moisture indicator
    Moisture indicator in the packaging of the LED strip.
    Moisture ingress
    Moisture penetration into the LED profile or fixture.
    Moisture protection
    Protection of LED components from moisture via IP or coatings.
    Moisture resistant adhesive
    Moisture-resistant adhesive for LED strips in humid environments.
    Moisture seal
    Sealing against moisture for protection of LED connections.
    Moisture sensor
    Moisture sensor for managing LED lighting in critical environments.
    Mold (stampo)
    Mold for the production of lenses, diffusers, and plastic components for LEDs.
    Molded connector
    Molded connector with integrated sheath; resistant and waterproof.
    Molded end cap
    Molded plastic end cap for LED profiles.
    Molla di fissaggio a incasso
    Spring clip for recessed fixing of LED profiles in the suspended ceiling.
    Monitoring dashboard
    Monitoring dashboard for remote control of the LED installation.
    Monitoring software
    Software for monitoring the performance and consumption of the LED installation.
    Mono LED strip
    Monochromatic single-color or fixed-temperature LED strip.
    Monochromatic LED
    LED emitting a single wavelength; red, green, blue, amber.
    Monolocale LED
    LED lighting scheme for studios with multiple scenes.
    Montaggio a clip
    Fixing system of the LED profile via metal or plastic clips screwed to the surface.
    Montaggio a clip del profilo
    Technique for fixing the LED profile via clips screwed to the surface.
    Montaggio a colla del profilo
    Technique for fixing the LED profile with structural adhesive.
    Montaggio a incasso
    Installation of the LED profile inside a recess or prepared cavity in the surface.
    Montaggio a incasso del profilo
    Insertion of the LED profile into a recess in the surface.
    Montaggio a sospensione
    Fixing of the LED profile with steel cables or rigid rods for suspension from the ceiling.
    Montaggio a sospensione del profilo
    Suspension of the LED profile from the ceiling with steel cables.
    Montaggio a vista (surface mount)
    Installation of the LED profile directly on the surface without recess; the profile remains visible.
    Montaggio a vista del profilo
    Application of the LED profile directly on the visible surface.
    Montaggio del diffusore
    Insertion of the cover into the guide of the LED profile.
    Montaggio dell'end cap
    Application of the end cap to the ends of the LED profile.
    Montaggio della strip nel profilo
    Procedure for inserting the LED strip into the seat of the profile.
    Montaggio magnetico
    System using built-in magnets to fix the LED strip or profile to metal surfaces.
    Montaggio rapido profilo LED
    Quick installation of the LED profile with snap-on clips.
    Montaggio senza attrezzi
    Installation of the LED profile with snap-on systems without tools.
    Monument lighting LED
    LED lighting of monuments and urban works of art.
    Mood board
    Visual inspiration board for the LED lighting project.
    Mood lighting
    Atmospheric LED lighting; color and intensity to create moods.
    Moonlight mode
    LED mode with minimum brightness and warm CCT; simulates moonlight.
    Morsettiera
    Terminal block for orderly connection of power and signal cables.
    Morsetto di prova
    Terminal for temporary connection during LED installation testing.
    Mosaic LED
    Artistic composition with LED modules of different colors and intensities.
    Moschea LED
    LED lighting for mosques; respect for architecture and atmosphere.
    MOSFET di commutazione
    Switching transistor in the switching LED driver.
    MOSFET di potenza
    Power transistor for switching in the LED driver.
    Motion activated lighting
    LED lighting activated upon motion detection.
    Motion activated strip
    LED strip with integrated motion sensor.
    Motion detection range
    Range of the motion sensor for LED activation.
    Motion detector ceiling mount
    Ceiling-mounted motion sensor for LED control.
    Motion detector wall mount
    Wall-mounted motion sensor for LED control.
    Motion sensor dimming
    Automatic dimming based on the presence of people detected by sensors.
    Motion sensor LED strip
    LED strip with integrated motion sensor in the profile.
    Motion sensor range
    Maximum range of the motion sensor for LED activation.
    Motion sensor sensitivity
    Adjustable sensitivity of the motion sensor for LEDs.
    Motor driven dimmer
    Motorized dimmer for automatic LED brightness adjustment.
    Motor protection
    Protection of motors in LED cooling fans.
    Mount type
    Type of mounting of the LED profile: recessed, surface, suspended, angled.
    Mounting adhesive
    Adhesive used to fix the LED profile to the surface.
    Mounting adhesive tape
    Double-sided tape for mounting the LED profile on the surface.
    Mounting angle
    Mounting angle of the LED profile relative to the surface.
    Mounting base plate
    Base plate for mounting the LED power supply.
    Mounting bracket
    Mounting bracket for LED profiles and fixtures.
    Mounting center distance
    Distance between the centers of the fixing holes of the LED profile.
    Mounting channel
    Mounting channel into which the LED profile is inserted.
    Mounting clip spacing
    Recommended distance between fixing clips along the LED profile.
    Mounting depth
    Depth required to install a recessed LED profile.
    Mounting detail
    Construction detail of the LED profile mounting on the surface.
    Mounting dimension
    Dimensions for mounting the LED profile.
    Mounting flange
    Mounting flange of the LED profile for fixing with screws.
    Mounting hardware kit
    Hardware kit for mounting the LED profile.
    Mounting height
    Height at which the LED fixture is installed relative to the work plane.
    Mounting hole pattern
    Pattern of fixing holes on the LED profile.
    Mounting instruction manual
    Instruction manual for mounting the LED profile and strip.
    Mounting method selection
    Choice of mounting method based on the LED application.
    Mounting option
    Available mounting option for the LED profile.
    Mounting plate
    Fixing plate for LED power supplies and controllers.
    Mounting point
    Fixing point of the LED profile on the surface.
    Mounting position
    Mounting position of the LED fixture: ceiling, wall, floor.
    Mounting rail
    Mounting rail for linear LED profiles.
    Mounting screw
    Fixing screw for profiles, clips, and LED accessories.
    Mounting spring
    Fixing spring for recessed LED profiles in the suspended ceiling.
    Mounting surface
    Surface on which the LED profile is installed (wood, metal, drywall).
    Mounting surface preparation
    Preparation of the surface for mounting the LED profile.
    Mounting template drawing
    Drawing of the mounting template for positioning the LED profile.
    Mounting tolerance
    Allowed tolerance in positioning the LED profile during mounting.
    Mounting track system
    Guide system for sliding mounting of LED profiles.
    Moving head LED
    Motorized moving head LED for stage and dynamic architectural lighting.
    MQTT
    IoT messaging protocol for smart LED control.
    MTBF (alimentatore)
    Mean time between failures of the power supply; reliability indicator.
    Mullion lighting
    LED lighting integrated into mullions of curtain walls.
    Mullion mount LED
    Mounting of LED strips on mullions of glass curtain walls.
    Multi-beam optic
    Optics producing multiple light beams from a single LED.
    Multi-beam reflector
    Reflector producing multiple light beams from a single LED source.
    Multi-channel amplifier
    Multi-channel amplifier for distributing the LED signal.
    Multi-channel controller
    Controller with independent outputs to manage different LED strips separately.
    Multi-chip LED array
    Array of multiple LED chips on a common substrate for high brightness.
    Multi-chip module
    Module with multiple LED chips of different colors for mixing.
    Multi-circuit track
    Electrified track with multiple independent circuits for different groups of LED spotlights.
    Multi-color effect
    Multi-color effect on RGB or addressable LED strips.
    Multi-die LED
    LED package containing multiple dies for high luminous flux.
    Multi-driver configuration
    LED installation with multiple power supplies for redundancy or zoning.
    Multi-function controller
    LED controller with multiple functions: dimming, color, scenes, timer.
    Multi-level dimming
    Dimming at multiple preset levels for LED control.
    Multi-line installation
    Installation of multiple parallel rows of LED profiles.
    Multi-mode operation
    LED fixture with different selectable operating modes.
    Multi-output driver
    LED driver with multiple outputs to power different groups.
    Multi-point feeding
    Powering the LED strip from multiple points for voltage uniformity.
    Multi-purpose room LED
    LED lighting for multipurpose rooms with multiple scenes.
    Multi-row strip
    LED strip with two or more parallel rows of chips for high flux.
    Multi-sensor
    Combined sensor (motion + light + temperature) for LED automation.
    Multi-story building LED
    LED lighting for multi-story buildings with centralized management.
    Multi-string driver
    Driver powering multiple LED strings in parallel.
    Multi-tap transformer
    Transformer with multiple taps for different LED output voltages.
    Multi-zone controller
    LED controller managing independent zones with different scenes.
    Multi-zone dimmer
    Dimmer with independent channels for different LED zones.
    Multi-zone sensor
    Sensor covering multiple zones for independent LED control.
    Multicolor
    LED strip capable of emitting multiple colors, either via RGB mixing or dedicated colored LEDs.
    Multimetro digitale
    Instrument for measuring voltage, current, and resistance in the LED circuit.
    Multizone
    LED control system allowing independent management of different areas (zones).
    Municipal LED
    LED lighting for municipal public spaces: streets, parks, squares.
    Mura (difetto)
    Visible unevenness in brightness or color on an LED surface.
    Museo LED
    LED lighting for museums; CRI>95, low UV, and protection.
    Museum application
    LEDs with low UV/IR emission for artwork conservation.
    Museum display LED
    LED lighting for museum cases and showcases; low UV and high CRI.
    Museum quality LED
    LED with CRI above 95 and very low UV emission for museums.
    Mushroom style LED
    Mushroom-shaped LED fixture for garden lighting.
    Music hall LED
    LED lighting for concert halls and auditoriums.
    Music reactive controller
    LED controller synchronizing effects to music.
    Music sync LED strip
    Addressable LED strip reacting to music in real time. ↑ Back to top

    N

    Nail gun
    Nail gun for quick fixing of LED clips on wood.
    Nail mount
    Mounting with nails of the LED profile on wooden surfaces.
    Nail plate
    Metal plate for fixing LED profiles with nails on wood.
    Nail plate protector
    Metal plate protecting LED cables from nails in wood.
    Name plate data
    Technical data on the nameplate of the LED power supply.
    Name plate rating
    Nominal data on the nameplate of the LED power supply.
    Nameplate
    Label with technical data applied to LED power supplies and fixtures.
    Nano coating
    Nanotechnology hydrophobic coating on outdoor LED profiles.
    Nano LED
    Nanometric-sized LED; research technology for future displays.
    Nano particle coating
    Coating with nanoparticles for anti-fouling properties on LED profiles.
    Nano profilo
    Miniaturized LED profile with a cross-section of a few millimeters; for applications in furniture and architectural details.
    Nano-texture
    Surface nanostructure on LED diffusers for advanced optical control.
    Nanometer (nm)
    Billionth of a meter; unit of measurement for the wavelength of LED light.
    Narrow angle LED
    LED with a narrow emission angle for focused lighting.
    Narrow beam
    Narrow beam (≤15°); with collimating optics on LED sources.
    Narrow channel profile
    LED profile with a narrow channel for 5-8 mm strips.
    Narrow distribution
    Concentrated light distribution with a narrow angle.
    Narrow profile
    LED profile with reduced width for installations in limited spaces.
    Narrow profile LED
    LED profile with reduced width for installations in limited spaces.
    Narrow spectrum LED
    LED with a narrow emission spectrum; monochromatic.
    Nastro biadesivo termoconduttivo
    Tape conducting heat from the LED strip to the profile.
    Nastro biadesivo VHB
    3M Very High Bond tape for permanent fixing of LED strips.
    Nastro di rame
    Copper adhesive tape for EMI shielding of LED circuits.
    Nastro isolante
    PVC tape for insulating LED electrical connections.
    Nastro LED
    Synonym for LED strip; flexible circuit with mounted LEDs.
    Nastro LED adesivo
    LED strip with double-sided tape on the back for direct mounting.
    Nastro luminoso
    See LED strip. Colloquial term for LED strip.
    Nastro per mascheratura
    Masking tape to protect surfaces during LED installation.
    Nastro termico
    Heat-resistant tape for masking during LED soldering.
    Natural anodized finish
    Natural anodized finish maintaining the silver color of aluminum.
    Natural anodizing
    Natural anodizing of aluminum maintaining the silvery color.
    Natural convection cooling
    Cooling by natural convection without a fan; standard for LED profiles.
    Natural cooling
    Natural cooling by convection without forced ventilation; standard for LED profiles.
    Natural daylight LED
    LED simulating the spectrum of natural daylight.
    Natural light sensor
    Natural light sensor for daylight harvesting of the LED installation.
    Natural light simulation
    Simulation of natural light with tunable white and full-spectrum LEDs.
    Natural ventilation
    Natural ventilation contributing to the thermal dissipation of LED profiles.
    Natural white (4000K)
    See Natural white. Balanced temperature for multifunctional environments.
    Natural white LED strip
    4000K natural white LED strip for balanced environments.
    Nave industriale LED
    LED lighting for industrial warehouses; high bay and sensors.
    Navigation aid
    Navigation aid with LEDs for marine and airport environments.
    Navigation aid LED
    LED light for maritime and aeronautical navigation aid.
    Navigation light LED
    LED navigation light for boats and airports.
    NB-IoT LED
    LED controlled via narrowband IoT network for smart cities.
    Near field communication (NFC)
    Short-range communication for configuring LED drivers.
    Near infrared LED
    LED emitting in the near infrared (700-850 nm) for sensors.
    Near-UV LED
    LED emitting in the near-ultraviolet region (380-400 nm).
    Needle nose plier
    Long-nose pliers for precision work on LED strips.
    Negative bus bar
    Negative busbar for distributing the ground in LED circuits.
    Negative lead
    Negative conductor (-) in the power cable of the LED strip.
    Negative temperature coefficient
    Characteristic of NTC thermistors used for LED thermal monitoring.
    Negative terminal
    Negative terminal (-) of the power supply or LED strip.
    Negotiated bid
    Negotiated offer for the supply of an LED installation.
    Negozio LED
    Physical or online store specialized in LED products.
    Neon bend tool
    Tool for bending LED neon flex with precision.
    Neon channel letter
    Luminous letter made with LED neon flex for signs.
    Neon effect
    Visual effect simulating the appearance of neon tubes with LED strips or neon flex.
    Neon flex 360
    Neon flex with 360-degree emission for a complete tubular effect.
    Neon flex accessories
    Accessories for neon flex: clips, end caps, connectors, power supply.
    Neon flex adapter
    Power connector specifically for LED neon flex.
    Neon flex adhesive
    Specific adhesive for fixing LED neon flex.
    Neon flex bend radius
    Minimum bending radius of the neon flex without damaging it.
    Neon flex bracket
    Fixing bracket specifically for LED neon flex.
    Neon flex channel
    Mounting profile for LED neon flex on flat surfaces.
    Neon flex clip
    Fixing clip dedicated to LED neon flex.
    Neon flex color
    Color of the LED neon flex: white, RGB, monochromatic.
    Neon flex connector
    Specific connector for joints and power supply of LED neon flex.
    Neon flex controller RGB
    Specific controller for RGB LED neon flex with color change.
    Neon flex cutter
    Tool for precise cutting of LED neon flex.
    Neon flex cutting point
    Predefined cutting point on the LED neon flex.
    Neon flex diffuser
    Diffusing sleeve of the neon flex that uniformizes the light.
    Neon flex dome
    Neon flex with a semicircular section with 180° emission.
    Neon flex driver
    Power supply specifically for LED neon flex.
    Neon flex end cap
    Sealed end cap for LED neon flex.
    Neon flex flat-top
    Neon flex with a flat rectangular section; for flat surfaces.
    Neon flex installation guide
    Installation guide for LED neon flex.
    Neon flex IP67
    Neon flex with IP67 protection for outdoor installations.
    Neon flex IP68
    Neon flex with IP68 protection for underwater installations.
    Neon flex junction
    Junction between two sections of LED neon flex.
    Neon flex LED
    Flexible silicone tube encasing an LED strip to simulate the appearance of traditional neon tubes.
    Neon flex letter
    Luminous letter made with LED neon flex.
    Neon flex mini
    Reduced-section version of neon flex, for tighter curves and compact installations.
    Neon flex mounting channel
    Mounting channel specifically for LED neon flex.
    Neon flex mounting track
    Mounting guide for LED neon flex.
    Neon flex per esterni
    LED neon flex with IP67 protection for outdoor installations.
    Neon flex per insegne
    LED neon flex used for making luminous signs.
    Neon flex per interni
    IP20 LED neon flex for decorative indoor installations.
    Neon flex per lettere
    LED neon flex for making individual luminous letters.
    Neon flex per scritte
    LED neon flex for customized luminous writings.
    Neon flex power feed
    Power connector for LED neon flex.
    Neon flex profilo di montaggio
    Mounting channel specifically for fixing LED neon flex.
    Neon flex retroilluminazione
    LED neon flex used for backlighting panels and signs.
    Neon flex RGB
    RGB color-changing LED neon flex.
    Neon flex RGBW
    Neon flex with four channels for colors and white.
    Neon flex side-bend
    Neon flex designed to bend sideways rather than up/down; for writings and shapes on flat surfaces.
    Neon flex sign
    Luminous sign made with LED neon flex.
    Neon flex silicone
    Neon flex made of high-quality silicone for flexibility and durability.
    Neon flex specification
    Technical specifications of the LED neon flex: power, CCT, IP, dimensions.
    Neon flex square
    Neon flex with a square section for a geometric effect.
    Neon flex taglio a misura
    Cutting service of LED neon flex to the desired length.
    Neon flex to strip adapter
    Adapter for connecting LED neon flex to a standard strip.
    Neon flex top-bend
    Standard neon flex bending upwards and downwards.
    Neon flex tunable white
    LED neon flex with adjustable color temperature.
    Neon replacement
    Replacement of traditional neon tubes with LED neon flex.
    Neon replacement LED
    Strip or LED neon flex to replace traditional neon tubes.
    Neon sign LED
    Luminous sign made with LED neon flex instead of traditional neon tubes.
    Neoprene (guarnizione)
    Synthetic rubber for IP gaskets of LED profiles.
    Nest (alloggiamento)
    Seat in the LED profile accommodating the strip and diffuser.
    Net metering (LED)
    Energy savings from LED lighting contributing to the building's energy balance.
    Net zero building
    Net-zero building where LEDs contribute to efficiency.
    Net zero energy
    Net-zero energy building; LED lighting contributes.
    Network address
    Network address of an LED device in an IP system.
    Network address assignment
    Assignment of network addresses to LED devices.
    Network architecture
    Architecture of the LED control network: topology, protocols.
    Network bridge
    Device connecting two different LED control networks.
    Network cable
    Network cable for transporting Art-Net/sACN signals for LEDs.
    Network commissioning
    Configuration of the LED control network during commissioning.
    Network configuration
    Configuration of the LED control network (addresses, groups, scenes).
    Network controller
    LED controller with network connectivity for remote management.
    Network device
    Device connected to the LED control network.
    Network diagnostics
    Diagnostics of the LED control network for fault identification.
    Network interface
    Network interface of the LED controller for Ethernet or Wi-Fi connection.
    Network latency
    Delay in communication between the controller and LED devices on the network.
    Network management
    Management of the LED control network with dedicated software.
    Network monitoring
    Monitoring of the LED control network for performance and faults.
    Network protocol
    Communication protocol for controlling LED installations on a network.
    Network protocol stack
    Stack of communication protocols for LED control on a network.
    Network security
    Security of the LED control network: encryption and authentication.
    Network switch
    Network switch for distributing the LED control signal.
    Network topology design
    Design of the topology of the LED control network.
    Neutral conductor
    Neutral conductor of the network; connected to the input of the LED power supply.
    Neutral density filter
    Optical filter reducing brightness without altering color; for LED testing.
    Neutral position
    Neutral position of a dimmer or LED controller; no active adjustment.
    Neutral white LED
    Neutral white LED (4000-4500K); the most balanced shade.
    Neutral wire
    Neutral conductor of the network; required for some smart LED dimmers.
    New build lighting
    LED lighting designed for a building under construction.
    New construction LED
    LED lighting for new constructions with integration from the project.
    Newsletter LED
    Periodic communication with news and offers on LED products.
    NFC commissioning
    Configuration of the LED driver via NFC communication without power.
    NFC tag
    NFC tag applied to the LED fixture for configuration and identification.
    Nicchia a muro LED
    Wall recess with integrated LED lighting for decoration.
    Nicchia da bagno LED
    Bathroom niche with LED strip for lighting products and objects.
    Nicchia illuminata
    Wall recess with LED strip for decorative effect.
    Nicchia luminosa
    Architectural recess with integrated LED strip for accent light.
    Nicchia per strip LED
    Recess in the wall or furniture for housing the LED strip.
    Nichia
    See "LED Nichia". Japanese manufacturer of LED chips, leader in phosphor technology.
    Nichia 757
    Nichia 757 series LED chip; one of the most efficient SMDs for LED strips.
    Nichia E21A
    Nichia E21A LED chip with very high CRI for professional strips.
    Nichia Optisolis
    Nichia Optisolis series with a spectrum similar to sunlight.
    Nickel finish
    Nickel finish on LED profiles for aesthetics and resistance.
    Nickel plating
    Nickel coating of contacts to prevent oxidation.
    Nido d'ape (griglia)
    Honeycomb anti-glare structure for LED fixtures.
    Night dimming
    Automatic reduction of LED brightness during night hours.
    Night dimming schedule
    Programming of nighttime dimming of outdoor LED lighting.
    Night light mode
    LED mode with minimum brightness and warm CCT for night hours.
    Night mode
    LED configuration with reduced and warm light for nighttime comfort.
    Night mode automatico
    Night mode automatically activating based on time or ambient light.
    Night mode LED
    Mode with minimum and warm light for nighttime comfort.
    Night shift lighting
    LED lighting for night shifts; warm CCT and reduced intensity.
    Night sky friendly
    LED lighting respecting the night sky; emission only downwards.
    Night sky protection
    LED lighting designed to minimize light pollution of the night sky.
    Night vision compatible
    LED with a spectrum that does not compromise night vision; red or amber.
    Night vision preservation
    Red or amber LED lighting preserving night vision.
    NiMH accumulator
    Nickel-metal hydride battery for emergency LED; eco-friendly alternative to NiCd.
    Lithium-ion accumulator
    Rechargeable lithium-ion battery used in emergency LED modules for high energy density.
    Nit (cd/m²)
    Informal unit of luminance; 1 nit = 1 candela per square meter.
    Nit brightness
    Luminance expressed in nits (cd/m2); for comparing luminous surfaces.
    Nitrogen fill
    Nitrogen filling of sealed LED fixtures to prevent condensation.
    Nitruro di gallio (GaN)
    Fundamental semiconductor for the production of blue and white LED chips.
    NMT (connettore)
    Press-fit connector without soldering for quick connections on LED strips.
    NMT connector
    Press-fit connector without soldering for professional LED strips.
    No-dim driver
    LED driver without dimming function; only on/off.
    No-dim mode
    Mode of the LED power supply without dimming; fixed output.
    No-drill mount
    Mounting system for LED profiles that does not require drilling the surface.
    No-load consumption
    Consumption of the power supply without an LED load; to be minimized for energy savings.
    No-load voltage
    Voltage of the LED power supply without a connected load.
    No-load power consumption
    Power absorbed by an LED power supply without load; standby mode.
    Node (nodo)
    Single device in an LED control mesh network.
    Node firmware
    Internal software of a node in the LED control network.
    Node ID
    Unique identifier of an LED device in a mesh network.
    Noise filter
    Anti-noise filter in the LED driver to reduce EMI interference.
    Noise floor
    Minimum electrical noise level in an LED system; affects dimming quality.
    Noise immunity
    Capability of the LED system to function correctly in the presence of disturbances.
    Noise immunity test
    Electrical noise immunity test of the LED driver.
    Noise level
    Acoustic noise level generated by the LED power supply; in dB.
    Noise suppression
    Suppression of electrical disturbances in the LED driver.
    Nominal current
    Nominal operating current of the LED specified by the manufacturer.
    Nominal voltage
    Nominal voltage of the LED strip (5V, 12V, 24V, 48V DC).
    Non-combustible
    LED profile material that does not propagate flame.
    Non-contact dimming
    Contactless dimming via proximity or gesture sensor.
    Non-contact sensor
    Sensor detecting without physical contact; for LED activation.
    Non-contact switch
    Contactless switch for LED activation with gesture or proximity.
    Non-corrosive fixture
    LED fixture made of corrosion-resistant materials.
    Non-corrosive LED
    LED fixture resistant to corrosion for chemically aggressive environments.
    Non-dimmable driver
    LED power supply without dimming function.
    Non-dimmable strip
    LED strip designed for operation only at full brightness.
    Non-dimming mode
    Mode of the LED power supply with fixed output at 100%.
    Non-emergency mode
    Normal operation of the LED fixture with mains power.
    Non-flammable cable
    Non-flammable cable for LED installations in public buildings.
    Non-glare fixture
    LED fixture with a low UGR glare index.
    Non-hazardous area
    Non-hazardous area; standard LED fixtures are sufficient.
    Non-invasive mounting
    Mounting of the LED profile without damaging the existing surface.
    Non-inverting driver
    LED driver maintaining the polarity of the control signal.
    Non-linear dimming
    Dimming with a non-linear curve for a more natural perception of brightness.
    Non-maintained emergency
    Emergency LED fixture that turns on only during a blackout.
    Non-metallic conduit
    PVC tube for protecting LED cables.
    Non-shunted socket
    Lamp holder with separated contacts for direct LED tubes.
    Non-standard profile
    LED profile with non-standard dimensions; custom-made.
    Non-volatile storage
    Non-volatile memory in the LED controller for permanent saving.
    Nonvolatile memory
    Memory retaining data even without power; for LED settings.
    Norma EN 12464-1
    European standard defining illuminance requirements for indoor work environments.
    Norma EN 12464-1 corridoi
    LED illuminance requirements for corridors: 100 lux, UGR<25.
    Norma EN 12464-1 negozi
    LED illuminance requirements for shops: 300 lux, CRI>80.
    Norma EN 12464-1 uffici
    LED illuminance requirements for offices: 500 lux, UGR<19, CRI>80.
    Norma EN 12464-2
    Illuminance requirements for outdoor work areas.
    Norma EN 13201
    European standard for street and outdoor area lighting.
    Norma EN 1838
    Requirements for emergency lighting.
    Norma EN 60598
    Safety standard for lighting fixtures, including those with LED sources.
    Norma EN 61347
    Safety standard for lamp controlgear, including LED drivers.
    Norma EN 62031
    Specific safety for LED modules.
    Norma EN 62471
    Standard on the photobiological safety of lamps and LED fixtures (blue light hazard).
    Normal incidence
    Light beam perpendicular to the surface; zero angle of incidence.
    Normal mode
    Ordinary operating mode of the LED fixture.
    Normal operation mode
    Ordinary operation of the LED fixture with all nominal parameters.
    Normally closed (NC)
    Normally closed relay contact; for emergency LED circuits.
    Normally lit
    LED fixture normally on; turns off only on command.
    Normally open (NO)
    Normally open relay contact; for LED circuits with external command.
    Normativa antincendio LED
    Fire safety requirements applicable to LED profiles and fixtures.
    Normativa applicabile LED
    Set of technical and legislative standards valid for the LED product.
    Normativa di installazione LED
    Standards governing the mounting and connection of the LED installation.
    Normativa di prodotto LED
    Safety and performance standards applicable to the LED product.
    Normativa di progetto LED
    Lighting standards for the design of the LED installation.
    Normativa edilizia LED
    Building regulations governing the installation of LED installations.
    Normativa elettrica LED
    Electrical standards applicable to the design and installation of LED installations.
    Normativa EN 12464-1 LED
    European standard on illuminance for indoor work environments with LEDs.
    Normativa EN 13201 LED
    European standard for street and outdoor area lighting with LEDs.
    Normativa energetica LED
    European directives on the energy efficiency of LED fixtures.
    Normativa illuminotecnica
    Set of standards regulating LED lighting: EN 12464, EN 13201, etc.
    Normativa LED esterno
    Standards for outdoor LED lighting: EN 13201 for roads, light pollution.
    Normativa LED interno
    Standards for indoor LED lighting: EN 12464-1 for work environments.
    Normativa sicurezza LED
    Safety standards for LED products: EN 60598, EN 61347.
    Normativa WEEE LED
    WEEE directive applied to the disposal of LED products.
    Nose (profilo)
    Projecting edge of the LED profile facing the surface.
    Nota di credito LED
    Document for the return of non-conforming LED products.
    Nota di montaggio LED
    Technical note for the correct mounting of the LED system.
    Nota tecnica LED
    Informative document with technical insights on LED products.
    Notch (incavo)
    Recess in the LED profile for the passage or attachment of components.
    Notch dimming
    Dimming with predefined notches of selectable brightness.
    Notch filter
    Optical filter eliminating a narrow band of wavelengths from the LED spectrum.
    Notifica push LED
    Smartphone notification from the status of the smart LED installation.
    Notification LED
    Notification LED signaling system events or status.
    Notizie dal mondo LED
    Updates on technological and market news in the LED sector.
    Novità del catalogo LED
    Latest LED products added to the manufacturer's catalog.
    Novità tecnologica LED
    Recent innovation in LED technology.
    NPF (serie Mean Well)
    Mean Well power supply family slim and compact for LED installations with limited space.
    NPN driver
    Driver circuit with NPN transistor for low-power LEDs.
    NPN transistor
    Transistor used in switching circuits for low-power LEDs.
    NTC (sensore)
    Negative coefficient thermistor used to monitor LED temperature and activate thermal protections.
    Null modem
    Cable with crossed connections; for direct connection between PC and DMX controller.
    Number of channels
    Number of channels of the LED controller; determines how many strips it can handle.
    Number of LEDs per meter
    Density of LEDs on the strip; from 30 to 700+ LED/m.
    Numero d'ordine LED
    Identification number of the order for LED products.
    Numero di alimentatori LED
    Quantity of drivers required for the LED installation.
    Numero di canali controller
    Number of independent channels managed by the LED controller.
    Numero di clip profilo
    Number of clips required for fixing the LED profile.
    Numero di connettori strip
    Number of connectors required for LED strip joints.
    Numero di end cap profilo
    Number of end caps required for the LED profiles.
    Numero di LED per segmento
    Number of LED chips in a cutting segment of the strip.
    Numero di metri di strip LED
    Total length of LED strip required for the project.
    Numero di profili LED
    Number of LED profiles required for the project.
    Numero di punti luce
    Total number of LED fixtures in the lighting installation.
    Numero di zone controller
    Number of independent zones manageable by the LED controller.
    Nuova generazione LED
    Latest generation LED products with improved efficiency and performance.
    Nuovo prodotto LED
    LED item recently launched on the market.
    Nurse call LED
    LED indicator in the nurse call system in hospitals.
    Nursery LED
    LED lighting for nurseries; safe and colorful.
    Nut plate
    Plate with integrated nuts for fixing LED profiles.
    Nylon (clip)
    Plastic material for fixing clips of LED profiles. ↑ Back to top

    O

    O-ring seal
    O-ring seal for waterproof LED connectors.
    OAK finish profile
    LED profile with oak effect finish for integration with furnishings.
    Obbligo di manutenzione LED
    Regulatory requirements for periodic maintenance of the LED installation.
    Obbligo di marcatura CE
    Legal requirement for CE marking for the commercialization of LED products in Europe.
    Obiettivo di illuminamento
    Target lux level on the work surface in the LED project.
    Obiettivo di progetto LED
    Performance result to be achieved with the LED installation.
    Obiettivo di risparmio
    Target for reducing energy consumption with LED lighting.
    Obiettivo di risparmio energetico LED
    Target for reducing consumption with LED lighting.
    Obiettivo di uniformità
    Target min/avg ratio of illuminance on the surface.
    Obiettivo illuminotecnico LED
    Performance target of the LED installation: lux, uniformity, UGR, CRI.
    Object detection
    Object detection for selective activation of LED lighting.
    Object illumination
    Targeted LED lighting on a specific object; accent lighting.
    Oblique angle
    Oblique installation angle of an LED fixture for directional effects.
    Oblique mounting
    Inclined mounting of the LED profile relative to the surface.
    Observation area lighting
    LED lighting for observation and monitoring areas.
    Obstruction light controller
    Controller for LED obstruction warning lights.
    Obstruction light LED
    LED obstruction warning light on towers and tall buildings.
    Obstruction marking
    LED signage for obstacles in air navigation areas.
    Occhiali di protezione
    Protective glasses for cutting and processing LED profiles.
    Occupancy based scheduling
    Programming of LED lighting based on occupancy prediction.
    Occupancy dimming profile
    Dimming profile based on presence: full with people, reduced without.
    Occupancy history
    History of occupancy data for optimizing LED lighting.
    Occupancy pattern
    Typical occupancy pattern used for LED programming.
    Occupancy sensor
    Occupancy sensor activating LEDs when it detects people.
    Occupancy timeout
    Time after which LEDs turn off in the absence of people.
    Occupancy-based control
    LED control based on the presence of people detected by sensors.
    Occupant comfort
    Comfort of occupants in relation to LED lighting.
    Ocean rated LED
    LED fixture certified for use in extreme ocean environments.
    Oculare protettivo
    Eye protection during cutting and processing of LED profiles.
    Off-axis performance
    Luminous performance of the LED off the main optical axis.
    Off-center mount
    Off-center mounting of the LED profile relative to the surface axis.
    Off-grid controller
    LED controller for systems powered by solar or wind energy.
    Off-grid installation
    Autonomous LED installation without connection to the electrical grid.
    Off-grid LED
    LED system powered by autonomous sources (solar panels, batteries).
    Off-peak scheduling
    Programming of LED lighting during off-peak hours.
    Off-site fabrication
    Prefabrication of LED components in the workshop before installation.
    Off-state current
    Residual current flowing through the LED when the dimmer is at zero.
    Offerta commerciale LED
    Commercial proposal for the supply of LED products.
    Offerta economica LED
    Price proposal for the supply of LED products.
    Offerta LED personalizzata
    Customized commercial proposal for the specific LED project.
    Offerta speciale LED
    Commercial promotion with reduced prices on LED products.
    Offerta tecnica LED
    Technical and economic proposal for an LED lighting project.
    Office application
    LED lighting for offices; UGR below 19 and 500 lux on work surfaces.
    Office ceiling LED
    LED lighting for office ceilings; panels and linear profiles.
    Office desk LED
    LED lighting for desks for the visual task.
    Office dimming
    Dimming of LED lighting in offices for comfort and savings.
    Office glare control
    Control of LED glare in offices; UGR below 19.
    Office LED panel
    600x600 mm LED panel for modular office suspended ceilings.
    Office lighting calculation
    Lighting calculation for offices according to EN 12464-1 with LEDs.
    Office lighting design
    Specific design of LED lighting for office environments.
    Office retrofit LED
    Replacement of fluorescent lighting with LEDs in existing offices.
    Offset angle
    Offset angle of the LED beam relative to the fixture axis.
    Offset bracket
    Mounting bracket with offset for positioning the LED profile off-center.
    Offset di colore
    Color difference between the LED strip and the desired target color.
    Offset di luminosità
    Difference between measured and declared brightness of the LED strip.
    Offset mounting
    Mounting of the LED profile off-center relative to the surface axis.
    Offset termico
    Difference between the junction temperature and the ambient temperature.
    Ohm (Ω)
    Unit of measurement of electrical resistance; in LED strips, resistors limit current to the chips.
    Ohm's Law
    Law V=I×R for calculating voltage, current, and resistance in LED circuits.
    Ohmmetro
    Instrument for measuring resistance in LED circuits.
    Oil-tight connector
    Oil-resistant connector for LED systems in industrial environments.
    OLED
    Organic light-emitting diode; alternative technology to inorganic LEDs for flexible luminous surfaces.
    Olografia LED
    Holographic display technique with LED sources.
    Ombreggiatura
    Shadow effect created by the non-uniform distribution of LED light.
    Omnidirectional LED
    LED emitting light in all directions (360 degrees).
    Omologazione LED
    Approval process for a LED product for commercialization.
    On-board controller
    Controller integrated into the PCB of the addressable LED strip.
    On-board driver
    LED driver integrated directly on the strip or rigid bar.
    On-demand lighting
    LED lighting activated only when needed via sensors.
    On-off control
    LED control with only on and off without dimming.
    On-site assembly
    Assembly of LED components directly on the construction site.
    On-site calibration
    Field calibration of the LED installation after installation.
    On-site commissioning
    Commissioning of the LED installation directly on site.
    On-site measurement
    Field measurement of LED parameters after installation.
    On-site survey
    Technical site survey for the design of the LED installation.
    On-site test
    Functional test of the LED installation performed directly on site.
    Ondulazione di uscita
    Residual variation of the DC voltage on the output of the LED driver; causes flicker.
    Ondulazione residua uscita
    Periodic variation of the DC voltage on the output of the LED driver.
    One-channel driver
    LED driver with a single output for monochromatic strips.
    One-circuit track
    Single-circuit electrified LED track.
    One-piece profile
    LED profile in a single piece with co-extruded diffuser.
    One-push dimming
    Dimming with a single button: short press on/off, long press dim.
    Online catalog
    Online catalog of the manufacturer's LED products.
    Online configurator
    Web tool for configuring and ordering custom LED systems.
    Online design tool
    Online tool for designing the LED installation.
    Online monitoring
    Continuous remote monitoring of the LED installation via a web platform.
    Online ordering
    Online ordering of LED products with direct shipping.
    Online product selector
    Online selector for choosing the appropriate LED product.
    Online support
    Online technical support for LED installation and configuration.
    Online training
    Online training for LED installers and designers.
    Opacità del diffusore LED
    Degree of non-transparency of the cover; more opaque = more uniform.
    Opacità del diffusore opale
    Degree of opacity of the opal cover; uniformizes the light.
    Opacity (opacità)
    Degree of non-transparency of the diffuser; higher opacity = more diffusion.
    Opal diffuser efficiency
    Efficiency of the opal diffuser; typical transmission 65-75%.
    Opal glass
    Opal glass for high-quality LED diffusers.
    Opal glass diffuser
    Opal glass diffuser for superior optical quality.
    Opal PC diffuser
    Opal polycarbonate diffuser; impact-resistant.
    Opal PMMA diffuser
    Opal PMMA diffuser; maximum luminous transparency.
    Opale (diffusore)
    See "Opal cover". Type of white diffuser that completely uniformizes the light.
    Open area emergency
    Anti-panic LED lighting for open areas larger than 60 m2.
    Open area lighting
    Emergency LED lighting for open spaces larger than 60 m2.
    Open ceiling mount
    Mounting of LED profiles on open ceilings without a suspended ceiling.
    Open channel profile
    LED profile with an open upper section without a diffuser.
    Open circuit
    Open circuit (interrupted); in an LED strip indicates a fault with a section off.
    Open circuit detection
    Open circuit detection in the LED driver for diagnostics.
    Open circuit voltage
    No-load voltage of the LED power supply.
    Open frame driver
    LED driver without enclosure; for mounting in closed fixtures.
    Open loop control
    LED control without feedback; the system does not verify the result.
    Open plan office LED
    LED lighting for open-plan offices; low UGR and zoning.
    Open protocol
    Non-proprietary open protocol for LED control: DALI, DMX, KNX.
    Open source controller
    LED controller based on an open-source platform.
    Open space lighting
    LED lighting for large open-plan environments.
    Open structure profile
    LED profile with an open section for maximum thermal dissipation.
    Open terminal accessory
    Open end cap for cable passage in LED profiles.
    Operating cost
    Operating cost of LED lighting including energy and maintenance.
    Operating current
    Actual operating current of the LED under operating conditions.
    Operating current range
    Operating current range of the LED driver.
    Operating cycle
    Operating cycle of the LED installation: hours of on-time per day.
    Operating environment
    Environmental conditions of operation of the LED system.
    Operating hours
    Accumulated operating hours of the LED installation.
    Operating instruction
    Operating instructions for the use and management of the LED installation.
    Operating life
    Total operating life of the LED system; 50,000-100,000 hours for the best.
    Operating manual
    Operating manual of the LED installation for the user.
    Operating mode
    Operating mode of the LED system: normal, emergency, test.
    Operating point
    Operating point of the LED on the I-V curve.
    Operating position
    Installation position of the LED fixture: horizontal, vertical, inclined.
    Operating power
    Actual operating power of the LED strip in operation.
    Operating temperature range
    Temperature range in which the LED system operates correctly.
    Operating voltage
    Operating voltage of the LED strip under load.
    Operational amplifier
    Operational amplifier in LED control circuits.
    Operator interface
    Operator interface for managing the LED installation.
    Operator panel
    Control panel for manual management of LED lighting.
    Operatore di impianto LED
    Technical operator responsible for the management and maintenance of the LED installation.
    Opinione del cliente LED
    Customer review of the LED product or service received.
    Opposing reflector
    Opposing reflector for redirecting LED light in the opposite direction.
    Optical adapter
    Optical adapter for modifying the LED beam distribution.
    Optical adjustment
    Optical adjustment of the LED fixture for focusing.
    Optical axis
    Optical axis of the LED; direction of maximum luminous intensity.
    Optical bench
    Optical bench for precision measurement of LED performance.
    Optical cable
    Fiber optic cable for data or light transport in LED systems.
    Optical calculation
    Optical calculation of the light distribution of the LED system.
    Optical center
    Optical center of the LED lens; point of maximum intensity.
    Optical component
    Optical component of the LED system: lens, diffuser, reflector.
    Optical contact
    Optical contact between the LED and the light guide without an air gap.
    Optical coupler
    Optical coupler for transferring light from an LED source to a guide.
    Optical cross-talk
    Light contamination between adjacent LED channels.
    Optical data
    Optical data of the LED product: angle, distribution, efficiency.
    Optical density
    Optical density of the diffuser; higher = more uniform but more loss.
    Optical design software
    Software for the optical design of LED fixtures.
    Optical distance
    Optical distance between the LED source and the work plane.
    Optical efficiency
    Optical efficiency of the complete system (lens, diffuser, profile) compared to the flux emitted by the LED chip.
    Optical efficiency rating
    Classification of the optical efficiency of the LED fixture.
    Optical fiber cable
    Fiber optic cable for transporting light or data in LED systems.
    Optical fiber illumination
    Illumination with optical fibers powered by an LED source.
    Optical film
    Optical film applied to the diffuser to modify LED distribution.
    Optical filter
    Optical filter applied to the LED source to modify color or distribution.
    Optical grade material
    Optical quality material for LED lenses and diffusers.
    Optical grade PMMA
    Optical quality PMMA for high-performance LED diffusers.
    Optical insert
    Interchangeable optical insert in the LED profile to control the beam.
    Optical isolation
    Optical separation between adjacent LED sources to avoid chromatic contamination.
    Optical loss
    Loss of luminous flux through lenses, diffusers, and other optical elements.
    Optical path length
    Length of the optical path from the LED source to the illuminated surface.
    Optical power
    Radiant power emitted by the LED; measured in milliwatts (mW).
    Optical sensor
    Sensor detecting light for feedback in LED control.
    Optical simulation
    Computerized simulation of the optical behavior of an LED fixture.
    Optical system
    Set of optical components forming the beam of the LED fixture.
    Optics design
    Design of optics (lenses, reflectors, diffusers) for LED fixtures.
    Optimal CCT
    Ideal color temperature for a specific LED application.
    Optimal current
    Drive current optimizing the efficiency/flux ratio of the LED.
    Opto-coupler
    Optical coupler for galvanic isolation of LED control signals.
    Opto-electronic device
    Device converting electrical signals into light; LEDs are optoelectronic devices.
    Optoelectronic
    Device converting electrical signals into light or vice versa; the LED is optoelectronic.
    Opzione di colore strip LED
    Choice of CCT or color of the LED strip for the project.
    Opzione di dimmerazione LED
    Possibility of dimming the LED strip: PWM, DALI, 0-10V, TRIAC.
    Opzione di finitura profilo LED
    Choice of finish for the LED profile: anodized, painted, RAL.
    Opzione di montaggio profilo
    Alternative installations for the LED profile: recessed, surface, suspended.
    Opzione di protezione IP LED
    Choice of IP rating for the LED strip and profile.
    Optional LED accessory
    Additional component not included in the base LED profile kit.
    Orbit (profilo circolare)
    Suspended circular LED profile for decorative lighting.
    Orbital light
    Suspended circular LED fixture rotating around an axis.
    Order code
    Unique ordering code to identify a specific LED product.
    Organic compound
    Organic compound used in OLED LEDs for light emission.
    Organic LED (OLED)
    Organic LED on a flexible substrate; alternative for luminous surfaces.
    Organigramma del progetto
    Organizational structure of the project team for the LED installation.
    Orientabile (faretto)
    LED spotlight with joint to direct the beam.
    Orientamento del fascio
    Direction of the LED light beam relative to the illuminated surface.
    Orientamento del profilo LED
    Angular positioning of the LED profile relative to the surface.
    Orientamento della strip
    Mounting direction of the LED strip in the profile; respect polarity.
    Orientation (apparecchio)
    Angular positioning of the LED fixture relative to the surface to be illuminated.
    Ornamental bracket
    Decorative bracket for mounting stylish LED fixtures.
    Ornamental lighting
    Decorative and ornamental LED lighting for events and festivities.
    Orologio astronomico LED
    Timer calculating sunrise and sunset for automatic control of outdoor LED lighting.
    Oscillazione della luminosità
    Periodic variation of LED brightness; see Flicker.
    Oscillazione parassita
    Unwanted oscillation in the LED driver causing instability.
    Oscilloscopio
    Measuring instrument displaying the waveform of PWM or DALI signals for diagnostics of LED systems.
    Osmosi (protezione)
    Protection of LED components from moisture absorption by osmosis.
    Ospedale LED
    LED lighting for hospitals; HCL, emergency, and high CRI.
    Osram
    See "LED Osram". German manufacturer of semiconductors and high-reliability LED chips.
    Osram Duris
    Osram Duris family of mid-power LED chips for strips.
    Osram Osconiq
    Osram Osconiq series of high-reliability LED chips.
    Ossidazione dei contatti
    Formation of oxide on the contacts of the LED strip increasing resistance.
    Osteria LED
    LED lighting for taverns and trattorias; warm CCT and atmosphere.
    OTA (Over The Air)
    Wireless firmware update of smart LED controllers.
    Ottica a fascio variabile
    LED lens with mechanically adjustable beam angle.
    Ottica a riflettore parabolico
    Optics with parabolic reflector for a concentrated LED beam.
    Ottica asimmetrica wall-washer
    Optics distributing LED light asymmetrically towards the wall.
    Ottica batwing
    Optics producing a double-lobe distribution for LED uniformity.
    Ottica collimante LED
    Lens making the divergent LED beam parallel.
    Ottica di controllo fascio
    Any optical element modifying the LED beam distribution.
    Ottica diffondente
    Optical element scattering LED light uniformly.
    Ottica ellittica
    LED lens with an elliptical beam for asymmetric lighting.
    Ottica freeform LED
    LED lens with a shaped surface for custom distributions.
    Ottica honeycomb
    Honeycomb grid for extreme anti-glare control.
    Ottica intercambiabile
    Replaceable LED lens or reflector to modify distribution.
    Ottica magnetica
    LED optics retained by magnets for easy replacement.
    Ottica micro-strutturata
    Surface with microstructures for LED beam control.
    Ottica primaria
    Lens integrated into the LED package forming the base distribution.
    Ottica primaria LED
    Lens integrated into the LED chip package.
    Ottica prismatica LED
    Surface with micro-prisms for controlled LED distribution.
    Ottica riflettente LED
    Reflector redirecting LED light towards the target surface.
    Ottica secondaria
    Additional lens or reflector applied after the LED source to modify its light distribution.
    Ottica secondaria LED
    Additional lens or reflector added after the LED to modify distribution.
    Ottica simmetrica
    LED optics with equal distribution in all directions.
    Ottica TIR LED
    Total internal reflection lens for efficient beam control.
    Ottimizzazione del layout
    Improvement of the arrangement of LED fixtures for uniformity.
    Ottimizzazione del progetto LED
    Improvement of the LED project for optimal performance and cost.
    Ottimizzazione energetica
    Reduction of the consumption of the LED installation with sensors and automation.
    Ottimizzazione termica
    Improvement of thermal management to extend LED life.
    Outage
    Interruption of LED lighting due to fault or blackout.
    Outdoor corner accessory
    Fitting for outdoor angles between two LED profiles.
    Outdoor dining application
    LED lighting for outdoor restaurants; IP protection and warm CCT.
    Outdoor driver
    LED power supply with IP protection for outdoor installation.
    Outdoor enclosure
    Enclosure for LED equipment designed for outdoor installation.
    Outdoor LED controller
    LED controller with IP protection for managing outdoor installations.
    Outdoor lighting
    LED lighting for outdoor spaces: gardens, roads, squares, facades.
    Outdoor pathway light
    LED light for outdoor pedestrian paths and gardens.
    Outdoor rated
    LED component certified for outdoor use (IP65 or higher).
    Outdoor strip
    LED strip with IP65 or higher protection for outdoor use.
    Outer lens
    Outer lens of an LED fixture protecting the internal optics.
    Outline lighting
    LED lighting of the contour of a building or architectural element.
    Output (uscita)
    Power, voltage, or current delivered by the LED power supply or controller.
    Output cable
    Output cable of the LED power supply to the strip.
    Output connector
    Output connector of the power supply for connecting the LED strip.
    Output connector type
    Type of output connector of the LED power supply.
    Output current
    Current delivered by the LED power supply or driver.
    Output current adjustment
    Adjustment of the output current of the LED driver.
    Output efficiency
    Efficiency of the power supply output; ratio of useful power to absorbed power.
    Output fuse
    Protection fuse on the output of the LED power supply.
    Output ground
    Ground of the LED power supply output; negative pole.
    Output impedance
    Output impedance of the LED driver; low for constant voltage.
    Output LED calcolato
    Total luminous flux of the LED installation calculated by the software.
    Output LED dichiarato
    Luminous flux declared by the manufacturer for the LED product.
    Output LED indicator
    Status LED indicating the operation of the power supply output.
    Output LED misurato
    Actual luminous flux measured on the installed LED installation.
    Output noise
    Electrical noise on the power supply output; potential cause of flicker.
    Output power
    Useful power delivered by the power supply to the LED strips.
    Output regulation
    Accuracy of the output regulation of the LED power supply.
    Output ripple voltage
    Residual ripple of the output voltage of the power supply.
    Output terminal
    Output terminal of the LED power supply for cable connection.
    Output tolerance
    Tolerance on the output voltage or current of the LED driver.
    Output voltage
    Output voltage of the LED power supply (5V, 12V, 24V, 48V DC).
    Output voltage adjustment
    Adjustment of the output voltage of the LED power supply via trimmer.
    Oval profile
    LED profile with an oval section for a rounded aesthetic effect.
    Over-current trip
    Intervention of the protection for excessive current in the LED circuit.
    Over-engineering
    Excessive sizing; in LED installations a 20% margin is good practice.
    Over-voltage trip
    Intervention of the protection for excessive voltage on the LED driver output.
    Overcurrent protection (OCP)
    Integrated protection in the power supply that intervenes in case of excessive current.
    Overdriving
    Driving the LED at a current above the nominal value; increases brightness but drastically reduces lifespan.
    Overhead crane LED
    LED lighting mounted on overhead cranes for industrial lighting.
    Overhead lighting
    LED lighting from above; ceiling or pendants.
    Overheat indicator
    LED indicator signaling overheating of the power supply or fixture.
    Overheating prevention
    Measures to prevent overheating of the LED system.
    Overlap (giunzione)
    Slight overlap between two adjacent diffusers to eliminate the dark line.
    Overlay (diffusore)
    Layer superimposed on the diffuser to modify diffusion or color.
    Overmolding
    Overmolding for sealing connectors and LED joints.
    Oversize driver
    Oversized power supply for greater reliability and lifespan.
    Overtemperature shutdown
    Automatic shutdown of the power supply for protection from excessive temperature.
    Overvoltage protection (OVP)
    Integrated protection in the power supply that intervenes in case of output voltage above the limit.
    Oxidation
    Surface oxidation of the LED strip contacts; causes resistance and malfunctions.
    Oxygen-free copper
    Oxygen-free copper for low-resistance LED conductors.
    Ozono
    Gas generated by short-wavelength UV-C LEDs; relevant in LED sanitization applications. ↑ Back to top

    P

    Package efficiency
    Efficiency of the LED package; ratio between emitted light and power dissipated in the chip.
    Package LED
    Enclosure of the LED chip including the die, bond wires, phosphor, and lenses; identified by a numeric code (e.g., 2835).
    Package thermal resistance
    Thermal resistance of the LED package between junction and PCB.
    Packaging specification
    Packaging specification of LED products for transport and storage.
    Packing density
    Density of LED assembly on the strip PCB.
    Packing foam
    Protective foam in the packaging of LED strips.
    Packing list
    List of components included in a LED strip or profile kit.
    Packing unit
    Packaging unit of the LED product: reel, box, pallet.
    Pad di saldatura
    Copper area on the LED strip where soldering is performed for electrical connections.
    Pad layout
    Arrangement of soldering pads on the LED strip for connections.
    Pad termico (thermal pad)
    Thermally conductive sheet between strip and profile; alternative to thermal paste.
    Pagamento dilazionato LED
    Possibility to pay for the LED installation in monthly installments.
    Pagina prodotto LED
    Product page of the LED item on the manufacturer's website with specifications.
    Paint booth LED
    LED lighting for paint booths; explosion-proof and high CRI.
    Paint matching
    Painting of the LED profile with a color identical to the surrounding surface.
    Painted profile
    LED profile powder-coated in any RAL color.
    Pair cable
    Twisted-pair cable for balanced LED control signals.
    Pair wiring
    Twisted-pair wiring for balanced LED control signals.
    Palazzo storico LED
    LED lighting for historic buildings; discreet integration.
    Palestra LED
    LED lighting for gyms; high uniformity and anti-stroboscopic.
    Pallet shipment
    Pallet shipment of large quantities of LED products.
    Pan head screw
    Pan head screw for fixing LED clips and brackets.
    Pan-tilt mechanism
    Pan-tilt orientation mechanism for motorized LED fixtures.
    Pane glass LED
    Flat glass panel edge-lit with LED strip; for furniture and displays.
    Panel ceiling mount
    Mounting of LED panels in the modular suspended ceiling.
    Panel connector
    Panel-mounted connector for LED interface.
    Panel cut-out
    Hole in the panel for recessed mounting of an LED fixture.
    Panel cut-out dimension
    Dimension of the hole in the panel for mounting the LED downlight.
    Panel driver integration
    Integration of the driver into the LED panel for plug-and-play installation.
    Panel efficiency
    Luminous efficacy of the complete LED panel.
    Panel fixture
    Flat LED panel fixture for suspended ceilings.
    Panel heat dissipation
    Thermal dissipation of the LED panel through the back.
    Panel LED driver
    LED driver for modular suspended ceiling panels.
    Panel light efficiency
    Luminous efficacy of the complete LED panel including edge-lighting and diffuser.
    Panel mount connector
    Panel-mounted connector for power or signal interface.
    Panel mount LED indicator
    Panel-mounted LED indicator for signaling.
    Panel mount sensor
    Sensor mounted in the LED panel for automatic control.
    Panel size
    Dimension of the LED panel: 300x300, 600x600, 300x1200 mm standard.
    Panel suspension kit
    Suspension kit for LED panels from the ceiling.
    Panel thickness
    Thickness of the LED panel; typically 9-12 mm for slim.
    Panel uniformity
    Luminous uniformity on the surface of the LED panel.
    Panic button
    Emergency button activating complete LED lighting.
    Panic lighting
    Anti-panic emergency LED lighting for large spaces.
    Pannello LED
    Flat fixture with LEDs distributed on a surface for uniform ceiling or wall lighting.
    Pannello luminoso LED
    Panel backlit with LED strip for signage and decoration.
    Pannello smart a parete
    Wall-mounted touch panel for controlling smart LED lighting.
    Pannello solare per LED
    Photovoltaic panel for powering off-grid LED systems.
    Panoramic LED strip
    LED strip with a very wide emission angle (>160 degrees).
    Parabolic diffuser
    Diffuser with a parabolic section for controlled distribution.
    Parabolic louvre
    Parabolic anti-glare grid for LED fixtures.
    Parabolic reflector
    Parabolic reflector for concentrating the LED beam.
    Parallel circuit
    Circuit where LED strips share the same voltage.
    Parallel connection diagram
    Diagram of parallel connection of multiple LED strips.
    Parallel driver
    Configuration with multiple LED drivers in parallel for greater power.
    Parallel feed
    Parallel powering of multiple LED strips from the same power supply.
    Parallel power supply
    LED power supplies in parallel for redundancy or greater power.
    Parallel strip layout
    Arrangement of parallel LED strips for lighting large surfaces.
    Parallelismo (strip)
    Alignment of two side-by-side strips; for uniform backlighting.
    Paralume (shade)
    Decorative shade modifying the distribution and aesthetics of LED light.
    Parameter download
    Download of configuration parameters to the LED driver.
    Parameter setting
    Setting of the operating parameters of the LED driver (current, dimming, protections).
    Parameter setting guide
    Guide to setting the parameters of the LED driver.
    Parameter upload
    Upload of parameters from the LED driver to the configuration software.
    Parametri del driver LED
    Specifications: voltage, current, power, efficiency, dimming, IP, PF.
    Parametri del profilo LED
    Specifications: dimensions, material, finish, weight, strip compatibility.
    Parametri del progetto LED
    Technical specifications to be met in the design of the LED installation.
    Parametri della strip LED
    Technical specifications: CCT, CRI, W/m, lm/m, LED/m, IP, Vf, width.
    Parametri elettrici strip LED
    Voltage, current, and power of the LED strip.
    Parametri fotometrici strip LED
    Flux, CRI, CCT, and emission angle of the LED strip.
    Parametri meccanici profilo LED
    Dimensions, weight, and strength of the LED profile.
    Parametri termici strip LED
    Operating temperature and dissipation of the LED strip.
    Parametric control
    LED control based on numerical parameters (CCT, CRI, lux) rather than per fixture.
    Parathom
    Line of LED retrofit lamps by Osram/Ledvance for replacing traditional lamps.
    Parete attrezzata LED
    Wall unit with integrated LED lighting for the living room.
    Parete divisoria LED
    Partition panel with integrated LED strip for light and separation.
    Parete luminosa LED
    Large luminous surface illuminated with LED strips for a scenic effect.
    Parete retroilluminata LED
    Wall with rear LED strip for a decorative luminous effect.
    Parking application
    LED lighting for parking lots; high uniformity and presence sensors.
    Parking area LED
    LED lighting for parking areas; uniformity and sensors.
    Parking deck LED
    LED lighting for covered parking floors.
    Parking garage LED
    LED lighting for garages and covered parking.
    Parking garage sensor
    Presence sensor for controlling LED lighting in parking lots.
    Parking lot LED layout
    LED lighting layout for surface parking lots.
    Parking structure LED
    LED lighting for multi-story parking structures.
    Parrucchiere LED
    LED lighting for hair salons; high CRI for colors.
    Partial load operation
    Operation of the LED power supply at partial load; efficiency to be verified.
    Partial on mode
    Mode in which only part of the LEDs of the fixture are on.
    Partner commerciale LED
    Company collaborating for the supply of LED products.
    Partner tecnico LED
    Company collaborating for technical support on LEDs.
    Partnership con produttori LED
    Commercial collaboration with LED component manufacturers.
    Passacavo
    Rubber or silicone element sealing the cable entry point in the profile or power supply.
    Passacavo IP
    Cable gland with gasket to maintain the ingress protection rating.
    Passage light LED
    LED lighting for passageways and corridors.
    Passaggio cavi nel profilo
    Internal channel in the LED profile for orderly cable routing.
    Passerella LED
    LED lighting for walkways and elevated passages.
    Passione per la luce LED
    Dedication of the manufacturer and designer to the quality of LED lighting.
    Passive component
    Passive component in the LED circuit: resistor, capacitor, inductor.
    Passive house lighting
    LED lighting for passive buildings; very low energy consumption.
    Passive house standard
    Passive house standard where LED lighting contributes to efficiency.
    Passive infrared (PIR)
    Passive infrared sensor for motion detection.
    Passive sensor
    Sensor detecting without emitting signals; e.g., PIR for LEDs.
    Passo di taglio strip 100mm
    LED strip cuttable every 100 mm; for 24V high density.
    Passo di taglio strip 200mm
    LED strip cuttable every 200 mm; for 48V.
    Passo di taglio strip 25mm
    LED strip cuttable every 25 mm; for 12V low density.
    Passo di taglio strip 33mm
    LED strip cuttable every 33 mm.
    Passo di taglio strip 50mm
    LED strip cuttable every 50 mm; for standard 24V.
    Pasta disossidante
    Flux paste facilitating soldering of LED strip contacts.
    Pasta termica
    Thermally conductive compound applied between the LED strip and the profile to improve heat transfer.
    Pasticceria LED
    LED lighting for pastry shops; warm CCT and food lighting.
    Patch panel
    Connection panel for organizing cables in complex LED installations.
    Patent protection
    Patent protection on innovative LED technologies.
    Path light LED
    LED fixture for lighting paths and pedestrian walkways.
    Pathway bollard LED
    LED bollard for path marking in gardens and pedestrian areas.
    Pathway lighting
    LED lighting for pedestrian paths and corridors.
    Patient room LED
    LED lighting for hospital wards; dimmable and circadian.
    Patio LED
    LED lighting for patios and terraces; IP65 and warm CCT.
    Pattern (effetto)
    Dynamic light pattern created by the controller on addressable LED strips.
    Pattern control
    Control of the light pattern on addressable LED strips.
    Pattern generator
    Generator of light patterns for addressable LED strips.
    Pattern library
    Library of preset effects and patterns in the LED controller.
    Pattern programming
    Programming of custom light patterns on LED strips.
    Pattern repeat
    Repetition of a light pattern along the addressable LED strip.
    Pattern speed control
    Adjustment of the speed of the LED light pattern.
    Pause mode
    Mode in which the dynamic LED effect stops maintaining the current state.
    Pavilion lighting
    LED lighting for pavilions and gazebos.
    Pay-back period LED
    Payback period of the investment in LED lighting.
    Pay-per-lux
    Business model where payment is for the LED lighting service, not the fixture.
    Payload (dati)
    Information content of a data packet in LED protocols (DMX, Art-Net).
    Payload capacity
    Payload capacity of a support for LED fixtures.
    PBT (polibutilene tereftalato)
    Thermoplastic polymer used for connectors and LED components.
    PCB (Printed Circuit Board)
    Printed circuit board; the base on which LEDs and electronic components of the strip are mounted.
    PCB alluminio
    Printed circuit board on a metallic aluminum substrate for superior thermal dissipation; used in rigid LED bars.
    PCB assembly
    Assembly of components on the LED strip PCB.
    PCB assembly line
    Automated assembly line for the production of LED strips.
    PCB bianco
    LED strip with a white printed circuit board; neutral aesthetics visible through clear diffusers.
    PCB ceramico
    Ceramic substrate for very high thermal dissipation; extreme power LEDs.
    PCB cleaning
    Cleaning of the PCB after soldering to remove flux residues.
    PCB coating
    Protective coating of the LED strip PCB: conformal coating.
    PCB connector
    Connector mounted on the LED strip PCB.
    PCB copper weight
    Copper weight per unit area of the LED PCB: 1 oz, 2 oz, 3 oz.
    PCB defect
    PCB defect of the LED strip detected during quality control.
    PCB design
    Design of the printed circuit board of the LED strip.
    PCB drilling
    Drilling of the PCB for connections and component mounting.
    PCB etching
    Etching of the PCB to create the conductive tracks of the LED strip.
    PCB fabrication
    Fabrication of the printed circuit board for LED strips.
    PCB flessibile
    See "FPCB". Flexible printed circuit on a polymer substrate for curved LED strips.
    PCB flex radius
    Bending radius of the flexible PCB of the LED strip.
    PCB FR4
    Fiberglass and epoxy substrate; for rigid PCBs of controllers.
    PCB ground plane
    Ground plane of the LED strip PCB for electrical stability and EMI.
    PCB inspection
    Visual or automatic inspection of the PCB for quality control.
    PCB land pattern
    Pattern of soldering pads on the LED strip PCB.
    PCB layout
    Arrangement of tracks and components on the LED strip PCB.
    PCB manufacturing
    Manufacturing process of the PCB for LED strips.
    PCB material
    Base material of the PCB: polyimide, FR4, aluminum, ceramic.
    PCB nero
    LED strip with a black printed circuit board; reduces internal reflections and improves contrast in visible applications.
    PCB pad size
    Size of the soldering pads on the LED strip.
    PCB panel size
    Size of the PCB panel for mass production of LED strips.
    PCB panelization
    Arrangement of multiple LED strips on a PCB panel for efficient production.
    PCB prototyping
    Prototyping of the PCB for the development of new LED strips.
    PCB quality control
    Quality control of the LED strip PCB: optical inspection and electrical test.
    PCB repair
    Repair of the LED strip PCB for replacement of defective components.
    PCB routing
    Routing of traces on the LED strip PCB.
    PCB solder mask color
    Color of the solder mask of the LED PCB: green, white, black.
    PCB spessore rame (1oz, 2oz, 3oz)
    Amount of copper per unit area; more copper = lower resistance.
    PCB stackup
    Composition of the layers of the multilayer LED PCB.
    PCB stiffener
    Rigid reinforcement applied to the flexible PCB for connection areas.
    PCB substrate material
    Material of the PCB substrate: polyimide, FR4, aluminum, ceramic.
    PCB surface finish
    Surface finish of the LED PCB: HASL, ENIG, OSP.
    PCB test
    Electrical and optical test of the LED strip PCB in production.
    PCB thickness
    Thickness of the LED strip PCB; typically 0.12-0.20 mm for FPCB.
    PCB trace
    Copper conductive track on the LED strip PCB.
    PCB trace width
    Width of the copper tracks on the PCB; greater = lower resistance.
    PCB via
    Plated through-hole in the PCB for connection between layers.
    Peak current
    Maximum peak current tolerable by the LED for short pulses.
    Peak lumen output
    Maximum luminous flux emitted by the LED strip at full power.
    Peak wavelength
    Wavelength at which the LED emits maximum radiant power.
    Pedestal mount
    Pedestal mounting for outdoor LED fixtures.
    PEEK (polimero)
    High-performance polymer for LED components in extreme environments.
    Peel force
    Force required to peel the double-sided tape from the LED strip; indicates adhesion quality.
    Peel strength
    Peel strength of the double-sided tape of the LED strip from the surface.
    Pelacavi
    Tool for precise stripping of LED power cables.
    Pellicola protettiva profilo
    Removable film applied at the factory to protect the LED profile during transport.
    PELV (Protective Extra Low Voltage)
    Protective extra-low voltage with grounding; alternative to SELV for LED installations.
    Pendant cable
    Suspension cable for pendant LED profiles.
    Pendant height
    Suspension height of a pendant LED profile.
    Pendant light
    LED fixture suspended from the ceiling via cable or rod.
    Pendant mount kit
    Complete kit for suspending LED profiles from the ceiling.
    Pendente LED
    LED profile or fixture suspended from the ceiling via cables or rods; direct and/or indirect light.
    Pendente LED per cucina
    Suspended LED fixture above the table or island of the kitchen.
    Pendente LED per ufficio
    Suspended LED profile for direct-indirect lighting in offices.
    Penetration depth
    Depth to which LED light penetrates a translucent material.
    Pennarello indelebile
    Permanent marker for marking cut and mounting points of the LED profile.
    Pensilina LED
    LED lighting for canopies and bus shelters.
    Penthouse lighting
    LED lighting for penthouses and attic spaces; slim profiles and warm CCT.
    Percent flicker
    Percentage measure of peak-to-peak brightness variation relative to the average; lower is better.
    Percentuale di dimmerazione
    Current LED brightness level expressed as a percentage of maximum.
    Percorso dei cavi LED
    Routing of power and signal cables in the LED installation.
    Percorso luminoso LED
    LED light line guiding movement along a corridor or path.
    Perdita di efficienza LED
    Reduction of LED system efficiency due to temperature or aging.
    Perdita nel diffusore
    Reduction of luminous flux through the diffuser; opal ~30%.
    Perdita nel driver
    Power dissipated as heat by the LED power supply; efficiency loss.
    Perforated panel
    Perforated panel for ventilation and LED light distribution.
    Performance data
    Measured performance data of an LED strip: flux, CRI, CCT, power.
    Performance LED garantita
    Performance of the LED product guaranteed by the manufacturer.
    Pergolato LED
    LED lighting for pergolas; IP65 and warm CCT.
    Perimeter lighting
    Perimeter LED lighting of an environment or piece of furniture.
    Periodo di ammortamento LED
    Time required to recover the LED investment through savings.
    Permanent installation
    Fixed and permanent LED installation; not temporary.
    Permanent magnet mount
    Fixing with permanent magnets for quick installation on metal surfaces.
    Permit (autorizzazione)
    Permission required for LED installations in historic or regulated buildings.
    Personal lighting
    Individual LED lighting controlled by the single user.
    Personalizzazione del prodotto LED
    Adaptation of LED strips, profiles, and systems to specific needs.
    Personalizzazione della CCT
    Choice of the specific color temperature for the LED strip of the project.
    Personalizzazione della finitura
    Choice of color and surface treatment of the LED profile.
    Personalizzazione della lunghezza
    Cutting of the LED strip and profile to the exact required length.
    Personalizzazione della potenza
    Choice of the power per meter of the LED strip based on the application.
    Peso del profilo LED
    Mass per linear meter of the LED profile; for structural calculation.
    PET (film)
    Polyethylene terephthalate film for LED insulation and protection.
    PET film
    Polyethylene terephthalate film used as insulator in LED strips.
    PF correction
    Power factor correction in the LED power supply.
    PFC attivo
    Active power factor correction with boost circuit in the LED driver.
    PFC passivo
    Passive power factor correction with filter in the LED driver.
    Pharmaceutical application
    LED lighting for pharmaceutical labs and production; GMP compliant.
    Pharos Designer
    Software for professional control of architectural LED installations.
    Phase angle
    Phase angle of the AC signal cut by the TRIAC dimmer.
    Phase angle dimming
    Dimming by varying the phase angle of the AC signal.
    Phase-cut dimming
    See Phase-cut dimmer. Dimming by interrupting the AC wave.
    Phosphor aging
    Aging of the phosphor in the LED causing chromatic shift over time.
    Phosphor coating
    Phosphor coating applied to the LED die for conversion to white light.
    Phosphor conversion
    See "Photon conversion". Process by which the phosphor converts the blue light of the LED chip to white.
    Photo sensor
    Light sensor for automatic control of LED brightness.
    Photobiological risk group
    Classification of the photobiological hazard of the LED source.
    Photobiological safety
    Photobiological safety; assessment of the risk from exposure to LED light (standard EN 62471).
    Photocatalytic LED
    LED activating photocatalytic processes for air purification.
    Photocell
    Photoelectric cell for automatic switching on of LEDs at dusk.
    Photoelectric sensor
    Photoelectric sensor for object detection in the LED field.
    Photoluminescence
    Emission of light from a material stimulated by photons; principle of the LED phosphor.
    Photometric data
    Measured data on the light distribution of an LED fixture.
    Photometric file
    Data file (.ies, .ldt) with the light distribution of the LED fixture.
    Photometric report
    Document with the results of photometric measurements of an LED fixture.
    Photometric testing
    Laboratory measurement of the photometric performance of an LED fixture.
    Photometry
    Science of the measurement of visible light.
    Photon
    Quantum of light emitted by the LED chip during electron-hole recombination.
    Photon flux
    Flux of photons emitted by the LED source; relevant for grow lighting.
    Photon energy
    Energy of the photon emitted by the LED; E = hf where h is Planck's constant.
    Photon recycling
    Technique for recovering photons lost internally in the LED chip.
    Photopic lumen
    Lumens weighted on the photopic sensitivity curve of the human eye.
    Photopic vision
    Daylight vision; the V(λ) curve describes its sensitivity.
    PhotoView
    Software for viewing renderings of LED lighting projects.
    Photovoltaic panel (per LED)
    Solar panel powering off-grid LED systems.
    Physical vapor deposition
    Deposition technique for reflective coatings on LED profiles.
    Phytochrome
    Receptor in plants sensitive to red and infrared light; relevant for grow LEDs.
    Pianificazione dell'installazione LED
    Organization of the mounting phases of the LED installation.
    Pianificazione settimanale LED
    Programming of LED scenes for each day of the week.
    Piano di illuminazione LED
    Document with the arrangement and specifications of all LED light points.
    Piano di lavoro (h=0.85 m)
    Standard height of the work plane for LED illuminance calculation.
    Piano di lavoro illuminotecnico
    Reference surface for LED illuminance calculation.
    Piano di manutenzione LED
    Program of periodic maintenance operations for the LED installation.
    Piano illuminotecnico LED
    Design document with the layout and specifications of the LED installation.
    Piano utile
    Surface on which LED illuminance is calculated; typically at 0.85 m.
    Piastra di connessione LED
    Terminal block for distributing power to multiple LED strips.
    Piastra di giunzione interna
    Internal metal plate for connecting two sections of LED profile.
    Piattaforma cloud LED
    Cloud service for remote management of the smart LED installation.
    Piazza LED
    LED lighting for urban squares; luminous street furniture.
    Piazzamento degli alimentatori
    Positioning of LED drivers in the installation for accessibility.
    Piazzamento dei profili LED
    Positioning of LED profiles according to the lighting design project.
    Piazzamento dei sensori LED
    Positioning of sensors for optimal coverage of the LED area.
    Picco di emissione LED
    Wavelength at which the LED emits maximum power.
    Pickup coil
    Detection coil for measuring current in LED circuits.
    Piedistallo LED
    LED lighting column for gardens and pathways.
    Piega della strip LED
    Bending of the flexible strip to adapt to curves and angles.
    Pier light
    LED fixture on a pillar for lighting gates and entrances.
    Pig tail
    Short cable with pre-installed connector for quick connection.
    Pigtail cable
    Cable with a connector on one side; for connecting LED strips.
    Pilastro illuminato LED
    Column with integrated LED strip for architectural lighting.
    Pilot indicator
    LED indicator showing the operating status of the system.
    Pilot light
    LED indicator light showing the status of a device.
    Pin configuration
    Arrangement of pins in an LED connector: polarity and function.
    Pin connector
    Pin connector for LED strips; available in 2-6 pin versions.
    Pinhole LED
    LED fixture with a very small aperture for a concentrated beam.
    Pinout
    Arrangement and function of pins of an LED connector.
    Pinza a becchi lunghi
    Precision pliers for work on LED connectors and strips.
    Pinza amperometrica
    Instrument for measuring current in the LED circuit without cutting the cable.
    Pinza crimpatura
    Crimping pliers for connectors on LED cables.
    Pinza spellafili
    Stripping pliers for precise stripping of LED cables.
    Pinza universale
    Universal pliers for general work on the LED installation.
    Pipe mount
    Mounting of LED fixtures on pipes or cylindrical poles.
    Piscina coperta LED
    LED lighting for indoor pools; IP65 and chlorine resistance.
    Pistola per silicone
    Silicone gun for applying sealing silicone on LED strips and profiles.
    Pitch (passo)
    Distance between the centers of two consecutive LEDs on the strip; influences uniformity.
    Pixel art (LED)
    Artistic installation with addressable LEDs forming images or animations.
    Pixel controller
    Controller dedicated to managing addressable LED strips pixel by pixel.
    Pixel density
    Number of addressable LEDs per meter; higher = higher resolution.
    Pixel depth
    Color resolution per LED pixel; 8 bit = 256 levels per channel.
    Pixel LED
    Single addressable LED in a strip; corresponds to a pixel of light.
    Pixel mapping
    Technique mapping video content onto addressable LED matrices or strips.
    Pixel pitch
    Distance between the centers of two adjacent LEDs; in high-density strips it is very small (< 5 mm).
    Pixel pitch (strip)
    Distance between the centers of two consecutive addressable LEDs.
    Placca dimmer LED
    Decorative faceplate for the wall-mounted LED dimmer.
    Plafon mount
    Ceiling mounting of flat LED fixtures like ceiling lights.
    Plafone LED
    Flat and compact ceiling-mounted LED fixture for general room lighting.
    Plafoniera LED
    Flat LED ceiling fixture for general lighting.
    Plafoniera LED per bagno
    IP44 LED ceiling fixture for bathroom lighting.
    Plafoniera LED per cucina
    LED ceiling fixture for general kitchen lighting.
    Plafoniera LED per soggiorno
    Dimmable LED ceiling fixture for the living room.
    Plan view
    Plan view of the LED lighting design project.
    Planar LED
    LED with emission on a flat surface; typical of COB.
    Planckiana (curva)
    Curve in the CIE diagram representing the colors emitted by a black body at different temperatures; reference for CCT.
    Planning software
    Software for designing and simulating LED installations.
    Plant growth LED
    LED with spectrum optimized for indoor plant growth.
    Plaster-in profile
    LED profile designed to be plastered into drywall; invisible.
    Plastic housing
    Plastic enclosure for LED power supplies and controllers.
    Plastic optic
    Plastic optics (PMMA, PC) for LED fixtures.
    Plate diffuser
    Flat diffuser for slim LED profiles.
    Platform lighting
    LED lighting for railway platforms and stations.
    Plenum cable
    Cable certified for installation in plenum spaces between ceilings.
    Plenum rated
    LED cable or fixture certified for installation in plenum spaces.
    Plinth lighting
    LED lighting of the base of furniture and kitchens.
    Plug adapter
    Adapter for different types of LED power supply plugs.
    Plug and play
    LED system working immediately after connection without configuration.
    Plug-in driver
    LED power supply with integrated plug for direct connection to the socket.
    Plug-in module
    Plug-in LED module for easy replacement.
    Plunge cut
    Plunge cut in drywall to create the seat for the recessed LED profile.
    PMT (Photomultiplier tube)
    Photomultiplier tube for laboratory LED measurements.
    PNP driver
    Driver circuit with PNP transistor for LEDs.
    PoE (Power over Ethernet)
    Technology providing power and data over a single Ethernet cable; used in smart LED systems.
    POE injector
    Device injecting power onto the Ethernet cable for PoE LEDs.
    Point of sale LED
    LED lighting for point-of-sale and display corners.
    Point source
    Light source concentrated in a point; a single LED is approximately so.
    Polarità della strip LED
    Orientation of the + and - terminals of the LED strip; to be respected.
    Polarity
    Orientation of the + and - terminals in LED strips; to be respected in connection.
    Polarity protection
    Circuit protecting the LED strip from polarity reversal.
    Polarizzazione (elettrica)
    Application of voltage to the LED junction to allow current flow.
    Pole mount
    Mounting of LED fixtures on a pole.
    Poliammide (PA)
    Thermoplastic polymer for mechanical components of LED systems.
    Policarbonato (PC)
    Impact-resistant polymer used for LED profile diffusers; less transparent than PMMA but more robust.
    Polietilene (PE)
    Polymer for sheaths and insulation of LED cables.
    Poliimmide
    Heat-resistant polymer used as a flexible substrate in printed circuits of LED strips.
    Poliimmide (PI)
    Heat-resistant polymer for the flexible substrate of LED strips.
    Polipropilene (PP)
    Polymer for LED containers and accessories.
    Polished aluminum
    Mirror-polished aluminum for internal reflectors of LED profiles.
    Polished finish
    Glossy finish on LED profiles for maximum reflection.
    Polishing (ottica)
    Polishing of LED lenses and diffusers for maximum transparency.
    Polistirene (PS)
    Transparent polymer for economical LED diffusers.
    Politica dei resi LED
    Conditions for the return of non-conforming LED products.
    Poliuretano (PU)
    Polymer for IP sealing resins and LED cable sheaths.
    Pollution degree
    Environmental pollution degree influencing insulation distances in the LED driver.
    Polyester film
    Polyester film used as insulator or reflector in LED fixtures.
    Polymer LED
    Polymer-based LED; variant of OLED.
    POM (acetale)
    Engineering polymer for gears and mechanisms of adjustable LED fixtures.
    Ponte di Graetz
    4-diode rectifier bridge for AC-DC conversion in the LED driver.
    Ponte di luce LED
    Luminous LED structure connecting two architectural elements.
    Ponte LED
    LED lighting for bridges and viaducts.
    Ponte raddrizzatore
    Circuit converting alternating current (AC) to direct current (DC) inside the LED power supply.
    Pool application
    IP68 underwater LED lighting for pools and fountains.
    Pool LED
    Underwater LED lighting for swimming pools; IP68 and chlorine resistance.
    Pop-in (diffusore)
    Push-in insertion system of the diffuser into the LED profile; quick mounting without tools.
    Pop-in diffuser
    Diffuser that snaps into the LED profile.
    Pop-up LED
    Retractable LED fixture emerging from the surface when activated.
    Portable controller
    Portable LED controller for testing and demonstration.
    Portable LED light
    Battery-powered portable LED light.
    Portata del telecomando LED
    Maximum operating distance of the remote control for the LED controller.
    Portatore di carica
    Electrons and holes flowing in the semiconductor LED.
    Portfolio progetti LED
    Collection of realized LED projects as references of the manufacturer.
    Portico LED
    LED lighting for porticoes and loggias.
    Posa del profilo LED
    Physical mounting of the LED profile on the surface.
    Posa della strip nel profilo
    Application of the LED strip in the seat of the aluminum profile.
    Posa in opera LED
    Physical installation of LED components on the construction site.
    Position sensor
    Sensor detecting position for activating LEDs at specific points.
    Positive lead
    Positive conductor (+) in the power cable of the LED strip.
    Positive temperature coefficient
    Characteristic of PTC fuses increasing resistance with temperature.
    Posizionamento della strip LED
    Placement of the strip in the profile for optimal light distribution.
    Posizione del punto di taglio
    Location of the cut mark on the LED strip.
    Post cap LED
    LED light for the top of pillars and posts.
    Post-installation test
    Functional test of the LED installation after completion.
    Pot life
    Working time of two-component resins and adhesives for LEDs.
    Pot light
    North American term for recessed LED downlight.
    Potentiometer
    Variable resistor for analog adjustment of LED brightness.
    Potenza (Watt, W)
    Unit of measurement of electrical power; in LED strips expressed in W/m.
    Potenza al metro strip 14.4W
    14.4 W/m LED strip for general lighting.
    Potenza al metro strip 19.2W
    19.2 W/m LED strip for task lighting.
    Potenza al metro strip 24W
    24 W/m LED strip for high-power lighting.
    Potenza al metro strip 4.8W
    4.8 W/m LED strip for decorative lighting.
    Potenza al metro strip 9.6W
    9.6 W/m LED strip for ambient lighting.
    Potenza al metro strip LED
    Consumption of the LED strip per linear meter; in Watts per meter.
    Potenza assorbita strip
    Actual electrical consumption of the LED strip; in Watts per meter.
    Potenza dell'alimentatore
    Power capacity in Watts of the LED power supply; must exceed the load by 20%.
    Potenza dell'impianto LED
    Total power absorbed by all LED components of the installation.
    Potenza installata per metro quadrato
    LED power density in the environment; in W/m2.
    Potenza necessaria impianto LED
    Total power required by the LED installation; for electrical sizing.
    Potenza nominale strip
    Power declared by the manufacturer for the LED strip; in W/m.
    Potenza ottica
    Radiant power emitted by the LED in the optical region.
    Potenza per metro (W/m)
    Electrical power absorbed per linear meter of LED strip; fundamental parameter for sizing the power supply.
    Potenza reattiva (VAR)
    Power that does not do useful work; from power supplies with low PF.
    Potenza totale impianto LED
    Sum of the power of all LED components of the installation.
    Potere risolutivo (ottica)
    Capacity of the LED optics to separate fine details.
    Potting
    Filling with resin of the LED power supply enclosure for protection.
    Potting compound
    Filling resin for IP protection of the LED power supply.
    Potting resin
    Two-component resin for sealing LED components.
    Power bus
    Power distribution line in a multi-strip LED system.
    Power cable
    Main power cable of the LED installation.
    Power cable AWG
    Gauge of the LED power cable according to the AWG scale.
    Power chain
    Power supply chain from the mains to the LED strip through the power supply.
    Power connector
    Power connector for LED strips and drivers.
    Power consumption
    Total electrical consumption of the LED installation including losses.
    Power coupling
    Electrical coupling between the power supply and the LED load.
    Power density
    Power density per unit area; W/m2 on the LED strip.
    Power derating
    Reduction of the nominal power of the LED power supply for high ambient temperature.
    Power distribution
    Distribution of electrical power to various points of the LED system.
    Power entry module
    Integrated module with socket, fuse, and switch for LED power supplies.
    Power factor correction (PFC)
    Circuit in the power supply improving the power factor.
    Power feed connector
    Power connector for electrified LED tracks.
    Power indicator
    LED indicator showing the presence of power.
    Power injection
    Power injection at multiple points along the LED strip to compensate for voltage drop over long runs.
    Power line communication (PLC)
    Communication via the existing power line for LED control.
    Power meter
    Instrument for measuring the power absorbed by the LED installation.
    Power monitoring
    Continuous monitoring of the energy consumption of the LED installation.
    Power over Ethernet injector
    Device adding power to the Ethernet cable for PoE LEDs.
    Power quality
    Quality of the electrical supply; affects the operation of LED drivers.
    Power rail
    Power rail integrated into an LED profile.
    Power redundancy
    Redundant power supply with multiple LED drivers for service continuity.
    Power regulation
    Stabilization of voltage or current in the LED power supply.
    Power sequencing
    Sequential power-up of LED power supplies to limit total inrush current.
    Power splitter
    Distributor dividing the power from one driver to multiple LED strips.
    Power strip (ciabatta)
    Power strip with protection for LED laboratory power supplies.
    Power supply unit (PSU)
    See Power supply. Power supply unit for LED systems.
    Power transformer
    Power transformer for powering LED installations.
    PPA (Poliftalammide)
    Heat-resistant polymer used in the package of SMD LED chips for stability at high temperatures.
    Pre-assembled kit
    Pre-assembled LED kit ready for quick installation.
    Pre-configured driver
    LED driver with parameters already set at the factory.
    Pre-cut strip
    LED strip pre-cut to the length specified by the customer.
    Pre-wired
    LED component with cables already connected and ready for installation.
    Pre-wired connector
    Connector with cables already attached ready for installation.
    Precision dimming
    High-resolution dimming for fine adjustments of brightness.
    Prelievo dal magazzino LED
    Operation of picking LED components from the warehouse for installation.
    Premium efficiency
    LED driver with efficiency above 95%.
    Preparazione del cantiere LED
    Preliminary activities before the installation of the LED installation.
    Preparazione della superficie
    Cleaning and degreasing of the surface before mounting the LED strip.
    Press fit
    Press-fit insertion of components into the LED profile without tools.
    Pressure equalizer
    Membrane equalizing the internal pressure of sealed LED fixtures.
    Pressure test
    Pressure test to verify the IP seal of LED fixtures.
    Prestazioni del sistema LED
    Set of luminous and electrical parameters of the LED installation.
    Prestazioni della strip LED
    Parameters of flux, efficiency, and color rendering of the LED strip.
    Preventivo dettagliato LED
    Analytical cost estimate item by item of the LED installation.
    Preventivo gratuito LED
    No-cost offer for the customer for the LED supply.
    Preventivo LED
    Cost estimate for the supply and installation of the LED installation.
    Preventivo per impianto LED
    Cost estimate for the realization of the LED installation.
    Prezzo al metro profilo
    Cost of the LED profile expressed per linear meter.
    Prezzo al metro strip
    Cost of the LED strip expressed per linear meter.
    Prezzo al pezzo LED
    Unit cost of a single LED component.
    Prezzo competitivo LED
    Advantageous quality-price ratio of LED products.
    Prezzo di listino LED
    Official price of the LED product published by the manufacturer.
    Prezzo per metro LED
    Cost of the LED strip expressed per linear meter.
    Prima accensione LED
    Initial test of the LED installation after installation to verify operation.
    Primary lens
    Primary lens integrated into the LED package for initial beam distribution.
    Primary optic
    Lens integrated into the LED package forming the base distribution.
    Primo avviamento LED
    First power-on of the LED installation after completion.
    Print head LED
    UV LED for curing ink in industrial printers.
    Printed circuit board
    See PCB. Base for the electronic components of the LED strip.
    Prismatic lens
    Lens with a prismatic surface for controlled LED distribution.
    Privacy lighting
    LED lighting designed not to disturb neighbors' privacy.
    Procedura di installazione LED
    Operational sequence for mounting the LED installation.
    Process control
    Control of the production process of LED strips for constant quality.
    Prodotto LED certificato
    LED item with all necessary conformity certifications.
    Prodotto LED di catalogo
    Standard LED item available in the catalog for immediate order.
    Prodotto LED di qualità
    LED item with professional-level performance and reliability.
    Prodotto LED disponibile
    LED item in stock for quick delivery.
    Prodotto LED su ordinazione
    Custom LED item produced on customer request.
    Prodotto personalizzato LED
    LED item made to the customer's specifications.
    Product certification
    Conformity certification of the LED product to current standards.
    Product data sheet
    Complete technical datasheet of the LED product with all parameters.
    Product family
    Family of LED products with common characteristics but variations in power, CCT, IP.
    Product lifetime
    Declared useful life of the LED product; typically 50,000-100,000 hours.
    Product traceability
    Traceability of the LED product from the chip batch to the finished product.
    Production line
    Automated production line for LED strips.
    Produttore LED
    Company manufacturing LED chips, strips, profiles, or fixtures.
    Produzione in serie LED
    Manufacturing of large quantities of standardized LED products.
    Profile adapter
    Adapter for connecting accessories of one model to a different LED profile.
    Profile aesthetic appearance
    Visual impact of an LED profile in a space when powered off and on.
    Profile bend
    Bending of the aluminum LED profile to follow architectural shapes.
    Profile bracket
    Specific bracket for mounting an LED profile.
    Profile cap
    End cap of the LED profile.
    Profile channel width
    Internal width of the profile channel for housing the LED strip.
    Profile connector
    Element connecting two sections of LED profile in continuity.
    Profile cross-section
    Transverse section of the LED profile; defines its shape and dimensions.
    Profile cutter
    Tool for precise cutting of aluminum LED profiles.
    Profile extension
    Extension of the LED profile to reach the desired length.
    Profile finish
    Surface finish of the profile: anodized, painted, brushed, RAL.
    Profile height
    Total height of the LED profile; determining factor for recessing.
    Profile inner width
    Internal useful width of the profile for housing the LED strip.
    Profile joiner
    Accessory for joining two sections of LED profile in continuity.
    Profile length
    Standard length of the LED profile (typically 1, 2, or 3 meters).
    Profile mounting clip
    Specific clip for fixing the LED profile to the surface.
    Profile section
    Transverse section of the LED profile; defines dimensions and shape.
    Profile wall thickness
    Thickness of the walls of the aluminum LED profile.
    Profile weight
    Weight per meter of the LED profile; for structural calculation of supports.
    Profile width
    Total external width of the LED profile.
    Profilo a C
    LED profile with a C-section for side mounting on surfaces.
    Profilo a H
    LED profile with an H-section for double light emission.
    Profilo a incasso
    LED profile that fits into a recess in the surface, flush or below the plane.
    Profilo a incasso per cartongesso
    LED profile for installation in drywall suspended ceilings.
    Profilo a incasso per legno
    LED profile for installation in a recess in wood.
    Profilo a incasso per soffitto
    LED profile for recessed installation in the ceiling.
    Profilo a L
    LED profile with an L-section for corners and edges.
    Profilo a omega
    LED profile with an omega section for DIN rail mounting.
    Profilo a parete
    LED profile designed for vertical surface mounting; may include a fixing wing.
    Profilo a pavimento
    Walkable LED profile with reinforced diffuser, for floor installation.
    Profilo a scomparsa
    LED profile completely hidden in the surface; invisible.
    Profilo a sospensione
    LED profile with a suspension kit of steel cables; pendant linear lighting.
    Profilo a sospensione LED
    LED profile suspended from the ceiling with cables for pendant lighting.
    Profilo a T
    LED profile with a T-section for integration in suspended ceilings.
    Profilo a taglio di luce
    LED profile creating a light slot in the ceiling or wall.
    Profilo a tutta lunghezza
    LED profile covering the entire length of the wall or ceiling.
    Profilo a U
    LED profile with a standard U-section for strip and diffuser.
    Profilo a V
    LED profile with a V-section for 90-degree angled installations.
    Profilo a vista (surface)
    LED profile to be applied directly to the surface without recess.
    Profilo a vista LED
    LED profile applied to the surface without recess.
    Profilo angolare
    LED profile with a V or L section, designed for installation in angles between walls, shelves, or furniture.
    Profilo angolare LED 45 gradi
    LED profile with a 45-degree V-section for internal angles.
    Profilo angolare LED 90 gradi
    LED profile with an L-section for 90-degree angles.
    Profilo asimmetrico
    Profile with a non-symmetrical section for directional emission.
    Profilo bifacciale
    LED profile with luminous emission on two opposite sides.
    Profilo calpestabile
    Reinforced LED profile with tempered glass or high-strength polycarbonate diffuser for walkable areas.
    Profilo circolare
    LED profile with a round section creating a cylindrical luminous effect; used as a pendant or decorative element.
    Profilo con aletta
    LED profile with a side flange for mechanical fixing.
    Profilo con guida diffusore
    LED profile with a groove for sliding insertion of the diffuser.
    Profilo con passaggio cavi
    LED profile with an internal channel for orderly cable routing.
    Profilo con riflettore
    LED profile with an internal reflector for controlled light distribution.
    Profilo con sensore integrato
    LED profile with integrated proximity or motion sensor.
    Profilo continuo
    System of connectable LED profiles for uninterrupted light lines.
    Profilo curvo a raggio fisso
    LED profile pre-bent with a fixed radius defined in production.
    Profilo curvo a raggio variabile
    Flexible LED profile adapting to different bending radii.
    Profilo da cartongesso
    LED profile specifically for invisible integration in drywall ceilings and walls.
    Profilo da cartongesso con stucco
    LED profile for recess in drywall with plaster finish.
    Profilo da controsoffitto Armstrong
    LED profile specifically for the 600x600 mm Armstrong grid.
    Profilo da cornice
    LED profile shaped as an architectural frame for perimeter lighting.
    Profilo da corrimano
    LED profile integrated into the handrail of stairs and balustrades.
    Profilo da cucina LED
    LED profile for under-cabinet and task lighting in the kitchen.
    Profilo da esterno IP65
    LED profile with IP65 protection for covered outdoor installations.
    Profilo da esterno IP67
    LED profile with IP67 protection for exposed outdoor installations.
    Profilo da esterno LED IP65
    LED profile for outdoor installations with IP65 protection.
    Profilo da gradino
    LED profile for lighting stairs and steps; improves safety and aesthetics.
    Profilo da gradino antiscivolo
    LED profile for steps with integrated anti-slip surface.
    Profilo da guardaroba
    Slim LED profile for interior lighting of wardrobes and cabinets.
    Profilo da mensola
    LED profile for mounting under shelves and racks.
    Profilo da mobile
    Miniaturized LED profile for integration into furniture and furnishings.
    Profilo da parapetto
    LED profile for integration into parapets and railings.
    Profilo da soffitto teso
    LED profile specifically for integration with stretched PVC ceilings.
    Profilo da specchiera
    Perimeter LED profile designed for lighting bathroom or vanity mirrors.
    Profilo da vetrina
    LED profile for internal lighting of display windows.
    Profilo da zoccolino
    LED profile integrated into the baseboard for floor-level lighting.
    Profilo deep (profondo)
    LED profile with a higher-than-average section; allows greater distance between LED and diffuser for superior uniformity.
    Profilo doppia emissione
    LED profile emitting light both downwards and upwards.
    Profilo extra largo
    LED profile with a width greater than 30 mm for double strips.
    Profilo extra slim
    LED profile with a height less than 7 mm for minimal installations.
    Profilo flessibile
    LED profile in silicone or bendable aluminum to follow curves and non-linear shapes.
    Profilo illuminazione indiretta
    LED profile designed for emission towards the ceiling or wall.
    Profilo LED
    Extruded aluminum bar housing the LED strip and diffuser; ensures dissipation, protection, and aesthetic finish.
    Profilo LED per bagno
    Profile with IP protection for LED lighting of the bathroom.
    Profilo LED per camera
    Slim LED profile for bedroom lighting.
    Profilo LED per corridoio
    LED profile for continuous lighting of corridors and hallways.
    Profilo LED per cucina
    LED profile for under-cabinet and task lighting in the kitchen.
    Profilo LED per esterno
    LED profile with IP protection for outdoor installations.
    Profilo LED per interno
    Standard LED profile for installations in dry indoor environments.
    Profilo LED per negozio
    LED profile for lighting displays and shelves in retail.
    Profilo LED per soggiorno
    LED profile for indirect and atmospheric lighting in the living room.
    Profilo LED per ufficio
    Suspended or recessed LED profile for efficient office lighting.
    Profilo magnetico
    LED profile with magnetic mounting system for easy repositioning.
    Profilo micro
    LED profile with dimensions less than 10x10 mm.
    Profilo modulare
    Composable LED profile in connectable segments for flexible configurations.
    Profilo per doppia strip
    LED profile sized to house two side-by-side LED strips.
    Profilo per gradino con nose
    LED profile with a protruding edge for the step tread.
    Profilo per neon flex
    Mounting profile specifically for LED neon flex.
    Profilo per scale
    Specific profile for step backlighting.
    Profilo per strip COB
    LED profile optimized for COB strips; optimal distance from the diffuser.
    Profilo per strip da 10 mm
    LED profile with a standard channel for 10 mm strips.
    Profilo per strip da 12 mm
    LED profile with a wide channel for 12 mm strips.
    Profilo per strip da 5 mm
    LED profile with a narrow channel for 5 mm wide strips.
    Profilo per strip da 8 mm
    LED profile with a channel for 8 mm wide strips.
    Profilo per vetro
    LED profile with clips for fixing on glass sheets.
    Profilo personalizzato
    LED profile with a custom cross-section designed for the specific project.
    Profilo quadrato
    LED profile with a square section for geometric design.
    Profilo rettangolare
    LED profile with a standard rectangular section.
    Profilo rotondo
    LED profile with a circular section for pendants and designer installations.
    Profilo senza diffusore
    Open LED profile without a cover; for direct emission.
    Profilo slim
    LED profile with a very small section (height ≤7 mm) for ultra-flat and discreet installations.
    Profilo slim LED
    Ultra-thin LED profile with a height less than 10 mm.
    Profilo sottopensile
    LED profile designed to be mounted under cabinets and shelves; typical application in kitchens.
    Profilo su misura
    LED profile cut and configured to the required length and with the requested accessories.
    Profilo trimless
    Recessed LED profile without a visible edge; perfectly flush.
    Profilo waterproof
    LED profile with complete sealing for IP67/IP68 protection.
    Profondità del canale profilo
    Vertical dimension of the seat housing the LED strip in the profile.
    Profondità del profilo LED
    Vertical dimension of the profile; determines the recess depth.
    Profondità di fresatura LED
    Thickness of material to be removed for the seat of the recessed profile.
    Profondità di incasso
    Measurement of the milling thickness required to house a recessed LED profile.
    Profondità minima incasso
    Minimum space required above the recessed LED profile.
    Progettazione dell'illuminazione LED
    Study and sizing of the LED installation by the designer.
    Progettista illuminotecnico
    Professional designing LED lighting installations.
    Progettista illuminotecnico LED
    Professional specialized in the design of LED installations.
    Progettista LED
    Professional specialized in the design of LED installations.
    Progetto chiavi in mano LED
    Complete service: design, supply, installation, and testing of LEDs.
    Progetto completo LED
    Complete documentation of the LED project: calculations, layout, specifications.
    Progetto definitivo LED
    LED project with all details for installation.
    Progetto di illuminazione LED
    Set of study and sizing activities for the LED installation.
    Progetto esecutivo LED
    Final project with all details for the realization of the LED installation.
    Progetto illuminotecnico preliminare
    First phase of the LED project with layout and preliminary calculations.
    Progetto preliminare LED
    First study phase of the LED installation with layout and calculations.
    Programmable scene
    Lighting scene programmable by the user in the LED controller.
    Programmable timer
    Programmable timer for time-based automation of LED lighting.
    Programmazione a scene
    Storage of predefined lighting scenarios (intensity, color, zone) recallable with a command.
    Programmazione degli scenari LED
    Storage of combinations of brightness and color in the controller.
    Programmazione oraria LED
    Setting the on/off times of LED lighting.
    Progress indicator LED
    LED bar indicating the progress status of a process.
    Proiettore LED
    High-power directional fixture for outdoor lighting.
    Project documentation
    Complete technical documentation of the LED lighting design project.
    Project specification
    Detailed technical specification of LED requirements for a project.
    Projection distance
    Distance between the LED fixture and the illuminated surface.
    Projection effect LED
    Projection effect created with LEDs and masks or gobos.
    Promozione prodotti LED
    Commercial offer with discounts on LED products.
    Promozione stagionale LED
    Commercial offer linked to a specific period for LED products.
    Pronta consegna LED
    LED product available for immediate shipment.
    Proof of concept
    Demonstrative prototype of an LED system before production.
    Proportional dimming
    Dimming proportional to the input signal.
    Proposta commerciale LED
    Economic offer for the supply of the LED installation.
    Proposta di risparmio LED
    Document quantifying the energy savings of switching to LED.
    Proposta di valore LED
    Set of benefits offered by the LED product to the customer.
    Protected output
    Output of the LED power supply protected against short circuits and overload.
    Protective coating
    Protective coating applied to LED strips for IP protection.
    Protective cover
    Removable protective cover on unused LED connectors.
    Protective earth (PE)
    Protective earth conductor; mandatory for Class I fixtures.
    Protezione da cortocircuito (SCP)
    Safety circuit in the power supply that shuts it down in case of short circuit on the outputs.
    Protezione da sovraccarico (OLP)
    Protection system in the power supply that limits power in case of excessive load.
    Protezione da sovratemperatura (OTP)
    Protection circuit reducing or shutting down the power supply in case of excessive temperature.
    Protezione IP alimentatore LED
    Environmental protection rating of the LED power supply.
    Protezione IP profilo LED
    Environmental protection rating of the assembled LED profile.
    Protezione IP strip LED
    Environmental protection rating of the LED strip.
    Protezione surge (SPD)
    Protection against transient overvoltages of the mains.
    Protocol converter
    Device converting between different LED protocols (e.g., DMX to DALI).
    Protocollo ArtNet 4
    Version 4 of the Art-Net protocol for transporting DMX over Ethernet.
    Protocollo BACnet/IP
    IP version of the BACnet protocol for building automation with LEDs.
    Protocollo Bluetooth 5.0
    Version 5.0 of Bluetooth with improved range and speed for LEDs.
    Protocollo Bluetooth Mesh 1.1
    Updated version of Bluetooth Mesh for LED networks.
    Protocollo DALI DT6
    Device Type 6 of the DALI standard for LED drivers.
    Protocollo DALI DT8
    Device Type 8 of the DALI standard for LED color control.
    Protocollo DMX RDM
    Remote Device Management for bidirectional LED configuration.
    Protocollo EnOcean
    Wireless energy-harvesting protocol for battery-free LED control.
    Protocollo KNX Secure
    Secure version of the KNX protocol with encryption for LEDs.
    Protocollo KNX/IP
    IP version of the KNX protocol for LED management over Ethernet.
    Protocollo Loxone Tree
    Wired Loxone protocol for LED lighting control.
    Protocollo Matter 1.0
    Matter interoperability standard for smart home LED devices.
    Protocollo MQTT LED
    Use of the MQTT protocol for IoT control of LED lighting.
    Protocollo Philips Hue
    Proprietary Philips protocol for controlling Hue LED lamps and strips.
    Protocollo sACN E1.31
    ANSI E1.31 standard for streaming DMX data over Ethernet.
    Protocollo Thread 1.3
    Version 1.3 of the Thread protocol for mesh LED networks.
    Protocollo Tuya
    Tuya IoT platform for smart Wi-Fi LED controllers.
    Protocollo Wi-Fi HaLow
    Wi-Fi 802.11ah long-range and low-power for smart LEDs.
    Protocollo Z-Wave Long Range
    Long-range version of the Z-Wave protocol for LEDs.
    Protocollo Zigbee Green Power
    Zigbee profile for battery-free LED devices.
    Prototipazione
    Creation of samples and preliminary tests of an LED system before mass production.
    Prova di funzionamento LED
    Test of the LED installation to verify correct operation.
    Proximity dimming
    Automatic dimming based on the user's distance from the sensor.
    Proximity switch
    Proximity switch for contactless LED activation.
    PTFE (teflon)
    Polymer with excellent chemical and thermal resistance for special LED cables.
    Puck light
    Small circular LED fixture for under-cabinet lighting.
    Pulizia del diffusore LED
    Maintenance operation to remove dust and dirt from the diffuser.
    Pull switch
    Pull switch for turning on LEDs in cabinets and storage rooms.
    Pulsating light
    LED light with rhythmic intensity variation; for signaling.
    Pulse frequency
    Frequency of pulses in the PWM dimming signal.
    Pulse start
    Pulse start of discharge lamps; not needed for LEDs.
    Punch-down connector
    Insulation-piercing connector for quick wiring.
    Punto di alimentazione LED
    Position where the cable connects to the LED strip.
    Punto di connessione LED
    Position where two sections of LED strip or strip and cable connect.
    Punto di forza LED
    Competitive advantage of LED technology over alternatives.
    Punto di taglio strip
    Mark on the LED strip indicating where the circuit can be cut.
    Punto luce LED
    Single LED fixture or profile in the lighting installation.
    Punto vendita LED
    Physical or online store selling LED products.
    PUR cable
    Cable with polyurethane sheath; abrasion-resistant for mobile LED installations.
    Purging
    Process of removing moisture from a sealed LED profile before sealing.
    Purlin mount
    Mounting of LED fixtures on purlins and roof structures.
    Purple LED
    Purple LED (380-420 nm); for decorative effects and UV applications.
    Push button interface
    Interface for connecting traditional buttons to the LED control system.
    Push-fit connector
    Quick push-in connector for LED strips.
    Push-in connector
    Screwless connector with push-in cable insertion; simplifies wiring of LED installations.
    PVC (cloruro di polivinile)
    Plastic material used for cable sheaths and IP coating of some LED strips.
    PVC conduit
    PVC tube for protecting LED cables.
    PVC profile
    PVC profile for housing LED strips; economical alternative to aluminum.
    PWM (Pulse Width Modulation)
    Pulse width modulation; dimming technique varying the on/off ratio of the high-frequency signal. ↑ Back to top

    Q

    Q-factor
    Quality factor of a resonant circuit; in LED drivers it influences filtering.
    QA inspection
    Quality control inspection on LED products in production.
    QA manager
    Quality control manager in LED production.
    QA procedure
    Quality control procedure for LED products.
    QA report
    Quality control report with LED test results.
    QA standard
    Quality standard applied to the production of LED components.
    QA test
    Quality control test performed on LED products.
    QC (Quality Control)
    Quality control during the production of LED strips, profiles, and power supplies to ensure compliance with standards.
    QLC+ (software)
    Open-source software for DMX control of LED installations.
    QR code (su strip)
    QR code printed on LED strips for traceability and specifications.
    Quad-color LED
    LED with four dies (e.g., RGBW) in the same package.
    Quadrant detection
    Spatial quadrant detection for LED systems with position sensors.
    Qualified electrician
    Qualified electrician for the installation of LED installations.
    Qualified installer
    Qualified and certified installer for professional LED systems.
    Qualified product list
    List of qualified and approved LED products for the project.
    Qualità certificata LED
    LED products with internationally recognized quality certifications.
    Qualità costruttiva profilo
    Quality level of the production of the aluminum LED profile.
    Qualità del biadesivo strip
    Performance and durability of the adhesive on the back of the LED strip.
    Qualità del chip LED
    Performance and reliability level of the LED chip in the strip.
    Qualità del driver LED
    Performance, efficiency, and reliability level of the LED power supply.
    Qualità della finitura profilo
    Uniformity and durability of the surface finish of the LED profile.
    Qualità della luce LED
    Set of parameters defining the quality of light: CRI, CCT, uniformity, UGR.
    Qualità della saldatura strip
    Quality of the solder joints on the LED strip; reliability of contacts.
    Qualità ottica del diffusore
    Uniformity, transmittance, and absence of defects of the LED cover.
    Qualitative assessment
    Qualitative assessment of LED lighting in an environment.
    Qualitative lighting
    LED lighting evaluated not only for quantity but for perceived quality.
    Quality assurance (QA)
    Quality assurance system in the production of LED components.
    Quality audit
    Quality audit of the LED production process.
    Quality bin
    Quality group in the binning process of LED chips.
    Quality certificate
    Quality certificate of the LED product issued by the manufacturer.
    Quality control chart
    Quality control chart for the production of LED strips.
    Quality control inspector
    Quality control inspector in the LED strip factory.
    Quality control process
    Quality control process in the production of LED strips.
    Quality control test
    Specific test in the LED quality control process.
    Quality grade
    Quality grade of the LED product: standard, premium, professional.
    Quality improvement
    Continuous improvement of the quality of LED products.
    Quality management system
    Quality management system in LED production; ISO 9001.
    Quality specification
    Quality specifications required for LED products in the project.
    Quality standard compliance
    Compliance with quality standards in LED production.
    Quality test certificate
    Certificate of quality tests performed on the batch of LED products.
    Quantitative analysis
    Quantitative analysis of the performance of the LED installation.
    Quantum dot
    Semiconductor nanocrystal that, stimulated by blue LED light, emits pure and saturated colors; emerging technology for displays and lighting.
    Quantum efficiency
    Quantum efficiency of the LED chip; ratio of emitted photons/injected electrons.
    Quantum well
    Quantum well in the semiconductor LED where light emission occurs.
    Quarter-turn fastener
    Quarter-turn fixing for quick mounting of LED fixtures.
    Quarter-wave coating
    Quarter-wave anti-reflective coating on LED lenses.
    Quarter-wave plate
    Optical element modifying the polarization of LED light.
    Quasi-monochromatic
    LED with a very narrow emission spectrum; almost monochromatic.
    Quasi-resonant converter
    Quasi-resonant converter in the LED driver for high efficiency and low noise.
    Quasi-static test
    Slow-variation parameter test to characterize LED performance.
    Quay lighting LED
    LED lighting for quays and docks.
    Quench (spegnimento)
    Process of rapid LED shutdown for testing or protection.
    Quenching circuit
    Rapid shutdown circuit for LED protection.
    Queue management LED
    LED display for queue management in offices and shops.
    Quick change connector
    Quick-change connector for fast maintenance of the LED system.
    Quick clamp
    Quick clamp for temporary fixing of LED profiles.
    Quick connect
    Quick connection system for LED strips and cables.
    Quick coupling
    Quick coupling for plug-and-play connections of LED strips.
    Quick disconnect
    Quick-disconnect connector for fast maintenance.
    Quick install bracket
    Bracket for quick installation of the LED profile without tools.
    Quick install clip
    Clip for quick mounting of the LED profile with a click.
    Quick installation kit
    Kit for quick installation of LED profiles with snap-on clips.
    Quick mount system
    Quick mounting system for professional LED profiles.
    Quick release bracket
    Quick-release bracket for maintenance of LED fixtures.
    Quick release diffuser
    Quick-release diffuser for easy access to the LED strip.
    Quick splice connector
    Quick splice connector for LED cables without tools.
    Quick start
    Quick startup without delay of the LED fixture.
    Quiescent current
    Quiescent current of the LED power supply in standby.
    Quiet driver
    Silent LED power supply without audible hum.
    Quiet operation
    Silent operation of the LED power supply; absence of acoustic noise.
    Quota di incasso
    Dimension of the seat to be routed or prepared in the support to house a recessed LED profile. ↑ Back to top

    R

    R1-R15 (campioni CRI)
    The 15 standardized CIE color samples used to calculate the detailed color rendering index of an LED.
    R9 (rosso saturo)
    Specific CRI sample measuring the rendering of saturated red; essential for food, art, and retail applications.
    Ra (indice)
    Arithmetic mean of samples R1-R8 for color rendering.
    Raccoglitore di dati LED
    Device recording the operating parameters of the LED installation.
    Raccomandazione illuminotecnica
    Technical recommendation for the correct design of the LED installation.
    Raccordo a croce profilo
    Element connecting four LED profiles in a cross.
    Raccordo a T profilo
    Element connecting three LED profiles in a T.
    Raccordo angolare profilo
    Element connecting two LED profiles at an angle.
    Raccordo curvo profilo
    Curved element connecting two LED profiles in a curve.
    Raccordo flessibile
    Flexible element connecting LED profiles on irregular surfaces.
    Raceway
    Raceway for routing and protecting LED cables.
    Rack mount
    Mounting of LED equipment (controllers, power supplies) in a standard 19-inch rack.
    Rack mount driver
    LED power supply for mounting in a 19-inch rack.
    Radar sensor
    Microwave radar sensor for presence and motion detection for LEDs.
    Radial distribution
    Radially symmetric light distribution of the LED fixture.
    Radial fin heatsink
    Heat sink with radial fins for circular LED fixtures.
    Radial symmetry
    Rotational symmetry of the LED light distribution.
    Radiance
    Radiant power per unit area and solid angle; in W/sr/m2.
    Radiant efficiency
    Ratio between radiant power emitted and electrical power absorbed by the LED.
    Radiant flux
    Total radiant power emitted by the LED; in Watts.
    Radianza (LED)
    Radiant power per unit area and solid angle emitted by the LED.
    Radiation angle
    Radiation angle of the LED beam.
    Radiation cooling
    Cooling by radiation from the surface of the LED profile.
    Radiation efficiency
    Radiative efficiency of the surface of the LED profile.
    Radiation pattern
    Radiation pattern of the LED; similar to the photometric curve.
    Radiatore
    See "Heat sink". Metal element for dissipating heat from LEDs.
    Radiazione infrarossa LED
    IR component in LED light; negligible in quality white LEDs.
    Radiazione ultravioletta LED
    UV component in LED light; negligible in quality white LEDs.
    Radiazione UV
    Ultraviolet component of the spectrum; quality LEDs emit negligible UV, unlike fluorescent lamps.
    Radiazione visibile LED
    Visible component (380-780 nm) of the light emitted by the LED.
    Radio controlled clock
    Radio-controlled clock for time synchronization of the LED installation.
    Radio frequency controller
    LED controller based on radio frequency communication.
    Radio frequency dimmer
    Radio frequency dimmer for wireless LED control.
    Radio frequency shielding
    RF shielding to prevent interference with wireless LED controllers.
    Radio interference
    Radio interference that can disturb wireless LED controllers.
    Radio modem LED
    Radio modem for wireless communication between LED controllers.
    Radiometro
    Instrument for measuring the radiant power of the LED.
    Raggio di curvatura
    Minimum radius within which a flexible LED strip or neon flex can be bent without damage.
    Rail adapter
    Adapter for mounting LED fixtures on rails and guides.
    Rail clip
    Clip for fixing LED fixtures on rails and guides.
    Rail connector
    Electrical connector for joining sections of LED track.
    Rail end cap
    End cap of the electrified LED track.
    Rail joint connector
    Connector for joining sections of LED track.
    Rail mounting clip
    Clip for DIN rail mounting of LED power supplies.
    Rail section
    Section of the electrified LED track.
    Rail suspension kit
    Suspension kit for the LED track from the ceiling.
    Rain cover
    Rain cover for semi-exposed LED fixtures.
    Rain guard
    Rain protection for semi-exposed LED fixtures.
    Rain rated
    LED fixture certified for exposure to rain.
    Rain sensor
    Rain sensor for automatic management of outdoor LED lighting.
    Rainbow effect
    Rainbow effect on RGB addressable LED strips with color transitions.
    Rainproof enclosure
    Rainproof enclosure for LED power supplies.
    Raised floor lighting
    LED lighting under the raised technical floor.
    Rame (conduttore)
    Metal with high electrical conductivity for the tracks of the LED strip PCB.
    Rame OFC
    Oxygen-free copper for low-resistance LED conductors.
    Ramp dimming
    Dimming with a gradual programmable transition.
    Ramp function
    Ramp function for gradual on/off of LEDs.
    Ramp rate setting
    Setting of the ramp speed for LED dimming.
    Ramp-down time
    Gradual decrease time of LED brightness to off.
    Ramp-up time
    Gradual increase time of LED brightness to on.
    Random access
    Capability to address and control each LED individually in an addressable strip.
    Random color effect
    Random color change effect on addressable LED strips.
    Range extender
    Device extending the range of a wireless LED network.
    Range finder (sensore)
    Distance sensor for proximity control of LEDs.
    Range test
    Range test to verify wireless LED communication.
    Rapid installation
    Quick installation of the LED system thanks to plug-and-play components.
    Rapid start
    Quick startup of an LED tube; without preheating delay.
    Rapporto annuale LED
    Document with the performance of the LED market during the year.
    Rapporto costo-efficienza LED
    Evaluation of the LED product based on the ratio of cost to performance.
    Rapporto di collaudo LED
    Document certifying the successful completion of the final test of the LED installation.
    Rapporto di contrasto LED
    Ratio between maximum and minimum illuminance created by the LED installation.
    Rapporto di misura LED
    Document with the results of measurements on the LED installation.
    Rapporto di progetto illuminotecnico
    Document with calculations and specifications of the LED installation.
    Rapporto di progetto LED
    Document collecting calculations, specifications, and layout of the LED installation.
    Rapporto di uniformità U0
    Ratio between minimum and average illuminance; target >0.6 for LEDs.
    Rapporto di uniformità Ud
    Ratio between minimum and maximum illuminance; for LED distribution.
    Rapporto lumen/euro
    Cost per lumen purchased; indicator of value of the LED product.
    Rapporto lumen/watt
    See "Luminous efficacy". Indicator of the energy efficiency of an LED source.
    Rapporto qualità LED
    Document on the quality of the manufacturer's LED products.
    Rapporto qualità-prezzo LED
    Evaluation of the LED product based on the ratio of performance to cost.
    Rapporto tecnico LED
    Document with analysis and results of the performance of the LED installation.
    Rassegna prodotti LED
    Overview of LED products available on the market.
    Ratchet mount
    Ratchet mounting for angular adjustment of LED fixtures.
    Rate of change
    Speed of change of LED brightness or color.
    Rated ambient temperature
    Nominal ambient temperature for the declared performance of the LED.
    Rated input voltage
    Nominal input voltage of the LED power supply.
    Rated lifetime
    Useful life declared by the manufacturer for an LED component.
    Rated luminous flux
    Nominal luminous flux declared by the LED strip manufacturer.
    Rated power
    Nominal power declared for the LED strip or power supply.
    Rated wattage
    Nominal power declared for the LED strip or fixture.
    Rating plate
    Rating plate of the LED fixture with technical information.
    Raw LED chip
    LED chip before mounting in the package.
    Raw lumen
    Luminous flux of the LED chip alone before optical and thermal losses.
    Raw material
    Raw material for the production of LED strips: copper, aluminum, silicone, phosphors.
    Raw material inspection
    Inspection of raw materials for LED production.
    RDM (Remote Device Management)
    Bidirectional protocol based on DMX512 enabling remote configuration and monitoring of LED devices.
    Re-lamping plan
    Plan for the scheduled replacement of light sources with LEDs.
    REACH compliance
    Compliance with European REACH regulations on chemicals in LED products.
    Reactance
    Reactive component of impedance in the LED circuit.
    Reactance ballast
    Impedance ballast; replaced by electronic LED drivers.
    Reactive power compensation
    Compensation of the reactive power of the LED power supply to improve PF.
    Reading light LED
    LED reading light with directional beam and dimming.
    Ready-to-install
    Pre-assembled LED product ready for immediate installation.
    Real estate LED
    LED lighting for real estate enhancement.
    Real time monitoring
    Real-time monitoring of the operating parameters of the LED installation.
    Real-time clock (RTC)
    Internal clock of the LED controller for time-based programming.
    Real-time control
    Real-time control of LED lighting.
    Real-time data
    Real-time data on the performance of the LED installation.
    Real-time feedback
    Real-time feedback from the LED system to the controller.
    Reattanza
    Reactive component of impedance in a circuit; in LED drivers it is managed for power factor.
    Reazione chimica (fosforo)
    Chemical process in the phosphor converting blue LED light to white.
    Rebate program
    Incentive program for replacing with LED lighting.
    Reception LED
    LED lighting for reception and front desk; welcoming.
    Reception counter LED lighting
    LED lighting for reception counters for scenic effects.
    Recess depth
    Recess depth required for a recessed LED profile.
    Recess kit
    Kit for recessed mounting of the LED profile in the surface.
    Recess slot
    Slot in the surface for inserting the recessed LED profile.
    Recessed adapter
    Component that facilitates insertion of an LED profile into a milled housing.
    Recessed ceiling slot
    Recessed slot in the ceiling for LED profile.
    Recessed channel
    Recessed channel in the surface for housing the LED profile.
    Recessed downlight
    LED downlight completely recessed in the ceiling.
    Recessed end cap
    End cap for recessed LED profiles.
    Recessed floor light
    LED light recessed in the floor for signage and decoration.
    Recessed housing
    Housing for recessed mounting of the LED fixture.
    Recessed linear LED
    Linear LED profile for recessed installation.
    Recessed mounting depth
    Depth required for recessed mounting of the LED profile.
    Recessed profile
    LED profile designed for recessed installation.
    Recessed slot profile
    LED profile for a recessed slot in the ceiling or wall.
    Recessed step light
    LED light recessed in the step for staircase lighting.
    Recessed trim
    Frame for recessed mounting of the LED fixture.
    Recessed uplight
    LED light recessed in the floor with upward emission.
    Recessed wall light
    LED light recessed in the wall for corridor lighting.
    Recessed wall washer
    Recessed LED fixture uniformly illuminating the wall.
    Recesso (profilo a)
    Recessed profile in the surface.
    Recharge cycle
    Recharge cycle of the battery of the emergency LED module.
    Rechargeable battery
    Rechargeable battery for emergency LED modules.
    Rechargeable battery / Accumulator
    Rechargeable electrochemical device used as an energy reserve for emergency LED systems.
    Rechargeable LED light
    Portable LED light with rechargeable battery.
    Reciprocity (illuminotecnica)
    Reciprocity principle in LED light distribution.
    Reclaimed wood LED
    LED lighting integrated into reclaimed wood for sustainable design.
    Reclamation LED
    LED lighting for reclaimed and recovered areas.
    Recognition distance
    Distance at which emergency LED signage is recognizable.
    Recommended application
    Environment type recommended by the manufacturer for a specific LED product.
    Recommended dimmer list
    List of recommended dimmers compatible with the LED driver.
    Recommended mounting height
    Recommended mounting height for the LED fixture.
    Recommended wiring
    Recommended wiring diagram for the LED installation.
    Recommissioning
    Reconfiguration of the LED installation after modifications or expansions.
    Recording studio LED
    LED lighting for recording studios; flicker-free and dimmable.
    Recovery mode
    Recovery mode of the LED controller after a fault.
    Recovery time
    Recovery time of the power supply after a protection intervention.
    Rectangular beam
    Rectangular LED beam obtained with asymmetric optics.
    Rectangular profile
    LED profile with a standard rectangular section.
    Rectifier
    Rectifier converting AC to DC; present in every LED power supply.
    Rectilinear layout
    Rectilinear arrangement of LED fixtures in orderly rows.
    Red LED
    LED emitting red light (620-635 nm); component of the RGB system and present in RGBW strips.
    Red LED (625-635 nm)
    Red LED; component of the RGB system with a wavelength of 625-635 nm.
    Red shift
    Red shift of the LED spectrum due to temperature increase.
    Reduced voltage
    Reduced voltage; LEDs operate at low DC voltage for safety.
    Redundancy
    Duplication of critical components to ensure continuity of LED lighting.
    Redundant controller
    Backup LED controller that takes over in case of failure of the main one.
    Reference design
    Reference design provided by the LED chip manufacturer for strip development.
    Reference standard
    Reference standard for calibrating LED measuring instruments.
    Referenza installazione LED
    Realized LED project as an application example.
    Referenze di installazione LED
    List of realized LED projects as examples of expertise.
    Reflectance
    See Reflection coefficient. Percentage of reflected light.
    Reflectance map
    Map of the reflectances of the surfaces of an environment for LED calculation.
    Reflection angle
    Angle of the reflected ray relative to the normal.
    Reflective ceiling plan (RCP)
    Reflective ceiling plan; drawing showing the position of LED fixtures.
    Reflective surface
    Surface with high reflectance contributing to indirect LED lighting.
    Reflective tape
    Reflective tape applied in the LED profile to increase useful flux.
    Reflector cone
    Internal cone reflector in an LED downlight to control the beam.
    Reflector cup
    Reflector cup in the package of high-power LEDs.
    Reflector design
    Design of the reflector to optimize LED light distribution.
    Reflector material
    Reflector material: specular aluminum, metallized plastic.
    Reflector profile
    LED profile with an integrated internal reflector for controlled distribution.
    Reflow oven
    Reflow oven for soldering SMD components on the LED strip.
    Refresh rate
    Refresh rate of the signal on addressable LED strips.
    Regola automazione LED
    Conditional rule: if sensor detects X then LED does Y.
    Regolatore buck-boost
    DC-DC converter regulating voltage both up and down for LEDs.
    Regolatore di tensione
    Integrated circuit stabilizing the supply voltage to a constant value for LEDs.
    Regolatore flyback
    Isolated converter for constant-current LED drivers.
    Regolatore lineare LDO
    Low-dropout regulator for auxiliary circuits in the LED driver.
    Regolazione del colore LED
    Variation of the color emitted by the RGB LED strip via controller.
    Regolazione della CCT LED
    Variation of the color temperature of the tunable white strip.
    Regolazione della luminosità LED
    Variation of the luminous intensity of LEDs via dimmer.
    Regulation accuracy
    Accuracy of voltage or current regulation in the LED power supply.
    Relamping
    Replacement of traditional light sources with LEDs; retrofit is the more complete version.
    Relay control
    On/off control of LED circuits via relays.
    Relay module
    Relay module for on/off control of LED circuits from home automation systems.
    Relè
    Electromechanical switch electrically controlled; used to turn on/off LED circuits from home automation systems.
    Reliability test
    Reliability test on LED components with thermal and current cycles.
    Relux
    Lighting calculation software alternative to DIALux.
    Relux Desktop
    Lighting calculation software alternative to DIALux.
    Relux plugin
    Manufacturer plugin for Relux.
    Remote control
    Remote control for wireless management of LED controllers.
    Remote dimming
    Remote dimming via remote control or app.
    Remote maintenance
    Remote maintenance of the LED installation via remote access.
    Remote monitoring
    Remote monitoring of the operating parameters of the LED installation.
    Remote phosphor
    Technology where the phosphor is located away from the LED chip (on the diffuser); improves efficiency and chromatic uniformity.
    Remote power supply
    LED power supply located at a distance from the fixture for ease of access.
    Rendering engine
    Rendering engine for 3D visualization of LED lighting projects.
    Rendering illuminotecnico
    Photorealistic visualization of the LED lighting effect in the project.
    Rendering notturno
    Visualization of the LED lighting effect in nighttime conditions.
    Rendimento dell'alimentatore LED
    Efficiency of the LED driver; ratio of output/input power.
    Rendimento dell'impianto LED
    Overall efficiency of the LED installation: source + driver + optics.
    Rendimento della strip LED
    Luminous efficacy of the LED strip; in lumens per Watt.
    Rendimento luminoso
    See "Luminous efficacy (lm/W)". Ratio between emitted flux and absorbed power.
    Renovation lighting
    LED lighting designed for the renovation of existing buildings.
    Repeater
    Device regenerating and amplifying the signal for extended LED runs.
    Repeater unit
    Repeater unit extending the LED control signal over long distances.
    Replaceability
    Ease of replacement of LED components for maintenance.
    Replacement LED module
    Replacement LED module for fixtures with interchangeable sources.
    Requisiti del cliente LED
    Needs and specifications of the client for the LED installation.
    Requisiti di illuminamento LED
    Lux levels required by the standard for each type of environment.
    Requisiti di progetto LED
    Technical and performance specifications of the LED installation to be achieved.
    Requisiti normativi LED
    Standards to be respected in the design and installation of the LED installation.
    Requisito illuminotecnico
    Specification of illuminance, uniformity, and UGR required by the standard for the LED.
    Resa cromatica
    See "CRI". Fidelity in color reproduction by an LED source.
    Resa cromatica alimentare
    Capability of the LED to enhance the appearance of meat, fish, fruit, and bread.
    Resa cromatica del rosso
    Capability of the LED to faithfully reproduce saturated red; sample R9.
    Resa cromatica del verde
    Capability of the LED to faithfully reproduce green; sample R11.
    Resa cromatica della pelle
    Capability of the LED to faithfully reproduce skin tones; samples R13-R15.
    Resa cromatica eccellente
    CRI above 90; for LED applications where color is critical.
    Resa cromatica minima normativa
    Minimum CRI required by the standard for the specific LED application.
    Resa cromatica per arte
    Capability of the LED to faithfully reproduce colors in works of art.
    Resa cromatica per moda
    Capability of the LED to faithfully reproduce colors of fabrics and clothing.
    Resa cromatica standard
    CRI between 80 and 89; sufficient for general LED lighting.
    Resa dei colori alimentari
    Capability of the LED to enhance the appearance of meat, fish, fruit, and bread.
    Resa dei colori degli alimenti
    Capability of LED light to enhance the appearance of meats, fish, and vegetables.
    Resa dei colori della pelle
    Capability of LED light to faithfully reproduce human skin tones.
    Resa dei colori tessili
    Capability of the LED to faithfully reproduce fabric colors in retail.
    Resa luminosa della strip
    Luminous flux emitted by the LED strip per meter; in lm/m.
    Resa luminosa per metro
    Luminous flux of the LED strip expressed in lumens per meter (lm/m).
    Resa luminosa strip LED
    Luminous flux of the LED strip expressed in lumens per meter.
    Reset button
    Reset button to restore the LED controller to factory settings.
    Residential controller
    LED controller designed for domestic use with a simplified interface.
    Residential dimmer
    Dimmer for residential use compatible with LED strips.
    Residential lighting
    LED lighting for private homes.
    Resina epossidica
    Material used for encapsulating LED chips and for IP sealing of strips and connectors.
    Resina poliuretanica
    Two-component resin for IP sealing of strips and connections.
    Resistance (ohmic)
    Electrical resistance of the conductors in the LED strip.
    Resistance measurement
    Measurement of the electrical resistance of the LED strip conductors.
    Resistance soldering
    Resistance soldering; for connections on LED strips.
    Resistenza (elettrica)
    SMD component on the LED strip limiting current to the correct value for each group of LEDs.
    Resistenza all'acqua LED
    Protection of the LED system from water penetration; IP ratings.
    Resistenza all'umidità LED
    Capability of LED components to function correctly in humid environments.
    Resistenza alla corrosione profilo
    Capability of the LED profile to resist environmental corrosion.
    Resistenza alla polvere LED
    Protection of the LED system from dust penetration.
    Resistenza del cavo LED
    Electrical resistance of the cable connecting driver and LED strip.
    Resistenza del diffusore
    Capability of the LED diffuser to withstand impacts, scratches, and UV.
    Resistenza del profilo LED
    Capability of the LED profile to withstand mechanical and thermal loads.
    Resistenza delle piste strip
    Electrical resistance of the copper tracks on the LED strip PCB.
    Resistenza di sense
    Low-value resistor for measuring LED current in the driver.
    Resistenza di shunt
    Parallel resistor for current diversion in the LED circuit.
    Resistenza meccanica profilo
    Capability of the LED profile to withstand loads without deforming.
    Resistenza pull-up
    Pull-up resistor towards the supply for bus signals in LED control.
    Resistenza SMD 0402
    Miniaturized 0402 resistor on the LED strip for current limitation.
    Resistenza SMD 0603
    0603 resistor on the LED strip; standard size.
    Resistenza SMD 0805
    0805 resistor on the LED strip; easy to solder manually.
    Resistenza termica (Rth)
    Measure of the difficulty with which heat flows from the LED chip to the environment; expressed in °C/W.
    Resistenza termica del profilo
    Capability of the LED profile to transfer heat from the strip to the environment.
    Resistor tolerance
    Tolerance of the SMD resistors on the LED strip; typically 1% or 5%.
    Reso LED
    Procedure for returning defective or non-conforming LED products.
    Resonant converter
    Converter topology in the LED driver for high efficiency and low noise.
    Retail application
    LEDs for retail stores; high color rendering and calibrated CCT.
    Retail display LED
    LED lighting for displays and showcases in retail.
    Rete di assistenza LED
    Network of technical support points for LED products.
    Rete di distribuzione LED
    Sales and distribution channels for LED products.
    Rete di vendita LED
    Distribution channels and sales points for LED products.
    Rete mesh LED
    Wireless mesh network for distributed LED control.
    Retention fin
    Internal profile tab that secures the LED strip in position.
    Retention force
    Force with which the diffuser is retained in the LED profile.
    Retrofit driver
    Power supply designed to replace the ballast in existing fixtures.
    Retrofit illuminazione domestica
    Replacement of traditional home lighting with LEDs.
    Retrofit illuminazione industriale
    Replacement of existing industrial lighting with LEDs.
    Retrofit illuminazione stradale
    Replacement of traditional street lighting with LEDs.
    Retrofit illuminazione ufficio
    Replacement of fluorescent office lighting with LEDs.
    Retrofit LED
    Replacement of a traditional lighting system with LEDs, reusing existing structures.
    Retroilluminazione
    Light from behind a translucent panel.
    Retroilluminazione bancone
    LED strip behind counters for a luminous effect on the wall.
    Retroilluminazione display
    LED strip behind displays and screens for bias lighting.
    Retroilluminazione mobile
    LED strip behind furniture for a floating effect and decorative lighting.
    Retroilluminazione pannello
    LED strip behind translucent panels for uniform backlighting.
    Retroilluminazione specchio
    LED strip behind the mirror for diffuse facial lighting.
    Retroilluminazione testiera
    LED strip behind the headboard of the bed for ambient effect.
    Retroilluminazione TV
    LED strip behind the TV for bias lighting and visual comfort.
    Return on investment (ROI)
    Return on investment of LED lighting compared to the previous system.
    Return period
    Payback period of the investment in LED lighting.
    Revenue grade meter
    Revenue-grade meter for precise measurement of LED consumption.
    Reverse current protection
    Protection against current flow in the opposite direction in the LED circuit.
    Reverse polarity protection
    Protection against reversed connection of + and - cables.
    Revit LED family
    Family of LED fixtures for Autodesk Revit BIM software.
    RF (radiofrequenza)
    Radio frequency wireless technology used for LED remote controls and controllers (315 MHz, 433 MHz, 2.4 GHz).
    Rf (TM-30 fidelity)
    TM-30 color fidelity index.
    RF dimmer
    Radio frequency dimmer for wireless LED control.
    RF interference
    Radio frequency interference that can disturb wireless LED controllers.
    Rg (TM-30 gamut)
    TM-30 saturation index.
    RGB (Red Green Blue)
    Additive color mixing system with red, green, and blue LEDs to obtain millions of shades.
    RGB algorithm
    Algorithm in the controller for calculating PWM values of RGB channels.
    RGB amplifier
    Specific amplifier for RGB strips that replicates the signal across three channels (R, G, B) to extend the system.
    RGB color model
    Additive color model based on red, green, and blue.
    RGB color wheel
    RGB color wheel for chromatic selection in the LED app.
    RGB controller app
    Smartphone application for controlling RGB LED strips.
    RGB decoder
    Decoder converting DMX signal into three PWM channels for RGB strips.
    RGB driver
    LED driver with three independent channels for driving RGB strips.
    RGB mixing
    Mixing of the three red, green, and blue channels to obtain any color.
    RGB mixing distance
    Distance required between RGB LEDs and diffuser for homogeneous mixing.
    RGB pixel
    Single addressable RGB LED in a strip; a pixel of colored light.
    RGB strip specification
    Technical specifications of an RGB LED strip: LED/m, W/m, lm/m, angle.
    RGBCCT
    LED strip with 5 channels: red, green, blue, warm white, and cool white; maximum chromatic versatility.
    RGBCCT amplifier
    Five-channel amplifier for RGBCCT strips over extended runs.
    RGBW
    LED strip with 4 channels: red, green, blue, and dedicated white; purer white than RGB mixing alone.
    RGBW amplifier
    Four-channel amplifier for RGBW strips, with an additional white channel compared to RGB.
    RGBW mixing
    Mixing of four channels for colors and pure white.
    RGBWW
    Variant with an additional warm white channel.
    Ribbon cable
    Flat multi-conductor cable for orderly LED wiring.
    Ricambio diffusore LED
    Replacement diffuser for the LED profile for maintenance.
    Ricambio end cap LED
    Replacement end cap for the LED profile.
    Ricambio per profilo LED
    Replacement component for the LED profile: diffuser, end cap, clip.
    Ricambio strip LED
    Replacement LED strip for upgrade or maintenance in the profile.
    Ricerca di mercato LED
    Study on trends and opportunities in the LED market.
    Ricerca e sviluppo LED
    Innovation activities in LED technology.
    Richiesta di preventivo LED
    Request for an offer for the supply of LED products.
    Ricombinazione radiativa
    Process in the semiconductor LED where an electron recombines with a hole emitting a photon.
    Riduttore di canale
    Insert adapting the channel of the LED profile to smaller width strips.
    Riduzione costi energetici
    Objective of LED lighting: reduce the energy bill by 50-80%.
    Riduzione dei consumi LED
    Decrease in the energy bill obtained with LED lighting.
    Riduzione dei costi LED
    Optimization of the LED installation to minimize total costs.
    Riduzione dell'impronta carbonica
    Contribution of LED lighting to the reduction of CO2 emissions.
    Riduzione inquinamento luminoso
    Contribution of full-cutoff LED fixtures to the protection of the night sky.
    Riflessione
    Optical phenomenon where LED light bounces off a surface; basis of indirect lighting.
    Riflessione del diffusore
    Percentage of LED light reflected back by the diffuser; to be minimized.
    Riflessione interna totale
    Optical phenomenon used in TIR lenses to control the LED beam.
    Riflettore
    Specular or semi-specular surface redirecting the LED light beam in the desired direction.
    Rifrazione
    Change of direction of LED light when passing between two different materials.
    Rigenerazione del profilo
    Restoration of the LED profile by replacing the strip and cleaning the diffuser.
    Righello metallico
    Steel ruler for precise measurements in cutting LED strips and profiles.
    Rigid aluminum bar
    Rigid LED bar on an aluminum substrate for maximum dissipation.
    Rigid bar
    LED bar on a rigid substrate for fixed applications.
    Rigidità del profilo LED
    Resistance of the profile to bending; depends on the section and material.
    Rigidità dielettrica
    Maximum voltage withstandable by the insulation without discharge; safety parameter for LED power supplies.
    Rilevamento guasti LED
    Identification of malfunctions in the LED installation for maintenance.
    Rilevatore di fumo LED
    LED indicator integrated in the smoke detector for signaling.
    Rilevatore di gas LED
    LED indicator in gas detectors for industrial environments.
    Rilevatore di movimento ceiling
    Ceiling-mounted motion sensor for automatic LED activation.
    Rilevatore di movimento wall
    Wall-mounted motion sensor for LED activation.
    Rilevatore di presenza ceiling
    Ceiling-mounted presence sensor with 360-degree detection for LEDs.
    Rilevatore di presenza wall
    Wall-mounted presence sensor for LED control.
    Rilievo fotometrico
    Field measurement of the illuminance produced by the LED installation.
    Ring connector
    Ring connector for screw connection.
    Ring light LED
    Annular LED light for lighting mirrors, photography, and video.
    Ripple (ondulazione residua)
    Residual variation of the DC voltage on the power supply output; high ripple causes flicker in LEDs.
    Ripple di corrente
    Ripple of the output current of the LED driver.
    Ripple di tensione
    Ripple of the output voltage of the LED driver.
    Rise time
    Rise time of the PWM pulse; influences high-frequency flicker.
    Risk assessment
    Risk assessment of the LED installation according to safety standards.
    Risparmio annuo LED
    Amount saved annually on the energy bill thanks to LEDs.
    Risparmio bolletta LED
    Reduction of electricity costs thanks to LED lighting.
    Risparmio energetico LED
    Reduction of consumption obtained by replacing traditional lighting with LEDs.
    Risposta spettrale dell'occhio
    V(lambda) sensitivity curve of the eye; LED lumens are weighted on this curve.
    Ristorante LED
    LED lighting for restaurants; atmosphere and dimming.
    Risultato del calcolo LED
    Output of the lighting calculation software: lux, uniformity, UGR.
    Risultato del collaudo LED
    Outcome of the final verification of the LED installation: compliant or non-compliant.
    Ritardo di accensione (start-up delay)
    Time required for the power supply to reach stable output voltage after power-on.
    Ritorno dell'investimento LED
    Time required for LED savings to repay the investment.
    Rivendita prodotti LED
    Distribution and commercialization activity of LED products.
    Rivenditore autorizzato LED
    Sales point authorized by the manufacturer for LED products.
    RJ11 (connettore)
    Telephone connector used in some LED controllers for sensor inputs.
    RJ45 (connettore)
    Standard Ethernet connector used for Art-Net and sACN protocols in LED control over IP networks.
    Roadside LED
    LED lighting for roadsides and guardrails.
    Roadway LED lighting
    Street LED lighting for vehicular roadways.
    Roadway lighting
    LED lighting for roads and highways.
    Rocker switch
    Rocker switch for on/off control of LEDs.
    Rod suspension accessory
    Kit with rigid rods for suspending LED profiles.
    RoHS
    European directive on the restriction of hazardous substances in electronic components, including LEDs.
    Roll (rotolo)
    See Reel. Standard packaging of LED strips.
    Roller blind LED
    Roller blind with integrated LED strip for lighting and privacy.
    Roof lighting
    LED lighting for roofs and architectural coverings.
    Room cavity ratio
    Room cavity ratio for LED lighting calculation.
    Room index
    Proportion index of the room used in lighting calculation.
    Root cause analysis
    Analysis of the root causes of a fault in the LED system.
    Rope clip
    Clip for suspension cable of pendant LED profiles.
    Rope light LED
    Flexible LED light tube for decoration.
    Rosone per sospensione
    Decorative ceiling element covering the anchor point of the LED profile.
    Rotatable connector
    Rotatable connector for variable angles between LED strip segments.
    Rotation mount
    Rotating support for orienting LED fixtures.
    Rotella
    See "Reel". Spool on which the LED strip is wound for packaging and distribution.
    Rotolo di strip LED
    Reel of wound LED strip; standard format 5 or 10 meters.
    Rough-in bracket
    Pre-installation bracket installed before finishing for mounting the LED profile.
    Round profile
    LED profile with a circular section for pendant applications.
    Round terminal accessory
    Rounded end cap for round LED profiles.
    Router (wireless)
    Network device for connecting Wi-Fi LED controllers.
    RPM (Remote Phosphor Module)
    Module with interchangeable remote phosphor to vary the color temperature of an LED fixture.
    RS-232
    Serial communication standard for interfacing with LED controllers from a PC.
    RS-485
    Serial communication standard used as the physical basis for the DMX512 protocol.
    Rubber gasket
    Rubber gasket for IP sealing of LED profiles and fixtures.
    Rubber mount
    Rubber anti-vibration support for LED fixtures in industrial environments.
    Ruggedized LED
    Reinforced LED fixture for extreme industrial environments.
    Rumore (noise)
    Electrical disturbance that can cause flicker or malfunctions.
    Run-in test
    Initial operating test to verify the stability of the LED system.
    Running meter
    Linear meter; unit of measurement for ordering LED strips and profiles.
    Rust-proof
    Rust-resistant; LED profiles in aluminum or stainless steel. ↑ Back to top

    S

    S-bend connector
    S-shaped connector for LED strips that must overcome a level difference.
    S-type profile
    LED profile with an S-section for installations on curved surfaces.
    sACN (Streaming ACN)
    DMX data streaming protocol over Ethernet (ANSI E1.31); alternative to Art-Net for LED installations.
    Sacrificial anode
    Sacrificial anode for cathodic protection of LED profiles in marine environments.
    Saddle bracket
    Saddle bracket for fixing LED profiles on pipes and cylindrical poles.
    Safety barrier
    Low-energy safety barrier for LED fixtures in ATEX zones.
    Safety chain
    Safety chain for suspended LED profiles as anti-fall protection.
    Safety class
    See Insulation class. Electrical safety classification.
    Safety disconnect
    Quick disconnection device for the LED circuit.
    Safety earth
    Safety earth connection for Class I LED fixtures.
    Safety extra-low voltage
    See SELV. Voltage that does not pose a risk of electrocution.
    Safety factor
    Safety margin in sizing the LED installation (typically 20-30%).
    Safety glass
    Safety glass for LED diffusers in public environments.
    Safety ground conductor
    Yellow-green protective conductor in the LED installation.
    Safety interlock
    Device interrupting LED power when the enclosure is opened.
    Safety label
    Safety label with warnings on the LED fixture.
    Safety margin
    Margin between operating conditions and the maximum limits of the LED system.
    Safety relay
    Certified safety relay for controlling critical LED circuits.
    Safety standard
    Safety standard applicable to LED products.
    Safety switch
    Safety switch for isolating the LED installation.
    Safety transformer
    Safety transformer with reinforced insulation for LED power supply.
    Sala conferenze LED
    LED lighting for conference rooms; multiple scenes.
    Sala espositiva LED
    LED lighting for exhibition halls; high CRI and uniformity.
    Sala operatoria LED
    LED lighting for operating rooms; very high CRI and medical specifications.
    Sala riunioni LED
    LED lighting for meeting rooms; dimmable and scenes.
    Saldatore a punta fine
    Soldering iron with a fine tip for precision connections on LED strips.
    Saldatore a stazione
    Soldering station with temperature control for LED strips.
    Saldatura (soldering)
    Process of electrical joining via molten metal alloy; used to connect cables and connectors to LED strips.
    Saldatura a onda
    Industrial process for PCBs; used in mass production of LED strips.
    Saldatura a riflusso (reflow)
    SMD soldering with paste and oven; standard for LED strips.
    Saldatura sulla strip LED
    Connection of cables to the LED strip via molten solder on the pads.
    Salt fog test
    Salt spray test to verify the corrosion resistance of LED profiles.
    Salt spray resistance
    Resistance to salt spray corrosion; critical for LEDs in coastal environments.
    Sample (campione)
    Sample of LED product for evaluation before ordering.
    Sample order
    Order of LED samples for evaluation before mass production.
    Samsung (LED)
    See "LED Samsung". Semiconductor division producing high-efficiency LED chips.
    Samsung LM281B
    Samsung LM281B high-efficiency LED chip for LED strips.
    Samsung LM301B
    Samsung LM301B LED chip for very high-efficiency LED strips.
    Samsung LM301H
    Samsung LM301H LED chip for LED grow lights.
    Sand blasting
    Sandblasting for a matte surface finish on aluminum LED profiles.
    Saturated color LED
    Monochromatic LED with high saturation of the emitted color.
    Saturation control
    Adjustment of color saturation in the RGB LED controller.
    Saturazione (del colore)
    Intensity and purity of a color; a monochromatic LED has high saturation, white has low saturation.
    Saturazione cromatica
    Purity of the color emitted by the LED; high for monochromatic, variable for white.
    Saturazione del colore LED
    Purity and intensity of the color emitted by the RGB LED strip.
    Sauna application
    LED lighting resistant to high temperatures and humidity for saunas.
    Sauna LED
    LED lighting resistant to heat and humidity for saunas.
    Saw cut
    Saw cut of the aluminum LED profile to the desired length.
    Scala telescopica
    Extendable ladder for installing LED profiles at height.
    Scale model
    Scale model of an LED installation for evaluating the lighting effect.
    Scan controller
    Controller driving LED matrices sequentially row by row.
    Scan rate
    Scan speed of channels in a DMX controller.
    Scanalatura per profilo LED
    Recessed slot in the surface for inserting the recessed profile.
    Scelta dei componenti LED
    Selection of strips, profiles, drivers, and accessories for the LED project.
    Scelta del CRI per l'applicazione
    Selection of the color rendering index suitable for the use.
    Scelta del diffusore
    Selection of the cover type (opal, frosted, transparent) for the LED profile.
    Scelta del grado IP LED
    Selection of the environmental protection rating suitable for the environment.
    Scelta del profilo LED
    Process of selecting the profile based on dimensions, finish, and application.
    Scelta del profilo per strip
    Selection of the profile compatible with the LED strip by size.
    Scelta dell'alimentatore LED
    Process of selecting the suitable LED driver for the installation.
    Scelta dell'alimentatore per strip
    Process of selecting the driver suitable for the LED strip.
    Scelta della CCT per l'ambiente
    Selection of the color temperature suitable for the type of environment.
    Scelta della potenza strip LED
    Selection of the power per meter of the strip based on the application.
    Scelta della soluzione LED
    Decision on the most suitable LED system type for the application.
    Scelta della strip LED
    Process of selecting the LED strip suitable for the application.
    Scena buonanotte LED
    Scenario gradually turning off all LEDs in the house.
    Scena buongiorno LED
    Scenario gradually turning on LEDs simulating dawn.
    Scena cena LED
    Scenario with warm and low light for dinner.
    Scena cooking LED
    Scenario with high neutral light for the kitchen.
    Scena energia LED
    Scenario with cool and intense light for productive activities.
    Scena luminosa
    Predefined combination of intensity, color, and temperature stored in a controller for instant recall.
    Scena romantica LED
    Scenario with warm light at low intensity and colors.
    Scena studio LED
    Scenario with neutral light and task lighting for study.
    Scena TV LED
    Scenario with bias lighting behind the screen and reduced ambient light.
    Scenario accoglienza LED
    Warm and soft lighting scene for the arrival of guests.
    Scenario lavoro LED
    Scene with neutral light at high intensity for productive activities.
    Scenario presentazione LED
    Scene with balanced lighting for meetings and presentations.
    Scenario relax LED
    Scene with warm light at low intensity for relaxation.
    Scene activation
    Activation of a lighting scene via command or sensor.
    Scene blending
    Gradual transition between two different lighting scenes.
    Scene button
    Dedicated button for recalling a preset lighting scene.
    Scene controller wall mount
    Wall-mounted controller with buttons for direct selection of scenes.
    Scene fade
    Fade between two lighting scenes with programmable time.
    Scene memory
    Memory of the LED controller for storing lighting scenes.
    Scene number
    Identification number of a stored lighting scene.
    Scene programming
    Programming of lighting scenes stored in the LED controller.
    Scene recall
    Recall of a lighting scene from the controller's memory.
    Scene selector
    Physical or digital selector for choosing the lighting scene.
    Scene sequence
    Automatic sequence of lighting scenes with programmed times.
    Scene store
    Storage of a lighting scene in the controller's memory.
    Scene timeout
    Time after which the current scene returns to the default value.
    Scene trigger
    Event automatically activating a lighting scene.
    Scheda di sicurezza LED
    Document with safety information of the LED product.
    Scheda prodotto profilo LED
    Summary document with the dimensions of the LED profile.
    Scheda prodotto strip LED
    Summary document with the main parameters of the LED strip.
    Scheda tecnica LED
    Document with all technical specifications of the LED product.
    Scheduling
    Time programming of LED lighting for times and days.
    Schema di cablaggio LED
    Drawing of the electrical connections of the LED installation.
    Schema di collegamento strip LED
    Drawing of the electrical connections of the LED strip to the driver.
    Schema di installazione LED
    Drawing with the mounting instructions of the LED system.
    Schema di principio LED
    Functional diagram of the LED installation with components and connections.
    Schema unifilare impianto LED
    Simplified electrical diagram of the LED installation with protections.
    Schema unifilare LED
    Simplified electrical diagram of the LED installation with circuits and protections.
    Schematic diagram
    Electrical diagram of the LED installation with symbols and connections.
    Schermatura EMI
    Protection against electromagnetic interference via metal cages or shielded sheaths.
    Scintillation
    Rapid variation of intensity and color; absent in quality LEDs.
    Sconce (applique)
    Wall-mounted LED fixture for decorative and ambient lighting.
    Sconti per professionisti LED
    Prices reserved for installers and designers for LED products.
    Scontistica LED
    Discount table applicable to LED products by quantity.
    Sconto quantità LED
    Unit price reduction for large quantity LED orders.
    Scotch tape test
    Adhesive tape test to verify the adhesion of the tape on the LED strip.
    Scotopic vision
    Vision in low light; rods more sensitive to blue-green.
    Scotopic/photopic ratio
    Ratio between night and day vision; influences the perception of LED light.
    Screen printing
    Screen printing for printing circuits and markings on LED strips.
    Screw base LED
    LED lamp with an Edison screw base; for retrofit.
    Screw cap connector
    Connector with a screw-on cap for LED cable joints.
    Screw clamp terminal
    Screw terminal for connecting cables to the LED power supply.
    Screw fixing
    Fixing with screws of the LED profile to the surface.
    Screw mount
    Mounting via screws of LED fixtures and profiles.
    Screw terminal
    Screw terminal for connecting cables to the LED power supply.
    Scuola LED
    LED lighting for schools; low UGR and energy savings.
    SDCM (Standard Deviation of Color Matching)
    Statistical measure of chromatic variability; 1-3 SDCM = excellent uniformity. Equivalent to MacAdam step.
    SDCM 1-step
    Chromatic variation within 1 MacAdam ellipse; imperceptible.
    SDCM 2-step
    Chromatic variation within 2 MacAdam ellipses; barely perceptible.
    SDCM 3-step
    Chromatic variation within 3 MacAdam ellipses; professional standard.
    SDCM 5-step
    Chromatic variation within 5 MacAdam ellipses; commercial standard.
    Sealed beam
    LED fixture with optics and source sealed in a single unit.
    Sealed connector
    Sealed connector with gasket to maintain IP protection.
    Sealed driver
    Completely sealed LED power supply for IP67 protection.
    Sealed enclosure
    Sealed enclosure for LED components in aggressive environments.
    Sealed unit
    Completely sealed LED unit for environmental protection.
    Sealing (sigillatura)
    Process of applying silicone, resin, or sheath to provide IP protection to the LED strip.
    Sealing compound
    Sealing compound for IP protection of LED joints and connections.
    Sealing gasket
    Sealing gasket for the IP rating of LED profiles and fixtures.
    Sealing ring
    Annular gasket for IP sealing of LED connectors and cable glands.
    Sealing strip
    Adhesive sealing strip for closing LED profiles.
    Seamless connection
    Invisible joint between two adjacent LED profiles for a continuous line.
    Seamless light
    Continuous light without visible interruptions; objective of linear LED installations.
    Secondary circuit
    Low-voltage secondary circuit of the LED power supply.
    Secondary distribution
    Distribution of indirect lighting reflected from surfaces.
    Secondary optic efficiency
    Efficiency of the secondary optics in transferring useful LED flux.
    Secondary reflector
    Additional reflector redirecting LED light for asymmetric distribution.
    Section cut
    Cut of the LED strip at the designated point for the desired length.
    Secure online LED purchasing
    Quality and authenticity guarantee when purchasing LEDs via e-commerce.
    Security lighting
    LED lighting for perimeter security of buildings and outdoor areas.
    Sede del produttore LED
    Geographical location of the LED product manufacturer.
    Sede di incasso profilo
    Recessed cavity in the surface for housing the LED profile.
    Segaccio per alluminio
    Hand saw for cutting aluminum LED profiles.
    Seghetto alternativo
    Electric jigsaw for quick cutting of LED profiles.
    Segment addressable
    LED strip where groups of LEDs are addressable as segments.
    Segment controller
    Controller managing individual segments of addressable LED strips.
    Segment length
    Length of the minimum cuttable segment of the LED strip.
    Segmento di mercato LED
    Portion of the LED market served by the manufacturer: residential, commercial, industrial.
    Segmento di taglio
    Minimum unit of LED strip that can be separated at the cut point without damaging the circuit.
    Segnale analogico
    Continuous signal (0-10V, 1-10V) used for analog dimming of LED drivers.
    Segnale digitale
    Discrete signal (DMX, DALI, PWM) for precise and repeatable control of LED fixtures.
    Segnaletica luminosa LED
    Signs and illuminated signs with LEDs for orientation and safety.
    Selective soldering
    Selective soldering of specific components on the LED strip.
    Selezione dei migliori prodotti LED
    Choice of higher quality LED components for the project.
    Selezione del connettore strip
    Choice of the connector type suitable for the LED strip and application.
    Selezione del diffusore
    Choice between opal, frosted, and transparent based on the desired effect.
    Selezione del fornitore LED
    Choice of the LED manufacturer or distributor for the project.
    Self-adhesive
    Self-adhesive; LED strip with double-sided tape on the back.
    Self-ballasted LED
    LED lamp with integrated driver; for standard bases.
    Self-contained emergency
    Emergency LED fixture with integrated battery and circuit.
    Self-dimming
    LED fixture automatically adjusting brightness based on ambient light.
    Self-healing fuse
    Auto-resetting fuse for LED strip protection.
    Self-monitoring driver
    LED driver with automatic diagnostics signaling anomalies.
    Self-regulating
    LED driver automatically compensating for voltage and temperature variations.
    Self-test (emergenza)
    Automatic periodic test of the emergency LED module.
    SELV (Safety Extra Low Voltage)
    Safety extra-low voltage (≤50V AC or ≤120V DC) without grounding; standard for LED installations.
    Semiconductor junction
    p-n junction of the semiconductor LED where light emission occurs.
    Semiconductor material
    Semiconductor material used in LED chips: GaN, InGaN, AlGaInP.
    Semiconduttore
    Material (GaN, InGaN, AlGaInP) underlying LED technology, emitting photons via electroluminescence.
    Semiconduttore composto
    Material such as GaN or InGaN used in LED chips; composed of multiple elements.
    Seminterrato LED
    LED lighting for basements and cellars.
    Sensibilità al contrasto
    Capability of the visual system to distinguish brightness differences; depends on the LED.
    Sensor bracket
    Bracket for mounting sensors on the LED profile.
    Sensor cable
    Cable dedicated to connecting sensors in the LED installation.
    Sensor coverage
    Area covered by the sensor for activating LED lighting.
    Sensor input
    Input of the LED controller for connecting sensors.
    Sensor integration
    Integration of sensors into the LED profile or fixture.
    Sensor mounting height
    Optimal mounting height of the sensor for LED lighting.
    Sensor override
    Possibility to manually disable the automatic control of LED sensors.
    Sensor response time
    Response time of the sensor for activating LED lighting.
    Sensor sensitivity
    Adjustable sensitivity of the sensor for optimizing LED control.
    Sensor timeout
    Delay time before LED shutdown after no detection.
    Sensor type
    Type of sensor: PIR, microwave, ultrasonic, photocell, capacitive.
    Sensor zone
    Coverage zone of the sensor for controlling LED lighting.
    Sensore crepuscolare
    Device detecting the natural light level and commanding automatic on/off of LEDs.
    Sensore crepuscolare per LED
    Sensor switching on LED lighting when natural light fades.
    Sensore di luce per LED
    Sensor adjusting LED intensity based on available natural light.
    Sensore di movimento (PIR)
    Passive infrared sensor activating LEDs when people are detected; for corridors, stairs, wardrobes.
    Sensore di movimento per LED
    PIR sensor activating LED lighting upon people passing.
    Sensore di presenza per LED
    Sensor keeping LEDs on as long as people are in the environment.
    Sensore di prossimità
    Device activating LEDs when the hand or body approaches; for under-cabinet and mirror lighting.
    Sensore di temperatura (NTC/PTC)
    Monitoring temperature for LED thermal protection.
    Sensore touch
    Capacitive switch activated by touch; integrated into LED profiles for on/off and dimming.
    Sensore TRVL
    Combined light, temperature, and presence sensor for HCL systems.
    Seoul SunLike LED
    Seoul SunLike chip with a spectrum similar to sunlight; CRI 97.
    Sequential activation
    Progressive switching on of LED strip segments one after another.
    Sequential control
    LED control with sequential activation of segments.
    Sequential dimming
    Progressive dimming of LED zones in sequence.
    Serial communication
    Serial communication for LED control: DMX, DALI, SPI, UART.
    Serial data
    Serial data transmitted to the addressable LED chip for color control.
    Serial protocol
    Serial communication protocol for LED control.
    Series circuit
    Series circuit; LEDs of the same strip section are in series.
    Series connection limit
    Maximum number of LEDs connectable in series before the voltage limit.
    Series resistor
    Series resistor limiting current to the LED chip in the strip.
    Series string
    String of LEDs connected in series inside the strip.
    Series-parallel circuit
    Mixed series-parallel architecture; the most common in LED strips.
    Serra rapida
    Quick clamp for temporary fixing of the LED profile during processing.
    Server room LED
    LED lighting for server rooms; high efficiency and low thermal load.
    Service access
    Access for maintenance of the LED power supply and profile.
    Service area
    Zone of an LED system accessible for maintenance.
    Service cable
    Service cable for temporary connection during LED maintenance.
    Service door
    Service door for access to LED components.
    Service life
    Total useful life of an LED system including maintenance.
    Service manual
    Maintenance and repair manual of the LED system.
    Servizio clienti LED
    Department dedicated to customer support for LED products.
    Servizio di configurazione LED
    Assistance for setting the parameters of the LED system.
    Servizio di consegna LED
    Transport of LED products from the warehouse to the site.
    Servizio di consulenza LED
    Technical support for the choice and design of the LED system.
    Servizio di montaggio LED
    Specialized labor for the installation of the LED installation.
    Servizio di personalizzazione LED
    Customization service for LED strips, profiles, and systems.
    Servizio di progettazione LED
    Professional consulting for the design of the LED installation.
    Servizio di progettazione su misura
    Customized LED lighting design for the client.
    Servizio di spedizione LED
    Logistics of delivery of LED products to the customer.
    Servizio di taglio a misura LED
    Custom cutting of LED strips and profiles to the required length.
    Servizio di taglio LED
    Custom cutting service of the LED strip according to customer needs.
    Set point
    Target value of a parameter (lux, CCT) in the LED control system.
    Set screw
    Grub screw for locking components on LED profiles.
    Seven-channel controller
    Seven-channel controller for advanced multi-color LED strips.
    Sezione cavi per LED
    Sizing of the cable cross-section based on current and distance.
    Sezione del cavo
    Area of the electrical conductor; must be calculated based on current and length to avoid voltage drops.
    Sezione del cavo LED
    Calculation of the cable cross-section based on current and length of the LED run.
    Sezione del diffusore
    Shape of the cross-section of the cover: flat, round, teardrop.
    Sezione del profilo LED
    Shape of the cross-section of the profile: U, V, rectangular, circular.
    Sfera integratrice
    Spherical instrument for measuring the total luminous flux of the LED.
    SFP (Stagnation Failure Point)
    Critical temperature at which the thermal degradation of LEDs accelerates irreversibly.
    Shade (paralume)
    Decorative shade modifying the distribution of LED light.
    Shading coefficient
    Shading coefficient; influences the calculation of daytime LED lighting.
    Shadow gap
    Linear shadow created by the joint between the LED profile and the surface.
    Shadow-free lighting
    LED lighting designed to minimize unwanted shadows.
    Shaft light
    LED light for light wells and vertical shafts.
    Shape factor
    Shape factor of the LED profile determining its dissipation properties.
    Shared bus
    Communication bus shared between multiple LED devices.
    Shatter-proof diffuser
    Unbreakable polycarbonate diffuser for high-risk environments.
    Shelf life
    Storage life of LED products before installation.
    Shelf lighting
    LED lighting integrated into shelves and racks for retail.
    Shelf talker LED
    Illuminated LED strip for highlighting products on retail shelves.
    Shell (involucro)
    Outer shell of the LED fixture.
    Shield (schermatura)
    EMI protection of LED control cables and circuits.
    Shielded cable impedance
    Impedance of the shielded cable for LED signals: 110 ohms for DMX.
    Shielded connector
    Connector with EMI shielding for sensitive LED signals.
    Shielded enclosure
    Enclosure with EMI shielding for LED drivers in disturbed environments.
    Shielding effectiveness
    Effectiveness of the EMI shielding of the LED fixture.
    Shift register
    Shift register in the addressable LED chip for data transfer.
    Shift register IC
    Shift register integrated circuit in the addressable LED chip.
    Shimmer effect
    Delicate brightness tremor on LEDs for decorative effect.
    Ship lighting
    LED lighting for ships; resistant to corrosion and vibrations.
    Shop fitting LED
    LED lighting for the setup of shops and stores.
    Short circuit indicator
    Indicator signaling a short circuit in the LED system.
    Short circuit protection
    See "Short circuit protection (SCP)". Safety circuit in the power supply.
    Short circuit rating
    Maximum short-circuit current tolerable by the LED circuit.
    Short throw
    Wide LED beam for close-range illumination.
    Short throw projector LED
    Short-throw LED projector for close-range illumination.
    Show room LED
    LED lighting for showrooms; high CRI and demonstration scenes.
    Showcase lighting
    LED lighting for display cases and showcases.
    Shower enclosure LED
    LED lighting for shower enclosures; IP65 rated and humidity resistant.
    Shower light LED
    IP65 LED fixture for shower illumination.
    Showroom LED
    Display environment where LED products can be seen in operation.
    Showroom application
    LED lighting for showrooms; high CRI and adjustable CCT.
    Shrink tube
    See Heat shrink tubing. Tube shrinking with heat.
    Shunt capacitor
    Parallel capacitor for filtering in the LED circuit.
    Shunt regulator
    Shunt voltage regulator used in some LED circuits.
    Shut-down mode
    Complete shutdown mode of the LED power supply for zero consumption.
    Shut-off angle
    Angle beyond which the LED source is no longer visible; anti-glare.
    Shutter (otturatore)
    Mechanical element blocking the LED beam; for theatrical effects.
    Sicurezza elettrica LED
    Compliance of the LED installation with electrical safety standards.
    Sicurezza fotobiologica LED
    Compliance of the LED product with standard EN 62471 on ocular safety.
    Side bracket
    Side bracket for mounting LED profiles on vertical surfaces.
    Side channel
    Side channel of the LED profile for cable routing.
    Side cover
    Side cover of the LED profile for protection and finishing.
    Side cutter
    Side cutter for precise cutting of LED strips.
    Side emitting neon flex
    Neon flex with side emission for writings and shapes on flat surfaces.
    Side-emitting
    See "Lateral emission". LED strip with chips emitting light perpendicular to the mounting surface.
    Side-mount connector
    Side-mounted connector on the LED strip for low-profile wiring.
    Side-mounted profile
    LED profile mounted laterally on a vertical surface.
    Sight line
    Line of sight of the observer; LED lighting must avoid glare along this line.
    Signal amplifier
    See Signal amplifier. Regenerates the signal for long runs.
    Signal booster
    Amplifier of the LED control signal for long distances.
    Signal cable
    Cable dedicated to carrying LED control signals (DMX, DALI).
    Signal converter
    Converter between different LED signal formats (e.g., DALI to PWM, 0-10V to DMX).
    Signal delay
    Delay in the transmission of the LED control signal.
    Signal distribution
    Distribution of the LED control signal to multiple devices.
    Signal generator
    Signal generator for testing and calibration of LED systems.
    Signal ground
    Ground of the control signal; reference for DMX and 0-10V.
    Signal input
    Input of the LED controller or driver for control signals.
    Signal integrity
    Quality of the LED control signal; degraded by interference and distance.
    Signal isolator
    Galvanic isolator for LED control signals.
    Signal level
    Level of the LED control signal; 0-10V, 0-24V, digital.
    Signal output
    Output of the LED controller for the command signal to drivers.
    Signal path
    Path of the control signal from the controller to the LED driver.
    Signal quality
    Quality of the LED control signal; influenced by interference and distance.
    Signal relay
    Relay for switching low-power LED control signals.
    Signal repeater
    Repeater of the LED control signal for long runs.
    Signal splitter
    Splitter of the LED control signal to multiple outputs.
    Signal strength
    Strength of the wireless signal for remote LED control.
    Signal termination
    Termination of the DMX signal with a 120 ohm resistor on the last device.
    Signal type
    Type of LED control signal: PWM, 0-10V, DALI, DMX, SPI.
    Signal wiring
    Wiring dedicated to LED control signals.
    Signal-to-noise ratio (SNR)
    Signal-to-noise ratio in LED control circuits.
    Silicone
    Flexible and heat-resistant polymer material used for IP sheaths, neon flex, and LED encapsulation.
    Silicone adhesive
    Heat-resistant silicone-based adhesive for LED strips.
    Silicone alimentare
    Silicone approved for food contact; for LED strips in commercial kitchens.
    Silicone cable
    Cable with silicone insulation for high temperatures near LEDs.
    Silicone coating
    Silicone coating for IP protection of LED strips.
    Silicone conformal coating
    Conformal silicone coating for IP protection of LED strips.
    Silicone diffuser
    Flexible silicone diffuser for LED neon flex.
    Silicone dome
    Transparent silicone dome over the LED chip for protection and optics.
    Silicone encapsulation
    Silicone encapsulation of the LED strip for IP67/IP68 protection.
    Silicone extrusion
    Silicone extrusion for the production of LED neon flex.
    Silicone gel
    Silicone gel for soft encapsulation of IP65 LED strips.
    Silicone glue
    Silicone glue for fixing and sealing LED components.
    Silicone HTV
    Heat-vulcanizable silicone for sheaths and LED neon flex.
    Silicone jacketed cable
    Cable with silicone sheath for high-temperature environments.
    Silicone lens
    Optical silicone lens for high-power LED chips.
    Silicone LSR
    Liquid silicone for high-precision LED lenses.
    Silicone molding
    Silicone molding for the production of flexible LED components.
    Silicone oil
    Silicone oil for thermal transfer in immersion LED systems.
    Silicone ottico
    High-transparency silicone used as an encapsulant for LED chips and in secondary lenses.
    Silicone pad
    Silicone pad for cushioning LED components.
    Silicone potting
    Silicone filling for complete protection of LED strips and connections.
    Silicone RTV
    Room-temperature-vulcanizing silicone for LED seals.
    Silicone rubber
    Silicone rubber for IP gaskets and flexible LED components.
    Silicone sealant
    Silicone sealant for IP sealing of LED joints and end caps.
    Silicone sheet
    Transparent silicone sheet for surface protection of LED strips.
    Silicone sleeving
    Silicone sleeve enclosing the LED strip for IP67 protection.
    Silicone spray
    Silicone spray to facilitate insertion of the strip into the LED profile.
    Silicone strip cover
    Silicone cover applied over the LED strip for protection.
    Silicone trasparente
    Transparent silicone sealant for IP protection of LED joints.
    Silicone tube
    Silicone tube enclosing the LED strip for protection and diffusion.
    Silicone washer
    Silicone washer for cushioned fixing of LED components.
    Silver plated contact
    Silver-plated contact for high-conductivity LED connectors.
    Silver reflector
    Silver deposited reflector for maximum optical efficiency in LEDs.
    Simulation result
    Result of the lighting calculation showing illuminance and LED uniformity.
    Simulation software
    Software for simulating LED light distribution.
    Simulazione 3D LED
    Three-dimensional simulation of LED light distribution in the environment.
    Simulazione illuminotecnica
    Computerized calculation (DIALux, Relux) of light distribution in an environment to optimize the LED project.
    Sinagoga LED
    LED lighting for synagogues; respect for architecture.
    Sincronizzazione LED multi-room
    Synchronization of LED lighting across different rooms.
    Single board computer
    Single-board computer (Raspberry Pi) for controlling LED strips.
    Single channel driver
    Power supply with a single output for monochromatic strips.
    Single chip LED
    LED composed of a single die in the package.
    Single color strip
    Monochromatic LED strip; one fixed color or temperature.
    Single ended driver
    LED driver with output on one side; standard for most applications.
    Single layer PCB
    Single-layer conductive PCB; for simple LED strips.
    Single point failure
    Single fault causing complete loss of lighting; to be avoided with redundancy.
    Single-channel amplifier
    Single-channel amplifier for monochromatic strips over long runs.
    Sintered optic
    Optics in sintered material for diffusion and thermal resistance.
    Sistema completo LED
    Set of strip, profile, diffuser, end caps, clips, driver, and controller.
    Sistema di fissaggio profilo
    Method of anchoring the LED profile to the surface: clips, screws, glue.
    Sistema di illuminazione LED
    Complete set of strips, profiles, drivers, controllers, and LED accessories.
    Sistema di montaggio profilo
    Method of fixing the LED profile: clips, glue, magnetic, spring.
    Sistema di sospensione LED
    Kit for hanging LED profiles from the ceiling with cables and tensioners.
    Sistema LED integrato
    LED installation with all coordinated and compatible components.
    Site lighting
    Temporary or permanent LED lighting of an industrial or commercial site.
    Site survey
    Technical site survey for the design of the LED installation.
    Sito e-commerce LED
    Online sales platform for LED products.
    Sito web del produttore LED
    Manufacturer's online platform with catalog and LED information.
    Six-channel controller
    Six-channel controller for RGBCCT LED strips with an additional channel.
    Six-wire system
    Six-wire system for RGBCCT strips: one common and five channels.
    SK6812
    Individually addressable RGBW LED chip with digital protocol; evolution of the WS2812B with a white channel.
    SK9822
    Addressable LED chip compatible with APA102 with improved reliability.
    Skin effect
    Skin effect in high-frequency conductors; negligible in DC LED strips.
    Sky panel LED
    LED panel simulating the sky with clouds and light variations.
    Skylight (lucernario LED)
    LED panel simulating natural daylight; for windowless environments.
    Slab profile
    Flat and wide LED profile for lighting large surfaces.
    Slat light
    LED light integrated into wooden or metal slats.
    Slave amplifier
    Amplifier replicating the signal of the master controller on additional LED strips.
    Slave controller
    Secondary controller synchronized by the master for extended LED strips.
    Slave unit
    Secondary unit in a master-slave LED system.
    Sleeve (manicotto)
    Protective sleeve slipped over the joint of two LED strips.
    Slew rate
    Rate of change of current in the LED driver; influences dynamic response.
    Slide dimmer
    Dimmer with a sliding cursor for linear adjustment of LED brightness.
    Slide rail
    Sliding guide for inserting and extracting the LED profile.
    Slide-in (diffusore)
    Side insertion system of the diffuser into the groove of the LED profile.
    Sliding contact
    Sliding electrical contact for length-adjustable LED profiles.
    Slim driver
    Ultra-thin LED power supply for limited spaces.
    Slit aperture
    Slit aperture in the LED profile for a narrow and defined light beam.
    Slope ceiling mount
    Mounting of LED profiles on sloped ceilings with angle adapters.
    Slot cutter
    Router bit for creating the seat of the LED profile in drywall or wood.
    Slot dimension
    Dimension of the slot in the ceiling or wall for the recessed LED profile.
    Slot profile
    Narrow-slot LED profile for a minimal light line.
    Slot width
    Width of the LED profile slot; determines the visible light line.
    Slotted fixing hole
    Elongated hole in a profile for screw passage with positional adjustment.
    Slow blow fuse
    Time-delay fuse tolerating short overcurrents; for inrush current.
    Slow fade
    Slow fade of LED brightness for very gradual transitions.
    Smart building
    Intelligent building with LED lighting integrated into automatic management.
    Smart building LED
    Smart building with LED lighting integrated into the building automation system.
    Smart button
    Programmable wireless button for controlling LED scenes.
    Smart button LED
    Wireless button for quick recall of LED scenes.
    Smart city lighting
    Connected urban LED lighting for efficiency and smart services.
    Smart connector
    LED connector with an integrated chip for automatic identification and configuration.
    Smart dimmer
    Dimmer with wireless connectivity for integration into smart home systems.
    Smart driver
    LED driver with advanced features: reporting, diagnostics, programmability.
    Smart grid
    Intelligent power grid in which LED lighting participates in energy management.
    Smart home
    Home equipped with a home automation system for intelligent control of LED lighting and other systems.
    Smart light switch
    Intelligent switch with wireless connectivity for LED control.
    Smart lighting
    Connected LED lighting remotely controllable via app, voice assistants, or automations.
    Smart meter
    Smart meter monitoring the consumption of the LED installation in real time.
    Smart plug LED
    Smart plug for on/off control and monitoring of LED fixtures.
    Smart plug per LED
    Smart plug for on/off control of traditional LED fixtures.
    Smart sensor
    Intelligent sensor with integrated logic for automatic LED control.
    Smart strip
    LED strip with a wireless controller directly integrated into the PCB.
    Smart switch
    Intelligent switch with Wi-Fi or Zigbee for LED control.
    SmartThings app
    Samsung application for controlling smart LED devices.
    SMD (Surface Mount Device)
    Surface mount device technology; standard for modern LED strips.
    SMD 0807
    Miniaturized LED package (0.8×0.7 mm) for very high-density strips and micro-applications.
    SMD 1206
    SMD LED package with dimensions 1206; for professional LED strips and modules.
    SMD 1808
    SMD LED package with dimensions 1808; for professional LED strips and modules.
    SMD 2010
    SMD LED package with dimensions 2010; for professional LED strips and modules.
    SMD 2016
    Compact package (2.0×1.6 mm) for high-density strips with reduced pitch.
    SMD 2110
    Ultra-compact 2.1×1.0 mm package for COB-like strips.
    SMD 2216
    LED package (2.2×1.6 mm) used in high-density strips for dot-free uniform lighting.
    SMD 2520
    SMD LED package with dimensions 2520; for professional LED strips and modules.
    SMD 2727
    SMD LED package with dimensions 2727; for professional LED strips and modules.
    SMD 2835
    LED package (2.8×3.5 mm) the most widespread in professional LED strips; high efficiency and versatility.
    SMD 3014
    LED package (3.0×1.4 mm) compact for medium-high density strips.
    SMD 3030
    SMD LED package with dimensions 3030; for professional LED strips and modules.
    SMD 3030-HV
    SMD LED package with dimensions 3030-HV; for professional LED strips and modules.
    SMD 335
    Side-emitting LED package (3.3×3.5 mm) with lateral emission; for edge lighting and slim profiles.
    SMD 3528
    LED package (3.5×2.8 mm) of previous generation to the 2835; still used in economical strips.
    SMD 3535
    LED package (3.5×3.5 mm) square for medium-power strips and linear modules.
    SMD 3535-HV
    SMD LED package with dimensions 3535-HV; for professional LED strips and modules.
    SMD 3838
    LED package (3.8×3.8 mm) for high-power strips with good thermal dissipation.
    SMD 4014
    4.0×1.4 mm package for high-density and high-power strips.
    SMD 4040
    LED package (4.0×4.0 mm) high power for LED strips with high luminous output.
    SMD 5050
    LED package (5.0×5.0 mm) with three internal dies; used in RGB strips and early generations.
    SMD 5054
    SMD LED package with dimensions 5054; for professional LED strips and modules.
    SMD 5630
    LED package (5.6×3.0 mm) high power for LED strips with high luminous flux.
    SMD 5730
    5.7×3.0 mm package similar to the 5630; widespread in rigid bars.
    SMD 7020
    SMD LED package with dimensions 7020; for professional LED strips and modules.
    SMD 7030
    SMD LED package with dimensions 7030; for professional LED strips and modules.
    SMD 7070
    SMD LED package with dimensions 7070; for professional LED strips and modules.
    SMD component
    Surface-mount electronic component present on the LED strip.
    SMD LED package
    Enclosure of the LED chip for surface mounting on the strip.
    SMD resistor
    Surface-mount resistor on the LED strip for current limitation.
    SMD soldering
    Soldering of surface-mount components on the LED strip.
    Smoke detector LED
    Smoke detector with integrated status LED indicator.
    Smooth dimming curve
    Smooth dimming curve without perceptible jumps or steps.
    Snap bracket
    Snap-on bracket for quick fixing of LED profiles.
    Snap connector
    Snap connector for quick connection of LED strips.
    Snap-fit joint
    Snap-fit joint between LED profile components.
    Snap-in (clip)
    Snap-on attachment for diffusers and covers.
    Snoot
    Tubular accessory narrowing the LED beam for precise accent lighting.
    Snow load
    Snow load on outdoor LED fixtures; for support dimensioning.
    Snubber circuit
    RC circuit suppressing voltage transients in LED dimmers.
    Socket (presa)
    Socket for connectors; for interchangeable LED modules.
    Socket adapter
    Adapter for different LED lamp holders.
    Socket panel
    Panel with multiple sockets for connecting LED power supplies.
    Soddisfazione del cliente LED
    Level of customer satisfaction with the LED product and service.
    Sodium replacement
    Replacement of sodium lamps with LEDs for street lighting.
    Soffit lighting
    LED lighting integrated into the underside of a projection or cornice.
    Soffitto luminoso LED
    Ceiling fully illuminated with diffused LED strips or panels.
    Soft glow
    Soft and diffused light; achieved with opal diffusers and low CCT.
    Soft on/off
    Gradual on/off of LEDs for visual comfort.
    Soft start
    Gradual startup of the power supply with limited inrush current; protects LEDs and the circuit.
    Soft starter
    Device limiting the startup current of the LED power supply.
    Soft white (2700K)
    Standard color temperature for warm residential lighting.
    Softbox LED
    LED light with soft diffuser for photographic and video lighting.
    Software di controllo LED
    Application for managing LED lighting from a PC or smartphone.
    Software update
    Update of the software of the LED control system.
    Soglia di illuminamento LED
    Minimum lux level required by the standard for the LED application.
    Soil moisture sensor LED
    Soil moisture sensor for controlling garden LEDs.
    Solar charge controller
    Solar charge controller for off-grid LED systems.
    Solar LED
    LED system powered by photovoltaic panels; for autonomous lighting.
    Solar panel LED system
    Autonomous LED system with solar panel and battery.
    Solar powered LED
    LED fixture powered exclusively by solar energy.
    Solar radiation sensor
    Solar radiation sensor for controlling LED daylight harvesting.
    Solder bridge
    Accidental solder bridge between two adjacent pads on the LED strip.
    Solder flux
    Flux material facilitating the soldering of LED contacts.
    Solder joint
    Solder joint between the cable and the pad of the LED strip.
    Solder mask
    Green or white solder mask on the LED strip PCB.
    Solder pad
    See "Soldering pad". Copper area on the strip for connections.
    Solder pad spacing
    Distance between soldering pads on the LED strip.
    Solder paste
    Soldering paste applied on pads before reflow soldering.
    Solder point
    Soldering point on the LED strip for cable connections.
    Solder reflow profile
    Thermal profile of the soldering oven for LED strips.
    Solder tip
    Tip of the soldering iron for precision work on LED strips.
    Solder wick
    Desoldering braid for removing excess solder from the LED strip.
    Solder wire
    Solder wire for manual soldering on LED strips.
    Soldering iron
    Soldering iron for manual connections on LED strips.
    Soldering station
    Professional soldering station with temperature control.
    Solderless connector
    Solderless connector for LED strips; clip or press type.
    Solid copper wire
    Solid copper wire for LED power supply; stiffer than stranded.
    Solid state lighting (SSL)
    Solid-state lighting; technical term encompassing all LED technologies.
    Solid state relay (SSR)
    Solid-state relay for silent switching of LED circuits.
    Solo operation
    Autonomous operation of the LED controller without network connection.
    Soluzione chiavi in mano LED
    Complete service from analysis to delivery of the functioning LED installation.
    Soluzione economica LED
    LED product with a good quality-price ratio for limited budgets.
    Soluzione LED chiavi in mano
    Complete service: analysis, design, supply, installation, testing.
    Soluzione LED personalizzata
    LED system designed and configured for the specific needs of the client.
    Soluzione premium LED
    High-end LED product for prestigious projects.
    Soluzione standard LED
    Mid-range LED product for general applications.
    Soluzione tecnica LED
    Technical response to a lighting problem with LED technology.
    Sonda passacavi
    Flexible guide wire for threading LED cables into conduits and suspended ceilings.
    Sonic sensor
    Ultrasonic sensor for presence and distance detection for LEDs.
    Soppalco LED
    LED lighting for mezzanines and lofts.
    Sorgente luminosa LED
    Any component emitting light via LED technology.
    Sorgente puntiforme
    Single LED or concentrated in a point; as opposed to the linear source of LED strips.
    Sostenibilità dei prodotti LED
    Manufacturer's commitment to reducing the environmental impact of LEDs.
    Sostituzione del diffusore
    Operation of removing and installing a new diffuser in the profile.
    Sostituzione dell'alimentatore LED
    Operation of replacing a faulty LED power supply.
    Sostituzione della strip LED
    Operation of removing and installing a new strip in the LED profile.
    Sostituzione lampade con LED
    Process of converting traditional lighting to LED.
    Sotto mensola LED
    LED lighting mounted under shelves to enhance objects.
    Sotto pensile LED
    LED lighting mounted under kitchen cabinets for the work surface.
    Sottopasso LED
    LED lighting for pedestrian and vehicular underpasses.
    Sottopensile
    Under-cabinet lighting.
    Sound activated LED
    LED strip reacting to sound via an integrated microphone.
    Sound insulation
    Acoustic insulation of the LED profile; relevant in noise-sensitive environments.
    Source color temperature
    Color temperature of the LED source specified by the manufacturer.
    Source current limit
    Maximum current deliverable by the LED power source.
    Source efficacy
    Efficacy of the LED source alone before fixture losses.
    Source efficacy rating (SER)
    Rating of the efficacy of the LED source.
    Sovradimensionamento (alimentatore)
    Practice of choosing a power supply with 20-30% higher power than the LED load for reliability.
    Space heater effect
    Heat emitted by the LED into the environment; negligible for strips, significant for projectors.
    Space ratio
    Ratio between the spacing of LED fixtures and the installation height.
    Spacer
    Spacer between the LED strip and the profile for position adjustment.
    Spacing (LED)
    Distance between the centers of two consecutive LEDs on the strip.
    Spaghetti wiring
    Messy wiring; to be avoided with planning and conduits.
    Span (luce libera)
    Distance between the support points of a suspended LED profile.
    Spare parts kit
    Spare parts kit for the maintenance of the LED installation.
    Spare parts LED
    Spare parts available for the maintenance of the LED installation.
    Spark arrestor
    Anti-spark device for protection of LED circuits in ATEX zones.
    Spark gap
    Spark gap protecting LED circuits from sudden overvoltages.
    Spa application
    LED lighting for wellness centers; chromotherapy and waterproof designs.
    Spec sheet
    Technical specification sheet of the LED product.
    Special effects lighting
    LED lighting for special effects: flash, strobe, chase, rainbow.
    Specifica del profilo LED
    Document with all dimensions and characteristics of the profile.
    Specifica dell'alimentatore LED
    Document with the electrical parameters of the LED driver.
    Specifica della strip LED
    Document with all technical parameters of the LED strip for the project.
    Specifica di acquisto LED
    Document defining the requirements of the LED product to be purchased.
    Specifica di progetto LED
    Document with all technical requirements of the LED installation.
    Specifica tecnica LED
    Document with the technical requirements of the LED installation for the specification.
    Specification grade
    Professional-grade LED product conforming to rigorous technical specifications.
    Specifiche del profilo LED
    Technical parameters: dimensions, material, finish, weight, strip compatibility.
    Specifiche dell'impianto LED
    Document with the detailed technical requirements of the LED installation.
    Specifiche della strip LED
    Complete technical parameters: CCT, CRI, W/m, lm/m, LED/m, IP, width.
    Specifiche minime LED
    Minimum performance requirements that the LED product must meet.
    Specifiche tecniche prodotto LED
    Complete document with all parameters of the LED product.
    Spectral absorption
    Selective absorption of specific wavelengths by phosphor or LED diffuser materials.
    Spectral analysis
    Measurement of LED emission spectrum using a spectrometer.
    Spectral band
    Range of wavelengths emitted by an LED; in white LEDs, it is a broad continuous spectrum.
    Spectral data
    Complete spectral data of an LED source for colorimetric analysis.
    Spectral distribution
    Distribution of LED luminous energy by wavelength.
    Spectral efficiency
    Spectral efficiency of the LED; ratio of lumens to radiant power.
    Spectral match
    Spectral correspondence between the LED source and a reference illuminant.
    Spectral output
    Spectral distribution of the power emitted by the LED by wavelength.
    Spectral power distribution (SPD)
    Detailed graph of the power emitted at each wavelength.
    Spectral purity
    Spectral purity of the monochromatic LED; half-width of the peak.
    Spectral response
    Spectral response of a sensor or photodetector to LED light.
    Spectral tuning
    Adjustment of the LED spectrum via mixing chips of different wavelengths.
    Spectrum analyzer
    Spectrum analyzer for the characterization of LED light.
    Spectrum tuning
    Adjustment of the LED spectrum via mixing channels of different wavelengths.
    Spedizione assicurata LED
    Transport of LED products with insurance coverage.
    Spedizione gratuita LED
    Delivery of LED products without additional costs for the customer.
    Speed control
    Adjustment of the speed of dynamic effects on addressable LED strips.
    Spelafili automatico
    Automatic wire stripper for stripping LED cables to the correct length.
    Spessore del diffusore
    Thickness of the LED profile cover; influences transmittance.
    Spessore del PCB strip
    Thickness of the printed circuit board of the LED strip; typically 0.12-0.2 mm.
    Spessore del profilo LED
    Total height of the LED profile section; determining factor for recessing.
    Spessore della strip LED
    Height of the LED strip; typically 1-2 mm for standard strips.
    Spettro continuo
    Light emission covering without gaps all visible wavelengths; Full Spectrum LEDs approach this ideal.
    Spettro di emissione
    Graph showing the distribution of the light energy emitted by an LED at different wavelengths.
    Spettro elettromagnetico
    Full range of radiation; visible LED light occupies 380-780 nm.
    Spettrometro a fibra ottica
    Portable spectrometer with optical fiber for field measurements of LEDs.
    Spettroradiometro
    Laboratory instrument for measuring the complete emission spectrum of an LED source.
    SPI (Serial Peripheral Interface)
    Serial protocol for addressable strips (WS2812, SK6812, APA102).
    Spike protector
    Protection device against voltage spikes in the LED circuit.
    Spillage
    LED light escaping from the intended beam, illuminating unwanted areas.
    Spine mount
    Mounting on a central supporting structure for bilateral LED profiles.
    Spiral LED
    LED strip mounted in a spiral around a cylindrical structure.
    Splash-proof
    Protected against water splashes; equivalent to IP44 for LED fixtures.
    Splashback LED
    LED lighting of the wall between the work surface and wall cabinets in the kitchen.
    Splice connector
    Connector for splicing two cables without cutting the conductor.
    Split driver
    Configuration with the LED driver divided between a power section and a control section.
    Split mount
    Two-part mounting system: fixed base and removable LED profile.
    Spool (bobina)
    Spool on which the LED strip is wound for packaging.
    Spot (illuminazione)
    Light beam concentrated on a specific point; achieved with optics or lenses on LED sources.
    Spot weld
    Spot welding for fixing metal components on LED profiles.
    Spotlight LED
    LED spotlight with a concentrated beam for accent lighting.
    Spray coat
    Spray painting of LED profiles for custom finishes.
    Spring balance
    Spring mechanism for adjusting the height of suspended LED profiles.
    Spring clamp
    Spring clamp for quick connection of LED cables.
    Spring clip
    Spring clip for quick fixing of recessed LED profiles in suspended ceilings.
    Spring hinge
    Spring hinge for openable diffusers of LED profiles.
    Spring loaded contact
    Spring contact for reliable connection on LED strips.
    Spring mount
    Spring mounting for inserting recessed LED profiles into the suspended ceiling.
    Spring steel clip
    Spring steel clip for elastic fixing of LED profiles.
    Spring terminal
    Spring terminal for quick and tool-free connection of LED cables.
    Spring washer
    Spring washer to prevent loosening of LED fixing screws.
    Squadra da falegname
    Carpenter's square for verifying right angles during the installation of LED profiles.
    Square profile
    LED profile with a square section for geometric installations.
    sRGB
    Standard color space for monitors; used as a reference in the calibration of LED systems for backlighting.
    Stabilimento LED
    LED lighting for production plants; efficiency and sensors.
    Stabilità cromatica LED
    Constancy of the color of LED light over time and with temperature changes.
    Stabilità del flusso LED
    Constancy of LED brightness over time under operating conditions.
    Stabilized output
    Stabilized output of the LED power supply with precise regulation.
    Stack mounting
    Stacked mounting of multiple LED strips for doubled brightness.
    Stadio LED
    LED lighting for stadiums; high power and absence of flicker.
    Stadium lighting LED
    LED lighting for stadiums and sports facilities.
    Staffa
    Metal support for wall, ceiling, or other structure mounting of LED profiles and fixtures.
    Staffa a L per parete
    L-shaped bracket for wall mounting of the LED profile.
    Staffa a U per soffitto
    U-shaped bracket for ceiling mounting of the LED profile.
    Staffa di inclinazione
    Bracket allowing tilting of the LED profile relative to the surface.
    Staffa di sospensione
    Element for hanging LED profiles from cables or rods.
    Staffa per profilo LED
    Mounting accessory for securing the profile to the surface.
    Staffa regolabile in altezza
    Height-adjustable bracket for suspended LED profiles.
    Stagger mount
    Staggered mounting of side-by-side LED strips to eliminate dark spots.
    Staging area
    Preparation area where LED components are assembled before installation.
    Stagno senza piombo
    Lead-free solder alloy compliant with RoHS for LED strip production.
    Stainless hardware
    Stainless steel screws and hardware for LED installations in corrosive environments.
    Stainless steel profile
    LED profile in stainless steel for highly corrosive environments.
    Staircase lighting
    LED lighting for stairs; safety and aesthetics.
    Stampa 3D per LED
    Rapid prototyping of LED components with a 3D printer.
    Stand-by (consumo)
    Electrical power absorbed by the power supply or controller when the LED is off; ideally < 0.5W.
    Standalone controller
    LED controller operating autonomously without network connection.
    Standard color rendering
    Standard color rendering with CRI between 80 and 89.
    Standard density strip
    LED strip with 60 LED/m; standard density for general lighting.
    Standard dimming protocol
    Standardized dimming protocol: DALI, DMX, 0-10V.
    Standard illuminant
    CIE reference illuminant for evaluating LED color.
    Standard profile
    LED profile of standard dimensions and shape available in the catalog.
    Standard qualitativo LED
    Quality level guaranteed by the manufacturer for their LED products.
    Standby consumption
    Consumption of the LED power supply in standby mode; ideally below 0.5W.
    Standby mode
    Standby mode of the LED power supply with reduced consumption.
    Standby relay
    Relay completely disconnecting the LED power supply in standby for zero consumption.
    Stanza smart LED
    Environment with LED lighting fully integrated into the smart home system.
    Star connection
    Star connection; each LED strip connected directly to the power supply.
    Star network
    Star network topology for centralized LED control.
    Star wiring
    Star wiring; each LED strip connected directly to the power supply.
    Start-up current
    Current at startup of the LED power supply; see Inrush current.
    Start-up delay
    Delay between power supply startup and LED emission.
    Start-up time
    Time required for the LED power supply to reach stable voltage.
    Starter (LED tube)
    Replacement device for installing LED tubes in fluorescent fixtures.
    State machine
    State machine in the LED controller for managing sequences and effects.
    State-of-the-art
    State-of-the-art LED technology; maximum current efficiency and performance.
    Static color
    Fixed color set on an LED strip; without dynamic effects.
    Static electricity
    Static electricity; risk for LED chips during handling.
    Static pressure
    Static pressure inside sealed LED fixtures.
    Statistical analysis
    Statistical analysis of LED production data for quality control.
    Stato dell'impianto LED
    Current operating condition of the LED system: operational, under maintenance, fault.
    Stato dell'ordine LED
    Current status of the LED product order: in progress, shipped, delivered.
    Status LED
    LED indicator showing the operating status of a device.
    Steady state
    Steady-state condition where LED temperature and performance stabilize.
    Steady state temperature
    Temperature reached by the LED system after the initial transient.
    Steam room LED
    LED fixture resistant to steam for Turkish baths and hammams.
    Steel cable
    Steel cable for suspending LED profiles from the ceiling.
    Steel wire rope
    Steel wire rope for suspending heavy LED fixtures.
    Step change
    Step change in LED brightness; without gradual transition.
    Step dimming
    Dimming in discrete steps rather than continuous.
    Step down converter
    Step-down DC-DC converter; common topology in LED drivers.
    Step MacAdam
    See "MacAdam ellipse". Unit of measurement of chromatic consistency between LEDs; ≤3 steps = imperceptible.
    Step up converter
    Step-up DC-DC converter to power high-voltage LEDs.
    Sterilization LED
    UV-C LED for sterilization of surfaces, water, and air.
    Stiffener plate
    Reinforcement plate for long LED profiles to reduce bending.
    Stima dei consumi LED
    Forecast calculation of the energy consumption of the LED installation.
    Stima del risparmio LED
    Forecast calculation of the savings obtainable with LED lighting.
    Stoccaggio a temperatura controllata
    Storage of LED products in a temperature- and humidity-controlled environment.
    Stoccaggio LED
    Storage conditions of LED products before installation.
    Stochastic dimming
    Dimming with small random variations to simulate natural light.
    Stock item
    LED product available in stock for immediate delivery.
    Stop-start function
    Stop and restart function of the LED installation.
    Storage battery
    Storage battery for off-grid or emergency LED systems.
    Storage condition
    Storage conditions of LED strips before installation.
    Storage temperature
    Temperature range for the storage of LED products.
    Straight connector
    Straight connector for linear joints of LED strips.
    Straight profile
    Straight LED profile for standard linear installations.
    Strain relief
    Anti-strain device protecting the cable from pulling at the LED connection point.
    Stranded wire
    Stranded copper wire; more flexible than solid wire for LED cabling.
    Strap mount
    Mounting with a metal strap on pipes and structures for LED fixtures.
    Strategia di illuminazione LED
    Planned approach for the implementation of LED lighting.
    Strategic lighting
    LED lighting strategically designed to maximize effect with minimum consumption.
    Stray light
    LED light undesirably scattered outside the intended beam.
    Street furniture LED
    LED lighting integrated into street furniture: benches, shelters, bollards.
    Stress analysis
    Analysis of mechanical stresses on LED profiles for structural verification.
    Stress relief
    Reduction of mechanical stresses in LED connections and cables.
    Stress test
    Test under extreme conditions to verify the robustness of the LED system.
    Strip clamp
    Clamp for fixing the LED strip inside the profile during installation.
    Strip compatibility
    Dimensional compatibility between the LED strip and the aluminum profile.
    Strip connector type
    Type of connector for LED strips: clip, solder, pogo pin, hippo.
    Strip cutting tool
    Specific tool for precise cutting of LED strips at the designated point.
    Strip density
    Number of LEDs per meter on the strip; from 30 to 700+ LED/m.
    Strip direction
    Power and signal direction of the LED strip; to be respected during installation.
    Strip extension
    Extension of the LED strip via connector or cable.
    Strip feed
    Power supply of the LED strip: from one end, from the center, or from both sides.
    Strip gauge
    Width of the LED strip: 5, 8, 10, or 12 mm standard.
    Strip holder
    Support holding the LED strip in position during installation.
    Strip insertion
    Insertion of the LED strip into the seat of the aluminum profile.
    Strip joint
    Joint between two sections of LED strip.
    Strip layout
    Arrangement of the LED strip in the project; path, lengths, and feed points.
    Strip LED
    Flexible printed circuit (FPCB) with surface-mounted SMD LEDs, adhesive on the back; the basic component of linear lighting.
    Strip LED 120 LED/m
    LED strip with a density of 120 LED chips per meter.
    Strip LED 12V
    Strip powered at 12V DC; shorter cutting segments but more subject to voltage drop.
    Strip LED 12V specification
    Complete technical specifications of the LED strip powered at {v} DC.
    Strip LED 14.4 W/m
    LED strip with a consumption of 14.4 Watts per linear meter.
    Strip LED 180 LED/m
    LED strip with a density of 180 LED chips per meter.
    Strip LED 19.2 W/m
    LED strip with a consumption of 19.2 Watts per linear meter.
    Strip LED 2200K
    LED strip with a fixed color temperature of 2200K.
    Strip LED 230V
    Strip powered directly by the mains voltage with a rectifier; for very long outdoor linear installations.
    Strip LED 24 W/m
    LED strip with a consumption of 24 Watts per linear meter.
    Strip LED 240 LED/m
    LED strip with a density of 240 LED chips per meter.
    Strip LED 2400K
    LED strip with a fixed color temperature of 2400K.
    Strip LED 24V
    Strip powered at 24V DC; the best compromise between cuttability and maximum connectable length.
    Strip LED 24V specification
    Complete technical specifications of the LED strip powered at {v} DC.
    Strip LED 2700K
    LED strip with a fixed color temperature of 2700K.
    Strip LED 28.8 W/m
    LED strip with a consumption of 28.8 Watts per linear meter.
    Strip LED 30 LED/m
    LED strip with a density of 30 LED chips per meter.
    Strip LED 3000K
    LED strip with a fixed color temperature of 3000K.
    Strip LED 3500K
    LED strip with a fixed color temperature of 3500K.
    Strip LED 352 LED/m
    LED strip with a density of 352 LED chips per meter.
    Strip LED 36 W/m
    LED strip with a consumption of 36 Watts per linear meter.
    Strip LED 4.8 W/m
    LED strip with a consumption of 4.8 Watts per linear meter.
    Strip LED 4000K
    LED strip with a fixed color temperature of 4000K.
    Strip LED 4500K
    LED strip with a fixed color temperature of 4500K.
    Strip LED 48 W/m
    LED strip with a consumption of 48 Watts per linear meter.
    Strip LED 480 LED/m
    LED strip with a density of 480 LED chips per meter.
    Strip LED 48V
    Strip powered at 48V DC; allows very long runs with minimal voltage drop.
    Strip LED 48V specification
    Complete technical specifications of the LED strip powered at {v} DC.
    Strip LED 5000K
    LED strip with a fixed color temperature of 5000K.
    Strip LED 512 LED/m
    LED strip with a density of 512 LED chips per meter.
    Strip LED 5700K
    LED strip with a fixed color temperature of 5700K.
    Strip LED 5V
    5V DC strip; for addressable (WS2812B) and USB.
    Strip LED 5V specification
    Complete technical specifications of the LED strip powered at {v} DC.
    Strip LED 60 LED/m
    LED strip with a density of 60 LED chips per meter.
    Strip LED 6500K
    LED strip with a fixed color temperature of 6500K.
    Strip LED 700 LED/m
    LED strip with a density of 700 LED chips per meter.
    Strip LED 9.6 W/m
    LED strip with a consumption of 9.6 Watts per linear meter.
    Strip LED 90 LED/m
    LED strip with a density of 90 LED chips per meter.
    Strip LED a luce calda
    LED strip with warm CCT (2200-3500K) for residential environments.
    Strip LED a luce fredda
    LED strip with cool CCT (5500-6500K) for technical environments.
    Strip LED a luce neutra
    LED strip with neutral CCT (4000-4500K) for multifunctional environments.
    Strip LED ad alta efficienza
    LED strip with efficacy above 160 lm/W.
    Strip LED ad alta resa cromatica
    LED strip with CRI above 90 for color fidelity.
    Strip LED al metro
    Sale of LED strips priced per linear meter.
    Strip LED alta potenza
    LED strip with consumption above 19.2 W/m for primary lighting.
    Strip LED bassa potenza
    LED strip with consumption below 5 W/m for decorative lighting.
    Strip LED biadesiva
    Strip with adhesive tape already applied for direct mounting.
    Strip LED catalogo
    List of all available LED strips with specifications and prices.
    Strip LED COB
    Strip with LED chips mounted at minimum distance without visible points; produces a continuous and uniform line of light.
    Strip LED compatibile profilo
    LED strip with dimensions and characteristics suitable for the chosen profile.
    Strip LED con chip Bridgelux
    LED strip with high-efficiency Bridgelux LED chips.
    Strip LED con chip Cree
    LED strip with high-efficiency Cree LED chips.
    Strip LED con chip Lumileds
    LED strip with Luxeon chips from Lumileds for professional performance.
    Strip LED con chip Nichia
    LED strip with high-reliability Nichia LED chips.
    Strip LED con chip Osram
    LED strip with German-quality Osram LED chips.
    Strip LED con chip Samsung
    LED strip with high-efficiency Samsung LED chips.
    Strip LED con chip Seoul
    LED strip with Seoul Semiconductor SunLike chips for a natural spectrum.
    Strip LED con garanzia
    LED strip with manufacturer's warranty on performance and duration.
    Strip LED di qualità
    Professional LED strip with branded LED chips, tight binning, and copper PCB.
    Strip LED doppia fila
    LED strip with two parallel rows of chips for doubled flux.
    Strip LED economica
    Base-level LED strip for non-critical decorative applications.
    Strip LED flessibile
    LED strip on a flexible substrate that adapts to curved surfaces.
    Strip LED IP20
    Strip without protection; only for dry indoor use.
    Strip LED IP65
    Strip with silicone coating on the upper surface; protected from dust and water jets.
    Strip LED IP67
    Strip completely encapsulated in a silicone sheath; protected from dust and temporary immersion.
    Strip LED IP68
    Strip with hermetic encapsulation for permanent immersion; suitable for swimming pools and fountains.
    Strip LED made in Italy
    LED strip produced in Italy with local quality control.
    Strip LED media potenza
    LED strip with consumption between 9.6 and 14.4 W/m for general lighting.
    Strip LED per applicazioni professionali
    High-quality LED strip for professional installations.
    Strip LED per esterno
    LED strip with IP65 or higher protection for outdoor installation.
    Strip LED per illuminazione diretta
    Directly visible LED strip; requires COB or high density.
    Strip LED per illuminazione indiretta
    LED strip directed towards the ceiling or wall for diffused light.
    Strip LED per interno
    IP20 LED strip for installation in dry indoor environments.
    Strip LED per professionisti
    Professional quality LED strip for installers and lighting designers.
    Strip LED professionale
    High-end LED strip for professional and architectural installations.
    Strip LED RGBA
    Strip with red, green, blue, and amber LEDs for an extended gamut.
    Strip LED singola fila
    LED strip with a single row of chips; standard configuration.
    Strip LED su misura
    LED strip cut to the exact length required by the project.
    Strip LED tagliabile
    LED strip with predefined cutting points for customization.
    Strip LED ultra sottile
    LED strip with reduced PCB thickness for minimal installations.
    Strip length calculator
    Tool for calculating the required length of LED strip.
    Strip mounting
    Application of the LED strip to the surface via double-sided tape or profile.
    Strip output
    Luminous flux and power of the LED strip as a function of length.
    Strip pitch
    Distance between the centers of two consecutive LEDs on the strip.
    Strip power calculator
    Tool for calculating the total power of the LED strips in the installation.
    Strip removal
    Removal of the LED strip from the profile for replacement or maintenance.
    Strip replacement
    Replacement of the LED strip inside the profile without dismantling the system.
    Strip section
    Section of the LED strip between two consecutive cut points.
    Strip selection guide
    Guide to choosing the LED strip based on the application.
    Strip soldering pad
    Soldering pad on the LED strip for cable connections.
    Strip spacing
    Distance between two parallel LED strips for uniform lighting.
    Strip specification
    Complete technical specifications of the LED strip: power, flux, CRI, CCT, IP.
    Strip support
    Auxiliary support for the LED strip inside the profile.
    Strip tester
    Tool for functional testing of LED strips before installation.
    Strip type
    Type of LED strip: SMD, COB, addressable, RGB, CCT, RGBCCT.
    Strip voltage
    Operating voltage of the LED strip: 5V, 12V, 24V, 48V DC.
    Strip width tolerance
    Tolerance on the width of the LED strip; critical for profile compatibility.
    Strip-to-profile adapter
    Component that adapts strips of different widths to the profile channel.
    Striscia a luce continua
    COB or high-density LED strip producing a line without visible points.
    Striscia LED
    See "LED strip". Flexible linear circuit with surface-mounted SMD LEDs.
    Striscia luminosa a LED
    Synonym for LED strip; flexible circuit with LED chips.
    Striscia luminosa LED
    Synonym for LED strip; flexible circuit with LED chips.
    Strobe (effetto)
    Rapid flashing of LEDs for scenic or signaling effects.
    Stroboscopic effect
    Stroboscopic effect caused by LED flicker on moving objects.
    Structural bonding
    Structural bonding of the LED profile to the surface with high-strength adhesives.
    Stucco per cartongesso
    Joint compound for finishing the edge between the recessed LED profile and drywall.
    Studio dentistico LED
    LED lighting for dental practices; high CRI and task lighting.
    Studio di fattibilità LED
    Preliminary analysis of the technical and economic feasibility of the LED installation.
    Studio fotografico LED
    LED lighting for photography studios; CRI>95 and controlled CCT.
    Studio legale LED
    LED lighting for professional offices; comfort and productivity.
    Studio medico LED
    LED lighting for medical practices; high CRI and health standards.
    Studio televisivo LED
    LED lighting for TV studios; flicker-free and controlled CCT.
    Sub-guide
    Additional guide for mounting LED profiles in specialized configurations.
    Substrato
    Base material on which the printed circuit of the LED strip is built (flexible polyimide or rigid aluminum).
    Subtractive color mixing
    Subtractive color mixing; used in filters, not in LEDs.
    Sunlight spectrum
    Spectrum of sunlight; reference for full-spectrum LEDs.
    SunLike
    Seoul Semiconductor LED technology using violet phosphors for a spectrum similar to natural sunlight.
    Sunrise simulation
    Dawn simulation with LEDs gradually increasing brightness and CCT.
    Sunset simulation
    Sunset simulation with LEDs decreasing brightness and CCT.
    Superlumen
    Commercial term for LED chips with efficiency above the average of their category.
    Supermercato LED
    LED lighting for supermarkets; food lighting and savings.
    Supply chain LED
    Supply chain of LED components from manufacturer to installer.
    Supply voltage
    Supply voltage provided to the LED strip.
    Supporto alla progettazione LED
    Technical assistance for the design of the LED installation.
    Supporto commerciale LED
    Assistance in the sales phase of LED products.
    Supporto multilingue LED
    Technical support available in multiple languages for LED products.
    Supporto post vendita LED
    Technical support after the purchase and installation of the LED system.
    Supporto tecnico LED
    Technical support provided by the manufacturer for LED products.
    Supporto tecnico specializzato LED
    Assistance from experts in LED technology.
    Surface brightness
    Apparent brightness of the surface of the LED diffuser.
    Surface finish
    Surface finish of the LED profile (anodized, painted, brushed).
    Surface mount profile
    LED profile for surface mounting.
    Surface temperature
    Temperature on the external surface of the LED profile during operation.
    Surge protection
    Protection against transient overvoltages of the mains; present in the best LED power supplies.
    Suspended ceiling
    Suspended ceiling; common location for recessed LED profiles.
    Suspension bracket
    Suspension element for hanging LED profiles from cables or rods.
    Suspension cable
    Steel cable for suspending LED profiles from the ceiling.
    Suspension kit
    Complete kit with cables, anchors, and tensioners for suspended LED profiles.
    Switching frequency
    Switching frequency of the switching power supply; influences size, efficiency, and noise.
    Swivel mount
    Swivel support for orienting an LED fixture.
    Symmetric distribution
    Symmetric light distribution relative to the optical axis.
    Sync cable
    Synchronization cable between master and slave LED controllers.
    System efficiency
    Overall efficiency of the LED installation: source + driver + optics + thermal.
    System integrator
    Professional integrating LED components from different suppliers into a functioning system. ↑ Back to top

    T

    T-bar adapter
    Adapter for mounting LED profiles in the T-structure of the suspended ceiling.
    T-bar ceiling
    Suspended ceiling with T-structure for modular LED panels.
    T-channel profile
    LED profile with T cross-section for bidirectional mounting.
    T-connector
    T-shaped connector for branches on LED lines.
    T-piece connector
    T-shaped connector for branching LED strips at 90 degrees.
    T-shaped profile
    LED profile with T cross-section for double light emission.
    T-slot
    T-groove in the LED profile for insertion of sliding accessories.
    Tab connector
    Tongue connector for quick connections on LED strips.
    Tab terminal
    Tongue terminal for Faston connections on LED power supplies.
    Tack solder
    Temporary soldering to temporarily fix a component in place.
    Tack weld
    Spot welding to temporarily fix LED components.
    Tail cable
    Pre-soldered terminal cable on the LED strip for connection.
    Tailored solution
    Custom LED solution tailored to specific project requirements.
    Tailored spectrum
    Custom LED spectrum for specific project requirements.
    Tandem wiring
    Tandem wiring of two LED fixtures on a single power line.
    Tangential fan
    Tangential fan for cooling high-power LED fixtures.
    Task area
    Visual task area requiring a specific LED illuminance level.
    Task lamp LED
    LED desk lamp for visual task lighting.
    Task lighting
    Functional LED lighting focused on the work area.
    Task/ambient ratio
    Ratio between work area illuminance and ambient illuminance.
    Tear strength
    Tear resistance of the flexible LED strip material.
    Technical compliance
    Technical compliance of the LED product with project specifications.
    Technical data sheet
    Document with all LED product specifications.
    Technical drawing
    Technical drawing with dimensions and tolerances of the LED profile.
    Technical support
    Technical support provided by the manufacturer for LED system installation.
    Teflon cable
    Cable with PTFE insulation for high temperatures near high-power LEDs.
    Telecommunications closet
    Technical cabinet where LED controllers and gateways can be housed.
    Telescopic mount
    Height-adjustable telescopic support for LED fixtures.
    Tempered glass
    Toughened glass used for walkable LED profile diffusers.
    Tempered glass lens
    Tempered glass lens for impact-resistant LED fixtures.
    Temperature alarm
    Alarm signalling that the temperature limit in the LED system has been exceeded.
    Temperature coefficient
    Variation of an LED parameter per degree of temperature.
    Temperature compensation
    Circuit adjusting LED current based on the measured temperature.
    Temperature controlled fan
    Fan with speed regulated by temperature for high-power LEDs.
    Temperature cycle test
    Resistance test to repeated thermal shocks.
    Temperature derating curves
    Curves showing the power reduction of the LED power supply as a function of temperature.
    Temperature fuse
    Thermal fuse that interrupts the circuit due to overtemperature.
    Temperature gradient
    Temperature variation along the LED strip; to be minimised.
    Temperature limit switch
    Thermal switch that turns off the LED when the temperature limit is exceeded.
    Temperature mapping
    Mapping of the temperature distribution on a functioning LED profile.
    Temperature monitoring system
    Continuous temperature monitoring system of the LED system.
    Temperature probe
    Temperature probe for point monitoring of the LED profile.
    Temperature range (operating)
    Temperature range within which the LED system operates correctly.
    Temperature rating
    Thermal classification of an LED component according to standards.
    Temperature recovery
    Recovery time of normal temperature after LED switch-off.
    Temperature rise test
    Test measuring the temperature increase of the LED system in operation.
    Temperature sensor
    Integrated temperature sensor for thermal monitoring.
    Temperature setpoint
    Target temperature for thermal control of the LED system.
    Temperature switch
    Switch that commutates based on temperature for LED protection.
    Temporary lighting
    Temporary LED lighting for construction sites, events or emergencies.
    Tensile strength
    Tensile strength of the materials of LED profiles and cables.
    Tensioner (cable)
    Device for tensioning the suspension cables of LED profiles.
    Tenth-angle
    Angle at which LED intensity drops to 10% of maximum; equivalent to field angle.
    Terminal block
    Terminal block for orderly connection of LED cables.
    Terminal block connector
    Terminal block with connectors for orderly wiring of the LED system.
    Terminal box
    Box of terminals for LED system connections.
    Terminal cover
    Protective cover of the LED power supply terminals.
    Terminal identification
    Identification of LED power supply terminals: L, N, PE, V+, V−.
    Terminal lug
    Cable lug for connecting cables to LED power supply terminals.
    Terminal marking
    Marking of terminals for identification of LED connections.
    Terminal screw
    Screw of the terminal for fixing cables on the LED power supply.
    Terminal strip
    Strip of terminals for distributing power supply to multiple LED strips.
    Terminal with cable gland
    End cap with integrated cable gland seal for IP protection.
    Terminal with pre-drilled hole
    End cap with a pre-drilled hole for cable passage.
    Termination kit
    Kit for LED strip termination: end cap, silicone, sleeve.
    Termination point
    Final point of the LED strip where the circuit closes.
    Test bench
    Test station for verifying LED strips and power supplies.
    Test certificate
    Certificate of tests performed on an LED product.
    Test equipment
    Instrumentation for testing and verification of LED systems.
    Test factory (LED)
    Quality control of LED products before shipping.
    Test jig
    Test fixture for quick verification of LED strips in production.
    Test lab
    Testing laboratory for measuring LED performance.
    Test light
    Portable LED light for testing and verifying electrical systems.
    Test mode
    Test mode of the LED controller for diagnostics and verification.
    Test point
    Access point on the PCB for measuring electrical parameters.
    Test procedure
    Standardised procedure for testing LED products.
    Test protocol
    Test protocol with parameters and acceptance criteria for LED products.
    Test report
    Report of test results performed on an LED product.
    Test result
    Result of a measurement or verification on an LED component.
    Test setup
    Configuration of the test bench for measuring LED performance.
    Test socket
    Test socket for verifying LED chips before mounting.
    Test terminal
    Terminal for temporary connection during LED system testing.
    Tester (instrument)
    Generic instrument for verifying electrical and optical LED parameters.
    Testing
    Functional verification of the LED system after installation.
    Testing final (LED)
    Final verification of the LED system before delivery to the customer.
    Testing frequency
    Frequency of periodic tests on the LED system; monthly, quarterly, annual.
    Testing functional (LED)
    Test of switching on, dimming and LED scene operations.
    Texture illumination
    LED lighting highlighting the texture of a surface with grazing light.
    THD (Total Harmonic Distortion)
    Total harmonic distortion introduced by the power supply onto the electrical network; low values indicate better quality.
    Theatre LED
    LED fixture for theatrical and stage lighting with scenes and advanced dimming.
    Thermal adhesive
    Thermally conductive adhesive for fixing and heat dissipation.
    Thermal adhesive pad
    Pre-cut thermally conductive adhesive pad for fixing LED strips.
    Thermal aging
    Accelerated aging of the LED due to exposure to high temperatures.
    Thermal analysis
    Thermal analysis of the LED system for verification of operating temperatures.
    Thermal barrier
    Thermal barrier between the LED strip and heat-sensitive surfaces.
    Thermal bridge
    Thermal bridge between the LED strip and the profile; to be optimised for dissipation.
    Thermal bypass
    Alternative path for heat when the main path is obstructed.
    Thermal camera
    Instrument visualising temperature distribution; used to verify dissipation of LED profiles.
    Thermal coefficient of resistance
    Variation of LED component resistance with temperature.
    Thermal compliance
    Thermal compliance of the LED system with specified temperature limits.
    Thermal compound
    See Thermal paste. Compound for improving thermal contact.
    Thermal conductivity
    Capacity to conduct heat; aluminium 150–200 W/mK.
    Thermal contact resistance
    Thermal resistance at the interface between LED strip and profile.
    Thermal cycling
    Repeated thermal stress that can cause fatigue failures.
    Thermal derating table
    Derating table of the LED power supply as a function of temperature.
    Thermal design
    Thermal design of the LED system to ensure long lifespan.
    Thermal dissipation
    Capacity of the profile or substrate to transfer LED heat to the surrounding environment.
    Thermal dissipation rate
    Speed of heat dissipation from the LED profile to the environment.
    Thermal efficiency
    Efficiency of the thermal management of the LED system.
    Thermal epoxy
    Thermally conductive epoxy adhesive for permanent fixing of LED strips.
    Thermal equilibrium
    Steady state in which the temperature of the LED system stabilises.
    Thermal expansion
    Thermal expansion of LED profile materials due to temperature variations.
    Thermal foldback
    Automatic reduction of LED current when temperature exceeds the threshold.
    Thermal gap filler
    Material filling the space between LED strip and profile for thermal conduction.
    Thermal gradient analysis
    Analysis of the temperature gradient along the LED strip.
    Thermal grease
    See Thermal paste.
    Thermal imaging
    Thermal detection with thermal camera for diagnostics of the LED system.
    Thermal impedance
    Resistance to heat flux in dynamic regime (transient).
    Thermal insulation (profile)
    Thermal insulation between the warm LED profile and heat-sensitive mounting surface.
    Thermal insulator
    Thermal insulator for protecting heat-sensitive surfaces from LED heat.
    Thermal interface material (TIM)
    Material (thermal paste, pad, adhesive) interposed between LED strip and profile to improve heat transfer.
    Thermal joint
    Thermal junction between the LED strip and the heat sink profile.
    Thermal limit
    Maximum permitted temperature for LED operation.
    Thermal load
    Thermal load generated by the LED strip and dissipated by the profile.
    Thermal management
    Overall design of thermal management: profile, TIM, ventilation to ensure long LED lifetime.
    Thermal map
    Map of the temperature distribution on a functioning LED profile.
    Thermal mass
    Thermal mass of the LED profile; higher = greater thermal inertia.
    Thermal model
    Mathematical model or simulation of the thermal distribution in the LED system.
    Thermal monitoring
    Continuous monitoring of the temperature of the LED system.
    Thermal optimization
    Optimisation of thermal management to maximise LED lifespan.
    Thermal overshoot
    Temporary exceeding of the steady-state temperature during the transient.
    Thermal pad
    Pre-cut thermally conductive sheet inserted between strip and profile bottom; alternative to thermal paste.
    Thermal paste
    Thermally conductive compound applied between the LED strip and the profile to improve heat transfer.
    Thermal path
    Path of heat from LED chip to the environment through PCB, TIM and profile.
    Thermal performance
    Thermal performance of the LED system: resistance, temperature, dissipation.
    Thermal profile
    Temperature trend over time during LED switch-on.
    Thermal protection device
    Device that intervenes to protect the LED from overtemperature.
    Thermal relief pad
    Pad with reduced thermal connection to facilitate soldering on the LED strip.
    Thermal resistance (Rth)
    Measure of the difficulty with which heat flows from the LED chip to the environment; expressed in °C/W.
    Thermal resistance chain
    Chain of thermal resistances from LED die to the environment.
    Thermal resistance of the profile
    Capacity of the LED profile to transfer heat from strip to environment.
    Thermal room inspection
    Inspection with thermal camera to identify hot spots on the LED profile.
    Thermal runaway
    Condition of thermal instability in which temperature increase causes greater current absorption, with risk of LED destruction.
    Thermal runaway prevention
    Measures to prevent thermal instability in the LED system.
    Thermal sensor placement
    Optimal position of the temperature sensor on the LED profile.
    Thermal shutdown recovery
    Recovery time after shutdown due to overtemperature of the LED power supply.
    Thermal simulation
    Computerised simulation of the thermal distribution.
    Thermal stability
    Ability of the LED system to maintain stable performance as temperature varies.
    Thermal stack
    Sequence of thermal layers from LED chip to environment: die, substrate, TIM, profile, air.
    Thermal stress
    Thermal stress on LED components due to temperature variations.
    Thermal substrate
    Thermally conductive substrate of the LED PCB: aluminium, copper, ceramic.
    Thermal tape
    Thermally conductive double-sided tape for fixing LED strips to the profile.
    Thermal throttling
    Automatic reduction of LED performance to maintain temperature.
    Thermal transfer area
    Contact surface between LED strip and profile for heat transfer.
    Thermal vent
    Opening for ventilation in the profile or LED fixture.
    Thermal via
    Metallised hole in the PCB for transferring heat from the upper to the lower layer.
    Thermistor
    Temperature sensor with resistance variation; for LED thermal protection.
    Thermistor NTC
    Negative coefficient sensor for LED temperature monitoring.
    Thermistor protection circuit
    Circuit with thermistor protecting the LED from overtemperature.
    Thermistor PTC
    Positive coefficient sensor; used as resettable fuse for LEDs.
    Thermocouple
    Thermocouple for precise temperature measurement of the LED system.
    Thermocouple (portable)
    Portable instrument for measuring the temperature of the LED profile in operation.
    Thermoplastic housing
    Thermoplastic enclosure for lightweight and insulating LED fixtures.
    Thermoset housing
    Thermoset enclosure for heat-resistant LED fixtures.
    Thick film resistor
    Thick-film resistor on the LED strip for current limitation.
    Thick wall profile
    LED profile with thick walls for maximum rigidity and dissipation.
    Thin client (LED)
    Lightweight terminal for remote management of the LED system.
    Thin film LED
    LED with removed substrate to improve efficiency and dissipation.
    Thin profile
    LED profile with reduced thickness for ultra-thin installations.
    Thin wall profile
    LED profile with thin walls for lightness; lower thermal dissipation.
    Third-party certification
    Certification from an independent body for LED products.
    Thread (protocol)
    Low-consumption IP mesh protocol for IoT and smart lighting.
    Three-channel controller
    Controller with three channels for RGB LED strips.
    Three-phase dimmer
    Dimmer for three-phase systems with large LED loads.
    Three-phase power
    Three-phase power supply; for large-power industrial LED systems.
    Three-pin connector
    Three-pin connector for CCT LED strips.
    Three-wire dimming
    Dimming with three wires: phase, dimmed phase and neutral.
    Threshold current
    Minimum current required for light emission from the LED.
    Threshold dimming level
    Minimum dimming level at which the LED still emits visible light.
    Threshold voltage
    Minimum voltage for LED switch-on; approximately 2–3 V for white LEDs.
    Through bolt
    Through bolt for fixing LED profiles on metal structures.
    Through connector
    Through connector for connecting two LED cables with continuity.
    Through-wiring
    Through wiring; cables pass through the LED fixture to connect the next one.
    Throw distance
    Distance between the LED fixture and the illuminated surface.
    Tilt angle
    Tilt angle of a LED fixture relative to the vertical axis.
    Tilt mechanism
    Tilt mechanism for adjustable LED fixtures.
    Tilt sensor
    Tilt sensor for LED fixtures detecting angular position.
    Tilt switch
    Tilt switch that activates/deactivates the LED based on position.
    Timber mount
    Mounting of LED profiles on wooden structures.
    Time clock
    Programmable clock for time-based management of LED lighting.
    Time delay dimming
    Dimming with programmable time delay.
    Time delay relay
    Time-delay relay for LED switch-on/switch-off delay.
    Time lapse (LED)
    Time-lapse function of LED brightness to observe gradual variations.
    Time-of-flight sensor
    Time-of-flight sensor for distance and presence detection for LEDs.
    Timed override
    Temporary override of the LED programme with automatic return.
    Timer
    Device programming LED system switch-on and switch-off based on preset times.
    Timer function
    Timer function of the LED controller for time-based programming.
    Timer module
    Dedicated timer module for programming LED lighting.
    Timer relay
    Time-delay relay for controlling LED switch-on/switch-off.
    Timer smart LED
    Programmable timer in the smart app for LED lighting automation.
    Timing diagram
    Time diagram of the PWM signal or LED control protocol.
    Tin coating
    Tinning of the LED strip soldering pads to prevent oxidation.
    Tin lead solder
    Tin-lead solder; non-RoHS compliant, replaced by lead-free.
    Tin plated connector
    Tinned connector for good solderability and corrosion resistance.
    Tin plating
    Tinning of contacts to prevent oxidation and facilitate soldering.
    Tint
    Chromatic shade; small deviation from pure white in the LED.
    TIR optic module
    Interchangeable TIR optical module for LED fixtures.
    Titanium dioxide
    Titanium dioxide used as white pigment in opal LED diffusers.
    Titanium finish
    Titanium colour finish on LED profiles; modern and resistant aesthetics.
    Tj max
    Maximum permitted junction temperature of the LED; exceeding it causes irreversible degradation.
    TM-21
    IES standard projecting LM-80 data to estimate the useful lifetime of LEDs beyond the test period.
    TM-21 projection
    Projection of the LED useful lifetime based on LM-80 data.
    TM-30
    Advanced colour rendering evaluation method (IES) with 99 colour samples; more complete than traditional CRI.
    TM-30 report
    Complete TM-30 colour rendering report with Rf and Rg values.
    Toggle action
    Switch-on/switch-off action with a single button for LED.
    Toggle switch
    Lever switch for manual on/off control of the LED.
    Toilet LED
    LED lighting for toilets; IP44 and high CRI.
    Tolerance band
    Tolerance band on the parameters of the LED product.
    Tone mapping
    Tonal mapping for the conversion of HDR colours on LED displays.
    Tool-free connector
    Connector requiring no tools for installation.
    Tool-free installation
    Installation of the LED profile without need for tools.
    Tool-free mounting
    Mounting system for LED profile without need for tools.
    Tooling cost
    Cost of moulds and dies for customised LED profiles.
    Top entry connector
    Connector with top cable input for ceiling-mounted installations.
    Top hat profile
    LED profile with omega cross-section for DIN rail mounting.
    Top mount
    Mounting of the LED profile on the upper surface of an element.
    Top-emitting LED
    LED emitting from the upper face; standard configuration.
    Torque specification
    Recommended tightening torque for LED profile fixing screws.
    Total cost of ownership (TCO)
    Total cost of ownership of the LED system including purchase, installation, energy and maintenance.
    Total flux
    Total luminous flux emitted from an LED source in all directions.
    Total harmonic current
    Total harmonic current generated by the power supply on the network.
    Total luminous flux
    Total luminous flux emitted by the complete LED fixture.
    Total system power
    Total power of the LED system including driver and losses.
    Total wattage
    Overall power of all LED strips connected in the system.
    Touch dimming speed
    Speed of brightness variation during touch on the capacitive dimmer.
    Touch pad
    Touch-sensitive surface on a wall-mounted LED controller.
    Touch panel controller
    LED controller with touchscreen panel for advanced management.
    Touch sensor module
    Touch sensor module to integrate in LED profiles.
    Touch switch
    Touch switch for LED switching on.
    Touchless control
    LED control without contact via proximity sensors or gestures.
    Toxicity (LED materials)
    Absence of toxic materials in modern LED products; RoHS compliance.
    Track adapter
    Adapter for mounting LED fixtures on existing electrified tracks.
    Track connector
    Connector for joining sections of electrified LED track.
    Track curved
    Bendable LED track for following architectural shapes.
    Track electrified
    Linear power supply system for adjustable LED spotlights.
    Track end cap
    End cap of the electrified LED track.
    Track end feed
    Power supply of the LED track from the end.
    Track feed point
    Power supply point of the electrified LED track.
    Track joiner
    Joint for connecting two sections of LED track.
    Track length
    Length of the electrified LED track.
    Track lighting
    Lighting on electrified track with adjustable LED spotlights.
    Track lighting system
    Complete system of electrified track with LED spotlights.
    Track magnetic LED
    Track with magnetic fixing system for LED spotlights.
    Track power capacity
    Maximum power capacity of the electrified LED track.
    Track recessed
    Recessed electrified LED track in the ceiling; flush-to-flush.
    Track shipment tracking (LED)
    Monitoring the position of the LED parcel during transport.
    Track smart LED
    Electrified track with integrated wireless control for LED spotlights.
    Track spotlight
    LED spotlight mounted on electrified track.
    Track system accessories
    Accessories for LED track: connectors, curves, end caps, adapters.
    Track three-phase
    LED track with three independent circuits for different spotlight groups.
    Trace impedance
    Impedance of the PCB tracks of the LED strip.
    Trace resistance
    Electrical resistance of copper tracks on the LED strip PCB.
    Trace width design
    PCB track width design for current and dissipation.
    Traceability LED
    System for tracking LED products from production to installation.
    Traffic light controller
    Controller for LED traffic lights with phase and timing management.
    Traffic light LED
    LED traffic light; technology using high-power chips in parallel.
    Trailing edge (dimming)
    Descending phase cutting; more compatible with LEDs than leading edge.
    Trailing edge compatibility
    Compatibility of the LED driver with trailing edge dimmers (MOSFET/IGBT).
    Training (LED)
    Training courses for installers and designers of LED systems.
    Training continuous LED
    Constant professional update on LED technology news.
    Training for LED designers
    Technical courses for professionals on LED design.
    Training for LED installers
    Technical courses for professionals on LED system installation.
    Tram LED
    LED lighting for trams and rail vehicles.
    Transconductance amplifier
    Transconductance amplifier in LED control circuits.
    Transfer function
    Transfer function of the LED system: input-output relationship.
    Transformer (for LED)
    See Power supply. Voltage conversion device.
    Transformer electronic
    High-frequency transformer for halogen; not always compatible with LEDs.
    Transformer isolation
    Galvanic insulation of the transformer in the LED power supply.
    Transformer planar
    Low-profile transformer for compact LED drivers.
    Transformer ratio
    Transformation ratio in the LED switching power supply.
    Transformer temperature
    Operating temperature of the transformer in the LED power supply.
    Transformer toroidal
    Linear transformer with toroidal core; rarely used for LEDs.
    Transient overvoltage
    Transient mains overvoltage that can damage the LED.
    Transient protection
    Protection against transient voltage peaks on the electrical network.
    Transient response
    Response of the LED driver to rapid load variations.
    Transient suppressor
    Transient suppressor for protection of LED circuits.
    Transient voltage suppressor (TVS)
    Component absorbing voltage peaks to protect the LED.
    Translucent material
    Material letting light through in a diffused manner; for LED diffusers.
    Translucent panel
    Translucent panel backlit with LED strip.
    Transmittance
    Percentage of light passing through a material (diffuser); an opal diffuser has approximately 70% transmittance, a transparent one approximately 95%.
    Transmittance diffuser frosted
    Percentage of light passing through the frosted diffuser; typically 80–85%.
    Transmittance diffuser opal
    Percentage of light passing through the opal diffuser; typically 65–75%.
    Transmittance diffuser transparent
    Percentage of light passing through the transparent diffuser; typically 92–95%.
    Transmission loss
    Loss of luminous flux through the diffuser or lens.
    Transparency
    Degree of transparency of the LED diffuser; transparent, frosted, opal.
    Transparent material
    Material letting light through without diffusion.
    Transport of LED products
    Handling and shipping of LED products with adequate packaging.
    Transport packaging
    Packaging for safe transport of LED profiles and strips.
    Trap door access
    Access hatch for maintenance of LED power supplies in the suspended ceiling.
    Tray
    Container for transport and storage of LED components.
    Tread light
    LED light integrated in the stair tread for staircase lighting.
    Tree mount LED
    LED fixture for mounting on trees in landscape lighting.
    Trellis lighting
    LED lighting of pergolas and garden trellises.
    Trend lighting
    Current trends in LED lighting: linear, minimal, smart, circadian.
    Tri-color LED
    LED with three dies of different colours (RGB) in the same package.
    Tri-proof fixture
    LED fixture resistant to water, dust and impacts (IP65-IK08); for industrial environments and car parks.
    TRIAC
    Semiconductor component used in phase-cut dimmers for brightness adjustment.
    Triangular profile
    LED profile with triangular cross-section for angles and edges.
    Trick dimming
    Technique for tricking a dimmer that requires a minimum load higher than an LED load.
    Trigger device
    Device activating an event in the LED system: sensor, button, timer.
    Trigger input
    Input of the LED controller for external activation signals.
    Trigger level
    Threshold level for activation of the sensor in the LED system.
    Trigger mode
    Activation mode: continuous, pulsed, delayed, cyclic.
    Trim (finishing)
    Visible finishing element of a recessed LED fixture.
    Trim adapter
    Adapter for mounting different finishes on a LED fixture.
    Trim colour
    Colour of the visible frame of a recessed LED fixture.
    Trim level
    Finish level of a LED profile: standard, premium, custom.
    Trim ring
    Decorative ring covering the edge of a recessed LED downlight.
    Trim style
    Style of the visible edge of a recessed LED fixture.
    Trimless housing
    Housing for LED downlight without visible frame.
    Trimless installation
    LED installation recessed without visible edge; perfectly flush.
    Trimmer potentiometer
    Fine-adjustment potentiometer on the LED driver board.
    Triple insulated wire
    Wire with triple insulation for maximum safety in the LED driver.
    Triple insulation
    Triple electrical insulation for maximum safety in the LED driver.
    Troffer
    Rectangular recessed LED fixture for modular suspended ceilings.
    Troffer ceiling mount
    Ceiling mounting of troffer-type LED fixtures for modular suspended ceilings.
    Tropical climate rated
    LED fixture certified for operation in tropical climates.
    Trough fitting
    Trough LED fixture for industrial linear lighting.
    True colour rendering
    Excellent colour rendering reproducing colours with maximum fidelity.
    True white
    Pure white at 4000 K without chromatic cast.
    Trunnion mount
    Adjustable U-bracket for outdoor LED projectors.
    Truss mount
    Mounting of LED fixtures on trusses and rigs for events.
    Trust mark
    Certification mark ensuring the quality of the LED product.
    TTL signal
    TTL logic signal (0–5 V) used in some digital LED controllers.
    Tube clamp
    Clamp for fixing LED neon flex on tubular structures.
    Tube fitting
    Tubular LED fixture for replacing fluorescent tubes.
    Tube guard
    Polycarbonate protection for LED tubes in industrial environments.
    Tube mount bracket
    Bracket for mounting LED tubes on surfaces.
    Tumble test
    Drop test to verify the mechanical resistance of LED fixtures.
    Tunable white
    LED strip with adjustable colour temperature from warm to cool.
    Tundra white
    Very cool colour temperature (>6500 K); for special applications.
    Tungsten equivalent
    Equivalent tungsten power of an LED source.
    Tungsten halogen replacement
    Replacement of tungsten halogen lamps with LED sources.
    Tunnel entrance lighting
    Specific LED lighting for tunnel entrances with light transition zone.
    Tunnel exit lighting
    LED lighting for tunnel exits with adaptation to daylight.
    Tunnel interior lighting
    LED lighting for the inner zones of tunnels.
    Tunnel lighting
    Specific LED lighting for road tunnels.
    Turbidity sensor
    Turbidity sensor for LEDs in water treatment systems.
    Turn signal LED
    LED direction indicator for vehicles.
    Turn-on time
    Time required for the LED to reach full flux; practically instantaneous.
    Turnkey solution
    Turnkey LED solution: design, supply, installation, testing.
    Turtle-friendly LED
    Coastal LED lighting with amber spectrum that does not disturb sea turtles.
    Tutorial installation LED
    Video or written guide for mounting the LED system.
    Tuya Smart app
    Tuya application for controlling Wi-Fi LED devices.
    Twilight function
    Twilight function of the light sensor for automatic LED switch-on.
    Twilight sensor
    Device detecting the natural light level and commanding automatic LED switch-on/switch-off.
    Twist connector
    Twist connector for quick cable joints in LED systems.
    Twist lock
    Rotation lock for fixing LED fixtures on tracks.
    Twisted pair cable
    Twisted pair cable for DMX and DALI signals.
    Two-channel controller
    Controller with two channels for CCT LED strips (warm white + cool white).
    Two-circuit track
    Electrified track with two independent circuits for LEDs.
    Two-pin connector
    Two-pin connector for monochromatic LED strips.
    Two-stage dimming
    Dimming in two stages: full brightness and reduced level.
    Two-wire connection
    Two-wire connection for monochromatic LED strips (+ and −).
    Two-wire dimming
    Two-wire dimming (phase and return) without neutral; for TRIAC.
    Type approval
    Type approval for LED products according to applicable regulations.
    Type designation
    Type designation of the LED product in the manufacturer's catalogue.
    Type test
    Type test performed on a representative sample for LED certification.
    TÜV certification
    Safety certification issued by the German body TÜV for lighting fixtures and power supplies.
    ↑ Back to top

    U

    U-bolt mount
    Mounting with U-bolt for LED profiles on pipes.
    U-channel profile
    LED profile with open U cross-section at the top.
    U-shaped bracket
    U-shaped bracket for fixing LED fixtures.
    U-shaped profile
    LED profile with U cross-section for strip and diffuser.
    UART
    Asynchronous serial interface used in some LED controllers for communication.
    UFO high bay
    Disc-shaped industrial LED high bay for high ceilings.
    UGR (Unified Glare Rating)
    Unified glare index on a scale of 10–30; values ≤19 for offices, ≤22 for industrial areas.
    UGR 16
    Very low UGR value for environments with high visual requirements such as drawing rooms.
    UGR 19
    Standard UGR value for offices and work environments with LEDs.
    UGR 22
    Acceptable UGR value for industrial and commercial environments with LEDs.
    UGR 25
    Maximum UGR value for corridors and transit zones with LEDs.
    UGR 28
    Acceptable UGR value for environments with low visual requirements.
    UGR (detailed calculation)
    Calculation of the Unified Glare Rating based on position, luminance and angle of the LED.
    UL 8750
    UL standard specific for LED fixtures and components.
    UL certification
    UL safety certification for the North American LED product market.
    UL compliance test
    UL compliance test for LED products.
    UL listed
    LED product included in the UL list as compliant with safety standards.
    UL recognized
    UL-recognised LED component for use in certified fixtures.
    UL safety mark
    UL safety mark affixed to certified LED products.
    UL testing laboratory
    Authorised UL laboratory for LED safety testing.
    UL (Underwriters Laboratories)
    American safety certification body for electrical products, including LEDs and power supplies.
    Ultra compact driver
    Ultra-compact LED driver for minimal spaces.
    Ultra flat downlight
    LED downlight with extremely reduced thickness.
    Ultra high CRI LED
    LED with CRI above 97; for critical applications.
    Ultra high density COB
    COB strip with density above 512 LEDs/m.
    Ultra high efficiency driver
    LED driver with efficiency above 97%.
    Ultra low power standby
    LED power supply with standby consumption below 0.1 W.
    Ultra narrow strip
    LED strip with width below 4 mm.
    Ultra short throw LED
    Ultra-short throw LED projector for close-range installation.
    Ultra thin diffuser
    LED diffuser with very reduced thickness for ultra-slim profiles.
    Ultra thin PCB
    LED strip PCB with reduced thickness for minimal installations.
    Ultra-efficient LED
    LED with luminous efficacy above 200 lm/W.
    Ultra-low power LED
    Extremely low-consumption LED for indicators and signage.
    Ultra-narrow beam
    Extremely narrow LED beam (below 10 degrees).
    Ultra-slim profile
    LED profile with height below 7 mm.
    Ultra-thin strip
    LED strip with reduced PCB thickness for minimal installations.
    Ultra-warm white (2200 K)
    Very warm colour temperature for intimate environments.
    Ultraviolet curing LED
    UV LED for curing adhesives and inks.
    Ultraviolet (UV)
    Radiation below 400 nm; UV LEDs are used for sterilisation, curing and special applications.
    Umbrella bracket
    Bracket for mounting LEDs under parasols and sunshades.
    Umbrella light LED
    LED light integrated in a parasol for outdoor table lighting.
    Umbrella reflector
    Umbrella-shaped reflector for distributing LED light broadly and uniformly.
    Under bench LED
    LED lighting under workbenches.
    Under bridge LED
    LED lighting under bridges and viaducts.
    Under cabinet connector
    Specific connector for under-cabinet kitchen LED strips.
    Under cabinet kit
    Complete kit for under-cabinet LED lighting.
    Under cabinet profile
    LED profile specific for under-cabinet mounting.
    Under counter LED strip
    LED strip for under-counter lighting.
    Under deck LED
    LED lighting under terraces and decking.
    Under eave LED
    LED lighting under the roof eave.
    Under handrail LED
    LED strip under the handrail for staircase lighting.
    Under shelf LED
    LED lighting mounted under shelves to enhance displayed objects.
    Under shelf profile
    LED profile for under-shelf mounting.
    Under stair LED
    LED lighting under stairs for decorative effect.
    Under-cabinet application
    LEDs for under-cabinet and tall furniture lighting; typical in kitchens and closets.
    Under-cabinet LED
    LED lighting mounted under kitchen cabinets for the work surface.
    Under-cabinet light
    Under-cabinet LED light; for kitchen work surfaces.
    Under-counter light
    Under-counter LED light; for service area lighting.
    Underdrive
    Driving the LED at a current below the nominal value; extends lifetime at the expense of brightness.
    Underground cable
    Buriable cable for powering outdoor garden LED systems.
    Underground junction box
    Buriable junction box for outdoor LED systems.
    Underlighting
    Lighting from below directed upwards for decorative effect.
    Underlit effect
    Upward lighting effect for enhancing objects and furnishings.
    Undershelf lighting
    LED lighting under shelves for enhancing displayed objects.
    Underwater cable
    Underwater cable for LED systems in pools and fountains.
    Underwater connector
    IP68 underwater connector for LED joints in pools and fountains.
    Underwater control box
    Underwater control box for pool LEDs.
    Underwater fixture
    LED fixture designed for permanent immersion.
    Underwater housing
    IP68 underwater enclosure for LED fixtures.
    Underwater installation
    Installation of LED strips and fixtures in underwater environments.
    Underwater junction box
    Underwater junction box for LED systems.
    Underwater LED
    Strip or LED fixture for underwater applications (IP68).
    Underwater spotlight
    Underwater LED spotlight for pools and fountains.
    Uni-color strip
    Monochromatic single-colour LED strip.
    Uni-directional connector
    Connector that inserts in one direction only to prevent errors.
    Unidirectional light
    LED light emitted in a single direction; high efficiency in targeted lighting.
    Unified control
    Unified control of different types of LED fixtures from a single system.
    Unified glare rating limit
    UGR limit value for visual comfort: 19 for offices, 22 for industry.
    Uniform beam
    LED beam with uniform distribution of intensity.
    Uniform brightness
    Uniform brightness across the entire LED diffuser surface.
    Uniform colour
    Uniform colour along the entire LED strip; guaranteed by binning.
    Uniform colour space
    Perceptually uniform colour space; CIE 1976 is more uniform than CIE 1931.
    Uniform distribution
    Light distribution ensuring uniformity across the entire illuminated surface.
    Uniform heating
    Uniform heating of the LED profile along its entire length.
    Uniform illuminance design
    LED project ensuring uniform illuminance on the target surface.
    Uniform light output
    Uniform luminous flux along the entire LED strip.
    Uniform spacing
    Uniform spacing between LED fixtures for constant illuminance.
    Uniformity
    Ratio between the minimum and average (or maximum) illuminance value on a surface; quality index.
    Uniformity between LED fixtures
    Consistency of brightness and colour between different LED fixtures from the same batch.
    Uniformity chromatic
    Consistency of the colour emitted along the entire LED strip or between multiple fixtures; guaranteed by tight binning.
    Uniformity chromatic strip
    Consistency of colour along the LED strip and between different batches.
    Uniformity luminous strip
    Consistency of brightness along the entire LED strip.
    Uniformity of illuminance
    Ratio between minimum and average illuminance on the surface; target >0.6.
    Uniformity of the line of light
    Absence of brightness variations along the LED profile.
    Uninterruptible power supply LED
    Uninterruptible power supply ensuring LED lighting without interruptions.
    Unit cost
    Unit cost of the LED product for budget calculation.
    Universal bracket
    Universal mounting bracket adaptable to different LED profile models.
    Universal connector
    Universal connector compatible with different LED strips.
    Universal dimmer
    Dimmer compatible with LEDs, halogens and incandescents.
    Universal driver
    LED driver compatible with a wide range of voltages and currents.
    Universal driver compatibility
    Compatibility of the LED driver with different dimming protocols.
    Universal input
    Power supply with universal input (100–277 V AC); for international markets.
    Universal input driver
    LED driver with universal input 100–277 V AC for global markets.
    Universal mount
    Mounting system adaptable to different surfaces and configurations.
    Universal mounting plate
    Universal mounting plate for different LED power supplies.
    Universal remote
    Programmable universal remote control for different LED systems.
    Universal sensor
    Universal sensor compatible with different LED control systems.
    University application
    LEDs for university campuses; smart lighting and energy efficiency.
    University LED
    LED lighting for university campuses; smart and efficient.
    DMX universe
    Set of 512 DMX channels managed from a single connection; large installations use multiple universes.
    Unregulated power supply
    Power supply without output regulation; not suitable for LEDs.
    Unshielded cable
    Cable without shielding; for LED power supply in non-disturbed environments.
    Unshielded twisted pair
    UTP cable for low-interference LED control signals.
    Up/down light fixture
    Bidirectional LED fixture with emission both upwards and downwards.
    Update firmware
    Procedure for updating the firmware of the LED controller.
    Update notification
    Notification of firmware update available for the LED controller.
    Update of the LED catalogue
    New edition of the catalogue with updated LED products.
    Update of the LED firmware
    New version of the LED controller software with improved functionality.
    Update technological LED
    Replacement of obsolete LED components with more efficient versions.
    Upgrade kit
    Kit for the technological upgrade of the existing LED system.
    Upgrade path
    Technological upgrade path for the existing LED system.
    Uplight
    LED lighting directed upwards; for indirect light reflected from the ceiling.
    Uplight fixture
    LED fixture directing light upwards.
    Upper flux ratio (ULOR)
    Ratio of flux directed upwards; to be minimised to reduce light pollution.
    Upper hemisphere flux
    Luminous flux emitted in the upper hemisphere of the LED fixture.
    UPS (for LED)
    Uninterruptible power supply ensuring LED lighting during blackouts.
    Upward flux ratio
    Percentage of light emitted upwards; to be minimised to reduce light pollution.
    Upward light output
    Luminous flux emitted upwards by the LED fixture.
    Urban design LED
    LED lighting for urban design: squares, streets, parks.
    Urban furniture LED
    LED lighting integrated in urban furniture: benches, planters, bollards.
    Urban LED master plan
    Master plan for urban LED lighting.
    Urban lighting
    LED lighting for public urban spaces.
    Urban renewal LED
    LED lighting for urban regeneration projects.
    Usable light
    Luminous flux actually useful after system losses.
    USB (power supply via)
    5 V DC power supply via USB port; used for small decorative or test LED strips.
    USB LED controller
    LED controller with USB interface for configuration from PC.
    USB power adapter
    USB adapter for powering small decorative LED strips.
    USB Type-C powered LED
    LED strip powered via USB-C port.
    User experience (UX)
    User experience with the LED lighting control system.
    User friendly interface
    Intuitive interface for controlling LED lighting.
    User group
    Group of users with specific permissions in the LED control system.
    User interface
    User interface of the LED controller: app, remote control, panel.
    User manual
    User manual of the LED product with installation and configuration instructions.
    User manual download
    Download of the LED product user manual from the manufacturer's website.
    User preference setting
    Setting of user lighting preferences in the LED system.
    User preset
    Custom setting saved by the user in the LED controller.
    User profile
    User profile with personalised preferences in the LED system.
    User training
    Training of the end user for using the LED system.
    Utility area LED
    LED lighting for service areas and technical rooms.
    Utility box
    Service cabinet for power supplies and LED controllers.
    Utility grade LED
    Base-level LED product for functional applications.
    Utility lighting
    Functional LED lighting for service and technical areas.
    Utility pole LED
    LED fixture mounted on utility poles for street lighting.
    Utility room LED
    LED lighting for laundry rooms and service areas.
    UV aging resistance
    Resistance to UV-ray aging of LED profile materials.
    UV aging test
    Accelerated aging test with UV exposure for diffusers and profiles.
    UV blocking diffuser
    Diffuser blocking the UV component of LED light.
    UV cured adhesive
    Adhesive cured with UV LED light for quick bonding.
    UV curing system
    UV LED system for quick curing of photosensitive materials.
    UV degradation
    Degradation of plastic materials due to prolonged UV exposure.
    UV degradation resistance
    Resistance to UV degradation of LED system materials.
    UV disinfection LED
    UV-C LED system for disinfection of surfaces and air.
    UV emission (white LED)
    Residual UV component in white LEDs; negligible in quality LEDs.
    UV exposure test
    Accelerated UV exposure test to verify resistance of the LED diffuser.
    UV filter
    Filter blocking the ultraviolet component in the LED diffuser.
    UV LED application
    Application of UV LED technology: curing, sterilisation, fluorescence.
    UV LED curing lamp
    UV LED lamp for curing gels, resins and inks.
    UV LED power
    Power of the UV LED expressed in milliwatts for the specific application.
    UV LED wavelength selection
    Choice of UV LED wavelength for the application: 365, 385, 395, 405 nm.
    UV protection rating
    Classification of the UV protection of the LED diffuser.
    UV resistant material
    UV-resistant material for outdoor LED profiles and diffusers.
    UV stabilizer
    Additive protecting diffuser material from UV degradation.
    UV stable diffuser
    LED diffuser with UV stabilisers for outdoor use without yellowing.
    UV stable silicone
    UV-resistant silicone for sleeves and sealants in outdoor LED systems.
    UV-A LED
    Long-wave ultraviolet LED (315–400 nm); used for fluorescent effects, curing and insect traps.
    UV-B LED
    Medium-wave UV LED (280–315 nm); medical and phototherapy applications.
    UV-C LED
    Short-wave ultraviolet LED (200–280 nm); for disinfection and sanitisation applications.
    ↑ Back to top

    V

    V-cut profile
    LED profile with V cross-section for internal 90-degree angles.
    V-groove cutting
    V-cut in wood or aluminium for insertion of corner LED profile.
    V-shape diffuser
    Diffuser with V cross-section for corner profiles.
    V-shaped light
    V-shaped light distribution obtained with corner LED profiles.
    Vacancy sensor
    Sensor that switches off LEDs when no people are detected; more restrictive than an occupancy sensor.
    Vacuum coating
    Vacuum coating for deposition of reflective films on LED profiles.
    Vacuum metallizing
    Vacuum deposition of metallic film for LED reflectors.
    Vacuum test
    Vacuum test for verifying the seal of sealed LED components.
    Valet lighting
    LED lighting for cloakroom and changing room areas.
    Validation test
    Validation test of LED product performance.
    Valley lighting
    LED lighting of architectural valleys between two roof pitches.
    Valley profile
    LED profile for installation in architectural valleys between two roof pitches.
    Value added LED
    Additional benefit offered by LED technology compared to alternatives.
    Value engineering
    Optimisation of the LED project to maximise performance while minimising costs.
    Value UGR LED
    Numerical glare index produced by the LED fixture.
    Valve controlled LED
    LED controlled by an optical shutter for beam adjustment.
    Valve dimmer
    Dimmer with HVAC interface for coordinating lighting and climate control.
    Vandal resistant bracket
    Anti-vandal bracket for LED profiles in public spaces.
    Vandal resistant connector
    Anti-tamper connector for public LED systems.
    Vandal resistant fastener
    Anti-tamper fixing with special screws for public LEDs.
    Vandal resistant profile
    Reinforced LED profile with IK10 protection for public spaces.
    Vandal-proof
    LED fixture resistant to acts of vandalism; high IK protection rating.
    Vanity LED mirror
    Mirror with perimeter LED lighting for make-up and personal care.
    Vanity light
    LED light for bathroom or toilet mirror; face illumination.
    Advantages of LED light
    Efficiency, lifespan, light quality, dimmability, absence of UV and mercury.
    Advantages of LED profile
    Thermal dissipation, strip protection, aesthetic finish, uniform distribution.
    Advantages of LED strip
    Flexibility, compactness, ease of cutting and installation, variety of CCT and colours.
    Vapor barrier
    Moisture barrier to prevent condensation on LED profiles.
    Vapor barrier tape
    Moisture barrier tape for protecting LED profiles from humidity.
    Vapor proof fixture
    Vapour-tight LED fixture for damp industrial environments.
    Vapor tight
    Vapour-tight LED fixture for damp industrial environments.
    Vapor tight enclosure
    Vapour-tight enclosure for LED power supplies.
    Variable beam fixture
    LED fixture with adjustable beam angle.
    Variable beam LED
    LED fixture with adjustable beam angle via movable optics.
    Variable CCT controller
    Controller for adjusting LED colour temperature.
    Variable CCT strip
    LED strip with adjustable CCT from warm to cool.
    Variable colour temperature
    See Tunable white. Adjustable CCT.
    Variable current driver
    LED driver with adjustable output current.
    Variable geometry optic
    LED optics with variable geometry for customised distributions.
    Variable intensity
    Adjustable LED luminous intensity via dimming.
    Variable output driver
    LED driver with adjustable output current or voltage.
    Variable output voltage
    Adjustable output voltage of the LED power supply.
    Variable speed chase
    Chase effect on addressable LED strips with adjustable speed.
    Variable speed effect
    Dynamic effect on addressable LED strips with adjustable speed.
    Varistor (MOV)
    Metal oxide varistor for surge protection of the LED driver.
    Vault LED fixture
    LED fixture for vaults and security rooms.
    Vault lighting
    LED lighting for armoured rooms and bank vaults.
    Vehicle mounted LED
    LED lighting mounted on vehicles for construction sites and emergencies.
    Velcro mount
    Velcro fixing for removable and repositionable LED strips.
    Vending machine LED
    LED lighting for vending machines.
    Vendor qualification
    Qualification of LED component suppliers to guarantee quality.
    Venetian blind LED
    LED lighting integrated in venetian blind slats.
    Vent hole
    Ventilation hole in the LED profile or fixture for heat dissipation.
    Ventilated ceiling LED
    Ventilated suspended ceiling with integrated LED profiles.
    Ventilated enclosure
    Ventilated enclosure for LED power supplies with ventilation grilles.
    Ventilated profile
    LED profile with openings for ventilation and thermal dissipation.
    Ventilation accessory
    Element that promotes airflow inside the LED profile for thermal dissipation.
    Ventilation gap
    Ventilation space between the LED profile and the surface for thermal dissipation.
    Ventilation passive
    Heat dissipation without fans, by natural convection only; typical of well-sized LED profiles.
    Ventilation slot
    Slot in the LED profile for facilitating air convection.
    Veranda LED
    LED lighting for verandas; IP44 and integration with furniture.
    Verification electrical (LED system)
    Control of the LED system with electrical measuring instruments.
    Verification functional (LED)
    Test of switching on and dimming of the LED system.
    Verification illuminance (LED)
    Lux meter measurement of the illuminance produced by the LED system.
    Verification of compliance (LED)
    Check that the LED system meets the project specifications.
    Verification of consumption (LED)
    Measurement of the actual consumption of the LED system after installation.
    Verification of flux (LED)
    Measurement of the actual luminous flux of the installed LED system.
    Verification of safety (LED)
    Electrical safety test of the LED system after installation.
    Verification of uniformity (LED)
    Measurement of illuminance uniformity on the target surface.
    Verification post-installation (LED)
    Periodic control of the performance of the installed LED system.
    Verification pre-installation (LED)
    Control of LED materials before mounting.
    Verification thermal (LED profile)
    Control of the temperature of the LED profile in operation.
    Verification test
    Performance verification test of the LED after installation.
    Vertical beam angle
    Vertical opening angle of the LED beam.
    Vertical beam spread
    Vertical distribution of the LED beam.
    Vertical cove
    Vertical cove with LED strip for lighting walls and columns.
    Vertical downlight
    LED downlight with beam directed vertically downwards.
    Vertical garden LED
    LED lighting for vertical gardens and green walls.
    Vertical illuminance
    Illuminance measured on a vertical plane.
    Vertical mounting
    Vertical mounting of the LED profile on a wall.
    Vertical pendant
    Vertically oriented suspended LED profile.
    Vertical profile
    LED profile mounted vertically on a wall.
    Vertical wall slot
    Vertical slot in the wall for a recessed LED profile.
    Very-high density strip
    LED strip with over 240 LEDs/m for absolute uniformity.
    VHB (3M Very High Bond)
    3M acrylic very-high-adhesion double-sided tape for professional mounting of LED strips on smooth surfaces.
    Vibration dampener
    Vibration damper for LED profiles in industrial environments.
    Vibration damper mount
    Anti-vibration mounting for industrial LEDs.
    Vibration isolation
    Isolation from vibrations for LED fixtures in industrial environments.
    Vibration proof connector
    Anti-vibration connector for LED systems in industrial environments.
    Vibration resistance
    Resistance of the LED system to mechanical vibrations.
    Vibration sensor LED
    Vibration sensor for structural monitoring with LED signalling.
    Vibration test
    Vibration resistance test for LED fixtures.
    Vibration test standard
    Standard for vibration resistance testing of LED fixtures.
    Video conference LED
    LED lighting optimised for video conferences; frontal, soft, high CRI.
    Video mapping LED
    Projection of video content on surfaces via addressable strips.
    Video wall LED
    High-resolution video wall composed of LED modules.
    Viewable angle
    Angle within which the content of a LED display is visible.
    Viewing angle
    Angle within which the LED source is visible; for displays and signage.
    Vinyl wrap profile
    LED profile wrapped in vinyl film for custom finish.
    Virtual commissioning
    Virtual commissioning of the LED system via simulation software.
    Virtual reality LED
    LED lighting for virtual and immersive reality environments.
    Virtual sunrise/sunset
    LED simulation of sunrise and sunset for Human Centric Lighting.
    Visibility distance
    Distance at which a LED signal is visible under specific conditions.
    Visible light communication (VLC)
    See LiFi. Communication via visible LED light.
    Visible light LED
    LED emitting in the visible spectrum (380–780 nm).
    Visible spectrum
    Visible portion of the electromagnetic spectrum (380–780 nm).
    Visual acuity
    Visual acuity; influenced by the quality of LED lighting.
    Visual alert LED
    Flashing LED visual alarm for event signalling.
    Visual comfort probability (VCP)
    Probability of visual comfort; metric for evaluating glare.
    Visual comfort zone
    Zone of visual comfort with optimal LED lighting.
    Visual display lighting
    LED lighting for displays and information screens.
    Visual display unit (VDU)
    Video terminal; LED lighting must avoid reflections on the screen.
    Visual field
    Visual field of the observer; LED lighting must take it into account in the design.
    Visual indicator LED
    Visual LED indicator for device status.
    Visual inspection
    Visual inspection of LED components for quality control.
    Visual inspection guide
    Guide to visual inspection of LED products for quality control.
    Visual merchandise LED
    LED lighting for visual merchandising in retail.
    Visual performance
    Visual performance guaranteed by adequate LED lighting.
    Visual task
    Visual task determining the required LED illuminance level.
    Visual uniformity
    Perceived uniformity of light on a surface illuminated by LEDs.
    Voice activation
    Activation of LED lighting via voice command.
    Voice control integration
    Integration of voice control in the LED lighting system.
    Voice controlled dimming
    Dimming of LED lighting via voice commands.
    Voice controlled scene
    Recall of LED lighting scenes via voice commands.
    Volt (V)
    Unit of measurement for electrical voltage; LED strips operate typically at 5 V, 12 V, 24 V or 48 V DC.
    Volt-ampere (VA)
    Unit of apparent power; relevant for sizing protection devices for LED systems.
    Voltage adjustment screw
    Output voltage adjustment screw on the LED power supply.
    Voltage booster
    Voltage booster to compensate for drop along long LED strips.
    Voltage compatibility
    Compatibility between power supply voltage and LED strip voltage.
    Voltage compensation
    Compensation of the voltage drop along the LED strip.
    Voltage converter
    Voltage converter for adapting the power supply to the LED system.
    Voltage detection relay
    Relay detecting voltage for LED system protection.
    Voltage disconnect relay
    Relay disconnecting the LED load in case of abnormal voltage.
    Voltage distribution
    Voltage distribution along the LED strip; drops towards the far end.
    Voltage divider
    Voltage divider used in sensing circuits for LEDs.
    Voltage doubler
    Voltage doubler in special LED power supply circuits.
    Voltage drop
    Progressive reduction of voltage along the LED strip with distance from the power supply; causes non-uniformity.
    Voltage drop 12 V
    Voltage reduction problem on 12 V LED strips over long runs.
    Voltage drop 24 V
    Voltage reduction on 24 V LED strips; less critical than 12 V.
    Voltage drop 48 V
    Minimal voltage reduction on 48 V LED strips; for very long runs.
    Voltage drop acceptable
    Maximum acceptable percentage reduction; typically 5%.
    Voltage fluctuation
    Mains voltage fluctuation that can cause LED brightness variations.
    Voltage forward (Vf)
    Voltage drop across the LED in conduction; typically 2.8–3.3 V for white LEDs.
    Voltage imbalance
    Voltage imbalance between channels of a multi-output LED power supply.
    Voltage measurement
    Measurement of voltage in the LED circuit with a voltmeter.
    Voltage monitor
    Voltage monitor for surveillance of the LED power supply.
    Voltage multiplier
    Voltage multiplier in special LED power supply circuits.
    Voltage of breakdown
    Voltage at which an LED component fails; protection limit.
    Voltage of mains
    Domestic mains voltage; in Europe 230 V AC, 50 Hz.
    Voltage of mains for LED
    Domestic mains voltage converted to DC for the LED strip.
    Voltage of output (power supply)
    Voltage delivered by the LED power supply; must match the strip requirement.
    Voltage of strip power supply
    Nominal voltage of the LED strip: 5 V, 12 V, 24 V or 48 V DC.
    Voltage of threshold LED
    Minimum voltage for LED switch-on; approximately 2–3 V for white LEDs.
    Voltage range
    Operating voltage range of the power supply or LED strip.
    Voltage reference
    Reference voltage in the LED driver control circuit.
    Voltage regulator
    Circuit stabilising voltage for the LED.
    Voltage regulator IC
    Integrated circuit voltage regulator for LED modules.
    Voltage sensor
    Voltage sensor for monitoring the LED circuit.
    Voltage source
    Voltage source; the constant-voltage power supply for LED strips.
    Voltage spike
    Transient voltage peak that can damage LEDs; surge protection required.
    Voltage stabilizer
    Voltage stabiliser protecting LEDs from mains fluctuations.
    Voltage tolerance
    Tolerance on the output voltage of the LED power supply.
    Voltmeter
    Instrument for measuring voltage in the LED circuit.
    Volume control (lighting design)
    Management of LED light in relation to the architectural volume of the space.
    Volumetric lighting
    LED lighting filling an architectural volume uniformly.
    Vortex cooling
    Vortex air cooling for very-high-power LEDs in special applications.
    ↑ Back to top

    W

    W-beam mount
    Mounting on double-T beam for industrial LED fixtures.
    W-shaped profile
    LED profile with W cross-section for double divergent emission.
    Wafer (LED)
    Semiconductor wafer on which thousands of LED dies are fabricated.
    Wafer dicing
    Cutting of the semiconductor wafer into individual LED dies.
    Wafer level packaging
    Assembly of LED package directly on the wafer for reduced costs.
    Wafer processing
    Manufacturing process of the LED chip on the semiconductor wafer.
    Wafer testing
    Electrical and optical testing of LED chips before wafer dicing.
    WAGO connector
    Professional spring connector for LED cables.
    Wake-up mode LED
    Dawn simulation with gradual increase in brightness and CCT.
    Walkover light
    Walkable LED light for floors and pathways.
    Wall angle bracket
    Corner bracket for wall mounting of LED profiles.
    Wall bracket
    Bracket for wall mounting of LED profiles.
    Wall bracket LED
    Wall-mounted LED sconce with mounting bracket.
    Wall cove profile
    LED profile for indirect lighting in wall coves.
    Wall cutout
    Hole in the wall for recessed mounting of the LED profile.
    Wall dimmer plate
    Wall dimmer plate coordinated with the room decor.
    Wall feed connector
    Wall-mounted power connector for LED profiles.
    Wall graze fixture
    LED fixture for grazing illumination of textured walls.
    Wall grazer
    LED fixture that grazes the wall with raking light to highlight texture.
    Wall light LED
    Wall-mounted LED sconce for decorative and functional lighting.
    Wall mount bracket set
    Set of brackets for wall mounting of the LED profile.
    Wall mount driver
    LED power supply for wall mounting.
    Wall mount profile
    LED profile designed for wall mounting.
    Wall mounting channel
    Wall channel for housing the LED profile.
    Wall niche LED
    LED lighting for wall niches with hidden strip.
    Wall plate
    Wall plate for dimmers and LED controllers.
    Wall recessed LED
    LED profile recessed into the wall.
    Wall sconce LED
    Wall-mounted LED sconce for indirect lighting.
    Wall slot
    Slot in the wall for insertion of a recessed LED profile.
    Wall slot profile
    LED profile for wall slot with linear light.
    Wall switch dimmer
    Wall-mounted dimmer for LED lighting control.
    Wall switch LED
    Wall-mounted switch for LED switching on.
    Wall washer distance
    Optimal distance of the LED fixture from the wall for uniform wall-wash effect.
    Wall washer optic
    Asymmetric optics for uniform distribution of LED light on the wall.
    Wall washer profile
    LED profile with integrated wall-washer optics for wall lighting.
    Wall-washer
    Fixture or LED profile illuminating a wall uniformly from below or above; enhances texture and colours.
    Wardrobe application
    LED lighting for wardrobes and dressing rooms; door sensors and high CRI.
    Warehouse high bay
    LED high bay for warehouses with high ceilings; high efficiency and sensors.
    Warehouse LED layout
    LED lighting layout for warehouses with uniformity calculation.
    Warehouse LED products
    Storage depot for LED components for distribution.
    Warehouse lighting
    LED lighting for warehouses; high bay and presence sensors.
    Warehouse sensor system
    Sensor system for automatic LED lighting control in the warehouse.
    Warm colour appearance
    Warm chromatic appearance of LED light at low CCT.
    Warm colour LED
    LED with warm colour temperature (below 3500 K).
    Warm colour LED strip
    LED strip with warm CCT below 3000 K.
    Warm colour rendering
    Colour rendering optimised for warm shades under LED lighting.
    Warm dim driver
    LED driver compatible with the warm dimming function.
    Warm dim strip
    LED strip that reduces CCT together with brightness, imitating incandescence.
    Warm dimming
    Function that automatically reduces colour temperature when brightness is lowered, imitating incandescent lamps.
    Warm glow
    Warm and soft light; characteristic of low-CCT LEDs with opal diffusers.
    Warm light
    Light with low colour temperature (≤3000 K); welcoming atmosphere for residential and hospitality environments.
    Warm start
    Quick restart of the LED after a brief switch-off.
    Warm start dimming
    Starting dimming from the level memorised before switch-off.
    Warm start test
    LED restart test after brief switch-off.
    Warm tone LED
    LED with warm shade for welcoming environments.
    Warm white (2200–3500 K)
    Colour temperature between 2200 K and 3500 K; yellowish-amber light, similar to incandescent lamps.
    Warm white extra (2200 K)
    Very warm CCT; similar to candlelight.
    Warm-up period
    Initial warm-up period before the LED reaches stability.
    Warning indicator LED
    Warning LED signalling abnormal conditions in the system.
    Warning label
    Warning label applied to the LED fixture.
    Warranty
    Warranty period offered by the manufacturer on LED components.
    Warranty card
    Warranty certificate of the LED product.
    Warranty claim
    Warranty claim for defects in LED products.
    Warranty extension
    Extension of the LED product warranty beyond the standard period.
    Warranty LED controller
    Period and conditions of warranty of the LED controller.
    Warranty LED diffuser
    Period and conditions of warranty of the LED profile diffuser.
    Warranty LED driver
    Period and conditions of warranty of the LED driver.
    Warranty LED power supply
    Period and conditions of warranty of the LED power supply.
    Warranty LED profile
    Period and conditions of warranty of the aluminium LED profile.
    Warranty LED strip
    Period and conditions of warranty of the LED strip.
    Warranty of colour rendering
    Manufacturer's warranty that the CRI of the LED strip remains compliant.
    Warranty of luminous flux
    Manufacturer's warranty on maintaining LED flux over time.
    Warranty of performance LED
    Manufacturer's warranty on the luminous performance of the LED over time.
    Warranty of uniformity LED
    Manufacturer's warranty on chromatic and flux consistency between LED strips.
    Warranty overall LED system
    Warranty period on the entire installed LED system.
    Warranty period
    Warranty period of the LED product; typically 3–7 years for professional use.
    Warranty registration
    Registration of the LED product warranty with the manufacturer.
    Warranty replacement
    Warranty replacement of a defective LED product.
    Warranty terms
    Terms and conditions of the LED product warranty.
    Wash light
    LED fixture distributing uniform light over a wide surface.
    Washdown LED
    LED fixture resistant to high-pressure washing for food-grade industries.
    Washroom LED
    LED lighting for washrooms; IP44 and high CRI.
    Waste heat recovery
    Recovery of heat generated by LEDs for other uses in the building.
    Water cooling LED
    Liquid cooling for very-high-power LEDs.
    Water feature LED
    LED lighting for fountains, waterfalls and water features.
    Water ingress
    Water penetration into the LED fixture; prevented by the IP protection rating.
    Water jet resistance test
    Water jet resistance test for IP65/IP67 LED fixtures.
    Water resistance
    Water resistance of LED components; defined by the IP rating.
    Water resistant cable gland
    Water-resistant cable gland for outdoor LED systems.
    Water vapor transmission
    Water vapour transmission through LED protection materials.
    Waterfront LED
    LED lighting for seafronts and waterfront areas.
    Waterproof
    Water protection for LED strips; IP67/IP68.
    Waterproof amplifier
    LED amplifier with IP rating for outdoor installations.
    Waterproof connector
    Waterproof connector for LED joints in damp or outdoor environments.
    Waterproof driver
    Power supply with IP67/IP68 protection for outdoor use.
    Watt (W)
    Unit of measurement for electrical power; in LED strips expressed in Watts per metre (W/m).
    Watt per metre (W/m)
    Electrical power consumed per linear metre of LED strip; fundamental sizing parameter.
    Wave effect LED
    Wave light effect on addressable LED strips.
    Wave soldering
    Wave soldering for rigid PCBs in the production of LED bars.
    Wavelength
    Physical parameter determining the colour of light emitted by the LED.
    Wavelength binning
    Classification of LED chips by emission wavelength.
    Wavelength range
    Range of wavelengths emitted by the LED.
    Wavelength shift
    Variation of the LED emission wavelength with temperature.
    Wavelength tolerance
    Tolerance on the emission wavelength of the LED chip.
    Weather forecast integration
    Integration of weather forecasts in the control of outdoor LED lighting.
    Weather resistant adhesive
    Weather-resistant adhesive for outdoor LED strips.
    Weather station integration
    Integration with a weather station for automatic outdoor LED control.
    Weathering resistance
    Resistance to weathering agents of LED system materials.
    Weathering test
    Weathering resistance test for LED profiles and diffusers.
    Weatherproof
    Weather-resistant; for outdoor LED fixtures.
    Web control interface
    Web interface for managing the LED system from a browser.
    Web shop LED
    Online shop specialised in the sale of LED products.
    Web-based control
    Management of the LED system via web interface from a browser.
    WEEE (directive)
    European directive on waste electrical and electronic equipment; regulates the disposal of LED products.
    Weight bearing
    Load-bearing capacity of the support for heavy LED fixtures.
    Weight of the LED profile
    Mass per linear metre of the LED profile; for structural calculation.
    Wellness application
    LEDs for wellness centers; chromotherapy and relaxing scenarios.
    Wellness visual LED
    State of visual comfort of occupants guaranteed by quality LED lighting.
    Wet contact rating
    Classification of contacts for operation in damp environments.
    Wet location
    Environment with direct exposure to water; requires strips and power supplies with IP67/IP68 rating.
    Wet location fixture
    LED fixture certified for environments with direct water contact.
    Wet rated
    LED fixture certified for direct water exposure.
    Wettability
    Ability of metallic surfaces of the LED strip to accept soldering.
    White balance
    Adjustment of white balance between different LED sources.
    White colour rendering
    Colour rendering of white LED light; measured with CRI or TM-30.
    White D50
    CIE reference illuminant at 5003 K; used in graphic arts and LED photography.
    White D65
    CIE reference illuminant at 6504 K; standard for CRI evaluation of LEDs.
    White LED
    LED emitting white light; obtained by phosphor conversion on a blue chip or by RGB mixing.
    White LED chip
    LED chip emitting white light via phosphor conversion.
    White noise (LED)
    Broadband electrical noise in the LED driver; can cause flicker.
    White point
    White point in the CIE diagram; the chromatic target for white LEDs.
    White standard
    White reference for calibrating LED photometric instruments.
    White tuning
    Fine adjustment of colour temperature in tunable white LED strips.
    Wi-Fi
    Wireless protocol at 2.4/5 GHz for controlling LED systems via apps and voice assistants (Alexa, Google).
    Wide angle
    Wide emission angle (above 100 degrees); typical of LED strips.
    Wide angle diffuser
    Diffuser widening the emission angle of the LED strip.
    Wide area network (WAN)
    Wide-area network for remote management of distributed LED systems.
    Wide beam
    Wide LED beam for diffused lighting.
    Wide input range
    LED power supply with wide input voltage range (100–277 V AC).
    Widget LED
    Component in the smart home app for quick LED lighting control.
    Width of the LED profile
    External transverse dimension of the LED profile.
    Width of the strip
    Transverse measurement of the LED strip (typically 5, 8, 10 or 12 mm); determines compatibility with the profile.
    Width of the strip 3 mm
    Ultra-narrow 3 mm LED strip for miniaturised profiles.
    Width of the strip 5 mm
    Compact 5 mm LED strip for slim profiles.
    Width of the strip 8 mm
    8 mm LED strip; common format for standard profiles.
    Width of the strip 10 mm
    10 mm LED strip; the most widespread standard format.
    Width of the strip 12 mm
    12 mm LED strip; for wide profiles and high power.
    Width of the strip 15 mm
    15 mm LED strip; for high-power or double-row strips.
    Width of the strip 20 mm
    20 mm LED strip; for very-high-power multi-row strips.
    WiFi controller for LED strip
    WiFi controller for app-based control of LED strips.
    WiFi dimmer for LED
    WiFi-connected dimmer for remote control of LED brightness.
    WiFi mesh LED
    WiFi mesh network for controlling LED fixtures distributed throughout a building.
    Wind load
    Wind load on outdoor LED fixtures; parameter for sizing supports.
    Window display LED
    LED lighting for shop windows.
    Wine cellar application
    LED lighting for wine cellars; low UV/IR emission and warm CCT.
    Wine cellar LED
    LED lighting for wine cellars; warm CCT and UV protection.
    Wire gauge
    Wire gauge; determines the current-carrying capacity and voltage drop.
    Wire management
    Orderly management of cables in the LED installation.
    Wire nut
    Cap connector for joining LED cables in junction boxes.
    Wire of suspension LED
    Steel cable for suspending LED profiles from the ceiling.
    Wireless bridge
    Wireless bridge for connecting two distant LED network segments.
    Wireless commissioning
    Wireless configuration of LED devices during commissioning.
    Wireless controller
    LED controller with wireless interface (Wi-Fi, Zigbee, Bluetooth, RF).
    Wireless dimmer
    Dimmer communicating wirelessly with the LED driver.
    Wireless dimming module
    Wireless dimming module to install behind the switch.
    Wireless gateway
    Device connecting the wireless LED network to the wired network or internet.
    Wireless mesh network
    Wireless mesh network for distributed LED control.
    Wireless protocol
    Wireless communication protocol for smart LED systems.
    Wireless range
    Range of the LED controller wireless communication.
    Wireless relay
    Wirelessly controlled relay for LED on/off control.
    Wireless repeater
    Wireless repeater for extending the range of the LED network.
    Wireless sensor
    Wireless sensor for automatic LED lighting control.
    Wiring bus
    Two-wire system for DALI or KNX communication.
    Wiring of power LED
    LED system power cables sized for current and distance.
    Wiring of signal LED
    Cables for LED control signals: DMX, DALI, 0–10 V, SPI.
    Wiring point-to-point
    Direct power supply-to-strip connection without branches.
    Wiring star LED
    Direct connection of every LED strip to the power supply without branches.
    Wiring structured
    Orderly and standardised organisation of LED system cables with conduits and terminals.
    WLED firmware
    Open-source firmware for controlling addressable LED strips via Wi-Fi.
    Wood mounting
    Mounting of the LED profile on a wooden surface via screws or clips.
    Woodgrain finish
    Wood-effect finish on LED profiles for integration with furniture.
    Work area lighting
    LED lighting of work zones compliant with standard EN 12464-1.
    Work light
    LED light for temporary lighting of construction sites and work areas.
    Work plane
    Reference work surface for LED illuminance calculation; typically 0.85 m.
    Work surface (h = 0.85 m)
    Standard height of the work surface for LED illuminance calculation.
    Workbench LED
    LED lighting for workbenches and laboratories.
    Working current
    Actual operating current of the LED strip under load.
    Working distance
    Operating distance between LED fixture and illuminated surface.
    Working temperature
    Operating temperature range of the LED system.
    Working voltage
    Actual operating voltage of the LED strip under load.
    Workspace lighting
    LED lighting for workspaces; visual comfort and productivity.
    WS2801
    Addressable LED chip with two-wire SPI protocol; predecessor of the WS2812.
    WS2811
    External control chip for addressable strips; one controller per 3 LEDs.
    WS2812B
    Addressable RGB LED chip with integrated controller; driveable with a single data wire for dynamic pixel effects.
    WS2813
    Evolution of the WS2812B with a backup data line.
    WS2814
    Addressable RGBW LED strip at 12 V with WS2812-compatible protocol.
    WS2815
    Evolution of the WS2812B powered at 12 V with backup data line; more reliable over long runs.
    WS2818
    WS2812 variant with breakpoint signal for greater reliability.
    ↑ Back to top

    X

    X-axis
    Horizontal axis in the CIE diagram; chromatic coordinate x.
    X-band radar sensor
    X-band radar sensor for presence detection in LED systems.
    X-bracket
    Cross bracket for crossed mounting of LED profiles.
    X-connector
    X-shaped connector for four-way crossings between LED profile sections.
    X-junction
    Cross junction between four LED profile sections.
    X-mount
    Cross-shaped support for mounting LED fixtures.
    X-pattern
    Cross-shaped light distribution pattern projected by special LED optics.
    X-profile
    LED profile with X cross-section for quad light emission.
    X-ray fluorescence
    XRF analysis for verifying the RoHS compliance of LED components.
    X-ray inspection
    X-ray inspection for quality control of SMD solder joints on LED strips.
    Xenon arc lamp
    Xenon lamp replaced by LEDs in many professional applications.
    Xenon equivalent
    Equivalent xenon power of an LED source.
    XHP LED (Cree)
    Cree XHP family of very-high-power LED chips for professional fixtures.
    Xicato
    Manufacturer of high-quality LED modules for architectural lighting.
    XLR 3-pin
    3-contact XLR version for DMX in many installations.
    XLR 3-to-5 pin adapter
    Adapter from XLR 3-pin to 5-pin for LED DMX cabling.
    XLR 5-pin
    5-contact XLR version recommended by the DMX512 standard.
    XLR adapter
    Adapter between XLR connector and other formats for DMX wiring.
    XLR breakout
    Distribution of the DMX signal from XLR connector to multiple outputs.
    XLR cable
    Cable with XLR connectors for DMX512 signal.
    XLR cable DMX 3 pin
    Cable with 3-pin XLR connectors for DMX512 LED signal.
    XLR cable DMX 5 pin
    Cable with 5-pin XLR connectors for professional DMX512 LED signal.
    XLR connector
    Professional 3 or 5-pin connector used for DMX512 signal wiring in LED stage lighting.
    XLR coupler
    Through joint for connecting two DMX cables with XLR connectors.
    XLR daisy chain
    Series connection of LED fixtures via XLR connectors for DMX.
    XLR extension cable
    Extension cable with XLR connectors for the LED DMX line.
    XLR female connector
    Female XLR connector for DMX input on the LED fixture.
    XLR gender changer
    Adapter changing the XLR connector gender from male to female.
    XLR inline adapter
    Inline XLR adapter for conversion from 3-pin to 5-pin or vice versa.
    XLR male connector
    Male XLR connector for DMX output on the LED fixture.
    XLR panel mount
    Panel-mount XLR connector for fixed installation on LED equipment.
    XLR splitter
    DMX signal splitter via XLR connectors.
    XLR to RJ45 adapter
    Adapter from XLR to RJ45 for distributing the DMX signal over Ethernet cable.
    XLR wall plate
    Wall plate with XLR connector for fixed DMX sockets.
    XML configuration format
    XML file format for the configuration and profiles of LED fixtures in software.
    XP-series LED (Cree)
    Cree XP family of LED chips for high-power applications.
    XTE LED (Cree)
    Cree XTE high-efficiency LED chip for commercial fixtures.
    XY chromatic coordinates
    Pair of values in the CIE 1931 diagram uniquely identifying the colour emitted by a LED.
    ↑ Back to top

    Y

    Y-adapter
    Y-adapter for splitting LED power supply or signal.
    Y-adapter cable
    Y-adapter cable for splitting LED power supply.
    Y-axis
    Vertical axis in the CIE diagram; chromatic coordinate y.
    Y-branch connector
    Y-branch connector for LED circuits.
    Y-cable
    Y-cable for splitting LED power supply or signal.
    Y-connector
    Y-shaped connector splitting a power supply or signal into two outputs for connecting LED strips in parallel.
    Y-connector female
    Y-connector with two female outputs for splitting LED power supply.
    Y-connector male
    Y-connector with two male inputs for converging LED power supply.
    Y-distribution
    Y-distribution of power supply from one point to two LED strips.
    Y-mount
    Fork support for two-axis adjustable LED projectors.
    Y-piece junction
    Y-junction for branching a secondary LED line.
    Y-splice
    Y-junction for branching a LED cable from a main line.
    YAG (Yttrium Aluminium Garnet)
    Yellow ceramic phosphor (Ce:YAG) used for converting blue LED chip light to white light.
    YAG phosphor LED
    Cerium-doped Yttrium Aluminium Garnet phosphor for white LEDs.
    Yacht LED lighting
    LED lighting for yachts and luxury vessels.
    Yard light LED
    LED light for courtyards and residential outdoor spaces.
    Year-round lighting
    LED lighting designed for continuous operation throughout the year.
    Yellow aging
    Yellowing of the LED diffuser over time due to UV or thermal degradation.
    Yellow filter
    Yellow filter for LED strips; for special applications and signage.
    Yellow LED (570–590 nm)
    Yellow LED; for signage and indicators.
    Yellow LED indicator
    Yellow LED indicator for status signalling.
    Yellow phosphor
    Yellow phosphor (YAG:Ce) for converting blue LED light to white.
    Yellow shift
    Chromatic shift towards yellow that can occur in white LEDs due to phosphor degradation over time.
    Yellow-green LED
    Yellow-green LED (565–575 nm); for indicators and signage.
    Yield (production rate)
    Percentage of compliant LED chips produced from a wafer.
    Yield improvement
    Improvement of the production yield in LED chip manufacturing.
    Yield management
    Management of production yield to optimise LED quality.
    Yield rate
    Percentage of compliant LED products compared to total production.
    Yield test
    Yield test for verifying the percentage of compliant LED chips.
    Yoke adapter
    Adapter for fork bracket on LED fixtures with different mounting.
    Yoke bolt
    Fixing bolt for the fork bracket of an LED projector.
    Yoke mount
    Mounting with fork bracket for adjustable LED projectors.
    Yoke mount bracket
    Mounting bracket with fork for adjustable LED projectors.
    YoYo mount
    Cable retractor for adjusting the height of pendant LED profiles.
    YUV colour model
    Video colour model applied to LED displays and matrices.
    YUV colour space
    Video colour space; relevant for LED displays and matrices.
    ↑ Back to top

    Z

    Z-axis mount
    Mounting along the Z-axis (vertical) for LED fixtures.
    Z-bend connector
    Z-shaped connector for LED strips with a change of level.
    Z-bracket
    Z-bracket for mounting LED profiles on surfaces with a height difference.
    Z-connector
    Z-shaped connector for joining LED strips with a height difference between sections.
    Z-fold strip
    Z-folded LED strip for compact backlighting.
    Z-mount bracket
    Z-bracket for mounting with height difference between LED profiles.
    Z-Wave
    Low-frequency wireless mesh protocol (868 MHz in Europe) for smart home control of LED lighting.
    Z-wave dimmer module
    Z-Wave dimmer module for wireless LED control.
    Z-wave gateway
    Z-Wave gateway for connecting LED devices to the home network.
    Z-wave hub
    Z-Wave hub for managing LED devices in a mesh network.
    Z-wave LED controller
    LED controller based on the Z-Wave protocol for home automation.
    Z-wave light switch
    Z-Wave light switch for wireless LED control.
    Z-wave motion sensor
    Z-Wave motion sensor for automatic LED activation.
    Z-wave relay
    Z-Wave relay for remote on/off control of LED circuits.
    Z-wave scene controller
    Z-Wave controller for managing LED scenes.
    Z-wave sensor
    Z-Wave sensor for automatic LED lighting control.
    Z-wave smart plug
    Z-Wave smart plug for on/off control of LED fixtures.
    Zener breakdown voltage
    Breakdown voltage of the Zener diode used for LED protection.
    Zener clamp circuit
    Voltage limiting circuit with Zener diode for LED protection.
    Zener diode
    Diode used as protection against overvoltages in LED strip circuits.
    Zener protection circuit
    Protection circuit with Zener diode against overvoltages in the LED.
    Zener voltage
    Zener voltage of the protection diode in the LED circuit.
    Zener voltage regulator
    Zener voltage regulator for LED protection.
    Zero clearance mount
    Zero-distance mounting from the surface for ultra-slim LED profiles.
    Zero cross detection
    Detection of the zero crossing of the AC wave; for synchronised LED dimmers.
    Zero cross switching
    Switching at the AC zero crossing to reduce LED interference.
    Zero crossing dimmer
    Dimmer switching at zero crossing to reduce interference.
    Zero current switching
    Zero-current switching for silent LED dimmers.
    Zero defect
    Zero-defect objective in the production of LED strips.
    Zero delay
    Zero delay in the response of the LED system to the control command.
    Zero emission LED
    LED system powered by renewable sources with zero CO₂ emissions.
    Zero energy building LED
    LED lighting for zero-energy buildings.
    Zero flicker
    Total absence of flicker; objective of the best LED drivers.
    Zero light pollution
    Zero light pollution objective with full-cutoff LED fixtures.
    Zero maintenance
    LED system designed to require no maintenance during its useful lifetime.
    Zero standby power
    LED power supply with zero standby consumption; circuit completely disconnected.
    Zero waste manufacturing
    Zero-waste LED production with complete recycling of waste materials.
    Zero-ten volt (0–10 V)
    Analogue dimming protocol from 0 to 10 V DC.
    Zhaga (standard)
    Industry consortium defining mechanical specifications and interfaces for interchangeable LED modules.
    Zhaga base
    Standardised Zhaga mechanical base for interchangeable LED modules.
    Zhaga Book 1
    Specification for round ceiling-mounted LED modules.
    Zhaga Book 2
    Specification for rectangular LED modules.
    Zhaga Book 3
    Specification for interchangeable linear LED modules.
    Zhaga Book 5
    Specification for large-format linear LED modules.
    Zhaga Book 7
    Specification for round LED modules with spotlight fitting.
    Zhaga Book 9
    Specification for spot and accent LED modules.
    Zhaga Book 11
    Specification for round and square ceiling-mounted LED modules with standardised fitting.
    Zhaga Book 12
    Specification for small-format linear LED modules.
    Zhaga Book 14
    Specification for compact downlight LED modules.
    Zhaga Book 18
    Specification for outdoor LED modules with DALI interface.
    Zhaga connector
    Standardised Zhaga connector for interchangeable LED modules.
    Zhaga interface
    Standardised Zhaga mechanical and electrical interface.
    Zhaga module
    LED module compliant with the Zhaga standard for interchangeability.
    Zhaga Smart Sensing
    Zhaga platform for interchangeable smart sensors on LED fixtures.
    Zhaga socket
    Standardised Zhaga socket for mounting LED modules.
    Zhaga-D4i
    Combination of the Zhaga mechanical standard with the DALI-2 interface for smart and interchangeable LED fixtures.
    Zhaga-D4i connector
    Zhaga connector with integrated DALI-2 interface.
    Zigbee
    Low-consumption wireless mesh protocol (IEEE 802.15.4) widely used for smart home LED control.
    Zigbee 3.0
    Unified version of the Zigbee protocol ensuring interoperability between LED devices from different brands.
    Zigbee 3.0 certification
    Zigbee 3.0 standard compliance certification for LED devices.
    Zigbee 3.0 device
    Zigbee 3.0 certified LED device for interoperability.
    Zigbee 3.0 light
    LED lamp or strip with integrated Zigbee 3.0 communication.
    Zigbee address
    Network address of the LED device in the Zigbee network.
    Zigbee binding
    Direct association between two Zigbee LED devices without going through the coordinator.
    Zigbee bridge
    Bridge between Zigbee LED network and other networks (Wi-Fi, Ethernet).
    Zigbee bridge hub
    Zigbee bridge hub for connecting LEDs to the home network.
    Zigbee bulb
    LED bulb with integrated Zigbee module.
    Zigbee channel
    Radio channel selected for Zigbee LED communication.
    Zigbee cluster
    Set of standardised functionalities in a Zigbee LED device.
    Zigbee colour control
    LED colour control via Zigbee commands.
    Zigbee commissioning
    Configuration of LED devices in the Zigbee network.
    Zigbee compatible LED
    LED compatible with the Zigbee communication protocol.
    Zigbee controller hub
    Controller hub for centralised management of Zigbee LEDs.
    Zigbee coordinator
    Device managing the Zigbee network as gateway.
    Zigbee device pairing
    Procedure for associating an LED device to the Zigbee network.
    Zigbee dimmer module
    Zigbee dimmer module for wireless LED brightness control.
    Zigbee dimmer switch
    Zigbee dimmer switch for wireless LED control.
    Zigbee end device
    Terminal device in a Zigbee network; typically an LED driver.
    Zigbee firmware update
    Firmware update of Zigbee LED devices.
    Zigbee Green Power
    Profile for battery-free energy-harvesting LED devices.
    Zigbee group
    Group of Zigbee LED devices controllable simultaneously.
    Zigbee hub LED
    Zigbee hub for managing smart home LED devices.
    Zigbee LED driver
    LED driver with integrated Zigbee module for wireless control.
    Zigbee LED strip controller
    Zigbee controller specific for RGB and CCT LED strips.
    Zigbee Light Link (ZLL)
    Zigbee profile specific for lighting control.
    Zigbee light sensor
    Zigbee light sensor for LED daylight harvesting.
    Zigbee mesh network
    Zigbee mesh network for communication between distributed LED devices.
    Zigbee motion sensor
    Zigbee motion sensor for automatic LED activation.
    Zigbee network configuration
    Configuration of the Zigbee network for LED control.
    Zigbee network key
    Security key protecting communication in the Zigbee LED network.
    Zigbee network map
    Map of the Zigbee network with all connected LED devices.
    Zigbee OTA update
    Over-the-Air firmware update of Zigbee LED devices.
    Zigbee outdoor sensor
    Outdoor Zigbee sensor for garden LED control.
    Zigbee plug
    Zigbee smart plug for on/off control of plug-in LED fixtures.
    Zigbee power meter
    Zigbee power meter for monitoring LED consumption.
    Zigbee range extender
    Zigbee range extender for reaching distant LEDs.
    Zigbee remote control
    Zigbee remote control for wireless LED lighting control.
    Zigbee router
    Zigbee device that repeats the signal extending the LED network coverage.
    Zigbee scene
    Lighting scene stored and recallable in Zigbee LED devices.
    Zigbee smart bulb
    Smart LED bulb with integrated Zigbee communication.
    Zigbee smart switch
    Zigbee smart switch for LED control.
    Zigbee switch
    Zigbee switch for on/off control of LED lighting.
    Zigbee temperature sensor
    Zigbee temperature sensor for LED thermal management.
    Zigbee touchlink
    Proximity-based direct association procedure between Zigbee LED devices.
    Zigbee wall switch
    Wall-mounted Zigbee switch for LED lighting control.
    Zinc plated bracket
    Zinc-plated bracket for mounting LED profiles in damp environments.
    Zinc plated clip
    Zinc-plated clip for fixing LED profiles.
    Zinc plated screw
    Zinc-plated screw for mounting LED profiles.
    Zone boundary
    Boundary between LED zones with independent lighting.
    Zone configuration
    Configuration of the zones of the LED system in the control system.
    Zone control
    Separate management of different areas of the LED system.
    Zone controller module
    Controller module dedicated to a specific LED zone.
    Zone dimming
    Independent dimming for each LED zone.
    Zone dimming schedule
    Programming of dimming for each LED zone.
    Zone indicator
    LED indicator showing which zone is active.
    Zone map
    Map of the LED system zones with fixture assignment.
    Zone master
    Main controller of a LED zone that manages the slaves.
    Zone occupancy
    Occupancy state of a zone; for automatic LED control.
    Zone of LED lighting
    Area of the environment served by a group of LED fixtures.
    Zone override
    Manual override of the automatic programme of a LED zone.
    Zone programming
    Programming of LED system zones with scenes and automations.
    Zone relay
    Relay dedicated to a zone of the LED system.
    Zone selection switch
    Selector for the LED zone to be controlled.
    Zone sensor
    Sensor dedicated to a specific zone of the LED system.
    Zone sensor assignment
    Assignment of sensors to specific LED zones.
    Zone switch
    Switch dedicated to a zone of the LED system.
    Zone temperature
    Zone temperature monitored for thermal LED control.
    Zone thermal
    Area of the profile or PCB where heat concentrates; thermal design aims to distribute temperature uniformly.
    Zoning layout drawing
    Drawing of the zoning layout of the LED system.
    Zoning plan
    Zoning plan of LED lighting in a project.
    ↑ Back to top
    Professional LED Glossary — Technical reference for installers, lighting designers and architects
    This article was developed with the support of artificial intelligence and subsequently reviewed, corrected, and validated by the Ledpoint.it technical team, which guarantees its reliability and compliance with official sources.